1/* 2 * TAS5086 ASoC codec driver 3 * 4 * Copyright (c) 2013 Daniel Mack <zonque@gmail.com> 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License 8 * as published by the Free Software Foundation; either version 2 9 * of the License, or (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * TODO: 17 * - implement DAPM and input muxing 18 * - implement modulation limit 19 * - implement non-default PWM start 20 * 21 * Note that this chip has a very unusual register layout, specifically 22 * because the registers are of unequal size, and multi-byte registers 23 * require bulk writes to take effect. Regmap does not support that kind 24 * of devices. 25 * 26 * Currently, the driver does not touch any of the registers >= 0x20, so 27 * it doesn't matter because the entire map can be accessed as 8-bit 28 * array. In case more features will be added in the future 29 * that require access to higher registers, the entire regmap H/W I/O 30 * routines have to be open-coded. 31 */ 32 33#include <linux/module.h> 34#include <linux/slab.h> 35#include <linux/delay.h> 36#include <linux/gpio.h> 37#include <linux/i2c.h> 38#include <linux/regmap.h> 39#include <linux/regulator/consumer.h> 40#include <linux/spi/spi.h> 41#include <linux/of.h> 42#include <linux/of_device.h> 43#include <linux/of_gpio.h> 44#include <sound/pcm.h> 45#include <sound/pcm_params.h> 46#include <sound/soc.h> 47#include <sound/tlv.h> 48#include <sound/tas5086.h> 49 50#define TAS5086_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ 51 SNDRV_PCM_FMTBIT_S20_3LE | \ 52 SNDRV_PCM_FMTBIT_S24_3LE) 53 54#define TAS5086_PCM_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ 55 SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \ 56 SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \ 57 SNDRV_PCM_RATE_192000) 58 59/* 60 * TAS5086 registers 61 */ 62#define TAS5086_CLOCK_CONTROL 0x00 /* Clock control register */ 63#define TAS5086_CLOCK_RATE(val) (val << 5) 64#define TAS5086_CLOCK_RATE_MASK (0x7 << 5) 65#define TAS5086_CLOCK_RATIO(val) (val << 2) 66#define TAS5086_CLOCK_RATIO_MASK (0x7 << 2) 67#define TAS5086_CLOCK_SCLK_RATIO_48 (1 << 1) 68#define TAS5086_CLOCK_VALID (1 << 0) 69 70#define TAS5086_DEEMPH_MASK 0x03 71#define TAS5086_SOFT_MUTE_ALL 0x3f 72 73#define TAS5086_DEV_ID 0x01 /* Device ID register */ 74#define TAS5086_ERROR_STATUS 0x02 /* Error status register */ 75#define TAS5086_SYS_CONTROL_1 0x03 /* System control register 1 */ 76#define TAS5086_SERIAL_DATA_IF 0x04 /* Serial data interface register */ 77#define TAS5086_SYS_CONTROL_2 0x05 /* System control register 2 */ 78#define TAS5086_SOFT_MUTE 0x06 /* Soft mute register */ 79#define TAS5086_MASTER_VOL 0x07 /* Master volume */ 80#define TAS5086_CHANNEL_VOL(X) (0x08 + (X)) /* Channel 1-6 volume */ 81#define TAS5086_VOLUME_CONTROL 0x09 /* Volume control register */ 82#define TAS5086_MOD_LIMIT 0x10 /* Modulation limit register */ 83#define TAS5086_PWM_START 0x18 /* PWM start register */ 84#define TAS5086_SURROUND 0x19 /* Surround register */ 85#define TAS5086_SPLIT_CAP_CHARGE 0x1a /* Split cap charge period register */ 86#define TAS5086_OSC_TRIM 0x1b /* Oscillator trim register */ 87#define TAS5086_BKNDERR 0x1c 88#define TAS5086_INPUT_MUX 0x20 89#define TAS5086_PWM_OUTPUT_MUX 0x25 90 91#define TAS5086_MAX_REGISTER TAS5086_PWM_OUTPUT_MUX 92 93#define TAS5086_PWM_START_MIDZ_FOR_START_1 (1 << 7) 94#define TAS5086_PWM_START_MIDZ_FOR_START_2 (1 << 6) 95#define TAS5086_PWM_START_CHANNEL_MASK (0x3f) 96 97/* 98 * Default TAS5086 power-up configuration 99 */ 100static const struct reg_default tas5086_reg_defaults[] = { 101 { 0x00, 0x6c }, 102 { 0x01, 0x03 }, 103 { 0x02, 0x00 }, 104 { 0x03, 0xa0 }, 105 { 0x04, 0x05 }, 106 { 0x05, 0x60 }, 107 { 0x06, 0x00 }, 108 { 0x07, 0xff }, 109 { 0x08, 0x30 }, 110 { 0x09, 0x30 }, 111 { 0x0a, 0x30 }, 112 { 0x0b, 0x30 }, 113 { 0x0c, 0x30 }, 114 { 0x0d, 0x30 }, 115 { 0x0e, 0xb1 }, 116 { 0x0f, 