pr_warn 22 arch/arc/include/asm/bug.h pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \ pr_warn 25 arch/arc/kernel/arc_hostlink.c pr_warn("Hostlink buffer mmap ERROR\n"); pr_warn 443 arch/arc/kernel/setup.c pr_warn("Enable %s for working apps\n", opt_nm); pr_warn 504 arch/arc/kernel/setup.c pr_warn(IGNORE_ARGS "invalid uboot tag: '%08x'\n", uboot_tag); pr_warn 509 arch/arc/kernel/setup.c pr_warn(IGNORE_ARGS "non zero uboot magic\n"); pr_warn 515 arch/arc/kernel/setup.c pr_warn(IGNORE_ARGS "invalid uboot arg: '%px'\n", uboot_arg); pr_warn 72 arch/arc/kernel/smp.c pr_warn("Failed to get possible-cpus from dtb, pretending all %u cpus exist\n", pr_warn 217 arch/arc/kernel/unaligned.c pr_warn("%s(%d): unaligned access to/from 0x%lx by PC: 0x%lx\n", pr_warn 278 arch/arc/kernel/unwind.c pr_warn(".eh_frame_hdr for '%s' present but unusable\n", pr_warn 72 arch/arc/plat-eznps/mtm.c pr_warn("Failed to thread init cpu %u\n", cpu); pr_warn 76 arch/arc/plat-eznps/mtm.c pr_warn("Wrong thread id in thread init for cpu %u\n", cpu); pr_warn 81 arch/arc/plat-eznps/mtm.c pr_warn("Got thread init timeout for cpu %u\n", cpu); pr_warn 592 arch/arm/common/bL_switcher.c pr_warn("big.LITTLE switcher initialization failed\n"); pr_warn 317 arch/arm/common/mcpm_entry.c pr_warn("%s: cpu %u, cluster %u failed to power down (%d)\n", pr_warn 97 arch/arm/kernel/atags_compat.c pr_warn("Warning: bad configuration page, trying to continue\n"); pr_warn 108 arch/arm/kernel/atags_compat.c pr_warn("Warning: bad NeTTrom parameters detected, using defaults\n"); pr_warn 130 arch/arm/kernel/atags_parse.c pr_warn("Ignoring tag cmdline (using the default kernel command line)\n"); pr_warn 167 arch/arm/kernel/atags_parse.c pr_warn("Ignoring unrecognised tag 0x%08x\n", pr_warn 98 arch/arm/kernel/cpuidle.c pr_warn("%pOF: unsupported enable-method property: %s\n", pr_warn 104 arch/arm/kernel/cpuidle.c pr_warn("cpuidle_ops '%s': no init or suspend callback\n", pr_warn 170 arch/arm/kernel/devtree.c pr_warn("DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map\n"); pr_warn 104 arch/arm/kernel/hw_breakpoint.c pr_warn("attempt to read from unknown breakpoint register %d\n", pr_warn 119 arch/arm/kernel/hw_breakpoint.c pr_warn("attempt to write to unknown breakpoint register %d\n", pr_warn 283 arch/arm/kernel/hw_breakpoint.c pr_warn("unknown slot type: %d\n", type); pr_warn 356 arch/arm/kernel/hw_breakpoint.c pr_warn("Can't find any breakpoint slot\n"); pr_warn 408 arch/arm/kernel/hw_breakpoint.c pr_warn("Can't find any breakpoint slot\n"); pr_warn 889 arch/arm/kernel/hw_breakpoint.c pr_warn("Debug register access (0x%x) caused undefined instruction on CPU %d\n", pr_warn 117 arch/arm/kernel/machine_kexec.c pr_warn("Non-crashing CPUs did not react to IPI\n"); pr_warn 102 arch/arm/kernel/psci_smp.c pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n", pr_warn 666 arch/arm/kernel/setup.c pr_warn("Large number of MPIDR hash buckets detected\n"); pr_warn 1025 arch/arm/kernel/setup.c pr_warn("crashkernel reservation failed - memory is in use (0x%lx)\n", pr_warn 1068 arch/arm/kernel/setup.c pr_warn("CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x%x)\n", pr_warn 1070 arch/arm/kernel/setup.c pr_warn("CPU: This may indicate a broken bootloader or firmware.\n"); pr_warn 349 arch/arm/kernel/smp.c pr_warn("CPU%u: smp_ops.cpu_die() returned, trying to resuscitate\n", pr_warn 724 arch/arm/kernel/smp.c pr_warn("SMP: failed to stop secondary CPUs\n"); pr_warn 147 arch/arm/kernel/unwind.c pr_warn("unwind: Unknown symbol address %08lx\n", addr); pr_warn 215 arch/arm/kernel/unwind.c pr_warn("unwind: Corrupt unwind table\n"); pr_warn 323 arch/arm/kernel/unwind.c pr_warn("unwind: 'Refuse to unwind' instruction %04lx\n", pr_warn 347 arch/arm/kernel/unwind.c pr_warn("unwind: Spare encoding %04lx\n", pr_warn 360 arch/arm/kernel/unwind.c pr_warn("unwind: Unhandled instruction %02lx\n", insn); pr_warn 393 arch/arm/kernel/unwind.c pr_warn("unwind: Index not found %08lx\n", frame->pc); pr_warn 412 arch/arm/kernel/unwind.c pr_warn("unwind: Unsupported personality routine %08lx in the index at %p\n", pr_warn 425 arch/arm/kernel/unwind.c pr_warn("unwind: Unsupported personality routine %08lx at %p\n", pr_warn 164 arch/arm/kernel/xscale-cp0.c pr_warn("CAUTION: XScale iWMMXt coprocessor detected, but kernel support is missing.\n"); pr_warn 544 arch/arm/mach-at91/pm.c pr_warn("ramc no standby function available\n"); pr_warn 588 arch/arm/mach-at91/pm.c pr_warn("%s: failed to find sram device!\n", __func__); pr_warn 594 arch/arm/mach-at91/pm.c pr_warn("%s: sram pool unavailable!\n", __func__); pr_warn 600 arch/arm/mach-at91/pm.c pr_warn("%s: unable to alloc sram!\n", __func__); pr_warn 608 arch/arm/mach-at91/pm.c pr_warn("SRAM: Could not map\n"); pr_warn 638 arch/arm/mach-at91/pm.c pr_warn("%s: failed to find sfrbu!\n", __func__); pr_warn 652 arch/arm/mach-at91/pm.c pr_warn("%s: failed to find securam device!\n", __func__); pr_warn 658 arch/arm/mach-at91/pm.c pr_warn("%s: securam pool unavailable!\n", __func__); pr_warn 664 arch/arm/mach-at91/pm.c pr_warn("%s: unable to alloc securam!\n", __func__); pr_warn 711 arch/arm/mach-at91/pm.c pr_warn("%s: failed to find shdwc!\n", __func__); pr_warn 65 arch/arm/mach-bcm/bcm63xx_smp.c pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", pr_warn 81 arch/arm/mach-bcm/bcm63xx_smp.c pr_warn("SMP: secondary CPUs lack VFP unit, disabling VFP\n"); pr_warn 159 arch/arm/mach-bcm/bcm63xx_smp.c pr_warn("SMP: Cortex-A9 SCU setup failed\n"); pr_warn 215 arch/arm/mach-bcm/platsmp-brcmstb.c pr_warn("SMP: refusing to power off CPU0\n"); pr_warn 109 arch/arm/mach-bcm/platsmp.c pr_warn("unable to ioremap SKU-ROM LUT register for cpu %u\n", cpu); pr_warn 133 arch/arm/mach-bcm/platsmp.c pr_warn("failed to enable A9 SCU - disabling SMP\n"); pr_warn 115 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: USB PHY CLK registration failed: %d\n", pr_warn 123 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: USB PHY registration failed: %d\n", pr_warn 128 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: USB 2.0 PinMux setup failed: %d\n", __func__, ret); pr_warn 136 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: USB 2.0 registration failed: %d\n", pr_warn 142 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret); pr_warn 148 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: Unable to register the vbus supply\n", __func__); pr_warn 154 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret); pr_warn 222 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: mmc/sd mux setup failed: %d\n", __func__, ret); pr_warn 230 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: mmc/sd registration failed: %d\n", __func__, ret); pr_warn 393 arch/arm/mach-davinci/board-da830-evm.c pr_warn("WARNING: both MMC/SD and NAND are enabled, but they share AEMIF pins\n" pr_warn 400 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: emif25 mux setup failed: %d\n", __func__, ret); pr_warn 404 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: AEMIF device not registered\n", __func__); pr_warn 419 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: lcdcntl mux setup failed: %d\n", __func__, ret); pr_warn 423 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: lcd setup failed: %d\n", __func__, ret); pr_warn 601 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: GPIO init failed: %d\n", __func__, ret); pr_warn 605 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: edma registration failed: %d\n", __func__, ret); pr_warn 609 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: i2c0 mux setup failed: %d\n", __func__, ret); pr_warn 613 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: i2c0 registration failed: %d\n", __func__, ret); pr_warn 622 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: cpgmac mux setup failed: %d\n", __func__, ret); pr_warn 626 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: emac registration failed: %d\n", __func__, ret); pr_warn 630 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: watchdog registration failed: %d\n", pr_warn 643 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: mcasp1 mux setup failed: %d\n", __func__, ret); pr_warn 651 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: rtc setup failed: %d\n", __func__, ret); pr_warn 656 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: spi info registration failed: %d\n", pr_warn 661 arch/arm/mach-davinci/board-da830-evm.c pr_warn("%s: spi 0 registration failed: %d\n", __func__, ret); pr_warn 347 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: NAND mux setup failed: %d\n", pr_warn 352 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: NOR mux setup failed: %d\n", pr_warn 357 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: registering aemif failed: %d\n", pr_warn 474 arch/arm/mach-davinci/board-da850-evm.c pr_warn("Cannot open UI expander pin %d\n", sel_a); pr_warn 480 arch/arm/mach-davinci/board-da850-evm.c pr_warn("Cannot open UI expander pin %d\n", sel_b); pr_warn 486 arch/arm/mach-davinci/board-da850-evm.c pr_warn("Cannot open UI expander pin %d\n", sel_c); pr_warn 498 arch/arm/mach-davinci/board-da850-evm.c pr_warn("Could not register UI GPIO expander push-buttons"); pr_warn 684 arch/arm/mach-davinci/board-da850-evm.c pr_warn("Could not register baseboard GPIO expander keys"); pr_warn 691 arch/arm/mach-davinci/board-da850-evm.c pr_warn("Could not register baseboard GPIO expander LEDs"); pr_warn 1126 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n", pr_warn 1134 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__); pr_warn 1144 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: EMAC registration failed: %d\n", __func__, ret); pr_warn 1372 arch/arm/mach-davinci/board-da850-evm.c pr_warn("da850_evm_init: VPIF setup failed: %d\n", ret); pr_warn 1376 arch/arm/mach-davinci/board-da850-evm.c pr_warn("da850_evm_init: VPIF capture mux setup failed: %d\n", pr_warn 1381 arch/arm/mach-davinci/board-da850-evm.c pr_warn("da850_evm_init: VPIF capture setup failed: %d\n", ret); pr_warn 1385 arch/arm/mach-davinci/board-da850-evm.c pr_warn("da850_evm_init: VPIF display mux setup failed: %d\n", pr_warn 1390 arch/arm/mach-davinci/board-da850-evm.c pr_warn("da850_evm_init: VPIF display setup failed: %d\n", ret); pr_warn 1407 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: GPIO init failed: %d\n", __func__, ret); pr_warn 1413 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret); pr_warn 1417 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: EDMA registration failed: %d\n", __func__, ret); pr_warn 1421 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret); pr_warn 1425 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret); pr_warn 1430 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: watchdog registration failed: %d\n", pr_warn 1436 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: MMCSD0 mux setup failed: %d\n", pr_warn 1443 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: MMCSD0 registration failed: %d\n", pr_warn 1465 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret); pr_warn 1472 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret); pr_warn 1476 arch/arm/mach-davinci/board-da850-evm.c pr_warn("da850_evm_init: pruss initialization failed: %d\n", pr_warn 1482 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: EVM specific LCD mux setup failed: %d\n", pr_warn 1487 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: LCD initialization failed: %d\n", __func__, ret); pr_warn 1491 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: LCDC registration failed: %d\n", __func__, ret); pr_warn 1495 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: RTC setup failed: %d\n", __func__, ret); pr_warn 1499 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret); pr_warn 1503 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret); pr_warn 1511 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: spi info registration failed: %d\n", __func__, pr_warn 1516 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret); pr_warn 1520 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: SATA registration failed: %d\n", __func__, ret); pr_warn 1524 arch/arm/mach-davinci/board-da850-evm.c pr_warn("%s: dsp/rproc registration failed: %d\n", pr_warn 402 arch/arm/mach-davinci/board-dm355-evm.c pr_warn("%s: GPIO init failed: %d\n", __func__, ret); pr_warn 241 arch/arm/mach-davinci/board-dm355-leopard.c pr_warn("%s: GPIO init failed: %d\n", __func__, ret); pr_warn 715 arch/arm/mach-davinci/board-dm365-evm.c pr_warn("%s(): error registering the aemif device: %d\n", pr_warn 801 arch/arm/mach-davinci/board-dm365-evm.c pr_warn("%s: GPIO init failed: %d\n", __func__, ret); pr_warn 838 arch/arm/mach-davinci/board-dm644x-evm.c pr_warn("%s: GPIO init failed: %d\n", __func__, ret); pr_warn 845 arch/arm/mach-davinci/board-dm644x-evm.c pr_warn("WARNING: both IDE and Flash are enabled, but they share AEMIF pins\n" pr_warn 859 arch/arm/mach-davinci/board-dm644x-evm.c pr_warn("WARNING: both NAND and NOR flash are enabled; disable one of them.\n"); pr_warn 834 arch/arm/mach-davinci/board-dm646x-evm.c pr_warn("%s: GPIO init failed: %d\n", __func__, ret); pr_warn 850 arch/arm/mach-davinci/board-dm646x-evm.c pr_warn("%s: Cannot register AEMIF device.