1/* 2 * 3 * handle saa7134 IR remotes via linux kernel input layer. 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2 of the License, or 8 * (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 18 * 19 */ 20 21#include <linux/module.h> 22#include <linux/init.h> 23#include <linux/delay.h> 24#include <linux/interrupt.h> 25#include <linux/slab.h> 26 27#include "saa7134-reg.h" 28#include "saa7134.h" 29 30#define MODULE_NAME "saa7134" 31 32static unsigned int disable_ir; 33module_param(disable_ir, int, 0444); 34MODULE_PARM_DESC(disable_ir,"disable infrared remote support"); 35 36static unsigned int ir_debug; 37module_param(ir_debug, int, 0644); 38MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]"); 39 40static int pinnacle_remote; 41module_param(pinnacle_remote, int, 0644); /* Choose Pinnacle PCTV remote */ 42MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=grey (defaults to 0)"); 43 44#define dprintk(fmt, arg...) if (ir_debug) \ 45 printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg) 46#define i2cdprintk(fmt, arg...) if (ir_debug) \ 47 printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg) 48 49/* Helper function for raw decoding at GPIO16 or GPIO18 */ 50static int saa7134_raw_decode_irq(struct saa7134_dev *dev); 51 52/* -------------------- GPIO generic keycode builder -------------------- */ 53 54static int build_key(struct saa7134_dev *dev) 55{ 56 struct saa7134_card_ir *ir = dev->remote; 57 u32 gpio, data; 58 59 /* here comes the additional handshake steps for some cards */ 60 switch (dev->board) { 61 case SAA7134_BOARD_GOTVIEW_7135: 62 saa_setb(SAA7134_GPIO_GPSTATUS1, 0x80); 63 saa_clearb(SAA7134_GPIO_GPSTATUS1, 0x80); 64 break; 65 } 66 /* rising SAA7134_GPIO_GPRESCAN reads the status */ 67 saa_clearb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN); 68 saa_setb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN); 69 70 gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); 71 if (ir->polling) { 72 if (ir->last_gpio == gpio) 73 return 0; 74 ir->last_gpio = gpio; 75 } 76 77 data = ir_extract_bits(gpio, ir->mask_keycode); 78 dprintk("build_key gpio=0x%x mask=0x%x data=%d\n", 79 gpio, ir->mask_keycode, data); 80 81 switch (dev->board) { 82 case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG: 83 if (data == ir->mask_keycode) 84 rc_keyup(ir->dev); 85 else 86 rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0); 87 return 0; 88 } 89 90 if (ir->polling) { 91 if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) || 92 (ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) { 93 rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0); 94 } else { 95 rc_keyup(ir->dev); 96 } 97 } 98 else { /* IRQ driven mode - handle key press and release in one go */ 99 if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) || 100 (ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) { 101 rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0); 102 rc_keyup(ir->dev); 103 } 104 } 105 106 return 0; 107} 108 109/* --------------------- Chip specific I2C key builders ----------------- */ 110 111static int get_key_flydvb_trio(struct IR_i2c *ir, enum rc_type *protocol, 112 u32 *scancode, u8 *toggle) 113{ 114 int gpio; 115 int attempt = 0; 116 unsigned char b; 117 118 /* We need this to access GPI Used by the saa_readl macro. */ 119 struct saa7134_dev *dev = ir->c->adapter->algo_data; 120 121 if (dev == NULL) { 122 i2cdprintk("get_key_flydvb_trio: " 123 "ir->c->adapter->algo_data is NULL!