0x00 }, 117 { 0x10, 0x02 }, 118 { 0x11, 0x00 }, 119 { 0x12, 0x00 }, 120 { 0x13, 0x00 }, 121 { 0x14, 0x00 }, 122 { 0x15, 0x00 }, 123 { 0x16, 0x00 }, 124 { 0x17, 0x00 }, 125 { 0x18, 0x3f }, 126 { 0x19, 0x00 }, 127 { 0x1a, 0x18 }, 128 { 0x1b, 0x82 }, 129 { 0x1c, 0x05 }, 130}; 131 132static int tas5086_register_size(struct device *dev, unsigned int reg) 133{ 134 switch (reg) { 135 case TAS5086_CLOCK_CONTROL ... TAS5086_BKNDERR: 136 return 1; 137 case TAS5086_INPUT_MUX: 138 case TAS5086_PWM_OUTPUT_MUX: 139 return 4; 140 } 141 142 dev_err(dev, "Unsupported register address: %d\n", reg); 143 return 0; 144} 145 146static bool tas5086_accessible_reg(struct device *dev, unsigned int reg) 147{ 148 switch (reg) { 149 case 0x0f: 150 case 0x11 ... 0x17: 151 case 0x1d ... 0x1f: 152 return false; 153 default: 154 return true; 155 } 156} 157 158static bool tas5086_volatile_reg(struct device *dev, unsigned int reg) 159{ 160 switch (reg) { 161 case TAS5086_DEV_ID: 162 case TAS5086_ERROR_STATUS: 163 return true; 164 } 165 166 return false; 167} 168 169static bool tas5086_writeable_reg(struct device *dev, unsigned int reg) 170{ 171 return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID); 172} 173 174static int tas5086_reg_write(void *context, unsigned int reg, 175 unsigned int value) 176{ 177 struct i2c_client *client = context; 178 unsigned int i, size; 179 uint8_t buf[5]; 180 int ret; 181 182 size = tas5086_register_size(&client->dev, reg); 183 if (size == 0) 184 return -EINVAL; 185 186 buf[0] = reg; 187 188 for (i = size; i >= 1; --i) { 189 buf[i] = value; 190 value >>= 8; 191 } 192 193 ret = i2c_master_send(client, buf, size + 1); 194 if (ret == size + 1) 195 return 0; 196 else if (ret < 0) 197 return ret; 198 else 199 return -EIO; 200} 201 202static int tas5086_reg_read(void *context, unsigned int reg, 203 unsigned int *value) 204{ 205 struct i2c_client *client = context; 206 uint8_t send_buf, recv_buf[4]; 207 struct i2c_msg msgs[2]; 208 unsigned int size; 209 unsigned int i; 210 int ret; 211 212 size = tas5086_register_size(&client->dev, reg); 213 if (size == 0) 214 return -EINVAL; 215 216 send_buf = reg; 217 218 msgs[0].addr = client->addr; 219 msgs[0].len = sizeof(send_buf); 220 msgs[0].buf = &send_buf; 221 msgs[0].flags = 0; 222 223 msgs[1].addr = client->addr; 224 msgs[1].len = size; 225 msgs[1].buf = recv_buf; 226 msgs[1].flags = I2C_M_RD; 227 228 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 229 if (ret < 0) 230 return ret; 231 else if (ret != ARRAY_SIZE(msgs)) 232 return -EIO; 233 234 *value = 0; 235 236 for (i = 0; i < size; i++) { 237 *value <<= 8; 238 *value |= recv_buf[i]; 239 } 240 241 return 0; 242} 243 244static const char * const supply_names[] = { 245 "dvdd", "avdd" 246}; 247 248struct tas5086_private { 249 struct regmap *regmap; 250 unsigned int mclk, sclk; 251 unsigned int format; 252 bool deemph; 253 unsigned int charge_period; 254 unsigned int pwm_start_mid_z; 255 /* Current sample rate for de-emphasis control */ 256 int rate; 257 /* GPIO driving Reset pin, if any */ 258 int gpio_nreset; 259 struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; 260}; 261 262static int tas5086_deemph[] = { 0, 32000, 44100, 48000 }; 263 264static int tas5086_set_deemph(struct snd_soc_codec *codec) 265{ 266 struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); 267 int i, val = 0; 268 269 if (priv->deemph) 270 for (i = 0; i < ARRAY_SIZE(tas5086_deemph); i++) 271 if (tas5086_deemph[i] == priv->rate) 272 val = i; 273 274 return regmap_update_bits(priv->regmap, TAS5086_SYS_CONTROL_1, 275 TAS5086_DEEMPH_MASK, val); 276} 277 278static int tas5086_get_deemph(struct snd_kcontrol *kcontrol, 279 struct snd_ctl_elem_value *ucontrol) 280{ 281 struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); 282 struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); 283 284 ucontrol->value.integer.value[0] = priv->deemph; 285 286 