1/* 2 3 bttv-cards.c 4 5 this file has configuration informations - card-specific stuff 6 like the big tvcards array for the most part 7 8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) 9 & Marcus Metzler (mocm@thp.uni-koeln.de) 10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de> 11 12 This program is free software; you can redistribute it and/or modify 13 it under the terms of the GNU General Public License as published by 14 the Free Software Foundation; either version 2 of the License, or 15 (at your option) any later version. 16 17 This program is distributed in the hope that it will be useful, 18 but WITHOUT ANY WARRANTY; without even the implied warranty of 19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 GNU General Public License for more details. 21 22 You should have received a copy of the GNU General Public License 23 along with this program; if not, write to the Free Software 24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 25 26*/ 27 28#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 29 30#include <linux/delay.h> 31#include <linux/module.h> 32#include <linux/kmod.h> 33#include <linux/init.h> 34#include <linux/pci.h> 35#include <linux/vmalloc.h> 36#include <linux/firmware.h> 37#include <net/checksum.h> 38 39#include <asm/unaligned.h> 40#include <asm/io.h> 41 42#include "bttvp.h" 43#include <media/v4l2-common.h> 44#include <media/tvaudio.h> 45#include "bttv-audio-hook.h" 46 47/* fwd decl */ 48static void boot_msp34xx(struct bttv *btv, int pin); 49static void hauppauge_eeprom(struct bttv *btv); 50static void avermedia_eeprom(struct bttv *btv); 51static void osprey_eeprom(struct bttv *btv, const u8 ee[256]); 52static void modtec_eeprom(struct bttv *btv); 53static void init_PXC200(struct bttv *btv); 54static void init_RTV24(struct bttv *btv); 55static void init_PCI8604PW(struct bttv *btv); 56 57static void rv605_muxsel(struct bttv *btv, unsigned int input); 58static void eagle_muxsel(struct bttv *btv, unsigned int input); 59static void xguard_muxsel(struct bttv *btv, unsigned int input); 60static void ivc120_muxsel(struct bttv *btv, unsigned int input); 61static void gvc1100_muxsel(struct bttv *btv, unsigned int input); 62 63static void PXC200_muxsel(struct bttv *btv, unsigned int input); 64 65static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input); 66static void picolo_tetra_init(struct bttv *btv); 67 68static void tibetCS16_muxsel(struct bttv *btv, unsigned int input); 69static void tibetCS16_init(struct bttv *btv); 70 71static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input); 72static void kodicom4400r_init(struct bttv *btv); 73 74static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input); 75static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input); 76 77static void geovision_muxsel(struct bttv *btv, unsigned int input); 78 79static void phytec_muxsel(struct bttv *btv, unsigned int input); 80 81static void gv800s_muxsel(struct bttv *btv, unsigned int input); 82static void gv800s_init(struct bttv *btv); 83 84static void td3116_muxsel(struct bttv *btv, unsigned int input); 85 86static int terratec_active_radio_upgrade(struct bttv *btv); 87static int tea575x_init(struct bttv *btv); 88static void identify_by_eeprom(struct bttv *btv, 89 unsigned char eeprom_data[256]); 90static int pvr_boot(struct bttv *btv); 91 92/* config variables */ 93static unsigned int triton1; 94static unsigned int vsfx; 95static unsigned int latency = UNSET; 96int no_overlay=-1; 97 98static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 99static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 100static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 101static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 102static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 103static unsigned int audiodev[BTTV_MAX]; 104static unsigned int saa6588[BTTV_MAX]; 105static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL }; 106static unsigned int autoload = UNSET; 107static unsigned int gpiomask = UNSET; 108static unsigned int audioall = UNSET; 109static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET }; 110 111/* insmod options */ 112module_param(triton1, int, 0444); 113module_param(vsfx, int, 0444); 114module_param(no_overlay, int, 0444); 115module_param(latency, int, 0444); 116module_param(gpiomask, int, 0444); 117module_param(audioall, int, 0444); 118module_param(autoload, int, 0444); 119 120module_param_array(card, int, NULL, 0444); 121module_param_array(pll, int, NULL, 0444); 122module_param_array(tuner, int, NULL, 0444); 123module_param_array(svhs, int, NULL, 0444); 124module_param_array(remote, int, NULL, 0444); 125module_param_array(audiodev, int, NULL, 0444); 126module_param_array(audiomux, int, NULL, 0444); 127 128MODULE_PARM_DESC(triton1,"set ETBF pci config bit " 129 "[enable bug compatibility for triton1 + others]"); 130MODULE_PARM_DESC(vsfx,"set VSFX pci config bit " 131 "[yet another chipset flaw workaround]"); 132MODULE_PARM_DESC(latency,"pci latency timer"); 133MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list"); 134MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)"); 135MODULE_PARM_DESC(tuner,"specify installed tuner type"); 136MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore"); 137MODULE_PARM_DESC(audiodev, "specify audio device:\n" 138 "\t\t-1 = no audio\n" 139 "\t\t 0 = autodetect (default)\n" 140 "\t\t 1 = msp3400\n" 141 "\t\t 2 = tda7432\n" 142 "\t\t 3 = tvaudio"); 143MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition."); 144MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)" 145 " [some VIA/SIS chipsets are known to have problem with overlay]"); 146 147/* ----------------------------------------------------------------------- */ 148/* list of card IDs for bt878+ cards */ 149 150static struct CARD { 151 unsigned id; 152 int cardnr; 153 char *name; 154} cards[] = { 155 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" }, 156 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" }, 157 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" }, 158 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" }, 159 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" }, 160 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" }, 161 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" }, 162 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" }, 163 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" }, 164 165 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" }, 166 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" }, 167 168 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 169 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" }, 170 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" }, 171 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, 172 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, 173 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" }, 174 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" }, 175 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, 176 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, 177 178 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, 179 /* some cards ship with byteswapped IDs ... */ 180 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, 181 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, 182 /* this seems to happen as well ... */ 183 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, 184 185 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" }, 186 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" }, 187 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" }, 188 189 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" }, 190 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" }, 191 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" }, 192 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" }, 193 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" }, 194 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" }, 195 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" }, 196 197 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, 198 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" }, 199 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, 200 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" }, 201 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" }, 202 203 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" }, 204 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" }, 205 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" }, 206 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" }, 207 208 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" }, 209 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" }, 210 /* clashes with FlyVideo 211 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */ 212 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" }, 213 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */ 214 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */ 215 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */ 216 217 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, 218 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, 219 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 220 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 221 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 222 223 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" }, 224 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" }, 225 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" }, 226 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" }, 227 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" }, 228 229 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" }, 230 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" }, 231 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" }, 232 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" }, 233 234 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" }, 235 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" }, 236 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" }, 237 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" }, 238 239 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" }, 240 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" }, 241 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" }, 242 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" }, 243 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" }, 244 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" }, 245 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" }, 246 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" }, 247 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" }, 248 { 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" }, 249 { 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" }, 250 { 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" }, 251 { 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" }, 252 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" }, 253 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" }, 254 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" }, 255 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" }, 256 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" }, 257 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" }, 258 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" }, 259 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" }, 260 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" }, 261 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" }, 262 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" }, 263 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" }, 264 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" }, 265 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" }, 266 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" }, 267 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" }, 268 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 269 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 270 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 271 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 272 273 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" }, 274 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" }, 275 276 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, 277 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, 278 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" }, 279 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" }, 280 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" }, 281 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" }, 282 283 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" }, 284 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" }, 285 286 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" }, 287 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 288 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 289 { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" }, 290 { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" }, 291 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" }, 292 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" }, 293 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" }, 294 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" }, 295 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" }, 296 297 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" }, 298 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" }, 299 300 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" }, 301 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" }, 302 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" }, 303 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" }, 304 305 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" }, 306 307 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" }, 308 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" }, 309 310 /* likely broken, vendor id doesn't match the other magic views ... 311 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */ 312 313 /* Duplicate PCI ID, reconfigure for this board during the eeprom read. 314 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */ 315 316 { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"}, 317 318 /* DVB cards (using pci function .1 for mpeg data xfer) */ 319 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" }, 320 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, 321 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"}, 322 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" }, 323 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" }, 324 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" }, 325 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" }, 326 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, 327 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" }, 328 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" }, 329 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, 330 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "}, 331 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" }, 332 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" }, 333 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" }, 334 { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" }, 335 { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 336 { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 337 { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 338 339 { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" }, 340 { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" }, 341 { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" }, 342 { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" }, 343 { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" }, 344 { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" }, 345 { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" }, 346 { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" }, 347 { 0x3116f200, BTTV_BOARD_TVT_TD3116, "Tongwei Video Technology TD-3116" }, 348 { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" }, 349 { 0, -1, NULL } 350}; 351 352/* ----------------------------------------------------------------------- */ 353/* array with description for bt848 / bt878 tv/grabber cards */ 354 355struct tvcard bttv_tvcards[] = { 356 /* ---- card 0x00 ---------------------------------- */ 357 [BTTV_BOARD_UNKNOWN] = { 358 .name = " *** UNKNOWN/GENERIC *** ", 359 .video_inputs = 4, 360 .svhs = 2, 361 .muxsel = MUXSEL(2, 3, 1, 0), 362 .tuner_type = UNSET, 363 .tuner_addr = ADDR_UNSET, 364 }, 365 [BTTV_BOARD_MIRO] = { 366 .name = "MIRO PCTV", 367 .video_inputs = 4, 368 /* .audio_inputs= 1, */ 369 .svhs = 2, 370 .gpiomask = 15, 371 .muxsel = MUXSEL(2, 3, 1, 1), 372 .gpiomux = { 2, 0, 0, 0 }, 373 .gpiomute = 10, 374 .tuner_type = UNSET, 375 .tuner_addr = ADDR_UNSET, 376 }, 377 [BTTV_BOARD_HAUPPAUGE] = { 378 .name = "Hauppauge (bt848)", 379 .video_inputs = 4, 380 /* .audio_inputs= 1, */ 381 .svhs = 2, 382 .gpiomask = 7, 383 .muxsel = MUXSEL(2, 3, 1, 1), 384 .gpiomux = { 0, 1, 2, 3 }, 385 .gpiomute = 4, 386 .tuner_type = UNSET, 387 .tuner_addr = ADDR_UNSET, 388 }, 389 [BTTV_BOARD_STB] = { 390 .name = "STB, Gateway P/N 6000699 (bt848)", 391 .video_inputs = 3, 392 /* .audio_inputs= 1, */ 393 .svhs = 2, 394 .gpiomask = 7, 395 .muxsel = MUXSEL(2, 3, 1, 1), 396 .gpiomux = { 4, 0, 2, 3 }, 397 .gpiomute = 1, 398 .no_msp34xx = 1, 399 .tuner_type = TUNER_PHILIPS_NTSC, 400 .tuner_addr = ADDR_UNSET, 401 .pll = PLL_28, 402 .has_radio = 1, 403 }, 404 405 /* ---- card 0x04 ---------------------------------- */ 406 [BTTV_BOARD_INTEL] = { 407 .name = "Intel Create and Share PCI/ Smart Video Recorder III", 408 .video_inputs = 4, 409 /* .audio_inputs= 0, */ 410 .svhs = 2, 411 .gpiomask = 0, 412 .muxsel = MUXSEL(2, 3, 1, 1), 413 .gpiomux = { 0 }, 414 .tuner_type = TUNER_ABSENT, 415 .tuner_addr = ADDR_UNSET, 416 }, 417 [BTTV_BOARD_DIAMOND] = { 418 .name = "Diamond DTV2000", 419 .video_inputs = 4, 420 /* .audio_inputs= 1, */ 421 .svhs = 2, 422 .gpiomask = 3, 423 .muxsel = MUXSEL(2, 3, 1, 0), 424 .gpiomux = { 0, 1, 0, 1 }, 425 .gpiomute = 3, 426 .tuner_type = UNSET, 427 .tuner_addr = ADDR_UNSET, 428 }, 429 [BTTV_BOARD_AVERMEDIA] = { 430 .name = "AVerMedia TVPhone", 431 .video_inputs = 3, 432 /* .audio_inputs= 1, */ 433 .svhs = 3, 434 .muxsel = MUXSEL(2, 3, 1, 1), 435 .gpiomask = 0x0f, 436 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 }, 437 /* 0x04 for some cards ?? */ 438 .tuner_type = UNSET, 439 .tuner_addr = ADDR_UNSET, 440 .audio_mode_gpio= avermedia_tvphone_audio, 441 .has_remote = 1, 442 }, 443 [BTTV_BOARD_MATRIX_VISION] = { 444 .name = "MATRIX-Vision MV-Delta", 445 .video_inputs = 5, 446 /* .audio_inputs= 1, */ 447 .svhs = 3, 448 .gpiomask = 0, 449 .muxsel = MUXSEL(2, 3, 1, 0, 0), 450 .gpiomux = { 0 }, 451 .tuner_type = TUNER_ABSENT, 452 .tuner_addr = ADDR_UNSET, 453 }, 454 455 /* ---- card 0x08 ---------------------------------- */ 456 [BTTV_BOARD_FLYVIDEO] = { 457 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26", 458 .video_inputs = 4, 459 /* .audio_inputs= 1, */ 460 .svhs = 2, 461 .gpiomask = 0xc00, 462 .muxsel = MUXSEL(2, 3, 1, 1), 463 .gpiomux = { 0, 0xc00, 0x800, 0x400 }, 464 .gpiomute = 0xc00, 465 .pll = PLL_28, 466 .tuner_type = UNSET, 467 .tuner_addr = ADDR_UNSET, 468 }, 469 [BTTV_BOARD_TURBOTV] = { 470 .name = "IMS/IXmicro TurboTV", 471 .video_inputs = 3, 472 /* .audio_inputs= 1, */ 473 .svhs = 2, 474 .gpiomask = 3, 475 .muxsel = MUXSEL(2, 3, 1, 1), 476 .gpiomux = { 1, 1, 2, 3 }, 477 .pll = PLL_28, 478 .tuner_type = TUNER_TEMIC_PAL, 479 .tuner_addr = ADDR_UNSET, 480 }, 481 [BTTV_BOARD_HAUPPAUGE878] = { 