1/*
2 * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet
3 * driver for Linux.
4 *
5 * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
6 *
7 * This software is available to you under a choice of one of two
8 * licenses.  You may choose to be licensed under the terms of the GNU
9 * General Public License (GPL) Version 2, available from the file
10 * COPYING in the main directory of this source tree, or the
11 * OpenIB.org BSD license below:
12 *
13 *     Redistribution and use in source and binary forms, with or
14 *     without modification, are permitted provided that the following
15 *     conditions are met:
16 *
17 *      - Redistributions of source code must retain the above
18 *        copyright notice, this list of conditions and the following
19 *        disclaimer.
20 *
21 *      - Redistributions in binary form must reproduce the above
22 *        copyright notice, this list of conditions and the following
23 *        disclaimer in the documentation and/or other materials
24 *        provided with the distribution.
25 *
26 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
27 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
28 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
29 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
30 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
31 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
32 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
33 * SOFTWARE.
34 */
35
36/*
37 * This file should not be included directly.  Include t4vf_common.h instead.
38 */
39
40#ifndef __CXGB4VF_ADAPTER_H__
41#define __CXGB4VF_ADAPTER_H__
42
43#include <linux/interrupt.h>
44#include <linux/pci.h>
45#include <linux/spinlock.h>
46#include <linux/skbuff.h>
47#include <linux/if_ether.h>
48#include <linux/netdevice.h>
49
50#include "../cxgb4/t4_hw.h"
51
52/*
53 * Constants of the implementation.
54 */
55enum {
56	MAX_NPORTS	= 1,		/* max # of "ports" */
57	MAX_PORT_QSETS	= 8,		/* max # of Queue Sets / "port" */
58	MAX_ETH_QSETS	= MAX_NPORTS*MAX_PORT_QSETS,
59
60	/*
61	 * MSI-X interrupt index usage.
62	 */
63	MSIX_FW		= 0,		/* MSI-X index for firmware Q */
64	MSIX_IQFLINT	= 1,		/* MSI-X index base for Ingress Qs */
65	MSIX_EXTRAS	= 1,
66	MSIX_ENTRIES	= MAX_ETH_QSETS + MSIX_EXTRAS,
67
68	/*
69	 * The maximum number of Ingress and Egress Queues is determined by
70	 * the maximum number of "Queue Sets" which we support plus any
71	 * ancillary queues.  Each "Queue Set" requires one Ingress Queue
72	 * for RX Packet Ingress Event notifications and two Egress Queues for
73	 * a Free List and an Ethernet TX list.
74	 */
75	INGQ_EXTRAS	= 2,		/* firmware event queue and */
76					/*   forwarded interrupts */
77	MAX_INGQ	= MAX_ETH_QSETS+INGQ_EXTRAS,
78	MAX_EGRQ	= MAX_ETH_QSETS*2,
79};
80
81/*
82 * Forward structure definition references.
83 */
84struct adapter;
85struct sge_eth_rxq;
86struct sge_rspq;
87
88/*
89 * Per-"port" information.  This is really per-Virtual Interface information
90 * but the use of the "port" nomanclature makes it easier to go back and forth
91 * between the PF and VF drivers ...
92 */
93struct port_info {
94	struct adapter *adapter;	/* our adapter */
95	u16 viid;			/* virtual interface ID */
96	s16 xact_addr_filt;		/* index of our MAC address filter */
97	u16 rss_size;			/* size of VI's RSS table slice */
98	u8 pidx;			/* index into adapter port[] */
99	s8 mdio_addr;
100	u8 port_type;			/* firmware port type */
101	u8 mod_type;			/* firmware module type */
102	u8 port_id;			/* physical port ID */
103	u8 nqsets;			/* # of "Queue Sets" */
104	u8 first_qset;			/* index of first "Queue Set" */
105	struct link_config link_cfg;	/* physical port configuration */
106};
107
108/*
109 * Scatter Gather Engine resources for the "adapter".  Our ingress and egress
110 * queues are organized into "Queue Sets" with one ingress and one egress
111 * queue per Queue Set.  These Queue Sets are aportionable between the "ports"
112 * (Virtual Interfaces).  One extra ingress queue is used to receive
113 * asynchronous messages from the firmware.  Note that the "Queue IDs" that we
114 * use here are really "Relative Queue IDs" which are returned as part of the
115 * firmware command to allocate queues.  These queue IDs are relative to the
116 * absolute Queue ID base of the section of the Queue ID space allocated to
117 * the PF/VF.
