1/* 2 * Driver for Digigram miXart soundcards 3 * 4 * DSP firmware management 5 * 6 * Copyright (c) 2003 by Digigram <alsa@digigram.com> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 21 */ 22 23#include <linux/interrupt.h> 24#include <linux/pci.h> 25#include <linux/firmware.h> 26#include <linux/vmalloc.h> 27#include <linux/slab.h> 28#include <linux/module.h> 29#include <linux/io.h> 30#include <sound/core.h> 31#include "mixart.h" 32#include "mixart_mixer.h" 33#include "mixart_core.h" 34#include "mixart_hwdep.h" 35 36 37/** 38 * wait for a value on a peudo register, exit with a timeout 39 * 40 * @mgr: pointer to miXart manager structure 41 * @offset: unsigned pseudo_register base + offset of value 42 * @is_egal: wait for the equal value 43 * @value: value 44 * @timeout: timeout in centisenconds 45 */ 46static int mixart_wait_nice_for_register_value(struct mixart_mgr *mgr, 47 u32 offset, int is_egal, 48 u32 value, unsigned long timeout) 49{ 50 unsigned long end_time = jiffies + (timeout * HZ / 100); 51 u32 read; 52 53 do { /* we may take too long time in this loop. 54 * so give controls back to kernel if needed. 55 */ 56 cond_resched(); 57 58 read = readl_be( MIXART_MEM( mgr, offset )); 59 if(is_egal) { 60 if(read == value) return 0; 61 } 62 else { /* wait for different value */ 63 if(read != value) return 0; 64 } 65 } while ( time_after_eq(end_time, jiffies) ); 66 67 return -EBUSY; 68} 69 70 71/* 72 structures needed to upload elf code packets 73 */ 74struct snd_mixart_elf32_ehdr { 75 u8 e_ident[16]; 76 u16 e_type; 77 u16 e_machine; 78 u32 e_version; 79 u32 e_entry; 80 u32 e_phoff; 81 u32 e_shoff; 82 u32 e_flags; 83 u16 e_ehsize; 84 u16 e_phentsize; 85 u16 e_phnum; 86 u16 e_shentsize; 87 u16 e_shnum; 88 u16 e_shstrndx; 89}; 90 91struct snd_mixart_elf32_phdr { 92 u32 p_type; 93 u32 p_offset; 94 u32 p_vaddr; 95 u32 p_paddr; 96 u32 p_filesz; 97 u32 p_memsz; 98 u32 p_flags; 99 u32 p_align; 100}; 101 102static int mixart_load_elf(struct mixart_mgr *mgr, const struct firmware *dsp ) 103{ 104 char elf32_magic_number[4] = {0x7f,'E','L','F'}; 105 struct snd_mixart_elf32_ehdr *elf_header; 106 int i; 107 108 elf_header = (struct snd_mixart_elf32_ehdr *)dsp->data; 109 for( i=0; i<4; i++ ) 110 if ( elf32_magic_number[i] != elf_header->e_ident[i] ) 111 return -EINVAL; 112 113 if( elf_header->e_phoff != 0 ) { 114 struct snd_mixart_elf32_phdr elf_programheader; 115 116 for( i=0; i < be16_to_cpu(elf_header->e_phnum); i++ ) { 117 u32 pos = be32_to_cpu(elf_header->e_phoff) + (u32)(i * be16_to_cpu(elf_header->e_phentsize)); 118 119 memcpy( &elf_programheader, dsp->data + pos, sizeof(elf_programheader) ); 120 121 if(elf_programheader.p_type != 0) { 122 if( elf_programheader.p_filesz != 0 ) { 123 memcpy_toio( MIXART_MEM( mgr, be32_to_cpu(elf_programheader.p_vaddr)), 124 dsp->data + be32_to_cpu( elf_programheader.p_offset ), 125 be32_to_cpu( elf_programheader.p_filesz )); 126 } 127 } 128 } 129 } 130 return 0; 131} 132 133/* 134 * get basic information and init miXart 135 */ 136 137/* audio IDs for request to the board */ 138#define MIXART_FIRST_ANA_AUDIO_ID 0 139#define MIXART_FIRST_DIG_AUDIO_ID 8 140 141static int mixart_enum_connectors(struct mixart_mgr *mgr) 142{ 143 u32 k; 144 int err; 145 struct mixart_msg request; 146 struct mixart_enum_connector_resp *connector; 147 struct mixart_audio_info_req *audio_info_req; 148 struct mixart_audio_info_resp *audio_info; 149 150 connector = kmalloc(sizeof(*connector), GFP_KERNEL); 151 audio_info_req = kmalloc(sizeof(*audio_info_req), GFP_KERNEL); 152 audio_info = kmalloc(sizeof(*audio_info), GFP_KERNEL); 153 if (! connector || ! audio_info_req || ! audio_info) { 154 err = -ENOMEM; 155 goto __error; 156 } 157 158 audio_info_req->line_max_level = MIXART_FLOAT_P_22_0_TO_HEX; 159 audio_info_req->micro_max_level = MIXART_FLOAT_M_20_0_TO_HEX; 160 audio_info_req->cd_max_level = MIXART_FLOAT____0_0_TO_HEX; 161 162 request.message_id = MSG_SYSTEM_ENUM_PLAY_CONNECTOR; 163 request.uid = (struct mixart_uid){0,0}; /* board num = 0 */ 164 request.data = NULL; 165 request.size = 0; 166 167 err = snd_mixart_send_msg(mgr, &request, sizeof(*connector), connector); 168 if((err < 0) || (connector->error_code) || (connector->uid_count > MIXART_MAX_PHYS_CONNECTORS)) { 169 dev_err(&mgr->pci->dev, 170 "error MSG_SYSTEM_ENUM_PLAY_CONNECTOR\n"); 171 err = -EINVAL; 172 goto __error; 173 } 174 175 for(k=0; k < connector->uid_count; k++) { 176 struct mixart_pipe *pipe; 177 178 if(k < MIXART_FIRST_DIG_AUDIO_ID) { 179 pipe = &mgr->chip[k/2]->pipe_out_ana; 180 } else { 181 pipe = &mgr->chip[(k-MIXART_FIRST_DIG_AUDIO_ID)/2]->pipe_out_dig; 182 } 183 if(k & 1) { 184 pipe->uid_right_connector = connector->uid[k]; /* odd */ 185 } else { 186 pipe->uid_left_connector = connector->uid[k]; /* even */ 187 } 188 189 /* dev_dbg(&mgr->pci->dev, "playback connector[%d].object_id = %x\n", k, connector->uid[k].object_id); */ 190 191 /* TODO: really need send_msg MSG_CONNECTOR_GET_AUDIO_INFO for each connector ? perhaps for analog level caps ? */ 192 request.message_id = MSG_CONNECTOR_GET_AUDIO_INFO; 193 request.uid = connector->uid[k]; 194 request.data = audio_info_req; 195 request.size = sizeof(*audio_info_req); 196 197 err = snd_mixart_send_msg(mgr, &request, sizeof(*audio_info), audio_info); 198 if( err < 0 ) { 199 dev_err(&mgr->pci->dev, 200 "error MSG_CONNECTOR_GET_AUDIO_INFO\n"); 201 goto __error; 202 } 203 /*dev_dbg(&mgr->pci->dev, "play analog_info.analog_level_present = %x\n", audio_info->info.analog_info.analog_level_present);*/ 204 } 205 206 request.message_id = MSG_SYSTEM_ENUM_RECORD_CONNECTOR; 207 request.uid = (struct mixart_uid){0,0}; /* board num = 0 */ 208 request.data = NULL; 209 request.size = 0; 210 211 err = snd_mixart_send_msg(mgr, &request, sizeof(*connector), connector); 212 if((err < 0) || (connector->error_code) || (connector->uid_count > MIXART_MAX_PHYS_CONNECTORS)) { 213 dev_err(&mgr->pci->dev, 214 "error MSG_SYSTEM_ENUM_RECORD_CONNECTOR\n"); 215 err = -EINVAL; 216 goto __error; 217 } 218 219 