482 .name = "Hauppauge (bt878)", 483 .video_inputs = 4, 484 /* .audio_inputs= 1, */ 485 .svhs = 2, 486 .gpiomask = 0x0f, /* old: 7 */ 487 .muxsel = MUXSEL(2, 0, 1, 1), 488 .gpiomux = { 0, 1, 2, 3 }, 489 .gpiomute = 4, 490 .pll = PLL_28, 491 .tuner_type = UNSET, 492 .tuner_addr = ADDR_UNSET, 493 }, 494 [BTTV_BOARD_MIROPRO] = { 495 .name = "MIRO PCTV pro", 496 .video_inputs = 3, 497 /* .audio_inputs= 1, */ 498 .svhs = 2, 499 .gpiomask = 0x3014f, 500 .muxsel = MUXSEL(2, 3, 1, 1), 501 .gpiomux = { 0x20001,0x10001, 0, 0 }, 502 .gpiomute = 10, 503 .tuner_type = UNSET, 504 .tuner_addr = ADDR_UNSET, 505 }, 506 507 /* ---- card 0x0c ---------------------------------- */ 508 [BTTV_BOARD_ADSTECH_TV] = { 509 .name = "ADS Technologies Channel Surfer TV (bt848)", 510 .video_inputs = 3, 511 /* .audio_inputs= 1, */ 512 .svhs = 2, 513 .gpiomask = 15, 514 .muxsel = MUXSEL(2, 3, 1, 1), 515 .gpiomux = { 13, 14, 11, 7 }, 516 .tuner_type = UNSET, 517 .tuner_addr = ADDR_UNSET, 518 }, 519 [BTTV_BOARD_AVERMEDIA98] = { 520 .name = "AVerMedia TVCapture 98", 521 .video_inputs = 3, 522 /* .audio_inputs= 4, */ 523 .svhs = 2, 524 .gpiomask = 15, 525 .muxsel = MUXSEL(2, 3, 1, 1), 526 .gpiomux = { 13, 14, 11, 7 }, 527 .msp34xx_alt = 1, 528 .pll = PLL_28, 529 .tuner_type = TUNER_PHILIPS_PAL, 530 .tuner_addr = ADDR_UNSET, 531 .audio_mode_gpio= avermedia_tv_stereo_audio, 532 .no_gpioirq = 1, 533 }, 534 [BTTV_BOARD_VHX] = { 535 .name = "Aimslab Video Highway Xtreme (VHX)", 536 .video_inputs = 3, 537 /* .audio_inputs= 1, */ 538 .svhs = 2, 539 .gpiomask = 7, 540 .muxsel = MUXSEL(2, 3, 1, 1), 541 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */ 542 .gpiomute = 4, 543 .pll = PLL_28, 544 .tuner_type = UNSET, 545 .tuner_addr = ADDR_UNSET, 546 }, 547 [BTTV_BOARD_ZOLTRIX] = { 548 .name = "Zoltrix TV-Max", 549 .video_inputs = 3, 550 /* .audio_inputs= 1, */ 551 .svhs = 2, 552 .gpiomask = 15, 553 .muxsel = MUXSEL(2, 3, 1, 1), 554 .gpiomux = { 0, 0, 1, 0 }, 555 .gpiomute = 10, 556 .tuner_type = UNSET, 557 .tuner_addr = ADDR_UNSET, 558 }, 559 560 /* ---- card 0x10 ---------------------------------- */ 561 [BTTV_BOARD_PIXVIEWPLAYTV] = { 562 .name = "Prolink Pixelview PlayTV (bt878)", 563 .video_inputs = 3, 564 /* .audio_inputs= 1, */ 565 .svhs = 2, 566 .gpiomask = 0x01fe00, 567 .muxsel = MUXSEL(2, 3, 1, 1), 568 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */ 569 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, 570 .gpiomute = 0x002000, 571 .pll = PLL_28, 572 .tuner_type = UNSET, 573 .tuner_addr = ADDR_UNSET, 574 }, 575 [BTTV_BOARD_WINVIEW_601] = { 576 .name = "Leadtek WinView 601", 577 .video_inputs = 3, 578 /* .audio_inputs= 1, */ 579 .svhs = 2, 580 .gpiomask = 0x8300f8, 581 .muxsel = MUXSEL(2, 3, 1, 1, 0), 582 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 }, 583 .gpiomute = 0xcfa007, 584 .tuner_type = UNSET, 585 .tuner_addr = ADDR_UNSET, 586 .volume_gpio = winview_volume, 587 .has_radio = 1, 588 }, 589 [BTTV_BOARD_AVEC_INTERCAP] = { 590 .name = "AVEC Intercapture", 591 .video_inputs = 3, 592 /* .audio_inputs= 2, */ 593 .svhs = 2, 594 .gpiomask = 0, 595 .muxsel = MUXSEL(2, 3, 1, 1), 596 .gpiomux = { 1, 0, 0, 0 }, 597 .tuner_type = UNSET, 598 .tuner_addr = ADDR_UNSET, 599 }, 600 [BTTV_BOARD_LIFE_FLYKIT] = { 601 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)", 602 .video_inputs = 4, 603 /* .audio_inputs= 1, */ 604 .svhs = NO_SVHS, 605 .gpiomask = 0x8dff00, 606 .muxsel = MUXSEL(2, 3, 1, 1), 607 .gpiomux = { 0 }, 608 .no_msp34xx = 1, 609 .tuner_type = TUNER_ABSENT, 610 .tuner_addr = ADDR_UNSET, 611 }, 612 613 /* ---- card 0x14 ---------------------------------- */ 614 [BTTV_BOARD_CEI_RAFFLES] = { 615 .name = "CEI Raffles Card", 616 .video_inputs = 3, 617 /* .audio_inputs= 3, */ 618 .svhs = 2, 619 .muxsel = MUXSEL(2, 3, 1, 1), 620 .tuner_type = UNSET, 621 .tuner_addr = ADDR_UNSET, 622 }, 623 [BTTV_BOARD_CONFERENCETV] = { 624 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50", 625 .video_inputs = 4, 626 /* .audio_inputs= 2, tuner, line in */ 627 .svhs = 2, 628 .gpiomask = 0x1800, 629 .muxsel = MUXSEL(2, 3, 1, 1), 630 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 631 .gpiomute = 0x1800, 632 .pll = PLL_28, 633 .tuner_type = TUNER_PHILIPS_PAL_I, 634 .tuner_addr = ADDR_UNSET, 635 }, 636 [BTTV_BOARD_PHOEBE_TVMAS] = { 637 .name = "Askey CPH050/ Phoebe Tv Master + FM", 638 .video_inputs = 3, 639 /* .audio_inputs= 1, */ 640 .svhs = 2, 641 .gpiomask = 0xc00, 642 .muxsel = MUXSEL(2, 3, 1, 1), 643 .gpiomux = { 0, 1, 0x800, 0x400 }, 644 .gpiomute = 0xc00, 645 .pll = PLL_28, 646 .tuner_type = UNSET, 647 .tuner_addr = ADDR_UNSET, 648 }, 649 [BTTV_BOARD_MODTEC_205] = { 650 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878", 651 .video_inputs = 3, 652 /* .audio_inputs= 1, */ 653 .svhs = NO_SVHS, 654 .has_dig_in = 1, 655 .gpiomask = 7, 656 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */ 657 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 658 .gpiomux = { 0, 0, 0, 0 }, 659 .no_msp34xx = 1, 660 .pll = PLL_28, 661 .tuner_type = TUNER_ALPS_TSBB5_PAL_I, 662 .tuner_addr = ADDR_UNSET, 663 }, 664 665 /* ---- card 0x18 ---------------------------------- */ 666 [BTTV_BOARD_MAGICTVIEW061] = { 667 .name = "Askey CPH05X/06X (bt878) [many vendors]", 668 .video_inputs = 3, 669 /* .audio_inputs= 1, */ 670 .svhs = 2, 671 .gpiomask = 0xe00, 672 .muxsel = MUXSEL(2, 3, 1, 1), 673 .gpiomux = {0x400, 0x400, 0x400, 0x400 }, 674 .gpiomute = 0xc00, 675 .pll = PLL_28, 676 .tuner_type = UNSET, 677 .tuner_addr = ADDR_UNSET, 678 .has_remote = 1, 679 .has_radio = 1, /* not every card has radio */ 680 }, 681 [BTTV_BOARD_VOBIS_BOOSTAR] = { 682 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar", 683 .video_inputs = 3, 684 /* .audio_inputs= 1, */ 685 .svhs = 2, 686 .gpiomask = 0x1f0fff, 687 .muxsel = MUXSEL(2, 3, 1, 1), 688 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, 689 .gpiomute = 0x40000, 690 .tuner_type = TUNER_PHILIPS_PAL, 691 .tuner_addr = ADDR_UNSET, 692 .audio_mode_gpio= terratv_audio, 693 }, 694 [BTTV_BOARD_HAUPPAUG_WCAM] = { 695 .name = "Hauppauge WinCam newer (bt878)", 696 .video_inputs = 4, 697 /* .audio_inputs= 1, */ 698 .svhs = 3, 699 .gpiomask = 7, 700 .muxsel = MUXSEL(2, 0, 1, 1), 701 .gpiomux = { 0, 1, 2, 3 }, 702 .gpiomute = 4, 703 .tuner_type = UNSET, 704 .tuner_addr = ADDR_UNSET, 705 }, 706 [BTTV_BOARD_MAXI] = { 707 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50", 708 .video_inputs = 4, 709 /* .audio_inputs= 2, */ 710 .svhs = 2, 711 .gpiomask = 0x1800, 712 .muxsel = MUXSEL(2, 3, 1, 1), 713 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 714 .gpiomute = 0x1800, 715 .pll = PLL_28, 716 .tuner_type = TUNER_PHILIPS_SECAM, 717 .tuner_addr = ADDR_UNSET, 718 }, 719 720 /* ---- card 0x1c ---------------------------------- */ 721 [BTTV_BOARD_TERRATV] = { 722 .name = "Terratec TerraTV+ Version 1.1 (bt878)", 723 .video_inputs = 3, 724 /* .audio_inputs= 1, */ 725 .svhs = 2, 726 .gpiomask = 0x1f0fff, 727 .muxsel = MUXSEL(2, 3, 1, 1), 728 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 }, 729 .gpiomute = 0x40000, 730 .tuner_type = TUNER_PHILIPS_PAL, 731 .tuner_addr = ADDR_UNSET, 732 .audio_mode_gpio= terratv_audio, 733 /* GPIO wiring: 734 External 20 pin connector (for Active Radio Upgrade board) 735 gpio00: i2c-sda 736 gpio01: i2c-scl 737 gpio02: om5610-data 738 gpio03: om5610-clk 739 gpio04: om5610-wre 740 gpio05: om5610-stereo 741 gpio06: rds6588-davn 742 gpio07: Pin 7 n.c. 743 gpio08: nIOW 744 gpio09+10: nIOR, nSEL ?? (bt878) 745 gpio09: nIOR (bt848) 746 gpio10: nSEL (bt848) 747 Sound Routing: 748 gpio16: u2-A0 (1st 4052bt) 749 gpio17: u2-A1 750 gpio18: u2-nEN 751 gpio19: u4-A0 (2nd 4052) 752 gpio20: u4-A1 753 u4-nEN - GND 754 Btspy: 755 00000 : Cdrom (internal audio input) 756 10000 : ext. Video audio input 757 20000 : TV Mono 758 a0000 : TV Mono/2 759 1a0000 : TV Stereo 760 30000 : Radio 761 40000 : Mute 762 */ 763 764 }, 765 [BTTV_BOARD_PXC200] = { 766 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */ 767 .name = "Imagenation PXC200", 768 .video_inputs = 5, 769 /* .audio_inputs= 1, */ 770 .svhs = 1, /* was: 4 */ 771 .gpiomask = 0, 772 .muxsel = MUXSEL(2, 3, 1, 0, 0), 773 .gpiomux = { 0 }, 774 .tuner_type = TUNER_ABSENT, 775 .tuner_addr = ADDR_UNSET, 776 .muxsel_hook = PXC200_muxsel, 777 778 }, 779 [BTTV_BOARD_FLYVIDEO_98] = { 780 .name = "Lifeview FlyVideo 98 LR50", 781 .video_inputs = 4, 782 /* .audio_inputs= 1, */ 783 .svhs = 2, 784 .gpiomask = 0x1800, /* 0x8dfe00 */ 785 .muxsel = MUXSEL(2, 3, 1, 1), 786 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 }, 787 .gpiomute = 0x1800, 788 .pll = PLL_28, 789 .tuner_type = UNSET, 790 .tuner_addr = ADDR_UNSET, 791 }, 792 [BTTV_BOARD_IPROTV] = { 793 .name = "Formac iProTV, Formac ProTV I (bt848)", 794 .video_inputs = 4, 795 /* .audio_inputs= 1, */ 796 .svhs = 3, 797 .gpiomask = 1, 798 .muxsel = MUXSEL(2, 3, 1, 1), 799 .gpiomux = { 1, 0, 0, 0 }, 800 .pll = PLL_28, 801 .tuner_type = TUNER_PHILIPS_PAL, 802 .tuner_addr = ADDR_UNSET, 803 }, 804 805 /* ---- card 0x20 ---------------------------------- */ 806 [BTTV_BOARD_INTEL_C_S_PCI] = { 807 .name = "Intel Create and Share PCI/ Smart Video Recorder III", 808 .video_inputs = 4, 809 /* .audio_inputs= 0, */ 810 .svhs = 2, 811 .gpiomask = 0, 812 .muxsel = MUXSEL(2, 3, 1, 1), 813 .gpiomux = { 0 }, 814 .tuner_type = TUNER_ABSENT, 815 .tuner_addr = ADDR_UNSET, 816 }, 817 [BTTV_BOARD_TERRATVALUE] = { 818 .name = "Terratec TerraTValue Version Bt878", 819 .video_inputs = 3, 820 /* .audio_inputs= 1, */ 821 .svhs = 2, 822 .gpiomask = 0xffff00, 823 .muxsel = MUXSEL(2, 3, 1, 1), 824 .gpiomux = { 0x500, 0, 0x300, 0x900 }, 825 .gpiomute = 0x900, 826 .pll = PLL_28, 827 .tuner_type = TUNER_PHILIPS_PAL, 828 .tuner_addr = ADDR_UNSET, 829 }, 830 [BTTV_BOARD_WINFAST2000] = { 831 .name = "Leadtek WinFast 2000/ WinFast 2000 XP", 832 .video_inputs = 4, 833 /* .audio_inputs= 1, */ 834 .svhs = 2, 835 /* TV, CVid, SVid, CVid over SVid connector */ 836 .muxsel = MUXSEL(2, 3, 1, 1, 0), 837 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */ 838 .gpiomask = 0xb33000, 839 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 }, 840 .gpiomute = 0x800000, 841 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) 842 gpio23 -- hef4052:nEnable (0x800000) 843 gpio12 -- hef4052:A1 844 gpio13 -- hef4052:A0 845 0x0000: external audio 846 0x1000: FM 847 0x2000: TV 848 0x3000: n.c. 849 Note: There exists another variant "Winfast 2000" with tv stereo !? 850 Note: eeprom only contains FF and pci subsystem id 107d:6606 851 */ 852 .pll = PLL_28, 853 .has_radio = 1, 854 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */ 855 .tuner_addr = ADDR_UNSET, 856 .audio_mode_gpio= winfast2000_audio, 857 .has_remote = 1, 858 }, 859 [BTTV_BOARD_CHRONOS_VS2] = { 860 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II", 861 .video_inputs = 4, 862 /* .audio_inputs= 3, */ 863 .svhs = 2, 864 .gpiomask = 0x1800, 865 .muxsel = MUXSEL(2, 3, 1, 1), 866 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 867 .gpiomute = 0x1800, 868 .pll = PLL_28, 869 .tuner_type = UNSET, 870 .tuner_addr = ADDR_UNSET, 871 }, 872 873 /* ---- card 0x24 ---------------------------------- */ 874 [BTTV_BOARD_TYPHOON_TVIEW] = { 875 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner", 876 .video_inputs = 4, 877 /* .audio_inputs= 3, */ 878 .svhs = 2, 879 .gpiomask = 0x1800, 880 .muxsel = MUXSEL(2, 3, 1, 1), 881 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 882 .gpiomute = 0x1800, 883 .pll = PLL_28, 884 .tuner_type = UNSET, 885 .tuner_addr = ADDR_UNSET, 886 .has_radio = 1, 887 }, 888 [BTTV_BOARD_PXELVWPLTVPRO] = { 889 .name = "Prolink PixelView PlayTV pro", 890 .video_inputs = 3, 891 /* .audio_inputs= 1, */ 892 .svhs = 2, 893 .gpiomask = 0xff, 894 .muxsel = MUXSEL(2, 3, 1, 1), 895 .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, 896 .gpiomute = 0x29, 897 .no_msp34xx = 1, 898 .pll = PLL_28, 899 .tuner_type = UNSET, 900 .tuner_addr = ADDR_UNSET, 901 }, 902 [BTTV_BOARD_MAGICTVIEW063] = { 903 .name = "Askey CPH06X TView99", 904 .video_inputs = 4, 905 /* .audio_inputs= 1, */ 906 .svhs = 2, 907 .gpiomask = 0x551e00, 908 .muxsel = MUXSEL(2, 3, 1, 0), 909 .gpiomux = { 0x551400, 0x551200, 0, 0 }, 910 .gpiomute = 0x551c00, 911 .pll = PLL_28, 912 .tuner_type = TUNER_PHILIPS_PAL_I, 913 .tuner_addr = ADDR_UNSET, 914 .has_remote = 1, 915 }, 916 [BTTV_BOARD_PINNACLE] = { 917 .name = "Pinnacle PCTV Studio/Rave", 918 .video_inputs = 3, 919 /* .audio_inputs= 1, */ 920 .svhs = 2, 921 .gpiomask = 0x03000F, 922 .muxsel = MUXSEL(2, 3, 1, 1), 923 .gpiomux = { 2, 0xd0001, 0, 0 }, 924 .gpiomute = 1, 925 .pll = PLL_28, 926 .tuner_type = UNSET, 927 .tuner_addr = ADDR_UNSET, 928 }, 929 930 /* ---- card 0x28 ---------------------------------- */ 931 [BTTV_BOARD_STB2] = { 932 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100", 933 .video_inputs = 3, 934 /* .audio_inputs= 1, */ 935 .svhs = 2, 936 .gpiomask = 7, 937 .muxsel = MUXSEL(2, 3, 1, 1), 938 .gpiomux = { 4, 0, 2, 3 }, 939 .gpiomute = 1, 940 .no_msp34xx = 1, 941 .tuner_type = TUNER_PHILIPS_NTSC, 942 .tuner_addr = ADDR_UNSET, 943 .pll = PLL_28, 944 .has_radio = 1, 945 }, 946 [BTTV_BOARD_AVPHONE98] = { 947 .name = "AVerMedia TVPhone 98", 948 .video_inputs = 3, 949 /* .audio_inputs= 4, */ 950 .svhs = 2, 951 .gpiomask = 15, 952 .muxsel = MUXSEL(2, 3, 1, 1), 953 .gpiomux = { 13, 4, 11, 7 }, 954 .pll = PLL_28, 955 .tuner_type = UNSET, 956 .tuner_addr = ADDR_UNSET, 957 .has_radio = 1, 958 .audio_mode_gpio= avermedia_tvphone_audio, 959 }, 960 [BTTV_BOARD_PV951] = { 961 .name = "ProVideo PV951", /* pic16c54 */ 962 .video_inputs = 3, 963 /* .audio_inputs= 1, */ 964 .svhs = 2, 965 .gpiomask = 0, 966 .muxsel = MUXSEL(2, 3, 1, 1), 967 .gpiomux = { 0, 0, 0, 0}, 968 .no_msp34xx = 1, 969 .pll = PLL_28, 970 .tuner_type = TUNER_PHILIPS_PAL_I, 971 .tuner_addr = ADDR_UNSET, 972 }, 973 [BTTV_BOARD_ONAIR_TV] = { 974 .name = "Little OnAir TV", 975 .video_inputs = 3, 976 /* .audio_inputs= 1, */ 977 .svhs = 2, 978 .gpiomask = 0xe00b, 979 .muxsel = MUXSEL(2, 3, 1, 1), 980 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 }, 981 .gpiomute = 0xff3ffc, 982 .no_msp34xx = 1, 983 .tuner_type = UNSET, 984 .tuner_addr = ADDR_UNSET, 985 }, 986 987 /* ---- card 0x2c ---------------------------------- */ 988 [BTTV_BOARD_SIGMA_TVII_FM] = { 989 .name = "Sigma TVII-FM", 990 .video_inputs = 2, 991 /* .audio_inputs= 1, */ 992 .svhs = NO_SVHS, 993 .gpiomask = 3, 994 .muxsel = MUXSEL(2, 3, 1, 1), 995 .gpiomux = { 1, 1, 0, 2 }, 996 .gpiomute = 3, 997 .no_msp34xx = 1, 998 .pll = PLL_NONE, 999 .tuner_type = UNSET, 1000 .tuner_addr = ADDR_UNSET, 1001 }, 1002 [BTTV_BOARD_MATRIX_VISION2] = { 1003 .name = "MATRIX-Vision MV-Delta 2", 1004 .video_inputs = 5, 1005 /* .audio_inputs= 1, */ 1006 .svhs = 3, 1007 .gpiomask = 0, 1008 .muxsel = MUXSEL(2, 3, 1, 0, 0), 1009 .gpiomux = { 0 }, 1010 .no_msp34xx = 1, 1011 .pll = PLL_28, 1012 .tuner_type = TUNER_ABSENT, 1013 .tuner_addr = ADDR_UNSET, 1014 }, 1015 [BTTV_BOARD_ZOLTRIX_GENIE] = { 1016 .name = "Zoltrix Genie TV/FM", 1017 .video_inputs = 3, 1018 /* .audio_inputs= 1, */ 1019 .svhs = 2, 1020 .gpiomask = 0xbcf03f, 1021 .muxsel = MUXSEL(2, 3, 1, 1), 1022 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 }, 1023 .gpiomute = 0xbcb03f, 1024 .no_msp34xx = 1, 1025 .pll = PLL_28, 1026 .tuner_type = TUNER_TEMIC_4039FR5_NTSC, 1027 .tuner_addr = ADDR_UNSET, 1028 }, 1029 [BTTV_BOARD_TERRATVRADIO] = { 1030 .name = "Terratec TV/Radio+", 1031 .video_inputs = 3, 1032 /* .audio_inputs= 1, */ 1033 .svhs = 2, 1034 .gpiomask = 0x70000, 1035 .muxsel = MUXSEL(2, 3, 1, 1), 1036 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, 1037 .gpiomute = 0x40000, 1038 .no_msp34xx = 1, 1039 .pll = PLL_35, 1040 .tuner_type = TUNER_PHILIPS_PAL_I, 1041 .tuner_addr = ADDR_UNSET, 1042 .has_radio = 1, 1043 }, 1044 1045 /* ---- card 0x30 ---------------------------------- */ 1046 [BTTV_BOARD_DYNALINK] = { 1047 .name = "Askey CPH03x/ Dynalink Magic TView", 1048 .video_inputs = 3, 1049 /* .audio_inputs= 1, */ 1050 .svhs = 2, 1051 .gpiomask = 15, 1052 .muxsel = MUXSEL(2, 3, 1, 1), 1053 .gpiomux = {2,0,0,0 }, 1054 .gpiomute = 1, 1055 .pll = PLL_28, 1056 .tuner_type = UNSET, 1057 .tuner_addr = ADDR_UNSET, 1058 }, 1059 [BTTV_BOARD_GVBCTV3PCI] = { 1060 .name = "IODATA GV-BCTV3/PCI", 1061 .video_inputs = 3, 1062 /* .audio_inputs= 1, */ 1063 .svhs = 2, 1064 .gpiomask = 0x010f00, 1065 .muxsel = MUXSEL(2, 3, 0, 0), 1066 .gpiomux = {0x10000, 0, 0x10000, 0 }, 1067 .no_msp34xx = 1, 1068 .pll = PLL_28, 1069 .tuner_type = TUNER_ALPS_TSHC6_NTSC, 1070 .tuner_addr = ADDR_UNSET, 1071 .audio_mode_gpio= gvbctv3pci_audio, 1072 }, 1073 [BTTV_BOARD_PXELVWPLTVPAK] = { 1074 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP", 1075 .video_inputs = 5, 1076 /* .audio_inputs= 1, */ 1077 .svhs = 3, 1078 .has_dig_in = 1, 1079 .gpiomask = 0xAA0000, 1080 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ 1081 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 1082 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 }, 1083 .gpiomute = 0xa8000, 1084 .no_msp34xx = 1, 1085 .pll = PLL_28, 1086 .tuner_type = TUNER_PHILIPS_PAL_I, 1087 .tuner_addr = ADDR_UNSET, 1088 .has_remote = 1, 1089 /* GPIO wiring: (different from Rev.4C !) 