1#ifndef _ASM_POWERPC_MPIC_H 2#define _ASM_POWERPC_MPIC_H 3#ifdef __KERNEL__ 4 5#include <linux/irq.h> 6#include <asm/dcr.h> 7#include <asm/msi_bitmap.h> 8 9/* 10 * Global registers 11 */ 12 13#define MPIC_GREG_BASE 0x01000 14 15#define MPIC_GREG_FEATURE_0 0x00000 16#define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000 17#define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16 18#define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00 19#define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8 20#define MPIC_GREG_FEATURE_VERSION_MASK 0xff 21#define MPIC_GREG_FEATURE_1 0x00010 22#define MPIC_GREG_GLOBAL_CONF_0 0x00020 23#define MPIC_GREG_GCONF_RESET 0x80000000 24/* On the FSL mpic implementations the Mode field is expand to be 25 * 2 bits wide: 26 * 0b00 = pass through (interrupts routed to IRQ0) 27 * 0b01 = Mixed mode 28 * 0b10 = reserved 29 * 0b11 = External proxy / coreint 30 */ 31#define MPIC_GREG_GCONF_COREINT 0x60000000 32#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 33#define MPIC_GREG_GCONF_NO_BIAS 0x10000000 34#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff 35#define MPIC_GREG_GCONF_MCK 0x08000000 36#define MPIC_GREG_GLOBAL_CONF_1 0x00030 37#define MPIC_GREG_VENDOR_0 0x00040 38#define MPIC_GREG_VENDOR_1 0x00050 39#define MPIC_GREG_VENDOR_2 0x00060 40#define MPIC_GREG_VENDOR_3 0x00070 41#define MPIC_GREG_VENDOR_ID 0x00080 42#define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000 43#define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16 44#define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00 45#define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8 46#define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff 47#define MPIC_GREG_PROCESSOR_INIT 0x00090 48#define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0 49#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0 50#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0 51#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0 52#define MPIC_GREG_IPI_STRIDE 0x10 53#define MPIC_GREG_SPURIOUS 0x000e0 54#define MPIC_GREG_TIMER_FREQ 0x000f0 55 56/* 57 * 58 * Timer registers 59 */ 60#define MPIC_TIMER_BASE 0x01100 61#define MPIC_TIMER_STRIDE 0x40 62#define MPIC_TIMER_GROUP_STRIDE 0x1000 63 64#define MPIC_TIMER_CURRENT_CNT 0x00000 65#define MPIC_TIMER_BASE_CNT 0x00010 66#define MPIC_TIMER_VECTOR_PRI 0x00020 67#define MPIC_TIMER_DESTINATION 0x00030 68 69/* 70 * Per-Processor registers 71 */ 72 73#define MPIC_CPU_THISBASE 0x00000 74#define MPIC_CPU_BASE 0x20000 75#define MPIC_CPU_STRIDE 0x01000 76 77#define MPIC_CPU_IPI_DISPATCH_0 0x00040 78#define MPIC_CPU_IPI_DISPATCH_1 0x00050 79#define MPIC_CPU_IPI_DISPATCH_2 0x00060 80#define MPIC_CPU_IPI_DISPATCH_3 0x00070 81#define MPIC_CPU_IPI_DISPATCH_STRIDE 0x00010 82#define MPIC_CPU_CURRENT_TASK_PRI 0x00080 83#define MPIC_CPU_TASKPRI_MASK 0x0000000f 84#define MPIC_CPU_WHOAMI 0x00090 85#define MPIC_CPU_WHOAMI_MASK 0x0000001f 86#define MPIC_CPU_INTACK 0x000a0 87#define MPIC_CPU_EOI 0x000b0 88#define MPIC_CPU_MCACK 0x000c0 89 90/* 91 * Per-source registers 92 */ 