118 */
119
120/*
121 * SGE free-list queue state.
122 */
123struct rx_sw_desc;
124struct sge_fl {
125	unsigned int avail;		/* # of available RX buffers */
126	unsigned int pend_cred;		/* new buffers since last FL DB ring */
127	unsigned int cidx;		/* consumer index */
128	unsigned int pidx;		/* producer index */
129	unsigned long alloc_failed;	/* # of buffer allocation failures */
130	unsigned long large_alloc_failed;
131	unsigned long starving;		/* # of times FL was found starving */
132
133	/*
134	 * Write-once/infrequently fields.
135	 * -------------------------------
136	 */
137
138	unsigned int cntxt_id;		/* SGE relative QID for the free list */
139	unsigned int abs_id;		/* SGE absolute QID for the free list */
140	unsigned int size;		/* capacity of free list */
141	struct rx_sw_desc *sdesc;	/* address of SW RX descriptor ring */
142	__be64 *desc;			/* address of HW RX descriptor ring */
143	dma_addr_t addr;		/* PCI bus address of hardware ring */
144	void __iomem *bar2_addr;	/* address of BAR2 Queue registers */
145	unsigned int bar2_qid;		/* Queue ID for BAR2 Queue registers */
146};
147
148/*
149 * An ingress packet gather list.
150 */
151struct pkt_gl {
152	struct page_frag frags[MAX_SKB_FRAGS];
153	void *va;			/* virtual address of first byte */
154	unsigned int nfrags;		/* # of fragments */
155	unsigned int tot_len;		/* total length of fragments */
156};
157
158typedef int (*rspq_handler_t)(struct sge_rspq *, const __be64 *,
159			      const struct pkt_gl *);
160
161/*
162 * State for an SGE Response Queue.
163 */
164struct sge_rspq {
165	struct napi_struct napi;	/* NAPI scheduling control */
166	const __be64 *cur_desc;		/* current descriptor in queue */
167	unsigned int cidx;		/* consumer index */
168	u8 gen;				/* current generation bit */
169	u8 next_intr_params;		/* holdoff params for next interrupt */
170	int offset;			/* offset into current FL buffer */
171
172	unsigned int unhandled_irqs;	/* bogus interrupts */
173
174	/*
175	 * Write-once/infrequently fields.
176	 * -------------------------------
177	 */
178
179	u8 intr_params;			/* interrupt holdoff parameters */
180	u8 pktcnt_idx;			/* interrupt packet threshold */
181	u8 idx;				/* queue index within its group */
182	u16 cntxt_id;			/* SGE rel QID for the response Q */
183	u16 abs_id;			/* SGE abs QID for the response Q */
184	__be64 *desc;			/* address of hardware response ring */
185	dma_addr_t phys_addr;		/* PCI bus address of ring */
186	void __iomem *bar2_addr;	/* address of BAR2 Queue registers */
187	unsigned int bar2_qid;		/* Queue ID for BAR2 Queue registers */
188	unsigned int iqe_len;		/* entry size */
189	unsigned int size;		/* capcity of response Q */
190	struct adapter *adapter;	/* our adapter */
191	struct net_device *netdev;	/* associated net device */
192	rspq_handler_t handler;		/* the handler for this response Q */
193};
194
195/*
196 * Ethernet queue statistics
197 */
198struct sge_eth_stats {
199	unsigned long pkts;		/* # of ethernet packets */
200	unsigned long lro_pkts;		/* # of LRO super packets */
201	unsigned long lro_merged;	/* # of wire packets merged by LRO */
202	unsigned long rx_cso;		/* # of Rx checksum offloads */
203	unsigned long vlan_ex;		/* # of Rx VLAN extractions */
204	unsigned long rx_drops;		/* # of packets dropped due to no mem */
205};
206
207/*
208 * State for an Ethernet Receive Queue.