1090 GPIO17: U4.A0 (first hef4052bt) 1091 GPIO19: U4.A1 1092 GPIO20: U5.A1 (second hef4052bt) 1093 GPIO21: U4.nEN 1094 GPIO22: BT832 Reset Line 1095 GPIO23: A5,A0, U5,nEN 1096 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22 1097 */ 1098 }, 1099 [BTTV_BOARD_EAGLE] = { 1100 .name = "Eagle Wireless Capricorn2 (bt878A)", 1101 .video_inputs = 4, 1102 /* .audio_inputs= 1, */ 1103 .svhs = 2, 1104 .gpiomask = 7, 1105 .muxsel = MUXSEL(2, 0, 1, 1), 1106 .gpiomux = { 0, 1, 2, 3 }, 1107 .gpiomute = 4, 1108 .pll = PLL_28, 1109 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */, 1110 .tuner_addr = ADDR_UNSET, 1111 }, 1112 1113 /* ---- card 0x34 ---------------------------------- */ 1114 [BTTV_BOARD_PINNACLEPRO] = { 1115 /* David Härdeman <david@2gen.com> */ 1116 .name = "Pinnacle PCTV Studio Pro", 1117 .video_inputs = 4, 1118 /* .audio_inputs= 1, */ 1119 .svhs = 3, 1120 .gpiomask = 0x03000F, 1121 .muxsel = MUXSEL(2, 3, 1, 1), 1122 .gpiomux = { 1, 0xd0001, 0, 0 }, 1123 .gpiomute = 10, 1124 /* sound path (5 sources): 1125 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) 1126 0= ext. Audio IN 1127 1= from MUX2 1128 2= Mono TV sound from Tuner 1129 3= not connected 1130 MUX2 (mask 0x30000): 1131 0,2,3= from MSP34xx 1132 1= FM stereo Radio from Tuner */ 1133 .pll = PLL_28, 1134 .tuner_type = UNSET, 1135 .tuner_addr = ADDR_UNSET, 1136 }, 1137 [BTTV_BOARD_TVIEW_RDS_FM] = { 1138 /* Claas Langbehn <claas@bigfoot.com>, 1139 Sven Grothklags <sven@upb.de> */ 1140 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS", 1141 .video_inputs = 4, 1142 /* .audio_inputs= 3, */ 1143 .svhs = 2, 1144 .gpiomask = 0x1c, 1145 .muxsel = MUXSEL(2, 3, 1, 1), 1146 .gpiomux = { 0, 0, 0x10, 8 }, 1147 .gpiomute = 4, 1148 .pll = PLL_28, 1149 .tuner_type = TUNER_PHILIPS_PAL, 1150 .tuner_addr = ADDR_UNSET, 1151 .has_radio = 1, 1152 }, 1153 [BTTV_BOARD_LIFETEC_9415] = { 1154 /* Tim Röstermundt <rosterm@uni-muenster.de> 1155 in de.comp.os.unix.linux.hardware: 1156 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 1157 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff 1158 options tuner type=5 */ 1159 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", 1160 .video_inputs = 4, 1161 /* .audio_inputs= 1, */ 1162 .svhs = 2, 1163 .gpiomask = 0x18e0, 1164 .muxsel = MUXSEL(2, 3, 1, 1), 1165 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, 1166 .gpiomute = 0x18e0, 1167 /* For cards with tda9820/tda9821: 1168 0x0000: Tuner normal stereo 1169 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) 1170 0x0880: Tuner A2 stereo */ 1171 .pll = PLL_28, 1172 .tuner_type = UNSET, 1173 .tuner_addr = ADDR_UNSET, 1174 }, 1175 [BTTV_BOARD_BESTBUY_EASYTV] = { 1176 /* Miguel Angel Alvarez <maacruz@navegalia.com> 1177 old Easy TV BT848 version (model CPH031) */ 1178 .name = "Askey CPH031/ BESTBUY Easy TV", 1179 .video_inputs = 4, 1180 /* .audio_inputs= 1, */ 1181 .svhs = 2, 1182 .gpiomask = 0xF, 1183 .muxsel = MUXSEL(2, 3, 1, 0), 1184 .gpiomux = { 2, 0, 0, 0 }, 1185 .gpiomute = 10, 1186 .pll = PLL_28, 1187 .tuner_type = TUNER_TEMIC_PAL, 1188 .tuner_addr = ADDR_UNSET, 1189 }, 1190 1191 /* ---- card 0x38 ---------------------------------- */ 1192 [BTTV_BOARD_FLYVIDEO_98FM] = { 1193 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */ 1194 .name = "Lifeview FlyVideo 98FM LR50", 1195 .video_inputs = 4, 1196 /* .audio_inputs= 3, */ 1197 .svhs = 2, 1198 .gpiomask = 0x1800, 1199 .muxsel = MUXSEL(2, 3, 1, 1), 1200 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 1201 .gpiomute = 0x1800, 1202 .pll = PLL_28, 1203 .tuner_type = TUNER_PHILIPS_PAL, 1204 .tuner_addr = ADDR_UNSET, 1205 }, 1206 /* This is the ultimate cheapo capture card 1207 * just a BT848A on a small PCB! 1208 * Steve Hosgood <steve@equiinet.com> */ 1209 [BTTV_BOARD_GRANDTEC] = { 1210 .name = "GrandTec 'Grand Video Capture' (Bt848)", 1211 .video_inputs = 2, 1212 /* .audio_inputs= 0, */ 1213 .svhs = 1, 1214 .gpiomask = 0, 1215 .muxsel = MUXSEL(3, 1), 1216 .gpiomux = { 0 }, 1217 .no_msp34xx = 1, 1218 .pll = PLL_35, 1219 .tuner_type = TUNER_ABSENT, 1220 .tuner_addr = ADDR_UNSET, 1221 }, 1222 [BTTV_BOARD_ASKEY_CPH060] = { 1223 /* Daniel Herrington <daniel.herrington@home.com> */ 1224 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)", 1225 .video_inputs = 3, 1226 /* .audio_inputs= 1, */ 1227 .svhs = 2, 1228 .gpiomask = 0xe00, 1229 .muxsel = MUXSEL(2, 3, 1, 1), 1230 .gpiomux = { 0x400, 0x400, 0x400, 0x400 }, 1231 .gpiomute = 0x800, 1232 .pll = PLL_28, 1233 .tuner_type = TUNER_TEMIC_4036FY5_NTSC, 1234 .tuner_addr = ADDR_UNSET, 1235 }, 1236 [BTTV_BOARD_ASKEY_CPH03X] = { 1237 /* Matti Mottus <mottus@physic.ut.ee> */ 1238 .name = "Askey CPH03x TV Capturer", 1239 .video_inputs = 4, 1240 /* .audio_inputs= 1, */ 1241 .svhs = 2, 1242 .gpiomask = 0x03000F, 1243 .muxsel = MUXSEL(2, 3, 1, 0), 1244 .gpiomux = { 2, 0, 0, 0 }, 1245 .gpiomute = 1, 1246 .pll = PLL_28, 1247 .tuner_type = TUNER_TEMIC_PAL, 1248 .tuner_addr = ADDR_UNSET, 1249 .has_remote = 1, 1250 }, 1251 1252 /* ---- card 0x3c ---------------------------------- */ 1253 [BTTV_BOARD_MM100PCTV] = { 1254 /* Philip Blundell <philb@gnu.org> */ 1255 .name = "Modular Technology MM100PCTV", 1256 .video_inputs = 2, 1257 /* .audio_inputs= 2, */ 1258 .svhs = NO_SVHS, 1259 .gpiomask = 11, 1260 .muxsel = MUXSEL(2, 3, 1, 1), 1261 .gpiomux = { 2, 0, 0, 1 }, 1262 .gpiomute = 8, 1263 .pll = PLL_35, 1264 .tuner_type = TUNER_TEMIC_PAL, 1265 .tuner_addr = ADDR_UNSET, 1266 }, 1267 [BTTV_BOARD_GMV1] = { 1268 /* Adrian Cox <adrian@humboldt.co.uk */ 1269 .name = "AG Electronics GMV1", 1270 .video_inputs = 2, 1271 /* .audio_inputs= 0, */ 1272 .svhs = 1, 1273 .gpiomask = 0xF, 1274 .muxsel = MUXSEL(2, 2), 1275 .gpiomux = { }, 1276 .no_msp34xx = 1, 1277 .pll = PLL_28, 1278 .tuner_type = TUNER_ABSENT, 1279 .tuner_addr = ADDR_UNSET, 1280 }, 1281 [BTTV_BOARD_BESTBUY_EASYTV2] = { 1282 /* Miguel Angel Alvarez <maacruz@navegalia.com> 1283 new Easy TV BT878 version (model CPH061) 1284 special thanks to Informatica Mieres for providing the card */ 1285 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)", 1286 .video_inputs = 3, 1287 /* .audio_inputs= 2, */ 1288 .svhs = 2, 1289 .gpiomask = 0xFF, 1290 .muxsel = MUXSEL(2, 3, 1, 0), 1291 .gpiomux = { 1, 0, 4, 4 }, 1292 .gpiomute = 9, 1293 .pll = PLL_28, 1294 .tuner_type = TUNER_PHILIPS_PAL, 1295 .tuner_addr = ADDR_UNSET, 1296 }, 1297 [BTTV_BOARD_ATI_TVWONDER] = { 1298 /* Lukas Gebauer <geby@volny.cz> */ 1299 .name = "ATI TV-Wonder", 1300 .video_inputs = 3, 1301 /* .audio_inputs= 1, */ 1302 .svhs = 2, 1303 .gpiomask = 0xf03f, 1304 .muxsel = MUXSEL(2, 3, 1, 0), 1305 .gpiomux = { 0xbffe, 0, 0xbfff, 0 }, 1306 .gpiomute = 0xbffe, 1307 .pll = PLL_28, 1308 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, 1309 .tuner_addr = ADDR_UNSET, 1310 }, 1311 1312 /* ---- card 0x40 ---------------------------------- */ 1313 [BTTV_BOARD_ATI_TVWONDERVE] = { 1314 /* Lukas Gebauer <geby@volny.cz> */ 1315 .name = "ATI TV-Wonder VE", 1316 .video_inputs = 2, 1317 /* .audio_inputs= 1, */ 1318 .svhs = NO_SVHS, 1319 .gpiomask = 1, 1320 .muxsel = MUXSEL(2, 3, 0, 1), 1321 .gpiomux = { 0, 0, 1, 0 }, 1322 .no_msp34xx = 1, 1323 .pll = PLL_28, 1324 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, 1325 .tuner_addr = ADDR_UNSET, 1326 }, 1327 [BTTV_BOARD_FLYVIDEO2000] = { 1328 /* DeeJay <deejay@westel900.net (2000S) */ 1329 .name = "Lifeview FlyVideo 2000S LR90", 1330 .video_inputs = 3, 1331 /* .audio_inputs= 3, */ 1332 .svhs = 2, 1333 .gpiomask = 0x18e0, 1334 .muxsel = MUXSEL(2, 3, 0, 1), 1335 /* Radio changed from 1e80 to 0x800 to make 1336 FlyVideo2000S in .hu happy (gm)*/ 1337 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */ 1338 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, 1339 .gpiomute = 0x1800, 1340 .audio_mode_gpio= fv2000s_audio, 1341 .no_msp34xx = 1, 1342 .pll = PLL_28, 1343 .tuner_type = TUNER_PHILIPS_PAL, 1344 .tuner_addr = ADDR_UNSET, 1345 }, 1346 [BTTV_BOARD_TERRATVALUER] = { 1347 .name = "Terratec TValueRadio", 1348 .video_inputs = 3, 1349 /* .audio_inputs= 1, */ 1350 .svhs = 2, 1351 .gpiomask = 0xffff00, 1352 .muxsel = MUXSEL(2, 3, 1, 1), 1353 .gpiomux = { 0x500, 0x500, 0x300, 0x900 }, 1354 .gpiomute = 0x900, 1355 .pll = PLL_28, 1356 .tuner_type = TUNER_PHILIPS_PAL, 1357 .tuner_addr = ADDR_UNSET, 1358 .has_radio = 1, 1359 }, 1360 [BTTV_BOARD_GVBCTV4PCI] = { 1361 /* TANAKA Kei <peg00625@nifty.com> */ 1362 .name = "IODATA GV-BCTV4/PCI", 1363 .video_inputs = 3, 1364 /* .audio_inputs= 1, */ 1365 .svhs = 2, 1366 .gpiomask = 0x010f00, 1367 .muxsel = MUXSEL(2, 3, 0, 0), 1368 .gpiomux = {0x10000, 0, 0x10000, 0 }, 1369 .no_msp34xx = 1, 1370 .pll = PLL_28, 1371 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, 1372 .tuner_addr = ADDR_UNSET, 1373 .audio_mode_gpio= gvbctv3pci_audio, 1374 }, 1375 1376 /* ---- card 0x44 ---------------------------------- */ 1377 [BTTV_BOARD_VOODOOTV_FM] = { 1378 .name = "3Dfx VoodooTV FM (Euro)", 1379 /* try "insmod msp3400 simple=0" if you have 1380 * sound problems with this card. */ 1381 .video_inputs = 4, 1382 /* .audio_inputs= 1, */ 1383 .svhs = NO_SVHS, 1384 .gpiomask = 0x4f8a00, 1385 /* 0x100000: 1=MSP enabled (0=disable again) 1386 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ 1387 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, 1388 .gpiomute = 0x947fff, 1389 /* tvtuner, radio, external,internal, mute, stereo 1390 * tuner, Composit, SVid, Composit-on-Svid-adapter */ 1391 .muxsel = MUXSEL(2, 3, 0, 1), 1392 .tuner_type = TUNER_MT2032, 1393 .tuner_addr = ADDR_UNSET, 1394 .pll = PLL_28, 1395 .has_radio = 1, 1396 }, 1397 [BTTV_BOARD_VOODOOTV_200] = { 1398 .name = "VoodooTV 200 (USA)", 1399 /* try "insmod msp3400 simple=0" if you have 1400 * sound problems with this card. */ 1401 .video_inputs = 4, 1402 /* .audio_inputs= 1, */ 1403 .svhs = NO_SVHS, 1404 .gpiomask = 0x4f8a00, 1405 /* 0x100000: 1=MSP enabled (0=disable again) 1406 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ 1407 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, 1408 .gpiomute = 0x947fff, 1409 /* tvtuner, radio, external,internal, mute, stereo 1410 * tuner, Composit, SVid, Composit-on-Svid-adapter */ 1411 .muxsel = MUXSEL(2, 3, 0, 1), 1412 .tuner_type = TUNER_MT2032, 1413 .tuner_addr = ADDR_UNSET, 1414 .pll = PLL_28, 1415 .has_radio = 1, 1416 }, 1417 [BTTV_BOARD_AIMMS] = { 1418 /* Philip Blundell <pb@nexus.co.uk> */ 1419 .name = "Active Imaging AIMMS", 1420 .video_inputs = 1, 1421 /* .audio_inputs= 0, */ 1422 .tuner_type = TUNER_ABSENT, 1423 .tuner_addr = ADDR_UNSET, 1424 .pll = PLL_28, 1425 .muxsel = MUXSEL(2), 1426 .gpiomask = 0 1427 }, 1428 [BTTV_BOARD_PV_BT878P_PLUS] = { 1429 /* Tomasz Pyra <hellfire@sedez.iq.pl> */ 1430 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)", 1431 .video_inputs = 3, 1432 /* .audio_inputs= 4, */ 1433 .svhs = 2, 1434 .gpiomask = 15, 1435 .muxsel = MUXSEL(2, 3, 1, 1), 1436 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */ 1437 .gpiomute = 13, 1438 .pll = PLL_28, 1439 .tuner_type = TUNER_LG_PAL_I_FM, 1440 .tuner_addr = ADDR_UNSET, 1441 .has_remote = 1, 1442 /* GPIO wiring: 1443 GPIO0: U4.A0 (hef4052bt) 1444 GPIO1: U4.A1 1445 GPIO2: U4.A1 (second hef4052bt) 1446 GPIO3: U4.nEN, U5.A0, A5.nEN 1447 GPIO8-15: vrd866b ? 1448 */ 1449 }, 1450 [BTTV_BOARD_FLYVIDEO98EZ] = { 1451 .name = "Lifeview FlyVideo 98EZ (capture only) LR51", 1452 .video_inputs = 4, 1453 /* .audio_inputs= 0, */ 1454 .svhs = 2, 1455 /* AV1, AV2, SVHS, CVid adapter on SVHS */ 1456 .muxsel = MUXSEL(2, 3, 1, 1), 1457 .pll = PLL_28, 1458 .no_msp34xx = 1, 1459 .tuner_type = TUNER_ABSENT, 1460 .tuner_addr = ADDR_UNSET, 1461 }, 1462 1463 /* ---- card 0x48 ---------------------------------- */ 1464 [BTTV_BOARD_PV_BT878P_9B] = { 1465 /* Dariusz Kowalewski <darekk@automex.pl> */ 1466 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)", 1467 .video_inputs = 4, 1468 /* .audio_inputs= 1, */ 1469 .svhs = 2, 1470 .gpiomask = 0x3f, 1471 .muxsel = MUXSEL(2, 3, 1, 1), 1472 .gpiomux = { 0x01, 0x00, 0x03, 0x03 }, 1473 .gpiomute = 0x09, 1474 .no_msp34xx = 1, 1475 .pll = PLL_28, 1476 .tuner_type = TUNER_PHILIPS_PAL, 1477 .tuner_addr = ADDR_UNSET, 1478 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */ 1479 .has_radio = 1, /* Note: not all cards have radio */ 1480 .has_remote = 1, 1481 /* GPIO wiring: 1482 GPIO0: A0 hef4052 1483 GPIO1: A1 hef4052 1484 GPIO3: nEN hef4052 1485 GPIO8-15: vrd866b 1486 GPIO20,22,23: R30,R29,R28 1487 */ 1488 }, 1489 [BTTV_BOARD_SENSORAY311_611] = { 1490 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */ 1491 /* you must jumper JP5 for the 311 card (PC/104+) to work */ 1492 .name = "Sensoray 311/611", 1493 .video_inputs = 5, 1494 /* .audio_inputs= 0, */ 1495 .svhs = 4, 1496 .gpiomask = 0, 1497 .muxsel = MUXSEL(2, 3, 1, 0, 0), 1498 .gpiomux = { 0 }, 1499 .tuner_type = TUNER_ABSENT, 1500 .tuner_addr = ADDR_UNSET, 1501 }, 1502 [BTTV_BOARD_RV605] = { 1503 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */ 1504 .name = "RemoteVision MX (RV605)", 1505 .video_inputs = 16, 1506 /* .audio_inputs= 0, */ 1507 .svhs = NO_SVHS, 1508 .gpiomask = 0x00, 1509 .gpiomask2 = 0x07ff, 1510 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 1511 .no_msp34xx = 1, 1512 .tuner_type = TUNER_ABSENT, 1513 .tuner_addr = ADDR_UNSET, 1514 .muxsel_hook = rv605_muxsel, 1515 }, 1516 [BTTV_BOARD_POWERCLR_MTV878] = { 1517 .name = "Powercolor MTV878/ MTV878R/ MTV878F", 1518 .video_inputs = 3, 1519 /* .audio_inputs= 2, */ 1520 .svhs = 2, 1521 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ 1522 .muxsel = MUXSEL(2, 1, 1), 1523 .gpiomux = { 0, 1, 2, 2 }, 1524 .gpiomute = 4, 1525 .tuner_type = TUNER_PHILIPS_PAL, 1526 .tuner_addr = ADDR_UNSET, 1527 .pll = PLL_28, 1528 .has_radio = 1, 1529 }, 1530 1531 /* ---- card 0x4c ---------------------------------- */ 1532 [BTTV_BOARD_WINDVR] = { 1533 /* Masaki Suzuki <masaki@btree.org> */ 1534 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)", 1535 .video_inputs = 3, 1536 /* .audio_inputs= 1, */ 1537 .svhs = 2, 1538 .gpiomask = 0x140007, 1539 .muxsel = MUXSEL(2, 3, 1, 1), 1540 .gpiomux = { 0, 1, 2, 3 }, 1541 .gpiomute = 4, 1542 .tuner_type = TUNER_PHILIPS_NTSC, 1543 .tuner_addr = ADDR_UNSET, 1544 .audio_mode_gpio= windvr_audio, 1545 }, 1546 [BTTV_BOARD_GRANDTEC_MULTI] = { 1547 .name = "GrandTec Multi Capture Card (Bt878)", 1548 .video_inputs = 4, 1549 /* .audio_inputs= 0, */ 1550 .svhs = NO_SVHS, 1551 .gpiomask = 0, 1552 .muxsel = MUXSEL(2, 3, 1, 0), 1553 .gpiomux = { 0 }, 1554 .no_msp34xx = 1, 1555 .pll = PLL_28, 1556 .tuner_type = TUNER_ABSENT, 1557 .tuner_addr = ADDR_UNSET, 1558 }, 1559 [BTTV_BOARD_KWORLD] = { 1560 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF", 1561 .video_inputs = 4, 1562 /* .audio_inputs= 3, */ 1563 .svhs = 2, 1564 .gpiomask = 7, 1565 /* Tuner, SVid, SVHS, SVid to SVHS connector */ 1566 .muxsel = MUXSEL(2, 3, 1, 1), 1567 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio! 1568 * This card lacks external Audio In, so we mute it on Ext. & Int. 1569 * The PCB can take a sbx1637/sbx1673, wiring unknown. 1570 * This card lacks PCI subsystem ID, sigh. 1571 * gpiomux =1: lower volume, 2+3: mute 1572 * btwincap uses 0x80000/0x80003 1573 */ 1574 .gpiomute = 4, 1575 .no_msp34xx = 1, 1576 .pll = PLL_28, 1577 .tuner_type = TUNER_PHILIPS_PAL, 1578 .tuner_addr = ADDR_UNSET, 1579 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and 1580 radio signal strength indicators work fine. */ 1581 .has_radio = 1, 1582 /* GPIO Info: 1583 GPIO0,1: HEF4052 A0,A1 1584 GPIO2: HEF4052 nENABLE 1585 GPIO3-7: n.c. 1586 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card] 1587 GPIO14,15: ?? 1588 GPIO16-21: n.c. 1589 GPIO22,23: ?? 1590 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/ 1591 }, 1592 [BTTV_BOARD_DSP_TCVIDEO] = { 1593 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */ 1594 .name = "DSP Design TCVIDEO", 1595 .video_inputs = 4, 1596 .svhs = NO_SVHS, 1597 .muxsel = MUXSEL(2, 3, 1, 0), 1598 .pll = PLL_28, 1599 .tuner_type = UNSET, 1600 .tuner_addr = ADDR_UNSET, 1601 }, 1602 1603 /* ---- card 0x50 ---------------------------------- */ 1604 [BTTV_BOARD_HAUPPAUGEPVR] = { 1605 .name = "Hauppauge WinTV PVR", 1606 .video_inputs = 4, 1607 /* .audio_inputs= 1, */ 1608 .svhs = 2, 1609 .muxsel = MUXSEL(2, 0, 1, 1), 1610 .pll = PLL_28, 1611 .tuner_type = UNSET, 1612 .tuner_addr = ADDR_UNSET, 1613 1614 .gpiomask = 7, 1615 .gpiomux = {7}, 1616 }, 1617 [BTTV_BOARD_GVBCTV5PCI] = { 1618 .name = "IODATA GV-BCTV5/PCI", 1619 .video_inputs = 3, 1620 /* .audio_inputs= 1, */ 1621 .svhs = 2, 1622 .gpiomask = 0x0f0f80, 1623 .muxsel = MUXSEL(2, 3, 1, 0), 1624 .gpiomux = {0x030000, 0x010000, 0, 0 }, 1625 .gpiomute = 0x020000, 1626 .no_msp34xx = 1, 1627 .pll = PLL_28, 1628 .tuner_type = TUNER_PHILIPS_NTSC_M, 1629 .tuner_addr = ADDR_UNSET, 1630 .audio_mode_gpio= gvbctv5pci_audio, 1631 .has_radio = 1, 1632 }, 1633 [BTTV_BOARD_OSPREY1x0] = { 1634 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */ 1635 .video_inputs = 4, /* id-inputs-clock */ 1636 /* .audio_inputs= 0, */ 1637 .svhs = 3, 1638 .muxsel = MUXSEL(3, 2, 0, 1), 1639 .pll = PLL_28, 1640 .tuner_type = TUNER_ABSENT, 1641 .tuner_addr = ADDR_UNSET, 1642 .no_msp34xx = 1, 1643 .no_tda7432 = 1, 1644 }, 1645 [BTTV_BOARD_OSPREY1x0_848] = { 1646 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */ 1647 .video_inputs = 3, 1648 /* .audio_inputs= 0, */ 1649 .svhs = 2, 1650 .muxsel = MUXSEL(2, 3, 1), 1651 .pll = PLL_28, 1652 .tuner_type = TUNER_ABSENT, 1653 .tuner_addr = ADDR_UNSET, 1654 .no_msp34xx = 1, 1655 .no_tda7432 = 1, 1656 }, 1657 1658 /* ---- card 0x54 ---------------------------------- */ 1659 [BTTV_BOARD_OSPREY101_848] = { 1660 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */ 1661 .video_inputs = 2, 1662 /* .audio_inputs= 0, */ 1663 .svhs = 1, 1664 .muxsel = MUXSEL(3, 1), 1665 .pll = PLL_28, 1666 .tuner_type = TUNER_ABSENT, 1667 .tuner_addr = ADDR_UNSET, 1668 .no_msp34xx = 1, 1669 .no_tda7432 = 1, 1670 }, 1671 [BTTV_BOARD_OSPREY1x1] = { 1672 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */ 1673 .video_inputs = 1, 1674 /* .audio_inputs= 0, */ 1675 .svhs = NO_SVHS, 1676 .muxsel = MUXSEL(0), 1677 .pll = PLL_28, 1678 .tuner_type = TUNER_ABSENT, 1679 .tuner_addr = ADDR_UNSET, 1680 .no_msp34xx = 1, 1681 .no_tda7432 = 1, 1682 }, 1683 [BTTV_BOARD_OSPREY1x1_SVID] = { 1684 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */ 1685 .video_inputs = 2, 1686 /* .audio_inputs= 0, */ 1687 .svhs = 1, 1688 .muxsel = MUXSEL(0, 1), 1689 .pll = PLL_28, 1690 .tuner_type = TUNER_ABSENT, 1691 .tuner_addr = ADDR_UNSET, 1692 .no_msp34xx = 1, 1693 .no_tda7432 = 1, 1694 }, 1695 [BTTV_BOARD_OSPREY2xx] = { 1696 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */ 1697 .video_inputs = 1, 1698 /* .audio_inputs= 1, */ 1699 .svhs = NO_SVHS, 1700 .muxsel = MUXSEL(0), 1701 .pll = PLL_28, 1702 .tuner_type = TUNER_ABSENT, 1703 .tuner_addr = ADDR_UNSET, 1704 .no_msp34xx = 1, 1705 .no_tda7432 = 1, 1706 }, 1707 1708 /* ---- card 0x58 ---------------------------------- */ 1709 [BTTV_BOARD_OSPREY2x0_SVID] = { 1710 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */ 1711 .video_inputs = 2, 1712 /* .audio_inputs= 1, */ 1713 .svhs = 1, 1714 .muxsel = MUXSEL(0, 1), 1715 .pll = PLL_28, 1716 .tuner_type = TUNER_ABSENT, 1717 .tuner_addr = ADDR_UNSET, 1718 .no_msp34xx = 1, 1719 .no_tda7432 = 1, 1720 }, 1721 [BTTV_BOARD_OSPREY2x0] = { 1722 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */ 1723 .video_inputs = 2, 1724 /* .audio_inputs= 1, */ 1725 .svhs = 1, 1726 .muxsel = MUXSEL(2, 3), 1727 .pll = PLL_28, 1728 .tuner_type = TUNER_ABSENT, 1729 .tuner_addr = ADDR_UNSET, 1730 .no_msp34xx = 1, 1731 .no_tda7432 = 1, 1732 }, 1733 [BTTV_BOARD_OSPREY500] = { 1734 .name = "Osprey 500", /* 500 */ 1735 .video_inputs = 2, 1736 /* .audio_inputs= 1, */ 1737 .svhs = 1, 1738 .muxsel = MUXSEL(2, 3), 1739 .pll = PLL_28, 1740 .tuner_type = TUNER_ABSENT, 1741 .tuner_addr = ADDR_UNSET, 1742 .no_msp34xx = 1, 1743 .no_tda7432 = 1, 1744 }, 1745 [BTTV_BOARD_OSPREY540] = { 1746 .name = "Osprey 540", /* 540 */ 1747 .video_inputs = 4, 1748 /* .audio_inputs= 1, */ 1749 .pll = PLL_28, 1750 .tuner_type = TUNER_ABSENT, 1751 .tuner_addr = ADDR_UNSET, 1752 .no_msp34xx = 1, 1753 .no_tda7432 = 1, 1754 }, 1755 1756 /* ---- card 0x5C ---------------------------------- */ 1757 [BTTV_BOARD_OSPREY2000] = { 1758 .name = "Osprey 2000", /* 2000 */ 1759 .video_inputs = 2, 1760 /* .audio_inputs= 1, */ 1761 .svhs = 1, 1762 .muxsel = MUXSEL(2, 3), 1763 .pll = PLL_28, 1764 .tuner_type = TUNER_ABSENT, 1765 .tuner_addr = ADDR_UNSET, 1766 .no_msp34xx = 1, 1767 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ 1768 }, 1769 [BTTV_BOARD_IDS_EAGLE] = { 1770 /* M G Berberich <berberic@forwiss.uni-passau.de> */ 1771 .name = "IDS Eagle", 1772 .video_inputs = 4, 1773 /* .audio_inputs= 0, */ 1774 .tuner_type = TUNER_ABSENT, 1775 .tuner_addr = ADDR_UNSET, 1776 .svhs = NO_SVHS, 1777 .gpiomask = 0, 1778 .muxsel = MUXSEL(2, 2, 2, 2), 1779 .muxsel_hook = eagle_muxsel, 1780 .no_msp34xx = 1, 1781 .pll = PLL_28, 1782 }, 1783 [BTTV_BOARD_PINNACLESAT] = { 1784 .name = "Pinnacle PCTV Sat", 1785 .video_inputs = 2, 1786 /* .audio_inputs= 0, */ 1787 .svhs = 1, 1788 .tuner_type = TUNER_ABSENT, 1789 .tuner_addr = ADDR_UNSET, 1790 .no_msp34xx = 1, 1791 .no_tda7432 = 1, 1792 .muxsel = MUXSEL(3, 1), 1793 .pll = PLL_28, 1794 .no_gpioirq = 1, 1795 .has_dvb = 1, 1796 }, 1797 [BTTV_BOARD_FORMAC_PROTV] = { 1798 .name = "Formac ProTV II (bt878)", 1799 .video_inputs = 4, 1800 /* .audio_inputs= 1, */ 1801 .svhs = 3, 1802 .gpiomask = 2, 1803 /* TV, Comp1, Composite over SVID con, SVID */ 1804 .muxsel = MUXSEL(2, 3, 1, 1), 1805 .gpiomux = { 2, 2, 0, 0 }, 1806 .pll = PLL_28, 1807 .has_radio = 1, 1808 .tuner_type = TUNER_PHILIPS_PAL, 1809 .tuner_addr = ADDR_UNSET, 1810 /* sound routing: 1811 GPIO=0x00,0x01,0x03: mute (?) 1812 0x02: both TV and radio (tuner: FM1216/I) 1813 The card has onboard audio connectors labeled "cdrom" and "board", 1814 not soldered here, though unknown wiring. 