return 0; 287} 288 289static int tas5086_put_deemph(struct snd_kcontrol *kcontrol, 290 struct snd_ctl_elem_value *ucontrol) 291{ 292 struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); 293 struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); 294 295 priv->deemph = ucontrol->value.integer.value[0]; 296 297 return tas5086_set_deemph(codec); 298} 299 300 301static int tas5086_set_dai_sysclk(struct snd_soc_dai *codec_dai, 302 int clk_id, unsigned int freq, int dir) 303{ 304 struct snd_soc_codec *codec = codec_dai->codec; 305 struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); 306 307 switch (clk_id) { 308 case TAS5086_CLK_IDX_MCLK: 309 priv->mclk = freq; 310 break; 311 case TAS5086_CLK_IDX_SCLK: 312 priv->sclk = freq; 313 break; 314 } 315 316 return 0; 317} 318 319static int tas5086_set_dai_fmt(struct snd_soc_dai *codec_dai, 320 unsigned int format) 321{ 322 struct snd_soc_codec *codec = codec_dai->codec; 323 struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); 324 325 /* The TAS5086 can only be slave to all clocks */ 326 if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) { 327 dev_err(codec->dev, "Invalid clocking mode\n"); 328 return -EINVAL; 329 } 330 331 /* we need to refer to the data format from hw_params() */ 332 priv->format = format; 333 334 return 0; 335} 336 337static const int tas5086_sample_rates[] = { 338 32000, 38000, 44100, 48000, 88200, 96000, 176400, 192000 339}; 340 341static const int tas5086_ratios[] = { 342 64, 128, 192, 256, 384, 512 343}; 344 345static int index_in_array(const int *array, int len, int needle) 346{ 347 int i; 348 349 for (i = 0; i < len; i++) 350 if (array[i] == needle) 351 return i; 352 353 return -ENOENT; 354} 355 356static int tas5086_hw_params(struct snd_pcm_substream *substream, 357 struct snd_pcm_hw_params *params, 358 struct snd_soc_dai *dai) 359{ 360 struct snd_soc_codec *codec = dai->codec; 361 struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); 362 int val; 363 int ret; 364 365 priv->rate = params_rate(params); 366 367 /* Look up the sample rate and refer to the offset in the list */ 368 val = index_in_array(tas5086_sample_rates, 369 ARRAY_SIZE(tas5086_sample_rates), priv->rate); 370 371 if (val < 0) { 372 dev_err(codec->dev, "Invalid sample rate\n"); 373 return -EINVAL; 374 } 375 376 ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, 377 TAS5086_CLOCK_RATE_MASK, 378 TAS5086_CLOCK_RATE(val)); 379 if (ret < 0) 380 return ret; 381 382 /* MCLK / Fs ratio */ 383 val = index_in_array(tas5086_ratios, ARRAY_SIZE(tas5086_ratios), 384 priv->mclk / priv->rate); 385 if (val < 0) { 386 dev_err(codec->dev, "Inavlid MCLK / Fs ratio\n"); 387 return -EINVAL; 388 } 389 390 ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, 391 TAS5086_CLOCK_RATIO_MASK, 392 TAS5086_CLOCK_RATIO(val)); 393 if (ret < 0) 394 return ret; 395 396 397 ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, 398 TAS5086_CLOCK_SCLK_RATIO_48, 399 (priv->sclk == 48 * priv->rate) ? 400 TAS5086_CLOCK_SCLK_RATIO_48 : 0); 401 if (ret < 0) 402 return ret; 403 404 /* 405 * The chip has a very unituitive register mapping and muxes information 406 * about data format and sample depth into the same register, but not on 407 * a logical bit-boundary. Hence, we have to refer to the format passed 408 * in the set_dai_fmt() callback and set up everything from here. 409 * 410 * First, determine the 'base' value, using the format ... 