1/* mac8390.c: New driver for 8390-based Nubus (or Nubus-alike)
2   Ethernet cards on Linux */
3/* Based on the former daynaport.c driver, by Alan Cox.  Some code
4   taken from or inspired by skeleton.c by Donald Becker, acenic.c by
5   Jes Sorensen, and ne2k-pci.c by Donald Becker and Paul Gortmaker.
6
7   This software may be used and distributed according to the terms of
8   the GNU Public License, incorporated herein by reference.  */
9
10/* 2000-02-28: support added for Dayna and Kinetics cards by
11   A.G.deWijn@phys.uu.nl */
12/* 2000-04-04: support added for Dayna2 by bart@etpmod.phys.tue.nl */
13/* 2001-04-18: support for DaynaPort E/LC-M by rayk@knightsmanor.org */
14/* 2001-05-15: support for Cabletron ported from old daynaport driver
15 * and fixed access to Sonic Sys card which masquerades as a Farallon
16 * by rayk@knightsmanor.org */
17/* 2002-12-30: Try to support more cards, some clues from NetBSD driver */
18/* 2003-12-26: Make sure Asante cards always work. */
19
20#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
21
22#include <linux/module.h>
23#include <linux/kernel.h>
24#include <linux/types.h>
25#include <linux/fcntl.h>
26#include <linux/interrupt.h>
27#include <linux/ptrace.h>
28#include <linux/ioport.h>
29#include <linux/nubus.h>
30#include <linux/in.h>
31#include <linux/string.h>
32#include <linux/errno.h>
33#include <linux/init.h>
34#include <linux/netdevice.h>
35#include <linux/etherdevice.h>
36#include <linux/skbuff.h>
37#include <linux/bitops.h>
38#include <linux/io.h>
39
40#include <asm/dma.h>
41#include <asm/hwtest.h>
42#include <asm/macints.h>
43
44static char version[] =
45	"v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n";
46
47#define EI_SHIFT(x)	(ei_local->reg_offset[x])
48#define ei_inb(port)	in_8(port)
49#define ei_outb(val, port)	out_8(port, val)
50#define ei_inb_p(port)	in_8(port)
51#define ei_outb_p(val, port)	out_8(port, val)
52
53#include "lib8390.c"
54
55#define WD_START_PG			0x00	/* First page of TX buffer */
56#define CABLETRON_RX_START_PG		0x00    /* First page of RX buffer */
57#define CABLETRON_RX_STOP_PG		0x30    /* Last page +1 of RX ring */
58#define CABLETRON_TX_START_PG		CABLETRON_RX_STOP_PG
59						/* First page of TX buffer */
60
61/*
62 * Unfortunately it seems we have to hardcode these for the moment
63 * Shouldn't the card know about this?
64 * Does anyone know where to read it off the card?
65 * Do we trust the data provided by the card?