\n", __func__); pr_warn 115 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("cpufreq registration failed: %d\n", ret); pr_warn 132 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("Factory Config not available without CONFIG_NVMEM\n"); pr_warn 139 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("Read Factory Config Failed: %d\n", ret); pr_warn 144 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("Factory Config Magic Wrong (%X)\n", pr_warn 150 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("Factory Config Version Wrong (%X)\n", pr_warn 500 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("%s: Cannot register AEMIF device\n", __func__); pr_warn 543 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("mii/rmii mux setup failed: %d\n", ret); pr_warn 554 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("emac registration failed: %d\n", ret); pr_warn 566 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("edma registration failed: %d\n", ret); pr_warn 570 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("watchdog registration failed: %d\n", ret); pr_warn 580 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("i2c0 registration failed: %d\n", ret); pr_warn 584 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("TPS65023 PMIC init failed: %d\n", ret); pr_warn 591 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("spi info registration failed: %d\n", ret); pr_warn 596 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("spi 1 registration failed: %d\n", ret); pr_warn 602 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("rtc setup failed: %d\n", ret); pr_warn 606 arch/arm/mach-davinci/board-mityomapl138.c pr_warn("cpuidle registration failed: %d\n", ret); pr_warn 184 arch/arm/mach-davinci/board-neuros-osd2.c pr_warn("%s: GPIO init failed: %d\n", __func__, ret); pr_warn 191 arch/arm/mach-davinci/board-neuros-osd2.c pr_warn("WARNING: both IDE and Flash are enabled, but they share AEMIF pins\n" pr_warn 59 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret); pr_warn 71 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: EMAC registration failed: %d\n", __func__, ret); pr_warn 156 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret); pr_warn 164 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret); pr_warn 292 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: NAND mux setup failed: %d\n", __func__, ret); pr_warn 360 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret); pr_warn 366 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: USB PHY CLK registration failed: %d\n", pr_warn 374 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: USB PHY registration failed: %d\n", pr_warn 379 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: Unable to register the vbus supply\n", __func__); pr_warn 385 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret); pr_warn 398 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: GPIO init failed: %d\n", __func__, ret); pr_warn 406 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: EDMA registration failed: %d\n", __func__, ret); pr_warn 414 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: aemif registration failed: %d\n", __func__, ret); pr_warn 418 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: watchdog registration failed: %d\n", pr_warn 423 arch/arm/mach-davinci/board-omapl138-hawk.c pr_warn("%s: dsp/rproc registration failed: %d\n", pr_warn 289 arch/arm/mach-davinci/devices-da8xx.c pr_warn("%s: Failed to register eDMA0\n", __func__); pr_warn 921 arch/arm/mach-davinci/devices-da8xx.c pr_warn("%s: memory not reserved for DSP, not registering DSP device\n", pr_warn 971 arch/arm/mach-davinci/devices-da8xx.c pr_warn("%s: Unable to map DDR2 controller", __func__); pr_warn 826 arch/arm/mach-davinci/dm355.c pr_warn("%s: Failed to register eDMA\n", __func__); pr_warn 832 arch/arm/mach-davinci/dm355.c pr_warn("%s: watchdog init failed: %d\n", __func__, ret); pr_warn 1083 arch/arm/mach-davinci/dm365.c pr_warn("%s: Failed to register eDMA\n", __func__); pr_warn 1092 arch/arm/mach-davinci/dm365.c pr_warn("%s: watchdog init failed: %d\n", __func__, ret); pr_warn 758 arch/arm/mach-davinci/dm644x.c pr_warn("%s: Failed to register eDMA\n", __func__); pr_warn 765 arch/arm/mach-davinci/dm644x.c pr_warn("%s: watchdog init failed: %d\n", __func__, ret); pr_warn 724 arch/arm/mach-davinci/dm646x.c pr_warn("%s: watchdog init failed: %d\n", __func__, ret); pr_warn 88 arch/arm/mach-davinci/mux.c pr_warn("initialized %s\n", cfg->name); pr_warn 94 arch/arm/mach-davinci/mux.c pr_warn("Setting register %s\n", cfg->name); pr_warn 95 arch/arm/mach-davinci/mux.c pr_warn(" %s (0x%08x) = 0x%08x -> 0x%08x\n", pr_warn 112 arch/arm/mach-davinci/pdata-quirks.c pr_warn("%s: VPIF capture setup failed: %d\n", pr_warn 187 arch/arm/mach-davinci/pdata-quirks.c pr_warn("%s: VPIF display setup failed: %d\n", pr_warn 361 arch/arm/mach-davinci/time.c pr_warn("%s: Invalid use of system timers. Results unpredictable.\n", pr_warn 365 arch/arm/mach-davinci/time.c pr_warn("%s: Invalid timer instance setup. Results unpredictable.\n", pr_warn 289 arch/arm/mach-ep93xx/vision_ep9307.c pr_warn("cannot request interrupt gpio for pca9539:74\n"); pr_warn 443 arch/arm/mach-exynos/platsmp.c pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); pr_warn 589 arch/arm/mach-exynos/suspend.c pr_warn("Failed to resume regulators from suspend (%d)\n", ret); pr_warn 671 arch/arm/mach-exynos/suspend.c pr_warn("Outdated DT detected, suspend/resume will NOT work\n"); pr_warn 280 arch/arm/mach-imx/gpc.c pr_warn("Outdated DT detected, suspend/resume will NOT work\n"); pr_warn 533 arch/arm/mach-imx/mach-armadillo5x0.c pr_warn("armadillo5x0_init: failed to get RTC IRQ\n"); pr_warn 187 arch/arm/mach-imx/mach-imx6q.c pr_warn("%s: failed to find fec node\n", __func__); pr_warn 193 arch/arm/mach-imx/mach-imx6q.c pr_warn("%s: failed to get ptp clock\n", __func__); pr_warn 199 arch/arm/mach-imx/mach-imx6q.c pr_warn("%s: failed to get enet clock\n", __func__); pr_warn 255 arch/arm/mach-imx/mach-imx6q.c pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n"); pr_warn 271 arch/arm/mach-imx/mach-imx6q.c pr_warn("failed to initialize soc device\n"); pr_warn 53 arch/arm/mach-imx/mach-imx6sl.c pr_warn("failed to initialize soc device\n"); pr_warn 70 arch/arm/mach-imx/mach-imx6sx.c pr_warn("failed to initialize soc device\n"); pr_warn 63 arch/arm/mach-imx/mach-imx6ul.c pr_warn("failed to initialize soc device\n"); pr_warn 85 arch/arm/mach-imx/mach-imx7d.c pr_warn("failed to initialize soc device\n"); pr_warn 27 arch/arm/mach-imx/mach-imx7ulp.c pr_warn("failed to find fsl,imx7ulp-sim regmap!\n"); pr_warn 32 arch/arm/mach-imx/mach-imx7ulp.c pr_warn("failed to read sim regmap!\n"); pr_warn 424 arch/arm/mach-imx/mach-mx27_3ds.c pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); pr_warn 188 arch/arm/mach-imx/mach-mx31_3ds.c pr_warn("Unable to request the SD/MMC GPIOs.\n"); pr_warn 197 arch/arm/mach-imx/mach-mx31_3ds.c pr_warn("Unable to request the SD/MMC card-detect IRQ.\n"); pr_warn 279 arch/arm/mach-imx/mach-mx31lite.c pr_warn("could not get LAN irq gpio\n"); pr_warn 491 arch/arm/mach-imx/mach-mx35_3ds.c pr_warn("Init of the debugboard failed, all " pr_warn 48 arch/arm/mach-imx/mach-pcm037.c pr_warn("Unknown pcm037 baseboard variant %s\n", str); pr_warn 561 arch/arm/mach-imx/mach-pcm037.c pr_warn("could not get LAN irq gpio\n"); pr_warn 522 arch/arm/mach-imx/mmdc.c pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret); pr_warn 283 arch/arm/mach-imx/pm-imx5.c pr_warn("%s: failed to find ocram node!\n", __func__); pr_warn 289 arch/arm/mach-imx/pm-imx5.c pr_warn("%s: failed to find ocram device!\n", __func__); pr_warn 296 arch/arm/mach-imx/pm-imx5.c pr_warn("%s: ocram pool unavailable!\n", __func__); pr_warn 303 arch/arm/mach-imx/pm-imx5.c pr_warn("%s: unable to alloc ocram!\n", __func__); pr_warn 396 arch/arm/mach-imx/pm-imx5.c pr_warn("%s: cpuidle init failed %d\n", __func__, ret); pr_warn 400 arch/arm/mach-imx/pm-imx5.c pr_warn("%s: No DDR LPM support with suspend %d!\n", pr_warn 475 arch/arm/mach-imx/pm-imx6.c pr_warn("%s: invalid argument!\n", __func__); pr_warn 481 arch/arm/mach-imx/pm-imx6.c pr_warn("%s: failed to find ocram node!\n", __func__); pr_warn 487 arch/arm/mach-imx/pm-imx6.c pr_warn("%s: failed to find ocram device!\n", __func__); pr_warn 494 arch/arm/mach-imx/pm-imx6.c pr_warn("%s: ocram pool unavailable!\n", __func__); pr_warn 501 arch/arm/mach-imx/pm-imx6.c pr_warn("%s: unable to alloc ocram!\n", __func__); pr_warn 525 arch/arm/mach-imx/pm-imx6.c pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret); pr_warn 531 arch/arm/mach-imx/pm-imx6.c pr_warn("%s: failed to get src base %d!\n", __func__, ret); pr_warn 537 arch/arm/mach-imx/pm-imx6.c pr_warn("%s: failed to get iomuxc base %d!\n", __func__, ret); pr_warn 543 arch/arm/mach-imx/pm-imx6.c pr_warn("%s: failed to get gpc base %d!\n", __func__, ret); pr_warn 550 arch/arm/mach-imx/pm-imx6.c pr_warn("%s: failed to get pl310-cache base %d!\n", pr_warn 600 arch/arm/mach-imx/pm-imx6.c pr_warn("%s: No DDR LPM support with suspend %d!\n", pr_warn 630 arch/arm/mach-imx/pm-imx6.c pr_warn("%s: pm_power_off already claimed %p %ps!\n", pr_warn 72 arch/arm/mach-imx/system.c pr_warn("%s: failed to get wdog clock\n", __func__); pr_warn 249 arch/arm/mach-mvebu/coherency.c pr_warn("Can't make current CPU cache coherent.\n"); pr_warn 250 arch/arm/mach-mvebu/coherency.c pr_warn("Coherency fabric is not initialized\n"); pr_warn 89 arch/arm/mach-mvebu/cpu-reset.c pr_warn(FW_WARN "deprecated pmsu binding\n"); pr_warn 74 arch/arm/mach-mvebu/platsmp.c pr_warn("unable to boot CPU: %d\n", ret); pr_warn 239 arch/arm/mach-mvebu/platsmp.c pr_warn("unable to boot CPU: %d\n", ret); pr_warn 196 arch/arm/mach-mvebu/pm.c pr_warn("Entering suspend to RAM. Only special wake-up sources will resume the system\n"); pr_warn 180 arch/arm/mach-mvebu/pmsu.c pr_warn(FW_WARN "deprecated pmsu binding\n"); pr_warn 384 arch/arm/mach-mvebu/pmsu.c pr_warn("CPU idle is currently broken: disabling\n"); pr_warn 431 arch/arm/mach-mvebu/pmsu.c pr_warn("CPU idle is currently broken on Armada 38x: disabling\n"); pr_warn 511 arch/arm/mach-mvebu/pmsu.c pr_warn("CPU hotplug support is currently broken on Armada 38x: disabling\n"); pr_warn 232 arch/arm/mach-omap1/irq.c pr_warn("Couldn't allocate IRQ numbers\n"); pr_warn 345 arch/arm/mach-omap2/board-n8x0.c pr_warn("MMC: notify cover event not available\n"); pr_warn 410 arch/arm/mach-omap2/display.c pr_warn("dss_core: waiting for reset to finish failed\n"); pr_warn 57 arch/arm/mach-omap2/hdq1w.c pr_warn("%s: %s: softreset failed (waited %d usec)\n", pr_warn 67 arch/arm/mach-omap2/i2c.c pr_warn("%s: %s: softreset failed (waited %d usec)\n", pr_warn 526 arch/arm/mach-omap2/id.c pr_warn("Warning: unknown chip type: hawkeye %04x, assuming OMAP3630ES1.2\n", pr_warn 717 arch/arm/mach-omap2/id.c pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n", pr_warn 64 arch/arm/mach-omap2/msdi.c pr_warn("%s: %s: softreset failed (waited %d usec)\n", pr_warn 279 arch/arm/mach-omap2/omap-smp.c pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", pr_warn 320 arch/arm/mach-omap2/omap-smp.c pr_warn("smp: CPU1 not parked?\n"); pr_warn 181 arch/arm/mach-omap2/omap-wakeupgen.c pr_warn("wakeupgen: irq%li polarity inverted in dts\n", pr_warn 135 arch/arm/mach-omap2/omap4-common.c pr_warn("%s:Unable to allocate sram needed to handle errata I688\n", pr_warn 139 arch/arm/mach-omap2/omap4-common.c pr_warn("%s:Unable to get sram pool needed to handle errata I688\n", pr_warn 202 arch/arm/mach-omap2/omap4-common.c pr_warn("%s: lost localtimer interrupt\n", __func__); pr_warn 497 arch/arm/mach-omap2/omap_device.c pr_warn("%s need to update %s to probe with dt\na", pr_warn 541 arch/arm/mach-omap2/omap_hwmod.c pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name); pr_warn 873 arch/arm/mach-omap2/omap_hwmod.c pr_warn("omap_hwmod: %s: cannot clk_get main_clk %s\n", pr_warn 913 arch/arm/mach-omap2/omap_hwmod.c pr_warn("omap_hwmod: %s: cannot clk_get interface_clk %s\n", pr_warn 950 arch/arm/mach-omap2/omap_hwmod.c pr_warn("omap_hwmod: %s: cannot clk_get opt_clk %s\n", pr_warn 1415 arch/arm/mach-omap2/omap_hwmod.c pr_warn("omap_hwmod: %s: could not associate to clkdm %s\n", pr_warn 1455 arch/arm/mach-omap2/omap_hwmod.c pr_warn("omap_hwmod: %s: cannot _init_clocks\n", oh->name); pr_warn 1577 arch/arm/mach-omap2/omap_hwmod.c pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name); pr_warn 1701 arch/arm/mach-omap2/omap_hwmod.c pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", pr_warn 1735 arch/arm/mach-omap2/omap_hwmod.c pr_warn("omap_hwmod: %s: reset can only be entered from enabled state\n", pr_warn 1758 arch/arm/mach-omap2/omap_hwmod.c pr_warn("omap_hwmod: %s: softreset failed (waited %d usec)\n", pr_warn 2408 arch/arm/mach-omap2/omap_hwmod.c pr_warn("omap_hwmod: %s using broken dt data from %pOFn\n", pr_warn 2494 arch/arm/mach-omap2/omap_hwmod.c pr_warn("omap_hwmod: %s: cannot be enabled for reset (%d)\n", pr_warn 283 arch/arm/mach-omap2/pdata-quirks.c pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n"); pr_warn 284 arch/arm/mach-omap2/pdata-quirks.c pr_warn("Thumb binaries may crash randomly without this workaround\n"); pr_warn 158 arch/arm/mach-omap2/pm.c pr_warn("%s: pm soc init failed: %i\n", __func__, error); pr_warn 50 arch/arm/mach-omap2/pm33xx-core.c pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n"); pr_warn 65 arch/arm/mach-omap2/pm33xx-core.c pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n"); pr_warn 372 arch/arm/mach-omap2/pm34xx.c pr_warn("%s: Core OFF disabled due to errata i583\n", pr_warn 457 arch/arm/mach-omap2/pm34xx.c pr_warn("PM: no software I/O chain control; some wakeups may be lost\n"); pr_warn 102 arch/arm/mach-omap2/pm44xx.c pr_warn("A possible cause could be an old bootloader - try u-boot >= v2012.07\n"); pr_warn 269 arch/arm/mach-omap2/pm44xx.c pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n"); pr_warn 413 arch/arm/mach-omap2/prm3xxx.c pr_warn("PRM: I/O chain clock line assertion timed out\n"); pr_warn 325 arch/arm/mach-omap2/prm44xx.c pr_warn("PRM: I/O chain clock line assertion timed out\n"); pr_warn 338 arch/arm/mach-omap2/prm44xx.c pr_warn("PRM: I/O chain clock line deassertion timed out\n"); pr_warn 20 arch/arm/mach-omap2/smartreflex-class3.c pr_warn("%s: Curr voltage unknown. Cannot enable %s\n", pr_warn 475 arch/arm/mach-omap2/timer.c pr_warn("%s: failed to enable counter_32k module (%d)\n", pr_warn 201 arch/arm/mach-omap2/vc.c pr_warn("%s: Retry count exceeded\n", __func__); pr_warn 465 arch/arm/mach-omap2/vc.c pr_warn("%s: invalid setuptime for vdd_%s\n", __func__, pr_warn 618 arch/arm/mach-omap2/vc.c pr_warn("%s: only high speed supported!\n", __func__); pr_warn 655 arch/arm/mach-omap2/vc.c pr_warn("%s: unsupported sysclk rate: %d!\n", __func__, pr_warn 699 arch/arm/mach-omap2/vc.c pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).\n", pr_warn 55 arch/arm/mach-omap2/voltage.c pr_warn("%s: VDD specified does not exist!\n", __func__); pr_warn 77 arch/arm/mach-omap2/voltage.c pr_warn("%s: VDD specified does not exist!\n", __func__); pr_warn 102 arch/arm/mach-omap2/voltage.c pr_warn("%s: not scaling. OPP voltage for %lu, not found.\n", pr_warn 128 arch/arm/mach-omap2/voltage.c pr_warn("%s: VDD specified does not exist!\n", __func__); pr_warn 158 arch/arm/mach-omap2/voltage.c pr_warn("%s: VDD specified does not exist!\n", __func__); pr_warn 186 arch/arm/mach-omap2/voltage.c pr_warn("%s: VDD specified does not exist!\n", __func__); pr_warn 191 arch/arm/mach-omap2/voltage.c pr_warn("%s: voltage table does not exist for vdd_%s\n", pr_warn 220 arch/arm/mach-omap2/voltage.c pr_warn("%s: VDD specified does not exist!\n", __func__); pr_warn 254 arch/arm/mach-omap2/voltage.c pr_warn("%s: Could not get sys clk.\n", __func__); pr_warn 144 arch/arm/mach-omap2/vp.c pr_warn("%s: vdd_%s TRANXDONE timeout exceeded. Voltage change aborted\n", pr_warn 181 arch/arm/mach-omap2/vp.c pr_warn("%s: vdd_%s TRANXDONE timeout exceeded while trying to clear the TRANXDONE status\n", pr_warn 203 arch/arm/mach-omap2/vp.c pr_warn("%s: VDD specified does not exist!\n", __func__); pr_warn 220 arch/arm/mach-omap2/vp.c pr_warn("%s: unable to find current voltage for %s\n", pr_warn 248 arch/arm/mach-omap2/vp.c pr_warn("%s: VDD specified does not exist!\n", __func__); pr_warn 261 arch/arm/mach-omap2/vp.c pr_warn("%s: Trying to disable VP for vdd_%s when it is already disabled\n", pr_warn 278 arch/arm/mach-omap2/vp.c pr_warn("%s: vdd_%s idle timedout\n", __func__, voltdm->name); pr_warn 92 arch/arm/mach-omap2/wd_timer.c pr_warn("%s: %s: softreset failed (waited %d usec)\n", pr_warn 551 arch/arm/mach-orion5x/dns323-setup.c pr_warn("DNS-323: Timeout accessing PHY, assuming rev B1\n"); pr_warn 563 arch/arm/mach-orion5x/dns323-setup.c pr_warn("DNS-323: Timeout reading PHY, assuming rev B1\n"); pr_warn 578 arch/arm/mach-orion5x/dns323-setup.c pr_warn("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n", pr_warn 348 arch/arm/mach-orion5x/terastation_pro2-setup.c pr_warn("tsp2_init: failed to get RTC IRQ\n"); pr_warn 313 arch/arm/mach-orion5x/ts209-setup.c pr_warn("qnap_ts209_init: failed to get RTC IRQ\n"); pr_warn 301 arch/arm/mach-orion5x/ts409-setup.c pr_warn("qnap_ts409_init: failed to get RTC IRQ\n"); pr_warn 359 arch/arm/mach-orion5x/ts78xx-setup.c pr_warn("unrecognised FPGA revision 0x%.2x\n", pr_warn 627 arch/arm/mach-pxa/balloon3.c pr_warn("The FPGA code, version 0x%04x, is too old. " pr_warn 375 arch/arm/mach-pxa/em-x270.c pr_warn("EM-X270: failed to request NAND CS gpio\n"); pr_warn 383 arch/arm/mach-pxa/em-x270.c pr_warn("EM-X270: failed to request NAND R/B gpio\n"); pr_warn 137 arch/arm/mach-pxa/gumstix.c pr_warn("32kHz clock was not on. Bootloader may need to be updated\n"); pr_warn 93 arch/arm/mach-pxa/mfp-pxa2xx.c pr_warn("%s: GPIO%d: unsupported low power mode\n", pr_warn 107 arch/arm/mach-pxa/mfp-pxa2xx.c pr_warn("%s: GPIO%d unable to wakeup\n", __func__, gpio); pr_warn 112 arch/arm/mach-pxa/mfp-pxa2xx.c pr_warn("%s: output GPIO%d unable to wakeup\n", __func__, gpio); pr_warn 124 arch/arm/mach-pxa/mfp-pxa2xx.c pr_warn("%s: GPIO%d is invalid pin\n", __func__, gpio); pr_warn 443 arch/arm/mach-pxa/poodle.c pr_warn("poodle: Unable to register LoCoMo device\n"); pr_warn 74 arch/arm/mach-pxa/pxa3xx-ulpi.c pr_warn("%s: ULPI access timed out!