1/* 2 * Derived from "arch/i386/kernel/process.c" 3 * Copyright (C) 1995 Linus Torvalds 4 * 5 * Updated and modified by Cort Dougan (cort@cs.nmt.edu) and 6 * Paul Mackerras (paulus@cs.anu.edu.au) 7 * 8 * PowerPC version 9 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License 13 * as published by the Free Software Foundation; either version 14 * 2 of the License, or (at your option) any later version. 15 */ 16 17#include <linux/errno.h> 18#include <linux/sched.h> 19#include <linux/kernel.h> 20#include <linux/mm.h> 21#include <linux/smp.h> 22#include <linux/stddef.h> 23#include <linux/unistd.h> 24#include <linux/ptrace.h> 25#include <linux/slab.h> 26#include <linux/user.h> 27#include <linux/elf.h> 28#include <linux/prctl.h> 29#include <linux/init_task.h> 30#include <linux/export.h> 31#include <linux/kallsyms.h> 32#include <linux/mqueue.h> 33#include <linux/hardirq.h> 34#include <linux/utsname.h> 35#include <linux/ftrace.h> 36#include <linux/kernel_stat.h> 37#include <linux/personality.h> 38#include <linux/random.h> 39#include <linux/hw_breakpoint.h> 40#include <linux/uaccess.h> 41 42#include <asm/pgtable.h> 43#include <asm/io.h> 44#include <asm/processor.h> 45#include <asm/mmu.h> 46#include <asm/prom.h> 47#include <asm/machdep.h> 48#include <asm/time.h> 49#include <asm/runlatch.h> 50#include <asm/syscalls.h> 51#include <asm/switch_to.h> 52#include <asm/tm.h> 53#include <asm/debug.h> 54#ifdef CONFIG_PPC64 55#include <asm/firmware.h> 56#endif 57#include <asm/code-patching.h> 58#include <linux/kprobes.h> 59#include <linux/kdebug.h> 60 61/* Transactional Memory debug */ 62#ifdef TM_DEBUG_SW 63#define TM_DEBUG(x...) printk(KERN_INFO x) 64#else 65#define TM_DEBUG(x...) do { } while(0) 66#endif 67 68extern unsigned long _get_SP(void); 69 70#ifndef CONFIG_SMP 71struct task_struct *last_task_used_math = NULL; 72struct task_struct *last_task_used_altivec = NULL; 73struct task_struct *last_task_used_vsx = NULL; 74struct task_struct *last_task_used_spe = NULL; 75#endif 76 77#ifdef CONFIG_PPC_TRANSACTIONAL_MEM 78void giveup_fpu_maybe_transactional(struct task_struct *tsk) 79{ 80 /* 81 * If we are saving the current thread's registers, and the 82 * thread is in a transactional state, set the TIF_RESTORE_TM 83 * bit so that we know to restore the registers before 84 * returning to userspace. 85 */ 86 if (tsk == current && tsk->thread.regs && 87 MSR_TM_ACTIVE(tsk->thread.regs->msr) && 88 !test_thread_flag(TIF_RESTORE_TM)) { 89 tsk->thread.tm_orig_msr = tsk->thread.regs->msr; 90 set_thread_flag(TIF_RESTORE_TM); 91 } 92 93 giveup_fpu(tsk); 94} 95 96void giveup_altivec_maybe_transactional(struct task_struct *tsk) 97{ 98 /* 99 * If we are saving the current thread's registers, and the 100 * thread is in a transactional state, set the TIF_RESTORE_TM 101 * bit so that we know to restore the registers before 102 * returning to userspace. 103 */ 104 if (tsk == current && tsk->thread.regs && 105 MSR_TM_ACTIVE(tsk->thread.regs->msr) && 106 !test_thread_flag(TIF_RESTORE_TM)) { 107 tsk->thread.tm_orig_msr = tsk->thread.regs->msr; 108 set_thread_flag(TIF_RESTORE_TM); 109 } 110 111 giveup_altivec(tsk); 112} 113 114#else 115#define giveup_fpu_maybe_transactional(tsk) giveup_fpu(tsk) 116#define giveup_altivec_maybe_transactional(tsk) giveup_altivec(tsk) 117#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ 118 119#ifdef CONFIG_PPC_FPU 120/* 121 * Make sure the floating-point register state in the 122 * the thread_struct is up to date for task tsk. 123 */ 124void flush_fp_to_thread(struct task_struct *tsk) 125{ 126 if (tsk->thread.regs) { 127 /* 128 * We need to disable preemption here because if we didn't, 129 * another process could get scheduled after the regs->msr 130 * test but before we have finished saving the FP registers 131 * to the thread_struct. That process could take over the 132 * FPU, and then when we get scheduled again we would store 133 * bogus values for the remaining FP registers. 134 */ 135 preempt_disable(); 136 if (tsk->thread.regs->msr & MSR_FP) { 137#ifdef CONFIG_SMP 138 /* 139 * This should only ever be called for current or 140 * for a stopped child process. Since we save away 141 * the FP register state on context switch on SMP, 142 * there is something wrong if a stopped child appears 143 * to still have its FP state in the CPU registers. 144 */ 145 BUG_ON(tsk != current); 146#endif 147 giveup_fpu_maybe_transactional(tsk); 148 } 149 preempt_enable(); 150 } 151} 152EXPORT_SYMBOL_GPL(flush_fp_to_thread); 153#endif /* CONFIG_PPC_FPU */ 154 155void enable_kernel_fp(void) 156{ 157 WARN_ON(preemptible()); 158 159#ifdef CONFIG_SMP 160 if (current->thread.regs && (current->thread.regs->msr & MSR_FP)) 161 giveup_fpu_maybe_transactional(current); 162 else 163 giveup_fpu(NULL); /* just enables FP for kernel */ 164#else 165 giveup_fpu_maybe_transactional(last_task_used_math); 166#endif /* CONFIG_SMP */ 167} 168EXPORT_SYMBOL(enable_kernel_fp); 169 170#ifdef CONFIG_ALTIVEC 171void enable_kernel_altivec(void) 172{ 173 WARN_ON(preemptible()); 174 175#ifdef CONFIG_SMP 176 if (current->thread.regs && (current->thread.regs->msr & MSR_VEC)) 177 giveup_altivec_maybe_transactional(current); 178 else 179 giveup_altivec_notask(); 180#else 181 giveup_altivec_maybe_transactional(last_task_used_altivec); 182#endif /* CONFIG_SMP */ 183} 184EXPORT_SYMBOL(enable_kernel_altivec); 185 186/* 187 * Make sure the VMX/Altivec register state in the 188 * the thread_struct is up to date for task tsk. 189 */ 190void flush_altivec_to_thread(struct task_struct *tsk) 191{ 192 if (tsk->thread.regs) { 193 preempt_disable(); 194 if (tsk->thread.regs->msr & MSR_VEC) { 195#ifdef CONFIG_SMP 196 BUG_ON(tsk != current); 197#endif 198 giveup_altivec_maybe_transactional(tsk); 199 } 200 preempt_enable(); 201 } 202} 203EXPORT_SYMBOL_GPL(flush_altivec_to_thread); 204#endif /* CONFIG_ALTIVEC */ 205 206#ifdef CONFIG_VSX 207void enable_kernel_vsx(void) 208{ 209 WARN_ON(preemptible()); 210 211#ifdef CONFIG_SMP 212 if (current->thread.regs && (current->thread.regs->msr & MSR_VSX)) 213 giveup_vsx(current); 214 else 215 giveup_vsx(NULL); /* just enable vsx for kernel - force */ 216#else 217 