1/*
2 * linux/fs/jbd2/recovery.c
3 *
4 * Written by Stephen C. Tweedie <sct@redhat.com>, 1999
5 *
6 * Copyright 1999-2000 Red Hat Software --- All Rights Reserved
7 *
8 * This file is part of the Linux kernel and is made available under
9 * the terms of the GNU General Public License, version 2, or at your
10 * option, any later version, incorporated herein by reference.
11 *
12 * Journal recovery routines for the generic filesystem journaling code;
13 * part of the ext2fs journaling system.
14 */
15
16#ifndef __KERNEL__
17#include "jfs_user.h"
18#else
19#include <linux/time.h>
20#include <linux/fs.h>
21#include <linux/jbd2.h>
22#include <linux/errno.h>
23#include <linux/crc32.h>
24#include <linux/blkdev.h>
25#endif
26
27/*
28 * Maintain information about the progress of the recovery job, so that
29 * the different passes can carry information between them.
30 */
31struct recovery_info
32{
33	tid_t		start_transaction;
34	tid_t		end_transaction;
35
36	int		nr_replays;
37	int		nr_revokes;
38	int		nr_revoke_hits;
39};
40
41enum passtype {PASS_SCAN, PASS_REVOKE, PASS_REPLAY};
42static int do_one_pass(journal_t *journal,
43				struct recovery_info *info, enum passtype pass);
44static int scan_revoke_records(journal_t *, struct buffer_head *,
45				tid_t, struct recovery_info *);
46
47#ifdef __KERNEL__
48
49/* Release readahead buffers after use */
50static void journal_brelse_array(struct buffer_head *b[], int n)
51{
52	while (--n >= 0)
53		brelse (b[n]);
54}
55
56
57/*
58 * When reading from the journal, we are going through the block device
59 * layer directly and so there is no readahead being done for us.  We
60 * need to implement any readahead ourselves if we want it to happen at
61 * all.  Recovery is basically one long sequential read, so make sure we
62 * do the IO in reasonably large chunks.
63 *
64 * This is not so critical that we need to be enormously clever about
65 * the readahead size, though.  128K is a purely arbitrary, good-enough
66 * fixed value.
67 */
68
69#define MAXBUF 8
70static int do_readahead(journal_t *journal, unsigned int start)
71{
72	int err;
73	unsigned int max, nbufs, next;
74	unsigned long long blocknr;
75	struct buffer_head *bh;
76
77	struct buffer_head * bufs[MAXBUF];
78
79	/* Do up to 128K of readahead */
80	max = start + (128 * 1024 / journal->j_blocksize);
81	if (max > journal->j_maxlen)
82		max = journal->j_maxlen;
83
84	/* Do the readahead itself.  We'll submit MAXBUF buffer_heads at
85	 * a time to the block device IO layer. */
86
87	nbufs = 0;
88
89	for (next = start; next < max; next++) {
90		err = jbd2_journal_bmap(journal, next, &blocknr);
91
92		if (err) {
93			printk(KERN_ERR "JBD2: bad block at offset %u\n",
94				next);
95			goto failed;
96		}
97
98		bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
99		if (!bh) {
100			err = -ENOMEM;
101			goto failed;
102		}
103
104		if (!buffer_uptodate(bh) && !buffer_locked(bh)) {
105			bufs[nbufs++] = bh;
106			if (nbufs == MAXBUF) {
107				ll_rw_block(READ, nbufs, bufs);
108				journal_brelse_array(bufs, nbufs);
109				nbufs = 0;
110			}
111		} else
112			brelse(bh);
113	}
114
115	if (nbufs)
116		ll_rw_block(READ, nbufs, bufs);
117	err = 0;
118
119failed:
120	if (nbufs)
121		journal_brelse_array(bufs, nbufs);
122	return err;
123}
124
125#endif /* __KERNEL__ */
126
127
128/*
129 * Read a block from the journal
130 */
131
132static int jread(struct buffer_head **bhp, journal_t *journal,
133		 unsigned int offset)
134{
135	int err;
136	unsigned long long blocknr;
137	struct buffer_head *bh;
138
139	*bhp = NULL;
140
141	if (offset >= journal->j_maxlen) {
142		printk(KERN_ERR "JBD2: corrupted journal superblock\n");
143		return -EIO;
144	}
145
146	err = jbd2_journal_bmap(journal, offset, &blocknr);
147
148	if (err) {
149		printk(KERN_ERR "JBD2: bad block at offset %u\n",
150			offset);
151		return err;
152	}
153
154	bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
155	if (!bh)
156		return -ENOMEM;
157
158	if (!buffer_uptodate(bh)) {
159		/* If this is a brand new buffer, start readahead.
