1/* 2 * Copyright (c) 2005 Voltaire Inc. All rights reserved. 3 * Copyright (c) 2005 Intel Corporation. All rights reserved. 4 * 5 * This software is available to you under a choice of one of two 6 * licenses. You may choose to be licensed under the terms of the GNU 7 * General Public License (GPL) Version 2, available from the file 8 * COPYING in the main directory of this source tree, or the 9 * OpenIB.org BSD license below: 10 * 11 * Redistribution and use in source and binary forms, with or 12 * without modification, are permitted provided that the following 13 * conditions are met: 14 * 15 * - Redistributions of source code must retain the above 16 * copyright notice, this list of conditions and the following 17 * disclaimer. 18 * 19 * - Redistributions in binary form must reproduce the above 20 * copyright notice, this list of conditions and the following 21 * disclaimer in the documentation and/or other materials 22 * provided with the distribution. 23 * 24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 25 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 26 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 27 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 28 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 29 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 30 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 31 * SOFTWARE. 32 */ 33 34#if !defined(RDMA_CM_H) 35#define RDMA_CM_H 36 37#include <linux/socket.h> 38#include <linux/in6.h> 39#include <rdma/ib_addr.h> 40#include <rdma/ib_sa.h> 41 42/* 43 * Upon receiving a device removal event, users must destroy the associated 44 * RDMA identifier and release all resources allocated with the device. 45 */ 46enum rdma_cm_event_type { 47 RDMA_CM_EVENT_ADDR_RESOLVED, 48 RDMA_CM_EVENT_ADDR_ERROR, 49 RDMA_CM_EVENT_ROUTE_RESOLVED, 50 RDMA_CM_EVENT_ROUTE_ERROR, 51 RDMA_CM_EVENT_CONNECT_REQUEST, 52 RDMA_CM_EVENT_CONNECT_RESPONSE, 53 RDMA_CM_EVENT_CONNECT_ERROR, 54 RDMA_CM_EVENT_UNREACHABLE, 55 RDMA_CM_EVENT_REJECTED, 56 RDMA_CM_EVENT_ESTABLISHED, 57 RDMA_CM_EVENT_DISCONNECTED, 58 RDMA_CM_EVENT_DEVICE_REMOVAL, 59 RDMA_CM_EVENT_MULTICAST_JOIN, 60 RDMA_CM_EVENT_MULTICAST_ERROR, 61 RDMA_CM_EVENT_ADDR_CHANGE, 62 RDMA_CM_EVENT_TIMEWAIT_EXIT 63}; 64 65enum rdma_port_space { 66 RDMA_PS_SDP = 0x0001, 67 RDMA_PS_IPOIB = 0x0002, 68 RDMA_PS_IB = 0x013F, 69 RDMA_PS_TCP = 0x0106, 70 RDMA_PS_UDP = 0x0111, 71}; 72 73#define RDMA_IB_IP_PS_MASK 0xFFFFFFFFFFFF0000ULL 74#define RDMA_IB_IP_PS_TCP 0x0000000001060000ULL 75#define RDMA_IB_IP_PS_UDP 0x0000000001110000ULL 76#define RDMA_IB_IP_PS_IB 0x00000000013F0000ULL 77 78struct rdma_addr { 79 struct sockaddr_storage src_addr; 80 struct sockaddr_storage dst_addr; 81 struct rdma_dev_addr dev_addr; 82}; 83 84struct rdma_route { 85 struct rdma_addr addr; 86 struct ib_sa_path_rec *path_rec; 87 int num_paths; 88}; 89 90struct rdma_conn_param { 91 const void *private_data; 92 u8 private_data_len; 93 u8 responder_resources; 94 u8 initiator_depth; 95 u8 flow_control; 96 u8 retry_count; /* ignored when accepting */ 97 u8 rnr_retry_count; 98 /* Fields below ignored if a QP is created on the rdma_cm_id. */ 99 u8 srq; 100 u32 qp_num; 101 u32 qkey; 102}; 103 104struct rdma_ud_param { 105 const void *private_data; 106 u8 private_data_len; 107 struct ib_ah_attr ah_attr; 108 u32 qp_num; 109 u32 qkey; 110}; 111 112struct rdma_cm_event { 113 enum rdma_cm_event_type event; 114 int status; 115 union { 116 struct rdma_conn_param conn; 117 struct rdma_ud_param ud; 118 } param; 119}; 120 121enum rdma_cm_state { 122 RDMA_CM_IDLE, 123 RDMA_CM_ADDR_QUERY, 124 RDMA_CM_ADDR_RESOLVED, 125 RDMA_CM_ROUTE_QUERY, 126 RDMA_CM_ROUTE_RESOLVED, 127 RDMA_CM_CONNECT, 128 RDMA_CM_DISCONNECT, 129 RDMA_CM_ADDR_BOUND, 130 RDMA_CM_LISTEN, 131 RDMA_CM_DEVICE_REMOVAL, 132 RDMA_CM_DESTROYING 133}; 134 135struct rdma_cm_id; 136 137/** 138 * rdma_cm_event_handler - Callback used to report user events. 139 * 140 * Notes: Users may not call rdma_destroy_id from this callback to destroy 141 * the passed in id, or a corresponding listen id. Returning a 142 * non-zero value from the callback will destroy the passed in id. 143 */ 144typedef int (*rdma_cm_event_handler)(struct rdma_cm_id *id, 145 struct rdma_cm_event *event); 146 147struct rdma_cm_id { 148 struct ib_device *device; 149 void *context; 150 struct ib_qp *qp; 151 rdma_cm_event_handler event_handler; 152 struct rdma_route route; 153 enum rdma_port_space ps; 154 enum ib_qp_type qp_type; 155 u8 port_num; 156}; 157 158/** 159 * rdma_create_id - Create an RDMA identifier. 