for(k=0; k < connector->uid_count; k++) { 220 struct mixart_pipe *pipe; 221 222 if(k < MIXART_FIRST_DIG_AUDIO_ID) { 223 pipe = &mgr->chip[k/2]->pipe_in_ana; 224 } else { 225 pipe = &mgr->chip[(k-MIXART_FIRST_DIG_AUDIO_ID)/2]->pipe_in_dig; 226 } 227 if(k & 1) { 228 pipe->uid_right_connector = connector->uid[k]; /* odd */ 229 } else { 230 pipe->uid_left_connector = connector->uid[k]; /* even */ 231 } 232 233 /* dev_dbg(&mgr->pci->dev, "capture connector[%d].object_id = %x\n", k, connector->uid[k].object_id); */ 234 235 /* TODO: really need send_msg MSG_CONNECTOR_GET_AUDIO_INFO for each connector ? perhaps for analog level caps ? */ 236 request.message_id = MSG_CONNECTOR_GET_AUDIO_INFO; 237 request.uid = connector->uid[k]; 238 request.data = audio_info_req; 239 request.size = sizeof(*audio_info_req); 240 241 err = snd_mixart_send_msg(mgr, &request, sizeof(*audio_info), audio_info); 242 if( err < 0 ) { 243 dev_err(&mgr->pci->dev, 244 "error MSG_CONNECTOR_GET_AUDIO_INFO\n"); 245 goto __error; 246 } 247 /*dev_dbg(&mgr->pci->dev, "rec analog_info.analog_level_present = %x\n", audio_info->info.analog_info.analog_level_present);*/ 248 } 249 err = 0; 250 251 __error: 252 kfree(connector); 253 kfree(audio_info_req); 254 kfree(audio_info); 255 256 return err; 257} 258 259static int mixart_enum_physio(struct mixart_mgr *mgr) 260{ 261 u32 k; 262 int err; 263 struct mixart_msg request; 264 struct mixart_uid get_console_mgr; 265 struct mixart_return_uid console_mgr; 266 struct mixart_uid_enumeration phys_io; 267 268 /* get the uid for the console manager */ 269 get_console_mgr.object_id = 0; 270 get_console_mgr.desc = MSG_CONSOLE_MANAGER | 0; /* cardindex = 0 */ 271 272 request.message_id = MSG_CONSOLE_GET_CLOCK_UID; 273 request.uid = get_console_mgr; 274 request.data = &get_console_mgr; 275 request.size = sizeof(get_console_mgr); 276 277 err = snd_mixart_send_msg(mgr, &request, sizeof(console_mgr), &console_mgr); 278 279 if( (err < 0) || (console_mgr.error_code != 0) ) { 280 dev_dbg(&mgr->pci->dev, 281 "error MSG_CONSOLE_GET_CLOCK_UID : err=%x\n", 282 console_mgr.error_code); 283 return -EINVAL; 284 } 285 286 /* used later for clock issues ! */ 287 mgr->uid_console_manager = console_mgr.uid; 288 289 request.message_id = MSG_SYSTEM_ENUM_PHYSICAL_IO; 290 request.uid = (struct mixart_uid){0,0}; 291 request.data = &console_mgr.uid; 292 request.size = sizeof(console_mgr.uid); 293 294 err = snd_mixart_send_msg(mgr, &request, sizeof(phys_io), &phys_io); 295 if( (err < 0) || ( phys_io.error_code != 0 ) ) { 296 dev_err(&mgr->pci->dev, 297 "error MSG_SYSTEM_ENUM_PHYSICAL_IO err(%x) error_code(%x)\n", 298 err, phys_io.error_code); 299 return -EINVAL; 300 } 301 302 /* min 2 phys io per card (analog in + analog out) */ 303 if (phys_io.nb_uid < MIXART_MAX_CARDS * 2) 304 return -EINVAL; 305 306 for(k=0; k<mgr->num_cards; k++) { 307 mgr->chip[k]->uid_in_analog_physio = phys_io.uid[k]; 308 mgr->chip[k]->uid_out_analog_physio = phys_io.uid[phys_io.nb_uid/2 + k]; 309 } 310 311 return 0; 