411 */ 412 switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) { 413 case SND_SOC_DAIFMT_RIGHT_J: 414 val = 0x00; 415 break; 416 case SND_SOC_DAIFMT_I2S: 417 val = 0x03; 418 break; 419 case SND_SOC_DAIFMT_LEFT_J: 420 val = 0x06; 421 break; 422 default: 423 dev_err(codec->dev, "Invalid DAI format\n"); 424 return -EINVAL; 425 } 426 427 /* ... then add the offset for the sample bit depth. */ 428 switch (params_width(params)) { 429 case 16: 430 val += 0; 431 break; 432 case 20: 433 val += 1; 434 break; 435 case 24: 436 val += 2; 437 break; 438 default: 439 dev_err(codec->dev, "Invalid bit width\n"); 440 return -EINVAL; 441 } 442 443 ret = regmap_write(priv->regmap, TAS5086_SERIAL_DATA_IF, val); 444 if (ret < 0) 445 return ret; 446 447 /* clock is considered valid now */ 448 ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, 449 TAS5086_CLOCK_VALID, TAS5086_CLOCK_VALID); 450 if (ret < 0) 451 return ret; 452 453 return tas5086_set_deemph(codec); 454} 455 456static int tas5086_mute_stream(struct snd_soc_dai *dai, int mute, int stream) 457{ 458 struct snd_soc_codec *codec = dai->codec; 459 struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); 460 unsigned int val = 0; 461 462 if (mute) 463 val = TAS5086_SOFT_MUTE_ALL; 464 465 return regmap_write(priv->regmap, TAS5086_SOFT_MUTE, val); 466} 467 468static void tas5086_reset(struct tas5086_private *priv) 469{ 470 if (gpio_is_valid(priv->gpio_nreset)) { 471 /* Reset codec - minimum assertion time is 400ns */ 472 gpio_direction_output(priv->gpio_nreset, 0); 473 udelay(1); 474 gpio_set_value(priv->gpio_nreset, 1); 475 476 /* Codec needs ~15ms to wake up */ 477 msleep(15); 478 } 479} 480 481/* charge period values in microseconds */ 482static const int tas5086_charge_period[] = { 483 13000, 16900, 23400, 31200, 41600, 54600, 72800, 96200, 484 130000, 156000, 234000, 312000, 416000, 546000, 728000, 962000, 485 1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000, 486}; 487 488static int tas5086_init(struct device *dev, struct tas5086_private *priv) 489{ 490 int ret, i; 491 492 /* 493 * If any of the channels is configured to start in Mid-Z mode, 494 * configure 'part 1' of the PWM starts to use Mid-Z, and tell 495 * all configured mid-z channels to start start under 'part 1'. 496 */ 497 if (priv->pwm_start_mid_z) 498 regmap_write(priv->regmap, TAS5086_PWM_START, 499 TAS5086_PWM_START_MIDZ_FOR_START_1 | 500 priv->pwm_start_mid_z); 501 502 /* lookup and set split-capacitor charge period */ 503 if (priv->charge_period == 0) { 504 regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0); 505 } else { 506 i = index_in_array(tas5086_charge_period, 507 ARRAY_SIZE(tas5086_charge_period), 508 priv->charge_period); 509 if (i >= 0) 510 regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 511 i + 0x08); 512 else 513 dev_warn(dev, 514 "Invalid split-cap charge period of %d ns.\n", 515 priv->charge_period); 516 } 517 518 /* enable factory trim */ 519 ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00); 520 if (ret < 0) 521 return ret; 522 523 /* start all channels */ 524 ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20); 525 if (ret < 0) 526 return ret; 527 528 /* mute all channels for now */ 529 ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE, 530 TAS5086_SOFT_MUTE_ALL); 531 if (ret < 0) 532 return ret; 533 534 return 0; 535} 536 537/* TAS5086 controls */ 538static const DECLARE_TLV_DB_SCALE(tas5086_dac_tlv, -10350, 50, 1); 539 540static const struct snd_kcontrol_new tas5086_controls[] = { 541 SOC_SINGLE_TLV("Master Playback Volume", TAS5086_MASTER_VOL, 542 0, 0xff, 1, tas5086_dac_tlv), 543 SOC_DOUBLE_R_TLV("Channel 1/2 Playback Volume", 544 TAS5086_CHANNEL_VOL(0), TAS5086_CHANNEL_VOL(1), 545 0, 0xff, 1, tas5086_dac_tlv), 546 SOC_DOUBLE_R_TLV("Channel 3/4 Playback Volume", 547 TAS5086_CHANNEL_VOL(2), TAS5086_CHANNEL_VOL(3), 548 0, 0xff, 1, tas5086_dac_tlv), 549 SOC_DOUBLE_R_TLV("Channel 5/6 Playback Volume", 550 TAS5086_CHANNEL_VOL(4), TAS5086_CHANNEL_VOL(5), 551 0, 0xff, 1, tas5086_dac_tlv), 552 SOC_SINGLE_BOOL_EXT("De-emphasis Switch", 0, 553 tas5086_get_deemph, tas5086_put_deemph), 554}; 555 556/* Input mux controls */ 557static const char *tas5086_dapm_sdin_texts[] = 558{ 559 "SDIN1-L", "SDIN1-R", "SDIN2-L", "SDIN2-R", 560 "SDIN3-L", "SDIN3-R", "Ground (0)", "nc" 561}; 562 563static const struct soc_enum tas5086_dapm_input_mux_enum[] = { 