66 */
67
68#define DAYNA_8390_BASE		0x80000
69#define DAYNA_8390_MEM		0x00000
70
71#define CABLETRON_8390_BASE	0x90000
72#define CABLETRON_8390_MEM	0x00000
73
74#define INTERLAN_8390_BASE	0xE0000
75#define INTERLAN_8390_MEM	0xD0000
76
77enum mac8390_type {
78	MAC8390_NONE = -1,
79	MAC8390_APPLE,
80	MAC8390_ASANTE,
81	MAC8390_FARALLON,
82	MAC8390_CABLETRON,
83	MAC8390_DAYNA,
84	MAC8390_INTERLAN,
85	MAC8390_KINETICS,
86};
87
88static const char *cardname[] = {
89	"apple",
90	"asante",
91	"farallon",
92	"cabletron",
93	"dayna",
94	"interlan",
95	"kinetics",
96};
97
98static const int word16[] = {
99	1, /* apple */
100	1, /* asante */
101	1, /* farallon */
102	1, /* cabletron */
103	0, /* dayna */
104	1, /* interlan */
105	0, /* kinetics */
106};
107
108/* on which cards do we use NuBus resources? */
109static const int useresources[] = {
110	1, /* apple */
111	1, /* asante */
112	1, /* farallon */
113	0, /* cabletron */
114	0, /* dayna */
115	0, /* interlan */
116	0, /* kinetics */
117};
118
119enum mac8390_access {
120	ACCESS_UNKNOWN = 0,
121	ACCESS_32,
122	ACCESS_16,
123};
124
125extern int mac8390_memtest(struct net_device *dev);
126static int mac8390_initdev(struct net_device *dev, struct nubus_dev *ndev,
127			   enum mac8390_type type);
128
129static int mac8390_open(struct net_device *dev);
130static int mac8390_close(struct net_device *dev);
131static void mac8390_no_reset(struct net_device *dev);
132static void interlan_reset(struct net_device *dev);
133
134/* Sane (32-bit chunk memory read/write) - Some Farallon and Apple do this*/
135static void sane_get_8390_hdr(struct net_device *dev,
136			      struct e8390_pkt_hdr *hdr, int ring_page);
137static void sane_block_input(struct net_device *dev, int count,
138			     struct sk_buff *skb, int ring_offset);
139static void sane_block_output(struct net_device *dev, int count,
140			      const unsigned char *buf, const int start_page);
141
142/* dayna_memcpy to and from card */
143static void dayna_memcpy_fromcard(struct net_device *dev, void *to,
144				int from, int count);
145static void dayna_memcpy_tocard(struct net_device *dev, int to,
146			      const void *from, int count);
147
148/* Dayna - Dayna/Kinetics use this */
149static void dayna_get_8390_hdr(struct net_device *dev,
150			       struct e8390_pkt_hdr *hdr, int ring_page);
151static void dayna_block_input(struct net_device *dev, int count,
152			      struct sk_buff *skb, int ring_offset);
153static void dayna_block_output(struct net_device *dev, int count,
154			       const unsigned char *buf, int start_page);
155
156#define memcpy_fromio(a, b, c)	memcpy((a), (void *)(b), (c))
157#define memcpy_toio(a, b, c)	memcpy((void *)(a), (b), (c))
158
159#define memcmp_withio(a, b, c)	memcmp((a), (void *)(b), (c))
160
161/* Slow Sane (16-bit chunk memory read/write) Cabletron uses this */
162static void slow_sane_get_8390_hdr(struct net_device *dev,
163				   struct e8390_pkt_hdr *hdr, int ring_page);
164static void slow_sane_block_input(struct net_device *dev, int count,
165				  struct sk_buff *skb, int ring_offset);
166static void slow_sane_block_output(struct net_device *dev, int count,
167				   const unsigned char *buf, int start_page);
168static void word_memcpy_tocard(unsigned long tp, const void *fp, int count);
169static void word_memcpy_fromcard(void *tp, unsigned long fp, int count);
170static u32 mac8390_msg_enable;
171
172static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev)
173{
174	switch (dev->dr_sw) {