1815 Card lacks: external audio in, pci subsystem id. 1816 */ 1817 }, 1818 1819 /* ---- card 0x60 ---------------------------------- */ 1820 [BTTV_BOARD_MACHTV] = { 1821 .name = "MachTV", 1822 .video_inputs = 3, 1823 /* .audio_inputs= 1, */ 1824 .svhs = NO_SVHS, 1825 .gpiomask = 7, 1826 .muxsel = MUXSEL(2, 3, 1, 1), 1827 .gpiomux = { 0, 1, 2, 3}, 1828 .gpiomute = 4, 1829 .tuner_type = TUNER_PHILIPS_PAL, 1830 .tuner_addr = ADDR_UNSET, 1831 .pll = PLL_28, 1832 }, 1833 [BTTV_BOARD_EURESYS_PICOLO] = { 1834 .name = "Euresys Picolo", 1835 .video_inputs = 3, 1836 /* .audio_inputs= 0, */ 1837 .svhs = 2, 1838 .gpiomask = 0, 1839 .no_msp34xx = 1, 1840 .no_tda7432 = 1, 1841 .muxsel = MUXSEL(2, 0, 1), 1842 .pll = PLL_28, 1843 .tuner_type = TUNER_ABSENT, 1844 .tuner_addr = ADDR_UNSET, 1845 }, 1846 [BTTV_BOARD_PV150] = { 1847 /* Luc Van Hoeylandt <luc@e-magic.be> */ 1848 .name = "ProVideo PV150", /* 0x4f */ 1849 .video_inputs = 2, 1850 /* .audio_inputs= 0, */ 1851 .svhs = NO_SVHS, 1852 .gpiomask = 0, 1853 .muxsel = MUXSEL(2, 3), 1854 .gpiomux = { 0 }, 1855 .no_msp34xx = 1, 1856 .pll = PLL_28, 1857 .tuner_type = TUNER_ABSENT, 1858 .tuner_addr = ADDR_UNSET, 1859 }, 1860 [BTTV_BOARD_AD_TVK503] = { 1861 /* Hiroshi Takekawa <sian@big.or.jp> */ 1862 /* This card lacks subsystem ID */ 1863 .name = "AD-TVK503", /* 0x63 */ 1864 .video_inputs = 4, 1865 /* .audio_inputs= 1, */ 1866 .svhs = 2, 1867 .gpiomask = 0x001e8007, 1868 .muxsel = MUXSEL(2, 3, 1, 0), 1869 /* Tuner, Radio, external, internal, off, on */ 1870 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 }, 1871 .gpiomute = 0x0f, 1872 .no_msp34xx = 1, 1873 .pll = PLL_28, 1874 .tuner_type = TUNER_PHILIPS_NTSC, 1875 .tuner_addr = ADDR_UNSET, 1876 .audio_mode_gpio= adtvk503_audio, 1877 }, 1878 1879 /* ---- card 0x64 ---------------------------------- */ 1880 [BTTV_BOARD_HERCULES_SM_TV] = { 1881 .name = "Hercules Smart TV Stereo", 1882 .video_inputs = 4, 1883 /* .audio_inputs= 1, */ 1884 .svhs = 2, 1885 .gpiomask = 0x00, 1886 .muxsel = MUXSEL(2, 3, 1, 1), 1887 .no_msp34xx = 1, 1888 .pll = PLL_28, 1889 .tuner_type = TUNER_PHILIPS_PAL, 1890 .tuner_addr = ADDR_UNSET, 1891 /* Notes: 1892 - card lacks subsystem ID 1893 - stereo variant w/ daughter board with tda9874a @0xb0 1894 - Audio Routing: 1895 always from tda9874 independent of GPIO (?) 1896 external line in: unknown 1897 - Other chips: em78p156elp @ 0x96 (probably IR remote control) 1898 hef4053 (instead 4052) for unknown function 1899 */ 1900 }, 1901 [BTTV_BOARD_PACETV] = { 1902 .name = "Pace TV & Radio Card", 1903 .video_inputs = 4, 1904 /* .audio_inputs= 1, */ 1905 .svhs = 2, 1906 /* Tuner, CVid, SVid, CVid over SVid connector */ 1907 .muxsel = MUXSEL(2, 3, 1, 1), 1908 .gpiomask = 0, 1909 .no_tda7432 = 1, 1910 .tuner_type = TUNER_PHILIPS_PAL_I, 1911 .tuner_addr = ADDR_UNSET, 1912 .has_radio = 1, 1913 .pll = PLL_28, 1914 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id 1915 only internal line out: (4pin header) RGGL 1916 Radio must be decoded by msp3410d (not routed through)*/ 1917 /* 1918 .digital_mode = DIGITAL_MODE_CAMERA, todo! 1919 */ 1920 }, 1921 [BTTV_BOARD_IVC200] = { 1922 /* Chris Willing <chris@vislab.usyd.edu.au> */ 1923 .name = "IVC-200", 1924 .video_inputs = 1, 1925 /* .audio_inputs= 0, */ 1926 .tuner_type = TUNER_ABSENT, 1927 .tuner_addr = ADDR_UNSET, 1928 .svhs = NO_SVHS, 1929 .gpiomask = 0xdf, 1930 .muxsel = MUXSEL(2), 1931 .pll = PLL_28, 1932 }, 1933 [BTTV_BOARD_IVCE8784] = { 1934 .name = "IVCE-8784", 1935 .video_inputs = 1, 1936 /* .audio_inputs= 0, */ 1937 .tuner_type = TUNER_ABSENT, 1938 .tuner_addr = ADDR_UNSET, 1939 .svhs = NO_SVHS, 1940 .gpiomask = 0xdf, 1941 .muxsel = MUXSEL(2), 1942 .pll = PLL_28, 1943 }, 1944 [BTTV_BOARD_XGUARD] = { 1945 .name = "Grand X-Guard / Trust 814PCI", 1946 .video_inputs = 16, 1947 /* .audio_inputs= 0, */ 1948 .svhs = NO_SVHS, 1949 .tuner_type = TUNER_ABSENT, 1950 .tuner_addr = ADDR_UNSET, 1951 .gpiomask2 = 0xff, 1952 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0), 1953 .muxsel_hook = xguard_muxsel, 1954 .no_msp34xx = 1, 1955 .no_tda7432 = 1, 1956 .pll = PLL_28, 1957 }, 1958 1959 /* ---- card 0x68 ---------------------------------- */ 1960 [BTTV_BOARD_NEBULA_DIGITV] = { 1961 .name = "Nebula Electronics DigiTV", 1962 .video_inputs = 1, 1963 .svhs = NO_SVHS, 1964 .muxsel = MUXSEL(2, 3, 1, 0), 1965 .no_msp34xx = 1, 1966 .no_tda7432 = 1, 1967 .pll = PLL_28, 1968 .tuner_type = TUNER_ABSENT, 1969 .tuner_addr = ADDR_UNSET, 1970 .has_dvb = 1, 1971 .has_remote = 1, 1972 .gpiomask = 0x1b, 1973 .no_gpioirq = 1, 1974 }, 1975 [BTTV_BOARD_PV143] = { 1976 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */ 1977 .name = "ProVideo PV143", 1978 .video_inputs = 4, 1979 /* .audio_inputs= 0, */ 1980 .svhs = NO_SVHS, 1981 .gpiomask = 0, 1982 .muxsel = MUXSEL(2, 3, 1, 0), 1983 .gpiomux = { 0 }, 1984 .no_msp34xx = 1, 1985 .pll = PLL_28, 1986 .tuner_type = TUNER_ABSENT, 1987 .tuner_addr = ADDR_UNSET, 1988 }, 1989 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = { 1990 /* M.Klahr@phytec.de */ 1991 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)", 1992 .video_inputs = 4, 1993 /* .audio_inputs= 0, */ 1994 .svhs = 3, 1995 .gpiomask = 0x00, 1996 .muxsel = MUXSEL(2, 3, 1, 0), 1997 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 1998 .pll = PLL_28, 1999 .tuner_type = TUNER_ABSENT, 2000 .tuner_addr = ADDR_UNSET, 2001 }, 2002 [BTTV_BOARD_VD009X1_VD011_COMBI] = { 2003 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)", 2004 .video_inputs = 4, 2005 /* .audio_inputs= 0, */ 2006 .svhs = 3, 2007 .gpiomask = 0x00, 2008 .muxsel = MUXSEL(2, 3, 1, 1), 2009 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2010 .pll = PLL_28, 2011 .tuner_type = TUNER_ABSENT, 2012 .tuner_addr = ADDR_UNSET, 2013 }, 2014 2015 /* ---- card 0x6c ---------------------------------- */ 2016 [BTTV_BOARD_VD009_MINIDIN] = { 2017 .name = "PHYTEC VD-009 MiniDIN (bt878)", 2018 .video_inputs = 10, 2019 /* .audio_inputs= 0, */ 2020 .svhs = 9, 2021 .gpiomask = 0x00, 2022 .gpiomask2 = 0x03, /* used for external vodeo mux */ 2023 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0), 2024 .muxsel_hook = phytec_muxsel, 2025 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2026 .pll = PLL_28, 2027 .tuner_type = TUNER_ABSENT, 2028 .tuner_addr = ADDR_UNSET, 2029 }, 2030 [BTTV_BOARD_VD009_COMBI] = { 2031 .name = "PHYTEC VD-009 Combi (bt878)", 2032 .video_inputs = 10, 2033 /* .audio_inputs= 0, */ 2034 .svhs = 9, 2035 .gpiomask = 0x00, 2036 .gpiomask2 = 0x03, /* used for external vodeo mux */ 2037 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), 2038 .muxsel_hook = phytec_muxsel, 2039 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2040 .pll = PLL_28, 2041 .tuner_type = TUNER_ABSENT, 2042 .tuner_addr = ADDR_UNSET, 2043 }, 2044 [BTTV_BOARD_IVC100] = { 2045 .name = "IVC-100", 2046 .video_inputs = 4, 2047 /* .audio_inputs= 0, */ 2048 .tuner_type = TUNER_ABSENT, 2049 .tuner_addr = ADDR_UNSET, 2050 .svhs = NO_SVHS, 2051 .gpiomask = 0xdf, 2052 .muxsel = MUXSEL(2, 3, 1, 0), 2053 .pll = PLL_28, 2054 }, 2055 [BTTV_BOARD_IVC120] = { 2056 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */ 2057 .name = "IVC-120G", 2058 .video_inputs = 16, 2059 /* .audio_inputs= 0, */ 2060 .tuner_type = TUNER_ABSENT, 2061 .tuner_addr = ADDR_UNSET, 2062 .svhs = NO_SVHS, /* card has no svhs */ 2063 .no_msp34xx = 1, 2064 .no_tda7432 = 1, 2065 .gpiomask = 0x00, 2066 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), 2067 .muxsel_hook = ivc120_muxsel, 2068 .pll = PLL_28, 2069 }, 2070 2071 /* ---- card 0x70 ---------------------------------- */ 2072 [BTTV_BOARD_PC_HDTV] = { 2073 .name = "pcHDTV HD-2000 TV", 2074 .video_inputs = 4, 2075 /* .audio_inputs= 1, */ 2076 .svhs = 2, 2077 .muxsel = MUXSEL(2, 3, 1, 0), 2078 .tuner_type = TUNER_PHILIPS_FCV1236D, 2079 .tuner_addr = ADDR_UNSET, 2080 .has_dvb = 1, 2081 }, 2082 [BTTV_BOARD_TWINHAN_DST] = { 2083 .name = "Twinhan DST + clones", 2084 .no_msp34xx = 1, 2085 .no_tda7432 = 1, 2086 .tuner_type = TUNER_ABSENT, 2087 .tuner_addr = ADDR_UNSET, 2088 .no_video = 1, 2089 .has_dvb = 1, 2090 }, 2091 [BTTV_BOARD_WINFASTVC100] = { 2092 .name = "Winfast VC100", 2093 .video_inputs = 3, 2094 /* .audio_inputs= 0, */ 2095 .svhs = 1, 2096 /* Vid In, SVid In, Vid over SVid in connector */ 2097 .muxsel = MUXSEL(3, 1, 1, 3), 2098 .no_msp34xx = 1, 2099 .no_tda7432 = 1, 2100 .tuner_type = TUNER_ABSENT, 2101 .tuner_addr = ADDR_UNSET, 2102 .pll = PLL_28, 2103 }, 2104 [BTTV_BOARD_TEV560] = { 2105 .name = "Teppro TEV-560/InterVision IV-560", 2106 .video_inputs = 3, 2107 /* .audio_inputs= 1, */ 2108 .svhs = 2, 2109 .gpiomask = 3, 2110 .muxsel = MUXSEL(2, 3, 1, 1), 2111 .gpiomux = { 1, 1, 1, 1 }, 2112 .tuner_type = TUNER_PHILIPS_PAL, 2113 .tuner_addr = ADDR_UNSET, 2114 .pll = PLL_35, 2115 }, 2116 2117 /* ---- card 0x74 ---------------------------------- */ 2118 [BTTV_BOARD_SIMUS_GVC1100] = { 2119 .name = "SIMUS GVC1100", 2120 .video_inputs = 4, 2121 /* .audio_inputs= 0, */ 2122 .svhs = NO_SVHS, 2123 .tuner_type = TUNER_ABSENT, 2124 .tuner_addr = ADDR_UNSET, 2125 .pll = PLL_28, 2126 .muxsel = MUXSEL(2, 2, 2, 2), 2127 .gpiomask = 0x3F, 2128 .muxsel_hook = gvc1100_muxsel, 2129 }, 2130 [BTTV_BOARD_NGSTV_PLUS] = { 2131 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */ 2132 .name = "NGS NGSTV+", 2133 .video_inputs = 3, 2134 .svhs = 2, 2135 .gpiomask = 0x008007, 2136 .muxsel = MUXSEL(2, 3, 0, 0), 2137 .gpiomux = { 0, 0, 0, 0 }, 2138 .gpiomute = 0x000003, 2139 .pll = PLL_28, 2140 .tuner_type = TUNER_PHILIPS_PAL, 2141 .tuner_addr = ADDR_UNSET, 2142 .has_remote = 1, 2143 }, 2144 [BTTV_BOARD_LMLBT4] = { 2145 /* http://linuxmedialabs.com */ 2146 .name = "LMLBT4", 2147 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */ 2148 /* .audio_inputs= 0, */ 2149 .svhs = NO_SVHS, 2150 .muxsel = MUXSEL(2, 3, 1, 0), 2151 .no_msp34xx = 1, 2152 .no_tda7432 = 1, 2153 .tuner_type = TUNER_ABSENT, 2154 .tuner_addr = ADDR_UNSET, 2155 }, 2156 [BTTV_BOARD_TEKRAM_M205] = { 2157 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */ 2158 .name = "Tekram M205 PRO", 2159 .video_inputs = 3, 2160 /* .audio_inputs= 1, */ 2161 .tuner_type = TUNER_PHILIPS_PAL, 2162 .tuner_addr = ADDR_UNSET, 2163 .svhs = 2, 2164 .gpiomask = 0x68, 2165 .muxsel = MUXSEL(2, 3, 1), 2166 .gpiomux = { 0x68, 0x68, 0x61, 0x61 }, 2167 .pll = PLL_28, 2168 }, 2169 2170 /* ---- card 0x78 ---------------------------------- */ 2171 [BTTV_BOARD_CONTVFMI] = { 2172 /* Javier Cendan Ares <jcendan@lycos.es> */ 2173 /* bt878 TV + FM without subsystem ID */ 2174 .name = "Conceptronic CONTVFMi", 2175 .video_inputs = 3, 2176 /* .audio_inputs= 1, */ 2177 .svhs = 2, 2178 .gpiomask = 0x008007, 2179 .muxsel = MUXSEL(2, 3, 1, 1), 2180 .gpiomux = { 0, 1, 2, 2 }, 2181 .gpiomute = 3, 2182 .pll = PLL_28, 2183 .tuner_type = TUNER_PHILIPS_PAL, 2184 .tuner_addr = ADDR_UNSET, 2185 .has_remote = 1, 2186 .has_radio = 1, 2187 }, 2188 [BTTV_BOARD_PICOLO_TETRA_CHIP] = { 2189 /*Eric DEBIEF <debief@telemsa.com>*/ 2190 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/ 2191 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/ 2192 /*0x79 in bttv.h*/ 2193 .name = "Euresys Picolo Tetra", 2194 .video_inputs = 4, 2195 /* .audio_inputs= 0, */ 2196 .svhs = NO_SVHS, 2197 .gpiomask = 0, 2198 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/ 2199 .no_msp34xx = 1, 2200 .no_tda7432 = 1, 2201 /*878A input is always MUX0, see above.*/ 2202 .muxsel = MUXSEL(2, 2, 2, 2), 2203 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2204 .pll = PLL_28, 2205 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ 2206 .tuner_type = TUNER_ABSENT, 2207 .tuner_addr = ADDR_UNSET, 2208 }, 2209 [BTTV_BOARD_SPIRIT_TV] = { 2210 /* Spirit TV Tuner from http://spiritmodems.com.au */ 2211 /* Stafford Goodsell <surge@goliath.homeunix.org> */ 2212 .name = "Spirit TV Tuner", 2213 .video_inputs = 3, 2214 /* .audio_inputs= 1, */ 2215 .svhs = 2, 2216 .gpiomask = 0x0000000f, 2217 .muxsel = MUXSEL(2, 1, 1), 2218 .gpiomux = { 0x02, 0x00, 0x00, 0x00 }, 2219 .tuner_type = TUNER_TEMIC_PAL, 2220 .tuner_addr = ADDR_UNSET, 2221 .no_msp34xx = 1, 2222 }, 2223 [BTTV_BOARD_AVDVBT_771] = { 2224 /* Wolfram Joost <wojo@frokaschwei.de> */ 2225 .name = "AVerMedia AVerTV DVB-T 771", 2226 .video_inputs = 2, 2227 .svhs = 1, 2228 .tuner_type = TUNER_ABSENT, 2229 .tuner_addr = ADDR_UNSET, 2230 .muxsel = MUXSEL(3, 3), 2231 .no_msp34xx = 1, 2232 .no_tda7432 = 1, 2233 .pll = PLL_28, 2234 .has_dvb = 1, 2235 .no_gpioirq = 1, 2236 .has_remote = 1, 2237 }, 2238 /* ---- card 0x7c ---------------------------------- */ 2239 [BTTV_BOARD_AVDVBT_761] = { 2240 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */ 2241 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */ 2242 .name = "AverMedia AverTV DVB-T 761", 2243 .video_inputs = 2, 2244 .svhs = 1, 2245 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */ 2246 .no_msp34xx = 1, 2247 .no_tda7432 = 1, 2248 .pll = PLL_28, 2249 .tuner_type = TUNER_ABSENT, 2250 .tuner_addr = ADDR_UNSET, 2251 .has_dvb = 1, 2252 .no_gpioirq = 1, 2253 .has_remote = 1, 2254 }, 2255 [BTTV_BOARD_MATRIX_VISIONSQ] = { 2256 /* andre.schwarz@matrix-vision.de */ 2257 .name = "MATRIX Vision Sigma-SQ", 2258 .video_inputs = 16, 2259 /* .audio_inputs= 0, */ 2260 .svhs = NO_SVHS, 2261 .gpiomask = 0x0, 2262 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3), 2263 .muxsel_hook = sigmaSQ_muxsel, 2264 .gpiomux = { 0 }, 2265 .no_msp34xx = 1, 2266 .pll = PLL_28, 2267 .tuner_type = TUNER_ABSENT, 2268 .tuner_addr = ADDR_UNSET, 2269 }, 2270 [BTTV_BOARD_MATRIX_VISIONSLC] = { 2271 /* andre.schwarz@matrix-vision.de */ 2272 .name = "MATRIX Vision Sigma-SLC", 2273 .video_inputs = 4, 2274 /* .audio_inputs= 0, */ 2275 .svhs = NO_SVHS, 2276 .gpiomask = 0x0, 2277 .muxsel = MUXSEL(2, 2, 2, 2), 2278 .muxsel_hook = sigmaSLC_muxsel, 2279 .gpiomux = { 0 }, 2280 .no_msp34xx = 1, 2281 .pll = PLL_28, 2282 .tuner_type = TUNER_ABSENT, 2283 .tuner_addr = ADDR_UNSET, 2284 }, 2285 /* BTTV_BOARD_APAC_VIEWCOMP */ 2286 [BTTV_BOARD_APAC_VIEWCOMP] = { 2287 /* Attila Kondoros <attila.kondoros@chello.hu> */ 2288 /* bt878 TV + FM 0x00000000 subsystem ID */ 2289 .name = "APAC Viewcomp 878(AMAX)", 2290 .video_inputs = 2, 2291 /* .audio_inputs= 1, */ 2292 .svhs = NO_SVHS, 2293 .gpiomask = 0xFF, 2294 .muxsel = MUXSEL(2, 3, 1, 1), 2295 .gpiomux = { 2, 0, 0, 0 }, 2296 .gpiomute = 10, 2297 .pll = PLL_28, 2298 .tuner_type = TUNER_PHILIPS_PAL, 2299 .tuner_addr = ADDR_UNSET, 2300 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */ 2301 .has_radio = 1, /* not every card has radio */ 2302 }, 2303 2304 /* ---- card 0x80 ---------------------------------- */ 2305 [BTTV_BOARD_DVICO_DVBT_LITE] = { 2306 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */ 2307 .name = "DViCO FusionHDTV DVB-T Lite", 2308 .no_msp34xx = 1, 2309 .no_tda7432 = 1, 2310 .pll = PLL_28, 2311 .no_video = 1, 2312 .has_dvb = 1, 2313 .tuner_type = TUNER_ABSENT, 2314 .tuner_addr = ADDR_UNSET, 2315 }, 2316 [BTTV_BOARD_VGEAR_MYVCD] = { 2317 /* Steven <photon38@pchome.com.tw> */ 2318 .name = "V-Gear MyVCD", 2319 .video_inputs = 3, 2320 /* .audio_inputs= 1, */ 2321 .svhs = 2, 2322 .gpiomask = 0x3f, 2323 .muxsel = MUXSEL(2, 3, 1, 0), 2324 .gpiomux = {0x31, 0x31, 0x31, 0x31 }, 2325 .gpiomute = 0x31, 2326 .no_msp34xx = 1, 2327 .pll = PLL_28, 2328 .tuner_type = TUNER_PHILIPS_NTSC_M, 2329 .tuner_addr = ADDR_UNSET, 2330 .has_radio = 0, 2331 }, 2332 [BTTV_BOARD_SUPER_TV] = { 2333 /* Rick C <cryptdragoon@gmail.com> */ 2334 .name = "Super TV Tuner", 2335 .video_inputs = 4, 2336 /* .audio_inputs= 1, */ 2337 .svhs = 2, 2338 .muxsel = MUXSEL(2, 3, 1, 0), 2339 .tuner_type = TUNER_PHILIPS_NTSC, 2340 .tuner_addr = ADDR_UNSET, 2341 .gpiomask = 0x008007, 2342 .gpiomux = { 0, 0x000001,0,0 }, 2343 .has_radio = 1, 2344 }, 2345 [BTTV_BOARD_TIBET_CS16] = { 2346 /* Chris Fanning <video4linux@haydon.net> */ 2347 .name = "Tibet Systems 'Progress DVR' CS16", 2348 .video_inputs = 16, 2349 /* .audio_inputs= 0, */ 2350 .svhs = NO_SVHS, 2351 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2352 .pll = PLL_28, 2353 .no_msp34xx = 1, 2354 .no_tda7432 = 1, 2355 .tuner_type = TUNER_ABSENT, 2356 .tuner_addr = ADDR_UNSET, 2357 .muxsel_hook = tibetCS16_muxsel, 2358 }, 2359 [BTTV_BOARD_KODICOM_4400R] = { 2360 /* Bill Brack <wbrack@mmm.com.hk> */ 2361 /* 2362 * Note that, because of the card's wiring, the "master" 2363 * BT878A chip (i.e. the one which controls the analog switch 2364 * and must use this card type) is the 2nd one detected. The 2365 * other 3 chips should use card type 0x85, whose description 2366 * follows this one. There is a EEPROM on the card (which is 2367 * connected to the I2C of one of those other chips), but is 2368 * not currently handled. There is also a facility for a 2369 * "monitor", which is also not currently implemented. 2370 */ 2371 .name = "Kodicom 4400R (master)", 2372 .video_inputs = 16, 2373 /* .audio_inputs= 0, */ 2374 .tuner_type = TUNER_ABSENT, 2375 .tuner_addr = ADDR_UNSET, 2376 .svhs = NO_SVHS, 2377 /* GPIO bits 0-9 used for analog switch: 2378 * 00 - 03: camera selector 2379 * 04 - 06: channel (controller) selector 2380 * 07: data (1->on, 0->off) 2381 * 08: strobe 2382 * 09: reset 2383 * bit 16 is input from sync separator for the channel 2384 */ 2385 .gpiomask = 0x0003ff, 2386 .no_gpioirq = 1, 2387 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 2388 .pll = PLL_28, 2389 .no_msp34xx = 1, 2390 .no_tda7432 = 1, 2391 .muxsel_hook = kodicom4400r_muxsel, 2392 }, 2393 [BTTV_BOARD_KODICOM_4400R_SL] = { 2394 /* Bill Brack <wbrack@mmm.com.hk> */ 2395 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the 2396 * one which controls the analog switch, and must use the card type) 2397 * is the 2nd one detected. The other 3 chips should use this card 2398 * type 2399 */ 2400 .name = "Kodicom 4400R (slave)", 2401 .video_inputs = 16, 2402 /* .audio_inputs= 0, */ 2403 .tuner_type = TUNER_ABSENT, 2404 .tuner_addr = ADDR_UNSET, 2405 .svhs = NO_SVHS, 2406 .gpiomask = 0x010000, 2407 .no_gpioirq = 1, 2408 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 2409 .pll = PLL_28, 2410 .no_msp34xx = 1, 2411 .no_tda7432 = 1, 2412 .muxsel_hook = kodicom4400r_muxsel, 2413 }, 2414 /* ---- card 0x86---------------------------------- */ 2415 [BTTV_BOARD_ADLINK_RTV24] = { 2416 /* Michael Henson <mhenson@clarityvi.com> */ 2417 /* Adlink RTV24 with special unlock codes */ 2418 .name = "Adlink RTV24", 2419 .video_inputs = 4, 2420 /* .audio_inputs= 1, */ 2421 .svhs = 2, 2422 .muxsel = MUXSEL(2, 3, 1, 0), 2423 .tuner_type = UNSET, 2424 .tuner_addr = ADDR_UNSET, 2425 .pll = PLL_28, 2426 }, 2427 /* ---- card 0x87---------------------------------- */ 2428 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = { 2429 /* Michael Krufky <mkrufky@linuxtv.org> */ 2430 .name = "DViCO FusionHDTV 5 Lite", 2431 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */ 2432 .tuner_addr = ADDR_UNSET, 2433 .video_inputs = 3, 2434 /* .audio_inputs= 1, */ 2435 .svhs = 2, 2436 .muxsel = MUXSEL(2, 3, 1), 2437 .gpiomask = 0x00e00007, 2438 .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, 2439 .gpiomute = 0x00c00007, 2440 .no_msp34xx = 1, 2441 .no_tda7432 = 1, 2442 .has_dvb = 1, 2443 }, 2444 /* ---- card 0x88---------------------------------- */ 2445 [BTTV_BOARD_ACORP_Y878F] = { 2446 /* Mauro Carvalho Chehab <mchehab@infradead.org> */ 2447 .name = "Acorp Y878F", 2448 .video_inputs = 3, 2449 /* .audio_inputs= 1, */ 2450 .svhs = 2, 2451 .gpiomask = 0x01fe00, 2452 .muxsel = MUXSEL(2, 3, 1, 1), 2453 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, 2454 .gpiomute = 0x002000, 2455 .pll = PLL_28, 2456 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, 2457 .tuner_addr = 0xc1 >>1, 2458 .has_radio = 1, 2459 }, 2460 /* ---- card 0x89 ---------------------------------- */ 2461 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = { 2462 .name = "Conceptronic CTVFMi v2", 2463 .video_inputs = 3, 2464 /* .audio_inputs= 1, */ 2465 .svhs = 2, 2466 .gpiomask = 0x001c0007, 2467 .muxsel = MUXSEL(2, 3, 1, 1), 2468 .gpiomux = { 0, 1, 2, 2 }, 2469 .gpiomute = 3, 2470 .pll = PLL_28, 2471 .tuner_type = TUNER_TENA_9533_DI, 2472 .tuner_addr = ADDR_UNSET, 2473 .has_remote = 1, 2474 .has_radio = 1, 2475 }, 2476 /* ---- card 0x8a ---------------------------------- */ 2477 [BTTV_BOARD_PV_BT878P_2E] = { 2478 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)", 2479 .video_inputs = 5, 2480 /* .audio_inputs= 1, */ 2481 .svhs = 3, 2482 .has_dig_in = 1, 2483 .gpiomask = 0x01fe00, 2484 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ 2485 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 2486 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 }, 2487 .gpiomute = 0x12400, 2488 .no_msp34xx = 1, 2489 .pll = PLL_28, 2490 .tuner_type = TUNER_LG_PAL_FM, 2491 .tuner_addr = ADDR_UNSET, 2492 .has_remote = 1, 2493 }, 2494 /* ---- card 0x8b ---------------------------------- */ 2495 [BTTV_BOARD_PV_M4900] = { 2496 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */ 2497 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900", 2498 .video_inputs = 3, 2499 /* .audio_inputs= 1, */ 2500 .svhs = 2, 2501 .gpiomask = 0x3f, 2502 .muxsel = MUXSEL(2, 3, 1, 1), 2503 .