160                   Otherwise, we assume we are already reading it.  */
161		if (!buffer_req(bh))
162			do_readahead(journal, offset);
163		wait_on_buffer(bh);
164	}
165
166	if (!buffer_uptodate(bh)) {
167		printk(KERN_ERR "JBD2: Failed to read block at offset %u\n",
168			offset);
169		brelse(bh);
170		return -EIO;
171	}
172
173	*bhp = bh;
174	return 0;
175}
176
177static int jbd2_descr_block_csum_verify(journal_t *j,
178					void *buf)
179{
180	struct jbd2_journal_block_tail *tail;
181	__be32 provided;
182	__u32 calculated;
183
184	if (!jbd2_journal_has_csum_v2or3(j))
185		return 1;
186
187	tail = (struct jbd2_journal_block_tail *)(buf + j->j_blocksize -
188			sizeof(struct jbd2_journal_block_tail));
189	provided = tail->t_checksum;
190	tail->t_checksum = 0;
191	calculated = jbd2_chksum(j, j->j_csum_seed, buf, j->j_blocksize);
192	tail->t_checksum = provided;
193
194	return provided == cpu_to_be32(calculated);
195}
196
197/*
198 * Count the number of in-use tags in a journal descriptor block.
199 */
200
201static int count_tags(journal_t *journal, struct buffer_head *bh)
202{
203	char *			tagp;
204	journal_block_tag_t *	tag;
205	int			nr = 0, size = journal->j_blocksize;
206	int			tag_bytes = journal_tag_bytes(journal);
207
208	if (jbd2_journal_has_csum_v2or3(journal))
209		size -= sizeof(struct jbd2_journal_block_tail);
210
211	tagp = &bh->b_data[sizeof(journal_header_t)];
212
213	while ((tagp - bh->b_data + tag_bytes) <= size) {
214		tag = (journal_block_tag_t *) tagp;
215
216		nr++;
217		tagp += tag_bytes;
218		if (!(tag->t_flags & cpu_to_be16(JBD2_FLAG_SAME_UUID)))
219			tagp += 16;
220
221		if (tag->t_flags & cpu_to_be16(JBD2_FLAG_LAST_TAG))
222			break;
223	}
224
225	return nr;
226}
227
228
229/* Make sure we wrap around the log correctly! */
230#define wrap(journal, var)						\
231do {									\
232	if (var >= (journal)->j_last)					\
233		var -= ((journal)->j_last - (journal)->j_first);	\
234} while (0)
235
236/**
237 * jbd2_journal_recover - recovers a on-disk journal
238 * @journal: the journal to recover
239 *
240 * The primary function for recovering the log contents when mounting a
241 * journaled device.
242 *
243 * Recovery is done in three passes.  In the first pass, we look for the
244 * end of the log.  In the second, we assemble the list of revoke
245 * blocks.  In the third and final pass, we replay any un-revoked blocks
246 * in the log.
247 */
248int jbd2_journal_recover(journal_t *journal)
249{
250	int			err, err2;
251	journal_superblock_t *	sb;
252
253	struct recovery_info	info;
254
255	memset(&info, 0, sizeof(info));
256	sb = journal->j_superblock;
257
258	/*
259	 * The journal superblock's s_start field (the current log head)
260	 * is always zero if, and only if, the journal was cleanly
261	 * unmounted.