160 * 161 * @event_handler: User callback invoked to report events associated with the 162 * returned rdma_id. 163 * @context: User specified context associated with the id. 164 * @ps: RDMA port space. 165 * @qp_type: type of queue pair associated with the id. 166 */ 167struct rdma_cm_id *rdma_create_id(rdma_cm_event_handler event_handler, 168 void *context, enum rdma_port_space ps, 169 enum ib_qp_type qp_type); 170 171/** 172 * rdma_destroy_id - Destroys an RDMA identifier. 173 * 174 * @id: RDMA identifier. 175 * 176 * Note: calling this function has the effect of canceling in-flight 177 * asynchronous operations associated with the id. 178 */ 179void rdma_destroy_id(struct rdma_cm_id *id); 180 181/** 182 * rdma_bind_addr - Bind an RDMA identifier to a source address and 183 * associated RDMA device, if needed. 184 * 185 * @id: RDMA identifier. 186 * @addr: Local address information. Wildcard values are permitted. 187 * 188 * This associates a source address with the RDMA identifier before calling 189 * rdma_listen. If a specific local address is given, the RDMA identifier will 190 * be bound to a local RDMA device. 191 */ 192int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr); 193 194/** 195 * rdma_resolve_addr - Resolve destination and optional source addresses 196 * from IP addresses to an RDMA address. If successful, the specified 197 * rdma_cm_id will be bound to a local device. 198 * 199 * @id: RDMA identifier. 200 * @src_addr: Source address information. This parameter may be NULL. 201 * @dst_addr: Destination address information. 202 * @timeout_ms: Time to wait for resolution to complete. 203 */ 204int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr, 205 struct sockaddr *dst_addr, int timeout_ms); 206 207/** 208 * rdma_resolve_route - Resolve the RDMA address bound to the RDMA identifier 209 * into route information needed to establish a connection. 210 * 211 * This is called on the client side of a connection. 212 * Users must have first called rdma_resolve_addr to resolve a dst_addr 213 * into an RDMA address before calling this routine. 214 */ 215int rdma_resolve_route(struct rdma_cm_id *id, int timeout_ms); 216 217/** 218 * rdma_create_qp - Allocate a QP and associate it with the specified RDMA 219 * identifier. 220 * 221 * QPs allocated to an rdma_cm_id will automatically be transitioned by the CMA 222 * through their states. 223 */ 224int rdma_create_qp(struct rdma_cm_id *id, struct ib_pd *pd, 225 struct ib_qp_init_attr *qp_init_attr); 226 227/** 228 * rdma_destroy_qp - Deallocate the QP associated with the specified RDMA 229 * identifier. 230 * 231 * Users must destroy any QP associated with an RDMA identifier before 232 * destroying the RDMA ID. 233 */ 234void rdma_destroy_qp(struct rdma_cm_id *id); 235 236/** 237 * rdma_init_qp_attr - Initializes the QP attributes for use in transitioning 238 * to a specified QP state. 239 * @id: Communication identifier associated with the QP attributes to 240 * initialize. 241 * @qp_attr: On input, specifies the desired QP state. On output, the 242 * mandatory and desired optional attributes will be set in order to 243 * modify the QP to the specified state. 244 * @qp_attr_mask: The QP attribute mask that may be used to transition the 245 * QP to the specified state. 246 * 247 * Users must set the @qp_attr->qp_state to the desired QP state. This call 248 * will set all required attributes for the given transition, along with 249 * known optional attributes. Users may override the attributes returned from 250 * this call before calling ib_modify_qp. 251 * 252 * Users that wish to have their QP automatically transitioned through its 253 * states can associate a QP with the rdma_cm_id by calling rdma_create_qp(). 254 */ 255int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr, 256 int *qp_attr_mask); 257 258/** 259 * rdma_connect - Initiate an active connection request. 260 * @id: Connection identifier to connect. 261 * @conn_param: Connection information used for connected QPs. 262 * 263 * Users must have resolved a route for the rdma_cm_id to connect with 264 * by having called rdma_resolve_route before calling this routine. 265 * 266 * This call will either connect to a remote QP or obtain remote QP 267 * information for unconnected rdma_cm_id's. The actual operation is 268 * based on the rdma_cm_id's port space. 