312} 313 314 315static int mixart_first_init(struct mixart_mgr *mgr) 316{ 317 u32 k; 318 int err; 319 struct mixart_msg request; 320 321 if((err = mixart_enum_connectors(mgr)) < 0) return err; 322 323 if((err = mixart_enum_physio(mgr)) < 0) return err; 324 325 /* send a synchro command to card (necessary to do this before first MSG_STREAM_START_STREAM_GRP_PACKET) */ 326 /* though why not here */ 327 request.message_id = MSG_SYSTEM_SEND_SYNCHRO_CMD; 328 request.uid = (struct mixart_uid){0,0}; 329 request.data = NULL; 330 request.size = 0; 331 /* this command has no data. response is a 32 bit status */ 332 err = snd_mixart_send_msg(mgr, &request, sizeof(k), &k); 333 if( (err < 0) || (k != 0) ) { 334 dev_err(&mgr->pci->dev, "error MSG_SYSTEM_SEND_SYNCHRO_CMD\n"); 335 return err == 0 ? -EINVAL : err; 336 } 337 338 return 0; 339} 340 341 342/* firmware base addresses (when hard coded) */ 343#define MIXART_MOTHERBOARD_XLX_BASE_ADDRESS 0x00600000 344 345static int mixart_dsp_load(struct mixart_mgr* mgr, int index, const struct firmware *dsp) 346{ 347 int err, card_index; 348 u32 status_xilinx, status_elf, status_daught; 349 u32 val; 350 351 /* read motherboard xilinx status */ 352 status_xilinx = readl_be( MIXART_MEM( mgr,MIXART_PSEUDOREG_MXLX_STATUS_OFFSET )); 353 /* read elf status */ 354 status_elf = readl_be( MIXART_MEM( mgr,MIXART_PSEUDOREG_ELF_STATUS_OFFSET )); 355 /* read daughterboard xilinx status */ 356 status_daught = readl_be( MIXART_MEM( mgr,MIXART_PSEUDOREG_DXLX_STATUS_OFFSET )); 357 358 /* motherboard xilinx status 5 will say that the board is performing a reset */ 359 if (status_xilinx == 5) { 360 dev_err(&mgr->pci->dev, "miXart is resetting !\n"); 361 return -EAGAIN; /* try again later */ 362 } 363 364 switch (index) { 365 case MIXART_MOTHERBOARD_XLX_INDEX: 366 367 /* xilinx already loaded ? */ 368 if (status_xilinx == 4) { 369 dev_dbg(&mgr->pci->dev, "xilinx is already loaded !\n"); 370 return 0; 371 } 372 /* the status should be 0 == "idle" */ 373 if (status_xilinx != 0) { 374 dev_err(&mgr->pci->dev, 375 "xilinx load error ! status = %d\n", 376 status_xilinx); 377 return -EIO; /* modprob -r may help ? */ 378 } 379 380 /* check xilinx validity */ 381 if (((u32*)(dsp->data))[0] == 0xffffffff) 382 return -EINVAL; 383 if (dsp->size % 4) 384 return -EINVAL; 385 386 /* set xilinx status to copying */ 387 writel_be( 1, MIXART_MEM( mgr, MIXART_PSEUDOREG_MXLX_STATUS_OFFSET )); 388 389 /* setup xilinx base address */ 390 writel_be( MIXART_MOTHERBOARD_XLX_BASE_ADDRESS, MIXART_MEM( mgr,MIXART_PSEUDOREG_MXLX_BASE_ADDR_OFFSET )); 391 /* setup code size for xilinx file */ 392 writel_be( dsp->size, MIXART_MEM( mgr, MIXART_PSEUDOREG_MXLX_SIZE_OFFSET )); 393 394 /* copy xilinx code */ 395 memcpy_toio( MIXART_MEM( mgr, MIXART_MOTHERBOARD_XLX_BASE_ADDRESS), dsp->data, dsp->size); 396 397 /* set xilinx status to copy finished */ 398 writel_be( 2, MIXART_MEM( mgr, MIXART_PSEUDOREG_MXLX_STATUS_OFFSET )); 399 400 /* return, because no further processing needed */ 401 return 0; 402 403 case MIXART_MOTHERBOARD_ELF_INDEX: 404 405 if (status_elf == 4) { 406 dev_dbg(&mgr->pci->dev, "elf file already loaded !