\n", __func__); pr_warn 84 arch/arm/mach-pxa/pxa3xx-ulpi.c pr_warn("%s: PHY is not in SYNCH mode!\n", __func__); pr_warn 101 arch/arm/mach-pxa/pxa3xx-ulpi.c pr_warn("%s: PHY is not in SYNCH mode!\n", __func__); pr_warn 305 arch/arm/mach-qcom/platsmp.c pr_warn("Failed to set CPU boot address, disabling SMP\n"); pr_warn 43 arch/arm/mach-socfpga/pm.c pr_warn("%s: failed to find ocram device!\n", __func__); pr_warn 50 arch/arm/mach-socfpga/pm.c pr_warn("%s: ocram pool unavailable!\n", __func__); pr_warn 57 arch/arm/mach-socfpga/pm.c pr_warn("%s: unable to alloc ocram!\n", __func__); pr_warn 68 arch/arm/mach-socfpga/pm.c pr_warn("%s: __arm_ioremap_exec failed!\n", __func__); pr_warn 99 arch/arm/mach-spear/hotplug.c pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); pr_warn 103 arch/arm/mach-spear/platsmp.c pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", pr_warn 91 arch/arm/mach-tegra/irq.c pr_warn("Outdated DT detected, suspend/resume will NOT work\n"); pr_warn 569 arch/arm/mach-vexpress/spc.c pr_warn("failed to get cpu%d device\n", cpu); pr_warn 574 arch/arm/mach-vexpress/spc.c pr_warn("failed to register cpu%d clock\n", cpu); pr_warn 578 arch/arm/mach-vexpress/spc.c pr_warn("failed to register cpu%d clock lookup\n", cpu); pr_warn 587 arch/arm/mach-vexpress/spc.c pr_warn("failed to initialise cpu%d opp table\n", cpu); pr_warn 590 arch/arm/mach-vexpress/spc.c pr_warn("failed to mark OPPs shared for cpu%d\n", cpu); pr_warn 47 arch/arm/mach-zynq/platsmp.c pr_warn("BOOTUP jump vectors not accessible\n"); pr_warn 76 arch/arm/mach-zynq/platsmp.c pr_warn("Can't start CPU%d: Wrong starting address %x\n", cpu, address); pr_warn 42 arch/arm/mach-zynq/pm.c pr_warn("%s: no compatible node found for '%s'\n", __func__, pr_warn 60 arch/arm/mach-zynq/pm.c pr_warn("%s: Unable to map DDRC IO memory.\n", __func__); pr_warn 114 arch/arm/mm/alignment.c pr_warn("alignment: ignoring faults is unsafe on this CPU. Defaulting to fixup mode.\n"); pr_warn 512 arch/arm/mm/cache-l2x0-pmu.c pr_warn("Unable to allocate L2x0 PMU\n"); pr_warn 618 arch/arm/mm/cache-l2x0.c pr_warn("L2C-310 early BRESP only supported with Cortex-A9\n"); pr_warn 808 arch/arm/mm/cache-l2x0.c pr_warn("L2C: DT/platform modifies aux control register: 0x%08x -> 0x%08x\n", pr_warn 815 arch/arm/mm/cache-l2x0.c pr_warn("L2C: DT/platform tries to modify or specify cache size\n"); pr_warn 969 arch/arm/mm/cache-l2x0.c pr_warn("L2C OF: no cache block/line size given: " pr_warn 977 arch/arm/mm/cache-l2x0.c pr_warn("L2C OF: DT supplied line size %d bytes does " pr_warn 1783 arch/arm/mm/cache-l2x0.c pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n", pr_warn 2252 arch/arm/mm/dma-mapping.c pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n", pr_warn 2258 arch/arm/mm/dma-mapping.c pr_warn("Failed to attached device %s to IOMMU_mapping\n", pr_warn 440 arch/arm/mm/dump.c pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found\n", pr_warn 581 arch/arm/mm/fault.c pr_warn("Hit pending asynchronous external abort (FSR=0x%08x) during " pr_warn 33 arch/arm/mm/idmap.c pr_warn("Failed to allocate identity pmd.\n"); pr_warn 54 arch/arm/mm/init.c pr_warn("ATAG_INITRD is deprecated; " pr_warn 180 arch/arm/mm/mmu.c pr_warn("Only cachepolicy=%s supported on ARMv6 and later\n", pr_warn 198 arch/arm/mm/mmu.c pr_warn("nocache is deprecated; use cachepolicy=%s\n", p); pr_warn 207 arch/arm/mm/mmu.c pr_warn("nowb is deprecated; use cachepolicy=%s\n", p); pr_warn 229 arch/arm/mm/mmu.c pr_warn("cachepolicy kernel parameter not supported without cp15\n"); pr_warn 235 arch/arm/mm/mmu.c pr_warn("noalign kernel parameter not supported without cp15\n"); pr_warn 458 arch/arm/mm/mmu.c pr_warn("Forcing write-allocate cache policy for SMP\n"); pr_warn 462 arch/arm/mm/mmu.c pr_warn("Forcing shared mappings for SMP\n"); pr_warn 933 arch/arm/mm/mmu.c pr_warn("BUG: map for 0x%08llx at 0x%08lx can not be mapped using pages, ignoring.\n", pr_warn 960 arch/arm/mm/mmu.c pr_warn("BUG: not creating mapping for 0x%08llx at 0x%08lx in user region\n", pr_warn 968 arch/arm/mm/mmu.c pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n", pr_warn 1147 arch/arm/mm/mmu.c pr_warn("vmalloc area too small, limiting to %luMB\n", pr_warn 1153 arch/arm/mm/mmu.c pr_warn("vmalloc area is too big, limiting to %luMB\n", pr_warn 305 arch/arm/mm/pmsa-v7.c pr_warn("Truncating memory from %pa to %pa (MPU region constraints)", pr_warn 303 arch/arm/mm/pmsa-v8.c pr_warn("MPU region initialization failure! %d", err); pr_warn 1099 arch/arm/plat-omap/dma.c pr_warn("Spurious interrupt from DMA channel %d (CSR %04x)\n", pr_warn 1104 arch/arm/plat-omap/dma.c pr_warn("DMA timeout with device %d\n", dma_chan[ch].dev_id); pr_warn 1106 arch/arm/plat-omap/dma.c pr_warn("DMA synchronization event drop occurred with device %d\n", pr_warn 1147 arch/arm/plat-omap/dma.c pr_warn("Spurious DMA IRQ for lch %d\n", ch); pr_warn 1153 arch/arm/plat-omap/dma.c pr_warn("IRQ %04x for non-allocated DMA channel %d\n", pr_warn 101 arch/arm/plat-versatile/hotplug.c pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); pr_warn 281 arch/arm/probes/kprobes/core.c pr_warn("Unrecoverable kprobe detected.\n"); pr_warn 293 arch/arm/vfp/vfpsingle.c pr_warn("VFP: estimate_sqrt: invalid significand\n"); pr_warn 57 arch/arm/xen/p2m.c pr_warn("%s: cannot add pfn=%pa -> mfn=%pa: pfn=%pa -> mfn=%pa already exists\n", pr_warn 419 arch/arm64/include/asm/cpufeature.h pr_warn("Attempt to set an illegal CPU capability (%d >= %d)\n", pr_warn 129 arch/arm64/kernel/armv8_deprecated.c pr_warn("CPU[%u] cannot support the emulation of %s", pr_warn 106 arch/arm64/kernel/cpu_ops.c pr_warn("Unsupported enable-method: %s\n", enable_method); pr_warn 655 arch/arm64/kernel/cpufeature.c pr_warn("SANITY CHECK: Unexpected variation in %s. Boot CPU: %#016llx, CPU%d: %#016llx\n", pr_warn 2107 arch/arm64/kernel/cpufeature.c pr_warn("No Cache Writeback Granule information, assuming %d\n", pr_warn 80 arch/arm64/kernel/cpuidle.c pr_warn("Invalid PSCI power state %#x\n", state); pr_warn 265 arch/arm64/kernel/debug-monitors.c pr_warn("Unexpected kernel single-step exception at EL1\n"); pr_warn 332 arch/arm64/kernel/debug-monitors.c pr_warn("Unexpected kernel BRK exception at EL1\n"); pr_warn 743 arch/arm64/kernel/fpsimd.c pr_warn("SVE: cpu%d: Required vector length(s) missing\n", pr_warn 772 arch/arm64/kernel/fpsimd.c pr_warn("SVE: cpu%d: Unsupported vector length(s) present\n", pr_warn 897 arch/arm64/kernel/fpsimd.c pr_warn("SVE: unvirtualisable vector lengths present\n"); pr_warn 251 arch/arm64/kernel/probes/kprobes.c pr_warn("Unrecoverable kprobe detected.\n"); pr_warn 108 arch/arm64/kernel/psci.c pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n", pr_warn 220 arch/arm64/kernel/sdei.c pr_warn("unsafe: exception during handler\n"); pr_warn 168 arch/arm64/kernel/setup.c pr_warn("Large number of MPIDR hash buckets detected\n"); pr_warn 348 arch/arm64/kernel/smp.c pr_warn("CPU%d may not have shut down cleanly: %d\n", pr_warn 689 arch/arm64/kernel/smp.c pr_warn("Number of cores (%d) exceeds configured maximum of %u - clipping\n", pr_warn 126 arch/arm64/kvm/reset.c pr_warn("KVM: SVE vector length for guests limited to %u bytes\n", pr_warn 51 arch/arm64/mm/context.c pr_warn("CPU%d: Unknown ASID size (%d); assuming 8-bit\n", pr_warn 406 arch/arm64/mm/dump.c pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found, %lu non-UXN pages found\n", pr_warn 36 arch/arm64/mm/hugetlbpage.c pr_warn("%s: unrecognized huge page size 0x%lx\n", pr_warn 307 arch/arm64/mm/hugetlbpage.c pr_warn("%s: unrecognized huge page size 0x%lx\n", pr_warn 87 arch/arm64/mm/init.c pr_warn("cannot allocate crashkernel (size:0x%llx)\n", pr_warn 94 arch/arm64/mm/init.c pr_warn("cannot reserve crashkernel: region is not memory\n"); pr_warn 99 arch/arm64/mm/init.c pr_warn("cannot reserve crashkernel: region overlaps reserved memory\n"); pr_warn 104 arch/arm64/mm/init.c pr_warn("cannot reserve crashkernel: base address is not 2MB aligned\n"); pr_warn 158 arch/arm64/mm/init.c pr_warn("elfcorehdr is overlapped\n"); pr_warn 403 arch/arm64/mm/mmu.c pr_warn("BUG: not creating mapping for %pa at 0x%016lx - outside kernel range\n", pr_warn 430 arch/arm64/mm/mmu.c pr_warn("BUG: not updating mapping for %pa at 0x%016lx - outside kernel range\n", pr_warn 847 arch/arm64/mm/mmu.c pr_warn("pmdp %p != %p, %p\n", pr_warn 850 arch/arm64/mm/mmu.c pr_warn("fix_to_virt(FIX_BTMAP_BEGIN): %08lx\n", pr_warn 852 arch/arm64/mm/mmu.c pr_warn("fix_to_virt(FIX_BTMAP_END): %08lx\n", pr_warn 855 arch/arm64/mm/mmu.c pr_warn("FIX_BTMAP_END: %d\n", FIX_BTMAP_END); pr_warn 856 arch/arm64/mm/mmu.c pr_warn("FIX_BTMAP_BEGIN: %d\n", FIX_BTMAP_BEGIN); pr_warn 355 arch/arm64/mm/numa.c pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n", pr_warn 468 arch/arm64/mm/numa.c pr_warn("Unknown node for memory at 0x%llx, assuming node 0\n", addr); pr_warn 117 arch/csky/kernel/perf_callchain.c pr_warn("C-SKY does not support perf in guest mode!"); pr_warn 184 arch/m68k/amiga/config.c pr_warn("amiga_parse_bootinfo: too many AutoConfig devices\n"); pr_warn 424 arch/m68k/amiga/config.c pr_warn("Warning: kernel runs in Zorro II memory\n"); pr_warn 497 arch/m68k/amiga/config.c pr_warn("Cannot allocate ciab.ta{lo,hi}\n"); pr_warn 231 arch/m68k/atari/atakeyb.c pr_warn("Key with scancode %d ", scancode); pr_warn 85 arch/m68k/coldfire/clk.c pr_warn("clk_get: didn't find clock %s\n", clk_name); pr_warn 119 arch/m68k/coldfire/clk.c pr_warn("clk_put %s still enabled\n", clk->name); pr_warn 108 arch/m68k/emu/nfblock.c pr_warn("nfhd%u: invalid block size\n", dev_id); pr_warn 167 arch/m68k/emu/nfblock.c pr_warn("nfhd: unable to get major number\n"); pr_warn 168 arch/m68k/kernel/ints.c pr_warn("unexpected interrupt from %u\n", regs->vector); pr_warn 171 arch/m68k/kernel/setup_mm.c pr_warn("%s: too many memory chunks\n", pr_warn 211 arch/m68k/kernel/setup_mm.c pr_warn("%s: unknown tag 0x%04x ignored\n", __func__, pr_warn 219 arch/m68k/kernel/setup_mm.c pr_warn("%s: ignoring last %i chunks of physical memory\n", pr_warn 256 arch/m68k/kernel/setup_mm.c pr_warn("Enabling workaround for errata I14\n"); pr_warn 820 arch/m68k/mac/config.c pr_warn("No bootinfo model ID, using cpuid instead (obsolete bootloader?)\n"); pr_warn 318 arch/m68k/mac/iop.c pr_warn("IOP: oh my god, they killed the ISM IOP!\n"); pr_warn 320 arch/m68k/mac/iop.c pr_warn("IOP: the ISM IOP seems to be alive.\n"); pr_warn 70 arch/m68k/mm/init.c pr_warn("overlap at %u for chunk %u\n", i, node); pr_warn 51 arch/m68k/q40/q40ints.c pr_warn("%s: ISA IRQ %d not implemented by HW\n", __func__, pr_warn 288 arch/m68k/q40/q40ints.c pr_warn("ISA interrupt from unknown source? EIRQ_REG = %x\n", pr_warn 309 arch/m68k/q40/q40ints.c pr_warn("q40_irq_enable : nested disable/enable\n"); pr_warn 110 arch/m68k/sun3x/prom.c pr_warn("Machine reports strange type %02x\n", pr_warn 112 arch/m68k/sun3x/prom.c pr_warn("Pretending it's a 3/80, but very afraid...\n"); pr_warn 100 arch/microblaze/kernel/cpu/cpuinfo.c pr_warn("%s: No PVR support. Using static CPU info from FDT\n", pr_warn 113 arch/microblaze/kernel/cpu/cpuinfo.c pr_warn("%s: Unsupported PVR setting\n", __func__); pr_warn 118 arch/microblaze/kernel/cpu/cpuinfo.c pr_warn("%s: Stream instructions enabled" pr_warn 44 arch/microblaze/kernel/exceptions.c pr_warn("Oops: %s, sig: %ld\n", str, err); pr_warn 77 arch/microblaze/kernel/exceptions.c pr_warn("Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n", pr_warn 89 arch/microblaze/kernel/exceptions.c pr_warn("Illegal opcode exception in kernel mode.\n"); pr_warn 98 arch/microblaze/kernel/exceptions.c pr_warn("Instruction bus error exception in kernel mode.\n"); pr_warn 107 arch/microblaze/kernel/exceptions.c pr_warn("Data bus error exception in kernel mode.\n"); pr_warn 116 arch/microblaze/kernel/exceptions.c pr_warn("Divide by zero exception in kernel mode.\n"); pr_warn 144 arch/microblaze/kernel/exceptions.c pr_warn("Unexpected exception %02x PC=%08x in %s mode\n", pr_warn 49 arch/microblaze/mm/consistent.c pr_warn("ERROR: Your cache coherent area is CACHED!!!\n"); pr_warn 101 arch/microblaze/mm/fault.c pr_warn("kernel task_size exceed"); pr_warn 74 arch/microblaze/mm/pgtable.c pr_warn("__ioremap(): phys addr "PTE_FMT" is RAM lr %ps\n", pr_warn 735 arch/microblaze/pci/pci-common.c pr_warn("PCI: Cannot allocate resource region "); pr_warn 758 arch/microblaze/pci/pci-common.c pr_warn("PCI: Cannot allocate resource region %d ", idx); pr_warn 917 arch/microblaze/pci/pci-common.c pr_warn("PCI: I/O resource not set for host "); pr_warn 838 arch/mips/alchemy/devboards/db1200.c pr_warn("DB1200: cant get I2C close to 50MHz\n"); pr_warn 819 arch/mips/alchemy/devboards/db1300.c pr_warn("DB1300: failed to init touch pen irq support!\n"); pr_warn 296 arch/mips/ar7/platform.c pr_warn("cannot parse mac address, using random address\n"); pr_warn 646 arch/mips/ar7/platform.c pr_warn("unable to register gpios: %d\n", res); pr_warn 654 arch/mips/ar7/platform.c pr_warn("unable to register physmap-flash: %d\n", res); pr_warn 662 arch/mips/ar7/platform.c pr_warn("unable to register vlynq-low: %d\n", res); pr_warn 668 arch/mips/ar7/platform.c pr_warn("unable to register vlynq-high: %d\n", res); pr_warn 679 arch/mips/ar7/platform.c pr_warn("unable to register cpmac-high: %d\n", pr_warn 682 arch/mips/ar7/platform.c pr_warn("unable to add cpmac-high phy: %d\n", res); pr_warn 691 arch/mips/ar7/platform.c pr_warn("unable to register cpmac-low: %d\n", res); pr_warn 693 arch/mips/ar7/platform.c pr_warn("unable to add cpmac-low phy: %d\n", res); pr_warn 698 arch/mips/ar7/platform.c pr_warn("unable to register leds: %d\n", res); pr_warn 702 arch/mips/ar7/platform.c pr_warn("unable to register usb slave: %d\n", res); pr_warn 717 arch/mips/ar7/platform.c pr_warn("unable to register watchdog: %d\n", res); pr_warn 133 arch/mips/ath25/board.c pr_warn("WARNING: No board configuration data found!\n"); pr_warn 143 arch/mips/ath25/board.c pr_warn("WARNING: broken board data detected\n"); pr_warn 161 arch/mips/ath25/board.c pr_warn("WARNING: Could not find Radio Configuration data\n"); pr_warn 175 arch/mips/bcm47xx/prom.c pr_warn("Found %lu MiB of extra memory, but highmem is unsupported yet!\n", pr_warn 121 arch/mips/bcm63xx/dev-flash.c pr_warn("unsupported serial flash detected\n"); pr_warn 124 arch/mips/bcm63xx/dev-flash.c pr_warn("unsupported NAND flash detected\n"); pr_warn 37 arch/mips/bcm63xx/nvram.c pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n", pr_warn 1587 arch/mips/cavium-octeon/octeon-irq.c pr_warn("No \"interrupts\" property.\n"); pr_warn 1596 arch/mips/cavium-octeon/octeon-irq.c pr_warn("No \"interrupts\" property.