564 SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 20, 8, tas5086_dapm_sdin_texts), 565 SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 16, 8, tas5086_dapm_sdin_texts), 566 SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 12, 8, tas5086_dapm_sdin_texts), 567 SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 8, 8, tas5086_dapm_sdin_texts), 568 SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 4, 8, tas5086_dapm_sdin_texts), 569 SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 0, 8, tas5086_dapm_sdin_texts), 570}; 571 572static const struct snd_kcontrol_new tas5086_dapm_input_mux_controls[] = { 573 SOC_DAPM_ENUM("Channel 1 input", tas5086_dapm_input_mux_enum[0]), 574 SOC_DAPM_ENUM("Channel 2 input", tas5086_dapm_input_mux_enum[1]), 575 SOC_DAPM_ENUM("Channel 3 input", tas5086_dapm_input_mux_enum[2]), 576 SOC_DAPM_ENUM("Channel 4 input", tas5086_dapm_input_mux_enum[3]), 577 SOC_DAPM_ENUM("Channel 5 input", tas5086_dapm_input_mux_enum[4]), 578 SOC_DAPM_ENUM("Channel 6 input", tas5086_dapm_input_mux_enum[5]), 579}; 580 581/* Output mux controls */ 582static const char *tas5086_dapm_channel_texts[] = 583 { "Channel 1 Mux", "Channel 2 Mux", "Channel 3 Mux", 584 "Channel 4 Mux", "Channel 5 Mux", "Channel 6 Mux" }; 585 586static const struct soc_enum tas5086_dapm_output_mux_enum[] = { 587 SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 20, 6, tas5086_dapm_channel_texts), 588 SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 16, 6, tas5086_dapm_channel_texts), 589 SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 12, 6, tas5086_dapm_channel_texts), 590 SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 8, 6, tas5086_dapm_channel_texts), 591 SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 4, 6, tas5086_dapm_channel_texts), 592 SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 0, 6, tas5086_dapm_channel_texts), 593}; 594 595static const struct snd_kcontrol_new tas5086_dapm_output_mux_controls[] = { 596 SOC_DAPM_ENUM("PWM1 Output", tas5086_dapm_output_mux_enum[0]), 597 SOC_DAPM_ENUM("PWM2 Output", tas5086_dapm_output_mux_enum[1]), 598 SOC_DAPM_ENUM("PWM3 Output", tas5086_dapm_output_mux_enum[2]), 599 SOC_DAPM_ENUM("PWM4 Output", tas5086_dapm_output_mux_enum[3]), 600 SOC_DAPM_ENUM("PWM5 Output", tas5086_dapm_output_mux_enum[4]), 601 SOC_DAPM_ENUM("PWM6 Output", tas5086_dapm_output_mux_enum[5]), 602}; 603 604static const struct snd_soc_dapm_widget tas5086_dapm_widgets[] = { 605 SND_SOC_DAPM_INPUT("SDIN1-L"), 606 SND_SOC_DAPM_INPUT("SDIN1-R"), 607 SND_SOC_DAPM_INPUT("SDIN2-L"), 608 SND_SOC_DAPM_INPUT("SDIN2-R"), 609 SND_SOC_DAPM_INPUT("SDIN3-L"), 610 SND_SOC_DAPM_INPUT("SDIN3-R"), 611 SND_SOC_DAPM_INPUT("SDIN4-L"), 612 SND_SOC_DAPM_INPUT("SDIN4-R"), 613 614 SND_SOC_DAPM_OUTPUT("PWM1"), 615 SND_SOC_DAPM_OUTPUT("PWM2"), 616 SND_SOC_DAPM_OUTPUT("PWM3"), 617 SND_SOC_DAPM_OUTPUT("PWM4"), 618 SND_SOC_DAPM_OUTPUT("PWM5"), 619 SND_SOC_DAPM_OUTPUT("PWM6"), 620 621 SND_SOC_DAPM_MUX("Channel 1 Mux", SND_SOC_NOPM, 0, 0, 622 &tas5086_dapm_input_mux_controls[0]), 623 SND_SOC_DAPM_MUX("Channel 2 Mux", SND_SOC_NOPM, 0, 0, 624 &tas5086_dapm_input_mux_controls[1]), 625 SND_SOC_DAPM_MUX("Channel 3 Mux", SND_SOC_NOPM, 0, 0, 626 &tas5086_dapm_input_mux_controls[2]), 627 SND_SOC_DAPM_MUX("Channel 4 Mux", SND_SOC_NOPM, 0, 0, 628 &tas5086_dapm_input_mux_controls[3]), 629 SND_SOC_DAPM_MUX("Channel 5 Mux", SND_SOC_NOPM, 0, 0, 630 &tas5086_dapm_input_mux_controls[4]), 631 SND_SOC_DAPM_MUX("Channel 6 Mux", SND_SOC_NOPM, 0, 0, 632 &tas5086_dapm_input_mux_controls[5]), 633 634 SND_SOC_DAPM_MUX("PWM1 Mux", SND_SOC_NOPM, 0, 0, 635 &tas5086_dapm_output_mux_controls[0]), 636 SND_SOC_DAPM_MUX("PWM2 Mux", SND_SOC_NOPM, 0, 0, 637 &tas5086_dapm_output_mux_controls[1]), 638 SND_SOC_DAPM_MUX("PWM3 Mux", SND_SOC_NOPM, 0, 0, 639 &tas5086_dapm_output_mux_controls[2]), 640 SND_SOC_DAPM_MUX("PWM4 Mux", SND_SOC_NOPM, 