93 94#define MPIC_IRQ_BASE 0x10000 95#define MPIC_IRQ_STRIDE 0x00020 96#define MPIC_IRQ_VECTOR_PRI 0x00000 97#define MPIC_VECPRI_MASK 0x80000000 98#define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */ 99#define MPIC_VECPRI_PRIORITY_MASK 0x000f0000 100#define MPIC_VECPRI_PRIORITY_SHIFT 16 101#define MPIC_VECPRI_VECTOR_MASK 0x000007ff 102#define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000 103#define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000 104#define MPIC_VECPRI_POLARITY_MASK 0x00800000 105#define MPIC_VECPRI_SENSE_LEVEL 0x00400000 106#define MPIC_VECPRI_SENSE_EDGE 0x00000000 107#define MPIC_VECPRI_SENSE_MASK 0x00400000 108#define MPIC_IRQ_DESTINATION 0x00010 109 110#define MPIC_FSL_BRR1 0x00000 111#define MPIC_FSL_BRR1_VER 0x0000ffff 112 113#define MPIC_MAX_IRQ_SOURCES 2048 114#define MPIC_MAX_CPUS 32 115#define MPIC_MAX_ISU 32 116 117#define MPIC_MAX_ERR 32 118#define MPIC_FSL_ERR_INT 16 119 120/* 121 * Tsi108 implementation of MPIC has many differences from the original one 122 */ 123 124/* 125 * Global registers 126 */ 127 128#define TSI108_GREG_BASE 0x00000 129#define TSI108_GREG_FEATURE_0 0x00000 130#define TSI108_GREG_GLOBAL_CONF_0 0x00004 131#define TSI108_GREG_VENDOR_ID 0x0000c 132#define TSI108_GREG_IPI_VECTOR_PRI_0 0x00204 /* Doorbell 0 */ 133#define TSI108_GREG_IPI_STRIDE 0x0c 134#define TSI108_GREG_SPURIOUS 0x00010 135#define TSI108_GREG_TIMER_FREQ 0x00014 136 137/* 138 * Timer registers 139 */ 140#define TSI108_TIMER_BASE 0x0030 141#define TSI108_TIMER_STRIDE 0x10 142#define TSI108_TIMER_CURRENT_CNT 0x00000 143#define TSI108_TIMER_BASE_CNT 0x00004 144#define TSI108_TIMER_VECTOR_PRI 0x00008 145#define TSI108_TIMER_DESTINATION 0x0000c 146 147/* 148 * Per-Processor registers 149 */ 150#define TSI108_CPU_BASE 0x00300 151#define TSI108_CPU_STRIDE 0x00040 152#define TSI108_CPU_IPI_DISPATCH_0 0x00200 153#define TSI108_CPU_IPI_DISPATCH_STRIDE 0x00000 154#define TSI108_CPU_CURRENT_TASK_PRI 0x00000 155#define TSI108_CPU_WHOAMI 0xffffffff 156#define TSI108_CPU_INTACK 0x00004 157#define TSI108_CPU_EOI 0x00008 158#define TSI108_CPU_MCACK 0x00004 /* Doesn't really exist here */ 159 160/* 161 * Per-source registers 162 */ 163#define TSI108_IRQ_BASE 0x00100 164#define TSI108_IRQ_STRIDE 0x00008 165#define TSI108_IRQ_VECTOR_PRI 0x00000 166#define TSI108_VECPRI_VECTOR_MASK 0x000000ff 167#define TSI108_VECPRI_POLARITY_POSITIVE 0x01000000 168#define TSI108_VECPRI_POLARITY_NEGATIVE 0x00000000 169#define TSI108_VECPRI_SENSE_LEVEL 0x02000000 170#define TSI108_VECPRI_SENSE_EDGE 0x00000000 171#define TSI108_VECPRI_POLARITY_MASK 0x01000000 172#define TSI108_VECPRI_SENSE_MASK 0x02000000 173#define TSI108_IRQ_DESTINATION 0x00004 174 175/* weird mpic register indices and mask bits in the HW info array */ 176enum { 177 MPIC_IDX_GREG_BASE = 0, 178 MPIC_IDX_GREG_FEATURE_0, 179 MPIC_IDX_GREG_GLOBAL_CONF_0, 180 MPIC_IDX_GREG_VENDOR_ID, 181 MPIC_IDX_GREG_IPI_VECTOR_PRI_0, 182 MPIC_IDX_GREG_IPI_STRIDE, 183 MPIC_IDX_GREG_SPURIOUS, 184 MPIC_IDX_GREG_TIMER_FREQ, 185 186 MPIC_IDX_TIMER_BASE, 187 MPIC_IDX_TIMER_STRIDE, 188 