\n"); pr_warn 1601 arch/mips/cavium-octeon/octeon-irq.c pr_warn("No \"interrupts\" property.\n"); pr_warn 1606 arch/mips/cavium-octeon/octeon-irq.c pr_warn("Bad \"#interrupt-cells\" property: %u\n", pr_warn 1618 arch/mips/cavium-octeon/octeon-irq.c pr_warn("Cannot allocate memory for GPIO irq_domain.\n"); pr_warn 91 arch/mips/generic/board-sead3.c pr_warn("unable to set UART interrupt-parent: %d\n", pr_warn 55 arch/mips/generic/yamon-dt.c pr_warn("Number of regions exceeds max %u\n", pr_warn 96 arch/mips/generic/yamon-dt.c pr_warn("Failed to read the '%s' env variable '%s'\n", pr_warn 101 arch/mips/generic/yamon-dt.c pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n"); pr_warn 171 arch/mips/generic/yamon-dt.c pr_warn("yamontty environment variable '%s' invalid\n", pr_warn 1316 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called with tag switch in progress\n", function); pr_warn 1334 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("Tag switch is taking a long time, possible deadlock\n"); pr_warn 1545 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called with NULL_NULL tag\n", __func__); pr_warn 1547 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called with NULL tag\n", __func__); pr_warn 1550 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called to perform a tag switch to the same tag\n", pr_warn 1553 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called to perform a tag switch to NULL. Use cvmx_pow_tag_sw_null() instead\n", pr_warn 1653 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called with NULL_NULL tag\n", __func__); pr_warn 1656 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called to perform a tag switch to the same tag\n", pr_warn 1659 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called to perform a tag switch to NULL. Use cvmx_pow_tag_sw_null() instead\n", pr_warn 1663 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s passed WQE(%p) doesn't match the address in the POW(%p)\n", pr_warn 1749 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called with NULL_NULL tag\n", __func__); pr_warn 1751 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called when we already have a NULL tag\n", pr_warn 1966 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called with NULL_NULL tag\n", __func__); pr_warn 1968 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called with NULL tag. Deschedule not allowed from NULL state\n", pr_warn 1972 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called where neither the before or after tag is ATOMIC\n", pr_warn 2070 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called with NULL_NULL tag\n", __func__); pr_warn 2072 arch/mips/include/asm/octeon/cvmx-pow.h pr_warn("%s called with NULL tag. Deschedule not expected from NULL state\n", pr_warn 402 arch/mips/kernel/cpu-probe.c pr_warn("Can't turn FTLB off\n"); pr_warn 413 arch/mips/kernel/cpu-probe.c pr_warn("FTLB could not be disabled!\n"); pr_warn 42 arch/mips/kernel/crash_dump.c pr_warn("Kdump: Kdump buffer page not allocated\n"); pr_warn 61 arch/mips/kernel/crash_dump.c pr_warn("Kdump: Failed to allocate kdump buffer page\n"); pr_warn 64 arch/mips/kernel/csrc-r4k.c pr_warn("Not using R4K clocksource in VDSO due to broken RDHWR\n"); pr_warn 340 arch/mips/kernel/module.c pr_warn("%s: Unknown symbol %s\n", pr_warn 561 arch/mips/kernel/perf_event_mipsxx.c pr_warn("Unable to request IRQ%d for MIPS performance counters!\n", pr_warn 572 arch/mips/kernel/perf_event_mipsxx.c pr_warn("The platform hasn't properly defined its interrupt controller\n"); pr_warn 689 arch/mips/kernel/pm-cps.c pr_warn("JTAG probe is connected - abort suspend\n"); pr_warn 702 arch/mips/kernel/pm-cps.c pr_warn("pm-cps: no CM, non-coherent states unavailable\n"); pr_warn 714 arch/mips/kernel/pm-cps.c pr_warn("pm-cps: non-coherent wait unavailable\n"); pr_warn 722 arch/mips/kernel/pm-cps.c pr_warn("pm-cps: CPC does not support clock gating\n"); pr_warn 728 arch/mips/kernel/pm-cps.c pr_warn("pm-cps: CPS SMP not in use, power gating unavailable\n"); pr_warn 730 arch/mips/kernel/pm-cps.c pr_warn("pm-cps: no CPC, clock & power gating unavailable\n"); pr_warn 706 arch/mips/kernel/process.c pr_warn("Unable to send backtrace IPI to CPU%u - perhaps it hung?\n", pr_warn 42 arch/mips/kernel/prom.c pr_warn("Trying to add an invalid memory region, skipped\n"); pr_warn 48 arch/mips/kernel/prom.c pr_warn("Truncate memory region %llx @ %llx to size %llx\n", pr_warn 53 arch/mips/kernel/rtlx-cmp.c pr_warn("VPE loader: not a MIPS MT capable processor\n"); pr_warn 58 arch/mips/kernel/rtlx-cmp.c pr_warn("No TCs reserved for AP/SP, not initializing RTLX.\n" pr_warn 79 arch/mips/kernel/rtlx-mt.c pr_warn("VPE loader: not a MIPS MT capable processor\n"); pr_warn 84 arch/mips/kernel/rtlx-mt.c pr_warn("No TCs reserved for AP/SP, not initializing RTLX.\n" pr_warn 154 arch/mips/kernel/rtlx.c pr_warn("vpe_get_shared returned an invalid pointer maybe an error code %d\n", pr_warn 107 arch/mips/kernel/setup.c pr_warn("Trying to add an invalid memory region, skipped\n"); pr_warn 498 arch/mips/kernel/setup.c pr_warn("Invalid memory region reserved for crash kernel\n"); pr_warn 152 arch/mips/kernel/smp-cps.c pr_warn("Using only one core due to %s%s%s\n", pr_warn 269 arch/mips/kernel/smp-cps.c pr_warn("Waiting for core %u to start... STAT_CONF=0x%x\n", pr_warn 633 arch/mips/kernel/smp-cps.c pr_warn("MIPS CPS SMP unable to proceed without a CM\n"); pr_warn 639 arch/mips/kernel/smp-cps.c pr_warn("MIPS CPS SMP unable to proceed without a GIC\n"); pr_warn 97 arch/mips/kernel/vpe-cmp.c pr_warn("VPE loader: not a MIPS MT capable processor\n"); pr_warn 102 arch/mips/kernel/vpe-cmp.c pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n" pr_warn 109 arch/mips/kernel/vpe-cmp.c pr_warn("VPE loader: unable to register character device\n"); pr_warn 132 arch/mips/kernel/vpe-cmp.c pr_warn("VPE: unable to allocate TC\n"); pr_warn 140 arch/mips/kernel/vpe-cmp.c pr_warn("VPE: unable to allocate VPE\n"); pr_warn 37 arch/mips/kernel/vpe-mt.c pr_warn("VPE loader: only Master VPE's are able to config MT\n"); pr_warn 51 arch/mips/kernel/vpe-mt.c pr_warn("VPE loader: No TC's associated with VPE %d\n", pr_warn 71 arch/mips/kernel/vpe-mt.c pr_warn("VPE loader: TC %d is already active!\n", pr_warn 337 arch/mips/kernel/vpe-mt.c pr_warn("VPE loader: not a MIPS MT capable processor\n"); pr_warn 342 arch/mips/kernel/vpe-mt.c pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n" pr_warn 349 arch/mips/kernel/vpe-mt.c pr_warn("No TCs reserved for AP/SP, not initialize VPE loader\n" pr_warn 357 arch/mips/kernel/vpe-mt.c pr_warn("VPE loader: unable to register character device\n"); pr_warn 415 arch/mips/kernel/vpe-mt.c pr_warn("VPE: unable to allocate VPE\n"); pr_warn 459 arch/mips/kernel/vpe.c pr_warn("VPE loader: .text+0x%x relocation type %s for symbol \"%s\" failed\n", pr_warn 597 arch/mips/kernel/vpe.c pr_warn("VPE loader: program wrong arch or weird elf version\n"); pr_warn 736 arch/mips/kernel/vpe.c pr_warn("VPE loader: program does not contain a __start symbol\n"); pr_warn 741 arch/mips/kernel/vpe.c pr_warn("VPE loader: program does not contain vpe_shared symbol.\n" pr_warn 774 arch/mips/kernel/vpe.c pr_warn("VPE loader: only vpe1 is supported\n"); pr_warn 781 arch/mips/kernel/vpe.c pr_warn("VPE loader: unable to get vpe\n"); pr_warn 800 arch/mips/kernel/vpe.c pr_warn("VPE loader: unable to allocate memory\n"); pr_warn 810 arch/mips/kernel/vpe.c pr_warn("VPE loader: open, getcwd returned %d\n", ret); pr_warn 834 arch/mips/kernel/vpe.c pr_warn("VPE loader: ELF load failed.\n"); pr_warn 838 arch/mips/kernel/vpe.c pr_warn("VPE loader: only elf files are supported\n"); pr_warn 855 arch/mips/kernel/vpe.c pr_warn("VPE loader: ELF load failed.\n"); pr_warn 875 arch/mips/kernel/vpe.c pr_warn("VPE loader: elf size too big. Perhaps strip unneeded symbols\n"); pr_warn 1720 arch/mips/kvm/mips.c pr_warn("KVM does not yet support MMIDs. KVM Disabled\n"); pr_warn 181 arch/mips/lantiq/xway/sysctrl.c pr_warn("deactivating PMU module failed!"); pr_warn 244 arch/mips/lantiq/xway/sysctrl.c pr_warn("deactivating PMU module failed!"); pr_warn 310 arch/mips/mm/init.c pr_warn("Not enough MAAR pairs (%u) for all memory regions (%u)\n", pr_warn 2504 arch/mips/mm/tlbex.c pr_warn("Unsupported PTEI field value: 0x%lx. HTW will not be enabled", pr_warn 158 arch/mips/mti-malta/malta-dtshim.c pr_warn("Failed to read the '%s' env variable '%s'\n", pr_warn 163 arch/mips/mti-malta/malta-dtshim.c pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n"); pr_warn 256 arch/mips/mti-malta/malta-dtshim.c pr_warn("malta-dtshim: unable to find DT GIC node: %d\n", pr_warn 263 arch/mips/mti-malta/malta-dtshim.c pr_warn("malta-dtshim: unable to nop GIC node\n"); pr_warn 267 arch/mips/mti-malta/malta-dtshim.c pr_warn("malta-dtshim: unable to find DT i8259 node: %d\n", pr_warn 275 arch/mips/mti-malta/malta-dtshim.c pr_warn("malta-dtshim: unable to find CPU intc node: %d\n", pr_warn 282 arch/mips/mti-malta/malta-dtshim.c pr_warn("malta-dtshim: unable to get CPU intc phandle\n"); pr_warn 288 arch/mips/mti-malta/malta-dtshim.c pr_warn("malta-dtshim: unable to set i8259 interrupt-parent: %d\n", pr_warn 295 arch/mips/mti-malta/malta-dtshim.c pr_warn("malta-dtshim: unable to set i8259 interrupts: %d\n", pr_warn 166 arch/mips/mti-malta/malta-setup.c pr_warn("WARNING: PCI clock is %dMHz, setting pci_clock\n", pr_warn 171 arch/mips/mti-malta/malta-setup.c pr_warn("WARNING: IDE timing calculations will be " pr_warn 97 arch/mips/netlogic/xlr/fmn.c pr_warn("No msgring handler for stnid %d\n", pr_warn 120 arch/mips/pci/pci-mt7620.c pr_warn("PCIE-PHY retry failed.\n"); pr_warn 90 arch/mips/pci/pci-tx4927.c pr_warn("Failed to request irq for PCIERR\n"); pr_warn 141 arch/mips/pci/pci-tx4938.c pr_warn("Failed to request irq for PCIERR\n"); pr_warn 106 arch/mips/pci/pci-tx4939.c pr_warn("Failed to request irq for PCIERR\n"); pr_warn 66 arch/mips/sgi-ip27/ip27-xtalk.c pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget); pr_warn 32 arch/mips/txx9/generic/setup_tx4927.c pr_warn("Watchdog reset detected at 0x%lx\n", pr_warn 34 arch/mips/txx9/generic/setup_tx4938.c pr_warn("Watchdog reset detected at 0x%lx\n", pr_warn 38 arch/mips/txx9/generic/setup_tx4939.c pr_warn("Watchdog reset detected at 0x%lx\n", pr_warn 108 arch/mips/txx9/generic/smsc_fdc37m81x.c pr_warn("%s: stepping on old base=0x%0*lx\n", __func__, field, pr_warn 119 arch/mips/txx9/generic/smsc_fdc37m81x.c pr_warn("%s: unknown chip id 0x%02x\n", __func__, chip_id); pr_warn 130 arch/mips/txx9/rbtx4938/setup.c pr_warn("seeprom: bad signature.\n"); pr_warn 134 arch/mips/txx9/rbtx4938/setup.c pr_warn("seeprom: bad checksum.\n"); pr_warn 13 arch/nds32/mm/alignment.c pr_warn("[ %30s() ] ", __func__); \ pr_warn 14 arch/nds32/mm/alignment.c pr_warn(__VA_ARGS__); \ pr_warn 83 arch/nios2/kernel/cpuinfo.c pr_warn("Warning: icache size configuration mismatch " pr_warn 90 arch/nios2/kernel/cpuinfo.c pr_warn("Warning: dcache line size configuration mismatch " pr_warn 96 arch/nios2/kernel/cpuinfo.c pr_warn("Warning: dcache size configuration mismatch " pr_warn 36 arch/nios2/kernel/traps.c pr_warn("Oops: %s, sig: %ld\n", str, err); pr_warn 89 arch/openrisc/kernel/smp.c pr_warn("CPU%u: failed to start, IPI controller missing", pr_warn 155 arch/parisc/kernel/drivers.c pr_warn("BUG: skipping previously registered driver %s\n", pr_warn 161 arch/parisc/kernel/drivers.c pr_warn("BUG: driver %s has no probe routine\n", driver->name); pr_warn 546 arch/parisc/kernel/drivers.c pr_warn("Unable to claim HPA %lx for device %s\n", hpa, name); pr_warn 130 arch/parisc/kernel/pdt.c pr_warn("PDT: BAD MEMORY at 0x%08lx, %s%s%s-bit error.\n", pr_warn 194 arch/parisc/kernel/pdt.c pr_warn("PDT: Firmware reports %lu entries of faulty memory:\n", pr_warn 216 arch/parisc/kernel/pdt.c pr_warn("PDT: Get PDT entries failed with %d\n", ret); pr_warn 272 arch/parisc/kernel/pdt.c pr_warn("PDT: unexpected failure %d\n", ret); pr_warn 482 arch/parisc/kernel/signal.c pr_warn("syscall restart: %s (pid %d): unexpected opcode 0x%08x\n", pr_warn 119 arch/parisc/kernel/unwind.c pr_warn("Out of order unwind entry! %px and %px\n", pr_warn 244 arch/parisc/mm/fault.c pr_warn("\n"); pr_warn 245 arch/parisc/mm/fault.c pr_warn("do_page_fault() command='%s' type=%lu address=0x%08lx", pr_warn 93 arch/powerpc/include/asm/cpuidle.h pr_warn("Invalid psscr 0x%016llx : ESL,EC bits unequal", pr_warn 97 arch/powerpc/include/asm/cpuidle.h pr_warn("Invalid psscr 0x%016llx : ESL cleared for deep stop-state", pr_warn 848 arch/powerpc/kernel/dt_cpu_ftrs.c pr_warn("%s: missing isa property\n", uname); pr_warn 855 arch/powerpc/kernel/dt_cpu_ftrs.c pr_warn("%s: missing usable-privilege property", uname); pr_warn 890 arch/powerpc/kernel/dt_cpu_ftrs.c pr_warn("%s: HV feature passed to guest\n", uname); pr_warn 895 arch/powerpc/kernel/dt_cpu_ftrs.c pr_warn("%s: unwanted hfscr_bit_nr\n", uname); pr_warn 901 arch/powerpc/kernel/dt_cpu_ftrs.c pr_warn("%s: missing hfscr_bit_nr\n", uname); pr_warn 907 arch/powerpc/kernel/dt_cpu_ftrs.c pr_warn("%s: unwanted hv_support/hfscr_bit_nr\n", uname); pr_warn 914 arch/powerpc/kernel/dt_cpu_ftrs.c pr_warn("%s: unwanted fscr_bit_nr\n", uname); pr_warn 920 arch/powerpc/kernel/dt_cpu_ftrs.c pr_warn("%s: missing fscr_bit_nr\n", uname); pr_warn 926 arch/powerpc/kernel/dt_cpu_ftrs.c pr_warn("%s: unwanted os_support/fscr_bit_nr\n", uname); pr_warn 933 arch/powerpc/kernel/dt_cpu_ftrs.c pr_warn("%s: unwanted hwcap_bit_nr\n", uname); pr_warn 961 arch/powerpc/kernel/dt_cpu_ftrs.c pr_warn("%s: missing dependencies property", f->name); pr_warn 177 arch/powerpc/kernel/eeh.c pr_warn("EEH: Note: No error log for absent device.\n"); pr_warn 184 arch/powerpc/kernel/eeh.c pr_warn("EEH: of node=%04x:%02x:%02x.%01x\n", pr_warn 190 arch/powerpc/kernel/eeh.c pr_warn("EEH: PCI device/vendor: %08x\n", cfg); pr_warn 194 arch/powerpc/kernel/eeh.c pr_warn("EEH: PCI cmd/status register: %08x\n", cfg); pr_warn 200 arch/powerpc/kernel/eeh.c pr_warn("EEH: Bridge secondary status: %04x\n", cfg); pr_warn 204 arch/powerpc/kernel/eeh.c pr_warn("EEH: Bridge control: %04x\n", cfg); pr_warn 212 arch/powerpc/kernel/eeh.c pr_warn("EEH: PCI-X cmd: %08x\n", cfg); pr_warn 216 arch/powerpc/kernel/eeh.c pr_warn("EEH: PCI-X status: %08x\n", cfg); pr_warn 223 arch/powerpc/kernel/eeh.c pr_warn("EEH: PCI-E capabilities and status follow:\n"); pr_warn 231 arch/powerpc/kernel/eeh.c pr_warn("%s\n", buffer); pr_warn 243 arch/powerpc/kernel/eeh.c pr_warn("%s\n", buffer); pr_warn 250 arch/powerpc/kernel/eeh.c pr_warn("EEH: PCI-E AER capability register set follows:\n"); pr_warn 258 arch/powerpc/kernel/eeh.c pr_warn("%s\n", buffer); pr_warn 269 arch/powerpc/kernel/eeh.c pr_warn("%s\n", buffer); pr_warn 399 arch/powerpc/kernel/eeh.c pr_warn("%s Can't find PE for PHB#%x\n", pr_warn 654 arch/powerpc/kernel/eeh.c pr_warn("%s: Invalid function %d\n", pr_warn 681 arch/powerpc/kernel/eeh.c pr_warn("%s: Unexpected state change %d on " pr_warn 936 arch/powerpc/kernel/eeh.c pr_warn("EEH: Failure %d resetting PHB#%x-PE#%x (attempt %d)\n\n", pr_warn 941 arch/powerpc/kernel/eeh.c pr_warn("EEH: PHB#%x-PE#%x: Successful reset (attempt %d)\n", pr_warn 947 arch/powerpc/kernel/eeh.c pr_warn("EEH: Unrecoverable slot failure on PHB#%x-PE#%x", pr_warn 955 arch/powerpc/kernel/eeh.c pr_warn("EEH: PHB#%x-PE#%x: Slot inactive after reset: 0x%x (attempt %d)\n", pr_warn 1011 arch/powerpc/kernel/eeh.c pr_warn("%s: Invalid EEH ops name for %p\n", pr_warn 1017 arch/powerpc/kernel/eeh.c pr_warn("%s: EEH ops of platform %s already existing (%s)\n", pr_warn 1037 arch/powerpc/kernel/eeh.c pr_warn("%s: Invalid EEH ops name\n", pr_warn 1084 arch/powerpc/kernel/eeh.c pr_warn("%s: Failed to register notifier (%d)\n", pr_warn 1091 arch/powerpc/kernel/eeh.c pr_warn("%s: Platform EEH operation not found\n", pr_warn 1330 arch/powerpc/kernel/eeh.c pr_warn("%s: Failure %d enabling IO on PHB#%x-PE#%x\n", pr_warn 1337 arch/powerpc/kernel/eeh.c pr_warn("%s: Failure %d enabling DMA on PHB#%x-PE#%x\n", pr_warn 1645 arch/powerpc/kernel/eeh.c pr_warn("%s: Failure %d reenabling %s\n", pr_warn 136 arch/powerpc/kernel/eeh_cache.c pr_warn("PIAR: overlapping address range\n"); pr_warn 168 arch/powerpc/kernel/eeh_cache.c pr_warn("PCI: no pci dn found for dev=%s\n", pr_warn 175 arch/powerpc/kernel/eeh_cache.c pr_warn("PCI: no EEH dev found for %s\n", pr_warn 950 arch/powerpc/kernel/eeh_driver.c pr_warn("EEH: This PCI device has failed %d times in the last hour and will be permanently disabled after %d failures.