175	case NUBUS_DRSW_3COM:
176		switch (dev->dr_hw) {
177		case NUBUS_DRHW_APPLE_SONIC_NB:
178		case NUBUS_DRHW_APPLE_SONIC_LC:
179		case NUBUS_DRHW_SONNET:
180			return MAC8390_NONE;
181		default:
182			return MAC8390_APPLE;
183		}
184		break;
185
186	case NUBUS_DRSW_APPLE:
187		switch (dev->dr_hw) {
188		case NUBUS_DRHW_ASANTE_LC:
189			return MAC8390_NONE;
190		case NUBUS_DRHW_CABLETRON:
191			return MAC8390_CABLETRON;
192		default:
193			return MAC8390_APPLE;
194		}
195		break;
196
197	case NUBUS_DRSW_ASANTE:
198		return MAC8390_ASANTE;
199		break;
200
201	case NUBUS_DRSW_TECHWORKS:
202	case NUBUS_DRSW_DAYNA2:
203	case NUBUS_DRSW_DAYNA_LC:
204		if (dev->dr_hw == NUBUS_DRHW_CABLETRON)
205			return MAC8390_CABLETRON;
206		else
207			return MAC8390_APPLE;
208		break;
209
210	case NUBUS_DRSW_FARALLON:
211		return MAC8390_FARALLON;
212		break;
213
214	case NUBUS_DRSW_KINETICS:
215		switch (dev->dr_hw) {
216		case NUBUS_DRHW_INTERLAN:
217			return MAC8390_INTERLAN;
218		default:
219			return MAC8390_KINETICS;
220		}
221		break;
222
223	case NUBUS_DRSW_DAYNA:
224		/*
225		 * These correspond to Dayna Sonic cards
226		 * which use the macsonic driver
227		 */
228		if (dev->dr_hw == NUBUS_DRHW_SMC9194 ||
229		    dev->dr_hw == NUBUS_DRHW_INTERLAN)
230			return MAC8390_NONE;
231		else
232			return MAC8390_DAYNA;
233		break;
234	}
235	return MAC8390_NONE;
236}
237
238static enum mac8390_access __init mac8390_testio(volatile unsigned long membase)
239{
240	unsigned long outdata = 0xA5A0B5B0;
241	unsigned long indata =  0x00000000;
242	/* Try writing 32 bits */
243	memcpy_toio(membase, &outdata, 4);
244	/* Now compare them */
245	if (memcmp_withio(&outdata, membase, 4) == 0)
246		return ACCESS_32;
247	/* Write 16 bit output */
248	word_memcpy_tocard(membase, &outdata, 4);
249	/* Now read it back */
250	word_memcpy_fromcard(&indata, membase, 4);
251	if (outdata == indata)
252		return ACCESS_16;
253	return ACCESS_UNKNOWN;
254}
255
256static int __init mac8390_memsize(unsigned long membase)
257{
258	unsigned long flags;
259	int i, j;
260
261	local_irq_save(flags);
262	/* Check up to 32K in 4K increments */
263	for (i = 0; i < 8; i++) {
264		volatile unsigned short *m = (unsigned short *)(membase + (i * 0x1000));
265
266		/* Unwriteable - we have a fully decoded card and the
267		   RAM end located */
268		if (hwreg_present(m) == 0)
269			break;
270
271		/* write a distinctive byte */
272		*m = 0xA5A0 | i;
273		/* check that we read back what we wrote */
274		if (*m != (0xA5A0 | i))
275			break;
276
277		/* check for partial decode and wrap */
278		for (j = 0; j < i; j++) {
279			volatile unsigned short *p = (unsigned short *)(membase + (j * 0x1000));
280			if (*p != (0xA5A0 | j))
281				break;
282		}
283	}
284	local_irq_restore(flags);
285	/*
286	 * in any case, we stopped once we tried one block too many,
287	 * or once we reached 32K
288	 */
289	return i * 0x1000;
290}
291
292static bool __init mac8390_init(struct net_device *dev, struct nubus_dev *ndev,
293				enum mac8390_type cardtype)
294{
295	struct nubus_dir dir;
296	struct nubus_dirent ent;
297	int offset;
298	volatile unsigned short *i;
299
300	printk_once(KERN_INFO pr_fmt("%s"), version);
301
302	dev->irq = SLOT2IRQ(ndev->board->slot);
303	/* This is getting to be a habit */
304	dev->base_addr = (ndev->board->slot_addr |
305			  ((ndev->board->slot & 0xf) << 20));
306
307	/*
308	 * Get some Nubus info - we will trust the card's idea
309	 * of where its memory and registers are.