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, 2504 .gpiomute = 0x29, 2505 .no_msp34xx = 1, 2506 .pll = PLL_28, 2507 .tuner_type = TUNER_YMEC_TVF_5533MF, 2508 .tuner_addr = ADDR_UNSET, 2509 .has_radio = 1, 2510 .has_remote = 1, 2511 }, 2512 /* ---- card 0x8c ---------------------------------- */ 2513 /* Has four Bt878 chips behind a PCI bridge, each chip has: 2514 one external BNC composite input (mux 2) 2515 three internal composite inputs (unknown muxes) 2516 an 18-bit stereo A/D (CS5331A), which has: 2517 one external stereo unblanced (RCA) audio connection 2518 one (or 3?) internal stereo balanced (XLR) audio connection 2519 input is selected via gpio to a 14052B mux 2520 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300) 2521 gain is controlled via an X9221A chip on the I2C bus @0x28 2522 sample rate is controlled via gpio to an MK1413S 2523 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3) 2524 There is neither a tuner nor an svideo input. */ 2525 [BTTV_BOARD_OSPREY440] = { 2526 .name = "Osprey 440", 2527 .video_inputs = 4, 2528 /* .audio_inputs= 2, */ 2529 .svhs = NO_SVHS, 2530 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */ 2531 .gpiomask = 0x303, 2532 .gpiomute = 0x000, /* int + 32kHz */ 2533 .gpiomux = { 0, 0, 0x000, 0x100}, 2534 .pll = PLL_28, 2535 .tuner_type = TUNER_ABSENT, 2536 .tuner_addr = ADDR_UNSET, 2537 .no_msp34xx = 1, 2538 .no_tda7432 = 1, 2539 }, 2540 /* ---- card 0x8d ---------------------------------- */ 2541 [BTTV_BOARD_ASOUND_SKYEYE] = { 2542 .name = "Asound Skyeye PCTV", 2543 .video_inputs = 3, 2544 /* .audio_inputs= 1, */ 2545 .svhs = 2, 2546 .gpiomask = 15, 2547 .muxsel = MUXSEL(2, 3, 1, 1), 2548 .gpiomux = { 2, 0, 0, 0 }, 2549 .gpiomute = 1, 2550 .pll = PLL_28, 2551 .tuner_type = TUNER_PHILIPS_NTSC, 2552 .tuner_addr = ADDR_UNSET, 2553 }, 2554 /* ---- card 0x8e ---------------------------------- */ 2555 [BTTV_BOARD_SABRENT_TVFM] = { 2556 .name = "Sabrent TV-FM (bttv version)", 2557 .video_inputs = 3, 2558 /* .audio_inputs= 1, */ 2559 .svhs = 2, 2560 .gpiomask = 0x108007, 2561 .muxsel = MUXSEL(2, 3, 1, 1), 2562 .gpiomux = { 100000, 100002, 100002, 100000 }, 2563 .no_msp34xx = 1, 2564 .no_tda7432 = 1, 2565 .pll = PLL_28, 2566 .tuner_type = TUNER_TNF_5335MF, 2567 .tuner_addr = ADDR_UNSET, 2568 .has_radio = 1, 2569 }, 2570 /* ---- card 0x8f ---------------------------------- */ 2571 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = { 2572 .name = "Hauppauge ImpactVCB (bt878)", 2573 .video_inputs = 4, 2574 /* .audio_inputs= 0, */ 2575 .svhs = NO_SVHS, 2576 .gpiomask = 0x0f, /* old: 7 */ 2577 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */ 2578 .no_msp34xx = 1, 2579 .no_tda7432 = 1, 2580 .tuner_type = TUNER_ABSENT, 2581 .tuner_addr = ADDR_UNSET, 2582 }, 2583 [BTTV_BOARD_MACHTV_MAGICTV] = { 2584 /* Julian Calaby <julian.calaby@gmail.com> 2585 * Slightly different from original MachTV definition (0x60) 2586 2587 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it 2588 * stuffs up remote chip. Bug is a pin on the jaecs is not set 2589 * properly (methinks) causing no keyup bits being set */ 2590 2591 .name = "MagicTV", /* rebranded MachTV */ 2592 .video_inputs = 3, 2593 /* .audio_inputs= 1, */ 2594 .svhs = 2, 2595 .gpiomask = 7, 2596 .muxsel = MUXSEL(2, 3, 1, 1), 2597 .gpiomux = { 0, 1, 2, 3 }, 2598 .gpiomute = 4, 2599 .tuner_type = TUNER_TEMIC_4009FR5_PAL, 2600 .tuner_addr = ADDR_UNSET, 2601 .pll = PLL_28, 2602 .has_radio = 1, 2603 .has_remote = 1, 2604 }, 2605 [BTTV_BOARD_SSAI_SECURITY] = { 2606 .name = "SSAI Security Video Interface", 2607 .video_inputs = 4, 2608 /* .audio_inputs= 0, */ 2609 .svhs = NO_SVHS, 2610 .muxsel = MUXSEL(0, 1, 2, 3), 2611 .tuner_type = TUNER_ABSENT, 2612 .tuner_addr = ADDR_UNSET, 2613 }, 2614 [BTTV_BOARD_SSAI_ULTRASOUND] = { 2615 .name = "SSAI Ultrasound Video Interface", 2616 .video_inputs = 2, 2617 /* .audio_inputs= 0, */ 2618 .svhs = 1, 2619 .muxsel = MUXSEL(2, 0, 1, 3), 2620 .tuner_type = TUNER_ABSENT, 2621 .tuner_addr = ADDR_UNSET, 2622 }, 2623 /* ---- card 0x94---------------------------------- */ 2624 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = { 2625 .name = "DViCO FusionHDTV 2", 2626 .tuner_type = TUNER_PHILIPS_FCV1236D, 2627 .tuner_addr = ADDR_UNSET, 2628 .video_inputs = 3, 2629 /* .audio_inputs= 1, */ 2630 .svhs = 2, 2631 .muxsel = MUXSEL(2, 3, 1), 2632 .gpiomask = 0x00e00007, 2633 .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, 2634 .gpiomute = 0x00c00007, 2635 .no_msp34xx = 1, 2636 .no_tda7432 = 1, 2637 }, 2638 /* ---- card 0x95---------------------------------- */ 2639 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = { 2640 .name = "Typhoon TV-Tuner PCI (50684)", 2641 .video_inputs = 3, 2642 /* .audio_inputs= 1, */ 2643 .svhs = 2, 2644 .gpiomask = 0x3014f, 2645 .muxsel = MUXSEL(2, 3, 1, 1), 2646 .gpiomux = { 0x20001,0x10001, 0, 0 }, 2647 .gpiomute = 10, 2648 .pll = PLL_28, 2649 .tuner_type = TUNER_PHILIPS_PAL_I, 2650 .tuner_addr = ADDR_UNSET, 2651 }, 2652 [BTTV_BOARD_GEOVISION_GV600] = { 2653 /* emhn@usb.ve */ 2654 .name = "Geovision GV-600", 2655 .video_inputs = 16, 2656 /* .audio_inputs= 0, */ 2657 .svhs = NO_SVHS, 2658 .gpiomask = 0x0, 2659 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2660 .muxsel_hook = geovision_muxsel, 2661 .gpiomux = { 0 }, 2662 .no_msp34xx = 1, 2663 .pll = PLL_28, 2664 .tuner_type = TUNER_ABSENT, 2665 .tuner_addr = ADDR_UNSET, 2666 }, 2667 [BTTV_BOARD_KOZUMI_KTV_01C] = { 2668 /* Mauro Lacy <mauro@lacy.com.ar> 2669 * Based on MagicTV and Conceptronic CONTVFMi */ 2670 2671 .name = "Kozumi KTV-01C", 2672 .video_inputs = 3, 2673 /* .audio_inputs= 1, */ 2674 .svhs = 2, 2675 .gpiomask = 0x008007, 2676 .muxsel = MUXSEL(2, 3, 1, 1), 2677 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */ 2678 .gpiomute = 3, /* CONTVFMi */ 2679 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */ 2680 .tuner_addr = ADDR_UNSET, 2681 .pll = PLL_28, 2682 .has_radio = 1, 2683 .has_remote = 1, 2684 }, 2685 [BTTV_BOARD_ENLTV_FM_2] = { 2686 /* Encore TV Tuner Pro ENL TV-FM-2 2687 Mauro Carvalho Chehab <mchehab@infradead.org */ 2688 .name = "Encore ENL TV-FM-2", 2689 .video_inputs = 3, 2690 /* .audio_inputs= 1, */ 2691 .svhs = 2, 2692 /* bit 6 -> IR disabled 2693 bit 18/17 = 00 -> mute 2694 01 -> enable external audio input 2695 10 -> internal audio input (mono?) 2696 11 -> internal audio input 2697 */ 2698 .gpiomask = 0x060040, 2699 .muxsel = MUXSEL(2, 3, 3), 2700 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 }, 2701 .gpiomute = 0, 2702 .tuner_type = TUNER_TCL_MF02GIP_5N, 2703 .tuner_addr = ADDR_UNSET, 2704 .pll = PLL_28, 2705 .has_radio = 1, 2706 .has_remote = 1, 2707 }, 2708 [BTTV_BOARD_VD012] = { 2709 /* D.Heer@Phytec.de */ 2710 .name = "PHYTEC VD-012 (bt878)", 2711 .video_inputs = 4, 2712 /* .audio_inputs= 0, */ 2713 .svhs = NO_SVHS, 2714 .gpiomask = 0x00, 2715 .muxsel = MUXSEL(0, 2, 3, 1), 2716 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2717 .pll = PLL_28, 2718 .tuner_type = TUNER_ABSENT, 2719 .tuner_addr = ADDR_UNSET, 2720 }, 2721 [BTTV_BOARD_VD012_X1] = { 2722 /* D.Heer@Phytec.de */ 2723 .name = "PHYTEC VD-012-X1 (bt878)", 2724 .video_inputs = 4, 2725 /* .audio_inputs= 0, */ 2726 .svhs = 3, 2727 .gpiomask = 0x00, 2728 .muxsel = MUXSEL(2, 3, 1), 2729 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2730 .pll = PLL_28, 2731 .tuner_type = TUNER_ABSENT, 2732 .tuner_addr = ADDR_UNSET, 2733 }, 2734 [BTTV_BOARD_VD012_X2] = { 2735 /* D.Heer@Phytec.de */ 2736 .name = "PHYTEC VD-012-X2 (bt878)", 2737 .video_inputs = 4, 2738 /* .audio_inputs= 0, */ 2739 .svhs = 3, 2740 .gpiomask = 0x00, 2741 .muxsel = MUXSEL(3, 2, 1), 2742 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2743 .pll = PLL_28, 2744 .tuner_type = TUNER_ABSENT, 2745 .tuner_addr = ADDR_UNSET, 2746 }, 2747 [BTTV_BOARD_GEOVISION_GV800S] = { 2748 /* Bruno Christo <bchristo@inf.ufsm.br> 2749 * 2750 * GeoVision GV-800(S) has 4 Conexant Fusion 878A: 2751 * 1 audio input per BT878A = 4 audio inputs 2752 * 4 video inputs per BT878A = 16 video inputs 2753 * This is the first BT878A chip of the GV-800(S). It's the 2754 * "master" chip and it controls the video inputs through an 2755 * analog multiplexer (a CD22M3494) via some GPIO pins. The 2756 * slaves should use card type 0x9e (following this one). 2757 * There is a EEPROM on the card which is currently not handled. 2758 * The audio input is not working yet. 2759 */ 2760 .name = "Geovision GV-800(S) (master)", 2761 .video_inputs = 4, 2762 /* .audio_inputs= 1, */ 2763 .tuner_type = TUNER_ABSENT, 2764 .tuner_addr = ADDR_UNSET, 2765 .svhs = NO_SVHS, 2766 .gpiomask = 0xf107f, 2767 .no_gpioirq = 1, 2768 .muxsel = MUXSEL(2, 2, 2, 2), 2769 .pll = PLL_28, 2770 .no_msp34xx = 1, 2771 .no_tda7432 = 1, 2772 .muxsel_hook = gv800s_muxsel, 2773 }, 2774 [BTTV_BOARD_GEOVISION_GV800S_SL] = { 2775 /* Bruno Christo <bchristo@inf.ufsm.br> 2776 * 2777 * GeoVision GV-800(S) has 4 Conexant Fusion 878A: 2778 * 1 audio input per BT878A = 4 audio inputs 2779 * 4 video inputs per BT878A = 16 video inputs 2780 * The 3 other BT878A chips are "slave" chips of the GV-800(S) 2781 * and should use this card type. 2782 * The audio input is not working yet. 2783 */ 2784 .name = "Geovision GV-800(S) (slave)", 2785 .video_inputs = 4, 2786 /* .audio_inputs= 1, */ 2787 .tuner_type = TUNER_ABSENT, 2788 .tuner_addr = ADDR_UNSET, 2789 .svhs = NO_SVHS, 2790 .gpiomask = 0x00, 2791 .no_gpioirq = 1, 2792 .muxsel = MUXSEL(2, 2, 2, 2), 2793 .pll = PLL_28, 2794 .no_msp34xx = 1, 2795 .no_tda7432 = 1, 2796 .muxsel_hook = gv800s_muxsel, 2797 }, 2798 [BTTV_BOARD_PV183] = { 2799 .name = "ProVideo PV183", /* 0x9f */ 2800 .video_inputs = 2, 2801 /* .audio_inputs= 0, */ 2802 .svhs = NO_SVHS, 2803 .gpiomask = 0, 2804 .muxsel = MUXSEL(2, 3), 2805 .gpiomux = { 0 }, 2806 .no_msp34xx = 1, 2807 .pll = PLL_28, 2808 .tuner_type = TUNER_ABSENT, 2809 .tuner_addr = ADDR_UNSET, 2810 }, 2811 /* ---- card 0xa0---------------------------------- */ 2812 [BTTV_BOARD_TVT_TD3116] = { 2813 .name = "Tongwei Video Technology TD-3116", 2814 .video_inputs = 16, 2815 .gpiomask = 0xc00ff, 2816 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2817 .muxsel_hook = td3116_muxsel, 2818 .svhs = NO_SVHS, 2819 .pll = PLL_28, 2820 .tuner_type = TUNER_ABSENT, 2821 }, 2822 [BTTV_BOARD_APOSONIC_WDVR] = { 2823 .name = "Aposonic W-DVR", 2824 .video_inputs = 4, 2825 .svhs = NO_SVHS, 2826 .muxsel = MUXSEL(2, 3, 1, 0), 2827 .tuner_type = TUNER_ABSENT, 2828 }, 2829 [BTTV_BOARD_ADLINK_MPG24] = { 2830 /* Adlink MPG24 */ 2831 .name = "Adlink MPG24", 2832 .video_inputs = 1, 2833 /* .audio_inputs= 1, */ 2834 .svhs = NO_SVHS, 2835 .muxsel = MUXSEL(2, 2, 2, 2), 2836 .tuner_type = UNSET, 2837 .tuner_addr = ADDR_UNSET, 2838 .pll = PLL_28, 2839 }, 2840 [BTTV_BOARD_BT848_CAP_14] = { 2841 .name = "Bt848 Capture 14MHz", 2842 .video_inputs = 4, 2843 .svhs = 2, 2844 .muxsel = MUXSEL(2, 3, 1, 0), 2845 .pll = PLL_14, 2846 .tuner_type = TUNER_ABSENT, 2847 }, 2848 [BTTV_BOARD_CYBERVISION_CV06] = { 2849 .name = "CyberVision CV06 (SV)", 2850 .video_inputs = 4, 2851 /* .audio_inputs= 0, */ 2852 .svhs = NO_SVHS, 2853 .muxsel = MUXSEL(2, 3, 1, 0), 2854 .pll = PLL_28, 2855 .tuner_type = TUNER_ABSENT, 2856 .tuner_addr = ADDR_UNSET, 2857 }, 2858 [BTTV_BOARD_KWORLD_VSTREAM_XPERT] = { 2859 /* Pojar George <geoubuntu@gmail.com> */ 2860 .name = "Kworld V-Stream Xpert TV PVR878", 2861 .video_inputs = 3, 2862 /* .audio_inputs= 1, */ 2863 .svhs = 2, 2864 .gpiomask = 0x001c0007, 2865 .muxsel = MUXSEL(2, 3, 1, 1), 2866 .gpiomux = { 0, 1, 2, 2 }, 2867 .gpiomute = 3, 2868 .pll = PLL_28, 2869 .tuner_type = TUNER_TENA_9533_DI, 2870 .tuner_addr = ADDR_UNSET, 2871 .has_remote = 1, 2872 .has_radio = 1, 2873 }, 2874 /* ---- card 0xa6---------------------------------- */ 2875 [BTTV_BOARD_PCI_8604PW] = { 2876 /* PCI-8604PW with special unlock sequence */ 2877 .name = "PCI-8604PW", 2878 .video_inputs = 2, 2879 /* .audio_inputs= 0, */ 2880 .svhs = NO_SVHS, 2881 /* The second input is available on CN4, if populated. 2882 * The other 5x2 header (CN2?) connects to the same inputs 2883 * as the on-board BNCs */ 2884 .muxsel = MUXSEL(2, 3), 2885 .tuner_type = TUNER_ABSENT, 2886 .no_msp34xx = 1, 2887 .no_tda7432 = 1, 2888 .pll = PLL_35, 2889 }, 2890}; 2891 2892static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); 2893 2894/* ----------------------------------------------------------------------- */ 2895 2896static unsigned char eeprom_data[256]; 2897 2898/* 2899 * identify card 2900 */ 2901void bttv_idcard(struct bttv *btv) 2902{ 2903 unsigned int gpiobits; 2904 int i,type; 2905 2906 /* read PCI subsystem ID */ 2907 btv->cardid = btv->c.pci->subsystem_device << 16; 2908 btv->cardid |= btv->c.pci->subsystem_vendor; 2909 2910 if (0 != btv->cardid && 0xffffffff != btv->cardid) { 2911 /* look for the card */ 2912 for (type = -1, i = 0; cards[i].id != 0; i++) 2913 if (cards[i].id == btv->cardid) 2914 type = i; 2915 2916 if (type != -1) { 2917 /* found it */ 2918 pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n", 2919 btv->c.nr, cards[type].name, cards[type].cardnr, 2920 btv->cardid & 0xffff, 2921 (btv->cardid >> 16) & 0xffff); 2922 btv->c.type = cards[type].cardnr; 2923 } else { 2924 /* 404 */ 2925 pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n", 2926 btv->c.nr, btv->cardid & 0xffff, 2927 (btv->cardid >> 16) & 0xffff); 2928 pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n"); 2929 } 2930 } 2931 2932 /* let the user override the autodetected type */ 2933 if (card[btv->c.nr] < bttv_num_tvcards) 2934 btv->c.type=card[btv->c.nr]; 2935 2936 /* print which card config we are using */ 2937 pr_info("%d: using: %s [card=%d,%s]\n", 2938 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type, 2939 card[btv->c.nr] < bttv_num_tvcards 2940 ? "insmod option" : "autodetected"); 2941 2942 /* overwrite gpio stuff ?? */ 2943 if (UNSET == audioall && UNSET == audiomux[0]) 2944 return; 2945 2946 if (UNSET != audiomux[0]) { 2947 gpiobits = 0; 2948 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2949 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i]; 2950 gpiobits |= audiomux[i]; 2951 } 2952 } else { 2953 gpiobits = audioall; 2954 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2955 bttv_tvcards[btv->c.type].gpiomux[i] = audioall; 2956 } 2957 } 2958 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits; 2959 pr_info("%d: gpio config override: mask=0x%x, mux=", 2960 btv->c.nr, bttv_tvcards[btv->c.type].gpiomask); 2961 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2962 pr_cont("%s0x%x", 2963 i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]); 2964 } 2965 pr_cont("\n"); 2966} 2967 2968/* 2969 * (most) board specific initialisations goes here 2970 */ 2971 2972/* Some Modular Technology cards have an eeprom, but no subsystem ID */ 2973static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]) 2974{ 2975 int type = -1; 2976 2977 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13)) 2978 type = BTTV_BOARD_MODTEC_205; 2979 else if (0 == strncmp(eeprom_data+20,"Picolo",7)) 2980 type = BTTV_BOARD_EURESYS_PICOLO; 2981 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0) 2982 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */ 2983 2984 if (-1 != type) { 2985 btv->c.type = type; 2986 pr_info("%d: detected by eeprom: %s [card=%d]\n", 2987 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type); 2988 } 2989} 2990 2991static void flyvideo_gpio(struct bttv *btv) 2992{ 2993 int gpio, has_remote, has_radio, is_capture_only; 2994 int is_lr90, has_tda9820_tda9821; 2995 int tuner_type = UNSET, ttype; 2996 2997 gpio_inout(0xffffff, 0); 2998 udelay(8); /* without this we would see the 0x1800 mask */ 2999 gpio = gpio_read(); 3000 /* FIXME: must restore OUR_EN ??? */ 3001 3002 /* all cards provide GPIO info, some have an additional eeprom 3003 * LR50: GPIO coding can be found lower right CP1 .. CP9 3004 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1. 3005 * GPIO14-12: n.c. 3006 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878) 3007 3008 * lowest 3 bytes are remote control codes (no handshake needed) 3009 * xxxFFF: No remote control chip soldered 3010 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered 3011 * Note: Some bits are Audio_Mask ! 3012 */ 3013 ttype = (gpio & 0x0f0000) >> 16; 3014 switch (ttype) { 3015 case 0x0: 3016 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */ 3017 break; 3018 case 0x2: 3019 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */ 3020 break; 3021 case 0x4: 3022 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */ 3023 break; 3024 case 0x6: 3025 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */ 3026 break; 3027 case 0xC: 3028 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */ 3029 break; 3030 default: 3031 pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr); 3032 break; 3033 } 3034 3035 has_remote = gpio & 0x800000; 3036 has_radio = gpio & 0x400000; 3037 /* unknown 0x200000; 3038 * unknown2 0x100000; */ 3039 is_capture_only = !(gpio & 0x008000); /* GPIO15 */ 3040 has_tda9820_tda9821 = !(gpio & 0x004000); 3041 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */ 3042 /* 3043 * gpio & 0x001000 output bit for audio routing */ 3044 3045 if (is_capture_only) 3046 tuner_type = TUNER_ABSENT; /* No tuner present */ 3047 3048 pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n", 3049 btv->c.nr, has_radio ? "yes" : "no", 3050 has_remote ? "yes" : "no", tuner_type, gpio); 3051 pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n", 3052 btv->c.nr, is_lr90 ? "yes" : "no", 3053 has_tda9820_tda9821 ? "yes" : "no", 3054 is_capture_only ? "yes" : "no"); 3055 3056 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */ 3057 btv->tuner_type = tuner_type; 3058 btv->has_radio = has_radio; 3059 3060 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80 3061 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00 3062 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */ 3063 if (has_tda9820_tda9821) 3064 btv->audio_mode_gpio = lt9415_audio; 3065 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */ 3066} 3067 3068static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1, 3069 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 }; 3070static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1, 3071 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 }; 3072 3073static void miro_pinnacle_gpio(struct bttv *btv) 3074{ 3075 int id,msp,gpio; 3076 char *info; 3077 3078 gpio_inout(0xffffff, 0); 3079 gpio = gpio_read(); 3080 id = ((gpio>>10) & 63) -1; 3081 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx"); 3082 if (id < 32) { 3083 btv->tuner_type = miro_tunermap[id]; 3084 if (0 == (gpio & 0x20)) { 3085 btv->has_radio = 1; 3086 if (!miro_fmtuner[id]) { 3087 btv->has_tea575x = 1; 3088 btv->tea_gpio.wren = 6; 3089 btv->tea_gpio.most = 7; 3090 btv->tea_gpio.clk = 8; 3091 btv->tea_gpio.data = 9; 3092 tea575x_init(btv); 3093 } 3094 } else { 3095 btv->has_radio = 0; 3096 } 3097 if (-1 != msp) { 3098 if (btv->c.type == BTTV_BOARD_MIRO) 3099 btv->c.type = BTTV_BOARD_MIROPRO; 3100 if (btv->c.type == BTTV_BOARD_PINNACLE) 3101 btv->c.type = BTTV_BOARD_PINNACLEPRO; 3102 } 3103 pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n", 3104 btv->c.nr, id+1, btv->tuner_type, 3105 !btv->has_radio ? "no" : 3106 (btv->has_tea575x ? "tea575x" : "fmtuner"), 3107 (-1 == msp) ? "no" : "yes"); 3108 } else { 3109 /* new cards with microtune tuner */ 3110 id = 63 - id; 3111 btv->has_radio = 0; 3112 switch (id) { 3113 case 1: 3114 info = "PAL / mono"; 3115 btv->tda9887_conf = TDA9887_INTERCARRIER; 3116 break; 3117 case 2: 3118 info = "PAL+SECAM / stereo"; 3119 btv->has_radio = 1; 3120 btv->tda9887_conf = TDA9887_QSS; 3121 break; 3122 case 3: 3123 info = "NTSC / stereo"; 3124 btv->has_radio = 1; 3125 btv->tda9887_conf = TDA9887_QSS; 3126 break; 3127 case 4: 3128 info = "PAL+SECAM / mono"; 3129 btv->tda9887_conf = TDA9887_QSS; 3130 break; 3131 case 5: 3132 info = "NTSC / mono"; 3133 btv->tda9887_conf = TDA9887_INTERCARRIER; 3134 break; 3135 case 6: 3136 info = "NTSC / stereo"; 3137 btv->tda9887_conf = TDA9887_INTERCARRIER; 3138 break; 3139 case 7: 3140 info = "PAL / stereo"; 3141 btv->tda9887_conf = TDA9887_INTERCARRIER; 3142 break; 3143 default: 3144 info = "oops: unknown card"; 3145 break; 3146 } 3147 if (-1 != msp) 3148 btv->c.type = BTTV_BOARD_PINNACLEPRO; 3149 pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n", 3150 btv->c.nr, id, info, btv->has_radio ? "yes" : "no"); 3151 btv->tuner_type = TUNER_MT2032; 3152 } 3153} 3154 3155/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */ 3156#define LM1882_SYNC_DRIVE 0x200000L 3157 3158static void init_ids_eagle(struct bttv *btv) 3159{ 3160 gpio_inout(0xffffff,0xFFFF37); 3161 gpio_write(0x200020); 3162 3163 /* flash strobe inverter ?! */ 3164 gpio_write(0x200024); 3165 3166 /* switch sync drive off */ 3167 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); 3168 3169 /* set BT848 muxel to 2 */ 3170 btaor((2)<<5, ~(2<<5), BT848_IFORM); 3171} 3172 3173/* Muxsel helper for the IDS Eagle. 