0, 0, 641 &tas5086_dapm_output_mux_controls[3]), 642 SND_SOC_DAPM_MUX("PWM5 Mux", SND_SOC_NOPM, 0, 0, 643 &tas5086_dapm_output_mux_controls[4]), 644 SND_SOC_DAPM_MUX("PWM6 Mux", SND_SOC_NOPM, 0, 0, 645 &tas5086_dapm_output_mux_controls[5]), 646}; 647 648static const struct snd_soc_dapm_route tas5086_dapm_routes[] = { 649 /* SDIN inputs -> channel muxes */ 650 { "Channel 1 Mux", "SDIN1-L", "SDIN1-L" }, 651 { "Channel 1 Mux", "SDIN1-R", "SDIN1-R" }, 652 { "Channel 1 Mux", "SDIN2-L", "SDIN2-L" }, 653 { "Channel 1 Mux", "SDIN2-R", "SDIN2-R" }, 654 { "Channel 1 Mux", "SDIN3-L", "SDIN3-L" }, 655 { "Channel 1 Mux", "SDIN3-R", "SDIN3-R" }, 656 657 { "Channel 2 Mux", "SDIN1-L", "SDIN1-L" }, 658 { "Channel 2 Mux", "SDIN1-R", "SDIN1-R" }, 659 { "Channel 2 Mux", "SDIN2-L", "SDIN2-L" }, 660 { "Channel 2 Mux", "SDIN2-R", "SDIN2-R" }, 661 { "Channel 2 Mux", "SDIN3-L", "SDIN3-L" }, 662 { "Channel 2 Mux", "SDIN3-R", "SDIN3-R" }, 663 664 { "Channel 2 Mux", "SDIN1-L", "SDIN1-L" }, 665 { "Channel 2 Mux", "SDIN1-R", "SDIN1-R" }, 666 { "Channel 2 Mux", "SDIN2-L", "SDIN2-L" }, 667 { "Channel 2 Mux", "SDIN2-R", "SDIN2-R" }, 668 { "Channel 2 Mux", "SDIN3-L", "SDIN3-L" }, 669 { "Channel 2 Mux", "SDIN3-R", "SDIN3-R" }, 670 671 { "Channel 3 Mux", "SDIN1-L", "SDIN1-L" }, 672 { "Channel 3 Mux", "SDIN1-R", "SDIN1-R" }, 673 { "Channel 3 Mux", "SDIN2-L", "SDIN2-L" }, 674 { "Channel 3 Mux", "SDIN2-R", "SDIN2-R" }, 675 { "Channel 3 Mux", "SDIN3-L", "SDIN3-L" }, 676 { "Channel 3 Mux", "SDIN3-R", "SDIN3-R" }, 677 678 { "Channel 4 Mux", "SDIN1-L", "SDIN1-L" }, 679 { "Channel 4 Mux", "SDIN1-R", "SDIN1-R" }, 680 { "Channel 4 Mux", "SDIN2-L", "SDIN2-L" }, 681 { "Channel 4 Mux", "SDIN2-R", "SDIN2-R" }, 682 { "Channel 4 Mux", "SDIN3-L", "SDIN3-L" }, 683 { "Channel 4 Mux", "SDIN3-R", "SDIN3-R" }, 684 685 { "Channel 5 Mux", "SDIN1-L", "SDIN1-L" }, 686 { "Channel 5 Mux", "SDIN1-R", "SDIN1-R" }, 687 { "Channel 5 Mux", "SDIN2-L", "SDIN2-L" }, 688 { "Channel 5 Mux", "SDIN2-R", "SDIN2-R" }, 689 { "Channel 5 Mux", "SDIN3-L", "SDIN3-L" }, 690 { "Channel 5 Mux", "SDIN3-R", "SDIN3-R" }, 691 692 { "Channel 6 Mux", "SDIN1-L", "SDIN1-L" }, 693 { "Channel 6 Mux", "SDIN1-R", "SDIN1-R" }, 694 { "Channel 6 Mux", "SDIN2-L", "SDIN2-L" }, 695 { "Channel 6 Mux", "SDIN2-R", "SDIN2-R" }, 696 { "Channel 6 Mux", "SDIN3-L", "SDIN3-L" }, 697 { "Channel 6 Mux", "SDIN3-R", "SDIN3-R" }, 698 699 /* Channel muxes -> PWM muxes */ 700 { "PWM1 Mux", "Channel 1 Mux", "Channel 1 Mux" }, 701 { "PWM2 Mux", "Channel 1 Mux", "Channel 1 Mux" }, 702 { "PWM3 Mux", "Channel 1 Mux", "Channel 1 Mux" }, 703 { "PWM4 Mux", "Channel 1 Mux", "Channel 1 Mux" }, 704 { "PWM5 Mux", "Channel 1 Mux", "Channel 1 Mux" }, 705 { "PWM6 Mux", "Channel 1 Mux", "Channel 1 Mux" }, 706 707 { "PWM1 Mux", "Channel 2 Mux", "Channel 2 Mux" }, 708 { "PWM2 Mux", "Channel 2 Mux", "Channel 2 Mux" }, 709 { "PWM3 Mux", "Channel 2 Mux", "Channel 2 Mux" }, 710 { "PWM4 Mux", "Channel 2 Mux", "Channel 2 Mux" }, 711 { "PWM5 Mux", "Channel 2 Mux", "Channel 2 Mux" }, 712 { "PWM6 Mux", "Channel 2 Mux", "Channel 2 Mux" }, 713 714 { "PWM1 Mux", "Channel 3 Mux", "Channel 3 Mux" }, 715 { "PWM2 Mux", "Channel 3 Mux", "Channel 3 Mux" }, 716 { "PWM3 Mux", "Channel 3 Mux", "Channel 3 Mux" }, 717 { "PWM4 Mux", "Channel 3 Mux", "Channel 3 Mux" }, 718 { "PWM5 Mux", "Channel 3 Mux", "Channel 3 Mux" }, 719 { "PWM6 Mux", "Channel 3 Mux", "Channel 3 Mux" }, 720 721 { "PWM1 Mux", "Channel 4 Mux", "Channel 4 Mux" }, 722 { "PWM2 Mux", "Channel 4 Mux", "Channel 4 Mux" }, 723 { "PWM3 Mux", "Channel 4 Mux", "Channel 4 Mux" }, 724 { "PWM4 Mux", "Channel 4 Mux", "Channel 4 Mux" }, 725 { "PWM5 Mux", "Channel 4 Mux", "Channel 4 Mux" }, 726 { "PWM6 Mux", "Channel 4 Mux", "Channel 4 Mux" }, 727 728 { "PWM1 Mux", "Channel 5 Mux", "Channel 5 Mux" }, 729 { "PWM2 Mux", "Channel 5 Mux", "Channel 5 Mux" }, 730 { "PWM3 Mux", "Channel 5 Mux", "Channel 5 Mux" }, 731 { "PWM4 Mux", "Channel 