310	 */
311
312	if (nubus_get_func_dir(ndev, &dir) == -1) {
313		pr_err("%s: Unable to get Nubus functional directory for slot %X!\n",
314		       dev->name, ndev->board->slot);
315		return false;
316	}
317
318	/* Get the MAC address */
319	if (nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent) == -1) {
320		pr_info("%s: Couldn't get MAC address!\n", dev->name);
321		return false;
322	}
323
324	nubus_get_rsrc_mem(dev->dev_addr, &ent, 6);
325
326	if (useresources[cardtype] == 1) {
327		nubus_rewinddir(&dir);
328		if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS,
329				    &ent) == -1) {
330			pr_err("%s: Memory offset resource for slot %X not found!\n",
331			       dev->name, ndev->board->slot);
332			return false;
333		}
334		nubus_get_rsrc_mem(&offset, &ent, 4);
335		dev->mem_start = dev->base_addr + offset;
336		/* yes, this is how the Apple driver does it */
337		dev->base_addr = dev->mem_start + 0x10000;
338		nubus_rewinddir(&dir);
339		if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH,
340				    &ent) == -1) {
341			pr_info("%s: Memory length resource for slot %X not found, probing\n",
342				dev->name, ndev->board->slot);
343			offset = mac8390_memsize(dev->mem_start);
344		} else {
345			nubus_get_rsrc_mem(&offset, &ent, 4);
346		}
347		dev->mem_end = dev->mem_start + offset;
348	} else {
349		switch (cardtype) {
350		case MAC8390_KINETICS:
351		case MAC8390_DAYNA: /* it's the same */
352			dev->base_addr = (int)(ndev->board->slot_addr +
353					       DAYNA_8390_BASE);
354			dev->mem_start = (int)(ndev->board->slot_addr +
355					       DAYNA_8390_MEM);
356			dev->mem_end = dev->mem_start +
357				       mac8390_memsize(dev->mem_start);
358			break;
359		case MAC8390_INTERLAN:
360			dev->base_addr = (int)(ndev->board->slot_addr +
361					       INTERLAN_8390_BASE);
362			dev->mem_start = (int)(ndev->board->slot_addr +
363					       INTERLAN_8390_MEM);
364			dev->mem_end = dev->mem_start +
365				       mac8390_memsize(dev->mem_start);
366			break;
367		case MAC8390_CABLETRON:
368			dev->base_addr = (int)(ndev->board->slot_addr +
369					       CABLETRON_8390_BASE);
370			dev->mem_start = (int)(ndev->board->slot_addr +
371					       CABLETRON_8390_MEM);
372			/* The base address is unreadable if 0x00
373			 * has been written to the command register
374			 * Reset the chip by writing E8390_NODMA +
375			 *   E8390_PAGE0 + E8390_STOP just to be
376			 *   sure
377			 */
378			i = (void *)dev->base_addr;
379			*i = 0x21;
380			dev->mem_end = dev->mem_start +
381				       mac8390_memsize(dev->mem_start);
382			break;
383
384		default:
385			pr_err("Card type %s is unsupported, sorry\n",
386			       ndev->board->name);
387			return false;
388		}
389	}
390
391	return true;
392}
393
394struct net_device * __init mac8390_probe(int unit)
395{
396	struct net_device *dev;
397	struct nubus_dev *ndev = NULL;
398	int err = -ENODEV;
399	struct ei_device *ei_local;
400
401	static unsigned int slots;
402
403	enum mac8390_type cardtype;
404
405	/* probably should check for Nubus instead */
406
407	if (!MACH_IS_MAC)
408		return ERR_PTR(-ENODEV);
409
410	dev = ____alloc_ei_netdev(0);
411	if (!dev)
412		return ERR_PTR(-ENOMEM);
413
414	if (unit >= 0)
415		sprintf(dev->name, "eth%d", unit);
416
417	while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET,
418				       ndev))) {
419		/* Have we seen it already? */