\n", pr_warn 969 arch/powerpc/kernel/eeh_driver.c pr_warn("EEH: Permanent failure\n"); pr_warn 991 arch/powerpc/kernel/eeh_driver.c pr_warn("%s: Unable to reset, err=%d\n", pr_warn 1038 arch/powerpc/kernel/eeh_driver.c pr_warn("%s: Cannot reset, err=%d\n", pr_warn 1188 arch/powerpc/kernel/eeh_driver.c pr_warn("%s: Invalid value %d from next_error()\n", pr_warn 129 arch/powerpc/kernel/eeh_pe.c pr_warn("%s: Timeout when getting PE's state (%d)\n", pr_warn 135 arch/powerpc/kernel/eeh_pe.c pr_warn("%s: Firmware returned bad wait value %d\n", pr_warn 139 arch/powerpc/kernel/eeh_pe.c pr_warn("%s: Firmware returned too long wait value %d\n", pr_warn 241 arch/powerpc/kernel/eeh_pe.c pr_warn("%s: Invalid PE %p\n", pr_warn 170 arch/powerpc/kernel/eeh_sysfs.c pr_warn("EEH: Unable to create sysfs entries\n"); pr_warn 274 arch/powerpc/kernel/fadump.c pr_warn("'fadump_reserve_mem=' parameter is deprecated in favor of 'crashkernel=' parameter.\n"); pr_warn 1234 arch/powerpc/kernel/fadump.c pr_warn("some reserved ranges are ignored!\n"); pr_warn 1322 arch/powerpc/kernel/fadump.c pr_warn("Failed to setup kernel metadata!\n"); pr_warn 127 arch/powerpc/kernel/iommu.c pr_warn("Unable to create IOMMU fault injection sysfs " pr_warn 758 arch/powerpc/kernel/iommu.c pr_warn("%s: Unexpected TCEs\n", __func__); pr_warn 947 arch/powerpc/kernel/iommu.c pr_warn("powerpc iommu api: cannot create new group, err=%ld\n", pr_warn 186 arch/powerpc/kernel/isa-bridge.c pr_warn("ISA: Non-PCI bridge %pOF is missing address format\n", pr_warn 193 arch/powerpc/kernel/isa-bridge.c pr_warn("ISA: Non-PCI bridge %pOF has unsupported address format\n", pr_warn 202 arch/powerpc/kernel/isa-bridge.c pr_warn("ISA: Non-PCI bridge %pOF has absent or invalid ranges\n", pr_warn 219 arch/powerpc/kernel/isa-bridge.c pr_warn("ISA: Non-PCI bridge %pOF has no usable IO range\n", pr_warn 232 arch/powerpc/kernel/isa-bridge.c pr_warn("ISA: Non-PCI bridge %pOF failed to translate IO base\n", pr_warn 239 arch/powerpc/kernel/isa-bridge.c pr_warn("ISA: Non-PCI bridge %pOF has non aligned IO range\n", pr_warn 288 arch/powerpc/kernel/mce.c pr_warn("Failed to identify bad address from " pr_warn 1212 arch/powerpc/kernel/pci-common.c pr_warn("PCI: Cannot allocate resource region %d of PCI bridge %d, will remap\n", pr_warn 1009 arch/powerpc/kernel/rtas.c pr_warn("%s: Could not restore CPUs to offline state.\n", pr_warn 451 arch/powerpc/kernel/security.c pr_warn("Spectre v2 mitigations not fully under software control, can't disable\n"); pr_warn 247 arch/powerpc/kernel/stacktrace.c pr_warn("CPU %d didn't respond to backtrace IPI, inspecting paca.\n", cpu); pr_warn 249 arch/powerpc/kernel/stacktrace.c pr_warn("paca pointer appears corrupt? (%px)\n", p); pr_warn 253 arch/powerpc/kernel/stacktrace.c pr_warn("irq_soft_mask: 0x%02x in_mce: %d in_nmi: %d", pr_warn 262 arch/powerpc/kernel/stacktrace.c pr_warn("Back trace of paca->saved_r1 (0x%016llx) (possibly stale):\n", p->saved_r1); pr_warn 1039 arch/powerpc/kernel/time.c pr_warn("time_init: firmware supplied invalid ibm,dec-bits"); pr_warn 427 arch/powerpc/kernel/watchdog.c pr_warn("could not be initialized"); pr_warn 4896 arch/powerpc/kvm/book3s_hv.c pr_warn("KVM: Ignoring indep_threads_mode=N in nested hypervisor\n"); pr_warn 5045 arch/powerpc/kvm/book3s_hv.c pr_warn("kvmppc_set_passthru_irq_hv: Could not assign IRQ map for (%d,%d)\n", pr_warn 5177 arch/powerpc/kvm/book3s_hv.c pr_warn("kvmppc_clr_passthru_irq (irq %d, gsi %d) fails: %d\n", pr_warn 418 arch/powerpc/kvm/book3s_xics.c pr_warn("icp_deliver_irq: IRQ 0x%06x server 0x%x not found !\n", pr_warn 322 arch/powerpc/kvm/book3s_xive.c pr_warn("%s: Can't find server %d\n", __func__, server); pr_warn 644 arch/powerpc/kvm/book3s_xive_native.c pr_warn("Incompatible host page size %lx!\n", page_size); pr_warn 45 arch/powerpc/kvm/book3s_xive_template.c pr_warn("KVM-XIVE: CPU %d odd ack CPPR, got %d at %d\n", pr_warn 297 arch/powerpc/kvm/book3s_xive_template.c pr_warn("XIVE: Weird guest interrupt number 0x%08x\n", hirq); pr_warn 170 arch/powerpc/lib/code-patching.c pr_warn("failed to unmap %lx\n", text_poke_addr); pr_warn 205 arch/powerpc/mm/book3s32/mmu.c pr_warn("Kernel _etext not properly aligned\n"); pr_warn 463 arch/powerpc/mm/book3s32/mmu.c pr_warn("KUEP cannot be disabled yet on 6xx when compiled in\n"); pr_warn 473 arch/powerpc/mm/book3s32/mmu.c pr_warn("KUAP cannot be disabled yet on 6xx when compiled in\n"); pr_warn 114 arch/powerpc/mm/book3s64/hash_pgtable.c pr_warn("Outside the supported range\n"); pr_warn 797 arch/powerpc/mm/book3s64/hash_utils.c pr_warn("Outside the supported range\n"); pr_warn 939 arch/powerpc/mm/book3s64/hash_utils.c pr_warn("Outside the supported range\n"); pr_warn 329 arch/powerpc/mm/book3s64/radix_pgtable.c pr_warn("Outside the supported range\n"); pr_warn 871 arch/powerpc/mm/book3s64/radix_pgtable.c pr_warn("Outside the supported range\n"); pr_warn 903 arch/powerpc/mm/book3s64/radix_pgtable.c pr_warn("Outside the supported range\n"); pr_warn 30 arch/powerpc/mm/init-common.c pr_warn("Disabling Kernel Userspace Execution Prevention\n"); pr_warn 38 arch/powerpc/mm/init-common.c pr_warn("Disabling Kernel Userspace Access Protection\n"); pr_warn 132 arch/powerpc/mm/init_32.c pr_warn("Only using first contiguous memory region\n"); pr_warn 229 arch/powerpc/mm/init_64.c pr_warn("%s: Unable to create vmemmap mapping: %d\n", pr_warn 389 arch/powerpc/mm/init_64.c pr_warn("WARNING: Ignoring cmdline option disable_radix\n"); pr_warn 393 arch/powerpc/mm/init_64.c pr_warn("WARNING: Hypervisor doesn't support RADIX with GTSE\n"); pr_warn 48 arch/powerpc/mm/ioremap_32.c pr_warn("%s(): phys addr 0x%llx is RAM lr %ps\n", __func__, pr_warn 20 arch/powerpc/mm/ioremap_64.c pr_warn("Outside the supported range\n"); pr_warn 108 arch/powerpc/mm/ioremap_64.c pr_warn("Attempt to iounmap early bolted mapping at 0x%p\n", addr); pr_warn 140 arch/powerpc/mm/mem.c pr_warn("Unable to create mapping for hot added memory 0x%llx..0x%llx: %d\n", pr_warn 172 arch/powerpc/mm/mem.c pr_warn("Hash collision while resizing HPT\n"); pr_warn 230 arch/powerpc/mm/nohash/8xx.c pr_warn("KUAP cannot be disabled yet on 8xx when compiled in\n"); pr_warn 944 arch/powerpc/mm/numa.c pr_warn("Caution: enabling topology updates\n"); pr_warn 140 arch/powerpc/mm/pgtable_64.c pr_warn("Warning: Unable to mark rodata read only on this CPU.\n"); pr_warn 412 arch/powerpc/mm/ptdump/ptdump.c pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found\n", pr_warn 253 arch/powerpc/perf/hv-24x7.c pr_warn("desc len not aligned %p", dl_); pr_warn 268 arch/powerpc/perf/hv-24x7.c pr_warn("long desc len not aligned %p", ldl_); pr_warn 456 arch/powerpc/perf/hv-24x7.c pr_warn("catalog event %u has invalid domain %u\n", pr_warn 645 arch/powerpc/perf/hv-24x7.c pr_warn("event %zu fixed portion is not within range\n", pr_warn 658 arch/powerpc/perf/hv-24x7.c pr_warn("event %zu has .length=%zu, ends after buffer end: ev_end=%pK > end=%pK, offset=%zu\n", pr_warn 666 arch/powerpc/perf/hv-24x7.c pr_warn("event %zu has a calculated length which exceeds buffer length %zu: event=%pK end=%pK, offset=%zu\n", pr_warn 673 arch/powerpc/perf/hv-24x7.c pr_warn("event %zu exceeds it's own length: event=%pK, end=%pK, offset=%zu, calc_ev_end=%pK\n", pr_warn 830 arch/powerpc/perf/hv-24x7.c pr_warn("event buffer ended before listed # of events were parsed (got %zu, wanted %zu, junk %zu)\n", pr_warn 876 arch/powerpc/perf/hv-24x7.c pr_warn("event %zu (%.*s) creation failure, skipping\n", pr_warn 453 arch/powerpc/platforms/512x/clock-commonclk.c pr_warn("calc rate %d != OF spec %d\n", pr_warn 160 arch/powerpc/platforms/512x/mpc512x_shared.c pr_warn("DIU pixclock auto search unsuccessful\n"); pr_warn 168 arch/powerpc/platforms/512x/mpc512x_shared.c pr_warn("DIU pixclock best effort fallback (backend's choice)\n"); pr_warn 386 arch/powerpc/platforms/512x/mpc512x_shared.c pr_warn("no %s property in %pOF node, defaulting to %d\n", pr_warn 376 arch/powerpc/platforms/52xx/mpc52xx_pic.c pr_warn("%s: Critical IRQ #%d is unsupported! Nopping it.\n", pr_warn 57 arch/powerpc/platforms/83xx/km83xx.c pr_warn("%s couldn;t find par_io node\n", __func__); pr_warn 63 arch/powerpc/platforms/83xx/km83xx.c pr_warn("%s couldn;t map par_io registers\n", __func__); pr_warn 250 arch/powerpc/platforms/85xx/socrates_fpga_pic.c pr_warn("FPGA PIC: invalid irq type, setting default active low\n"); pr_warn 264 arch/powerpc/platforms/85xx/socrates_fpga_pic.c pr_warn("FPGA PIC: invalid irq routing\n"); pr_warn 290 arch/powerpc/platforms/85xx/socrates_fpga_pic.c pr_warn("FPGA PIC: can't get irq%d\n", i); pr_warn 100 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c pr_warn("WARNING: your dts/dtb is old. You must update before the next kernel release.\n"); pr_warn 69 arch/powerpc/platforms/86xx/mvme7100.c pr_warn("Unable to map board registers\n"); pr_warn 77 arch/powerpc/platforms/embedded6xx/mvme5100.c pr_warn("mvme5100_pic_init: couldn't find i8259\n"); pr_warn 83 arch/powerpc/platforms/embedded6xx/mvme5100.c pr_warn("mvme5100_pic_init: no cascade interrupt?\n"); pr_warn 520 arch/powerpc/platforms/pasemi/dma_lib.c pr_warn("Can't find I/O Bridge\n"); pr_warn 529 arch/powerpc/platforms/pasemi/dma_lib.c pr_warn("Can't find DMA controller\n"); pr_warn 578 arch/powerpc/platforms/pasemi/dma_lib.c pr_warn("Warning: Could not disable RX section\n"); pr_warn 587 arch/powerpc/platforms/pasemi/dma_lib.c pr_warn("Warning: Could not disable TX section\n"); pr_warn 68 arch/powerpc/platforms/pasemi/idle.c pr_warn("No cpufreq driver, powersavings modes disabled\n"); pr_warn 68 arch/powerpc/platforms/pasemi/misc.c pr_warn("pasemi_register_i2c_devices: invalid i2c device entry\n"); pr_warn 61 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: OPAL is required !\n", pr_warn 510 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Invalid option %d\n", __func__, option); pr_warn 523 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n", pr_warn 538 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Failure %lld enable %d for PHB#%x-PE#%x\n", pr_warn 567 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Failure %lld getting PHB#%x diag-data\n", pr_warn 585 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Failure %lld getting PHB#%x state\n", pr_warn 645 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Failure %lld getting PHB#%x-PE%x state\n", pr_warn 682 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Invalid PHB#%x-PE#%x state %x\n", pr_warn 967 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Pending transaction while issuing %sFLR to %04x:%02x:%02x.%01x\n", pr_warn 1117 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Failure %lld clearing error injection registers\n", pr_warn 1219 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Invalid error type %d\n", pr_warn 1226 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Invalid error function %d\n", pr_warn 1233 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Firmware doesn't support error injection\n", pr_warn 1242 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Failure %lld injecting error " pr_warn 1331 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Failed to get HUB#%llx diag-data (%ld)\n", pr_warn 1375 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Invalid type of HUB#%llx diag-data (%d)\n", pr_warn 1580 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Unexpected error type %d\n", pr_warn 1669 arch/powerpc/platforms/powernv/eeh-powernv.c pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n", pr_warn 1145 arch/powerpc/platforms/powernv/idle.c pr_warn("cpuidle-powernv: No suitable default stop state found. Disabling platform idle.\n"); pr_warn 1153 arch/powerpc/platforms/powernv/idle.c pr_warn("cpuidle-powernv: No suitable stop state for CPU-Hotplug. Offlined CPUs will busy wait"); pr_warn 1175 arch/powerpc/platforms/powernv/idle.c pr_warn("cpuidle-powernv: Disabling idle states that lose full context\n"); pr_warn 1176 arch/powerpc/platforms/powernv/idle.c pr_warn("cpuidle-powernv: Idle power-savings, CPU-Hotplug affected\n"); pr_warn 1187 arch/powerpc/platforms/powernv/idle.c pr_warn("cpuidle-powernv: Offlined CPUs will stop with psscr = 0x%016llx\n", pr_warn 1191 arch/powerpc/platforms/powernv/idle.c pr_warn("cpuidle-powernv: Offlined CPUs will busy wait\n"); pr_warn 1204 arch/powerpc/platforms/powernv/idle.c pr_warn("cpuidle-powernv: no idle states found in the DT\n"); pr_warn 1232 arch/powerpc/platforms/powernv/idle.c pr_warn("opal: PowerMgmt Node not found\n"); pr_warn 1253 arch/powerpc/platforms/powernv/idle.c pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-flags in DT\n"); pr_warn 1263 arch/powerpc/platforms/powernv/idle.c pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-latencies-ns in DT\n"); pr_warn 1273 arch/powerpc/platforms/powernv/idle.c pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-latencies-ns in DT\n"); pr_warn 1285 arch/powerpc/platforms/powernv/idle.c pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-psscr in DT\n"); pr_warn 1295 arch/powerpc/platforms/powernv/idle.c pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-psscr-mask in DT\n"); pr_warn 1311 arch/powerpc/platforms/powernv/idle.c pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-names in DT\n"); pr_warn 348 arch/powerpc/platforms/powernv/opal-core.c pr_warn("WARNING: Failed to read OPAL base & entry values\n"); pr_warn 463 arch/powerpc/platforms/powernv/opal-core.c pr_warn("Support missing for this f/w version!\n"); pr_warn 503 arch/powerpc/platforms/powernv/opal-core.c pr_warn("Supported OPAL metadata version: %u, found: %u!\n", pr_warn 505 arch/powerpc/platforms/powernv/opal-core.c pr_warn("WARNING: F/W using newer OPAL metadata format!!\n"); pr_warn 511 arch/powerpc/platforms/powernv/opal-core.c pr_warn("WARNING: OPAL regions count (%d) adjusted to limit (%d)", pr_warn 532 arch/powerpc/platforms/powernv/opal-core.c pr_warn("Supported CPU data version: %u, found: %u!\n", pr_warn 534 arch/powerpc/platforms/powernv/opal-core.c pr_warn("WARNING: F/W using newer CPU state data format!!