giveup_vsx(last_task_used_vsx); 218#endif /* CONFIG_SMP */ 219} 220EXPORT_SYMBOL(enable_kernel_vsx); 221 222void giveup_vsx(struct task_struct *tsk) 223{ 224 giveup_fpu_maybe_transactional(tsk); 225 giveup_altivec_maybe_transactional(tsk); 226 __giveup_vsx(tsk); 227} 228EXPORT_SYMBOL(giveup_vsx); 229 230void flush_vsx_to_thread(struct task_struct *tsk) 231{ 232 if (tsk->thread.regs) { 233 preempt_disable(); 234 if (tsk->thread.regs->msr & MSR_VSX) { 235#ifdef CONFIG_SMP 236 BUG_ON(tsk != current); 237#endif 238 giveup_vsx(tsk); 239 } 240 preempt_enable(); 241 } 242} 243EXPORT_SYMBOL_GPL(flush_vsx_to_thread); 244#endif /* CONFIG_VSX */ 245 246#ifdef CONFIG_SPE 247 248void enable_kernel_spe(void) 249{ 250 WARN_ON(preemptible()); 251 252#ifdef CONFIG_SMP 253 if (current->thread.regs && (current->thread.regs->msr & MSR_SPE)) 254 giveup_spe(current); 255 else 256 giveup_spe(NULL); /* just enable SPE for kernel - force */ 257#else 258 giveup_spe(last_task_used_spe); 259#endif /* __SMP __ */ 260} 261EXPORT_SYMBOL(enable_kernel_spe); 262 263void flush_spe_to_thread(struct task_struct *tsk) 264{ 265 if (tsk->thread.regs) { 266 preempt_disable(); 267 if (tsk->thread.regs->msr & MSR_SPE) { 268#ifdef CONFIG_SMP 269 BUG_ON(tsk != current); 270#endif 271 tsk->thread.spefscr = mfspr(SPRN_SPEFSCR); 272 giveup_spe(tsk); 273 } 274 preempt_enable(); 275 } 276} 277#endif /* CONFIG_SPE */ 278 279#ifndef CONFIG_SMP 280/* 281 * If we are doing lazy switching of CPU state (FP, altivec or SPE), 282 * and the current task has some state, discard it. 283 */ 284void discard_lazy_cpu_state(void) 285{ 286 preempt_disable(); 287 if (last_task_used_math == current) 288 last_task_used_math = NULL; 289#ifdef CONFIG_ALTIVEC 290 if (last_task_used_altivec == current) 291 last_task_used_altivec = NULL; 292#endif /* CONFIG_ALTIVEC */ 293#ifdef CONFIG_VSX 294 if (last_task_used_vsx == current) 295 last_task_used_vsx = NULL; 296#endif /* CONFIG_VSX */ 297#ifdef CONFIG_SPE 298 if (last_task_used_spe == current) 299 last_task_used_spe = NULL; 300#endif 301 preempt_enable(); 302} 303#endif /* CONFIG_SMP */ 304 305#ifdef CONFIG_PPC_ADV_DEBUG_REGS 306void do_send_trap(struct pt_regs *regs, unsigned long address, 307 unsigned long error_code, int signal_code, int breakpt) 308{ 309 siginfo_t info; 310 311 current->thread.trap_nr = signal_code; 312 if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code, 313 11, SIGSEGV) == NOTIFY_STOP) 314 return; 315 316 /* Deliver the signal to userspace */ 317 info.si_signo = SIGTRAP; 318 info.si_errno = breakpt; /* breakpoint or watchpoint id */ 319 info.si_code = signal_code; 320 info.si_addr = (void __user *)address; 321 force_sig_info(SIGTRAP, &info, current); 322} 323#else /* !CONFIG_PPC_ADV_DEBUG_REGS */ 324void do_break (struct pt_regs *regs, unsigned long address, 325 unsigned long error_code) 326{ 327 siginfo_t info; 328 329 current->thread.trap_nr = TRAP_HWBKPT; 330 if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code, 331 11, SIGSEGV) == NOTIFY_STOP) 332 return; 333 334 if (debugger_break_match(regs)) 335 return; 336 337 /* Clear the breakpoint */ 338 hw_breakpoint_disable(); 339 340 /* Deliver the signal to userspace */ 341 info.si_signo = SIGTRAP; 342 info.si_errno = 0; 343 info.si_code = TRAP_HWBKPT; 344 info.si_addr = (void __user *)address; 345 force_sig_info(SIGTRAP, &info, current); 346} 347#endif /* CONFIG_PPC_ADV_DEBUG_REGS */ 348 349static DEFINE_PER_CPU(struct arch_hw_breakpoint, current_brk); 350 351#ifdef CONFIG_PPC_ADV_DEBUG_REGS 352/* 353 * Set the debug registers back to their default "safe" values. 354 */ 355static void set_debug_reg_defaults(struct thread_struct *thread) 356{ 357 thread->debug.iac1 = thread->debug.iac2 = 0; 358#if CONFIG_PPC_ADV_DEBUG_IACS > 2 359 thread->debug.iac3 = thread->debug.iac4 = 0; 360#endif 361 thread->debug.dac1 = thread->debug.dac2 = 0; 362#if CONFIG_PPC_ADV_DEBUG_DVCS > 0 363 thread->debug.dvc1 = thread->debug.dvc2 = 0; 364#endif 365 thread->debug.dbcr0 = 0; 366#ifdef CONFIG_BOOKE 367 /* 368 * Force User/Supervisor bits to b11 (user-only MSR[PR]=1) 369 */ 370 thread->debug.dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | 371 DBCR1_IAC3US | DBCR1_IAC4US; 372 /* 373 * Force Data Address Compare User/Supervisor bits to be User-only 374 * (0b11 MSR[PR]=1) and set all other bits in DBCR2 register to be 0. 375 */ 376 thread->debug.dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US; 377#else 378 thread->debug.dbcr1 = 0; 379#endif 380} 381 382static void prime_debug_regs(struct debug_reg *debug) 383{ 384 /* 385 * We could have inherited MSR_DE from userspace, since 386 * it doesn't get cleared on exception entry. Make sure 387 * MSR_DE is clear before we enable any debug events. 388 */ 389 mtmsr(mfmsr() & ~MSR_DE); 390 391 mtspr(SPRN_IAC1, debug->iac1); 392 mtspr(SPRN_IAC2, debug->iac2); 393#if CONFIG_PPC_ADV_DEBUG_IACS > 2 394 mtspr(SPRN_IAC3, debug->iac3); 395 mtspr(SPRN_IAC4, debug->iac4); 396#endif 397 mtspr(SPRN_DAC1, debug->dac1); 398 mtspr(SPRN_DAC2, debug->dac2); 399#if CONFIG_PPC_ADV_DEBUG_DVCS > 0 400 mtspr(SPRN_DVC1, debug->dvc1); 401 mtspr(SPRN_DVC2, debug->dvc2); 402#endif 403 mtspr(SPRN_DBCR0, debug->dbcr0); 404 mtspr(SPRN_DBCR1, debug->dbcr1); 405#ifdef CONFIG_BOOKE 406 mtspr(SPRN_DBCR2, debug->dbcr2); 407#endif 408} 409/* 410 * Unless neither the old or new thread are making use of the 411 * debug registers, set the debug registers from the values 412 * stored in the new thread. 