420		if (slots & (1 << ndev->board->slot))
421			continue;
422		slots |= 1 << ndev->board->slot;
423
424		cardtype = mac8390_ident(ndev);
425		if (cardtype == MAC8390_NONE)
426			continue;
427
428		if (!mac8390_init(dev, ndev, cardtype))
429			continue;
430
431		/* Do the nasty 8390 stuff */
432		if (!mac8390_initdev(dev, ndev, cardtype))
433			break;
434	}
435
436	if (!ndev)
437		goto out;
438
439	 ei_local = netdev_priv(dev);
440	 ei_local->msg_enable = mac8390_msg_enable;
441
442	err = register_netdev(dev);
443	if (err)
444		goto out;
445	return dev;
446
447out:
448	free_netdev(dev);
449	return ERR_PTR(err);
450}
451
452#ifdef MODULE
453MODULE_AUTHOR("David Huggins-Daines <dhd@debian.org> and others");
454MODULE_DESCRIPTION("Macintosh NS8390-based Nubus Ethernet driver");
455MODULE_LICENSE("GPL");
456
457/* overkill, of course */
458static struct net_device *dev_mac8390[15];
459int init_module(void)
460{
461	int i;
462	for (i = 0; i < 15; i++) {
463		struct net_device *dev = mac8390_probe(-1);
464		if (IS_ERR(dev))
465			break;
466		dev_mac890[i] = dev;
467	}
468	if (!i) {
469		pr_notice("No useable cards found, driver NOT installed.\n");
470		return -ENODEV;
471	}
472	return 0;
473}
474
475void cleanup_module(void)
476{
477	int i;
478	for (i = 0; i < 15; i++) {
479		struct net_device *dev = dev_mac890[i];
480		if (dev) {
481			unregister_netdev(dev);
482			free_netdev(dev);
483		}
484	}
485}
486
487#endif /* MODULE */
488
489static const struct net_device_ops mac8390_netdev_ops = {
490	.ndo_open 		= mac8390_open,
491	.ndo_stop		= mac8390_close,
492	.ndo_start_xmit		= __ei_start_xmit,
493	.ndo_tx_timeout		= __ei_tx_timeout,
494	.ndo_get_stats		= __ei_get_stats,
495	.ndo_set_rx_mode	= __ei_set_multicast_list,
496	.ndo_validate_addr	= eth_validate_addr,
497	.ndo_set_mac_address 	= eth_mac_addr,
498	.ndo_change_mtu		= eth_change_mtu,
499#ifdef CONFIG_NET_POLL_CONTROLLER
500	.ndo_poll_controller	= __ei_poll,
501#endif
502};
503
504static int __init mac8390_initdev(struct net_device *dev,
505				  struct nubus_dev *ndev,
506				  enum mac8390_type type)
507{
508	static u32 fwrd4_offsets[16] = {
509		0,      4,      8,      12,
510		16,     20,     24,     28,
511		32,     36,     40,     44,
512		48,     52,     56,     60
513	};
514	static u32 back4_offsets[16] = {
515		60,     56,     52,     48,
516		44,     40,     36,     32,
517		28,     24,     20,     16,
518		12,     8,      4,      0
519	};
520	static u32 fwrd2_offsets[16] = {
521		0,      2,      4,      6,
522		8,     10,     12,     14,
523		16,    18,     20,     22,
524		24,    26,     28,     30
525	};
526
527	int access_bitmode = 0;
528
529	/* Now fill in our stuff */
530	dev->netdev_ops = &mac8390_netdev_ops;
531
532	/* GAR, ei_status is actually a macro even though it looks global */
533	ei_status.name = cardname[type];
534	ei_status.word16 = word16[type];
535
536	/* Cabletron's TX/RX buffers are backwards */
537	if (type == MAC8390_CABLETRON) {
538		ei_status.tx_start_page = CABLETRON_TX_START_PG;
539		ei_status.rx_start_page = CABLETRON_RX_START_PG;
540		ei_status.stop_page = CABLETRON_RX_STOP_PG;
541		ei_status.rmem_start = dev->mem_start;
542		ei_status.rmem_end = dev->mem_start + CABLETRON_RX_STOP_PG*256;
543	} else {
544		ei_status.tx_start_page = WD_START_PG;
545		ei_status.rx_start_page = WD_START_PG + TX_PAGES;
546		ei_status.stop_page = (dev->mem_end - dev->mem_start)/256;
