1/******************************************************************************
2 *
3 * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17 *
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
20 *
21 * Contact Information:
22 *  Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24 *
25 *****************************************************************************/
26
27#ifndef __iwl_agn_rs_h__
28#define __iwl_agn_rs_h__
29
30#include <net/mac80211.h>
31
32#include "iwl-config.h"
33
34#include "commands.h"
35
36struct iwl_rate_info {
37	u8 plcp;	/* uCode API:  IWL_RATE_6M_PLCP, etc. */
38	u8 plcp_siso;	/* uCode API:  IWL_RATE_SISO_6M_PLCP, etc. */
39	u8 plcp_mimo2;	/* uCode API:  IWL_RATE_MIMO2_6M_PLCP, etc. */
40	u8 plcp_mimo3;  /* uCode API:  IWL_RATE_MIMO3_6M_PLCP, etc. */
41	u8 ieee;	/* MAC header:  IWL_RATE_6M_IEEE, etc. */
42	u8 prev_ieee;    /* previous rate in IEEE speeds */
43	u8 next_ieee;    /* next rate in IEEE speeds */
44	u8 prev_rs;      /* previous rate used in rs algo */
45	u8 next_rs;      /* next rate used in rs algo */
46	u8 prev_rs_tgg;  /* previous rate used in TGG rs algo */
47	u8 next_rs_tgg;  /* next rate used in TGG rs algo */
48};
49
50/*
51 * These serve as indexes into
52 * struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
53 */
54enum {
55	IWL_RATE_1M_INDEX = 0,
56	IWL_RATE_2M_INDEX,
57	IWL_RATE_5M_INDEX,
58	IWL_RATE_11M_INDEX,
59	IWL_RATE_6M_INDEX,
60	IWL_RATE_9M_INDEX,
61	IWL_RATE_12M_INDEX,
62	IWL_RATE_18M_INDEX,
63	IWL_RATE_24M_INDEX,
64	IWL_RATE_36M_INDEX,
65	IWL_RATE_48M_INDEX,
66	IWL_RATE_54M_INDEX,
67	IWL_RATE_60M_INDEX,
68	IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/
69	IWL_RATE_COUNT_LEGACY = IWL_RATE_COUNT - 1,	/* Excluding 60M */
70	IWL_RATE_INVM_INDEX = IWL_RATE_COUNT,
71	IWL_RATE_INVALID = IWL_RATE_COUNT,
72};
73
74enum {
75	IWL_RATE_6M_INDEX_TABLE = 0,
76	IWL_RATE_9M_INDEX_TABLE,
77	IWL_RATE_12M_INDEX_TABLE,
78	IWL_RATE_18M_INDEX_TABLE,
79	IWL_RATE_24M_INDEX_TABLE,
80	IWL_RATE_36M_INDEX_TABLE,
81	IWL_RATE_48M_INDEX_TABLE,
82	IWL_RATE_54M_INDEX_TABLE,
83	IWL_RATE_1M_INDEX_TABLE,
84	IWL_RATE_2M_INDEX_TABLE,
85	IWL_RATE_5M_INDEX_TABLE,
86	IWL_RATE_11M_INDEX_TABLE,
87	IWL_RATE_INVM_INDEX_TABLE = IWL_RATE_INVM_INDEX - 1,
88};
89
90enum {
91	IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX,
92	IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX,
93	IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX,
94	IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX,
95};
96
97/* #define vs. enum to keep from defaulting to 'large integer' */
98#define	IWL_RATE_6M_MASK   (1 << IWL_RATE_6M_INDEX)
99#define	IWL_RATE_9M_MASK   (1 << IWL_RATE_9M_INDEX)
100#define	IWL_RATE_12M_MASK  (1 << IWL_RATE_12M_INDEX)
101#define	IWL_RATE_18M_MASK  (1 << IWL_RATE_18M_INDEX)
102#define	IWL_RATE_24M_MASK  (1 << IWL_RATE_24M_INDEX)
103#define	IWL_RATE_36M_MASK  (1 << IWL_RATE_36M_INDEX)
104#define	IWL_RATE_48M_MASK  (1 << IWL_RATE_48M_INDEX)
105#define	IWL_RATE_54M_MASK  (1 << IWL_RATE_54M_INDEX)
106#define IWL_RATE_60M_MASK  (1 << IWL_RATE_60M_INDEX)
107#define	IWL_RATE_1M_MASK   (1 << IWL_RATE_1M_INDEX)
108#define	IWL_RATE_2M_MASK   (1 << IWL_RATE_2M_INDEX)
109#define	IWL_RATE_5M_MASK   (1 << IWL_RATE_5M_INDEX)
110#define	IWL_RATE_11M_MASK  (1 << IWL_RATE_11M_INDEX)
111