\n"); 407 return 0; 408 } 409 410 /* the status should be 0 == "idle" */ 411 if (status_elf != 0) { 412 dev_err(&mgr->pci->dev, 413 "elf load error ! status = %d\n", 414 status_elf); 415 return -EIO; /* modprob -r may help ? */ 416 } 417 418 /* wait for xilinx status == 4 */ 419 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_MXLX_STATUS_OFFSET, 1, 4, 500); /* 5sec */ 420 if (err < 0) { 421 dev_err(&mgr->pci->dev, "xilinx was not loaded or " 422 "could not be started\n"); 423 return err; 424 } 425 426 /* init some data on the card */ 427 writel_be( 0, MIXART_MEM( mgr, MIXART_PSEUDOREG_BOARDNUMBER ) ); /* set miXart boardnumber to 0 */ 428 writel_be( 0, MIXART_MEM( mgr, MIXART_FLOWTABLE_PTR ) ); /* reset pointer to flow table on miXart */ 429 430 /* set elf status to copying */ 431 writel_be( 1, MIXART_MEM( mgr, MIXART_PSEUDOREG_ELF_STATUS_OFFSET )); 432 433 /* process the copying of the elf packets */ 434 err = mixart_load_elf( mgr, dsp ); 435 if (err < 0) return err; 436 437 /* set elf status to copy finished */ 438 writel_be( 2, MIXART_MEM( mgr, MIXART_PSEUDOREG_ELF_STATUS_OFFSET )); 439 440 /* wait for elf status == 4 */ 441 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_ELF_STATUS_OFFSET, 1, 4, 300); /* 3sec */ 442 if (err < 0) { 443 dev_err(&mgr->pci->dev, "elf could not be started\n"); 444 return err; 445 } 446 447 /* miXart waits at this point on the pointer to the flow table */ 448 writel_be( (u32)mgr->flowinfo.addr, MIXART_MEM( mgr, MIXART_FLOWTABLE_PTR ) ); /* give pointer of flow table to miXart */ 449 450 return 0; /* return, another xilinx file has to be loaded before */ 451 452 case MIXART_AESEBUBOARD_XLX_INDEX: 453 default: 454 455 /* elf and xilinx should be loaded */ 456 if (status_elf != 4 || status_xilinx != 4) { 457 dev_err(&mgr->pci->dev, "xilinx or elf not " 458 "successfully loaded\n"); 459 return -EIO; /* modprob -r may help ? */ 460 } 461 462 /* wait for daughter detection != 0 */ 463 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DBRD_PRESENCE_OFFSET, 0, 0, 30); /* 300msec */ 464 if (err < 0) { 465 dev_err(&mgr->pci->dev, "error starting elf file\n"); 466 return err; 467 } 468 469 /* the board type can now be retrieved */ 470 mgr->board_type = (DAUGHTER_TYPE_MASK & readl_be( MIXART_MEM( mgr, MIXART_PSEUDOREG_DBRD_TYPE_OFFSET))); 471 472 if (mgr->board_type == MIXART_DAUGHTER_TYPE_NONE) 473 break; /* no daughter board; the file does not have to be loaded, continue after the switch */ 474 475 /* only if aesebu daughter board presence (elf code must run) */ 476 if (mgr->board_type != MIXART_DAUGHTER_TYPE_AES ) 477 return -EINVAL; 478 479 /* daughter should be idle */ 480 if (status_daught != 0) { 481 dev_err(&mgr->pci->dev, 482 "daughter load error ! status = %d\n", 483 status_daught); 484 return -EIO; /* modprob -r may help ? */ 485 } 486 487 /* check daughterboard xilinx