3174 * the eagles does not use the standard muxsel-bits but 3175 * has its own multiplexer */ 3176static void eagle_muxsel(struct bttv *btv, unsigned int input) 3177{ 3178 gpio_bits(3, input & 3); 3179 3180 /* composite */ 3181 /* set chroma ADC to sleep */ 3182 btor(BT848_ADC_C_SLEEP, BT848_ADC); 3183 /* set to composite video */ 3184 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL); 3185 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL); 3186 3187 /* switch sync drive off */ 3188 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); 3189} 3190 3191static void gvc1100_muxsel(struct bttv *btv, unsigned int input) 3192{ 3193 static const int masks[] = {0x30, 0x01, 0x12, 0x23}; 3194 gpio_write(masks[input%4]); 3195} 3196 3197/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and 3198 alarms output 3199 3200 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 3201 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | | 3202 3203 IN - sensor inputs, INx - sensor inputs and TI XORed together 3204 O1,O2,O3 - alarm outputs (relays) 3205 3206 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0 3207 3208*/ 3209 3210static void init_lmlbt4x(struct bttv *btv) 3211{ 3212 pr_debug("LMLBT4x init\n"); 3213 btwrite(0x000000, BT848_GPIO_REG_INP); 3214 gpio_inout(0xffffff, 0x0006C0); 3215 gpio_write(0x000000); 3216} 3217 3218static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input) 3219{ 3220 unsigned int inmux = input % 8; 3221 gpio_inout( 0xf, 0xf ); 3222 gpio_bits( 0xf, inmux ); 3223} 3224 3225static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input) 3226{ 3227 unsigned int inmux = input % 4; 3228 gpio_inout( 3<<9, 3<<9 ); 3229 gpio_bits( 3<<9, inmux<<9 ); 3230} 3231 3232static void geovision_muxsel(struct bttv *btv, unsigned int input) 3233{ 3234 unsigned int inmux = input % 16; 3235 gpio_inout(0xf, 0xf); 3236 gpio_bits(0xf, inmux); 3237} 3238 3239/* 3240 * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878. 3241 * The first 74HC4051 has the lower 8 inputs, the second one the higher 8. 3242 * The muxes are controlled via a 74HC373 latch which is connected to 3243 * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch. 3244 * Q0 of the latch is connected to the Enable (~E) input of the first 3245 * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051. 3246 * Q4 - Q7 are connected to the second 74HC4051 in the same way. 3247 */ 3248 3249static void td3116_latch_value(struct bttv *btv, u32 value) 3250{ 3251 gpio_bits((1<<18) | 0xff, value); 3252 gpio_bits((1<<18) | 0xff, (1<<18) | value); 3253 udelay(1); 3254 gpio_bits((1<<18) | 0xff, value); 3255} 3256 3257static void td3116_muxsel(struct bttv *btv, unsigned int input) 3258{ 3259 u32 value; 3260 u32 highbit; 3261 3262 highbit = (input & 0x8) >> 3 ; 3263 3264 /* Disable outputs and set value in the mux */ 3265 value = 0x11; /* Disable outputs */ 3266 value |= ((input & 0x7) << 1) << (4 * highbit); 3267 td3116_latch_value(btv, value); 3268 3269 /* Enable the correct output */ 3270 value &= ~0x11; 3271 value |= ((highbit ^ 0x1) << 4) | highbit; 3272 td3116_latch_value(btv, value); 3273} 3274 3275/* ----------------------------------------------------------------------- */ 3276 3277static void bttv_reset_audio(struct bttv *btv) 3278{ 3279 /* 3280 * BT878A has a audio-reset register. 3281 * 1. This register is an audio reset function but it is in 3282 * function-0 (video capture) address space. 3283 * 2. It is enough to do this once per power-up of the card. 3284 * 3. There is a typo in the Conexant doc -- it is not at 3285 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!). 3286 * --//Shrikumar 030609 3287 */ 3288 if (btv->id != 878) 3289 return; 3290 3291 if (bttv_debug) 3292 pr_debug("%d: BT878A ARESET\n", btv->c.nr); 3293 btwrite((1<<7), 0x058); 3294 udelay(10); 3295 btwrite( 0, 0x058); 3296} 3297 3298/* initialization part one -- before registering i2c bus */ 3299void bttv_init_card1(struct bttv *btv) 3300{ 3301 switch (btv->c.type) { 3302 case BTTV_BOARD_HAUPPAUGE: 3303 case BTTV_BOARD_HAUPPAUGE878: 3304 boot_msp34xx(btv,5); 3305 break; 3306 case BTTV_BOARD_VOODOOTV_200: 3307 case BTTV_BOARD_VOODOOTV_FM: 3308 boot_msp34xx(btv,20); 3309 break; 3310 case BTTV_BOARD_AVERMEDIA98: 3311 boot_msp34xx(btv,11); 3312 break; 3313 case BTTV_BOARD_HAUPPAUGEPVR: 3314 pvr_boot(btv); 3315 break; 3316 case BTTV_BOARD_TWINHAN_DST: 3317 case BTTV_BOARD_AVDVBT_771: 3318 case BTTV_BOARD_PINNACLESAT: 3319 btv->use_i2c_hw = 1; 3320 break; 3321 case BTTV_BOARD_ADLINK_RTV24: 3322 init_RTV24( btv ); 3323 break; 3324 case BTTV_BOARD_PCI_8604PW: 3325 init_PCI8604PW(btv); 3326 break; 3327 3328 } 3329 if (!bttv_tvcards[btv->c.type].has_dvb) 3330 bttv_reset_audio(btv); 3331} 3332 3333/* initialization part two -- after registering i2c bus */ 3334void bttv_init_card2(struct bttv *btv) 3335{ 3336 btv->tuner_type = UNSET; 3337 3338 if (BTTV_BOARD_UNKNOWN == btv->c.type) { 3339 bttv_readee(btv,eeprom_data,0xa0); 3340 identify_by_eeprom(btv,eeprom_data); 3341 } 3342 3343 switch (btv->c.type) { 3344 case BTTV_BOARD_MIRO: 3345 case BTTV_BOARD_MIROPRO: 3346 case BTTV_BOARD_PINNACLE: 3347 case BTTV_BOARD_PINNACLEPRO: 3348 /* miro/pinnacle */ 3349 miro_pinnacle_gpio(btv); 3350 break; 3351 case BTTV_BOARD_FLYVIDEO_98: 3352 case BTTV_BOARD_MAXI: 3353 case BTTV_BOARD_LIFE_FLYKIT: 3354 case BTTV_BOARD_FLYVIDEO: 3355 case BTTV_BOARD_TYPHOON_TVIEW: 3356 case BTTV_BOARD_CHRONOS_VS2: 3357 case BTTV_BOARD_FLYVIDEO_98FM: 3358 case BTTV_BOARD_FLYVIDEO2000: 3359 case BTTV_BOARD_FLYVIDEO98EZ: 3360 case BTTV_BOARD_CONFERENCETV: 3361 case BTTV_BOARD_LIFETEC_9415: 3362 flyvideo_gpio(btv); 3363 break; 3364 case BTTV_BOARD_HAUPPAUGE: 3365 case BTTV_BOARD_HAUPPAUGE878: 3366 case BTTV_BOARD_HAUPPAUGEPVR: 3367 /* pick up some config infos from the eeprom */ 3368 bttv_readee(btv,eeprom_data,0xa0); 3369 hauppauge_eeprom(btv); 3370 break; 3371 case BTTV_BOARD_AVERMEDIA98: 3372 case BTTV_BOARD_AVPHONE98: 3373 bttv_readee(btv,eeprom_data,0xa0); 3374 avermedia_eeprom(btv); 3375 break; 3376 case BTTV_BOARD_PXC200: 3377 init_PXC200(btv); 3378 break; 3379 case BTTV_BOARD_PICOLO_TETRA_CHIP: 3380 picolo_tetra_init(btv); 3381 break; 3382 case BTTV_BOARD_VHX: 3383 btv->has_radio = 1; 3384 btv->has_tea575x = 1; 3385 btv->tea_gpio.wren = 5; 3386 btv->tea_gpio.most = 6; 3387 btv->tea_gpio.clk = 3; 3388 btv->tea_gpio.data = 4; 3389 tea575x_init(btv); 3390 break; 3391 case BTTV_BOARD_VOBIS_BOOSTAR: 3392 case BTTV_BOARD_TERRATV: 3393 terratec_active_radio_upgrade(btv); 3394 break; 3395 case BTTV_BOARD_MAGICTVIEW061: 3396 if (btv->cardid == 0x3002144f) { 3397 btv->has_radio=1; 3398 pr_info("%d: radio detected by subsystem id (CPH05x)\n", 3399 btv->c.nr); 3400 } 3401 break; 3402 case BTTV_BOARD_STB2: 3403 if (btv->cardid == 0x3060121a) { 3404 /* Fix up entry for 3DFX VoodooTV 100, 3405 which is an OEM STB card variant. */ 3406 btv->has_radio=0; 3407 btv->tuner_type=TUNER_TEMIC_NTSC; 3408 } 3409 break; 3410 case BTTV_BOARD_OSPREY1x0: 3411 case BTTV_BOARD_OSPREY1x0_848: 3412 case BTTV_BOARD_OSPREY101_848: 3413 case BTTV_BOARD_OSPREY1x1: 3414 case BTTV_BOARD_OSPREY1x1_SVID: 3415 case BTTV_BOARD_OSPREY2xx: 3416 case BTTV_BOARD_OSPREY2x0_SVID: 3417 case BTTV_BOARD_OSPREY2x0: 3418 case BTTV_BOARD_OSPREY440: 3419 case BTTV_BOARD_OSPREY500: 3420 case BTTV_BOARD_OSPREY540: 3421 case BTTV_BOARD_OSPREY2000: 3422 bttv_readee(btv,eeprom_data,0xa0); 3423 osprey_eeprom(btv, eeprom_data); 3424 break; 3425 case BTTV_BOARD_IDS_EAGLE: 3426 init_ids_eagle(btv); 3427 break; 3428 case BTTV_BOARD_MODTEC_205: 3429 bttv_readee(btv,eeprom_data,0xa0); 3430 modtec_eeprom(btv); 3431 break; 3432 case BTTV_BOARD_LMLBT4: 3433 init_lmlbt4x(btv); 3434 break; 3435 case BTTV_BOARD_TIBET_CS16: 3436 tibetCS16_init(btv); 3437 break; 3438 case BTTV_BOARD_KODICOM_4400R: 3439 kodicom4400r_init(btv); 3440 break; 3441 case BTTV_BOARD_GEOVISION_GV800S: 3442 gv800s_init(btv); 3443 break; 3444 } 3445 3446 /* pll configuration */ 3447 if (!(btv->id==848 && btv->revision==0x11)) { 3448 /* defaults from card list */ 3449 if (PLL_28 == bttv_tvcards[btv->c.type].pll) { 3450 btv->pll.pll_ifreq=28636363; 3451 btv->pll.pll_crystal=BT848_IFORM_XT0; 3452 } 3453 if (PLL_35 == bttv_tvcards[btv->c.type].pll) { 3454 btv->pll.pll_ifreq=35468950; 3455 btv->pll.pll_crystal=BT848_IFORM_XT1; 3456 } 3457 if (PLL_14 == bttv_tvcards[btv->c.type].pll) { 3458 btv->pll.pll_ifreq = 14318181; 3459 btv->pll.pll_crystal = BT848_IFORM_XT0; 3460 } 3461 /* insmod options can override */ 3462 switch (pll[btv->c.nr]) { 3463 case 0: /* none */ 3464 btv->pll.pll_crystal = 0; 3465 btv->pll.pll_ifreq = 0; 3466 btv->pll.pll_ofreq = 0; 3467 break; 3468 case 1: /* 28 MHz */ 3469 case 28: 3470 btv->pll.pll_ifreq = 28636363; 3471 btv->pll.pll_ofreq = 0; 3472 btv->pll.pll_crystal = BT848_IFORM_XT0; 3473 break; 3474 case 2: /* 35 MHz */ 3475 case 35: 3476 btv->pll.pll_ifreq = 35468950; 3477 btv->pll.pll_ofreq = 0; 3478 btv->pll.pll_crystal = BT848_IFORM_XT1; 3479 break; 3480 case 3: /* 14 MHz */ 3481 case 14: 3482 btv->pll.pll_ifreq = 14318181; 3483 btv->pll.pll_ofreq = 0; 3484 btv->pll.pll_crystal = BT848_IFORM_XT0; 3485 break; 3486 } 3487 } 3488 btv->pll.pll_current = -1; 3489 3490 /* tuner configuration (from card list / autodetect / insmod option) */ 3491 if (UNSET != bttv_tvcards[btv->c.type].tuner_type) 3492 if (UNSET == btv->tuner_type) 3493 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type; 3494 if (UNSET != tuner[btv->c.nr]) 3495 btv->tuner_type = tuner[btv->c.nr]; 3496 3497 if (btv->tuner_type == TUNER_ABSENT) 3498 pr_info("%d: tuner absent\n", btv->c.nr); 3499 else if (btv->tuner_type == UNSET) 3500 pr_warn("%d: tuner type unset\n", btv->c.nr); 3501 else 3502 pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type); 3503 3504 if (autoload != UNSET) { 3505 pr_warn("%d: the autoload option is obsolete\n", btv->c.nr); 3506 pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n", 3507 btv->c.nr); 3508 } 3509 3510 if (UNSET == btv->tuner_type) 3511 btv->tuner_type = TUNER_ABSENT; 3512 3513 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ? 3514 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET; 3515 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ? 3516 UNSET : bttv_tvcards[btv->c.type].svhs; 3517 if (svhs[btv->c.nr] != UNSET) 3518 btv->svhs = svhs[btv->c.nr]; 3519 if (remote[btv->c.nr] != UNSET) 3520 btv->has_remote = remote[btv->c.nr]; 3521 3522 if (bttv_tvcards[btv->c.type].has_radio) 3523 btv->has_radio = 1; 3524 if (bttv_tvcards[btv->c.type].has_remote) 3525 btv->has_remote = 1; 3526 if (!bttv_tvcards[btv->c.type].no_gpioirq) 3527 btv->gpioirq = 1; 3528 if (bttv_tvcards[btv->c.type].volume_gpio) 3529 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio; 3530 if (bttv_tvcards[btv->c.type].audio_mode_gpio) 3531 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio; 3532 3533 if (btv->tuner_type == TUNER_ABSENT) 3534 return; /* no tuner or related drivers to load */ 3535 3536 if (btv->has_saa6588 || saa6588[btv->c.nr]) { 3537 /* Probe for RDS receiver chip */ 3538 static const unsigned short addrs[] = { 3539 0x20 >> 1, 3540 0x22 >> 1, 3541 I2C_CLIENT_END 3542 }; 3543 struct v4l2_subdev *sd; 3544 3545 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3546 &btv->c.i2c_adap, "saa6588", 0, addrs); 3547 btv->has_saa6588 = (sd != NULL); 3548 } 3549 3550 /* try to detect audio/fader chips */ 3551 3552 /* First check if the user specified the audio chip via a module 3553 option. */ 3554 3555 switch (audiodev[btv->c.nr]) { 3556 case -1: 3557 return; /* do not load any audio module */ 3558 3559 case 0: /* autodetect */ 3560 break; 3561 3562 case 1: { 3563 /* The user specified that we should probe for msp3400 */ 3564 static const unsigned short addrs[] = { 3565 I2C_ADDR_MSP3400 >> 1, 3566 I2C_ADDR_MSP3400_ALT >> 1, 3567 I2C_CLIENT_END 3568 }; 3569 3570 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3571 &btv->c.i2c_adap, "msp3400", 0, addrs); 3572 if (btv->sd_msp34xx) 3573 return; 3574 goto no_audio; 3575 } 3576 3577 case 2: { 3578 /* The user specified that we should probe for tda7432 */ 3579 static const unsigned short addrs[] = { 3580 I2C_ADDR_TDA7432 >> 1, 3581 I2C_CLIENT_END 3582 }; 3583 3584 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3585 &btv->c.i2c_adap, "tda7432", 0, addrs)) 3586 return; 3587 goto no_audio; 3588 } 3589 3590 case 3: { 3591 /* The user specified that we should probe for tvaudio */ 3592 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3593 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); 3594 if (btv->sd_tvaudio) 3595 return; 3596 goto no_audio; 3597 } 3598 3599 default: 3600 pr_warn("%d: unknown audiodev value!\n", btv->c.nr); 3601 return; 3602 } 3603 3604 /* There were no overrides, so now we try to discover this through the 3605 card definition */ 3606 3607 /* probe for msp3400 first: this driver can detect whether or not 3608 it really is a msp3400, so it will return NULL when the device 3609 found is really something else (e.g. a tea6300). */ 3610 if (!bttv_tvcards[btv->c.type].no_msp34xx) { 3611 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3612 &btv->c.i2c_adap, "msp3400", 3613 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1)); 3614 } else if (bttv_tvcards[btv->c.type].msp34xx_alt) { 3615 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3616 &btv->c.i2c_adap, "msp3400", 3617 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1)); 3618 } 3619 3620 /* If we found a msp34xx, then we're done. */ 3621 if (btv->sd_msp34xx) 3622 return; 3623 3624 /* Now see if we can find one of the tvaudio devices. */ 3625 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3626 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); 3627 if (btv->sd_tvaudio) { 3628 /* There may be two tvaudio chips on the card, so try to 3629 find another. */ 3630 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3631 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); 3632 } 3633 3634 /* it might also be a tda7432. */ 3635 if (!bttv_tvcards[btv->c.type].no_tda7432) { 3636 static const unsigned short addrs[] = { 3637 I2C_ADDR_TDA7432 >> 1, 3638 I2C_CLIENT_END 3639 }; 3640 3641 btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3642 &btv->c.i2c_adap, "tda7432", 0, addrs); 3643 if (btv->sd_tda7432) 3644 return; 3645 } 3646 if (btv->sd_tvaudio) 3647 return; 3648 3649no_audio: 3650 pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr); 3651} 3652 3653 3654/* initialize the tuner */ 3655void bttv_init_tuner(struct bttv *btv) 3656{ 3657 int addr = ADDR_UNSET; 3658 3659 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) 3660 addr = bttv_tvcards[btv->c.type].tuner_addr; 3661 3662 if (btv->tuner_type != TUNER_ABSENT) { 3663 struct tuner_setup tun_setup; 3664 3665 /* Load tuner module before issuing tuner config call! */ 3666 if (btv->has_radio) 3667 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3668 &btv->c.i2c_adap, "tuner", 3669 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); 3670 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3671 &btv->c.i2c_adap, "tuner", 3672 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); 3673 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3674 &btv->c.i2c_adap, "tuner", 3675 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); 3676 3677 tun_setup.mode_mask = T_ANALOG_TV; 3678 tun_setup.type = btv->tuner_type; 3679 tun_setup.addr = addr; 3680 3681 if (btv->has_radio) 3682 tun_setup.mode_mask |= T_RADIO; 3683 3684 bttv_call_all(btv, tuner, s_type_addr, &tun_setup); 3685 } 3686 3687 if (btv->tda9887_conf) { 3688 struct v4l2_priv_tun_config tda9887_cfg; 3689 3690 tda9887_cfg.tuner = TUNER_TDA9887; 3691 tda9887_cfg.priv = &btv->tda9887_conf; 3692 3693 bttv_call_all(btv, tuner, s_config, &tda9887_cfg); 3694 } 3695} 3696 3697/* ----------------------------------------------------------------------- */ 3698 3699static void modtec_eeprom(struct bttv *btv) 3700{ 3701 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) { 3702 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I; 3703 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3704 btv->c.nr, &eeprom_data[0x1e]); 3705 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) { 3706 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I; 3707 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3708 btv->c.nr, &eeprom_data[0x1e]); 3709 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) { 3710 btv->tuner_type=TUNER_PHILIPS_NTSC; 3711 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3712 btv->c.nr, &eeprom_data[0x1e]); 3713 } else { 3714 pr_info("%d: Modtec: Unknown TunerString: %s\n", 3715 btv->c.nr, &eeprom_data[0x1e]); 3716 } 3717} 3718 3719static void hauppauge_eeprom(struct bttv *btv) 3720{ 3721 struct tveeprom tv; 3722 3723 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data); 3724 btv->tuner_type = tv.tuner_type; 3725 btv->has_radio = tv.has_radio; 3726 3727 pr_info("%d: Hauppauge eeprom indicates model#%d\n", 3728 btv->c.nr, tv.model); 3729 3730 /* 3731 * Some of the 878 boards have duplicate PCI IDs. Switch the board 3732 * type based on model #. 