547		ei_status.rmem_start = dev->mem_start + TX_PAGES*256;
548		ei_status.rmem_end = dev->mem_end;
549	}
550
551	/* Fill in model-specific information and functions */
552	switch (type) {
553	case MAC8390_FARALLON:
554	case MAC8390_APPLE:
555		switch (mac8390_testio(dev->mem_start)) {
556		case ACCESS_UNKNOWN:
557			pr_err("Don't know how to access card memory!\n");
558			return -ENODEV;
559
560		case ACCESS_16:
561			/* 16 bit card, register map is reversed */
562			ei_status.reset_8390 = mac8390_no_reset;
563			ei_status.block_input = slow_sane_block_input;
564			ei_status.block_output = slow_sane_block_output;
565			ei_status.get_8390_hdr = slow_sane_get_8390_hdr;
566			ei_status.reg_offset = back4_offsets;
567			break;
568
569		case ACCESS_32:
570			/* 32 bit card, register map is reversed */
571			ei_status.reset_8390 = mac8390_no_reset;
572			ei_status.block_input = sane_block_input;
573			ei_status.block_output = sane_block_output;
574			ei_status.get_8390_hdr = sane_get_8390_hdr;
575			ei_status.reg_offset = back4_offsets;
576			access_bitmode = 1;
577			break;
578		}
579		break;
580
581	case MAC8390_ASANTE:
582		/* Some Asante cards pass the 32 bit test
583		 * but overwrite system memory when run at 32 bit.
584		 * so we run them all at 16 bit.
585		 */
586		ei_status.reset_8390 = mac8390_no_reset;
587		ei_status.block_input = slow_sane_block_input;
588		ei_status.block_output = slow_sane_block_output;
589		ei_status.get_8390_hdr = slow_sane_get_8390_hdr;
590		ei_status.reg_offset = back4_offsets;
591		break;
592
593	case MAC8390_CABLETRON:
594		/* 16 bit card, register map is short forward */
595		ei_status.reset_8390 = mac8390_no_reset;
596		ei_status.block_input = slow_sane_block_input;
597		ei_status.block_output = slow_sane_block_output;
598		ei_status.get_8390_hdr = slow_sane_get_8390_hdr;
599		ei_status.reg_offset = fwrd2_offsets;
600		break;
601
602	case MAC8390_DAYNA:
603	case MAC8390_KINETICS:
604		/* 16 bit memory, register map is forward */
605		/* dayna and similar */
606		ei_status.reset_8390 = mac8390_no_reset;
607		ei_status.block_input = dayna_block_input;
608		ei_status.block_output = dayna_block_output;
609		ei_status.get_8390_hdr = dayna_get_8390_hdr;
610		ei_status.reg_offset = fwrd4_offsets;
611		break;
612
613	case MAC8390_INTERLAN:
614		/* 16 bit memory, register map is forward */
615		ei_status.reset_8390 = interlan_reset;
616		ei_status.block_input = slow_sane_block_input;
617		ei_status.block_output = slow_sane_block_output;
618		ei_status.get_8390_hdr = slow_sane_get_8390_hdr;
619		ei_status.reg_offset = fwrd4_offsets;
620		break;
621
622	default:
623		pr_err("Card type %s is unsupported, sorry\n",
624		       ndev->board->name);
625		return -ENODEV;
626	}
627
628	__NS8390_init(dev, 0);
629
630	/* Good, done, now spit out some messages */
631	pr_info("%s: %s in slot %X (type %s)\n",
632		dev->name, ndev->board->name, ndev->board->slot,
633		cardname[type]);
634	pr_info("MAC %pM IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n",
635		dev->dev_addr, dev->irq,
636		(unsigned int)(dev->mem_end - dev->mem_start) >> 10,
637		dev->mem_start, access_bitmode ? 32 : 16);
638	return 0;
639}
640
641static int mac8390_open(struct net_device *dev)
642{
643	int err;
644
645	__ei_open(dev);
646	err = request_irq(dev->irq, __ei_interrupt, 0, "8390 Ethernet", dev);
647	if (err)