262	 */
263
264	if (!sb->s_start) {
265		jbd_debug(1, "No recovery required, last transaction %d\n",
266			  be32_to_cpu(sb->s_sequence));
267		journal->j_transaction_sequence = be32_to_cpu(sb->s_sequence) + 1;
268		return 0;
269	}
270
271	err = do_one_pass(journal, &info, PASS_SCAN);
272	if (!err)
273		err = do_one_pass(journal, &info, PASS_REVOKE);
274	if (!err)
275		err = do_one_pass(journal, &info, PASS_REPLAY);
276
277	jbd_debug(1, "JBD2: recovery, exit status %d, "
278		  "recovered transactions %u to %u\n",
279		  err, info.start_transaction, info.end_transaction);
280	jbd_debug(1, "JBD2: Replayed %d and revoked %d/%d blocks\n",
281		  info.nr_replays, info.nr_revoke_hits, info.nr_revokes);
282
283	/* Restart the log at the next transaction ID, thus invalidating
284	 * any existing commit records in the log. */
285	journal->j_transaction_sequence = ++info.end_transaction;
286
287	jbd2_journal_clear_revoke(journal);
288	err2 = sync_blockdev(journal->j_fs_dev);
289	if (!err)
290		err = err2;
291	/* Make sure all replayed data is on permanent storage */
292	if (journal->j_flags & JBD2_BARRIER) {
293		err2 = blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL);
294		if (!err)
295			err = err2;
296	}
297	return err;
298}
299
300/**
301 * jbd2_journal_skip_recovery - Start journal and wipe exiting records
302 * @journal: journal to startup
303 *
304 * Locate any valid recovery information from the journal and set up the
305 * journal structures in memory to ignore it (presumably because the
306 * caller has evidence that it is out of date).
307 * This function does'nt appear to be exorted..
308 *
309 * We perform one pass over the journal to allow us to tell the user how
310 * much recovery information is being erased, and to let us initialise
311 * the journal transaction sequence numbers to the next unused ID.
312 */
313int jbd2_journal_skip_recovery(journal_t *journal)
314{
315	int			err;
316
317	struct recovery_info	info;
318
319	memset (&info, 0, sizeof(info));
320
321	err = do_one_pass(journal, &info, PASS_SCAN);
322
323	if (err) {
324		printk(KERN_ERR "JBD2: error %d scanning journal\n", err);
325		++journal->j_transaction_sequence;
326	} else {
327#ifdef CONFIG_JBD2_DEBUG
328		int dropped = info.end_transaction -
329			be32_to_cpu(journal->j_superblock->s_sequence);
330		jbd_debug(1,
331			  "JBD2: ignoring %d transaction%s from the journal.\n",
332			  dropped, (dropped == 1) ? "" : "s");
333#endif
334		journal->j_transaction_sequence = ++info.end_transaction;
335	}
336
337	journal->j_tail = 0;
338	return err;
339}
340
341static inline unsigned long long read_tag_block(journal_t *journal,
342						journal_block_tag_t *tag)
343{
344	unsigned long long block = be32_to_cpu(tag->t_blocknr);
345	if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_64BIT))
346		block |= (u64)be32_to_cpu(tag->t_blocknr_high) << 32;
347	return block;
348}
349
350/*
351 * calc_chksums calculates the checksums for the blocks described in the
352 * descriptor block.