\n"); pr_warn 630 arch/powerpc/platforms/powernv/opal-core.c pr_warn("unable to create sysfs file fadump_release_opalcore (%d)\n", pr_warn 81 arch/powerpc/platforms/powernv/opal-dump.c pr_warn("%s: Failed to send ack to Dump ID 0x%x (%d)\n", pr_warn 121 arch/powerpc/platforms/powernv/opal-dump.c pr_warn("%s: Failed to initiate FSP dump (%d)\n", pr_warn 225 arch/powerpc/platforms/powernv/opal-dump.c pr_warn("%s: Failed to get dump info (%d)\n", pr_warn 272 arch/powerpc/platforms/powernv/opal-dump.c pr_warn("%s: Extract dump failed for ID 0x%x\n", pr_warn 406 arch/powerpc/platforms/powernv/opal-dump.c pr_warn("%s: Failed to create dump kset\n", __func__); pr_warn 412 arch/powerpc/platforms/powernv/opal-dump.c pr_warn("%s: Failed to create initiate dump attr group\n", pr_warn 291 arch/powerpc/platforms/powernv/opal-elog.c pr_warn("%s: failed to create elog kset\n", __func__); pr_warn 159 arch/powerpc/platforms/powernv/opal-fadump.c pr_warn("Not all memory regions were saved!!!\n"); pr_warn 160 arch/powerpc/platforms/powernv/opal-fadump.c pr_warn(" Unsaved memory regions:\n"); pr_warn 163 arch/powerpc/platforms/powernv/opal-fadump.c pr_warn("\t[%03d] base: 0x%llx, size: 0x%llx\n", pr_warn 168 arch/powerpc/platforms/powernv/opal-fadump.c pr_warn("If the unsaved regions only contain pages that are filtered out (eg. free/user pages), the vmcore should still be usable.\n"); pr_warn 169 arch/powerpc/platforms/powernv/opal-fadump.c pr_warn("WARNING: If the unsaved regions contain kernel pages, the vmcore will be corrupted.\n"); pr_warn 293 arch/powerpc/platforms/powernv/opal-fadump.c pr_warn("%d regions could not be registered for MPIPL as MAX limit is reached!\n", pr_warn 357 arch/powerpc/platforms/powernv/opal-fadump.c pr_warn("Could not reset (%llu) kernel metadata tag!\n", ret); pr_warn 379 arch/powerpc/platforms/powernv/opal-fadump.c pr_warn("Supported CPU state data version: %u, found: %d!\n", pr_warn 382 arch/powerpc/platforms/powernv/opal-fadump.c pr_warn("WARNING: F/W using newer CPU state data format!!\n"); pr_warn 501 arch/powerpc/platforms/powernv/opal-fadump.c pr_warn("WARNING: appending only crashing CPU's register data\n"); pr_warn 694 arch/powerpc/platforms/powernv/opal-fadump.c pr_warn("Supported kernel metadata version: %u, found: %d!\n", pr_warn 696 arch/powerpc/platforms/powernv/opal-fadump.c pr_warn("WARNING: Kernel metadata format mismatch identified! Core file maybe corrupted..\n"); pr_warn 392 arch/powerpc/platforms/powernv/opal-flash.c pr_warn("FLASH: Invalid candidate image\n"); pr_warn 401 arch/powerpc/platforms/powernv/opal-flash.c pr_warn("FLASH: Too large image\n"); pr_warn 405 arch/powerpc/platforms/powernv/opal-flash.c pr_warn("FLASH: Image is shorter than expected\n"); pr_warn 532 arch/powerpc/platforms/powernv/opal-flash.c pr_warn("FLASH: opal kobject is not available\n"); pr_warn 539 arch/powerpc/platforms/powernv/opal-flash.c pr_warn("FLASH: Failed to create sysfs files\n"); pr_warn 545 arch/powerpc/platforms/powernv/opal-flash.c pr_warn("FLASH: Failed to create sysfs files\n"); pr_warn 266 arch/powerpc/platforms/powernv/opal-imc.c pr_warn("IMC Device without type property\n"); pr_warn 291 arch/powerpc/platforms/powernv/opal-imc.c pr_warn("IMC Unknown Device type \n"); pr_warn 185 arch/powerpc/platforms/powernv/opal-irqchip.c pr_warn("opal: Node not found\n"); pr_warn 201 arch/powerpc/platforms/powernv/opal-irqchip.c pr_warn("opal: Unable to create irq domain\n"); pr_warn 251 arch/powerpc/platforms/powernv/opal-irqchip.c pr_warn("Failed to map OPAL irq 0x%x\n", hw_irq); pr_warn 285 arch/powerpc/platforms/powernv/opal-irqchip.c pr_warn("Error %d requesting OPAL irq %d\n", rc, (int)r->start); pr_warn 112 arch/powerpc/platforms/powernv/opal-msglog.c pr_warn("%s property not found, no message log\n", pr_warn 119 arch/powerpc/platforms/powernv/opal-msglog.c pr_warn("memory console address is invalid\n"); pr_warn 124 arch/powerpc/platforms/powernv/opal-msglog.c pr_warn("memory console version is invalid\n"); pr_warn 143 arch/powerpc/platforms/powernv/opal-msglog.c pr_warn("OPAL: memcons failed to load from ibm,opal-memcons\n"); pr_warn 153 arch/powerpc/platforms/powernv/opal-msglog.c pr_warn("OPAL: message log initialisation failed, not creating sysfs entry\n"); pr_warn 158 arch/powerpc/platforms/powernv/opal-msglog.c pr_warn("OPAL: sysfs file creation failed\n"); pr_warn 160 arch/powerpc/platforms/powernv/opal-powercap.c pr_warn("Failed to create powercap kobject\n"); pr_warn 223 arch/powerpc/platforms/powernv/opal-powercap.c pr_warn("Failed to create powercap attribute group %s\n", pr_warn 242 arch/powerpc/platforms/powernv/opal-prd.c pr_warn("write: opal_prd_msg returned %d\n", rc); pr_warn 142 arch/powerpc/platforms/powernv/opal-psr.c pr_warn("Failed to create psr kobject\n"); pr_warn 177 arch/powerpc/platforms/powernv/opal-sensor-groups.c pr_warn("Failed to create sensor group kobject\n"); pr_warn 208 arch/powerpc/platforms/powernv/opal-sensor-groups.c pr_warn("sensor-group-id property not found\n"); pr_warn 219 arch/powerpc/platforms/powernv/opal-sensor-groups.c pr_warn("Failed to create sensor attribute group %s\n", pr_warn 152 arch/powerpc/platforms/powernv/opal-sysparam.c pr_warn("SYSPARAM: opal kobject is not available\n"); pr_warn 235 arch/powerpc/platforms/powernv/opal-sysparam.c pr_warn("SYSPARAM: Not creating parameter %d as size " pr_warn 248 arch/powerpc/platforms/powernv/opal.c pr_warn("%s: Invalid arguments, msg_type:%d\n", pr_warn 285 arch/powerpc/platforms/powernv/opal.c pr_warn("%s: Failed to retrieve opal message, err=%lld\n", pr_warn 404 arch/powerpc/platforms/powernv/opal.c pr_warn("atomic console write returned partial " pr_warn 704 arch/powerpc/platforms/powernv/opal.c pr_warn("kobject_create_and_add opal failed\n"); pr_warn 744 arch/powerpc/platforms/powernv/opal.c pr_warn("Error %d creating OPAL symbols file\n", rc); pr_warn 778 arch/powerpc/platforms/powernv/opal.c pr_warn("kobject_create_and_add() of exports failed\n"); pr_warn 792 arch/powerpc/platforms/powernv/opal.c pr_warn("Failed kmalloc for bin_attribute!"); pr_warn 804 arch/powerpc/platforms/powernv/opal.c pr_warn("Failed kstrdup for bin_attribute attr.name"); pr_warn 811 arch/powerpc/platforms/powernv/opal.c pr_warn("Error %d creating OPAL sysfs exports/%s file\n", pr_warn 845 arch/powerpc/platforms/powernv/opal.c pr_warn("DUMP: Failed to register kernel log buffer. " pr_warn 911 arch/powerpc/platforms/powernv/opal.c pr_warn("Device node not found\n"); pr_warn 1137 arch/powerpc/platforms/powernv/opal.c pr_warn("%s: Unable to set nest mmu ptcr\n", __func__); pr_warn 152 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: Error %lld unfreezing PHB#%x-PE#%x\n", pr_warn 161 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: Invalid PE %x on PHB#%x\n", pr_warn 236 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn(" Cannot strip M64 segment for reserved PE#%x\n", pr_warn 242 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn(" Failure %lld %s M64 BAR#%d\n", pr_warn 298 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn(" Error %lld setting M64 PHB#%x-BAR#%d\n", pr_warn 307 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn(" Error %lld enabling M64 PHB#%x-BAR#%d\n", pr_warn 367 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: Out of memory !\n", pr_warn 421 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: Error %lld mapping M64 for PHB#%x-PE#%x\n", pr_warn 469 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: Limiting M64 range to 63 (from %d) on PHB#%x\n", pr_warn 475 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: M64 empty, disabling M64 usage on PHB#%x\n", pr_warn 541 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n", pr_warn 555 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n", pr_warn 577 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: Failure %lld clear %d on PHB#%x-PE#%x\n", pr_warn 591 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: Failure %lld clear %d on PHB#%x-PE#%x\n", pr_warn 627 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: Failure %lld getting " pr_warn 645 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: Failure %lld getting " pr_warn 1060 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: Not enough PE# available, disabling device\n", pr_warn 1105 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: No device node associated with device !\n", pr_warn 1163 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: Not enough PE# available for PCI bus %04x:%02x\n", pr_warn 2823 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: OPAL error %d setting XIVE %d PE\n", pr_warn 2834 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: OPAL error %d getting 64-bit MSI data\n", pr_warn 2846 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: OPAL error %d getting 32-bit MSI data\n", pr_warn 3142 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: Error on creating debugfs on PHB#%x\n", pr_warn 3348 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn("%s: No DMA for PHB#%x (type %d)\n", pr_warn 3710 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn(" Broken <bus-range> on %pOF\n", np); pr_warn 3908 arch/powerpc/platforms/powernv/pci-ioda.c pr_warn(" OPAL Error %ld performing IODA table reset !\n", rc); pr_warn 177 arch/powerpc/platforms/powernv/pci.c pr_warn("%s: Supports only 64-bit MSIs\n", pr_warn 183 arch/powerpc/platforms/powernv/pci.c pr_warn("%s: Failed to find a free MSI\n", pr_warn 189 arch/powerpc/platforms/powernv/pci.c pr_warn("%s: Failed to map MSI to linux irq\n", pr_warn 197 arch/powerpc/platforms/powernv/pci.c pr_warn("%s: Failed to setup MSI\n", pci_name(pdev)); pr_warn 549 arch/powerpc/platforms/powernv/pci.c pr_warn("%s: Unrecognized ioType %d\n", pr_warn 576 arch/powerpc/platforms/powernv/pci.c pr_warn("%s: Failure %ld clearing frozen " pr_warn 627 arch/powerpc/platforms/powernv/pci.c pr_warn("%s: Failure %lld getting PHB#%x-PE#%x state\n", pr_warn 98 arch/powerpc/platforms/powernv/rng.c pr_warn("Unable to use DARN for get_random_seed()\n"); pr_warn 124 arch/powerpc/platforms/powernv/rng.c pr_warn("No ibm,chip-id found for %pOF.\n", dn); pr_warn 91 arch/powerpc/platforms/powernv/smp.c pr_warn("OPAL Error %ld querying CPU %d state\n", rc, nr); pr_warn 109 arch/powerpc/platforms/powernv/smp.c pr_warn("OPAL Error %ld starting CPU %d\n", rc, nr); pr_warn 652 arch/powerpc/platforms/ps3/device-init.c pr_warn("%s:%u: device %llu:%llu not found\n", pr_warn 848 arch/powerpc/platforms/ps3/device-init.c pr_warn("%s:%u: bad notify_event: event %llu, dev_id %llu, dev_type %llu\n", pr_warn 596 arch/powerpc/platforms/ps3/mm.c pr_warn("%s:%d: lv1_put_iopte failed: %s\n", pr_warn 690 arch/powerpc/platforms/ps3/os-area.c pr_warn("%s: Could not update FLASH ROM\n", __func__); pr_warn 126 arch/powerpc/platforms/ps3/repository.c pr_warn("%s:%d: lv1_read_repository_node failed: %s\n", pr_warn 403 arch/powerpc/platforms/pseries/eeh_pseries.c pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n", pr_warn 416 arch/powerpc/platforms/pseries/eeh_pseries.c pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n", pr_warn 628 arch/powerpc/platforms/pseries/eeh_pseries.c pr_warn("%s: Unable to configure bridge PHB#%x-PE#%x (%d)\n", pr_warn 677 arch/powerpc/platforms/pseries/eeh_pseries.c pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n", pr_warn 704 arch/powerpc/platforms/pseries/eeh_pseries.c pr_warn("%s: Failed to allow unfreeze for PHB#%x-PE#%lx, rc=%x\n", pr_warn 440 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Failed to find CPU root node \"/cpus\"\n"); pr_warn 446 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("CPU with drc index %x already exists\n", drc_index); pr_warn 452 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Cannot find CPU (drc index %x) to add.\n", drc_index); pr_warn 458 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Failed to acquire DRC, rc: %d, drc index: %x\n", pr_warn 466 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Failed call to configure-connector, drc index: %x\n", pr_warn 480 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Failed to attach node %pOFn, rc: %d, drc index: %x\n", pr_warn 493 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Failed to online cpu %pOFn, rc: %d, drc index: %x\n", pr_warn 574 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Failed to offline CPU %pOFn, rc: %d\n", dn, rc); pr_warn 580 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Failed to release drc (%x) for CPU %pOFn, rc: %d\n", pr_warn 590 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Failed to detach CPU %pOFn, rc: %d", dn, rc); pr_warn 628 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Cannot find CPU (drc index %x) to remove\n", pr_warn 661 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Error occurred getting drc-index for %pOFn\n", pr_warn 669 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Failed to find enough CPUs (%d of %d) to remove\n", pr_warn 672 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Cannot remove all CPUs\n"); pr_warn 706 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("CPU hot-remove failed, adding back removed CPUs\n"); pr_warn 728 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Could not find CPU root node in device tree\n"); pr_warn 772 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("Failed to find enough CPUs (%d of %d) to add\n", pr_warn 787 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_warn("CPU hot-add failed, removing any added CPUs\n"); pr_warn 795 arch/powerpc/platforms/pseries/iommu.c pr_warn("%pOF failed to clear tces in window.\n", pr_warn 803 arch/powerpc/platforms/pseries/iommu.c pr_warn("%pOF: failed to remove direct window: rtas returned " pr_warn 815 arch/powerpc/platforms/pseries/iommu.c pr_warn("%pOF: failed to remove direct window property: %d\n", pr_warn 93 arch/powerpc/platforms/pseries/lpar.c pr_warn("Failed to allocate dispatch trace log for cpu %d\n", pr_warn 96 arch/powerpc/platforms/pseries/lpar.c pr_warn("Stolen time statistics will be unreliable\n"); pr_warn 1030 arch/powerpc/platforms/pseries/lpar.c pr_warn("Unexpected empty call to H_BLOCK_REMOVE"); pr_warn 1437 arch/powerpc/platforms/pseries/lpar.c pr_warn("%s %s Error calling get-system-parameter (0x%x)\n", pr_warn 1448 arch/powerpc/platforms/pseries/lpar.c pr_warn("%s too large returned buffer %d", __func__, len); pr_warn 1609 arch/powerpc/platforms/pseries/lpar.c pr_warn("Unexpected error %d cancelling timed out HPT resize\n", pr_warn 1623 arch/powerpc/platforms/pseries/lpar.c pr_warn("Invalid argument from H_RESIZE_HPT_PREPARE\n"); pr_warn 1626 arch/powerpc/platforms/pseries/lpar.c pr_warn("Operation not permitted from H_RESIZE_HPT_PREPARE\n"); pr_warn 1629 arch/powerpc/platforms/pseries/lpar.c pr_warn("Unexpected error %d from H_RESIZE_HPT_PREPARE\n", rc); pr_warn 1646 arch/powerpc/platforms/pseries/lpar.c pr_warn("Unexpected error %d from H_RESIZE_HPT_COMMIT\n", pr_warn 2002 arch/powerpc/platforms/pseries/lpar.c pr_warn("%s: can't create vpa root dir\n", __func__); pr_warn 2015 arch/powerpc/platforms/pseries/lpar.c pr_warn("%s: can't create per-cpu vpa file\n", pr_warn 311 arch/powerpc/platforms/pseries/setup.c pr_warn("Failed to create dispatch trace log buffer cache\n"); pr_warn 312 arch/powerpc/platforms/pseries/setup.c pr_warn("Stolen time statistics will be unreliable\n"); pr_warn 364 arch/powerpc/platforms/pseries/setup.c pr_warn("Unable to enable relocation" pr_warn 373 arch/powerpc/platforms/pseries/setup.c pr_warn("Warning: Giving up waiting to enable " pr_warn 395 arch/powerpc/platforms/pseries/setup.c pr_warn("Warning: Failed to disable relocation on exceptions: %ld\n", pr_warn 169 arch/powerpc/platforms/pseries/suspend.c pr_warn("%s: Could not restore CPUs to offline " pr_warn 1347 arch/powerpc/platforms/pseries/vio.c pr_warn("%s: parent(%pOF) of %pOFn not recognized.