269 */ 270int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); 271 272/** 273 * rdma_listen - This function is called by the passive side to 274 * listen for incoming connection requests. 275 * 276 * Users must have bound the rdma_cm_id to a local address by calling 277 * rdma_bind_addr before calling this routine. 278 */ 279int rdma_listen(struct rdma_cm_id *id, int backlog); 280 281/** 282 * rdma_accept - Called to accept a connection request or response. 283 * @id: Connection identifier associated with the request. 284 * @conn_param: Information needed to establish the connection. This must be 285 * provided if accepting a connection request. If accepting a connection 286 * response, this parameter must be NULL. 287 * 288 * Typically, this routine is only called by the listener to accept a connection 289 * request. It must also be called on the active side of a connection if the 290 * user is performing their own QP transitions. 291 * 292 * In the case of error, a reject message is sent to the remote side and the 293 * state of the qp associated with the id is modified to error, such that any 294 * previously posted receive buffers would be flushed. 295 */ 296int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); 297 298/** 299 * rdma_notify - Notifies the RDMA CM of an asynchronous event that has 300 * occurred on the connection. 301 * @id: Connection identifier to transition to established. 302 * @event: Asynchronous event. 303 * 304 * This routine should be invoked by users to notify the CM of relevant 305 * communication events. Events that should be reported to the CM and 306 * when to report them are: 307 * 308 * IB_EVENT_COMM_EST - Used when a message is received on a connected 309 * QP before an RTU has been received. 310 */ 311int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event); 312 313/** 314 * rdma_reject - Called to reject a connection request or response. 315 */ 316int rdma_reject(struct rdma_cm_id *id, const void *private_data, 317 u8 private_data_len); 318 319/** 320 * rdma_disconnect - This function disconnects the associated QP and 321 * transitions it into the error state. 322 */ 323int rdma_disconnect(struct rdma_cm_id *id); 324 325/** 326 * rdma_join_multicast - Join the multicast group specified by the given 327 * address. 328 * @id: Communication identifier associated with the request. 329 * @addr: Multicast address identifying the group to join. 330 * @context: User-defined context associated with the join request, returned 331 * to the user through the private_data pointer in multicast events. 332 */ 333int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr, 334 void *context); 335 336/** 337 * rdma_leave_multicast - Leave the multicast group specified by the given 338 * address. 339 */ 340void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr); 341 342/** 343 * rdma_set_service_type - Set the type of service associated with a 344 * connection identifier. 345 * @id: Communication identifier to associated with service type. 346 * @tos: Type of service. 347 * 348 * The type of service is interpretted as a differentiated service 349 * field (RFC 2474). The service type should be specified before 350 * performing route resolution, as existing communication on the 351 * connection identifier may be unaffected. The type of service 352 * requested may not be supported by the network to all destinations. 353 */ 354void rdma_set_service_type(struct rdma_cm_id *id, int tos); 355 356/** 357 * rdma_set_reuseaddr - Allow the reuse of local addresses when binding 358 * the rdma_cm_id. 359 * @id: Communication identifier to configure. 360 * @reuse: Value indicating if the bound address is reusable. 361 * 362 * Reuse must be set before an address is bound to the id. 363 */ 364int rdma_set_reuseaddr(struct rdma_cm_id *id, int reuse); 365 366/** 367 * rdma_set_afonly - Specify that listens are restricted to the 368 * bound address family only. 369 * @id: Communication identifer to configure. 370 * @afonly: Value indicating if listens are restricted. 371 * 372 * Must be set before identifier is in the listening state. 373 */ 374int rdma_set_afonly(struct rdma_cm_id *id, int afonly); 375 376 /** 377 * rdma_get_service_id - Return the IB service ID for a specified address. 378 * @id: Communication identifier associated with the address. 379 * @addr: Address for the service ID. 380 */ 381__be64 rdma_get_service_id(struct rdma_cm_id *id, struct sockaddr *addr); 382 383#endif /* RDMA_CM_H */ 384