\n"); 124 return -EIO; 125 } 126 127 /* rising SAA7134_GPIGPRESCAN reads the status */ 128 saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); 129 saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); 130 131 gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); 132 133 if (0x40000 & ~gpio) 134 return 0; /* No button press */ 135 136 /* poll IR chip */ 137 /* weak up the IR chip */ 138 b = 0; 139 140 while (1 != i2c_master_send(ir->c, &b, 1)) { 141 if ((attempt++) < 10) { 142 /* 143 * wait a bit for next attempt - 144 * I don't know how make it better 145 */ 146 msleep(10); 147 continue; 148 } 149 i2cdprintk("send wake up byte to pic16C505 (IR chip)" 150 "failed %dx\n", attempt); 151 return -EIO; 152 } 153 if (1 != i2c_master_recv(ir->c, &b, 1)) { 154 i2cdprintk("read error\n"); 155 return -EIO; 156 } 157 158 *protocol = RC_TYPE_UNKNOWN; 159 *scancode = b; 160 *toggle = 0; 161 return 1; 162} 163 164static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, enum rc_type *protocol, 165 u32 *scancode, u8 *toggle) 166{ 167 unsigned char b; 168 int gpio; 169 170 /* <dev> is needed to access GPIO. Used by the saa_readl macro. */ 171 struct saa7134_dev *dev = ir->c->adapter->algo_data; 172 if (dev == NULL) { 173 i2cdprintk("get_key_msi_tvanywhere_plus: " 174 "ir->c->adapter->algo_data is NULL!\n"); 175 return -EIO; 176 } 177 178 /* rising SAA7134_GPIO_GPRESCAN reads the status */ 179 180 saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); 181 saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); 182 183 gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); 184 185 /* GPIO&0x40 is pulsed low when a button is pressed. Don't do 186 I2C receive if gpio&0x40 is not low. */ 187 188 if (gpio & 0x40) 189 return 0; /* No button press */ 190 191 /* GPIO says there is a button press. Get it. */ 192 193 if (1 != i2c_master_recv(ir->c, &b, 1)) { 194 i2cdprintk("read error\n"); 195 return -EIO; 196 } 197 198 /* No button press */ 199 200 if (b == 0xff) 201 return 0; 202 203 /* Button pressed */ 204 205 dprintk("get_key_msi_tvanywhere_plus: Key = 0x%02X\n", b); 206 *protocol = RC_TYPE_UNKNOWN; 207 *scancode = b; 208 *toggle = 0; 209 return 1; 210} 211 212/* copied and modified from get_key_msi_tvanywhere_plus() */ 213static int get_key_kworld_pc150u(struct IR_i2c *ir, enum rc_type *protocol, 214 u32 *scancode, u8 *toggle) 215{ 216 unsigned char b; 217 unsigned int gpio; 218 219 /* <dev> is needed to access GPIO. Used by the saa_readl macro. */ 220 struct saa7134_dev *dev = ir->c->adapter->algo_data; 221 if (dev == NULL) { 222 i2cdprintk("get_key_kworld_pc150u: " 223 "ir->c->adapter->algo_data is NULL!\n"); 224 return -EIO; 225 } 226 227 /* rising SAA7134_GPIO_GPRESCAN reads the status */ 228 229 saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); 230 saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); 231 232 gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); 233 234 /* GPIO&0x100 is pulsed low when a button is pressed. Don't do 235 I2C receive if gpio&0x100 is not low. */ 236 237 if (gpio & 0x100) 238 return 0; /* No button press */ 239 240 /* GPIO says there is a button press. Get it. */ 241 242 if (1 != i2c_master_recv(ir->c, &b, 1)) { 243 i2cdprintk("read error\n"); 244 return -EIO; 245 } 246 247 /* No button press */ 248 249 if (b == 0xff) 250 return 0; 251 252 /* Button pressed */ 253 254 dprintk("get_key_kworld_pc150u: Key = 0x%02X\n", b); 255 *protocol = RC_TYPE_UNKNOWN; 256 *scancode = b; 257 *toggle = 0; 258 return 1; 259} 260 261static int get_key_purpletv(struct IR_i2c *ir, enum rc_type *protocol, 262 u32 *scancode, u8 *toggle) 263{ 264 unsigned char b; 265 266 /* poll IR chip */ 267 if (1 != i2c_master_recv(ir->c, &b, 1)) { 268 i2cdprintk("read error\n"); 269 return -EIO; 270 } 271 272 /* no button press */ 273 if (b==0) 274 return 0; 275 276 /* repeating */ 277 if (b & 0x80) 278 return 1; 279 280 *protocol = RC_TYPE_UNKNOWN; 281 *scancode = b; 282 *toggle = 0; 283 return 1; 284} 285 286static int get_key_hvr1110(struct IR_i2c *ir, enum rc_type *protocol, 287 u32 *scancode, u8 *toggle) 288{ 289 unsigned char buf[5]; 290 291 /* poll IR chip */ 292 if (5 != i2c_master_recv(ir->c, buf, 5)) 293 return -EIO; 294 295 /* Check if some key were pressed */ 296 if (!