3733 */ 3734 if(tv.model == 64900) { 3735 pr_info("%d: Switching board type from %s to %s\n", 3736 btv->c.nr, 3737 bttv_tvcards[btv->c.type].name, 3738 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name); 3739 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB; 3740 } 3741 3742 /* The 61334 needs the msp3410 to do the radio demod to get sound */ 3743 if (tv.model == 61334) 3744 btv->radio_uses_msp_demodulator = 1; 3745} 3746 3747/* ----------------------------------------------------------------------- */ 3748 3749static void bttv_tea575x_set_pins(struct snd_tea575x *tea, u8 pins) 3750{ 3751 struct bttv *btv = tea->private_data; 3752 struct bttv_tea575x_gpio gpio = btv->tea_gpio; 3753 u16 val = 0; 3754 3755 val |= (pins & TEA575X_DATA) ? (1 << gpio.data) : 0; 3756 val |= (pins & TEA575X_CLK) ? (1 << gpio.clk) : 0; 3757 val |= (pins & TEA575X_WREN) ? (1 << gpio.wren) : 0; 3758 3759 gpio_bits((1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren), val); 3760 if (btv->mbox_ior) { 3761 /* IOW and CSEL active */ 3762 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); 3763 udelay(5); 3764 /* all inactive */ 3765 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 3766 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 3767 } 3768} 3769 3770static u8 bttv_tea575x_get_pins(struct snd_tea575x *tea) 3771{ 3772 struct bttv *btv = tea->private_data; 3773 struct bttv_tea575x_gpio gpio = btv->tea_gpio; 3774 u8 ret = 0; 3775 u16 val; 3776 3777 if (btv->mbox_ior) { 3778 /* IOR and CSEL active */ 3779 gpio_bits(btv->mbox_ior | btv->mbox_csel, 0); 3780 udelay(5); 3781 } 3782 val = gpio_read(); 3783 if (btv->mbox_ior) { 3784 /* all inactive */ 3785 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 3786 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 3787 } 3788 3789 if (val & (1 << gpio.data)) 3790 ret |= TEA575X_DATA; 3791 if (val & (1 << gpio.most)) 3792 ret |= TEA575X_MOST; 3793 3794 return ret; 3795} 3796 3797static void bttv_tea575x_set_direction(struct snd_tea575x *tea, bool output) 3798{ 3799 struct bttv *btv = tea->private_data; 3800 struct bttv_tea575x_gpio gpio = btv->tea_gpio; 3801 u32 mask = (1 << gpio.clk) | (1 << gpio.wren) | (1 << gpio.data) | 3802 (1 << gpio.most); 3803 3804 if (output) 3805 gpio_inout(mask, (1 << gpio.data) | (1 << gpio.clk) | 3806 (1 << gpio.wren)); 3807 else 3808 gpio_inout(mask, (1 << gpio.clk) | (1 << gpio.wren)); 3809} 3810 3811static struct snd_tea575x_ops bttv_tea_ops = { 3812 .set_pins = bttv_tea575x_set_pins, 3813 .get_pins = bttv_tea575x_get_pins, 3814 .set_direction = bttv_tea575x_set_direction, 3815}; 3816 3817static int tea575x_init(struct bttv *btv) 3818{ 3819 btv->tea.private_data = btv; 3820 btv->tea.ops = &bttv_tea_ops; 3821 if (!snd_tea575x_hw_init(&btv->tea)) { 3822 pr_info("%d: detected TEA575x radio\n", btv->c.nr); 3823 btv->tea.mute = false; 3824 return 0; 3825 } 3826 3827 btv->has_tea575x = 0; 3828 btv->has_radio = 0; 3829 3830 return -ENODEV; 3831} 3832 3833/* ----------------------------------------------------------------------- */ 3834 3835static int terratec_active_radio_upgrade(struct bttv *btv) 3836{ 3837 btv->has_radio = 1; 3838 btv->has_tea575x = 1; 3839 btv->tea_gpio.wren = 4; 3840 btv->tea_gpio.most = 5; 3841 btv->tea_gpio.clk = 3; 3842 btv->tea_gpio.data = 2; 3843 3844 btv->mbox_iow = 1 << 8; 3845 btv->mbox_ior = 1 << 9; 3846 btv->mbox_csel = 1 << 10; 3847 3848 if (!tea575x_init(btv)) { 3849 pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr); 3850 btv->has_saa6588 = 1; 3851 } 3852 3853 return 0; 3854} 3855 3856 3857/* ----------------------------------------------------------------------- */ 3858 3859/* 3860 * minimal bootstrap for the WinTV/PVR -- upload altera firmware. 3861 * 3862 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have 3863 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be 3864 * unpacked with unzip). 3865 */ 3866#define PVR_GPIO_DELAY 10 3867 3868#define BTTV_ALT_DATA 0x000001 3869#define BTTV_ALT_DCLK 0x100000 3870#define BTTV_ALT_NCONFIG 0x800000 3871 3872static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen) 3873{ 3874 u32 n; 3875 u8 bits; 3876 int i; 3877 3878 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG); 3879 gpio_write(0); 3880 udelay(PVR_GPIO_DELAY); 3881 3882 gpio_write(BTTV_ALT_NCONFIG); 3883 udelay(PVR_GPIO_DELAY); 3884 3885 for (n = 0; n < microlen; n++) { 3886 bits = micro[n]; 3887 for (i = 0 ; i < 8 ; i++) { 3888 gpio_bits(BTTV_ALT_DCLK,0); 3889 if (bits & 0x01) 3890 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA); 3891 else 3892 gpio_bits(BTTV_ALT_DATA,0); 3893 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); 3894 bits >>= 1; 3895 } 3896 } 3897 gpio_bits(BTTV_ALT_DCLK,0); 3898 udelay(PVR_GPIO_DELAY); 3899 3900 /* begin Altera init loop (Not necessary,but doesn't hurt) */ 3901 for (i = 0 ; i < 30 ; i++) { 3902 gpio_bits(BTTV_ALT_DCLK,0); 3903 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); 3904 } 3905 gpio_bits(BTTV_ALT_DCLK,0); 3906 return 0; 3907} 3908 3909static int pvr_boot(struct bttv *btv) 3910{ 3911 const struct firmware *fw_entry; 3912 int rc; 3913 3914 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev); 3915 if (rc != 0) { 3916 pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr); 3917 return rc; 3918 } 3919 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size); 3920 pr_info("%d: altera firmware upload %s\n", 3921 btv->c.nr, (rc < 0) ? "failed" : "ok"); 3922 release_firmware(fw_entry); 3923 return rc; 3924} 3925 3926/* ----------------------------------------------------------------------- */ 3927/* some osprey specific stuff */ 3928 3929static void osprey_eeprom(struct bttv *btv, const u8 ee[256]) 3930{ 3931 int i; 3932 u32 serial = 0; 3933 int cardid = -1; 3934 3935 /* This code will nevery actually get called in this case.... */ 3936 if (btv->c.type == BTTV_BOARD_UNKNOWN) { 3937 /* this might be an antique... check for MMAC label in eeprom */ 3938 if (!strncmp(ee, "MMAC", 4)) { 3939 u8 checksum = 0; 3940 for (i = 0; i < 21; i++) 3941 checksum += ee[i]; 3942 if (checksum != ee[21]) 3943 return; 3944 cardid = BTTV_BOARD_OSPREY1x0_848; 3945 for (i = 12; i < 21; i++) 3946 serial *= 10, serial += ee[i] - '0'; 3947 } 3948 } else { 3949 unsigned short type; 3950 3951 for (i = 4 * 16; i < 8 * 16; i += 16) { 3952 u16 checksum = (__force u16)ip_compute_csum(ee + i, 16); 3953 3954 if ((checksum & 0xff) + (checksum >> 8) == 0xff) 3955 break; 3956 } 3957 if (i >= 8*16) 3958 return; 3959 ee += i; 3960 3961 /* found a valid descriptor */ 3962 type = get_unaligned_be16((__be16 *)(ee+4)); 3963 3964 switch(type) { 3965 /* 848 based */ 3966 case 0x0004: 3967 cardid = BTTV_BOARD_OSPREY1x0_848; 3968 break; 3969 case 0x0005: 3970 cardid = BTTV_BOARD_OSPREY101_848; 3971 break; 3972 3973 /* 878 based */ 3974 case 0x0012: 3975 case 0x0013: 3976 cardid = BTTV_BOARD_OSPREY1x0; 3977 break; 3978 case 0x0014: 3979 case 0x0015: 3980 cardid = BTTV_BOARD_OSPREY1x1; 3981 break; 3982 case 0x0016: 3983 case 0x0017: 3984 case 0x0020: 3985 cardid = BTTV_BOARD_OSPREY1x1_SVID; 3986 break; 3987 case 0x0018: 3988 case 0x0019: 3989 case 0x001E: 3990 case 0x001F: 3991 cardid = BTTV_BOARD_OSPREY2xx; 3992 break; 3993 case 0x001A: 3994 case 0x001B: 3995 cardid = BTTV_BOARD_OSPREY2x0_SVID; 3996 break; 3997 case 0x0040: 3998 cardid = BTTV_BOARD_OSPREY500; 3999 break; 4000 case 0x0050: 4001 case 0x0056: 4002 cardid = BTTV_BOARD_OSPREY540; 4003 /* bttv_osprey_540_init(btv); */ 4004 break; 4005 case 0x0060: 4006 case 0x0070: 4007 case 0x00A0: 4008 cardid = BTTV_BOARD_OSPREY2x0; 4009 /* enable output on select control lines */ 4010 gpio_inout(0xffffff,0x000303); 4011 break; 4012 case 0x00D8: 4013 cardid = BTTV_BOARD_OSPREY440; 4014 break; 4015 default: 4016 /* unknown...leave generic, but get serial # */ 4017 pr_info("%d: osprey eeprom: unknown card type 0x%04x\n", 4018 btv->c.nr, type); 4019 break; 4020 } 4021 serial = get_unaligned_be32((__be32 *)(ee+6)); 4022 } 4023 4024 pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n", 4025 btv->c.nr, cardid, 4026 cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial); 4027 4028 if (cardid<0 || btv->c.type == cardid) 4029 return; 4030 4031 /* card type isn't set correctly */ 4032 if (card[btv->c.nr] < bttv_num_tvcards) { 4033 pr_warn("%d: osprey eeprom: Not overriding user specified card type\n", 4034 btv->c.nr); 4035 } else { 4036 pr_info("%d: osprey eeprom: Changing card type from %d to %d\n", 4037 btv->c.nr, btv->c.type, cardid); 4038 btv->c.type = cardid; 4039 } 4040} 4041 4042/* ----------------------------------------------------------------------- */ 4043/* AVermedia specific stuff, from bktr_card.c */ 4044 4045static int tuner_0_table[] = { 4046 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/, 4047 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/, 4048 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, 4049 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, 4050 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL, 4051 TUNER_PHILIPS_FM1216ME_MK3 }; 4052 4053static int tuner_1_table[] = { 4054 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL, 4055 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, 4056 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, 4057 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */ 4058 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL}; 4059 4060static void avermedia_eeprom(struct bttv *btv) 4061{ 4062 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0; 4063 4064 tuner_make = (eeprom_data[0x41] & 0x7); 4065 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; 4066 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4; 4067 btv->has_remote = (eeprom_data[0x42] & 0x01); 4068 4069 if (tuner_make == 0 || tuner_make == 2) 4070 if (tuner_format <= 0x0a) 4071 tuner_type = tuner_0_table[tuner_format]; 4072 if (tuner_make == 1) 4073 if (tuner_format <= 9) 4074 tuner_type = tuner_1_table[tuner_format]; 4075 4076 if (tuner_make == 4) 4077 if (tuner_format == 0x09) 4078 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */ 4079 4080 pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=", 4081 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]); 4082 if (tuner_type) { 4083 btv->tuner_type = tuner_type; 4084 pr_cont("%d", tuner_type); 4085 } else 4086 pr_cont("Unknown type"); 4087 pr_cont(" radio:%s remote control:%s\n", 4088 tuner_tv_fm ? "yes" : "no", 4089 btv->has_remote ? "yes" : "no"); 4090} 4091 4092/* 4093 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880 4094 * analog demod, which is not I2C controlled like the newer and more common 4095 * TDA9887 series. Instead is has two tri-state input pins, S0 and S1, 4096 * that control the IF for the video and audio. Apparently, bttv GPIO 4097 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I 4098 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC). 4099 */ 4100u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits) 4101{ 4102 4103 if (btv->audio_input == TVAUDIO_INPUT_TUNER) { 4104 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN) 4105 gpiobits |= 0x10000; 4106 else 4107 gpiobits &= ~0x10000; 4108 } 4109 4110 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits); 4111 return gpiobits; 4112} 4113 4114 4115/* 4116 * reset/enable the MSP on some Hauppauge cards 4117 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)! 4118 * 4119 * Hauppauge: pin 5 4120 * Voodoo: pin 20 4121 */ 4122static void boot_msp34xx(struct bttv *btv, int pin) 4123{ 4124 int mask = (1 << pin); 4125 4126 gpio_inout(mask,mask); 4127 gpio_bits(mask,0); 4128 mdelay(2); 4129 udelay(500); 4130 gpio_bits(mask,mask); 4131 4132 if (bttv_gpio) 4133 bttv_gpio_tracking(btv,"msp34xx"); 4134 if (bttv_verbose) 4135 pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n", 4136 btv->c.nr, pin); 4137} 4138 4139/* ----------------------------------------------------------------------- */ 4140/* Imagenation L-Model PXC200 Framegrabber */ 4141/* This is basically the same procedure as 4142 * used by Alessandro Rubini in his pxc200 4143 * driver, but using BTTV functions */ 4144 4145static void init_PXC200(struct bttv *btv) 4146{ 4147 static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02, 4148 0x03, 0x04, 0x05, 0x06, 0x00 }; 4149 unsigned int i; 4150 int tmp; 4151 u32 val; 4152 4153 /* Initialise GPIO-connevted stuff */ 4154 gpio_inout(0xffffff, (1<<13)); 4155 gpio_write(0); 4156 udelay(3); 4157 gpio_write(1<<13); 4158 /* GPIO inputs are pulled up, so no need to drive 4159 * reset pin any longer */ 4160 gpio_bits(0xffffff, 0); 4161 if (bttv_gpio) 4162 bttv_gpio_tracking(btv,"pxc200"); 4163 4164 /* we could/should try and reset/control the AD pots? but 4165 right now we simply turned off the crushing. Without 4166 this the AGC drifts drifts 4167 remember the EN is reverse logic --> 4168 setting BT848_ADC_AGC_EN disable the AGC 4169 tboult@eecs.lehigh.edu 4170 */ 4171 4172 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC); 4173 4174 /* Initialise MAX517 DAC */ 4175 pr_info("Setting DAC reference voltage level ...\n"); 4176 bttv_I2CWrite(btv,0x5E,0,0x80,1); 4177 4178 /* Initialise 12C508 PIC */ 4179 /* The I2CWrite and I2CRead commmands are actually to the 4180 * same chips - but the R/W bit is included in the address 4181 * argument so the numbers are different */ 4182 4183 4184 pr_info("Initialising 12C508 PIC chip ...\n"); 4185 4186 /* First of all, enable the clock line. This is used in the PXC200-F */ 4187 val = btread(BT848_GPIO_DMA_CTL); 4188 val |= BT848_GPIO_DMA_CTL_GPCLKMODE; 4189 btwrite(val, BT848_GPIO_DMA_CTL); 4190 4191 /* Then, push to 0 the reset pin long enough to reset the * 4192 * device same as above for the reset line, but not the same 4193 * value sent to the GPIO-connected stuff 4194 * which one is the good one? */ 4195 gpio_inout(0xffffff,(1<<2)); 4196 gpio_write(0); 4197 udelay(10); 4198 gpio_write(1<<2); 4199 4200 for (i = 0; i < ARRAY_SIZE(vals); i++) { 4201 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1); 4202 if (tmp != -1) { 4203 pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n", 4204 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL)); 4205 } 4206 } 4207 4208 pr_info("PXC200 Initialised\n"); 4209} 4210 4211 4212 4213/* ----------------------------------------------------------------------- */ 4214/* 4215 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock 4216 * it. This apparently involves the following procedure for each 878 chip: 4217 * 4218 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register 4219 * 4220 * 2) write to GPIO_DATA 4221 * - 0x0E 4222 * - sleep 1ms 4223 * - 0x10 + 0x0E 4224 * - sleep 10ms 4225 * - 0x0E 4226 * read from GPIO_DATA into buf (uint_32) 4227 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 ) 4228 * error. ERROR_CPLD_Check_Failed stop. 4229 * 4230 * 3) write to GPIO_DATA 4231 * - write 0x4400 + 0x0E 4232 * - sleep 10ms 4233 * - write 0x4410 + 0x0E 4234 * - sleep 1ms 4235 * - write 0x0E 4236 * read from GPIO_DATA into buf (uint_32) 4237 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 ) 4238 * error. ERROR_CPLD_Check_Failed. 4239 */ 4240/* ----------------------------------------------------------------------- */ 4241static void 4242init_RTV24 (struct bttv *btv) 4243{ 4244 uint32_t dataRead = 0; 4245 long watchdog_value = 0x0E; 4246 4247 pr_info("%d: Adlink RTV-24 initialisation in progress ...\n", 4248 btv->c.nr); 4249 4250 btwrite (0x00c3feff, BT848_GPIO_OUT_EN); 4251 4252 btwrite (0 + watchdog_value, BT848_GPIO_DATA); 4253 msleep (1); 4254 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA); 4255 msleep (10); 4256 btwrite (0 + watchdog_value, BT848_GPIO_DATA); 4257 4258 dataRead = btread (BT848_GPIO_DATA); 4259 4260 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) { 4261 pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n", 4262 btv->c.nr, dataRead); 4263 } 4264 4265 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA); 4266 msleep (10); 4267 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA); 4268 msleep (1); 4269 btwrite (watchdog_value, BT848_GPIO_DATA); 4270 msleep (1); 4271 dataRead = btread (BT848_GPIO_DATA); 4272 4273 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) { 4274 pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n", 4275 btv->c.nr, dataRead); 4276 4277 return; 4278 } 4279 4280 pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr); 4281} 4282 4283 4284 4285/* ----------------------------------------------------------------------- */ 4286/* 4287 * The PCI-8604PW contains a CPLD, probably an ispMACH 4A, that filters 4288 * the PCI REQ signals comming from the four BT878 chips. After power 4289 * up, the CPLD does not forward requests to the bus, which prevents 4290 * the BT878 from fetching RISC instructions from memory. While the 4291 * CPLD is connected to most of the GPIOs of PCI device 0xD, only 4292 * five appear to play a role in unlocking the REQ signal. The following 4293 * sequence has been determined by trial and error without access to the 4294 * original driver. 4295 * 4296 * Eight GPIOs of device 0xC are provided on connector CN4 (4 in, 4 out). 4297 * Devices 0xE and 0xF do not appear to have anything connected to their 4298 * GPIOs. 4299 * 4300 * The correct GPIO_OUT_EN value might have some more bits set. It should 4301 * be possible to derive it from a boundary scan of the CPLD. Its JTAG 4302 * pins are routed to test points. 4303 * 4304 */ 4305/* ----------------------------------------------------------------------- */ 4306static void 4307init_PCI8604PW(struct bttv *btv) 4308{ 4309 int state; 4310 4311 if ((PCI_SLOT(btv->c.pci->devfn) & ~3) != 0xC) { 4312 pr_warn("This is not a PCI-8604PW\n"); 4313 return; 4314 } 4315 4316 if (PCI_SLOT(btv->c.pci->devfn) != 0xD) 4317 return; 4318 4319 btwrite(0x080002, BT848_GPIO_OUT_EN); 4320 4321 state = (btread(BT848_GPIO_DATA) >> 21) & 7; 4322 4323 for (;;) { 4324 switch (state) { 4325 case 1: 4326 case 5: 4327 case 6: 4328 case 4: 4329 pr_debug("PCI-8604PW in state %i, toggling pin\n", 4330 state); 4331 btwrite(0x080000, BT848_GPIO_DATA); 4332 msleep(1); 4333 btwrite(0x000000, BT848_GPIO_DATA); 4334 msleep(1); 4335 break; 4336 case 7: 4337 pr_info("PCI-8604PW unlocked\n"); 4338 return; 4339 case 0: 4340 /* FIXME: If we are in state 7 and toggle GPIO[19] one 4341 more time, the CPLD goes into state 0, where PCI bus 4342 mastering is inhibited again. We have not managed to 4343 get out of that state. */ 4344 4345 pr_err("PCI-8604PW locked until reset\n"); 4346 return; 4347 default: 4348 pr_err("PCI-8604PW in unknown state %i\n", state); 4349 return; 4350 } 4351 4352 state = (state << 4) | ((btread(BT848_GPIO_DATA) >> 21) & 7); 4353 4354 switch (state) { 4355 case 0x15: 4356 case 0x56: 4357 case 0x64: 4358 case 0x47: 4359 /* The transition from state 7 to state 0 is, as explained 4360 above, valid but undesired and with this code impossible 4361 as we exit as soon as we are in state 7. 4362 case 0x70: */ 4363 break; 4364 default: 4365 pr_err("PCI-8604PW invalid transition %i -> %i\n", 4366 state >> 4, state & 7); 4367 return; 4368 } 4369 state &= 7; 4370 } 4371} 4372 4373/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas] 4374 * 4375 * This is needed because rv605 don't use a normal multiplex, but a crosspoint 4376 * switch instead (CD22M3494E). This IC can have multiple active connections 4377 * between Xn (input) and Yn (output) pins. We need to clear any existing 4378 * connection prior to establish a new one, pulsing the STROBE pin. 4379 * 4380 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. 4381 * GPIO pins are wired as: 4382 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller) 4383 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller) 4384 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller) 4385 * GPIO[8] - - P3[5] (microcontroller) 4386 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller) 4387 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller) 4388 * GPINTR - - P3[4] (microcontroller) 4389 * 4390 * The microcontroller is a 80C32 like. It should be possible to change xpoint 4391 * configuration either directly (as we are doing) or using the microcontroller 4392 * which is also wired to I2C interface. I have no further info on the 4393 * microcontroller features, one would need to disassembly the firmware. 