112/* uCode API values for legacy bit rates, both OFDM and CCK */
113enum {
114	IWL_RATE_6M_PLCP  = 13,
115	IWL_RATE_9M_PLCP  = 15,
116	IWL_RATE_12M_PLCP = 5,
117	IWL_RATE_18M_PLCP = 7,
118	IWL_RATE_24M_PLCP = 9,
119	IWL_RATE_36M_PLCP = 11,
120	IWL_RATE_48M_PLCP = 1,
121	IWL_RATE_54M_PLCP = 3,
122	IWL_RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/
123	IWL_RATE_1M_PLCP  = 10,
124	IWL_RATE_2M_PLCP  = 20,
125	IWL_RATE_5M_PLCP  = 55,
126	IWL_RATE_11M_PLCP = 110,
127	/*FIXME:RS:change to IWL_RATE_LEGACY_??M_PLCP */
128	/*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/
129};
130
131/* uCode API values for OFDM high-throughput (HT) bit rates */
132enum {
133	IWL_RATE_SISO_6M_PLCP = 0,
134	IWL_RATE_SISO_12M_PLCP = 1,
135	IWL_RATE_SISO_18M_PLCP = 2,
136	IWL_RATE_SISO_24M_PLCP = 3,
137	IWL_RATE_SISO_36M_PLCP = 4,
138	IWL_RATE_SISO_48M_PLCP = 5,
139	IWL_RATE_SISO_54M_PLCP = 6,
140	IWL_RATE_SISO_60M_PLCP = 7,
141	IWL_RATE_MIMO2_6M_PLCP  = 0x8,
142	IWL_RATE_MIMO2_12M_PLCP = 0x9,
143	IWL_RATE_MIMO2_18M_PLCP = 0xa,
144	IWL_RATE_MIMO2_24M_PLCP = 0xb,
145	IWL_RATE_MIMO2_36M_PLCP = 0xc,
146	IWL_RATE_MIMO2_48M_PLCP = 0xd,
147	IWL_RATE_MIMO2_54M_PLCP = 0xe,
148	IWL_RATE_MIMO2_60M_PLCP = 0xf,
149	IWL_RATE_MIMO3_6M_PLCP  = 0x10,
150	IWL_RATE_MIMO3_12M_PLCP = 0x11,
151	IWL_RATE_MIMO3_18M_PLCP = 0x12,
152	IWL_RATE_MIMO3_24M_PLCP = 0x13,
153	IWL_RATE_MIMO3_36M_PLCP = 0x14,
154	IWL_RATE_MIMO3_48M_PLCP = 0x15,
155	IWL_RATE_MIMO3_54M_PLCP = 0x16,
156	IWL_RATE_MIMO3_60M_PLCP = 0x17,
157	IWL_RATE_SISO_INVM_PLCP,
158	IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP,
159	IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP,
160};
161
162/* MAC header values for bit rates */
163enum {
164	IWL_RATE_6M_IEEE  = 12,
165	IWL_RATE_9M_IEEE  = 18,
166	IWL_RATE_12M_IEEE = 24,
167	IWL_RATE_18M_IEEE = 36,
168	IWL_RATE_24M_IEEE = 48,
169	IWL_RATE_36M_IEEE = 72,
170	IWL_RATE_48M_IEEE = 96,
171	IWL_RATE_54M_IEEE = 108,
172	IWL_RATE_60M_IEEE = 120,
173	IWL_RATE_1M_IEEE  = 2,
174	IWL_RATE_2M_IEEE  = 4,
175	IWL_RATE_5M_IEEE  = 11,
176	IWL_RATE_11M_IEEE = 22,
177};
178
179#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1)
180
181#define IWL_INVALID_VALUE    -1
182
183#define IWL_MIN_RSSI_VAL                 -100
184#define IWL_MAX_RSSI_VAL                    0
185
186/* These values specify how many Tx frame attempts before
187 * searching for a new modulation mode */
188#define IWL_LEGACY_FAILURE_LIMIT	160
189#define IWL_LEGACY_SUCCESS_LIMIT	480
190#define IWL_LEGACY_TABLE_COUNT		160
191
192#define IWL_NONE_LEGACY_FAILURE_LIMIT	400
193#define IWL_NONE_LEGACY_SUCCESS_LIMIT	4500
194#define IWL_NONE_LEGACY_TABLE_COUNT	1500
195
196/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */
197#define IWL_RS_GOOD_RATIO		12800	/* 100% */
198#define IWL_RATE_SCALE_SWITCH		10880	/*  85% */
199#define IWL_RATE_HIGH_TH		10880	/*  85% */
200#define IWL_RATE_INCREASE_TH		6400	/*  50% */
201#define IWL_RATE_DECREASE_TH		1920	/*  15% */
202
203/* possible actions when in legacy mode */
204#define IWL_LEGACY_SWITCH_ANTENNA1      0
205#define IWL_LEGACY_SWITCH_ANTENNA2      1
206#define IWL_LEGACY_SWITCH_SISO          2
207#define IWL_LEGACY_SWITCH_MIMO2_AB      3
208#define IWL_LEGACY_SWITCH_MIMO2_AC      4
209#define IWL_LEGACY_SWITCH_MIMO2_BC      5
210#define IWL_LEGACY_SWITCH_MIMO3_ABC     6
211