MPIC_IDX_TIMER_CURRENT_CNT, 189 MPIC_IDX_TIMER_BASE_CNT, 190 MPIC_IDX_TIMER_VECTOR_PRI, 191 MPIC_IDX_TIMER_DESTINATION, 192 193 MPIC_IDX_CPU_BASE, 194 MPIC_IDX_CPU_STRIDE, 195 MPIC_IDX_CPU_IPI_DISPATCH_0, 196 MPIC_IDX_CPU_IPI_DISPATCH_STRIDE, 197 MPIC_IDX_CPU_CURRENT_TASK_PRI, 198 MPIC_IDX_CPU_WHOAMI, 199 MPIC_IDX_CPU_INTACK, 200 MPIC_IDX_CPU_EOI, 201 MPIC_IDX_CPU_MCACK, 202 203 MPIC_IDX_IRQ_BASE, 204 MPIC_IDX_IRQ_STRIDE, 205 MPIC_IDX_IRQ_VECTOR_PRI, 206 207 MPIC_IDX_VECPRI_VECTOR_MASK, 208 MPIC_IDX_VECPRI_POLARITY_POSITIVE, 209 MPIC_IDX_VECPRI_POLARITY_NEGATIVE, 210 MPIC_IDX_VECPRI_SENSE_LEVEL, 211 MPIC_IDX_VECPRI_SENSE_EDGE, 212 MPIC_IDX_VECPRI_POLARITY_MASK, 213 MPIC_IDX_VECPRI_SENSE_MASK, 214 MPIC_IDX_IRQ_DESTINATION, 215 MPIC_IDX_END 216}; 217 218 219#ifdef CONFIG_MPIC_U3_HT_IRQS 220/* Fixup table entry */ 221struct mpic_irq_fixup 222{ 223 u8 __iomem *base; 224 u8 __iomem *applebase; 225 u32 data; 226 unsigned int index; 227}; 228#endif /* CONFIG_MPIC_U3_HT_IRQS */ 229 230 231enum mpic_reg_type { 232 mpic_access_mmio_le, 233 mpic_access_mmio_be, 234#ifdef CONFIG_PPC_DCR 235 mpic_access_dcr 236#endif 237}; 238 239struct mpic_reg_bank { 240 u32 __iomem *base; 241#ifdef CONFIG_PPC_DCR 242 dcr_host_t dhost; 243#endif /* CONFIG_PPC_DCR */ 244}; 245 246struct mpic_irq_save { 247 u32 vecprio, 248 dest; 249#ifdef CONFIG_MPIC_U3_HT_IRQS 250 u32 fixup_data; 251#endif 252}; 253 254/* The instance data of a given MPIC */ 255struct mpic 256{ 257 /* The OpenFirmware dt node for this MPIC */ 258 struct device_node *node; 259 260 /* The remapper for this MPIC */ 261 struct irq_domain *irqhost; 262 263 /* The "linux" controller struct */ 264 struct irq_chip hc_irq; 265#ifdef CONFIG_MPIC_U3_HT_IRQS 266 struct irq_chip hc_ht_irq; 267#endif 268#ifdef CONFIG_SMP 269 struct irq_chip hc_ipi; 270#endif 271 struct irq_chip hc_tm; 272 struct irq_chip hc_err; 273 const char *name; 274 /* Flags */ 275 unsigned int flags; 276 /* How many irq sources in a given ISU */ 277 unsigned int isu_size; 278 unsigned int isu_shift; 279 unsigned int isu_mask; 280 /* Number of sources */ 281 unsigned int num_sources; 282 283 /* vector numbers used for internal sources (ipi/timers) */ 284 unsigned int ipi_vecs[4]; 285 unsigned int timer_vecs[8]; 286 /* vector numbers used for FSL MPIC error interrupts */ 287 unsigned int err_int_vecs[MPIC_MAX_ERR]; 288 289 /* Spurious vector to program into unused sources */ 290 unsigned int spurious_vec; 291 292#ifdef CONFIG_MPIC_U3_HT_IRQS 293 /* The fixup table */ 294 struct mpic_irq_fixup *fixups; 295 raw_spinlock_t fixup_lock; 296#endif 297 298 /* Register access method */ 299 enum mpic_reg_type reg_type; 300 301 /* The physical base address of the MPIC */ 302 phys_addr_t paddr; 303 304 /* The various ioremap'ed bases */ 305 struct mpic_reg_bank thiscpuregs; 306 struct mpic_reg_bank gregs; 307 struct mpic_reg_bank tmregs; 308 struct mpic_reg_bank cpuregs[MPIC_MAX_CPUS]; 309 struct mpic_reg_bank isus[MPIC_MAX_ISU]; 310 311 /* ioremap'ed base for error interrupt registers */ 312 u32 __iomem *err_regs; 313 314 /* Protected sources */ 315 unsigned