(buf[0] & 0x80)) 297 return 0; 298 299 /* 300 * buf[3] & 0x80 is always high. 301 * buf[3] & 0x40 is a parity bit. A repeat event is marked 302 * by preserving it into two separate readings 303 * buf[4] bits 0 and 1, and buf[1] and buf[2] are always 304 * zero. 305 * 306 * Note that the keymap which the hvr1110 uses is RC5. 307 * 308 * FIXME: start bits could maybe be used...? 309 */ 310 *protocol = RC_TYPE_RC5; 311 *scancode = RC_SCANCODE_RC5(buf[3] & 0x1f, buf[4] >> 2); 312 *toggle = !!(buf[3] & 0x40); 313 return 1; 314} 315 316 317static int get_key_beholdm6xx(struct IR_i2c *ir, enum rc_type *protocol, 318 u32 *scancode, u8 *toggle) 319{ 320 unsigned char data[12]; 321 u32 gpio; 322 323 struct saa7134_dev *dev = ir->c->adapter->algo_data; 324 325 /* rising SAA7134_GPIO_GPRESCAN reads the status */ 326 saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); 327 saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); 328 329 gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); 330 331 if (0x400000 & ~gpio) 332 return 0; /* No button press */ 333 334 ir->c->addr = 0x5a >> 1; 335 336 if (12 != i2c_master_recv(ir->c, data, 12)) { 337 i2cdprintk("read error\n"); 338 return -EIO; 339 } 340 341 if (data[9] != (unsigned char)(~data[8])) 342 return 0; 343 344 *protocol = RC_TYPE_NEC; 345 *scancode = RC_SCANCODE_NECX(data[11] << 8 | data[10], data[9]); 346 *toggle = 0; 347 return 1; 348} 349 350/* Common (grey or coloured) pinnacle PCTV remote handling 351 * 352 */ 353static int get_key_pinnacle(struct IR_i2c *ir, enum rc_type *protocol, 354 u32 *scancode, u8 *toggle, int parity_offset, 355 int marker, int code_modulo) 356{ 357 unsigned char b[4]; 358 unsigned int start = 0,parity = 0,code = 0; 359 360 /* poll IR chip */ 361 if (4 != i2c_master_recv(ir->c, b, 4)) { 362 i2cdprintk("read error\n"); 363 return -EIO; 364 } 365 366 for (start = 0; start < ARRAY_SIZE(b); start++) { 367 if (b[start] == marker) { 368 code=b[(start+parity_offset + 1) % 4]; 369 parity=b[(start+parity_offset) % 4]; 370 } 371 } 372 373 /* Empty Request */ 374 if (parity == 0) 375 return 0; 376 377 /* Repeating... */ 378 if (ir->old == parity) 379 return 0; 380 381 ir->old = parity; 382 383 /* drop special codes when a key is held down a long time for the grey controller 384 In this case, the second bit of the code is asserted */ 385 if (marker == 0xfe && (code & 0x40)) 386 return 0; 387 388 code %= code_modulo; 389 390 *protocol = RC_TYPE_UNKNOWN; 391 *scancode = code; 392 *toggle = 0; 393 394 i2cdprintk("Pinnacle PCTV key %02x\n", code); 395 return 1; 396} 397 398/* The grey pinnacle PCTV remote 399 * 400 * There are one issue with this remote: 401 * - I2c packet does not change when the same key is pressed quickly. The workaround 402 * is to hold down each key for about half a second, so that another code is generated 403 * in the i2c packet, and the function can distinguish key presses. 404 * 405 * Sylvain Pasche <sylvain.pasche@gmail.com> 406 */ 407static int get_key_pinnacle_grey(struct IR_i2c *ir, enum rc_type *protocol, 408 u32 *scancode, u8 *toggle) 409{ 410 411 return get_key_pinnacle(ir, protocol, scancode, toggle, 1, 0xfe, 0xff); 412} 413 414 415/* The new pinnacle PCTV remote (with the colored buttons) 416 * 417 * Ricardo Cerqueira <v4l@cerqueira.org> 418 */ 419static int get_key_pinnacle_color(struct IR_i2c *ir, enum rc_type *protocol, 420 u32 *scancode, u8 *toggle) 421{ 422 /* code_modulo parameter (0x88) is used to reduce code value to fit inside IR_KEYTAB_SIZE 423 * 424 * this is