353 */
354static int calc_chksums(journal_t *journal, struct buffer_head *bh,
355			unsigned long *next_log_block, __u32 *crc32_sum)
356{
357	int i, num_blks, err;
358	unsigned long io_block;
359	struct buffer_head *obh;
360
361	num_blks = count_tags(journal, bh);
362	/* Calculate checksum of the descriptor block. */
363	*crc32_sum = crc32_be(*crc32_sum, (void *)bh->b_data, bh->b_size);
364
365	for (i = 0; i < num_blks; i++) {
366		io_block = (*next_log_block)++;
367		wrap(journal, *next_log_block);
368		err = jread(&obh, journal, io_block);
369		if (err) {
370			printk(KERN_ERR "JBD2: IO error %d recovering block "
371				"%lu in log\n", err, io_block);
372			return 1;
373		} else {
374			*crc32_sum = crc32_be(*crc32_sum, (void *)obh->b_data,
375				     obh->b_size);
376		}
377		put_bh(obh);
378	}
379	return 0;
380}
381
382static int jbd2_commit_block_csum_verify(journal_t *j, void *buf)
383{
384	struct commit_header *h;
385	__be32 provided;
386	__u32 calculated;
387
388	if (!jbd2_journal_has_csum_v2or3(j))
389		return 1;
390
391	h = buf;
392	provided = h->h_chksum[0];
393	h->h_chksum[0] = 0;
394	calculated = jbd2_chksum(j, j->j_csum_seed, buf, j->j_blocksize);
395	h->h_chksum[0] = provided;
396
397	return provided == cpu_to_be32(calculated);
398}
399
400static int jbd2_block_tag_csum_verify(journal_t *j, journal_block_tag_t *tag,
401				      void *buf, __u32 sequence)
402{
403	journal_block_tag3_t *tag3 = (journal_block_tag3_t *)tag;
404	__u32 csum32;
405	__be32 seq;
406
407	if (!jbd2_journal_has_csum_v2or3(j))
408		return 1;
409
410	seq = cpu_to_be32(sequence);
411	csum32 = jbd2_chksum(j, j->j_csum_seed, (__u8 *)&seq, sizeof(seq));
412	csum32 = jbd2_chksum(j, csum32, buf, j->j_blocksize);
413
414	if (JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V3))
415		return tag3->t_checksum == cpu_to_be32(csum32);
416	else
417		return tag->t_checksum == cpu_to_be16(csum32);
418}
419
420static int do_one_pass(journal_t *journal,
421			struct recovery_info *info, enum passtype pass)
422{
423	unsigned int		first_commit_ID, next_commit_ID;
424	unsigned long		next_log_block;
425	int			err, success = 0;
426	journal_superblock_t *	sb;
427	journal_header_t *	tmp;
428	struct buffer_head *	bh;
429	unsigned int		sequence;
430	int			blocktype;
431	int			tag_bytes = journal_tag_bytes(journal);
432	__u32			crc32_sum = ~0; /* Transactional Checksums */
433	int			descr_csum_size = 0;
434	int			block_error = 0;
435
436	/*
437	 * First thing is to establish what we expect to find in the log
438	 * (in terms of transaction IDs), and where (in terms of log
439	 * block offsets): query the superblock.
440	 */
441
442	sb = journal->j_superblock;
443	next_commit_ID = be32_to_cpu(sb->s_sequence);
444	next_log_block = be32_to_cpu(sb->s_start);
445
446	first_commit_ID = next_commit_ID;
447	if (pass == PASS_SCAN)
448		info->start_transaction = first_commit_ID;
449
450	jbd_debug(1, "Starting recovery pass %d\n", pass);
451
452	/*
453	 * Now we walk through the log, transaction by transaction,
454	 * making sure that each transaction has a commit block in the
455	 * expected place.  Each complete transaction gets replayed back
456	 * into the main filesystem.
457	 */
458
459	while (1) {
460		int			flags;
461		char *			tagp;
462		journal_block_tag_t *	tag;
463		struct buffer_head *	obh;
464		struct buffer_head *	nbh;
465
466		cond_resched();
467
468		/* If we already know where to stop the log traversal,
469		 * check right now that we haven't gone past the end of
470		 * the log. */
471
472		if (pass != PASS_SCAN)
473			if (tid_geq(next_commit_ID, info->end_transaction))
474				break;
475
476		jbd_debug(2, "Scanning for sequence ID %u at %lu/%lu\n",
477			  next_commit_ID, next_log_block, journal->j_last);
478
479		/* Skip over each chunk of the transaction looking
480		 * either the next descriptor block or the final commit
481		 * record. */
482
483		jbd_debug(3, "JBD2: checking block %ld\n", next_log_block);
484		err = jread(&bh, journal, next_log_block);
485		if (err)
486			goto failed;
487
488		next_log_block++;
489		wrap(journal, next_log_block);
490
491		/* What kind of buffer is it?