long *protected; 316 317#ifdef CONFIG_MPIC_WEIRD 318 /* Pointer to HW info array */ 319 u32 *hw_set; 320#endif 321 322#ifdef CONFIG_PCI_MSI 323 struct msi_bitmap msi_bitmap; 324#endif 325 326#ifdef CONFIG_MPIC_BROKEN_REGREAD 327 u32 isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES]; 328#endif 329 330 /* link */ 331 struct mpic *next; 332 333#ifdef CONFIG_PM 334 struct mpic_irq_save *save_data; 335#endif 336}; 337 338extern struct bus_type mpic_subsys; 339 340/* 341 * MPIC flags (passed to mpic_alloc) 342 * 343 * The top 4 bits contain an MPIC bhw id that is used to index the 344 * register offsets and some masks when CONFIG_MPIC_WEIRD is set. 345 * Note setting any ID (leaving those bits to 0) means standard MPIC 346 */ 347 348/* 349 * This is a secondary ("chained") controller; it only uses the CPU0 350 * registers. Primary controllers have IPIs and affinity control. 351 */ 352#define MPIC_SECONDARY 0x00000001 353 354/* Set this for a big-endian MPIC */ 355#define MPIC_BIG_ENDIAN 0x00000002 356/* Broken U3 MPIC */ 357#define MPIC_U3_HT_IRQS 0x00000004 358/* Broken IPI registers (autodetected) */ 359#define MPIC_BROKEN_IPI 0x00000008 360/* Spurious vector requires EOI */ 361#define MPIC_SPV_EOI 0x00000020 362/* No passthrough disable */ 363#define MPIC_NO_PTHROU_DIS 0x00000040 364/* DCR based MPIC */ 365#define MPIC_USES_DCR 0x00000080 366/* MPIC has 11-bit vector fields (or larger) */ 367#define MPIC_LARGE_VECTORS 0x00000100 368/* Enable delivery of prio 15 interrupts as MCK instead of EE */ 369#define MPIC_ENABLE_MCK 0x00000200 370/* Disable bias among target selection, spread interrupts evenly */ 371#define MPIC_NO_BIAS 0x00000400 372/* Destination only supports a single CPU at a time */ 373#define MPIC_SINGLE_DEST_CPU 0x00001000 374/* Enable CoreInt delivery of interrupts */ 375#define MPIC_ENABLE_COREINT 0x00002000 376/* Do not reset the MPIC during initialization */ 377#define MPIC_NO_RESET 0x00004000 378/* Freescale MPIC (compatible includes "fsl,mpic") */ 379#define MPIC_FSL 0x00008000 380/* Freescale MPIC supports EIMR (error interrupt mask register). 381 * This flag is set for MPIC version >= 4.1 (version determined 382 * from the BRR1 register). 383*/ 384#define MPIC_FSL_HAS_EIMR 0x00010000 385 386/* MPIC HW modification ID */ 387#define MPIC_REGSET_MASK 0xf0000000 388#define MPIC_REGSET(val) (((val) & 0xf ) << 28) 389#define MPIC_GET_REGSET(flags) (((flags) >> 28) & 0xf) 390 391#define MPIC_REGSET_STANDARD MPIC_REGSET(0) /* Original MPIC */ 392#define MPIC_REGSET_TSI108 MPIC_REGSET(1) /* Tsi108/109 PIC */ 393 394/* Get the version of primary MPIC */ 395extern u32 fsl_mpic_primary_get_version(void); 396 397/* Allocate the controller structure and setup the linux irq descs 398 * for the range if interrupts passed in. No HW initialization is 399 * actually performed. 