209 */
210struct sge_eth_rxq {
211	struct sge_rspq rspq;		/* Response Queue */
212	struct sge_fl fl;		/* Free List */
213	struct sge_eth_stats stats;	/* receive statistics */
214};
215
216/*
217 * SGE Transmit Queue state.  This contains all of the resources associated
218 * with the hardware status of a TX Queue which is a circular ring of hardware
219 * TX Descriptors.  For convenience, it also contains a pointer to a parallel
220 * "Software Descriptor" array but we don't know anything about it here other
221 * than its type name.
222 */
223struct tx_desc {
224	/*
225	 * Egress Queues are measured in units of SGE_EQ_IDXSIZE by the
226	 * hardware: Sizes, Producer and Consumer indices, etc.
227	 */
228	__be64 flit[SGE_EQ_IDXSIZE/sizeof(__be64)];
229};
230struct tx_sw_desc;
231struct sge_txq {
232	unsigned int in_use;		/* # of in-use TX descriptors */
233	unsigned int size;		/* # of descriptors */
234	unsigned int cidx;		/* SW consumer index */
235	unsigned int pidx;		/* producer index */
236	unsigned long stops;		/* # of times queue has been stopped */
237	unsigned long restarts;		/* # of queue restarts */
238
239	/*
240	 * Write-once/infrequently fields.
241	 * -------------------------------
242	 */
243
244	unsigned int cntxt_id;		/* SGE relative QID for the TX Q */
245	unsigned int abs_id;		/* SGE absolute QID for the TX Q */
246	struct tx_desc *desc;		/* address of HW TX descriptor ring */
247	struct tx_sw_desc *sdesc;	/* address of SW TX descriptor ring */
248	struct sge_qstat *stat;		/* queue status entry */
249	dma_addr_t phys_addr;		/* PCI bus address of hardware ring */
250	void __iomem *bar2_addr;	/* address of BAR2 Queue registers */
251	unsigned int bar2_qid;		/* Queue ID for BAR2 Queue registers */
252};
253
254/*
255 * State for an Ethernet Transmit Queue.
256 */
257struct sge_eth_txq {
258	struct sge_txq q;		/* SGE TX Queue */
259	struct netdev_queue *txq;	/* associated netdev TX queue */
260	unsigned long tso;		/* # of TSO requests */
261	unsigned long tx_cso;		/* # of TX checksum offloads */
262	unsigned long vlan_ins;		/* # of TX VLAN insertions */
263	unsigned long mapping_err;	/* # of I/O MMU packet mapping errors */
264};
265
266/*
267 * The complete set of Scatter/Gather Engine resources.
268 */
269struct sge {
270	/*
271	 * Our "Queue Sets" ...
272	 */
273	struct sge_eth_txq ethtxq[MAX_ETH_QSETS];
274	struct sge_eth_rxq ethrxq[MAX_ETH_QSETS];
275
276	/*
277	 * Extra ingress queues for asynchronous firmware events and
278	 * forwarded interrupts (when in MSI mode).
279	 */
280	struct sge_rspq fw_evtq ____cacheline_aligned_in_smp;
281
282	struct sge_rspq intrq ____cacheline_aligned_in_smp;
283	spinlock_t intrq_lock;
284
285	/*
286	 * State for managing "starving Free Lists" -- Free Lists which have
287	 * fallen below a certain threshold of buffers available to the
288	 * hardware and attempts to refill them up to that threshold have
289	 * failed.  We have a regular "slow tick" timer process which will
290	 * make periodic attempts to refill these starving Free Lists ...
291	 */
292	DECLARE_BITMAP(starving_fl, MAX_EGRQ);
293	struct timer_list rx_timer;
294
295	/*
296	 * State for cleaning up completed TX descriptors.
297	 */
298	struct timer_list tx_timer;
299
300	/*
301	 * Write-once/infrequently fields.
302	 * -------------------------------
303	 */
304
305	u16 max_ethqsets;		/* # of available Ethernet queue sets */
306	u16 ethqsets;			/* # of active Ethernet queue sets */
307	u16 ethtxq_rover;		/* Tx queue to clean up next */
308	u16 timer_val[SGE_NTIMERS];	/* interrupt holdoff timer array */
309	u8 counter_val[SGE_NCOUNTERS];	/* interrupt RX threshold array */
310
311	/* Decoded Adapter Parameters.