492		 *
493		 * If it is a descriptor block, check that it has the
494		 * expected sequence number.  Otherwise, we're all done
495		 * here. */
496
497		tmp = (journal_header_t *)bh->b_data;
498
499		if (tmp->h_magic != cpu_to_be32(JBD2_MAGIC_NUMBER)) {
500			brelse(bh);
501			break;
502		}
503
504		blocktype = be32_to_cpu(tmp->h_blocktype);
505		sequence = be32_to_cpu(tmp->h_sequence);
506		jbd_debug(3, "Found magic %d, sequence %d\n",
507			  blocktype, sequence);
508
509		if (sequence != next_commit_ID) {
510			brelse(bh);
511			break;
512		}
513
514		/* OK, we have a valid descriptor block which matches
515		 * all of the sequence number checks.  What are we going
516		 * to do with it?  That depends on the pass... */
517
518		switch(blocktype) {
519		case JBD2_DESCRIPTOR_BLOCK:
520			/* Verify checksum first */
521			if (jbd2_journal_has_csum_v2or3(journal))
522				descr_csum_size =
523					sizeof(struct jbd2_journal_block_tail);
524			if (descr_csum_size > 0 &&
525			    !jbd2_descr_block_csum_verify(journal,
526							  bh->b_data)) {
527				printk(KERN_ERR "JBD2: Invalid checksum "
528				       "recovering block %lu in log\n",
529				       next_log_block);
530				err = -EIO;
531				brelse(bh);
532				goto failed;
533			}
534
535			/* If it is a valid descriptor block, replay it
536			 * in pass REPLAY; if journal_checksums enabled, then
537			 * calculate checksums in PASS_SCAN, otherwise,
538			 * just skip over the blocks it describes. */
539			if (pass != PASS_REPLAY) {
540				if (pass == PASS_SCAN &&
541				    JBD2_HAS_COMPAT_FEATURE(journal,
542					    JBD2_FEATURE_COMPAT_CHECKSUM) &&
543				    !info->end_transaction) {
544					if (calc_chksums(journal, bh,
545							&next_log_block,
546							&crc32_sum)) {
547						put_bh(bh);
548						break;
549					}
550					put_bh(bh);
551					continue;
552				}
553				next_log_block += count_tags(journal, bh);
554				wrap(journal, next_log_block);
555				put_bh(bh);
556				continue;
557			}
558
559			/* A descriptor block: we can now write all of
560			 * the data blocks.  Yay, useful work is finally
561			 * getting done here! */
562
563			tagp = &bh->b_data[sizeof(journal_header_t)];
564			while ((tagp - bh->b_data + tag_bytes)
565			       <= journal->j_blocksize - descr_csum_size) {
566				unsigned long io_block;
567
568				tag = (journal_block_tag_t *) tagp;
569				flags = be16_to_cpu(tag->t_flags);
570
571				io_block = next_log_block++;
572				wrap(journal, next_log_block);
573				err = jread(&obh, journal, io_block);
574				if (err) {
575					/* Recover what we can, but
576					 * report failure at the end. */
577					success = err;
578					printk(KERN_ERR
579						"JBD2: IO error %d recovering "
580						"block %ld in log\n",
581						err, io_block);
582				} else {
583					unsigned long long blocknr;
584
585					J_ASSERT(obh != NULL);
586					blocknr = read_tag_block(journal,
587								 tag);
588
589					/* If the block has been
590					 * revoked, then we're all done
591					 * here. */
592					if (jbd2_journal_test_revoke
593					    (journal, blocknr,
594					     next_commit_ID)) {
595						brelse(obh);
596						++info->nr_revoke_hits;
597						goto skip_write;
598					}
599
600					/* Look for block corruption */
601					if (!jbd2_block_tag_csum_verify(
602						journal, tag, obh->b_data,
603						be32_to_cpu(tmp->h_sequence))) {
604						brelse(obh);
605						success = -EIO;
606						printk(KERN_ERR "JBD2: Invalid "
607						       "checksum recovering "
608						       "block %llu in log\n",
609						       blocknr);
610						block_error = 1;
611						goto skip_write;
612					}
613
614					/* Find a buffer for the new
615					 * data being restored */
616					nbh = __getblk(journal->j_fs_dev,
617							blocknr,
618							journal->j_blocksize);
619					if (nbh == NULL) {
620						printk(KERN_ERR
621						       "JBD2: Out of memory "
622						       "during recovery.\n");
623						err = -ENOMEM;
624						brelse(bh);
625						brelse(obh);
626						goto failed;
627					}
628
629					lock_buffer(nbh);
630					memcpy(nbh->b_data, obh->b_data,
631							journal->j_blocksize);
632					if (flags & JBD2_FLAG_ESCAPE) {
633						*((__be32 *)nbh->b_data) =
634						cpu_to_be32(JBD2_MAGIC_NUMBER);
635					}
636
637					BUFFER_TRACE(nbh, "marking dirty");
638					set_buffer_uptodate(nbh);
639					mark_buffer_dirty(nbh);
640					BUFFER_TRACE(nbh, "marking uptodate");
641					++info->nr_replays;
642					/* ll_rw_block(WRITE, 1, &nbh); */
643					unlock_buffer(nbh);
644					brelse(obh);
645					brelse(nbh);
646				}
647
648			skip_write:
649				tagp += tag_bytes;
650				if (!(flags & JBD2_FLAG_SAME_UUID))
651					tagp += 16;
652
653				if (flags & JBD2_FLAG_LAST_TAG)
654					break;
655			}
656
657			brelse(bh);
658			continue;
659
660		case JBD2_COMMIT_BLOCK:
661			/*     How to differentiate between interrupted commit
662			 *               and journal corruption ?