648		pr_err("%s: unable to get IRQ %d\n", dev->name, dev->irq);
649	return err;
650}
651
652static int mac8390_close(struct net_device *dev)
653{
654	free_irq(dev->irq, dev);
655	__ei_close(dev);
656	return 0;
657}
658
659static void mac8390_no_reset(struct net_device *dev)
660{
661	struct ei_device *ei_local = netdev_priv(dev);
662
663	ei_status.txing = 0;
664	netif_info(ei_local, hw, dev, "reset not supported\n");
665}
666
667static void interlan_reset(struct net_device *dev)
668{
669	unsigned char *target = nubus_slot_addr(IRQ2SLOT(dev->irq));
670	struct ei_device *ei_local = netdev_priv(dev);
671
672	netif_info(ei_local, hw, dev, "Need to reset the NS8390 t=%lu...",
673		   jiffies);
674	ei_status.txing = 0;
675	target[0xC0000] = 0;
676	if (netif_msg_hw(ei_local))
677		pr_cont("reset complete\n");
678}
679
680/* dayna_memcpy_fromio/dayna_memcpy_toio */
681/* directly from daynaport.c by Alan Cox */
682static void dayna_memcpy_fromcard(struct net_device *dev, void *to, int from,
683				  int count)
684{
685	volatile unsigned char *ptr;
686	unsigned char *target = to;
687	from <<= 1;	/* word, skip overhead */
688	ptr = (unsigned char *)(dev->mem_start+from);
689	/* Leading byte? */
690	if (from & 2) {
691		*target++ = ptr[-1];
692		ptr += 2;
693		count--;
694	}
695	while (count >= 2) {
696		*(unsigned short *)target = *(unsigned short volatile *)ptr;
697		ptr += 4;			/* skip cruft */
698		target += 2;
699		count -= 2;
700	}
701	/* Trailing byte? */
702	if (count)
703		*target = *ptr;
704}
705
706static void dayna_memcpy_tocard(struct net_device *dev, int to,
707				const void *from, int count)
708{
709	volatile unsigned short *ptr;
710	const unsigned char *src = from;
711	to <<= 1;	/* word, skip overhead */
712	ptr = (unsigned short *)(dev->mem_start+to);
713	/* Leading byte? */
714	if (to & 2) {		/* avoid a byte write (stomps on other data) */
715		ptr[-1] = (ptr[-1]&0xFF00)|*src++;
716		ptr++;
717		count--;
718	}
719	while (count >= 2) {
720		*ptr++ = *(unsigned short *)src;	/* Copy and */
721		ptr++;			/* skip cruft */
722		src += 2;
723		count -= 2;
724	}
725	/* Trailing byte? */
726	if (count) {
727		/* card doesn't like byte writes */
728		*ptr = (*ptr & 0x00FF) | (*src << 8);
729	}
730}
731
732/* sane block input/output */
733static void sane_get_8390_hdr(struct net_device *dev,
734			      struct e8390_pkt_hdr *hdr, int ring_page)
735{
736	unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
737	memcpy_fromio(hdr, dev->mem_start + hdr_start, 4);
738	/* Fix endianness */
739	hdr->count = swab16(hdr->count);
740}
741
742static void sane_block_input(struct net_device *dev, int count,
743			     struct sk_buff *skb, int ring_offset)
744{
745	unsigned long xfer_base = ring_offset - (WD_START_PG<<8);
746	unsigned long xfer_start = xfer_base + dev->mem_start;
747
748	if (xfer_start + count > ei_status.rmem_end) {
749		/* We must wrap the input move. */
750		int semi_count = ei_status.rmem_end - xfer_start;
751		memcpy_fromio(skb->data, dev->mem_start + xfer_base,
752			      semi_count);
753		count -= semi_count;
754		memcpy_fromio(skb->data + semi_count, ei_status.rmem_start,
755			      count);
756	} else {
757		memcpy_fromio(skb->data, dev->mem_start + xfer_base, count);
758	}
759}
760
761static void sane_block_output(struct net_device *dev, int count,
762			      const unsigned char *buf, int start_page)
763{
764	long shmem = (start_page - WD_START_PG)<<8;