312	 */
313	u32 fl_pg_order;		/* large page allocation size */
314	u32 stat_len;			/* length of status page at ring end */
315	u32 pktshift;			/* padding between CPL & packet data */
316	u32 fl_align;			/* response queue message alignment */
317	u32 fl_starve_thres;		/* Free List starvation threshold */
318
319	/*
320	 * Reverse maps from Absolute Queue IDs to associated queue pointers.
321	 * The absolute Queue IDs are in a compact range which start at a
322	 * [potentially large] Base Queue ID.  We perform the reverse map by
323	 * first converting the Absolute Queue ID into a Relative Queue ID by
324	 * subtracting off the Base Queue ID and then use a Relative Queue ID
325	 * indexed table to get the pointer to the corresponding software
326	 * queue structure.
327	 */
328	unsigned int egr_base;
329	unsigned int ingr_base;
330	void *egr_map[MAX_EGRQ];
331	struct sge_rspq *ingr_map[MAX_INGQ];
332};
333
334/*
335 * Utility macros to convert Absolute- to Relative-Queue indices and Egress-
336 * and Ingress-Queues.  The EQ_MAP() and IQ_MAP() macros which provide
337 * pointers to Ingress- and Egress-Queues can be used as both L- and R-values
338 */
339#define EQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->egr_base))
340#define IQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->ingr_base))
341
342#define EQ_MAP(s, abs_id) ((s)->egr_map[EQ_IDX(s, abs_id)])
343#define IQ_MAP(s, abs_id) ((s)->ingr_map[IQ_IDX(s, abs_id)])
344
345/*
346 * Macro to iterate across Queue Sets ("rxq" is a historic misnomer).
347 */
348#define for_each_ethrxq(sge, iter) \
349	for (iter = 0; iter < (sge)->ethqsets; iter++)
350
351/*
352 * Per-"adapter" (Virtual Function) information.
353 */
354struct adapter {
355	/* PCI resources */
356	void __iomem *regs;
357	void __iomem *bar2;
358	struct pci_dev *pdev;
359	struct device *pdev_dev;
360
361	/* "adapter" resources */
362	unsigned long registered_device_map;
363	unsigned long open_device_map;
364	unsigned long flags;
365	struct adapter_params params;
366
367	/* queue and interrupt resources */
368	struct {
369		unsigned short vec;
370		char desc[22];
371	} msix_info[MSIX_ENTRIES];
372	struct sge sge;
373
374	/* Linux network device resources */
375	struct net_device *port[MAX_NPORTS];
376	const char *name;
377	unsigned int msg_enable;
378
379	/* debugfs resources */
380	struct dentry *debugfs_root;
381
382	/* various locks */
383	spinlock_t stats_lock;
384};
385
386enum { /* adapter flags */
387	FULL_INIT_DONE     = (1UL << 0),
388	USING_MSI          = (1UL << 1),
389	USING_MSIX         = (1UL << 2),
390	QUEUES_BOUND       = (1UL << 3),
391};
392
393/*
394 * The following register read/write routine definitions are required by
395 * the common code.
396 */
397
398/**
399 * t4_read_reg - read a HW register
400 * @adapter: the adapter
401 * @reg_addr: the register address
402 *
403 * Returns the 32-bit value of the given HW register.
404 */
405static inline u32 t4_read_reg(struct adapter *adapter, u32 reg_addr)
406{
407	return readl(adapter->regs + reg_addr);
408}
409
410/**
411 * t4_write_reg - write a HW register
412 * @adapter: the adapter
413 * @reg_addr: the register address
414 * @val: the value to write
415 *
416 * Write a 32-bit value into the given HW register.