413 */ 414void switch_booke_debug_regs(struct debug_reg *new_debug) 415{ 416 if ((current->thread.debug.dbcr0 & DBCR0_IDM) 417 || (new_debug->dbcr0 & DBCR0_IDM)) 418 prime_debug_regs(new_debug); 419} 420EXPORT_SYMBOL_GPL(switch_booke_debug_regs); 421#else /* !CONFIG_PPC_ADV_DEBUG_REGS */ 422#ifndef CONFIG_HAVE_HW_BREAKPOINT 423static void set_debug_reg_defaults(struct thread_struct *thread) 424{ 425 thread->hw_brk.address = 0; 426 thread->hw_brk.type = 0; 427 set_breakpoint(&thread->hw_brk); 428} 429#endif /* !CONFIG_HAVE_HW_BREAKPOINT */ 430#endif /* CONFIG_PPC_ADV_DEBUG_REGS */ 431 432#ifdef CONFIG_PPC_ADV_DEBUG_REGS 433static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) 434{ 435 mtspr(SPRN_DAC1, dabr); 436#ifdef CONFIG_PPC_47x 437 isync(); 438#endif 439 return 0; 440} 441#elif defined(CONFIG_PPC_BOOK3S) 442static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) 443{ 444 mtspr(SPRN_DABR, dabr); 445 if (cpu_has_feature(CPU_FTR_DABRX)) 446 mtspr(SPRN_DABRX, dabrx); 447 return 0; 448} 449#else 450static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) 451{ 452 return -EINVAL; 453} 454#endif 455 456static inline int set_dabr(struct arch_hw_breakpoint *brk) 457{ 458 unsigned long dabr, dabrx; 459 460 dabr = brk->address | (brk->type & HW_BRK_TYPE_DABR); 461 dabrx = ((brk->type >> 3) & 0x7); 462 463 if (ppc_md.set_dabr) 464 return ppc_md.set_dabr(dabr, dabrx); 465 466 return __set_dabr(dabr, dabrx); 467} 468 469static inline int set_dawr(struct arch_hw_breakpoint *brk) 470{ 471 unsigned long dawr, dawrx, mrd; 472 473 dawr = brk->address; 474 475 dawrx = (brk->type & (HW_BRK_TYPE_READ | HW_BRK_TYPE_WRITE)) \ 476 << (63 - 58); //* read/write bits */ 477 dawrx |= ((brk->type & (HW_BRK_TYPE_TRANSLATE)) >> 2) \ 478 << (63 - 59); //* translate */ 479 dawrx |= (brk->type & (HW_BRK_TYPE_PRIV_ALL)) \ 480 >> 3; //* PRIM bits */ 481 /* dawr length is stored in field MDR bits 48:53. Matches range in 482 doublewords (64 bits) baised by -1 eg. 0b000000=1DW and 483 0b111111=64DW. 484 brk->len is in bytes. 485 This aligns up to double word size, shifts and does the bias. 486 */ 487 mrd = ((brk->len + 7) >> 3) - 1; 488 dawrx |= (mrd & 0x3f) << (63 - 53); 489 490 if (ppc_md.set_dawr) 491 return ppc_md.set_dawr(dawr, dawrx); 492 mtspr(SPRN_DAWR, dawr); 493 mtspr(SPRN_DAWRX, dawrx); 494 return 0; 495} 496 497void __set_breakpoint(struct arch_hw_breakpoint *brk) 498{ 499 memcpy(this_cpu_ptr(¤t_brk), brk, sizeof(*brk)); 500 501 if (cpu_has_feature(CPU_FTR_DAWR)) 502 set_dawr(brk); 503 else 504 set_dabr(brk); 505} 506 507void set_breakpoint(struct arch_hw_breakpoint *brk) 508{ 509 preempt_disable(); 510 __set_breakpoint(brk); 511 preempt_enable(); 512} 513 514#ifdef CONFIG_PPC64 515DEFINE_PER_CPU(struct cpu_usage, cpu_usage_array); 516#endif 517 518static inline bool hw_brk_match(struct arch_hw_breakpoint *a, 519 struct arch_hw_breakpoint *b) 520{ 521 if (a->address != b->address) 522 return false; 523 if (a->type != b->type) 524 return false; 525 if (a->len != b->len) 526 return false; 527 return true; 528} 529 530#ifdef CONFIG_PPC_TRANSACTIONAL_MEM 531static void tm_reclaim_thread(struct thread_struct *thr, 532 struct thread_info *ti, uint8_t cause) 533{ 534 unsigned long msr_diff = 0; 535 536 /* 537 * If FP/VSX registers have been already saved to the 538 * thread_struct, move them to the transact_fp array. 539 * We clear the TIF_RESTORE_TM bit since after the reclaim 540 * the thread will no longer be transactional. 541 */ 542 if (test_ti_thread_flag(ti, TIF_RESTORE_TM)) { 543 msr_diff = thr->tm_orig_msr & ~thr->regs->msr; 544 if (msr_diff & MSR_FP) 545 memcpy(&thr->transact_fp, &thr->fp_state, 546 sizeof(struct thread_fp_state)); 547 if (msr_diff & MSR_VEC) 548 memcpy(&thr->transact_vr, &thr->vr_state, 549 sizeof(struct thread_vr_state)); 550 clear_ti_thread_flag(ti, TIF_RESTORE_TM); 551 msr_diff &= MSR_FP | MSR_VEC | MSR_VSX | MSR_FE0 | MSR_FE1; 552 } 553 554 /* 555 * Use the current MSR TM suspended bit to track if we have 556 * checkpointed state outstanding. 557 * On signal delivery, we'd normally reclaim the checkpointed 558 * state to obtain stack pointer (see:get_tm_stackpointer()). 559 * This will then directly return to userspace without going 560 * through __switch_to(). However, if the stack frame is bad, 561 * we need to exit this thread which calls __switch_to() which 562 * will again attempt to reclaim the already saved tm state. 563 * Hence we need to check that we've not already reclaimed 564 * this state. 565 * We do this using the current MSR, rather tracking it in 566 * some specific thread_struct bit, as it has the additional 567 * benifit of checking for a potential TM bad thing exception. 568 */ 569 if (!MSR_TM_SUSPENDED(mfmsr())) 570 return; 571 572 tm_reclaim(thr, thr->regs->msr, cause); 573 574 /* Having done the reclaim, we now have the checkpointed 575 * FP/VSX values in the registers. These might be valid 576 * even if we have previously called enable_kernel_fp() or 577 * flush_fp_to_thread(), so update thr->regs->msr to 578 * indicate their current validity. 579 */ 580 thr->regs->msr |= msr_diff; 581} 582 583void tm_reclaim_current(uint8_t cause) 584{ 585 tm_enable(); 586 tm_reclaim_thread(¤t->thread, current_thread_info(), cause); 587} 588 589static inline void tm_reclaim_task(struct task_struct *tsk) 590{ 591 /* We have to work out if we're switching from/to a task that's in the 592 * middle of a transaction. 593 * 594 * In switching we need to maintain a 2nd register state as 595 * oldtask->thread.ckpt_regs. We tm_reclaim(oldproc); this saves the 596 * checkpointed (tbegin) state in ckpt_regs and saves the transactional 597 * (current) FPRs into oldtask->thread.transact_fpr[]. 598 * 599 * We also context switch (save) TFHAR/TEXASR/TFIAR in here. 600 */ 601 struct thread_struct *thr = &tsk->thread; 602 603 if (!thr->regs) 604 return; 605 606 if (!MSR_TM_ACTIVE(thr->regs->msr)) 607 goto out_and_saveregs; 608 609 /* Stash the original thread MSR, as giveup_fpu et al will 610 * modify it. We hold onto it to see whether the task used 611 * FP & vector regs. If the TIF_RESTORE_TM flag is set, 612 * tm_orig_msr is already set. 613 */ 614 if (!test_ti_thread_flag(task_thread_info(tsk), TIF_RESTORE_TM)) 615 thr->tm_orig_msr = thr->regs->msr; 616 617 TM_DEBUG("--- tm_reclaim on pid %d (NIP=%lx, " 618 "ccr=%lx, msr=%lx, trap=%lx)\n", 619 tsk->pid, thr->regs->nip, 620 thr->regs->ccr, thr->regs->msr, 621 thr->regs->trap); 622 623 tm_reclaim_thread(thr, task_thread_info(tsk), TM_CAUSE_RESCHED); 624 625 TM_DEBUG("--- tm_reclaim on pid %d complete\n", 626 tsk->pid); 627 628out_and_saveregs: 629 /* Always save the regs here, even if a transaction's not active. 630 * This context-switches a thread's TM info SPRs. We do it here to 631 * be consistent with the restore path (in recheckpoint) which 632 * cannot happen later in _switch(). 