the only value that results in 42 unique 425 * codes < 128 426 */ 427 428 return get_key_pinnacle(ir, protocol, scancode, toggle, 2, 0x80, 0x88); 429} 430 431void saa7134_input_irq(struct saa7134_dev *dev) 432{ 433 struct saa7134_card_ir *ir; 434 435 if (!dev || !dev->remote) 436 return; 437 438 ir = dev->remote; 439 if (!ir->running) 440 return; 441 442 if (!ir->polling && !ir->raw_decode) { 443 build_key(dev); 444 } else if (ir->raw_decode) { 445 saa7134_raw_decode_irq(dev); 446 } 447} 448 449static void saa7134_input_timer(unsigned long data) 450{ 451 struct saa7134_dev *dev = (struct saa7134_dev *)data; 452 struct saa7134_card_ir *ir = dev->remote; 453 454 build_key(dev); 455 mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling)); 456} 457 458static void ir_raw_decode_timer_end(unsigned long data) 459{ 460 struct saa7134_dev *dev = (struct saa7134_dev *)data; 461 462 ir_raw_event_handle(dev->remote->dev); 463} 464 465static int __saa7134_ir_start(void *priv) 466{ 467 struct saa7134_dev *dev = priv; 468 struct saa7134_card_ir *ir; 469 470 if (!dev || !dev->remote) 471 return -EINVAL; 472 473 ir = dev->remote; 474 if (ir->running) 475 return 0; 476 477 /* Moved here from saa7134_input_init1() because the latter 478 * is not called on device resume */ 479 switch (dev->board) { 480 case SAA7134_BOARD_MD2819: 481 case SAA7134_BOARD_KWORLD_VSTREAM_XPERT: 482 case SAA7134_BOARD_AVERMEDIA_305: 483 case SAA7134_BOARD_AVERMEDIA_307: 484 case SAA7134_BOARD_AVERMEDIA_STUDIO_305: 485 case SAA7134_BOARD_AVERMEDIA_STUDIO_505: 486 case SAA7134_BOARD_AVERMEDIA_STUDIO_307: 487 case SAA7134_BOARD_AVERMEDIA_STUDIO_507: 488 case SAA7134_BOARD_AVERMEDIA_STUDIO_507UA: 489 case SAA7134_BOARD_AVERMEDIA_GO_007_FM: 490 case SAA7134_BOARD_AVERMEDIA_M102: 491 case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS: 492 /* Without this we won't receive key up events */ 493 saa_setb(SAA7134_GPIO_GPMODE0, 0x4); 494 saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4); 495 break; 496 case SAA7134_BOARD_AVERMEDIA_777: 497 case SAA7134_BOARD_AVERMEDIA_A16AR: 498 /* Without this we won't receive key up events */ 499 saa_setb(SAA7134_GPIO_GPMODE1, 0x1); 500 saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); 501 break; 502 case SAA7134_BOARD_AVERMEDIA_A16D: 503 /* Without this we won't receive key up events */ 504 saa_setb(SAA7134_GPIO_GPMODE1, 0x1); 505 saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); 506 break; 507 case SAA7134_BOARD_GOTVIEW_7135: 508 saa_setb(SAA7134_GPIO_GPMODE1, 0x80); 509 break; 510 } 511 512 ir->running = true; 513 514 if (ir->polling) { 515 setup_timer(&ir->timer, saa7134_input_timer, 516 (unsigned long)dev); 517 ir->timer.expires = jiffies + HZ; 518 add_timer(&ir->timer); 519 } else if (ir->raw_decode) { 520 /* set timer_end for code completion */ 521 setup_timer(&ir->timer, ir_raw_decode_timer_end, 522 (unsigned long)dev); 523 } 524 525 return 0; 526} 527 528static void __saa7134_ir_stop(void *priv) 529{ 530 struct saa7134_dev *dev = priv; 531 struct saa7134_card_ir *ir; 532 533 if (!dev || !dev->remote) 534 return; 535 536 ir = dev->remote; 537 if (!ir->running) 538 return; 539 540 if (ir->polling || ir->raw_decode) 541 del_timer_sync(&ir->timer); 542 543 ir->running = false; 544 545 return; 546} 547 548int saa7134_ir_start(struct saa7134_dev *dev) 549{ 550 if (dev->remote->users) 551 return __saa7134_ir_start(dev); 552 553 return 0; 554} 555 556void saa7134_ir_stop(struct saa7134_dev *dev) 557{ 558 if (dev->remote->users) 559 __saa7134_ir_stop(dev); 560} 561 562static int saa7134_ir_open(struct rc_dev *rc) 563{ 564 struct saa7134_dev *dev = rc->priv; 565 566 dev->remote->users++; 567 return __saa7134_ir_start(dev); 568} 569 570static void saa7134_ir_close(struct rc_dev *rc) 571{ 572 struct saa7134_dev *dev = rc->priv; 573 574 dev->remote->users--; 575 if (!dev->remote->users) 576 __saa7134_ir_stop(dev); 577} 578 579int saa7134_input_init1(struct saa7134_dev *dev) 580{ 581 struct saa7134_card_ir *ir; 582 struct rc_dev *rc; 583 char *ir_codes = NULL; 584 u32 mask_keycode = 0; 585 u32 mask_keydown = 0; 586 u32 mask_keyup = 0; 587 unsigned polling = 0; 588 bool raw_decode = false; 589 int err; 590 591 if (dev->has_remote != SAA7134_REMOTE_GPIO) 592 return -ENODEV; 593 if (disable_ir) 594 return -ENODEV; 595 596 /* detect & configure */ 597 switch (dev->board) { 598 case SAA7134_BOARD_FLYVIDEO2000: 599 case SAA7134_BOARD_FLYVIDEO3000: 600 case SAA7134_BOARD_FLYTVPLATINUM_FM: 601 case SAA7134_BOARD_FLYTVPLATINUM_MINI2: 602 case SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM: 603 ir_codes = RC_MAP_FLYVIDEO; 604 mask_keycode = 0xEC00000; 605 mask_keydown = 0x0040000; 606 break; 607 case SAA7134_BOARD_CINERGY400: 608 case SAA7134_BOARD_CINERGY600: 609 case SAA7134_BOARD_CINERGY600_MK3: 610 ir_codes = RC_MAP_CINERGY; 611 mask_keycode = 0x00003f; 612 mask_keyup = 0x040000; 613 break; 614 case SAA7134_BOARD_ECS_TVP3XP: 615 case SAA7134_BOARD_ECS_TVP3XP_4CB5: 616 ir_codes = RC_MAP_EZTV; 617 mask_keycode = 0x00017c; 618 mask_keyup = 0x000002; 619 polling = 50; // ms 620 break; 621 case SAA7134_BOARD_KWORLD_XPERT: 622 case SAA7134_BOARD_AVACSSMARTTV: 623 ir_codes = RC_MAP_PIXELVIEW; 624 mask_keycode = 0x00001F; 625 mask_keyup = 0x000020; 626 polling = 50; // ms 627 break; 628 case SAA7134_BOARD_MD2819: 629 case SAA7134_BOARD_KWORLD_VSTREAM_XPERT: 630 case SAA7134_BOARD_AVERMEDIA_305: 631 case SAA7134_BOARD_AVERMEDIA_307: 632 case SAA7134_BOARD_AVERMEDIA_STUDIO_305: 633 case SAA7134_BOARD_AVERMEDIA_STUDIO_505: 634 case SAA7134_BOARD_AVERMEDIA_STUDIO_307: 635 case SAA7134_BOARD_AVERMEDIA_STUDIO_507: 636 case SAA7134_BOARD_AVERMEDIA_STUDIO_507UA: 637 case SAA7134_BOARD_AVERMEDIA_GO_007_FM: 638 case SAA7134_BOARD_AVERMEDIA_M102: 639 case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS: 640 ir_codes = RC_MAP_AVERMEDIA; 641 mask_keycode = 0x0007C8; 642 mask_keydown = 0x000010; 643 polling = 50; // ms 644 /* GPIO stuff moved to __saa7134_ir_start() */ 645 break; 646 case SAA7134_BOARD_AVERMEDIA_M135A: 647 ir_codes = RC_MAP_AVERMEDIA_M135A; 648 mask_keydown = 0x0040000; /* Enable GPIO18 line on both edges */ 649 mask_keyup = 0x0040000; 650 mask_keycode = 0xffff; 651 raw_decode = true; 652 break; 653 case SAA7134_BOARD_AVERMEDIA_M733A: 654 ir_codes = RC_MAP_AVERMEDIA_M733A_RM_K6; 655 mask_keydown = 0x0040000; 656 mask_keyup = 0x0040000; 657 mask_keycode = 0xffff; 658 raw_decode = true; 659 break; 660 case SAA7134_BOARD_AVERMEDIA_777: 661 case SAA7134_BOARD_AVERMEDIA_A16AR: 662 ir_codes = RC_MAP_AVERMEDIA; 663 mask_keycode = 0x02F200; 664 mask_keydown = 0x000400; 665 polling = 50; // ms 666 /* GPIO stuff moved to __saa7134_ir_start() */ 667 break; 668 case SAA7134_BOARD_AVERMEDIA_A16D: 669 ir_codes = RC_MAP_AVERMEDIA_A16D; 670 mask_keycode = 0x02F200; 671 mask_keydown = 0x000400; 672 polling = 50; /* ms */ 673 /* GPIO stuff moved to __saa7134_ir_start() */ 674 break; 675 case SAA7134_BOARD_KWORLD_TERMINATOR: 676 ir_codes = RC_MAP_PIXELVIEW; 677 mask_keycode = 0x00001f; 678 mask_keyup = 0x000060; 679 polling = 50; // ms 680 break; 681 case SAA7134_BOARD_MANLI_MTV001: 682 case SAA7134_BOARD_MANLI_MTV002: 683 ir_codes = RC_MAP_MANLI; 684 mask_keycode = 0x001f00; 685 mask_keyup = 0x004000; 686 polling = 50; /* ms */ 687 break; 688 case SAA7134_BOARD_BEHOLD_409FM: 689 case SAA7134_BOARD_BEHOLD_401: 690 case SAA7134_BOARD_BEHOLD_403: 691 case SAA7134_BOARD_BEHOLD_403FM: 692 case SAA7134_BOARD_BEHOLD_405: 693 case SAA7134_BOARD_BEHOLD_405FM: 694 case SAA7134_BOARD_BEHOLD_407: 