765
766	memcpy_toio(dev->mem_start + shmem, buf, count);
767}
768
769/* dayna block input/output */
770static void dayna_get_8390_hdr(struct net_device *dev,
771			       struct e8390_pkt_hdr *hdr, int ring_page)
772{
773	unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
774
775	dayna_memcpy_fromcard(dev, hdr, hdr_start, 4);
776	/* Fix endianness */
777	hdr->count = (hdr->count & 0xFF) << 8 | (hdr->count >> 8);
778}
779
780static void dayna_block_input(struct net_device *dev, int count,
781			      struct sk_buff *skb, int ring_offset)
782{
783	unsigned long xfer_base = ring_offset - (WD_START_PG<<8);
784	unsigned long xfer_start = xfer_base+dev->mem_start;
785
786	/* Note the offset math is done in card memory space which is word
787	   per long onto our space. */
788
789	if (xfer_start + count > ei_status.rmem_end) {
790		/* We must wrap the input move. */
791		int semi_count = ei_status.rmem_end - xfer_start;
792		dayna_memcpy_fromcard(dev, skb->data, xfer_base, semi_count);
793		count -= semi_count;
794		dayna_memcpy_fromcard(dev, skb->data + semi_count,
795				      ei_status.rmem_start - dev->mem_start,
796				      count);
797	} else {
798		dayna_memcpy_fromcard(dev, skb->data, xfer_base, count);
799	}
800}
801
802static void dayna_block_output(struct net_device *dev, int count,
803			       const unsigned char *buf,
804			       int start_page)
805{
806	long shmem = (start_page - WD_START_PG)<<8;
807
808	dayna_memcpy_tocard(dev, shmem, buf, count);
809}
810
811/* Cabletron block I/O */
812static void slow_sane_get_8390_hdr(struct net_device *dev,
813				   struct e8390_pkt_hdr *hdr,
814				   int ring_page)
815{
816	unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
817	word_memcpy_fromcard(hdr, dev->mem_start + hdr_start, 4);
818	/* Register endianism - fix here rather than 8390.c */
819	hdr->count = (hdr->count&0xFF)<<8|(hdr->count>>8);
820}
821
822static void slow_sane_block_input(struct net_device *dev, int count,
823				  struct sk_buff *skb, int ring_offset)
824{
825	unsigned long xfer_base = ring_offset - (WD_START_PG<<8);
826	unsigned long xfer_start = xfer_base+dev->mem_start;
827
828	if (xfer_start + count > ei_status.rmem_end) {
829		/* We must wrap the input move. */
830		int semi_count = ei_status.rmem_end - xfer_start;
831		word_memcpy_fromcard(skb->data, dev->mem_start + xfer_base,
832				     semi_count);
833		count -= semi_count;
834		word_memcpy_fromcard(skb->data + semi_count,
835				     ei_status.rmem_start, count);
836	} else {
837		word_memcpy_fromcard(skb->data, dev->mem_start + xfer_base,
838				     count);
839	}
840}
841
842static void slow_sane_block_output(struct net_device *dev, int count,
843				   const unsigned char *buf, int start_page)
844{
845	long shmem = (start_page - WD_START_PG)<<8;
846
847	word_memcpy_tocard(dev->mem_start + shmem, buf, count);
848}
849
850static void word_memcpy_tocard(unsigned long tp, const void *fp, int count)
851{
852	volatile unsigned short *to = (void *)tp;
853	const unsigned short *from = fp;
854
855	count++;
856	count /= 2;
857
858	while (count--)
859		*to++ = *from++;
860}
861
862static void word_memcpy_fromcard(void *tp, unsigned long fp, int count)
863{
864	unsigned short *to = tp;
865	const volatile unsigned short *from = (const void *)fp;
866
867	count++;
868	count /= 2;
869
870	while (count--)
871		*to++ = *from++;
872}
873
874
875