633 */ 634 tm_save_sprs(thr); 635} 636 637extern void __tm_recheckpoint(struct thread_struct *thread, 638 unsigned long orig_msr); 639 640void tm_recheckpoint(struct thread_struct *thread, 641 unsigned long orig_msr) 642{ 643 unsigned long flags; 644 645 /* We really can't be interrupted here as the TEXASR registers can't 646 * change and later in the trecheckpoint code, we have a userspace R1. 647 * So let's hard disable over this region. 648 */ 649 local_irq_save(flags); 650 hard_irq_disable(); 651 652 /* The TM SPRs are restored here, so that TEXASR.FS can be set 653 * before the trecheckpoint and no explosion occurs. 654 */ 655 tm_restore_sprs(thread); 656 657 __tm_recheckpoint(thread, orig_msr); 658 659 local_irq_restore(flags); 660} 661 662static inline void tm_recheckpoint_new_task(struct task_struct *new) 663{ 664 unsigned long msr; 665 666 if (!cpu_has_feature(CPU_FTR_TM)) 667 return; 668 669 /* Recheckpoint the registers of the thread we're about to switch to. 670 * 671 * If the task was using FP, we non-lazily reload both the original and 672 * the speculative FP register states. This is because the kernel 673 * doesn't see if/when a TM rollback occurs, so if we take an FP 674 * unavoidable later, we are unable to determine which set of FP regs 675 * need to be restored. 676 */ 677 if (!new->thread.regs) 678 return; 679 680 if (!MSR_TM_ACTIVE(new->thread.regs->msr)){ 681 tm_restore_sprs(&new->thread); 682 return; 683 } 684 msr = new->thread.tm_orig_msr; 685 /* Recheckpoint to restore original checkpointed register state. */ 686 TM_DEBUG("*** tm_recheckpoint of pid %d " 687 "(new->msr 0x%lx, new->origmsr 0x%lx)\n", 688 new->pid, new->thread.regs->msr, msr); 689 690 /* This loads the checkpointed FP/VEC state, if used */ 691 tm_recheckpoint(&new->thread, msr); 692 693 /* This loads the speculative FP/VEC state, if used */ 694 if (msr & MSR_FP) { 695 do_load_up_transact_fpu(&new->thread); 696 new->thread.regs->msr |= 697 (MSR_FP | new->thread.fpexc_mode); 698 } 699#ifdef CONFIG_ALTIVEC 700 if (msr & MSR_VEC) { 701 do_load_up_transact_altivec(&new->thread); 702 new->thread.regs->msr |= MSR_VEC; 703 } 704#endif 705 /* We may as well turn on VSX too since all the state is restored now */ 706 if (msr & MSR_VSX) 707 new->thread.regs->msr |= MSR_VSX; 708 709 TM_DEBUG("*** tm_recheckpoint of pid %d complete " 710 "(kernel msr 0x%lx)\n", 711 new->pid, mfmsr()); 712} 713 714static inline void __switch_to_tm(struct task_struct *prev) 715{ 716 if (cpu_has_feature(CPU_FTR_TM)) { 717 tm_enable(); 718 tm_reclaim_task(prev); 719 } 720} 721 722/* 723 * This is called if we are on the way out to userspace and the 724 * TIF_RESTORE_TM flag is set. It checks if we need to reload 725 * FP and/or vector state and does so if necessary. 726 * If userspace is inside a transaction (whether active or 727 * suspended) and FP/VMX/VSX instructions have ever been enabled 728 * inside that transaction, then we have to keep them enabled 729 * and keep the FP/VMX/VSX state loaded while ever the transaction 730 * continues. The reason is that if we didn't, and subsequently 731 * got a FP/VMX/VSX unavailable interrupt inside a transaction, 732 * we don't know whether it's the same transaction, and thus we 733 * don't know which of the checkpointed state and the transactional 734 * state to use. 735 */ 736void restore_tm_state(struct pt_regs *regs) 737{ 738 unsigned long msr_diff; 739 740 clear_thread_flag(TIF_RESTORE_TM); 741 if (!MSR_TM_ACTIVE(regs->msr)) 742 return; 743 744 msr_diff = current->thread.tm_orig_msr & ~regs->msr; 745 msr_diff &= MSR_FP | MSR_VEC | MSR_VSX; 746 if (msr_diff & MSR_FP) { 747 fp_enable(); 748 load_fp_state(¤t->thread.fp_state); 749 regs->msr |= current->thread.fpexc_mode; 750 } 751 if (msr_diff & MSR_VEC) { 752 vec_enable(); 753 load_vr_state(¤t->thread.vr_state); 754 } 755 regs->msr |= msr_diff; 756} 757 758#else 759#define tm_recheckpoint_new_task(new) 760#define __switch_to_tm(prev) 761#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ 762 763struct task_struct *__switch_to(struct task_struct *prev, 764 struct task_struct *new) 765{ 766 struct thread_struct *new_thread, *old_thread; 767 struct task_struct *last; 768#ifdef CONFIG_PPC_BOOK3S_64 769 struct ppc64_tlb_batch *batch; 770#endif 771 772 WARN_ON(!irqs_disabled()); 773 774 /* Back up the TAR and DSCR across context switches. 775 * Note that the TAR is not available for use in the kernel. (To 776 * provide this, the TAR should be backed up/restored on exception 777 * entry/exit instead, and be in pt_regs. FIXME, this should be in 778 * pt_regs anyway (for debug).) 779 * Save the TAR and DSCR here before we do treclaim/trecheckpoint as 780 * these will change them. 781 */ 782 save_early_sprs(&prev->thread); 783 784 __switch_to_tm(prev); 785 786#ifdef CONFIG_SMP 787 /* avoid complexity of lazy save/restore of fpu 788 * by just saving it every time we switch out if 789 * this task used the fpu during the last quantum. 790 * 791 * If it tries to use the fpu again, it'll trap and 792 * reload its fp regs. So we don't have to do a restore 793 * every switch, just a save. 794 * -- Cort 795 */ 796 if (prev->thread.regs && (prev->thread.regs->msr & MSR_FP)) 797 giveup_fpu(prev); 798#ifdef CONFIG_ALTIVEC 799 /* 800 * If the previous thread used altivec in the last quantum 801 * (thus changing altivec regs) then save them. 802 * We used to check the VRSAVE register but not all apps 803 * set it, so we don't rely on it now (and in fact we need 804 * to save & restore VSCR even if VRSAVE == 0). -- paulus 805 * 806 * On SMP we always save/restore altivec regs just to avoid the 807 * complexity of changing processors. 808 * -- Cort 809 */ 810 if (prev->thread.regs && (prev->thread.regs->msr & MSR_VEC)) 811 giveup_altivec(prev); 812#endif /* CONFIG_ALTIVEC */ 813#ifdef CONFIG_VSX 814 if (prev->thread.regs && (prev->thread.regs->msr & MSR_VSX)) 815 /* VMX and FPU registers are already save here */ 816 __giveup_vsx(prev); 817#endif /* CONFIG_VSX */ 818#ifdef CONFIG_SPE 819 /* 820 * If the previous thread used spe in the last quantum 821 * (thus changing spe regs) then save them. 822 * 823 * On SMP we always save/restore spe regs just to avoid the 824 * complexity of changing processors. 