695 case SAA7134_BOARD_BEHOLD_407FM: 696 case SAA7134_BOARD_BEHOLD_409: 697 case SAA7134_BOARD_BEHOLD_505FM: 698 case SAA7134_BOARD_BEHOLD_505RDS_MK5: 699 case SAA7134_BOARD_BEHOLD_505RDS_MK3: 700 case SAA7134_BOARD_BEHOLD_507_9FM: 701 case SAA7134_BOARD_BEHOLD_507RDS_MK3: 702 case SAA7134_BOARD_BEHOLD_507RDS_MK5: 703 ir_codes = RC_MAP_MANLI; 704 mask_keycode = 0x003f00; 705 mask_keyup = 0x004000; 706 polling = 50; /* ms */ 707 break; 708 case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM: 709 ir_codes = RC_MAP_BEHOLD_COLUMBUS; 710 mask_keycode = 0x003f00; 711 mask_keyup = 0x004000; 712 polling = 50; // ms 713 break; 714 case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS: 715 ir_codes = RC_MAP_PCTV_SEDNA; 716 mask_keycode = 0x001f00; 717 mask_keyup = 0x004000; 718 polling = 50; // ms 719 break; 720 case SAA7134_BOARD_GOTVIEW_7135: 721 ir_codes = RC_MAP_GOTVIEW7135; 722 mask_keycode = 0x0003CC; 723 mask_keydown = 0x000010; 724 polling = 5; /* ms */ 725 /* GPIO stuff moved to __saa7134_ir_start() */ 726 break; 727 case SAA7134_BOARD_VIDEOMATE_TV_PVR: 728 case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS: 729 case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII: 730 ir_codes = RC_MAP_VIDEOMATE_TV_PVR; 731 mask_keycode = 0x00003F; 732 mask_keyup = 0x400000; 733 polling = 50; // ms 734 break; 735 case SAA7134_BOARD_PROTEUS_2309: 736 ir_codes = RC_MAP_PROTEUS_2309; 737 mask_keycode = 0x00007F; 738 mask_keyup = 0x000080; 739 polling = 50; // ms 740 break; 741 case SAA7134_BOARD_VIDEOMATE_DVBT_300: 742 case SAA7134_BOARD_VIDEOMATE_DVBT_200: 743 ir_codes = RC_MAP_VIDEOMATE_TV_PVR; 744 mask_keycode = 0x003F00; 745 mask_keyup = 0x040000; 746 break; 747 case SAA7134_BOARD_FLYDVBS_LR300: 748 case SAA7134_BOARD_FLYDVBT_LR301: 749 case SAA7134_BOARD_FLYDVBTDUO: 750 ir_codes = RC_MAP_FLYDVB; 751 mask_keycode = 0x0001F00; 752 mask_keydown = 0x0040000; 753 break; 754 case SAA7134_BOARD_ASUSTeK_P7131_DUAL: 755 case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: 756 case SAA7134_BOARD_ASUSTeK_P7131_ANALOG: 757 ir_codes = RC_MAP_ASUS_PC39; 758 mask_keydown = 0x0040000; /* Enable GPIO18 line on both edges */ 759 mask_keyup = 0x0040000; 760 mask_keycode = 0xffff; 761 raw_decode = true; 762 break; 763 case SAA7134_BOARD_ASUSTeK_PS3_100: 764 ir_codes = RC_MAP_ASUS_PS3_100; 765 mask_keydown = 0x0040000; 766 mask_keyup = 0x0040000; 767 mask_keycode = 0xffff; 768 raw_decode = true; 769 break; 770 case SAA7134_BOARD_ENCORE_ENLTV: 771 case SAA7134_BOARD_ENCORE_ENLTV_FM: 772 ir_codes = RC_MAP_ENCORE_ENLTV; 773 mask_keycode = 0x00007f; 774 mask_keyup = 0x040000; 775 polling = 50; // ms 776 break; 777 case SAA7134_BOARD_ENCORE_ENLTV_FM53: 778 case SAA7134_BOARD_ENCORE_ENLTV_FM3: 779 ir_codes = RC_MAP_ENCORE_ENLTV_FM53; 780 mask_keydown = 0x0040000; /* Enable GPIO18 line on both edges */ 781 mask_keyup = 0x0040000; 782 mask_keycode = 0xffff; 783 raw_decode = true; 784 break; 785 case SAA7134_BOARD_10MOONSTVMASTER3: 786 ir_codes = RC_MAP_ENCORE_ENLTV; 787 mask_keycode = 0x5f80000; 788 mask_keyup = 0x8000000; 789 polling = 50; //ms 790 break; 791 case SAA7134_BOARD_GENIUS_TVGO_A11MCE: 792 ir_codes = RC_MAP_GENIUS_TVGO_A11MCE; 793 mask_keycode = 0xff; 794 mask_keydown = 0xf00000; 795 polling = 50; /* ms */ 796 break; 797 case SAA7134_BOARD_REAL_ANGEL_220: 798 ir_codes = RC_MAP_REAL_AUDIO_220_32_KEYS; 799 mask_keycode = 0x3f00; 800 mask_keyup = 0x4000; 801 polling = 50; /* ms */ 802 break; 803 case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG: 804 ir_codes = RC_MAP_KWORLD_PLUS_TV_ANALOG; 805 mask_keycode = 0x7f; 806 polling = 40; /* ms */ 807 break; 808 case SAA7134_BOARD_VIDEOMATE_S350: 809 ir_codes = RC_MAP_VIDEOMATE_S350; 810 mask_keycode = 0x003f00; 811 mask_keydown = 0x040000; 