663			 *
664			 * {nth transaction}
665			 *        Checksum Verification Failed
666			 *			 |
667			 *		 ____________________
668			 *		|		     |
669			 * 	async_commit             sync_commit
670			 *     		|                    |
671			 *		| GO TO NEXT    "Journal Corruption"
672			 *		| TRANSACTION
673			 *		|
674			 * {(n+1)th transanction}
675			 *		|
676			 * 	 _______|______________
677			 * 	|	 	      |
678			 * Commit block found	Commit block not found
679			 *      |		      |
680			 * "Journal Corruption"       |
681			 *		 _____________|_________
682			 *     		|	           	|
683			 *	nth trans corrupt	OR   nth trans
684			 *	and (n+1)th interrupted     interrupted
685			 *	before commit block
686			 *      could reach the disk.
687			 *	(Cannot find the difference in above
688			 *	 mentioned conditions. Hence assume
689			 *	 "Interrupted Commit".)
690			 */
691
692			/* Found an expected commit block: if checksums
693			 * are present verify them in PASS_SCAN; else not
694			 * much to do other than move on to the next sequence
695			 * number. */
696			if (pass == PASS_SCAN &&
697			    JBD2_HAS_COMPAT_FEATURE(journal,
698				    JBD2_FEATURE_COMPAT_CHECKSUM)) {
699				int chksum_err, chksum_seen;
700				struct commit_header *cbh =
701					(struct commit_header *)bh->b_data;
702				unsigned found_chksum =
703					be32_to_cpu(cbh->h_chksum[0]);
704
705				chksum_err = chksum_seen = 0;
706
707				if (info->end_transaction) {
708					journal->j_failed_commit =
709						info->end_transaction;
710					brelse(bh);
711					break;
712				}
713
714				if (crc32_sum == found_chksum &&
715				    cbh->h_chksum_type == JBD2_CRC32_CHKSUM &&
716				    cbh->h_chksum_size ==
717						JBD2_CRC32_CHKSUM_SIZE)
718				       chksum_seen = 1;
719				else if (!(cbh->h_chksum_type == 0 &&
720					     cbh->h_chksum_size == 0 &&
721					     found_chksum == 0 &&
722					     !chksum_seen))
723				/*
724				 * If fs is mounted using an old kernel and then
725				 * kernel with journal_chksum is used then we
726				 * get a situation where the journal flag has
727				 * checksum flag set but checksums are not
728				 * present i.e chksum = 0, in the individual
729				 * commit blocks.
730				 * Hence to avoid checksum failures, in this
731				 * situation, this extra check is added.