\n", pr_warn 1356 arch/powerpc/platforms/pseries/vio.c pr_warn("%s: could not determine the parent of node %pOFn.\n", pr_warn 1372 arch/powerpc/platforms/pseries/vio.c pr_warn("%s: allocation failure for VIO device.\n", __func__); pr_warn 1383 arch/powerpc/platforms/pseries/vio.c pr_warn("%s: node %pOFn is missing the 'device_type' " pr_warn 1390 arch/powerpc/platforms/pseries/vio.c pr_warn("%s: node %pOFn missing 'reg'\n", pr_warn 522 arch/powerpc/sysdev/fsl_msi.c pr_warn("%s: %pOF: msi available range of %u at %u is not IRQ-aligned\n", pr_warn 339 arch/powerpc/sysdev/fsl_pci.c pr_warn("%pOF: msi-address-64 address of %llx is " pr_warn 448 arch/powerpc/sysdev/fsl_pci.c pr_warn("%pOF: WARNING: Outbound window cfg leaves " pr_warn 531 arch/powerpc/sysdev/fsl_pci.c pr_warn("%pOF: disabled\n", dev); pr_warn 808 arch/powerpc/sysdev/fsl_pci.c pr_warn("%pOF: disabled by the firmware.\n", pr_warn 100 arch/powerpc/sysdev/fsl_rcpm.c pr_warn("Unknown cpu PM state (%d)\n", state); pr_warn 125 arch/powerpc/sysdev/fsl_rcpm.c pr_warn("Unknown cpu PM state (%d)\n", state); pr_warn 177 arch/powerpc/sysdev/fsl_rcpm.c pr_warn("Unknown cpu PM state (%d)\n", state); pr_warn 207 arch/powerpc/sysdev/fsl_rcpm.c pr_warn("Unknown cpu PM state (%d)\n", state); pr_warn 236 arch/powerpc/sysdev/fsl_rcpm.c pr_warn("Unknown platform PM state (%d)", state); pr_warn 267 arch/powerpc/sysdev/fsl_rcpm.c pr_warn("Unknown platform PM state (%d)\n", state); pr_warn 1011 arch/powerpc/sysdev/mpic.c pr_warn("mpic: Mapping of source 0x%x failed, source protected by firmware !\n", pr_warn 1042 arch/powerpc/sysdev/mpic.c pr_warn("mpic: Mapping of source 0x%x failed, source out of range !\n", pr_warn 239 arch/powerpc/sysdev/xics/icp-native.c pr_warn("icp_native: Could not reserve ICP MMIO for CPU %d, interrupt server #0x%x\n", pr_warn 247 arch/powerpc/sysdev/xics/icp-native.c pr_warn("icp_native: Failed ioremap for CPU %d, interrupt server #0x%x, addr %#lx\n", pr_warn 130 arch/powerpc/sysdev/xics/ics-opal.c pr_warn("%s: No online cpus in the mask %*pb for irq %d\n", pr_warn 144 arch/powerpc/sysdev/xics/ics-rtas.c pr_warn("%s: No online cpus in the mask %*pb for irq %d\n", pr_warn 241 arch/powerpc/sysdev/xics/xics-common.c pr_warn("IRQ %u affinity broken off cpu %u\n", pr_warn 465 arch/powerpc/sysdev/xics/xics-common.c pr_warn("XICS: Cannot find a Presentation Controller !\n"); pr_warn 480 arch/powerpc/sysdev/xics/xics-common.c pr_warn("XICS: Cannot find a Source Controller !\n"); pr_warn 618 arch/powerpc/sysdev/xive/common.c pr_warn("irq %d started with broken affinity\n", d->irq); pr_warn 811 arch/powerpc/sysdev/xive/common.c pr_warn("Interrupt %d (HW 0x%x) type mismatch, Linux says %s, FW says %s\n", pr_warn 697 arch/powerpc/sysdev/xive/native.c pr_warn("OPAL error %lld freeing VP block\n", rc); pr_warn 763 arch/powerpc/sysdev/xive/spapr.c pr_warn("WARNING: Ignoring cmdline option xive=off\n"); pr_warn 766 arch/powerpc/sysdev/xive/spapr.c pr_warn("%s: Unknown xive support option: 0x%x\n", pr_warn 21 arch/riscv/kernel/cpu.c pr_warn("Found incompatible CPU\n"); pr_warn 26 arch/riscv/kernel/cpu.c pr_warn("Found CPU without hart ID\n"); pr_warn 36 arch/riscv/kernel/cpu.c pr_warn("CPU with hartid=%d has no \"riscv,isa\" property\n", hart); pr_warn 40 arch/riscv/kernel/cpu.c pr_warn("CPU with hartid=%d has an invalid ISA of \"%s\"\n", hart, isa); pr_warn 43 arch/riscv/kernel/cpufeature.c pr_warn("Unable to find \"riscv,isa\" devicetree entry\n"); pr_warn 89 arch/riscv/kernel/perf_callchain.c pr_warn("RISC-V does not support perf in guest mode!"); pr_warn 395 arch/riscv/kernel/perf_event.c pr_warn("PMC hardware not available\n"); pr_warn 203 arch/riscv/kernel/smp.c pr_warn("SMP: failed to stop secondary CPUs %*pbl\n", pr_warn 78 arch/riscv/kernel/smpboot.c pr_warn("Invalid cpuid [%d] for hartid [%d]\n", pr_warn 90 arch/riscv/kernel/smpboot.c pr_warn("Total number of cpus [%d] is greater than nr_cpus option value [%d]\n", pr_warn 95 arch/s390/kernel/cpcmd.c pr_warn("The cpcmd kernel function failed to allocate a response buffer\n"); pr_warn 677 arch/s390/kernel/debug.c pr_warn("Root becomes the owner of all s390dbf files in sysfs\n"); pr_warn 1307 arch/s390/kernel/debug.c pr_warn("%s is not a valid level for a debug feature\n", str); pr_warn 65 arch/s390/kernel/perf_cpum_cf_common.c pr_warn("CPU[%i] MT counter data was lost\n", pr_warn 820 arch/s390/kernel/perf_cpum_sf.c pr_warn("CPU Measurement Facility sampling is temporarily not available\n"); pr_warn 525 arch/s390/kernel/time.c pr_warn("The real or virtual hardware system does not provide an STP interface\n"); pr_warn 4556 arch/s390/kvm/kvm-s390.c pr_warn("failed to commit memory region\n"); pr_warn 192 arch/s390/mm/extmem.c pr_warn("Querying a DCSS type failed with rc=%ld\n", vmrc); pr_warn 357 arch/s390/mm/extmem.c pr_warn("Loading DCSS %s failed with rc=%ld\n", name, end_addr); pr_warn 473 arch/s390/mm/extmem.c pr_warn("DCSS %s is in use and cannot be reloaded\n", name); pr_warn 486 arch/s390/mm/extmem.c pr_warn("DCSS %s overlaps with used memory resources and cannot be reloaded\n", pr_warn 505 arch/s390/mm/extmem.c pr_warn("Reloading DCSS %s failed with rc=%ld\n", pr_warn 483 arch/s390/numa/mode_emu.c pr_warn("Increasing memory stripe size from %ld MB to %ld MB\n", pr_warn 499 arch/s390/numa/mode_emu.c pr_warn("Not enough memory for %d nodes, reducing node count\n", nodes); pr_warn 109 arch/sparc/kernel/adi_64.c pr_warn("WARNING: ADI tag size >4 on this platform. Disabling AADI support\n"); pr_warn 296 arch/sparc/kernel/irq_64.c pr_warn("IRQ pre handler NOT supported.\n"); pr_warn 446 arch/sparc/kernel/leon_kernel.c pr_warn("GPTIMER uses shared irqs, using other timers of the same core will fail.\n"); pr_warn 288 arch/sparc/kernel/nmi.c pr_warn("NMI watchdog cannot be enabled or disabled\n"); pr_warn 397 arch/sparc/kernel/prom_64.c pr_warn("CPU node missing reg property\n"); pr_warn 410 arch/sparc/kernel/prom_64.c pr_warn("CPU node missing cpu ID property\n"); pr_warn 1377 arch/sparc/mm/init_64.c pr_warn("Returning default NUMA distance value for %d->%d\n", pr_warn 3082 arch/sparc/mm/init_64.c pr_warn("Failed to allocate source.\n"); pr_warn 3092 arch/sparc/mm/init_64.c pr_warn("Resource insertion failed.\n"); pr_warn 327 arch/sparc/vdso/vma.c pr_warn("Cannot allocate vdso\n"); pr_warn 36 arch/x86/entry/vdso/vdso32-setup.c pr_warn("vdso32 values other than 0 and 1 are no longer allowed; vdso disabled\n"); pr_warn 938 arch/x86/events/amd/ibs.c pr_warn("perf: IBS APIC setup failed on cpu #%d\n", pr_warn 443 arch/x86/events/amd/iommu.c pr_warn("Error initializing IOMMU %d.\n", idx); pr_warn 290 arch/x86/events/amd/power.c pr_warn("AMD Power PMU registration failed\n"); pr_warn 3984 arch/x86/events/intel/core.c pr_warn("PEBS disabled due to CPU errata\n"); pr_warn 4144 arch/x86/events/intel/core.c pr_warn("CPUID marked event: \'%s\' unavailable\n", pr_warn 241 arch/x86/events/intel/p6.c pr_warn("Userspace RDPMC support disabled due to a CPU erratum\n"); pr_warn 1593 arch/x86/events/intel/pt.c pr_warn("PT is enabled at boot time, doing nothing\n"); pr_warn 1603 arch/x86/events/intel/pt.c pr_warn("ToPA output is not supported on this CPU\n"); pr_warn 164 arch/x86/events/intel/rapl.c pr_warn("Invalid domain %d, failed to scale data\n", cfg); pr_warn 790 arch/x86/events/intel/rapl.c pr_warn("Initialization failed (%d), disabled\n", ret); pr_warn 163 arch/x86/hyperv/hv_init.c pr_warn("Hyper-V: reenlightenment support is unavailable\n"); pr_warn 118 arch/x86/include/asm/set_memory.h pr_warn("Could not invalidate pfn=0x%lx from 1:1 map\n", pfn); pr_warn 215 arch/x86/kernel/acpi/boot.c pr_warn(PREFIX "x2apic entry ignored\n"); pr_warn 346 arch/x86/kernel/acpi/boot.c pr_warn("Invalid bus_irq %u for legacy override\n", bus_irq); pr_warn 415 arch/x86/kernel/acpi/boot.c pr_warn("Failed to find ioapic for gsi : %u\n", gsi); pr_warn 119 arch/x86/kernel/acpi/cstate.c pr_warn(FW_BUG "ACPI MWAIT C-state 0x%x not supported by HW (0x%x)\n", pr_warn 142 arch/x86/kernel/amd_nb.c pr_warn("Error programming SMN address 0x%x.\n", address); pr_warn 149 arch/x86/kernel/amd_nb.c pr_warn("Error %s SMN address 0x%x.\n", pr_warn 203 arch/x86/kernel/amd_nb.c pr_warn("Error writing DF Indirect FICAA, FICAA=0x%x\n", ficaa); pr_warn 209 arch/x86/kernel/amd_nb.c pr_warn("Error reading DF Indirect FICAD LO, FICAA=0x%x.\n", ficaa); pr_warn 1589 arch/x86/kernel/apic/apic.c pr_warn("APIC: Stale IRR: %256pb ISR: %256pb\n", irr.map, isr.map); pr_warn 2912 arch/x86/kernel/apic/apic.c pr_warn("Unknown external NMI delivery mode `%s' ignored\n", arg); pr_warn 815 arch/x86/kernel/apic/io_apic.c pr_warn("IOAPIC: Invalid polarity: 2, defaulting to low\n"); pr_warn 833 arch/x86/kernel/apic/io_apic.c pr_warn("IOAPIC: Invalid srcbus: %d defaulting to level\n", bus); pr_warn 863 arch/x86/kernel/apic/io_apic.c pr_warn("IOAPIC: Invalid trigger mode 2 defaulting to level\n"); pr_warn 2767 arch/x86/kernel/apic/io_apic.c pr_warn("I/O APIC 0x%x registers return all ones, skipping!\n", pr_warn 2802 arch/x86/kernel/apic/io_apic.c pr_warn("Bogus (zero) I/O APIC address found, skipping!\n"); pr_warn 2807 arch/x86/kernel/apic/io_apic.c pr_warn("address 0x%x conflicts with IOAPIC%d\n", pr_warn 2814 arch/x86/kernel/apic/io_apic.c pr_warn("Max # of I/O APICs (%d) exceeded (found %d), skipping\n", pr_warn 2844 arch/x86/kernel/apic/io_apic.c pr_warn("GSI range [%u-%u] for new IOAPIC conflicts with GSI[%u-%u]\n", pr_warn 2898 arch/x86/kernel/apic/io_apic.c pr_warn("can't find IOAPIC for GSI %d\n", gsi_base); pr_warn 2910 arch/x86/kernel/apic/io_apic.c pr_warn("pin%d on IOAPIC%d is still in use.\n", pr_warn 268 arch/x86/kernel/apic/msi.c pr_warn("failed to initialize irqdomain for MSI/MSI-x.\n"); pr_warn 408 arch/x86/kernel/apic/vector.c pr_warn("irq %u: Affinity broken due to vector space exhaustion.\n", pr_warn 1015 arch/x86/kernel/apic/vector.c pr_warn("IRQ fixup: irq %d move in progress, old vector %d\n", pr_warn 1037 arch/x86/kernel/apic/vector.c pr_warn("CPU %u has %u vectors, %u available. Cannot disable CPU\n", pr_warn 1044 arch/x86/kernel/apic/vector.c pr_warn("Reserved vectors %u > available %u. IRQ request may fail\n", pr_warn 974 arch/x86/kernel/apic/x2apic_uv_x.c pr_warn("UV: unable to determine platform RTC clock frequency, guessing.\n"); pr_warn 523 arch/x86/kernel/cpu/amd.c pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n"); pr_warn 1473 arch/x86/kernel/cpu/bugs.c pr_warn("Kernel not compiled for PAE. No mitigation for L1TF\n"); pr_warn 1480 arch/x86/kernel/cpu/bugs.c pr_warn("System has more than MAX_PA/2 memory. L1TF mitigation not effective.\n"); pr_warn 454 arch/x86/kernel/cpu/cacheinfo.c pr_warn("L3 slot %d in use/index already disabled!\n", pr_warn 533 arch/x86/kernel/cpu/common.c pr_warn("CPU: CPU feature " X86_CAP_FMT " disabled, no CPUID level 0x%x\n", pr_warn 2030 arch/x86/kernel/cpu/common.c pr_warn("x86/CPU: CPU features have changed after loading microcode, but might not take effect.\n"); pr_warn 2031 arch/x86/kernel/cpu/common.c pr_warn("x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.\n"); pr_warn 228 arch/x86/kernel/cpu/hygon.c pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n"); pr_warn 65 arch/x86/kernel/cpu/intel.c pr_warn("x86/mpx: Disabling MPX since SMEP not present\n"); pr_warn 215 arch/x86/kernel/cpu/intel.c pr_warn("Intel Spectre v2 broken microcode detected; disabling Speculation Control\n"); pr_warn 236 arch/x86/kernel/cpu/intel.c pr_warn("Atom PSE erratum detected, BIOS microcode update recommended\n"); pr_warn 426 arch/x86/kernel/cpu/intel.c pr_warn("PAE forced!\n"); pr_warn 597 arch/x86/kernel/cpu/intel.c pr_warn("x86/tme: Unknown policy is active: %#llx\n", tme_policy); pr_warn 273 arch/x86/kernel/cpu/mce/amd.c pr_warn("Failed to read MCA_IPID for bank %d\n", bank); pr_warn 1523 arch/x86/kernel/cpu/mce/core.c pr_warn("CPU%d: Using only %u machine check banks out of %u\n", pr_warn 1924 arch/x86/kernel/cpu/mce/core.c pr_warn(FW_BUG pr_warn 191 arch/x86/kernel/cpu/mce/therm_throt.c pr_warn("CPU%d: %s temperature above threshold, cpu clock throttled (total events = %lu)\n", pr_warn 948 arch/x86/kernel/cpu/microcode/amd.c pr_warn("AMD CPU family 0x%x not supported\n", c->x86); pr_warn 575 arch/x86/kernel/cpu/microcode/core.c pr_warn("Error reloading microcode on CPU %d\n", cpu); pr_warn 280 arch/x86/kernel/cpu/microcode/intel.c pr_warn("Bad extended signature table checksum, aborting.\n"); pr_warn 107 arch/x86/kernel/cpu/mtrr/centaur.c pr_warn("mtrr: only write-combining%s supported\n", pr_warn 103 arch/x86/kernel/cpu/mtrr/cleanup.c pr_warn(BIOS_BUG_MSG, i); pr_warn 974 arch/x86/kernel/cpu/mtrr/cleanup.c pr_warn("WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing %lluMB of RAM.\n", pr_warn 509 arch/x86/kernel/cpu/mtrr/generic.c pr_warn("mtrr: your CPUs had inconsistent fixed MTRR settings\n"); pr_warn 511 arch/x86/kernel/cpu/mtrr/generic.c pr_warn("mtrr: your CPUs had inconsistent variable MTRR settings\n"); pr_warn 513 arch/x86/kernel/cpu/mtrr/generic.c pr_warn("mtrr: your CPUs had inconsistent MTRRdefType settings\n"); pr_warn 614 arch/x86/kernel/cpu/mtrr/generic.c pr_warn("mtrr: your BIOS has configured an incorrect mask, fixing it.\n"); pr_warn 876 arch/x86/kernel/cpu/mtrr/generic.c pr_warn("mtrr: base(0x%lx000) is not 4 MiB aligned\n", base); pr_warn 882 arch/x86/kernel/cpu/mtrr/generic.c pr_warn("mtrr: writable mtrr between 0x70000000 and 0x7003FFFF may hang the CPU.\n"); pr_warn 896 arch/x86/kernel/cpu/mtrr/generic.c pr_warn("mtrr: base(0x%lx000) is not aligned on a size(0x%lx000) boundary\n", base, size); pr_warn 316 arch/x86/kernel/cpu/mtrr/mtrr.c pr_warn("type: %u invalid\n", type); pr_warn 322 arch/x86/kernel/cpu/mtrr/mtrr.c pr_warn("your processor doesn't support write-combining\n"); pr_warn 327 arch/x86/kernel/cpu/mtrr/mtrr.c pr_warn("zero sized request\n"); pr_warn 333 arch/x86/kernel/cpu/mtrr/mtrr.c pr_warn("base or size exceeds the MTRR width\n"); pr_warn 364 arch/x86/kernel/cpu/mtrr/mtrr.c pr_warn("0x%lx000,0x%lx000 overlaps existing 0x%lx000,0x%lx000\n", base, size, lbase, pr_warn 372 arch/x86/kernel/cpu/mtrr/mtrr.c pr_warn("type mismatch for %lx000,%lx000 old: %s new: %s\n", pr_warn 410 arch/x86/kernel/cpu/mtrr/mtrr.c pr_warn("size and base must be multiples of 4 kiB\n"); pr_warn 508 arch/x86/kernel/cpu/mtrr/mtrr.c pr_warn("register: %d too big\n", reg); pr_warn 513 arch/x86/kernel/cpu/mtrr/mtrr.c pr_warn("MTRR %d not used\n", reg); pr_warn 517 arch/x86/kernel/cpu/mtrr/mtrr.c pr_warn("reg: %d has count=0\n", reg); pr_warn 576 arch/x86/kernel/cpu/mtrr/mtrr.c pr_warn("Failed to add WC MTRR for [%p-%p]; performance may suffer.", pr_warn 565 arch/x86/kernel/cpu/resctrl/core.c pr_warn("Could't find cache id for cpu %d\n", cpu); pr_warn 610 arch/x86/kernel/cpu/resctrl/core.c pr_warn("Could't find cache id for cpu %d\n", cpu); pr_warn 1504 arch/x86/kernel/cpu/resctrl/rdtgroup.c pr_warn("Failed to add %s, err=%d\n", rft->name, ret); pr_warn 204 arch/x86/kernel/cpu/vmware.c pr_warn("Failed to get TSC freq from the hypervisor\n"); pr_warn 147 arch/x86/kernel/devicetree.c pr_warn("%pOF: missing local APIC ID\n", dn); pr_warn 881 arch/x86/kernel/e820.c pr_warn("mem=nopentium ignored! (only supported on x86_32)\n"); pr_warn 57 arch/x86/kernel/fpu/bugs.c pr_warn("Hmm, FPU with FDIV bug\n"); pr_warn 513 arch/x86/kernel/fpu/xstate.c pr_warn("CPUID[%02x, %02x]: eax=%08x ebx=%08x ecx=%08x edx=%08x\n", pr_warn 661 arch/x86/kernel/fpu/xstate.c pr_warn("x86/fpu: xstate buffer too small (%zu < %d), disabling xsave\n", pr_warn 629 arch/x86/kernel/ftrace.c pr_warn("Failed on %s (%d):\n", report, count); pr_warn 913 arch/x86/kernel/ftrace.c pr_warn("Expected e8, got %x\n", calc.op); pr_warn 780 arch/x86/kernel/hpet.c pr_warn("Config register invalid. Disabling HPET\n"); pr_warn 805 arch/x86/kernel/hpet.c pr_warn("Counter not counting. HPET disabled\n"); pr_warn 861 arch/x86/kernel/hpet.c pr_warn("Disabling HPET.