812 break; 813 case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S: 814 ir_codes = RC_MAP_WINFAST; 815 mask_keycode = 0x5f00; 816 mask_keyup = 0x020000; 817 polling = 50; /* ms */ 818 break; 819 case SAA7134_BOARD_VIDEOMATE_M1F: 820 ir_codes = RC_MAP_VIDEOMATE_K100; 821 mask_keycode = 0x0ff00; 822 mask_keyup = 0x040000; 823 break; 824 case SAA7134_BOARD_HAUPPAUGE_HVR1150: 825 case SAA7134_BOARD_HAUPPAUGE_HVR1120: 826 ir_codes = RC_MAP_HAUPPAUGE; 827 mask_keydown = 0x0040000; /* Enable GPIO18 line on both edges */ 828 mask_keyup = 0x0040000; 829 mask_keycode = 0xffff; 830 raw_decode = true; 831 break; 832 } 833 if (NULL == ir_codes) { 834 printk("%s: Oops: IR config error [card=%d]\n", 835 dev->name, dev->board); 836 return -ENODEV; 837 } 838 839 ir = kzalloc(sizeof(*ir), GFP_KERNEL); 840 rc = rc_allocate_device(); 841 if (!ir || !rc) { 842 err = -ENOMEM; 843 goto err_out_free; 844 } 845 846 ir->dev = rc; 847 dev->remote = ir; 848 849 /* init hardware-specific stuff */ 850 ir->mask_keycode = mask_keycode; 851 ir->mask_keydown = mask_keydown; 852 ir->mask_keyup = mask_keyup; 853 ir->polling = polling; 854 ir->raw_decode = raw_decode; 855 856 /* init input device */ 857 snprintf(ir->name, sizeof(ir->name), "saa7134 IR (%s)", 858 saa7134_boards[dev->board].name); 859 snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", 860 pci_name(dev->pci)); 861 862 rc->priv = dev; 863 rc->open = saa7134_ir_open; 864 rc->close = saa7134_ir_close; 865 if (raw_decode) 866 rc->driver_type = RC_DRIVER_IR_RAW; 867 868 rc->input_name = ir->name; 869 rc->input_phys = ir->phys; 870 rc->input_id.bustype = BUS_PCI; 871 rc->input_id.version = 1; 872 if (dev->pci->subsystem_vendor) { 873 rc->input_id.vendor = dev->pci->subsystem_vendor; 874 rc->input_id.product = dev->pci->subsystem_device; 875 } else { 876 rc->input_id.vendor = dev->pci->vendor; 877 rc->input_id.product = dev->pci->device; 878 } 879 rc->dev.parent = &dev->pci->dev; 880 rc->map_name = ir_codes; 881 rc->driver_name = MODULE_NAME; 882 883 err = rc_register_device(rc); 884 if (err) 885 goto err_out_free; 886 887 return 0; 888 889err_out_free: 890 rc_free_device(rc); 891 dev->remote = NULL; 892 kfree(ir); 893 return err; 894} 895 896void saa7134_input_fini(struct saa7134_dev *dev) 897{ 898 if (NULL == dev->remote) 899 return; 900 901 saa7134_ir_stop(dev); 902 rc_unregister_device(dev->remote->dev); 903 kfree(dev->remote); 904 dev->remote = NULL; 905} 906 907void saa7134_probe_i2c_ir(struct saa7134_dev *dev) 908{ 909 struct i2c_board_info info; 910 struct i2c_msg msg_msi = { 911 .addr = 0x50, 912 .flags = I2C_M_RD, 913 .len = 0, 914 .buf = NULL, 915 }; 916 int rc; 917 918 if (disable_ir) { 919 dprintk("IR has been disabled, not probing for i2c remote\n"); 920 return; 921 } 922 923 memset(&info, 0, sizeof(struct i2c_board_info)); 924 memset(&dev->init_data, 0, sizeof(dev->init_data)); 925 strlcpy(info.type, "ir_video", I2C_NAME_SIZE); 926 927 switch (dev->board) { 928 case SAA7134_BOARD_PINNACLE_PCTV_110i: 929 case SAA7134_BOARD_PINNACLE_PCTV_310i: 930 dev->init_data.name = "Pinnacle PCTV"; 931 if (pinnacle_remote == 0) { 932 dev->init_data.get_key = get_key_pinnacle_color; 933 dev->init_data.ir_codes = RC_MAP_PINNACLE_COLOR; 934 info.addr = 0x47; 935 } else { 936 dev->init_data.get_key = get_key_pinnacle_grey; 937 dev->init_data.ir_codes = RC_MAP_PINNACLE_GREY; 938 info.addr = 0x47; 939 } 940 break; 941 case SAA7134_BOARD_UPMOST_PURPLE_TV: 942 dev->init_data.name = "Purple TV"; 943 dev->init_data.get_key = get_key_purpletv; 944 dev->init_data.ir_codes = RC_MAP_PURPLETV; 945 info.addr = 0x7a; 946 break; 947 case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS: 948 dev->init_data.name = "MSI TV@nywhere Plus"; 949 dev->init_data.get_key = get_key_msi_tvanywhere_plus; 950 dev->init_data.ir_codes = RC_MAP_MSI_TVANYWHERE_PLUS; 951 /* 952 * MSI TV@nyware Plus requires more frequent polling 953 * otherwise it will miss some keypresses 954 */ 955 dev->init_data.polling_interval = 50; 956 info.addr = 0x30; 957 /* MSI TV@nywhere Plus controller doesn't seem to 958 respond to probes unless we read something from 959 an existing device. Weird... 