4394 * note: the vendor refused to give any information on this product, all 4395 * that stuff was found using a multimeter! :) 4396 */ 4397static void rv605_muxsel(struct bttv *btv, unsigned int input) 4398{ 4399 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0, 4400 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa }; 4401 4402 gpio_bits(0x07f, muxgpio[input]); 4403 4404 /* reset all conections */ 4405 gpio_bits(0x200,0x200); 4406 mdelay(1); 4407 gpio_bits(0x200,0x000); 4408 mdelay(1); 4409 4410 /* create a new connection */ 4411 gpio_bits(0x480,0x480); 4412 mdelay(1); 4413 gpio_bits(0x480,0x080); 4414 mdelay(1); 4415} 4416 4417/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning] 4418 * 4419 * The CS16 (available on eBay cheap) is a PCI board with four Fusion 4420 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator 4421 * chips, ten eight input analog multiplexors, a not chip and a few 4422 * other components. 4423 * 4424 * 16 inputs on a secondary bracket are provided and can be selected 4425 * from each of the four capture chips. Two of the eight input 4426 * multiplexors are used to select from any of the 16 input signals. 4427 * 4428 * Unsupported hardware capabilities: 4429 * . A video output monitor on the secondary bracket can be selected from 4430 * one of the 878A chips. 4431 * . Another passthrough but I haven't spent any time investigating it. 4432 * . Digital I/O (logic level connected to GPIO) is available from an 4433 * onboard header. 4434 * 4435 * The on chip input mux should always be set to 2. 4436 * GPIO[16:19] - Video input selection 4437 * GPIO[0:3] - Video output monitor select (only available from one 878A) 4438 * GPIO[?:?] - Digital I/O. 4439 * 4440 * There is an ATMEL microcontroller with an 8031 core on board. I have not 4441 * determined what function (if any) it provides. With the microcontroller 4442 * and sync separator chips a guess is that it might have to do with video 4443 * switching and maybe some digital I/O. 4444 */ 4445static void tibetCS16_muxsel(struct bttv *btv, unsigned int input) 4446{ 4447 /* video mux */ 4448 gpio_bits(0x0f0000, input << 16); 4449} 4450 4451static void tibetCS16_init(struct bttv *btv) 4452{ 4453 /* enable gpio bits, mask obtained via btSpy */ 4454 gpio_inout(0xffffff, 0x0f7fff); 4455 gpio_write(0x0f7fff); 4456} 4457 4458/* 4459 * The following routines for the Kodicom-4400r get a little mind-twisting. 4460 * There is a "master" controller and three "slave" controllers, together 4461 * an analog switch which connects any of 16 cameras to any of the BT87A's. 4462 * The analog switch is controlled by the "master", but the detection order 4463 * of the four BT878A chips is in an order which I just don't understand. 4464 * The "master" is actually the second controller to be detected. The 4465 * logic on the board uses logical numbers for the 4 controllers, but 4466 * those numbers are different from the detection sequence. When working 4467 * with the analog switch, we need to "map" from the detection sequence 4468 * over to the board's logical controller number. This mapping sequence 4469 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical 4470 * unit 3, the second (which is the master) is logical unit 0, etc. 4471 * We need to maintain the status of the analog switch (which of the 16 4472 * cameras is connected to which of the 4 controllers) in sw_status array. 4473 */ 4474 4475/* 4476 * First a routine to set the analog switch, which controls which camera 4477 * is routed to which controller. The switch comprises an X-address 4478 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a 4479 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). 4480 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables 4481 * the switch. A STROBE bit (gpio bit 8) latches the data value into the 4482 * specified address. The idea is to set the address and data, then bring 4483 * STROBE high, and finally bring STROBE back to low. 4484 */ 4485static void kodicom4400r_write(struct bttv *btv, 4486 unsigned char xaddr, 4487 unsigned char yaddr, 4488 unsigned char data) { 4489 unsigned int udata; 4490 4491 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf); 4492 gpio_bits(0x1ff, udata); /* write ADDR and DAT */ 4493 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */ 4494 gpio_bits(0x1ff, udata); /* strobe low */ 4495} 4496 4497/* 4498 * Next the mux select. Both the "master" and "slave" 'cards' (controllers) 4499 * use this routine. The routine finds the "master" for the card, maps 4500 * the controller number from the detected position over to the logical 4501 * number, writes the appropriate data to the analog switch, and housekeeps 4502 * the local copy of the switch information. The parameter 'input' is the 4503 * requested camera number (0 - 15). 4504 */ 4505static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input) 4506{ 4507 int xaddr, yaddr; 4508 struct bttv *mctlr; 4509 static unsigned char map[4] = {3, 0, 2, 1}; 4510 4511 mctlr = master[btv->c.nr]; 4512 if (mctlr == NULL) { /* ignore if master not yet detected */ 4513 return; 4514 } 4515 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */ 4516 yaddr = map[yaddr]; 4517 xaddr = input & 0xf; 4518 /* Check if the controller/camera pair has changed, else ignore */ 4519 if (mctlr->sw_status[yaddr] != xaddr) 4520 { 4521 /* "open" the old switch, "close" the new one, save the new */ 4522 kodicom4400r_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0); 4523 mctlr->sw_status[yaddr] = xaddr; 4524 kodicom4400r_write(mctlr, xaddr, yaddr, 1); 4525 } 4526} 4527 4528/* 4529 * During initialisation, we need to reset the analog switch. We 4530 * also preset the switch to map the 4 connectors on the card to the 4531 * *user's* (see above description of kodicom4400r_muxsel) channels 4532 * 0 through 3 4533 */ 4534static void kodicom4400r_init(struct bttv *btv) 4535{ 4536 int ix; 4537 4538 gpio_inout(0x0003ff, 0x0003ff); 4539 gpio_write(1 << 9); /* reset MUX */ 4540 gpio_write(0); 4541 /* Preset camera 0 to the 4 controllers */ 4542 for (ix = 0; ix < 4; ix++) { 4543 btv->sw_status[ix] = ix; 4544 kodicom4400r_write(btv, ix, ix, 1); 4545 } 4546 /* 4547 * Since this is the "master", we need to set up the 4548 * other three controller chips' pointers to this structure 4549 * for later use in the muxsel routine. 4550 */ 4551 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3)) 4552 return; 4553 master[btv->c.nr-1] = btv; 4554 master[btv->c.nr] = btv; 4555 master[btv->c.nr+1] = btv; 4556 master[btv->c.nr+2] = btv; 4557} 4558 4559/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel 4560 * video multiplexers to provide up to 16 video inputs. These 4561 * multiplexers are controlled by the lower 8 GPIO pins of the 4562 * bt878. The multiplexers probably Pericom PI5V331Q or similar. 4563 4564 * xxx0 is pin xxx of multiplexer U5, 4565 * yyy1 is pin yyy of multiplexer U2 4566 */ 4567#define ENA0 0x01 4568#define ENB0 0x02 4569#define ENA1 0x04 4570#define ENB1 0x08 4571 4572#define IN10 0x10 4573#define IN00 0x20 4574#define IN11 0x40 4575#define IN01 0x80 4576 4577static void xguard_muxsel(struct bttv *btv, unsigned int input) 4578{ 4579 static const int masks[] = { 4580 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10, 4581 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10, 4582 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11, 4583 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11, 4584 }; 4585 gpio_write(masks[input%16]); 4586} 4587static void picolo_tetra_init(struct bttv *btv) 4588{ 4589 /*This is the video input redirection fonctionality : I DID NOT USED IT. */ 4590 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */ 4591 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/ 4592} 4593static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input) 4594{ 4595 4596 dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input); 4597 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/ 4598 /*GPIO[20]&GPIO[21] used to choose the right input*/ 4599 btwrite (input<<20,BT848_GPIO_DATA); 4600 4601} 4602 4603/* 4604 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>] 4605 * 4606 * The IVC120G security card has 4 i2c controlled TDA8540 matrix 4607 * swichers to provide 16 channels to MUX0. The TDA8540's have 4608 * 4 independent outputs and as such the IVC120G also has the 4609 * optional "Monitor Out" bus. This allows the card to be looking 4610 * at one input while the monitor is looking at another. 4611 * 4612 * Since I've couldn't be bothered figuring out how to add an 4613 * independent muxsel for the monitor bus, I've just set it to 4614 * whatever the card is looking at. 4615 * 4616 * OUT0 of the TDA8540's is connected to MUX0 (0x03) 4617 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C) 4618 * 4619 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03) 4620 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03) 4621 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03) 4622 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03) 4623 * 4624 */ 4625 4626/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */ 4627#define I2C_TDA8540 0x90 4628#define I2C_TDA8540_ALT1 0x92 4629#define I2C_TDA8540_ALT2 0x94 4630#define I2C_TDA8540_ALT3 0x96 4631#define I2C_TDA8540_ALT4 0x98 4632#define I2C_TDA8540_ALT5 0x9a 4633#define I2C_TDA8540_ALT6 0x9c 4634 4635static void ivc120_muxsel(struct bttv *btv, unsigned int input) 4636{ 4637 /* Simple maths */ 4638 int key = input % 4; 4639 int matrix = input / 4; 4640 4641 dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n", 4642 btv->c.nr, input, matrix, key); 4643 4644 /* Handles the input selection on the TDA8540's */ 4645 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00, 4646 ((matrix == 3) ? (key | key << 2) : 0x00), 1); 4647 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00, 4648 ((matrix == 0) ? (key | key << 2) : 0x00), 1); 4649 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00, 4650 ((matrix == 1) ? (key | key << 2) : 0x00), 1); 4651 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00, 4652 ((matrix == 2) ? (key | key << 2) : 0x00), 1); 4653 4654 /* Handles the output enables on the TDA8540's */ 4655 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02, 4656 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */ 4657 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02, 4658 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */ 4659 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02, 4660 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */ 4661 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02, 4662 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */ 4663 4664 /* 878's MUX0 is already selected for input via muxsel values */ 4665} 4666 4667 4668/* PXC200 muxsel helper 4669 * luke@syseng.anu.edu.au 4670 * another transplant 4671 * from Alessandro Rubini (rubini@linux.it) 4672 * 4673 * There are 4 kinds of cards: 4674 * PXC200L which is bt848 4675 * PXC200F which is bt848 with PIC controlling mux 4676 * PXC200AL which is bt878 4677 * PXC200AF which is bt878 with PIC controlling mux 4678 */ 4679#define PX_CFG_PXC200F 0x01 4680#define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */ 4681#define PX_I2C_PIC 0x0f 4682#define PX_PXC200A_CARDID 0x200a1295 4683#define PX_I2C_CMD_CFG 0x00 4684 4685static void PXC200_muxsel(struct bttv *btv, unsigned int input) 4686{ 4687 int rc; 4688 long mux; 4689 int bitmask; 4690 unsigned char buf[2]; 4691 4692 /* Read PIC config to determine if this is a PXC200F */ 4693 /* PX_I2C_CMD_CFG*/ 4694 buf[0]=0; 4695 buf[1]=0; 4696 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1); 4697 if (rc) { 4698 pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n", 4699 btv->c.nr, rc); 4700 /* not PXC ? do nothing */ 4701 return; 4702 } 4703 4704 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL); 4705 if (!(rc & PX_CFG_PXC200F)) { 4706 pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n", 4707 btv->c.nr, rc); 4708 return; 4709 } 4710 4711 4712 /* The multiplexer in the 200F is handled by the GPIO port */ 4713 /* get correct mapping between inputs */ 4714 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */ 4715 /* ** not needed!? */ 4716 mux = input; 4717 4718 /* make sure output pins are enabled */ 4719 /* bitmask=0x30f; */ 4720 bitmask=0x302; 4721 /* check whether we have a PXC200A */ 4722 if (btv->cardid == PX_PXC200A_CARDID) { 4723 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */ 4724 bitmask |= 7<<4; /* the DAC */ 4725 } 4726 btwrite(bitmask, BT848_GPIO_OUT_EN); 4727 4728 bitmask = btread(BT848_GPIO_DATA); 4729 if (btv->cardid == PX_PXC200A_CARDID) 4730 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7); 4731 else /* older device */ 4732 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8); 4733 btwrite(bitmask,BT848_GPIO_DATA); 4734 4735 /* 4736 * Was "to be safe, set the bt848 to input 0" 4737 * Actually, since it's ok at load time, better not messing 4738 * with these bits (on PXC200AF you need to set mux 2 here) 4739 * 4740 * needed because bttv-driver sets mux before calling this function 4741 */ 4742 if (btv->cardid == PX_PXC200A_CARDID) 4743 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM); 4744 else /* older device */ 4745 btand(~BT848_IFORM_MUXSEL,BT848_IFORM); 4746 4747 pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux); 4748} 4749 4750static void phytec_muxsel(struct bttv *btv, unsigned int input) 4751{ 4752 unsigned int mux = input % 4; 4753 4754 if (input == btv->svhs) 4755 mux = 0; 4756 4757 gpio_bits(0x3, mux); 4758} 4759 4760/* 4761 * GeoVision GV-800(S) functions 4762 * Bruno Christo <bchristo@inf.ufsm.br> 4763*/ 4764 4765/* This is a function to control the analog switch, which determines which 4766 * camera is routed to which controller. The switch comprises an X-address 4767 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a 4768 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). 4769 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables 4770 * the switch. A STROBE bit (gpio bit 17) latches the data value into the 4771 * specified address. There is also a chip select (gpio bit 16). 4772 * The idea is to set the address and chip select together, bring 4773 * STROBE high, write the data, and finally bring STROBE back to low. 4774 */ 4775static void gv800s_write(struct bttv *btv, 4776 unsigned char xaddr, 4777 unsigned char yaddr, 4778 unsigned char data) { 4779 /* On the "master" 878A: 4780 * GPIO bits 0-9 are used for the analog switch: 4781 * 00 - 03: camera selector 4782 * 04 - 06: 878A (controller) selector 4783 * 16: cselect 4784 * 17: strobe 4785 * 18: data (1->on, 0->off) 4786 * 19: reset 4787 */ 4788 const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4); 4789 const u32 CSELECT = 1<<16; 4790 const u32 STROBE = 1<<17; 4791 const u32 DATA = data<<18; 4792 4793 gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */ 4794 gpio_bits(0x20000, STROBE); /* STROBE high */ 4795 gpio_bits(0x40000, DATA); /* write DATA */ 4796 gpio_bits(0x20000, ~STROBE); /* STROBE low */ 4797} 4798 4799/* 4800 * GeoVision GV-800(S) muxsel 4801 * 4802 * Each of the 4 cards (controllers) use this function. 4803 * The controller using this function selects the input through the GPIO pins 4804 * of the "master" card. A pointer to this card is stored in master[btv->c.nr]. 4805 * 4806 * The parameter 'input' is the requested camera number (0-4) on the controller. 4807 * The map array has the address of each input. Note that the addresses in the 4808 * array are in the sequence the original GeoVision driver uses, that is, set 4809 * every controller to input 0, then to input 1, 2, 3, repeat. This means that 4810 * the physical "camera 1" connector corresponds to controller 0 input 0, 4811 * "camera 2" corresponds to controller 1 input 0, and so on. 4812 * 4813 * After getting the input address, the function then writes the appropriate 4814 * data to the analog switch, and housekeeps the local copy of the switch 4815 * information. 4816 */ 4817static void gv800s_muxsel(struct bttv *btv, unsigned int input) 4818{ 4819 struct bttv *mctlr; 4820 int xaddr, yaddr; 4821 static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 }, 4822 { 0x1, 0x5, 0xb, 0x7 }, 4823 { 0x2, 0x8, 0xc, 0xe }, 4824 { 0x3, 0x9, 0xd, 0xf } }; 4825 input = input%4; 4826 mctlr = master[btv->c.nr]; 4827 if (mctlr == NULL) { 4828 /* do nothing until the "master" is detected */ 4829 return; 4830 } 4831 yaddr = (btv->c.nr - mctlr->c.nr) & 3; 4832 xaddr = map[yaddr][input] & 0xf; 4833 4834 /* Check if the controller/camera pair has changed, ignore otherwise */ 4835 if (mctlr->sw_status[yaddr] != xaddr) { 4836 /* disable the old switch, enable the new one and save status */ 4837 gv800s_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0); 4838 mctlr->sw_status[yaddr] = xaddr; 4839 gv800s_write(mctlr, xaddr, yaddr, 1); 4840 } 4841} 4842 4843/* GeoVision GV-800(S) "master" chip init */ 4844static void gv800s_init(struct bttv *btv) 4845{ 4846 int ix; 4847 4848 gpio_inout(0xf107f, 0xf107f); 4849 gpio_write(1<<19); /* reset the analog MUX */ 4850 gpio_write(0); 4851 4852 /* Preset camera 0 to the 4 controllers */ 4853 for (ix = 0; ix < 4; ix++) { 4854 btv->sw_status[ix] = ix; 4855 gv800s_write(btv, ix, ix, 1); 4856 } 4857 4858 /* Inputs on the "master" controller need this brightness fix */ 4859 bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1); 4860 4861 if (btv->c.nr > BTTV_MAX-4) 4862 return; 4863 /* 4864 * Store the "master" controller pointer in the master 4865 * array for later use in the muxsel function. 4866 */ 4867 master[btv->c.nr] = btv; 4868 master[btv->c.nr+1] = btv; 4869 master[btv->c.nr+2] = btv; 4870 master[btv->c.nr+3] = btv; 4871} 4872 4873/* ----------------------------------------------------------------------- */ 4874/* motherboard chipset specific stuff */ 4875 4876void __init bttv_check_chipset(void) 4877{ 4878 int pcipci_fail = 0; 4879 struct pci_dev *dev = NULL; 4880 4881 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */ 4882 pcipci_fail = 1; 4883 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF)) 4884 triton1 = 1; 4885 if (pci_pci_problems & PCIPCI_VSFX) 4886 vsfx = 1; 4887#ifdef PCIPCI_ALIMAGIK 4888 if (pci_pci_problems & PCIPCI_ALIMAGIK) 4889 latency = 0x0A; 4890#endif 4891 4892 4893 /* print warnings about any quirks found */ 4894 if (triton1) 4895 pr_info("Host bridge needs ETBF enabled\n"); 4896 if (vsfx) 4897 pr_info("Host bridge needs VSFX enabled\n"); 4898 if (pcipci_fail) { 4899 pr_info("bttv and your chipset may not work together\n"); 4900 if (!no_overlay) { 4901 pr_info("overlay will be disabled\n"); 4902 no_overlay = 1; 4903 } else { 4904 pr_info("overlay forced. Use this option at your own risk.\n"); 4905 } 4906 } 4907 if (UNSET != latency) 4908 pr_info("pci latency fixup [%d]\n", latency); 4909 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL, 4910 PCI_DEVICE_ID_INTEL_82441, dev))) { 4911 unsigned char b; 4912 pci_read_config_byte(dev, 0x53, &b); 4913 if (bttv_debug) 4914 pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n", 4915 b); 4916 } 4917} 4918 4919int bttv_handle_chipset(struct bttv *btv) 4920{ 4921 unsigned char command; 4922 4923 if (!triton1 && !vsfx && UNSET == latency) 4924 return 0; 4925 4926 if (bttv_verbose) { 4927 if (triton1) 4928 pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n", 4929 btv->c.nr); 4930 if (vsfx && btv->id >= 878) 4931 pr_info("%d: enabling VSFX\n", btv->c.nr); 4932 if (UNSET != latency) 4933 pr_info("%d: setting pci timer to %d\n", 4934 btv->c.nr, latency); 4935 } 4936 4937 if (btv->id < 878) { 4938 /* bt848 (mis)uses a bit in the irq mask for etbf */ 4939 if (triton1) 4940 btv->triton1 = BT848_INT_ETBF; 4941 } else { 4942 /* bt878 has a bit in the pci config space for it */ 4943 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command); 4944 if (triton1) 4945 command |= BT878_EN_TBFX; 4946 if (vsfx) 4947 command |= BT878_EN_VSFX; 4948 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command); 4949 } 4950 if (UNSET != latency) 4951 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency); 4952 return 0; 4953} 4954