825 */ 826 if ((prev->thread.regs && (prev->thread.regs->msr & MSR_SPE))) 827 giveup_spe(prev); 828#endif /* CONFIG_SPE */ 829 830#else /* CONFIG_SMP */ 831#ifdef CONFIG_ALTIVEC 832 /* Avoid the trap. On smp this this never happens since 833 * we don't set last_task_used_altivec -- Cort 834 */ 835 if (new->thread.regs && last_task_used_altivec == new) 836 new->thread.regs->msr |= MSR_VEC; 837#endif /* CONFIG_ALTIVEC */ 838#ifdef CONFIG_VSX 839 if (new->thread.regs && last_task_used_vsx == new) 840 new->thread.regs->msr |= MSR_VSX; 841#endif /* CONFIG_VSX */ 842#ifdef CONFIG_SPE 843 /* Avoid the trap. On smp this this never happens since 844 * we don't set last_task_used_spe 845 */ 846 if (new->thread.regs && last_task_used_spe == new) 847 new->thread.regs->msr |= MSR_SPE; 848#endif /* CONFIG_SPE */ 849 850#endif /* CONFIG_SMP */ 851 852#ifdef CONFIG_PPC_ADV_DEBUG_REGS 853 switch_booke_debug_regs(&new->thread.debug); 854#else 855/* 856 * For PPC_BOOK3S_64, we use the hw-breakpoint interfaces that would 857 * schedule DABR 858 */ 859#ifndef CONFIG_HAVE_HW_BREAKPOINT 860 if (unlikely(!hw_brk_match(this_cpu_ptr(¤t_brk), &new->thread.hw_brk))) 861 __set_breakpoint(&new->thread.hw_brk); 862#endif /* CONFIG_HAVE_HW_BREAKPOINT */ 863#endif 864 865 866 new_thread = &new->thread; 867 old_thread = ¤t->thread; 868 869#ifdef CONFIG_PPC64 870 /* 871 * Collect processor utilization data per process 872 */ 873 if (firmware_has_feature(FW_FEATURE_SPLPAR)) { 874 struct cpu_usage *cu = this_cpu_ptr(&cpu_usage_array); 875 long unsigned start_tb, current_tb; 876 start_tb = old_thread->start_tb; 877 cu->current_tb = current_tb = mfspr(SPRN_PURR); 878 old_thread->accum_tb += (current_tb - start_tb); 879 new_thread->start_tb = current_tb; 880 } 881#endif /* CONFIG_PPC64 */ 882 883#ifdef CONFIG_PPC_BOOK3S_64 884 batch = this_cpu_ptr(&ppc64_tlb_batch); 885 if (batch->active) { 886 current_thread_info()->local_flags |= _TLF_LAZY_MMU; 887 if (batch->index) 888 __flush_tlb_pending(batch); 889 batch->active = 0; 890 } 891#endif /* CONFIG_PPC_BOOK3S_64 */ 892 893 /* 894 * We can't take a PMU exception inside _switch() since there is a 895 * window where the kernel stack SLB and the kernel stack are out 896 * of sync. Hard disable here. 897 */ 898 hard_irq_disable(); 899 900 tm_recheckpoint_new_task(new); 901 902 last = _switch(old_thread, new_thread); 903 904#ifdef CONFIG_PPC_BOOK3S_64 905 if (current_thread_info()->local_flags & _TLF_LAZY_MMU) { 906 current_thread_info()->local_flags &= ~_TLF_LAZY_MMU; 907 batch = this_cpu_ptr(&ppc64_tlb_batch); 908 batch->active = 1; 909 } 910#endif /* CONFIG_PPC_BOOK3S_64 */ 911 912 return last; 913} 914 915static int instructions_to_print = 16; 916 917static void show_instructions(struct pt_regs *regs) 918{ 919 int i; 920 unsigned long pc = regs->nip - (instructions_to_print * 3 / 4 * 921 sizeof(int)); 922 923 printk("Instruction dump:"); 924 925 for (i = 0; i < instructions_to_print; i++) { 926 int instr; 927 928 if (!(i % 8)) 929 printk("\n"); 930 931#if !defined(CONFIG_BOOKE) 932 /* If executing with the IMMU off, adjust pc rather 933 * than print XXXXXXXX. 934 */ 935 if (!(regs->msr & MSR_IR)) 936 pc = (unsigned long)phys_to_virt(pc); 937#endif 938 939 if (!__kernel_text_address(pc) || 940 probe_kernel_address((unsigned int __user *)pc, instr)) { 941 printk(KERN_CONT "XXXXXXXX "); 942 } else { 943 if (regs->nip == pc) 944 printk(KERN_CONT "<%08x> ", instr); 945 else 946 printk(KERN_CONT "%08x ", instr); 947 } 948 949 pc += sizeof(int); 950 } 951 952 printk("\n"); 953} 954 955static struct regbit { 956 unsigned long bit; 957 const char *name; 958} msr_bits[] = { 959#if defined(CONFIG_PPC64) && !defined(CONFIG_BOOKE) 960 {MSR_SF, "SF"}, 961 {MSR_HV, "HV"}, 962#endif 963 {MSR_VEC, "VEC"}, 964 {MSR_VSX, "VSX"}, 965#ifdef CONFIG_BOOKE 966 {MSR_CE, "CE"}, 967#endif 968 {MSR_EE, "EE"}, 969 {MSR_PR, "PR"}, 970 {MSR_FP, "FP"}, 971 {MSR_ME, "ME"}, 972#ifdef CONFIG_BOOKE 973 {MSR_DE, "DE"}, 974#else 975 {MSR_SE, "SE"}, 976 {MSR_BE, "BE"}, 977#endif 978 {MSR_IR, "IR"}, 979 {MSR_DR, "DR"}, 980 {MSR_PMM, "PMM"}, 981#ifndef CONFIG_BOOKE 982 {MSR_RI, "RI"}, 983 {MSR_LE, "LE"}, 984#endif 985 {0, NULL} 986}; 987 988static void printbits(unsigned long val, struct regbit *bits) 989{ 990 const char *sep = ""; 991 992 printk("<"); 993 for (; bits->bit; ++bits) 994 if (val & bits->bit) { 995 printk("%s%s", sep, bits->name); 996 sep = ","; 997 } 998 printk(">"); 999} 1000 1001#ifdef CONFIG_PPC64 1002#define REG "%016lx" 1003#define REGS_PER_LINE 4 1004#define LAST_VOLATILE 13 1005#else 1006#define REG "%08lx" 1007#define REGS_PER_LINE 8 1008#define LAST_VOLATILE 12 1009#endif 1010 1011void show_regs(struct pt_regs * regs) 1012{ 1013 int i, trap; 1014 1015 show_regs_print_info(KERN_DEFAULT); 1016 1017 printk("NIP: "REG" LR: "REG" CTR: "REG"\n", 1018 regs->nip, regs->link, regs->ctr); 1019 printk("REGS: %p TRAP: %04lx %s (%s)\n", 1020 regs, regs->trap, print_tainted(), init_utsname()->release); 1021 printk("MSR: "REG" ", regs->msr); 1022 printbits(regs->msr, msr_bits); 1023 printk(" CR: %08lx XER: %08lx\n", regs->ccr, regs->xer); 1024 trap = TRAP(regs); 1025 if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR)) 1026 printk("CFAR: "REG" ", regs->orig_gpr3); 1027 if (trap == 0x200 || trap == 0x300 || trap == 0x600) 1028#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) 1029 printk("DEAR: "REG" ESR: "REG" ", regs->dar, regs->dsisr); 1030#else 1031 printk("DAR: "REG" DSISR: %08lx ", regs->dar, regs->dsisr); 1032#endif 1033#ifdef CONFIG_PPC64 1034 printk("SOFTE: %ld ", regs->softe); 1035#endif 1036#ifdef CONFIG_PPC_TRANSACTIONAL_MEM 1037 if (MSR_TM_ACTIVE(regs->msr)) 1038 printk("\nPACATMSCRATCH: %016llx ", get_paca()->tm_scratch); 1039#endif 1040 1041 for (i = 0; i < 32; i++) { 1042 if ((i % REGS_PER_LINE) == 0) 1043 printk("\nGPR%02d: ", i); 1044 printk(REG " ", regs->gpr[i]); 1045 if (i == LAST_VOLATILE && !FULL_REGS(regs)) 1046 break; 1047 } 1048 printk("\n"); 1049#ifdef CONFIG_KALLSYMS 1050 /* 1051 * Lookup NIP late so we have the best change of getting the 1052 * above info out without failing 1053 */ 1054 printk("NIP ["REG"] %pS\n", regs->nip, (void *)regs->nip); 1055 printk("LR ["REG"] %pS\n", regs->link, (void *)regs->link); 1056#endif 1057 show_stack(current, (unsigned long *) regs->gpr[1]); 1058 if (!user_mode(regs)) 1059 show_instructions(regs); 1060} 1061 1062void exit_thread(void) 1063{ 1064 discard_lazy_cpu_state(); 1065} 1066 1067void flush_thread(void) 1068{ 1069 discard_lazy_cpu_state(); 1070 1071#ifdef CONFIG_HAVE_HW_BREAKPOINT 1072 flush_ptrace_hw_breakpoint(current); 1073#else /* CONFIG_HAVE_HW_BREAKPOINT */ 1074 set_debug_reg_defaults(¤t->thread); 1075#endif /* CONFIG_HAVE_HW_BREAKPOINT */ 1076} 1077 1078void 1079release_thread(struct task_struct *t) 1080{ 1081} 1082 1083/* 1084 * this gets called so that we can store coprocessor state into memory and 1085 * copy the current task into the new thread. 