212/* possible actions when in siso mode */
213#define IWL_SISO_SWITCH_ANTENNA1        0
214#define IWL_SISO_SWITCH_ANTENNA2        1
215#define IWL_SISO_SWITCH_MIMO2_AB        2
216#define IWL_SISO_SWITCH_MIMO2_AC        3
217#define IWL_SISO_SWITCH_MIMO2_BC        4
218#define IWL_SISO_SWITCH_GI              5
219#define IWL_SISO_SWITCH_MIMO3_ABC       6
220
221
222/* possible actions when in mimo mode */
223#define IWL_MIMO2_SWITCH_ANTENNA1       0
224#define IWL_MIMO2_SWITCH_ANTENNA2       1
225#define IWL_MIMO2_SWITCH_SISO_A         2
226#define IWL_MIMO2_SWITCH_SISO_B         3
227#define IWL_MIMO2_SWITCH_SISO_C         4
228#define IWL_MIMO2_SWITCH_GI             5
229#define IWL_MIMO2_SWITCH_MIMO3_ABC      6
230
231
232/* possible actions when in mimo3 mode */
233#define IWL_MIMO3_SWITCH_ANTENNA1       0
234#define IWL_MIMO3_SWITCH_ANTENNA2       1
235#define IWL_MIMO3_SWITCH_SISO_A         2
236#define IWL_MIMO3_SWITCH_SISO_B         3
237#define IWL_MIMO3_SWITCH_SISO_C         4
238#define IWL_MIMO3_SWITCH_MIMO2_AB       5
239#define IWL_MIMO3_SWITCH_MIMO2_AC       6
240#define IWL_MIMO3_SWITCH_MIMO2_BC       7
241#define IWL_MIMO3_SWITCH_GI             8
242
243
244#define IWL_MAX_11N_MIMO3_SEARCH IWL_MIMO3_SWITCH_GI
245#define IWL_MAX_SEARCH IWL_MIMO2_SWITCH_MIMO3_ABC
246
247/*FIXME:RS:add possible actions for MIMO3*/
248
249#define IWL_ACTION_LIMIT		3	/* # possible actions */
250
251#define LQ_SIZE		2	/* 2 mode tables:  "Active" and "Search" */
252
253/* load per tid defines for A-MPDU activation */
254#define IWL_AGG_TPT_THREHOLD	0
255#define IWL_AGG_LOAD_THRESHOLD	10
256#define IWL_AGG_ALL_TID		0xff
257#define TID_QUEUE_CELL_SPACING	50	/*mS */
258#define TID_QUEUE_MAX_SIZE	20
259#define TID_ROUND_VALUE		5	/* mS */
260
261#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING)
262#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y))
263
264extern const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
265
266enum iwl_table_type {
267	LQ_NONE,
268	LQ_G,		/* legacy types */
269	LQ_A,
270	LQ_SISO,	/* high-throughput types */
271	LQ_MIMO2,
272	LQ_MIMO3,
273	LQ_MAX,
274};
275
276#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A))
277#define is_siso(tbl) ((tbl) == LQ_SISO)
278#define is_mimo2(tbl) ((tbl) == LQ_MIMO2)
279#define is_mimo3(tbl) ((tbl) == LQ_MIMO3)
280#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl))
281#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl))
282#define is_a_band(tbl) ((tbl) == LQ_A)
283#define is_g_and(tbl) ((tbl) == LQ_G)
284
285#define IWL_MAX_MCS_DISPLAY_SIZE	12
286
287struct iwl_rate_mcs_info {
288	char	mbps[IWL_MAX_MCS_DISPLAY_SIZE];
289	char	mcs[IWL_MAX_MCS_DISPLAY_SIZE];
290};
291
292/**
293 * struct iwl_rate_scale_data -- tx success history for one rate
294 */
295struct iwl_rate_scale_data {
296	u64 data;		/* bitmap of successful frames */
297	s32 success_counter;	/* number of frames successful */
298	s32 success_ratio;	/* per-cent * 128  */
299	s32 counter;		/* number of frames attempted */
300	s32 average_tpt;	/* success ratio * expected throughput */
301	unsigned long stamp;
302};
303
304/**
305 * struct iwl_scale_tbl_info -- tx params and success history for all rates
306 *
307 * There are two of these in struct iwl_lq_sta,
308 * one for "active", and one for "search".