5 Mux", "Channel 5 Mux" }, 732 { "PWM5 Mux", "Channel 5 Mux", "Channel 5 Mux" }, 733 { "PWM6 Mux", "Channel 5 Mux", "Channel 5 Mux" }, 734 735 { "PWM1 Mux", "Channel 6 Mux", "Channel 6 Mux" }, 736 { "PWM2 Mux", "Channel 6 Mux", "Channel 6 Mux" }, 737 { "PWM3 Mux", "Channel 6 Mux", "Channel 6 Mux" }, 738 { "PWM4 Mux", "Channel 6 Mux", "Channel 6 Mux" }, 739 { "PWM5 Mux", "Channel 6 Mux", "Channel 6 Mux" }, 740 { "PWM6 Mux", "Channel 6 Mux", "Channel 6 Mux" }, 741 742 /* The PWM muxes are directly connected to the PWM outputs */ 743 { "PWM1", NULL, "PWM1 Mux" }, 744 { "PWM2", NULL, "PWM2 Mux" }, 745 { "PWM3", NULL, "PWM3 Mux" }, 746 { "PWM4", NULL, "PWM4 Mux" }, 747 { "PWM5", NULL, "PWM5 Mux" }, 748 { "PWM6", NULL, "PWM6 Mux" }, 749 750}; 751 752static const struct snd_soc_dai_ops tas5086_dai_ops = { 753 .hw_params = tas5086_hw_params, 754 .set_sysclk = tas5086_set_dai_sysclk, 755 .set_fmt = tas5086_set_dai_fmt, 756 .mute_stream = tas5086_mute_stream, 757}; 758 759static struct snd_soc_dai_driver tas5086_dai = { 760 .name = "tas5086-hifi", 761 .playback = { 762 .stream_name = "Playback", 763 .channels_min = 2, 764 .channels_max = 6, 765 .rates = TAS5086_PCM_RATES, 766 .formats = TAS5086_PCM_FORMATS, 767 }, 768 .ops = &tas5086_dai_ops, 769}; 770 771#ifdef CONFIG_PM 772static int tas5086_soc_suspend(struct snd_soc_codec *codec) 773{ 774 struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); 775 int ret; 776 777 /* Shut down all channels */ 778 ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x60); 779 if (ret < 0) 780 return ret; 781 782 regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); 783 784 return 0; 785} 786 787static int tas5086_soc_resume(struct snd_soc_codec *codec) 788{ 789 struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); 790 int ret; 791 792 ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies); 793 if (ret < 0) 794 return ret; 795 796 tas5086_reset(priv); 797 regcache_mark_dirty(priv->regmap); 798 799 ret = tas5086_init(codec->dev, priv); 800 if (ret < 0) 801 return ret; 802 803 ret = regcache_sync(priv->regmap); 804 if (ret < 0) 805 return ret; 806 807 return 0; 808} 809#else 810#define tas5086_soc_suspend NULL 811#define tas5086_soc_resume NULL 812#endif /* CONFIG_PM */ 813 814#ifdef CONFIG_OF 815static const struct of_device_id tas5086_dt_ids[] = { 816 { .compatible = "ti,tas5086", }, 817 { } 818}; 819MODULE_DEVICE_TABLE(of, tas5086_dt_ids); 820#endif 821 822static int tas5086_probe(struct snd_soc_codec *codec) 823{ 824 struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); 825 int i, ret; 826 827 ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies); 828 if (ret < 0) { 829 dev_err(codec->dev, "Failed to enable regulators: %d\n", ret); 830 return ret; 831 } 832 833 priv->pwm_start_mid_z = 0; 834 priv->charge_period = 1300000; /* hardware default is 1300 ms */ 835 836 if (of_match_device(of_match_ptr(tas5086_dt_ids), codec->dev)) { 837 struct device_node *of_node = codec->dev->of_node; 838 839 of_property_read_u32(of_node, "ti,charge-period", 840 &priv->charge_period); 841 842 for (i = 0; i < 6; i++) { 843 char name[25]; 844 845 snprintf(name, sizeof(name), 846 "ti,mid-z-channel-%d", i + 1); 847 848 if (of_get_property(of_node, name, NULL) != NULL) 849 priv->pwm_start_mid_z |= 1 << i; 850 } 851 } 852 853 tas5086_reset(priv); 854 ret = tas5086_init(codec->dev, priv); 855 if (ret < 0) 856 goto exit_disable_regulators; 857 858 /* set master volume to 0 dB */ 859 ret = regmap_write(priv->regmap, TAS5086_MASTER_VOL, 0x30); 860 if (ret < 0) 861 goto exit_disable_regulators; 862 863 return 0; 864 865exit_disable_regulators: 866 regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); 867 868 return ret; 869} 870 871static int tas5086_remove(struct snd_soc_codec *codec) 872{ 873 struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); 874 875 if (gpio_is_valid(priv->gpio_nreset)) 