732				 */
733						chksum_err = 1;
734
735				if (chksum_err) {
736					info->end_transaction = next_commit_ID;
737
738					if (!JBD2_HAS_INCOMPAT_FEATURE(journal,
739					   JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)){
740						journal->j_failed_commit =
741							next_commit_ID;
742						brelse(bh);
743						break;
744					}
745				}
746				crc32_sum = ~0;
747			}
748			if (pass == PASS_SCAN &&
749			    !jbd2_commit_block_csum_verify(journal,
750							   bh->b_data)) {
751				info->end_transaction = next_commit_ID;
752
753				if (!JBD2_HAS_INCOMPAT_FEATURE(journal,
754				     JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) {
755					journal->j_failed_commit =
756						next_commit_ID;
757					brelse(bh);
758					break;
759				}
760			}
761			brelse(bh);
762			next_commit_ID++;
763			continue;
764
765		case JBD2_REVOKE_BLOCK:
766			/* If we aren't in the REVOKE pass, then we can
767			 * just skip over this block. */
768			if (pass != PASS_REVOKE) {
769				brelse(bh);
770				continue;
771			}
772
773			err = scan_revoke_records(journal, bh,
774						  next_commit_ID, info);
775			brelse(bh);
776			if (err)
777				goto failed;
778			continue;
779
780		default:
781			jbd_debug(3, "Unrecognised magic %d, end of scan.\n",
782				  blocktype);
783			brelse(bh);
784			goto done;
785		}
786	}
787
788 done:
789	/*
790	 * We broke out of the log scan loop: either we came to the
791	 * known end of the log or we found an unexpected block in the
792	 * log.  If the latter happened, then we know that the "current"
793	 * transaction marks the end of the valid log.
794	 */
795
796	if (pass == PASS_SCAN) {
797		if (!info->end_transaction)
798			info->end_transaction = next_commit_ID;
799	} else {
800		/* It's really bad news if different passes end up at
801		 * different places (but possible due to IO errors). */
802		if (info->end_transaction != next_commit_ID) {
803			printk(KERN_ERR "JBD2: recovery pass %d ended at "
804				"transaction %u, expected %u\n",
805				pass, next_commit_ID, info->end_transaction);
806			if (!success)
807				success = -EIO;
808		}
809	}
810	if (block_error && success == 0)
811		success = -EIO;
812	return success;
813
814 failed:
815	return err;
816}
817
818static int jbd2_revoke_block_csum_verify(journal_t *j,
819					 void *buf)
820{
821	struct jbd2_journal_revoke_tail *tail;
822	__be32 provided;
823	__u32 calculated;
824
825	if (!jbd2_journal_has_csum_v2or3(j))
826		return 1;
827
828	tail = (struct jbd2_journal_revoke_tail *)(buf + j->j_blocksize -
829			sizeof(struct jbd2_journal_revoke_tail));
830	provided = tail->r_checksum;
831	tail->r_checksum = 0;
832	calculated = jbd2_chksum(j, j->j_csum_seed, buf, j->j_blocksize);
833	tail->r_checksum = provided;
834
835	return provided == cpu_to_be32(calculated);
836}
837
838/* Scan a revoke record, marking all blocks mentioned as revoked. */
839
840static int scan_revoke_records(journal_t *journal, struct buffer_head *bh,
841			       tid_t sequence, struct recovery_info *info)
842{
843	jbd2_journal_revoke_header_t *header;
844	int offset, max;
845	int csum_size = 0;
846	__u32 rcount;
847	int record_len = 4;
848
849	header = (jbd2_journal_revoke_header_t *) bh->b_data;
850	offset = sizeof(jbd2_journal_revoke_header_t);
851	rcount = be32_to_cpu(header->r_count);
852
853	if (!jbd2_revoke_block_csum_verify(journal, header))
854		return -EINVAL;
855
856	if (jbd2_journal_has_csum_v2or3(journal))
857		csum_size = sizeof(struct jbd2_journal_revoke_tail);
858	if (rcount > journal->j_blocksize - csum_size)
859		return -EINVAL;
860	max = rcount;
861
862	if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_64BIT))
863		record_len = 8;
864
865	while (offset + record_len <= max) {
866		unsigned long long blocknr;
867		int err;
868
869		if (record_len == 4)
870			blocknr = be32_to_cpu(* ((__be32 *) (bh->b_data+offset)));
871		else
872			blocknr = be64_to_cpu(* ((__be64 *) (bh->b_data+offset)));
873		offset += record_len;
874		err = jbd2_journal_set_revoke(journal, blocknr, sequence);
875		if (err)
876			return err;
877		++info->nr_revokes;
878	}
879	return 0;
880}
881