1086 */ 1087int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) 1088{ 1089 flush_fp_to_thread(src); 1090 flush_altivec_to_thread(src); 1091 flush_vsx_to_thread(src); 1092 flush_spe_to_thread(src); 1093 /* 1094 * Flush TM state out so we can copy it. __switch_to_tm() does this 1095 * flush but it removes the checkpointed state from the current CPU and 1096 * transitions the CPU out of TM mode. Hence we need to call 1097 * tm_recheckpoint_new_task() (on the same task) to restore the 1098 * checkpointed state back and the TM mode. 1099 */ 1100 __switch_to_tm(src); 1101 tm_recheckpoint_new_task(src); 1102 1103 *dst = *src; 1104 1105 clear_task_ebb(dst); 1106 1107 return 0; 1108} 1109 1110static void setup_ksp_vsid(struct task_struct *p, unsigned long sp) 1111{ 1112#ifdef CONFIG_PPC_STD_MMU_64 1113 unsigned long sp_vsid; 1114 unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp; 1115 1116 if (mmu_has_feature(MMU_FTR_1T_SEGMENT)) 1117 sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_1T) 1118 << SLB_VSID_SHIFT_1T; 1119 else 1120 sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_256M) 1121 << SLB_VSID_SHIFT; 1122 sp_vsid |= SLB_VSID_KERNEL | llp; 1123 p->thread.ksp_vsid = sp_vsid; 1124#endif 1125} 1126 1127/* 1128 * Copy a thread.. 1129 */ 1130extern unsigned long dscr_default; /* defined in arch/powerpc/kernel/sysfs.c */ 1131 1132/* 1133 * Copy architecture-specific thread state 1134 */ 1135int copy_thread(unsigned long clone_flags, unsigned long usp, 1136 unsigned long kthread_arg, struct task_struct *p) 1137{ 1138 struct pt_regs *childregs, *kregs; 1139 extern void ret_from_fork(void); 1140 extern void ret_from_kernel_thread(void); 1141 void (*f)(void); 1142 unsigned long sp = (unsigned long)task_stack_page(p) + THREAD_SIZE; 1143 1144 /* Copy registers */ 1145 sp -= sizeof(struct pt_regs); 1146 childregs = (struct pt_regs *) sp; 1147 if (unlikely(p->flags & PF_KTHREAD)) { 1148 /* kernel thread */ 1149 struct thread_info *ti = (void *)task_stack_page(p); 1150 memset(childregs, 0, sizeof(struct pt_regs)); 1151 childregs->gpr[1] = sp + sizeof(struct pt_regs); 1152 /* function */ 1153 if (usp) 1154 childregs->gpr[14] = ppc_function_entry((void *)usp); 1155#ifdef CONFIG_PPC64 1156 clear_tsk_thread_flag(p, TIF_32BIT); 1157 childregs->softe = 1; 1158#endif 1159 childregs->gpr[15] = kthread_arg; 1160 p->thread.regs = NULL; /* no user register state */ 1161 ti->flags |= _TIF_RESTOREALL; 1162 f = ret_from_kernel_thread; 1163 } else { 1164 /* user thread */ 1165 struct pt_regs *regs = current_pt_regs(); 1166 CHECK_FULL_REGS(regs); 1167 *childregs = *regs; 1168 if (usp) 1169 childregs->gpr[1] = usp; 1170 p->thread.regs = childregs; 1171 childregs->gpr[3] = 0; /* Result from fork() */ 1172 if (clone_flags & CLONE_SETTLS) { 1173#ifdef CONFIG_PPC64 1174 if (!is_32bit_task()) 1175 childregs->gpr[13] = childregs->gpr[6]; 1176 else 1177#endif 1178 childregs->gpr[2] = childregs->gpr[6]; 1179 } 1180 1181 f = ret_from_fork; 1182 } 1183 sp -= STACK_FRAME_OVERHEAD; 1184 1185 /* 1186 * The way this works is that at some point in the future 1187 * some task will call _switch to switch to the new task. 1188 * That will pop off the stack frame created below and start 1189 * the new task running at ret_from_fork. The new task will 1190 * do some house keeping and then return from the fork or clone 1191 * system call, using the stack frame created above. 1192 */ 1193 ((unsigned long *)sp)[0] = 0; 1194 sp -= sizeof(struct pt_regs); 1195 kregs = (struct pt_regs *) sp; 1196 sp -= STACK_FRAME_OVERHEAD; 1197 p->thread.ksp = sp; 1198#ifdef CONFIG_PPC32 1199 p->thread.ksp_limit = (unsigned long)task_stack_page(p) + 1200 _ALIGN_UP(sizeof(struct thread_info), 16); 1201#endif 1202#ifdef CONFIG_HAVE_HW_BREAKPOINT 1203 p->thread.ptrace_bps[0] = NULL; 1204#endif 1205 1206 p->thread.fp_save_area = NULL; 1207#ifdef CONFIG_ALTIVEC 1208 p->thread.vr_save_area = NULL; 1209#endif 1210 1211 setup_ksp_vsid(p, sp); 1212 1213#ifdef CONFIG_PPC64 1214 if (cpu_has_feature(CPU_FTR_DSCR)) { 1215 p->thread.dscr_inherit = current->thread.dscr_inherit; 1216 p->thread.dscr = current->thread.dscr; 1217 } 1218 if (cpu_has_feature(CPU_FTR_HAS_PPR)) 1219 p->thread.ppr = INIT_PPR; 1220#endif 1221 kregs->nip = ppc_function_entry(f); 1222 return 0; 1223} 1224 1225/* 1226 * Set up a thread for executing a new program 1227 */ 1228void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp) 1229{ 1230#ifdef CONFIG_PPC64 1231 unsigned long load_addr = regs->gpr[2]; /* saved by ELF_PLAT_INIT */ 1232#endif 1233 1234 /* 1235 * If we exec out of a kernel thread then thread.regs will not be 1236 * set. Do it now. 1237 */ 1238 if (!current->thread.regs) { 1239 struct pt_regs *regs = task_stack_page(current) + THREAD_SIZE; 1240 current->thread.regs = regs - 1; 1241 } 1242 1243 memset(regs->gpr, 0, sizeof(regs->gpr)); 1244 regs->ctr = 0; 1245 regs->link = 0; 1246 regs->xer = 0; 1247 regs->ccr = 0; 1248 regs->gpr[1] = sp; 1249 1250 /* 1251 * We have just cleared all the nonvolatile GPRs, so make 1252 * FULL_REGS(regs) return true. This is necessary to allow 1253 * ptrace to examine the thread immediately after exec. 1254 */ 1255 regs->trap &= ~1UL; 1256 1257#ifdef CONFIG_PPC32 1258 regs->mq = 0; 1259 regs->nip = start; 1260 regs->msr = MSR_USER; 1261#else 1262 if (!is_32bit_task()) { 1263 unsigned long entry; 1264 1265 if (is_elf2_task()) { 1266 /* Look ma, no function descriptors! */ 1267 entry = start; 1268 1269 /* 1270 * Ulrich says: 1271 * The latest iteration of the ABI requires that when 1272 * calling a function (at its global entry point), 1273 * the caller must ensure r12 holds the entry point 1274 * address (so that the function can quickly 1275 * establish addressability). 