1/*
2 * intc-simr.c
3 *
4 * Interrupt controller code for the ColdFire 5208, 5207 & 532x parts.
5 *
6 * (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
7 *
8 * This file is subject to the terms and conditions of the GNU General Public
9 * License.  See the file COPYING in the main directory of this archive
10 * for more details.
11 */
12
13#include <linux/types.h>
14#include <linux/init.h>
15#include <linux/kernel.h>
16#include <linux/interrupt.h>
17#include <linux/irq.h>
18#include <linux/io.h>
19#include <asm/coldfire.h>
20#include <asm/mcfsim.h>
21#include <asm/traps.h>
22
23/*
24 *	The EDGE Port interrupts are the fixed 7 external interrupts.
25 *	They need some special treatment, for example they need to be acked.
26 */
27#ifdef CONFIG_M520x
28/*
29 *	The 520x parts only support a limited range of these external
30 *	interrupts, only 1, 4 and 7 (as interrupts 65, 66 and 67).
31 */
32#define	EINT0	64	/* Is not actually used, but spot reserved for it */
33#define	EINT1	65	/* EDGE Port interrupt 1 */
34#define	EINT4	66	/* EDGE Port interrupt 4 */
35#define	EINT7	67	/* EDGE Port interrupt 7 */
36
37static unsigned int irqebitmap[] = { 0, 1, 4, 7 };
38static unsigned int inline irq2ebit(unsigned int irq)
39{
40	return irqebitmap[irq - EINT0];
41}
42
43#else
44
45/*
46 *	Most of the ColdFire parts with the EDGE Port module just have
47 *	a strait direct mapping of the 7 external interrupts. Although
48 *	there is a bit reserved for 0, it is not used.
49 */
50#define	EINT0	64	/* Is not actually used, but spot reserved for it */
51#define	EINT1	65	/* EDGE Port interrupt 1 */
52#define	EINT7	71	/* EDGE Port interrupt 7 */
53
54static unsigned int inline irq2ebit(unsigned int irq)
55{
56	return irq - EINT0;
57}
58
59#endif
60
61/*
62 *	There maybe one, two or three interrupt control units, each has 64
63 *	interrupts. If there is no second or third unit then MCFINTC1_* or
64 *	MCFINTC2_* defines will be 0 (and code for them optimized away).
65 */
66
67static void intc_irq_mask(struct irq_data *d)
68{
69	unsigned int irq = d->irq - MCFINT_VECBASE;
70
71	if (MCFINTC2_SIMR && (irq > 128))
72		__raw_writeb(irq - 128, MCFINTC2_SIMR);
73	else if (MCFINTC1_SIMR && (irq > 64))
74		__raw_writeb(irq - 64, MCFINTC1_SIMR);
75	else
76		__raw_writeb(irq, MCFINTC0_SIMR);
77}
78
79static void intc_irq_unmask(struct irq_data *d)
80{
81	unsigned int irq = d->irq - MCFINT_VECBASE;
82
83	if (MCFINTC2_CIMR && (irq > 128))
84		__raw_writeb(irq - 128, MCFINTC2_CIMR);
85	else if (MCFINTC1_CIMR && (irq > 64))
86		__raw_writeb(irq - 64, MCFINTC1_CIMR);
87	else
88		__raw_writeb(irq, MCFINTC0_CIMR);
89}
90
91static void intc_irq_ack(struct irq_data *d)
92{
93	unsigned int ebit = irq2ebit(d->irq);
94
95	__raw_writeb(0x1 << ebit, MCFEPORT_EPFR);
96}
97
98static unsigned int intc_irq_startup(struct irq_data *d)
99{
100	unsigned int irq = d->irq;
101
102	if ((irq >= EINT1) && (irq <= EINT7)) {
103		unsigned int ebit = irq2ebit(irq);
104		u8 v;
105
106#if defined(MCFEPORT_EPDDR)
107		/* Set EPORT line as input */
108		v = __raw_readb(MCFEPORT_EPDDR);
109		__raw_writeb(v & ~(0x1 << ebit), MCFEPORT_EPDDR);
110#endif
111
112		/* Set EPORT line as interrupt source */
113		v = __raw_readb(MCFEPORT_EPIER);
114		__raw_writeb(v | (0x1 << ebit), MCFEPORT_EPIER);
115	}
116
117	irq -= MCFINT_VECBASE;
118	if (MCFINTC2_ICR0 && (irq > 128))
119		__raw_writeb(5, MCFINTC2_ICR0 + irq - 128);
120	else if (MCFINTC1_ICR0 && (irq > 64))
121		__raw_writeb(5, MCFINTC1_ICR0 + irq - 64);
122	else
123		__raw_writeb(5, MCFINTC0_ICR0 + irq);
124
125	intc_irq_unmask(d);
126	return 0;
127}
128
129static int intc_irq_set_type(struct irq_data *d, unsigned int type)
130{
131	unsigned int ebit, irq = d->irq;
132	u16 pa, tb;
133
134	switch (type) {
135	case IRQ_TYPE_EDGE_RISING:
136		tb = 0x1;
137		break;
138	case IRQ_TYPE_EDGE_FALLING:
139		tb = 0x2;
140		break;
141	case IRQ_TYPE_EDGE_BOTH:
142		tb = 0x3;
143		break;
144	default:
145		/* Level triggered */
146		tb = 0;
147		break;
148	}
149
150	if (tb)
151		irq_set_handler(irq, handle_edge_irq);
152
153	ebit = irq2ebit(irq) * 2;
154	pa = __raw_readw(MCFEPORT_EPPAR);
155	pa = (pa & ~(0x3 << ebit)) | (tb << ebit);
156	__raw_writew(pa, MCFEPORT_EPPAR);
157
158	return 0;
159}
160
161static struct irq_chip intc_irq_chip = {
162	.name		= "CF-INTC",
163	.irq_startup	= intc_irq_startup,
164	.irq_mask	= intc_irq_mask,
165	.irq_unmask	= intc_irq_unmask,
166};
167
168static struct irq_chip intc_irq_chip_edge_port = {
169	.name		= "CF-INTC-EP",
170	.irq_startup	= intc_irq_startup,
171	.irq_mask	= intc_irq_mask,
172	.irq_unmask	= intc_irq_unmask,
173	.irq_ack	= intc_irq_ack,
174	.irq_set_type	= intc_irq_set_type,
175};
176
177void __init init_IRQ(void)
178{
179	int irq, eirq;
180
181	/* Mask all interrupt sources */
182	__raw_writeb(0xff, MCFINTC0_SIMR);
183	if (MCFINTC1_SIMR)
184		__raw_writeb(0xff, MCFINTC1_SIMR);
185	if (MCFINTC2_SIMR)
186		__raw_writeb(0xff, MCFINTC2_SIMR);
187
188	eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0) +
189						(MCFINTC2_ICR0 ? 64 : 0);
190	for (irq = MCFINT_VECBASE; (irq < eirq); irq++) {
191		if ((irq >= EINT1) && (irq <= EINT7))
192			irq_set_chip(irq, &intc_irq_chip_edge_port);
193		else
194			irq_set_chip(irq, &intc_irq_chip);
195		irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
196		irq_set_handler(irq, handle_level_irq);
197	}
198}
199
200