400 * 401 * @phys_addr: physial base address of the MPIC 402 * @flags: flags, see constants above 403 * @isu_size: number of interrupts in an ISU. Use 0 to use a 404 * standard ISU-less setup (aka powermac) 405 * @irq_offset: first irq number to assign to this mpic 406 * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0 407 * to match the number of sources 408 * @ipi_offset: first irq number to assign to this mpic IPI sources, 409 * used only on primary mpic 410 * @senses: array of sense values 411 * @senses_num: number of entries in the array 412 * 413 * Note about the sense array. If none is passed, all interrupts are 414 * setup to be level negative unless MPIC_U3_HT_IRQS is set in which 415 * case they are edge positive (and the array is ignored anyway). 416 * The values in the array start at the first source of the MPIC, 417 * that is senses[0] correspond to linux irq "irq_offset". 418 */ 419extern struct mpic *mpic_alloc(struct device_node *node, 420 phys_addr_t phys_addr, 421 unsigned int flags, 422 unsigned int isu_size, 423 unsigned int irq_count, 424 const char *name); 425 426/* Assign ISUs, to call before mpic_init() 427 * 428 * @mpic: controller structure as returned by mpic_alloc() 429 * @isu_num: ISU number 430 * @phys_addr: physical address of the ISU 431 */ 432extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, 433 phys_addr_t phys_addr); 434 435 436/* Initialize the controller. After this has been called, none of the above 437 * should be called again for this mpic 438 */ 439extern void mpic_init(struct mpic *mpic); 440 441/* 442 * All of the following functions must only be used after the 443 * ISUs have been assigned and the controller fully initialized 444 * with mpic_init() 445 */ 446 447 448/* Change the priority of an interrupt. Default is 8 for irqs and 449 * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the 450 * IPI number is then the offset'ed (linux irq number mapped to the IPI) 451 */ 452extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); 453 454/* Setup a non-boot CPU */ 455extern void mpic_setup_this_cpu(void); 456 457/* Clean up for kexec (or cpu offline or ...) */ 458extern void mpic_teardown_this_cpu(int secondary); 459 460/* Get the current cpu priority for this cpu (0..15) */ 461extern int mpic_cpu_get_priority(void); 462 463/* Set the current cpu priority for this cpu */ 464extern void mpic_cpu_set_priority(int prio); 465 466/* Request IPIs on primary mpic */ 467extern void mpic_request_ipis(void); 468 469/* Send a message (IPI) to a given target (cpu number or MSG_*) */ 470void smp_mpic_message_pass(int target, int msg); 471 472/* Unmask a specific virq */ 473extern void mpic_unmask_irq(struct irq_data *d); 474/* Mask a specific virq */ 475extern void mpic_mask_irq(struct irq_data *d); 476/* EOI a specific virq */ 477extern void mpic_end_irq(struct irq_data *d); 478 479/* Fetch interrupt from a given mpic */ 480extern unsigned int mpic_get_one_irq(struct mpic *mpic); 481/* This one gets from the primary mpic */ 482extern unsigned int mpic_get_irq(void); 483/* This one gets from the primary mpic via CoreInt*/ 484extern unsigned int mpic_get_coreint_irq(void); 485/* Fetch Machine Check interrupt from primary mpic */ 486extern unsigned int mpic_get_mcirq(void); 487 488#endif /* __KERNEL__ */ 489#endif /* _ASM_POWERPC_MPIC_H */ 490