1276 */ 1277 regs->gpr[12] = start; 1278 /* Make sure that's restored on entry to userspace. */ 1279 set_thread_flag(TIF_RESTOREALL); 1280 } else { 1281 unsigned long toc; 1282 1283 /* start is a relocated pointer to the function 1284 * descriptor for the elf _start routine. The first 1285 * entry in the function descriptor is the entry 1286 * address of _start and the second entry is the TOC 1287 * value we need to use. 1288 */ 1289 __get_user(entry, (unsigned long __user *)start); 1290 __get_user(toc, (unsigned long __user *)start+1); 1291 1292 /* Check whether the e_entry function descriptor entries 1293 * need to be relocated before we can use them. 1294 */ 1295 if (load_addr != 0) { 1296 entry += load_addr; 1297 toc += load_addr; 1298 } 1299 regs->gpr[2] = toc; 1300 } 1301 regs->nip = entry; 1302 regs->msr = MSR_USER64; 1303 } else { 1304 regs->nip = start; 1305 regs->gpr[2] = 0; 1306 regs->msr = MSR_USER32; 1307 } 1308#endif 1309 discard_lazy_cpu_state(); 1310#ifdef CONFIG_VSX 1311 current->thread.used_vsr = 0; 1312#endif 1313 memset(¤t->thread.fp_state, 0, sizeof(current->thread.fp_state)); 1314 current->thread.fp_save_area = NULL; 1315#ifdef CONFIG_ALTIVEC 1316 memset(¤t->thread.vr_state, 0, sizeof(current->thread.vr_state)); 1317 current->thread.vr_state.vscr.u[3] = 0x00010000; /* Java mode disabled */ 1318 current->thread.vr_save_area = NULL; 1319 current->thread.vrsave = 0; 1320 current->thread.used_vr = 0; 1321#endif /* CONFIG_ALTIVEC */ 1322#ifdef CONFIG_SPE 1323 memset(current->thread.evr, 0, sizeof(current->thread.evr)); 1324 current->thread.acc = 0; 1325 current->thread.spefscr = 0; 1326 current->thread.used_spe = 0; 1327#endif /* CONFIG_SPE */ 1328#ifdef CONFIG_PPC_TRANSACTIONAL_MEM 1329 if (cpu_has_feature(CPU_FTR_TM)) 1330 regs->msr |= MSR_TM; 1331 current->thread.tm_tfhar = 0; 1332 current->thread.tm_texasr = 0; 1333 current->thread.tm_tfiar = 0; 1334#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ 1335} 1336EXPORT_SYMBOL(start_thread); 1337 1338#define PR_FP_ALL_EXCEPT (PR_FP_EXC_DIV | PR_FP_EXC_OVF | PR_FP_EXC_UND \ 1339 | PR_FP_EXC_RES | PR_FP_EXC_INV) 1340 1341int set_fpexc_mode(struct task_struct *tsk, unsigned int val) 1342{ 1343 struct pt_regs *regs = tsk->thread.regs; 1344 1345 /* This is a bit hairy. If we are an SPE enabled processor 1346 * (have embedded fp) we store the IEEE exception enable flags in 1347 * fpexc_mode. fpexc_mode is also used for setting FP exception 1348 * mode (asyn, precise, disabled) for 'Classic' FP. */ 1349 if (val & PR_FP_EXC_SW_ENABLE) { 1350#ifdef CONFIG_SPE 1351 if (cpu_has_feature(CPU_FTR_SPE)) { 1352 /* 1353 * When the sticky exception bits are set 1354 * directly by userspace, it must call prctl 1355 * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE 1356 * in the existing prctl settings) or 1357 * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in 1358 * the bits being set). <fenv.h> functions 1359 * saving and restoring the whole 1360 * floating-point environment need to do so 1361 * anyway to restore the prctl settings from 1362 * the saved environment. 1363 */ 1364 tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR); 1365 tsk->thread.fpexc_mode = val & 1366 (PR_FP_EXC_SW_ENABLE | PR_FP_ALL_EXCEPT); 1367 return 0; 1368 } else { 1369 return -EINVAL; 1370 } 1371#else 1372 return -EINVAL; 1373#endif 1374 } 1375 1376 /* on a CONFIG_SPE this does not hurt us. The bits that 1377 * __pack_fe01 use do not overlap with bits used for 1378 * PR_FP_EXC_SW_ENABLE. Additionally, the MSR[FE0,FE1] bits 1379 * on CONFIG_SPE implementations are reserved so writing to 1380 * them does not change anything */ 1381 if (val > PR_FP_EXC_PRECISE) 1382 return -EINVAL; 1383 tsk->thread.fpexc_mode = __pack_fe01(val); 1384 if (regs != NULL && (regs->msr & MSR_FP) != 0) 1385 regs->msr = (regs->msr & ~(MSR_FE0|MSR_FE1)) 1386 | tsk->thread.fpexc_mode; 1387 return 0; 1388} 1389 1390int get_fpexc_mode(struct task_struct *tsk, unsigned long adr) 1391{ 1392 unsigned int val; 1393 1394 if (tsk->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE) 1395#ifdef CONFIG_SPE 1396 if (cpu_has_feature(CPU_FTR_SPE)) { 1397 /* 1398 * When the sticky exception bits are set 1399 * directly by userspace, it must call prctl 1400 * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE 1401 * in the existing prctl settings) or 1402 * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in 1403 * the bits being set). <fenv.h> functions 1404 * saving and restoring the whole 1405 * floating-point environment need to do so 1406 * anyway to restore the prctl settings from 1407 * the saved environment. 1408 */ 1409 tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR); 1410 val = tsk->thread.fpexc_mode; 1411 } else 1412 return -EINVAL; 1413#else 1414 return -EINVAL; 1415#endif 1416 else 1417 val = __unpack_fe01(tsk->thread.fpexc_mode); 1418 return put_user(val, (unsigned int __user *) adr); 1419} 1420 1421int set_endian(struct task_struct *tsk, unsigned int val) 1422{ 1423 struct pt_regs *regs = tsk->thread.regs; 1424 1425 if ((val == PR_ENDIAN_LITTLE && !cpu_has_feature(CPU_FTR_REAL_LE)) || 1426 (val == PR_ENDIAN_PPC_LITTLE && !cpu_has_feature(CPU_FTR_PPC_LE))) 1427 return -EINVAL; 1428 1429 if (regs == NULL) 1430 return -EINVAL; 1431 1432 if (val == PR_ENDIAN_BIG) 1433 regs->msr &= ~MSR_LE; 1434 else if (val == PR_ENDIAN_LITTLE || val == PR_ENDIAN_PPC_LITTLE) 1435 regs->msr |= MSR_LE; 1436 else 1437 return -EINVAL; 1438 1439 return 0; 1440} 1441 1442int get_endian(struct task_struct *tsk, unsigned long adr) 1443{ 1444 struct pt_regs *regs = tsk->thread.regs; 1445 unsigned int val; 1446 1447 if (!cpu_has_feature(CPU_FTR_PPC_LE) && 1448 !cpu_has_feature(CPU_FTR_REAL_LE)) 1449 return -EINVAL; 1450 1451 if (regs == NULL) 1452 return -EINVAL; 1453 1454 if (regs->msr & MSR_LE) { 1455 if (cpu_has_feature(CPU_FTR_REAL_LE)) 1456 val = PR_ENDIAN_LITTLE; 1457 else 1458 val = PR_ENDIAN_PPC_LITTLE; 1459 } else 1460 val = PR_ENDIAN_BIG; 1461 1462 return put_user(val, (unsigned int __user *)adr); 1463} 1464 1465int set_unalign_ctl(struct task_struct *tsk, unsigned int val) 1466{ 1467 tsk->thread.align_ctl = val; 1468 return 0; 1469} 1470 1471int get_unalign_ctl(struct task_struct *tsk, unsigned long adr) 1472{ 1473 return put_user(tsk->thread.align_ctl, (unsigned int __user *)adr); 1474} 1475 1476static inline int valid_irq_stack(unsigned long sp, struct task_struct *p, 1477 unsigned long nbytes) 1478{ 1479 unsigned long stack_page; 1480 unsigned long cpu = task_cpu(p); 1481 1482 /* 1483 * Avoid crashing if the stack has overflowed and corrupted 1484 * task_cpu(p), which is in the thread_info struct. 1485 */ 1486 if (cpu < NR_CPUS && cpu_possible(cpu)) { 1487 stack_page = (unsigned long) hardirq_ctx[cpu]; 1488 if (sp >= stack_page + sizeof(struct thread_struct) 1489 && sp <= stack_page + THREAD_SIZE - nbytes) 1490 return 1; 1491 1492 stack_page = (unsigned long) softirq_ctx[cpu]; 1493 if (sp >= stack_page + sizeof(struct thread_struct) 1494 && sp <= stack_page + THREAD_SIZE - nbytes) 1495 return 1; 1496 } 1497 return 0; 1498} 1499 1500int validate_sp(unsigned long sp, struct task_struct *p, 1501 unsigned long nbytes) 1502{ 1503 unsigned long stack_page = (unsigned long)task_stack_page(p); 1504 1505 if (sp >= stack_page + sizeof(struct thread_struct) 1506 && sp <= stack_page + THREAD_SIZE - nbytes) 1507 return 1; 1508 1509 return valid_irq_stack(sp, p, nbytes); 1510} 1511 1512EXPORT_SYMBOL(validate_sp); 1513 1514unsigned long get_wchan(struct task_struct *p) 1515{ 1516 unsigned long ip, sp; 1517 int count = 0; 1518 1519 if (!p || p == current || p->state == TASK_RUNNING) 1520 return 0; 1521 1522 sp = p->thread.ksp; 1523 if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD)) 1524 return 0; 1525 1526 do { 1527 sp = *(unsigned long *)sp; 1528 if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD)) 1529 return 0; 1530 if (count > 0) { 1531 ip = ((unsigned long *)sp)[STACK_FRAME_LR_SAVE]; 1532 if (!in_sched_functions(ip)) 1533 return ip; 1534 } 1535 } while (count++ < 16); 1536 return 0; 1537} 1538 1539static int kstack_depth_to_print = CONFIG_PRINT_STACK_DEPTH; 1540 1541void show_stack(struct task_struct *tsk, unsigned long *stack) 1542{ 1543 unsigned long sp, ip, lr, newsp; 1544 int count = 0; 1545 int firstframe = 1; 1546#ifdef CONFIG_FUNCTION_GRAPH_TRACER 1547 int curr_frame = current->curr_ret_stack; 1548 extern void return_to_handler(void); 1549 unsigned long rth = (unsigned long)return_to_handler; 1550#endif 1551 1552 sp = (unsigned long) stack; 1553 if (tsk == NULL) 1554 tsk = current; 1555 if (sp == 0) { 1556 if (tsk == current) 1557 sp = current_stack_pointer(); 1558 else 1559 sp = tsk->thread.ksp; 1560 } 1561 1562 lr = 0; 1563 printk("Call Trace:\n"); 1564 do { 1565 if (!validate_sp(sp, tsk, STACK_FRAME_OVERHEAD)) 1566 return; 1567 1568 stack = (unsigned long *) sp; 1569 newsp = stack[0]; 1570 ip = stack[STACK_FRAME_LR_SAVE]; 1571 if (!firstframe || ip != lr) { 1572 printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip); 1573#ifdef CONFIG_FUNCTION_GRAPH_TRACER 1574 if ((ip == rth) && curr_frame >= 0) { 1575 printk(" (%pS)", 1576 (void *)current->ret_stack[curr_frame].ret); 1577 curr_frame--; 1578 } 1579#endif 1580 if (firstframe) 1581 printk(" (unreliable)"); 1582 printk("\n"); 1583 } 1584 firstframe = 0; 1585 1586 /* 1587 * See if this is an exception frame. 1588 * We look for the "regshere" marker in the current frame. 1589 */ 1590 if (validate_sp(sp, tsk, STACK_INT_FRAME_SIZE) 1591 && stack[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) { 1592 struct pt_regs *regs = (struct pt_regs *) 1593 (sp + STACK_FRAME_OVERHEAD); 1594 lr = regs->link; 1595 printk("--- interrupt: %lx at %pS\n LR = %pS\n", 1596 regs->trap, (void *)regs->nip, (void *)lr); 1597 firstframe = 1; 1598 } 1599 1600 sp = newsp; 1601 } while (count++ < kstack_depth_to_print); 1602} 1603 1604#ifdef CONFIG_PPC64 1605/* Called with hard IRQs off */ 1606void notrace __ppc64_runlatch_on(void) 1607{ 1608 struct thread_info *ti = current_thread_info(); 1609 unsigned long ctrl; 1610 1611 ctrl = mfspr(SPRN_CTRLF); 1612 ctrl |= CTRL_RUNLATCH; 1613 mtspr(SPRN_CTRLT, ctrl); 1614 1615 ti->local_flags |= _TLF_RUNLATCH; 1616} 1617 1618/* Called with hard IRQs off */ 1619void notrace __ppc64_runlatch_off(void) 1620{ 1621 struct thread_info *ti = current_thread_info(); 1622 unsigned long ctrl; 1623 1624 ti->local_flags &= ~_TLF_RUNLATCH; 1625 1626 ctrl = mfspr(SPRN_CTRLF); 1627 ctrl &= ~CTRL_RUNLATCH; 1628 mtspr(SPRN_CTRLT, ctrl); 1629} 1630#endif /* CONFIG_PPC64 */ 1631 1632unsigned long arch_align_stack(unsigned long sp) 1633{ 1634 if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) 1635 sp -= get_random_int() & ~PAGE_MASK; 1636 return sp & ~0xf; 1637} 1638 1639static inline unsigned long brk_rnd(void) 1640{ 1641 unsigned long rnd = 0; 1642 1643 /* 8MB for 32bit, 1GB for 64bit */ 1644 if (is_32bit_task()) 1645 rnd = (long)(get_random_int() % (1<<(23-PAGE_SHIFT))); 1646 else 1647 rnd = (long)(get_random_int() % (1<<(30-PAGE_SHIFT))); 1648 1649 return rnd << PAGE_SHIFT; 1650} 1651 1652unsigned long arch_randomize_brk(struct mm_struct *mm) 1653{ 1654 unsigned long base = mm->brk; 1655 unsigned long ret; 1656 1657#ifdef CONFIG_PPC_STD_MMU_64 1658 /* 1659 * If we are using 1TB segments and we are allowed to randomise 1660 * the heap, we can put it above 1TB so it is backed by a 1TB 1661 * segment. Otherwise the heap will be in the bottom 1TB 1662 * which always uses 256MB segments and this may result in a 1663 * performance penalty. 1664 */ 1665 if (!is_32bit_task() && (mmu_highuser_ssize == MMU_SEGSIZE_1T)) 1666 base = max_t(unsigned long, mm->brk, 1UL << SID_SHIFT_1T); 1667#endif 1668 1669 ret = PAGE_ALIGN(base + brk_rnd()); 1670 1671 if (ret < mm->brk) 1672 return mm->brk; 1673 1674 return ret; 1675} 1676 1677