309 */
310struct iwl_scale_tbl_info {
311	enum iwl_table_type lq_type;
312	u8 ant_type;
313	u8 is_SGI;	/* 1 = short guard interval */
314	u8 is_ht40;	/* 1 = 40 MHz channel width */
315	u8 is_dup;	/* 1 = duplicated data streams */
316	u8 action;	/* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
317	u8 max_search;	/* maximun number of tables we can search */
318	const u16 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
319	u32 current_rate;  /* rate_n_flags, uCode API format */
320	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
321};
322
323struct iwl_traffic_load {
324	unsigned long time_stamp;	/* age of the oldest statistics */
325	u32 packet_count[TID_QUEUE_MAX_SIZE];   /* packet count in this time
326						 * slice */
327	u32 total;			/* total num of packets during the
328					 * last TID_MAX_TIME_DIFF */
329	u8 queue_count;			/* number of queues that has
330					 * been used since the last cleanup */
331	u8 head;			/* start of the circular buffer */
332};
333
334/**
335 * struct iwl_lq_sta -- driver's rate scaling private structure
336 *
337 * Pointer to this gets passed back and forth between driver and mac80211.
338 */
339struct iwl_lq_sta {
340	u8 active_tbl;		/* index of active table, range 0-1 */
341	u8 enable_counter;	/* indicates HT mode */
342	u8 stay_in_tbl;		/* 1: disallow, 0: allow search for new mode */
343	u8 search_better_tbl;	/* 1: currently trying alternate mode */
344	s32 last_tpt;
345
346	/* The following determine when to search for a new mode */
347	u32 table_count_limit;
348	u32 max_failure_limit;	/* # failed frames before new search */
349	u32 max_success_limit;	/* # successful frames before new search */
350	u32 table_count;
351	u32 total_failed;	/* total failed frames, any/all rates */
352	u32 total_success;	/* total successful frames, any/all rates */
353	u64 flush_timer;	/* time staying in mode before new search */
354
355	u8 action_counter;	/* # mode-switch actions tried */
356	u8 is_green;
357	u8 is_dup;
358	enum ieee80211_band band;
359
360	/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
361	u32 supp_rates;
362	u16 active_legacy_rate;
363	u16 active_siso_rate;
364	u16 active_mimo2_rate;
365	u16 active_mimo3_rate;
366	s8 max_rate_idx;     /* Max rate set by user */
367	u8 missed_rate_counter;
368
369	struct iwl_link_quality_cmd lq;
370	struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
371	struct iwl_traffic_load load[IWL_MAX_TID_COUNT];
372	u8 tx_agg_tid_en;
373#ifdef CONFIG_MAC80211_DEBUGFS
374	struct dentry *rs_sta_dbgfs_scale_table_file;
375	struct dentry *rs_sta_dbgfs_stats_table_file;
376	struct dentry *rs_sta_dbgfs_rate_scale_data_file;
377	struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
378	u32 dbg_fixed_rate;
379#endif
380	struct iwl_priv *drv;
381
382	/* used to be in sta_info */
383	int last_txrate_idx;
384	/* last tx rate_n_flags */
385	u32 last_rate_n_flags;
386	/* packets destined for this STA are aggregated */
387	u8 is_agg;
388	/* BT traffic this sta was last updated in */
389	u8 last_bt_traffic;
390};
391
392static inline u8 first_antenna(u8 mask)
393{
394	if (mask & ANT_A)
395		return ANT_A;
396	if (mask & ANT_B)
397		return ANT_B;
398	return ANT_C;
399}
400
401
402/* Initialize station's rate scaling information after adding station */
403void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta,
404		      u8 sta_id);
405
406/**
407 * iwl_rate_control_register - Register the rate control algorithm callbacks
408 *
409 * Since the rate control algorithm is hardware specific, there is no need
410 * or reason to place it as a stand alone module.  The driver can call
411 * iwl_rate_control_register in order to register the rate control callbacks
412 * with the mac80211 subsystem.  This should be performed prior to calling
413 * ieee80211_register_hw
414 *
415 */
416int iwlagn_rate_control_register(void);
417
418/**
419 * iwl_rate_control_unregister - Unregister the rate control callbacks
420 *
421 * This should be called after calling ieee80211_unregister_hw, but before
422 * the driver is unloaded.
423 */
424void iwlagn_rate_control_unregister(void);
425
426#endif /* __iwl_agn__rs__ */
427