validity */ 488 if (((u32*)(dsp->data))[0] == 0xffffffff) 489 return -EINVAL; 490 if (dsp->size % 4) 491 return -EINVAL; 492 493 /* inform mixart about the size of the file */ 494 writel_be( dsp->size, MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_SIZE_OFFSET )); 495 496 /* set daughterboard status to 1 */ 497 writel_be( 1, MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET )); 498 499 /* wait for status == 2 */ 500 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET, 1, 2, 30); /* 300msec */ 501 if (err < 0) { 502 dev_err(&mgr->pci->dev, "daughter board load error\n"); 503 return err; 504 } 505 506 /* get the address where to write the file */ 507 val = readl_be( MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_BASE_ADDR_OFFSET )); 508 if (!val) 509 return -EINVAL; 510 511 /* copy daughterboard xilinx code */ 512 memcpy_toio( MIXART_MEM( mgr, val), dsp->data, dsp->size); 513 514 /* set daughterboard status to 4 */ 515 writel_be( 4, MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET )); 516 517 /* continue with init */ 518 break; 519 } /* end of switch file index*/ 520 521 /* wait for daughter status == 3 */ 522 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET, 1, 3, 300); /* 3sec */ 523 if (err < 0) { 524 dev_err(&mgr->pci->dev, 525 "daughter board could not be initialised\n"); 526 return err; 527 } 528 529 /* init mailbox (communication with embedded) */ 530 snd_mixart_init_mailbox(mgr); 531 532 /* first communication with embedded */ 533 err = mixart_first_init(mgr); 534 if (err < 0) { 535 dev_err(&mgr->pci->dev, "miXart could not be set up\n"); 536 return err; 537 } 538 539 /* create devices and mixer in accordance with HW options*/ 540 for (card_index = 0; card_index < mgr->num_cards; card_index++) { 541 struct snd_mixart *chip = mgr->chip[card_index]; 542 543 if ((err = snd_mixart_create_pcm(chip)) < 0) 544 return err; 545 546 if (card_index == 0) { 547 if ((err = snd_mixart_create_mixer(chip->mgr)) < 0) 548 return err; 549 } 550 551 if ((err = snd_card_register(chip->card)) < 0) 552 return err; 553 } 554 555 dev_dbg(&mgr->pci->dev, 556 "miXart firmware downloaded and successfully set up\n"); 557 558 return 0; 559} 560 561 562int snd_mixart_setup_firmware(struct mixart_mgr *mgr) 563{ 564 static char *fw_files[3] = { 565 "miXart8.xlx", "miXart8.elf", "miXart8AES.xlx" 566 }; 567 char path[32]; 568 569 const struct firmware *fw_entry; 570 int i, err; 571 572 for (i = 0; i < 3; i++) { 573 sprintf(path, "mixart/%s", fw_files[i]); 574 if (request_firmware(&fw_entry, path, &mgr->pci->dev)) { 575 dev_err(&mgr->pci->dev, 576 "miXart: can't load firmware %s\n", path); 577 return -ENOENT; 578 } 579 /* fake hwdep dsp record */ 580 err = mixart_dsp_load(mgr, i, fw_entry); 581 release_firmware(fw_entry); 582 if (err < 0) 583 return err; 584 mgr->dsp_loaded |= 1 << i; 585 } 586 return 0; 587} 588 589MODULE_FIRMWARE("mixart/miXart8.xlx"); 590MODULE_FIRMWARE("mixart/miXart8.elf"); 591MODULE_FIRMWARE("mixart/miXart8AES.xlx"); 592