1/* linux/include/asm-arm/arch-msm/hsusb.h
2 *
3 * Copyright (C) 2008 Google, Inc.
4 * Author: Brian Swetland <swetland@google.com>
5 * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
6 *
7 * This software is licensed under the terms of the GNU General Public
8 * License version 2, as published by the Free Software Foundation, and
9 * may be copied, distributed, and modified under those terms.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14 * GNU General Public License for more details.
15 *
16 */
17
18#ifndef __ASM_ARCH_MSM_HSUSB_H
19#define __ASM_ARCH_MSM_HSUSB_H
20
21#include <linux/types.h>
22#include <linux/usb/otg.h>
23#include <linux/clk.h>
24
25/**
26 * OTG control
27 *
28 * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
29 *                      only configuration.
30 * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
31 * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
32 * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
33 *
34 */
35enum otg_control_type {
36	OTG_NO_CONTROL = 0,
37	OTG_PHY_CONTROL,
38	OTG_PMIC_CONTROL,
39	OTG_USER_CONTROL,
40};
41
42/**
43 * PHY used in
44 *
45 * INVALID_PHY			Unsupported PHY
46 * CI_45NM_INTEGRATED_PHY	Chipidea 45nm integrated PHY
47 * SNPS_28NM_INTEGRATED_PHY	Synopsis 28nm integrated PHY
48 *
49 */
50enum msm_usb_phy_type {
51	INVALID_PHY = 0,
52	CI_45NM_INTEGRATED_PHY,
53	SNPS_28NM_INTEGRATED_PHY,
54};
55
56#define IDEV_CHG_MAX	1500
57#define IUNIT		100
58
59/**
60 * Different states involved in USB charger detection.
61 *
62 * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
63 *                              process is not yet started.
64 * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
65 * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
66 * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
67 *                              between SDP and DCP/CDP).
68 * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
69 *                              between DCP and CDP).
70 * USB_CHG_STATE_DETECTED	USB charger type is determined.
71 *
72 */
73enum usb_chg_state {
74	USB_CHG_STATE_UNDEFINED = 0,
75	USB_CHG_STATE_WAIT_FOR_DCD,
76	USB_CHG_STATE_DCD_DONE,
77	USB_CHG_STATE_PRIMARY_DONE,
78	USB_CHG_STATE_SECONDARY_DONE,
79	USB_CHG_STATE_DETECTED,
80};
81
82/**
83 * USB charger types
84 *
85 * USB_INVALID_CHARGER	Invalid USB charger.
86 * USB_SDP_CHARGER	Standard downstream port. Refers to a downstream port
87 *                      on USB2.0 compliant host/hub.
88 * USB_DCP_CHARGER	Dedicated charger port (AC charger/ Wall charger).
89 * USB_CDP_CHARGER	Charging downstream port. Enumeration can happen and
90 *                      IDEV_CHG_MAX can be drawn irrespective of USB state.
91 *
92 */
93enum usb_chg_type {
94	USB_INVALID_CHARGER = 0,
95	USB_SDP_CHARGER,
96	USB_DCP_CHARGER,
97	USB_CDP_CHARGER,
98};
99
100/**
101 * struct msm_otg_platform_data - platform device data
102 *              for msm_otg driver.
103 * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
104 *              "do not overwrite default vaule at this address".
105 * @phy_init_sz: PHY configuration sequence size.
106 * @vbus_power: VBUS power on/off routine.
107 * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
108 * @mode: Supported mode (OTG/peripheral/host).
109 * @otg_control: OTG switch controlled by user/Id pin
110 */
111struct msm_otg_platform_data {
112	int *phy_init_seq;
113	int phy_init_sz;
114	void (*vbus_power)(bool on);
115	unsigned power_budget;
116	enum usb_dr_mode mode;
117	enum otg_control_type otg_control;
118	enum msm_usb_phy_type phy_type;
119	void (*setup_gpio)(enum usb_otg_state state);
120};
121
122/**
123 * struct msm_otg: OTG driver data. Shared by HCD and DCD.
124 * @otg: USB OTG Transceiver structure.
125 * @pdata: otg device platform data.
126 * @irq: IRQ number assigned for HSUSB controller.
127 * @clk: clock struct of usb_hs_clk.
128 * @pclk: clock struct of usb_hs_pclk.
129 * @core_clk: clock struct of usb_hs_core_clk.
130 * @regs: ioremapped register base address.
131 * @inputs: OTG state machine inputs(Id, SessValid etc).
132 * @sm_work: OTG state machine work.
133 * @in_lpm: indicates low power mode (LPM) state.
134 * @async_int: Async interrupt arrived.
135 * @cur_power: The amount of mA available from downstream port.
136 * @chg_work: Charger detection work.
137 * @chg_state: The state of charger detection process.
138 * @chg_type: The type of charger attached.
139 * @dcd_retires: The retry count used to track Data contact
140 *               detection process.
141 */
142struct msm_otg {
143	struct usb_phy phy;
144	struct msm_otg_platform_data *pdata;
145	int irq;
146	struct clk *clk;
147	struct clk *pclk;
148	struct clk *core_clk;
149	void __iomem *regs;
150#define ID		0
151#define B_SESS_VLD	1
152	unsigned long inputs;
153	struct work_struct sm_work;
154	atomic_t in_lpm;
155	int async_int;
156	unsigned cur_power;
157	int phy_number;
158	struct delayed_work chg_work;
159	enum usb_chg_state chg_state;
160	enum usb_chg_type chg_type;
161	u8 dcd_retries;
162	struct regulator *v3p3;
163	struct regulator *v1p8;
164	struct regulator *vddcx;
165
166	struct reset_control *phy_rst;
167	struct reset_control *link_rst;
168	int vdd_levels[3];
169};
170
171#endif
172