960 REVISIT: might no longer be needed */ 961 rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1); 962 dprintk("probe 0x%02x @ %s: %s\n", 963 msg_msi.addr, dev->i2c_adap.name, 964 (1 == rc) ? "yes" : "no"); 965 break; 966 case SAA7134_BOARD_KWORLD_PC150U: 967 /* copied and modified from MSI TV@nywhere Plus */ 968 dev->init_data.name = "Kworld PC150-U"; 969 dev->init_data.get_key = get_key_kworld_pc150u; 970 dev->init_data.ir_codes = RC_MAP_KWORLD_PC150U; 971 info.addr = 0x30; 972 /* MSI TV@nywhere Plus controller doesn't seem to 973 respond to probes unless we read something from 974 an existing device. Weird... 975 REVISIT: might no longer be needed */ 976 rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1); 977 dprintk("probe 0x%02x @ %s: %s\n", 978 msg_msi.addr, dev->i2c_adap.name, 979 (1 == rc) ? "yes" : "no"); 980 break; 981 case SAA7134_BOARD_HAUPPAUGE_HVR1110: 982 dev->init_data.name = "HVR 1110"; 983 dev->init_data.get_key = get_key_hvr1110; 984 dev->init_data.ir_codes = RC_MAP_HAUPPAUGE; 985 info.addr = 0x71; 986 break; 987 case SAA7134_BOARD_BEHOLD_607FM_MK3: 988 case SAA7134_BOARD_BEHOLD_607FM_MK5: 989 case SAA7134_BOARD_BEHOLD_609FM_MK3: 990 case SAA7134_BOARD_BEHOLD_609FM_MK5: 991 case SAA7134_BOARD_BEHOLD_607RDS_MK3: 992 case SAA7134_BOARD_BEHOLD_607RDS_MK5: 993 case SAA7134_BOARD_BEHOLD_609RDS_MK3: 994 case SAA7134_BOARD_BEHOLD_609RDS_MK5: 995 case SAA7134_BOARD_BEHOLD_M6: 996 case SAA7134_BOARD_BEHOLD_M63: 997 case SAA7134_BOARD_BEHOLD_M6_EXTRA: 998 case SAA7134_BOARD_BEHOLD_H6: 999 case SAA7134_BOARD_BEHOLD_X7: 1000 case SAA7134_BOARD_BEHOLD_H7: 1001 case SAA7134_BOARD_BEHOLD_A7: 1002 dev->init_data.name = "BeholdTV"; 1003 dev->init_data.get_key = get_key_beholdm6xx; 1004 dev->init_data.ir_codes = RC_MAP_BEHOLD; 1005 dev->init_data.type = RC_BIT_NEC; 1006 info.addr = 0x2d; 1007 break; 1008 case SAA7134_BOARD_AVERMEDIA_CARDBUS_501: 1009 case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: 1010 info.addr = 0x40; 1011 break; 1012 case SAA7134_BOARD_AVERMEDIA_A706: 1013 info.addr = 0x41; 1014 break; 1015 case SAA7134_BOARD_FLYDVB_TRIO: 1016 dev->init_data.name = "FlyDVB Trio"; 1017 dev->init_data.get_key = get_key_flydvb_trio; 1018 dev->init_data.ir_codes = RC_MAP_FLYDVB; 1019 info.addr = 0x0b; 1020 break; 1021 default: 1022 dprintk("No I2C IR support for board %x\n", dev->board); 1023 return; 1024 } 1025 1026 if (dev->init_data.name) 1027 info.platform_data = &dev->init_data; 1028 i2c_new_device(&dev->i2c_adap, &info); 1029} 1030 1031static int saa7134_raw_decode_irq(struct saa7134_dev *dev) 1032{ 1033 struct saa7134_card_ir *ir = dev->remote; 1034 unsigned long timeout; 1035 int space; 1036 1037 /* Generate initial event */ 1038 saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); 1039 saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); 1040 space = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown; 1041 ir_raw_event_store_edge(dev->remote->dev, space ? IR_SPACE : IR_PULSE); 1042 1043 /* 1044 * Wait 15 ms from the start of the first IR event before processing 1045 * the event. This time is enough for NEC protocol. May need adjustments 1046 * to work with other protocols. 1047 */ 1048 smp_mb(); 1049 1050 if (!timer_pending(&ir->timer)) { 1051 timeout = jiffies + msecs_to_jiffies(15); 1052 mod_timer(&ir->timer, timeout); 1053 } 1054 1055 return 1; 1056} 1057