876 /* Set codec to the reset state */ 877 gpio_set_value(priv->gpio_nreset, 0); 878 879 regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); 880 881 return 0; 882}; 883 884static struct snd_soc_codec_driver soc_codec_dev_tas5086 = { 885 .probe = tas5086_probe, 886 .remove = tas5086_remove, 887 .suspend = tas5086_soc_suspend, 888 .resume = tas5086_soc_resume, 889 .controls = tas5086_controls, 890 .num_controls = ARRAY_SIZE(tas5086_controls), 891 .dapm_widgets = tas5086_dapm_widgets, 892 .num_dapm_widgets = ARRAY_SIZE(tas5086_dapm_widgets), 893 .dapm_routes = tas5086_dapm_routes, 894 .num_dapm_routes = ARRAY_SIZE(tas5086_dapm_routes), 895}; 896 897static const struct i2c_device_id tas5086_i2c_id[] = { 898 { "tas5086", 0 }, 899 { } 900}; 901MODULE_DEVICE_TABLE(i2c, tas5086_i2c_id); 902 903static const struct regmap_config tas5086_regmap = { 904 .reg_bits = 8, 905 .val_bits = 32, 906 .max_register = TAS5086_MAX_REGISTER, 907 .reg_defaults = tas5086_reg_defaults, 908 .num_reg_defaults = ARRAY_SIZE(tas5086_reg_defaults), 909 .cache_type = REGCACHE_RBTREE, 910 .volatile_reg = tas5086_volatile_reg, 911 .writeable_reg = tas5086_writeable_reg, 912 .readable_reg = tas5086_accessible_reg, 913 .reg_read = tas5086_reg_read, 914 .reg_write = tas5086_reg_write, 915}; 916 917static int tas5086_i2c_probe(struct i2c_client *i2c, 918 const struct i2c_device_id *id) 919{ 920 struct tas5086_private *priv; 921 struct device *dev = &i2c->dev; 922 int gpio_nreset = -EINVAL; 923 int i, ret; 924 925 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 926 if (!priv) 927 return -ENOMEM; 928 929 for (i = 0; i < ARRAY_SIZE(supply_names); i++) 930 priv->supplies[i].supply = supply_names[i]; 931 932 ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies), 933 priv->supplies); 934 if (ret < 0) { 935 dev_err(dev, "Failed to get regulators: %d\n", ret); 936 return ret; 937 } 938 939 priv->regmap = devm_regmap_init(dev, NULL, i2c, &tas5086_regmap); 940 if (IS_ERR(priv->regmap)) { 941 ret = PTR_ERR(priv->regmap); 942 dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret); 943 return ret; 944 } 945 946 i2c_set_clientdata(i2c, priv); 947 948 if (of_match_device(of_match_ptr(tas5086_dt_ids), dev)) { 949 struct device_node *of_node = dev->of_node; 950 gpio_nreset = of_get_named_gpio(of_node, "reset-gpio", 0); 951 } 952 953 if (gpio_is_valid(gpio_nreset)) 954 if (devm_gpio_request(dev, gpio_nreset, "TAS5086 Reset")) 955 gpio_nreset = -EINVAL; 956 957 priv->gpio_nreset = gpio_nreset; 958 959 ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies); 960 if (ret < 0) { 961 dev_err(dev, "Failed to enable regulators: %d\n", ret); 962 return ret; 963 } 964 965 tas5086_reset(priv); 966 967 /* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */ 968 ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i); 969 if (ret == 0 && i != 0x3) { 970 dev_err(dev, 971 "Failed to identify TAS5086 codec (got %02x)\n", i); 972 ret = -ENODEV; 973 } 974 975 /* 976 * The chip has been identified, so we can turn off the power 977 * again until the dai link is set up. 978 */ 979 regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); 980 981 if (ret == 0) 982 ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_tas5086, 983 &tas5086_dai, 1); 984 985 return ret; 986} 987 988static int tas5086_i2c_remove(struct i2c_client *i2c) 989{ 990 snd_soc_unregister_codec(&i2c->dev); 991 return 0; 992} 993 994static struct i2c_driver tas5086_i2c_driver = { 995 .driver = { 996 .name = "tas5086", 997 .owner = THIS_MODULE, 998 .of_match_table = of_match_ptr(tas5086_dt_ids), 999 }, 1000 .id_table = tas5086_i2c_id, 1001 .probe = tas5086_i2c_probe, 1002 .remove = tas5086_i2c_remove, 1003}; 1004 1005module_i2c_driver(tas5086_i2c_driver); 1006 1007MODULE_AUTHOR("Daniel Mack <zonque@gmail.com>"); 1008MODULE_DESCRIPTION("Texas Instruments TAS5086 ALSA SoC Codec Driver"); 1009MODULE_LICENSE("GPL"); 1010