417 */
418static inline void t4_write_reg(struct adapter *adapter, u32 reg_addr, u32 val)
419{
420	writel(val, adapter->regs + reg_addr);
421}
422
423#ifndef readq
424static inline u64 readq(const volatile void __iomem *addr)
425{
426	return readl(addr) + ((u64)readl(addr + 4) << 32);
427}
428
429static inline void writeq(u64 val, volatile void __iomem *addr)
430{
431	writel(val, addr);
432	writel(val >> 32, addr + 4);
433}
434#endif
435
436/**
437 * t4_read_reg64 - read a 64-bit HW register
438 * @adapter: the adapter
439 * @reg_addr: the register address
440 *
441 * Returns the 64-bit value of the given HW register.
442 */
443static inline u64 t4_read_reg64(struct adapter *adapter, u32 reg_addr)
444{
445	return readq(adapter->regs + reg_addr);
446}
447
448/**
449 * t4_write_reg64 - write a 64-bit HW register
450 * @adapter: the adapter
451 * @reg_addr: the register address
452 * @val: the value to write
453 *
454 * Write a 64-bit value into the given HW register.
455 */
456static inline void t4_write_reg64(struct adapter *adapter, u32 reg_addr,
457				  u64 val)
458{
459	writeq(val, adapter->regs + reg_addr);
460}
461
462/**
463 * port_name - return the string name of a port
464 * @adapter: the adapter
465 * @pidx: the port index
466 *
467 * Return the string name of the selected port.
468 */
469static inline const char *port_name(struct adapter *adapter, int pidx)
470{
471	return adapter->port[pidx]->name;
472}
473
474/**
475 * t4_os_set_hw_addr - store a port's MAC address in SW
476 * @adapter: the adapter
477 * @pidx: the port index
478 * @hw_addr: the Ethernet address
479 *
480 * Store the Ethernet address of the given port in SW.  Called by the common
481 * code when it retrieves a port's Ethernet address from EEPROM.
482 */
483static inline void t4_os_set_hw_addr(struct adapter *adapter, int pidx,
484				     u8 hw_addr[])
485{
486	memcpy(adapter->port[pidx]->dev_addr, hw_addr, ETH_ALEN);
487}
488
489/**
490 * netdev2pinfo - return the port_info structure associated with a net_device
491 * @dev: the netdev
492 *
493 * Return the struct port_info associated with a net_device
494 */
495static inline struct port_info *netdev2pinfo(const struct net_device *dev)
496{
497	return netdev_priv(dev);
498}
499
500/**
501 * adap2pinfo - return the port_info of a port
502 * @adap: the adapter
503 * @pidx: the port index
504 *
505 * Return the port_info structure for the adapter.
506 */
507static inline struct port_info *adap2pinfo(struct adapter *adapter, int pidx)
508{
509	return netdev_priv(adapter->port[pidx]);
510}
511
512/**
513 * netdev2adap - return the adapter structure associated with a net_device
514 * @dev: the netdev
515 *
516 * Return the struct adapter associated with a net_device
517 */
518static inline struct adapter *netdev2adap(const struct net_device *dev)
519{
520	return netdev2pinfo(dev)->adapter;
521}
522
523/*
524 * OS "Callback" function declarations.  These are functions that the OS code
525 * is "contracted" to provide for the common code.
526 */
527void t4vf_os_link_changed(struct adapter *, int, int);
528void t4vf_os_portmod_changed(struct adapter *, int);
529
530/*
531 * SGE function prototype declarations.
532 */
533int t4vf_sge_alloc_rxq(struct adapter *, struct sge_rspq *, bool,
534		       struct net_device *, int,
535		       struct sge_fl *, rspq_handler_t);
536int t4vf_sge_alloc_eth_txq(struct adapter *, struct sge_eth_txq *,
537			   struct net_device *, struct netdev_queue *,
538			   unsigned int);
539void t4vf_free_sge_resources(struct adapter *);
540
541int t4vf_eth_xmit(struct sk_buff *, struct net_device *);
542int t4vf_ethrx_handler(struct sge_rspq *, const __be64 *,
543		       const struct pkt_gl *);
544
545irq_handler_t t4vf_intr_handler(struct adapter *);
546irqreturn_t t4vf_sge_intr_msix(int, void *);
547
548int t4vf_sge_init(struct adapter *);
549void t4vf_sge_start(struct adapter *);
550void t4vf_sge_stop(struct adapter *);
551
552#endif /* __CXGB4VF_ADAPTER_H__ */
553