\n"); pr_warn 873 arch/x86/kernel/hpet.c pr_warn("Global config: Unknown bits %#x\n", cfg); pr_warn 891 arch/x86/kernel/hpet.c pr_warn("Channel #%u config: Unknown bits %#x\n", i, cfg); pr_warn 1235 arch/x86/kernel/hpet.c pr_warn("Lost %d RTC interrupts\n", lost_ints); pr_warn 819 arch/x86/kernel/kprobes/core.c pr_warn("kretprobe is stacked incorrectly. Trying to fixup.\n"); pr_warn 826 arch/x86/kernel/kprobes/core.c pr_warn("%ps must be blacklisted because of incorrect kretprobe order\n", pr_warn 239 arch/x86/kernel/kvmclock.c pr_warn("%s: failed to alloc %d pages", __func__, (1U << order)); pr_warn 255 arch/x86/kernel/kvmclock.c pr_warn("kvmclock: set_memory_decrypted() failed. Disabling\n"); pr_warn 90 arch/x86/kernel/mpparse.c pr_warn("MP table busid value (%d) for bustype %s is too large, max. supported is %d\n", pr_warn 112 arch/x86/kernel/mpparse.c pr_warn("Unknown bustype %s - ignoring\n", str); pr_warn 69 arch/x86/kernel/paravirt.c pr_warn("paravirt: Failed to patch indirect CALL at %ps\n", (void *)addr); pr_warn 237 arch/x86/kernel/pci-calgary_64.c pr_warn("IOMMU full\n"); pr_warn 262 arch/x86/kernel/pci-calgary_64.c pr_warn("failed to allocate %u pages in iommu %p\n", pr_warn 551 arch/x86/kernel/pci-calgary_64.c pr_warn("PCI bus not quiesced, continuing anyway\n"); pr_warn 593 arch/x86/kernel/pci-calgary_64.c pr_warn("CalIOC2: PCI bus not quiesced, continuing anyway\n"); pr_warn 605 arch/x86/kernel/pci-calgary_64.c pr_warn("CalIOC2: too many SoftStopFaults, aborting TCE cache flush sequence!\n"); pr_warn 95 arch/x86/kernel/pci-dma.c pr_warn("forcesac option ignored.\n"); pr_warn 97 arch/x86/kernel/pci-dma.c pr_warn("allowdac option ignored.\n"); pr_warn 99 arch/x86/kernel/pci-dma.c pr_warn("nodac option ignored.\n"); pr_warn 771 arch/x86/kernel/setup.c pr_warn(".text .data .bss are not marked as E820_TYPE_RAM!\n"); pr_warn 1253 arch/x86/kernel/smpboot.c pr_warn("More than 8 CPUs detected - skipping them\n" pr_warn 1275 arch/x86/kernel/smpboot.c pr_warn("weird, boot CPU (#%d) not listed by the BIOS\n", pr_warn 1469 arch/x86/kernel/smpboot.c pr_warn("Boot CPU (id %d) not listed by BIOS\n", cpu); pr_warn 1498 arch/x86/kernel/smpboot.c pr_warn("%d Processors exceeds NR_CPUS limit of %u\n", pr_warn 1507 arch/x86/kernel/smpboot.c pr_warn("%d Processors exceeds max_cpus limit of %u\n", pr_warn 125 arch/x86/kernel/time.c pr_warn("clocksource %s registered with invalid vclock_mode %d. Disabling vclock.\n", pr_warn 131 arch/x86/kernel/time.c pr_warn("clocksource %s registered with invalid mask %016llx. Disabling vclock.\n", pr_warn 814 arch/x86/kernel/tsc.c pr_warn("Unable to calibrate against PIT\n"); pr_warn 824 arch/x86/kernel/tsc.c pr_warn("HPET/PMTIMER calibration failed\n"); pr_warn 843 arch/x86/kernel/tsc.c pr_warn("HPET/PMTIMER calibration failed. Using PIT calibration.\n"); pr_warn 852 arch/x86/kernel/tsc.c pr_warn("PIT calibration deviates from %s: %lu %lu\n", pr_warn 74 arch/x86/kernel/tsc_sync.c pr_warn(FW_BUG "TSC ADJUST differs: CPU%u %lld --> %lld. Restoring\n", pr_warn 101 arch/x86/kernel/tsc_sync.c pr_warn(FW_BUG "TSC ADJUST: CPU%u: %lld force to 0\n", pr_warn 486 arch/x86/kernel/tsc_sync.c pr_warn("TSC ADJUST compensate: CPU%u observed %lld warp. Adjust: %lld\n", pr_warn 15 arch/x86/lib/msr.c pr_warn("%s: error allocating msrs\n", __func__); pr_warn 503 arch/x86/mm/init_32.c pr_warn("try to clear pte for ram above max_low_pfn: pfn: %lx pmd: %p pmd phys: %lx, but pmd is big page and is not using pte !\n", pr_warn 293 arch/x86/mm/ioremap.c pr_warn("caller %pS mapping multiple BARs\n", caller); pr_warn 396 arch/x86/mm/mem_encrypt.c pr_warn("failed to free unused decrypted pages\n"); pr_warn 139 arch/x86/mm/numa.c pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n", pr_warn 271 arch/x86/mm/numa.c pr_warn("Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n", pr_warn 363 arch/x86/mm/numa.c pr_warn("Warning: can't allocate distance table!\n"); pr_warn 507 arch/x86/mm/pageattr.c pr_warn("CPA %8s %10s: 0x%016lx - 0x%016lx PFN %lx req %016llx prevent %016llx\n", pr_warn 900 arch/x86/mm/pat.c pr_warn("x86/PAT: %s:%d map pfn RAM range req %s for [mem %#010Lx-%#010Lx], got %s\n", pr_warn 601 arch/x86/pci/mmconfig-shared.c pr_warn(PREFIX "no memory for MCFG entries\n"); pr_warn 268 arch/x86/platform/efi/efi.c pr_warn("mem%02u: %s range=[0x%016llx-0x%llx%016llx] (invalid)\n", pr_warn 272 arch/x86/platform/efi/efi.c pr_warn("mem%02u: %s range=[0x%016llx-0x%016llx] (invalid)\n", pr_warn 300 arch/x86/platform/efi/efi.c pr_warn("Removing %d invalid memory map entries.\n", n_removal); pr_warn 1065 arch/x86/platform/efi/efi.c pr_warn("need at least one option\n"); pr_warn 426 arch/x86/platform/efi/efi_64.c pr_warn("Error mapping PA 0x%llx -> VA 0x%llx!\n", pr_warn 472 arch/x86/platform/efi/efi_64.c pr_warn(FW_WARN "VA address range overflow!\n"); pr_warn 206 arch/x86/platform/intel-mid/intel-mid.c pr_warn("X86 INTEL_MID timer option %s not recognised use x86_intel_mid_timer=apbt_only or lapic_and_apbt\n", pr_warn 85 arch/x86/platform/scx200/scx200_32.c pr_warn("Configuration Block not found\n"); pr_warn 984 arch/x86/platform/uv/uv_nmi.c pr_warn("UV: NMI handler failed to register\n"); pr_warn 987 arch/x86/platform/uv/uv_nmi.c pr_warn("UV: PING NMI handler failed to register\n"); pr_warn 324 arch/x86/power/cpu.c pr_warn("CPU0 is offline.\n"); pr_warn 156 arch/x86/tools/insn_decoder_test.c pr_warn("Found an x86 instruction decoder bug, " pr_warn 158 arch/x86/tools/insn_decoder_test.c pr_warn("%s", line); pr_warn 159 arch/x86/tools/insn_decoder_test.c pr_warn("objdump says %d bytes, but insn_get_length() " pr_warn 166 arch/x86/tools/insn_decoder_test.c pr_warn("Decoded and checked %d instructions with %d " pr_warn 336 arch/x86/xen/enlighten.c pr_warn("Unable to pin on physical cpu %d. In case of problems consider vcpu pinning.\n", pr_warn 346 arch/x86/xen/enlighten.c pr_warn("Physical cpu %d not available for pinning. Check Xen cpu configuration.\n", pr_warn 122 arch/x86/xen/enlighten_pv.c pr_warn("WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING!\n" pr_warn 144 arch/x86/xen/smp.c pr_warn("%s: failed to bring CPU %d down, error %d\n", pr_warn 31 arch/xtensa/kernel/hw_breakpoint.c pr_warn("unknown slot type: %d\n", type); pr_warn 100 arch/xtensa/kernel/s32c1i_selftest.c pr_warn("S32C1I took exception %d, %d\n", cause1, cause2); pr_warn 122 arch/xtensa/kernel/s32c1i_selftest.c pr_warn("Processor configuration lacks atomic compare-and-swap support!\n"); pr_warn 157 arch/xtensa/kernel/setup.c pr_warn("Invalid boot parameters!\n"); pr_warn 173 arch/xtensa/kernel/setup.c pr_warn("Ignoring tag 0x%08x\n", tag->id); pr_warn 167 arch/xtensa/kernel/time.c pr_warn("%s: CPU input clock not found\n", pr_warn 171 arch/xtensa/kernel/time.c pr_warn("%s: CPU node not found in the device tree\n", pr_warn 235 arch/xtensa/mm/init.c pr_warn("Unrecognized memmap syntax: %s\n", p); pr_warn 148 arch/xtensa/platforms/iss/network.c pr_warn("%s: assigning a globally valid ethernet address\n", pr_warn 1515 block/blk-cgroup.c pr_warn("blkcg_policy_register: BLKCG_MAX_POLS too small\n"); pr_warn 2820 block/blk-mq.c pr_warn("Allocate new hctx on node %d fails,\ pr_warn 3312 block/blk-mq.c pr_warn("Increasing nr_hw_queues to %d fails, fallback to %d\n", pr_warn 539 block/blk-zoned.c pr_warn("%s: failed to revalidate zones\n", disk->disk_name); pr_warn 28 block/cmdline-parser.c pr_warn("cmdline partition size is invalid."); pr_warn 46 block/cmdline-parser.c pr_warn("cmdline partition format is invalid."); pr_warn 107 block/cmdline-parser.c pr_warn("cmdline partition has no block device."); pr_warn 137 block/cmdline-parser.c pr_warn("cmdline partition has no valid partition."); pr_warn 196 block/cmdline-parser.c pr_warn("cmdline partition has no valid partition."); pr_warn 697 block/elevator.c pr_warn("\"%s\" elevator initialization failed, " pr_warn 2026 block/genhd.c pr_warn("%s: failed to initialize events\n", disk->disk_name); pr_warn 2045 block/genhd.c pr_warn("%s: failed to create sysfs files for events\n", pr_warn 290 block/partitions/aix.c pr_warn("partition %s (%u pp's found) is " pr_warn 84 block/partitions/cmdline.c pr_warn("Overlapping partitions are used in command line partitions."); pr_warn 85 block/partitions/cmdline.c pr_warn("Don't use filesystems on overlapping partitions:"); pr_warn 104 block/partitions/cmdline.c pr_warn("%s[%llu,%llu] overlaps with " pr_warn 489 block/partitions/efi.c pr_warn("GPT:Primary header LBA != Alt. header alternate_lba\n"); pr_warn 490 block/partitions/efi.c pr_warn("GPT:%lld != %lld\n", pr_warn 496 block/partitions/efi.c pr_warn("GPT:Primary header alternate_lba != Alt. header my_lba\n"); pr_warn 497 block/partitions/efi.c pr_warn("GPT:%lld != %lld\n", pr_warn 504 block/partitions/efi.c pr_warn("GPT:first_usable_lbas don't match.\n"); pr_warn 505 block/partitions/efi.c pr_warn("GPT:%lld != %lld\n", pr_warn 512 block/partitions/efi.c pr_warn("GPT:last_usable_lbas don't match.\n"); pr_warn 513 block/partitions/efi.c pr_warn("GPT:%lld != %lld\n", pr_warn 519 block/partitions/efi.c pr_warn("GPT:disk_guids don't match.\n"); pr_warn 524 block/partitions/efi.c pr_warn("GPT:num_partition_entries don't match: " pr_warn 532 block/partitions/efi.c pr_warn("GPT:sizeof_partition_entry values don't match: " pr_warn 540 block/partitions/efi.c pr_warn("GPT:partition_entry_array_crc32 values don't match: " pr_warn 547 block/partitions/efi.c pr_warn("GPT:Primary header thinks Alt. header is not at the end of the disk.\n"); pr_warn 548 block/partitions/efi.c pr_warn("GPT:%lld != %lld\n", pr_warn 555 block/partitions/efi.c pr_warn("GPT:Alternate GPT header not at the end of the disk.\n"); pr_warn 556 block/partitions/efi.c pr_warn("GPT:%lld != %lld\n", pr_warn 563 block/partitions/efi.c pr_warn("GPT: Use GNU Parted to correct GPT errors.\n"); pr_warn 637 block/partitions/efi.c pr_warn("Alternate GPT is invalid, using primary GPT.\n"); pr_warn 645 block/partitions/efi.c pr_warn("Primary GPT is invalid, using alternate GPT.\n"); pr_warn 576 crypto/adiantum.c pr_warn("Unsupported Adiantum instantiation: (%s,%s,%s)\n", pr_warn 106 crypto/asymmetric_keys/pkcs7_parser.c pr_warn("Inconsistently supplied authAttrs\n"); pr_warn 289 crypto/asymmetric_keys/pkcs7_parser.c pr_warn("Only support pkcs7_signedData type\n"); pr_warn 326 crypto/asymmetric_keys/pkcs7_parser.c pr_warn("Unsupported SignedData version\n"); pr_warn 366 crypto/asymmetric_keys/pkcs7_parser.c pr_warn("Unsupported SignerInfo version\n"); pr_warn 369 crypto/asymmetric_keys/pkcs7_parser.c pr_warn("SignedData-SignerInfo version mismatch\n"); pr_warn 442 crypto/asymmetric_keys/pkcs7_parser.c pr_warn("Unsupported data type %d\n", ctx->last_oid); pr_warn 487 crypto/asymmetric_keys/pkcs7_parser.c pr_warn("Mismatch between global data type (%d) and sinfo %u (%d)\n", pr_warn 516 crypto/asymmetric_keys/pkcs7_parser.c pr_warn("S/MIME Caps only allowed with Authenticode\n"); pr_warn 536 crypto/asymmetric_keys/pkcs7_parser.c pr_warn("Authenticode AuthAttrs only allowed with Authenticode\n"); pr_warn 547 crypto/asymmetric_keys/pkcs7_parser.c pr_warn("Repeated/multivalue AuthAttrs not permitted\n"); pr_warn 563 crypto/asymmetric_keys/pkcs7_parser.c pr_warn("Missing required AuthAttr\n"); pr_warn 569 crypto/asymmetric_keys/pkcs7_parser.c pr_warn("Unexpected Authenticode AuthAttr\n"); pr_warn 650 crypto/asymmetric_keys/pkcs7_parser.c pr_warn("Authenticode requires AuthAttrs\n"); pr_warn 76 crypto/asymmetric_keys/pkcs7_verify.c pr_warn("Sig %u: No messageDigest\n", sinfo->index); pr_warn 179 crypto/asymmetric_keys/pkcs7_verify.c pr_warn("Sig %u: X.509 algo and PKCS#7 sig algo don't match\n", pr_warn 290 crypto/asymmetric_keys/pkcs7_verify.c pr_warn("Sig %u: X.509 chain contains auth-skid nonmatch (%u->%u)\n", pr_warn 297 crypto/asymmetric_keys/pkcs7_verify.c pr_warn("Sig %u: X.509 chain contains loop\n", pr_warn 358 crypto/asymmetric_keys/pkcs7_verify.c pr_warn("Message signed outside of X.509 validity window\n"); pr_warn 416 crypto/asymmetric_keys/pkcs7_verify.c pr_warn("Invalid module sig (not pkcs7-data)\n"); pr_warn 420 crypto/asymmetric_keys/pkcs7_verify.c pr_warn("Invalid module sig (has authattrs)\n"); pr_warn 426 crypto/asymmetric_keys/pkcs7_verify.c pr_warn("Invalid firmware sig (not pkcs7-data)\n"); pr_warn 430 crypto/asymmetric_keys/pkcs7_verify.c pr_warn("Invalid firmware sig (missing authattrs)\n"); pr_warn 436 crypto/asymmetric_keys/pkcs7_verify.c pr_warn("Invalid kexec sig (not Authenticode)\n"); pr_warn 443 crypto/asymmetric_keys/pkcs7_verify.c pr_warn("Invalid unspecified sig (not pkcs7-data)\n"); pr_warn 58 crypto/asymmetric_keys/pkcs8_parser.c pr_warn("Unsupported PKCS#8 version\n"); pr_warn 99 crypto/asymmetric_keys/x509_cert_parser.c pr_warn("Couldn't decode AuthKeyIdentifier\n"); pr_warn 263 crypto/asymmetric_keys/x509_cert_parser.c pr_warn("Got cert with pkey (%u) and sig (%u) algorithm OIDs\n", pr_warn 531 crypto/essiv.c pr_warn("Only authenc() type AEADs are supported by ESSIV\n"); pr_warn 543 crypto/essiv.c pr_warn("Failed to parse ESSIV cipher name from skcipher cra_name\n"); pr_warn 561 crypto/essiv.c pr_warn("Unsupported essiv instantiation: essiv(%s,%s)\n", pr_warn 1587 crypto/testmgr.c pr_warn("alg: hash: skipping comparison tests for %s because %s is unavailable\n", pr_warn 2174 crypto/testmgr.c pr_warn("alg: aead: skipping comparison tests for %s because %s is unavailable\n", pr_warn 2743 crypto/testmgr.c pr_warn("alg: skcipher: skipping comparison tests for %s because %s is unavailable\n", pr_warn 5146 crypto/testmgr.c pr_warn("testmgr: alg_test_descs entries in wrong order: '%s' before '%s'\n", pr_warn 5152 crypto/testmgr.c pr_warn("testmgr: duplicate alg_test_descs entry: '%s'\n", pr_warn 5177 crypto/testmgr.c pr_warn("alg: extra crypto tests enabled. This is intended for developer use only.\n"); pr_warn 205 drivers/acpi/acpi_extlog.c pr_warn(FW_BUG "L1 Directory is invalid at physical %llx\n", pr_warn 232 drivers/acpi/acpi_extlog.c pr_warn("Not loading eMCA, error reporting force-enabled through EDAC.\n"); pr_warn 241 drivers/acpi/acpi_extlog.c pr_warn(FW_BUG EMCA_BUG, pr_warn 259 drivers/acpi/acpi_extlog.c pr_warn(FW_BUG EMCA_BUG, pr_warn 270 drivers/acpi/acpi_extlog.c pr_warn(FW_BUG EMCA_BUG, pr_warn 304 drivers/acpi/acpi_extlog.c pr_warn(FW_BUG "Extended error log disabled because of problems parsing f/w tables\n"); pr_warn 598 drivers/acpi/acpi_ipmi.c pr_warn("Can't register IPMI opregion space handle\n"); pr_warn 423 drivers/acpi/acpi_pad.c pr_warn("Unsupported event [0x%x]\n", event); pr_warn 145 drivers/acpi/acpi_watchdog.c pr_warn("Unsupported address space: %u\n", pr_warn 676 drivers/acpi/apei/einj.c pr_warn("ACPI disabled.\n"); pr_warn 683 drivers/acpi/apei/einj.c pr_warn("EINJ table not found.\n"); pr_warn 694 drivers/acpi/apei/einj.c pr_warn(FW_BUG "Invalid EINJ table.\n"); pr_warn 103 drivers/acpi/apei/erst.c pr_warn(FW_WARN "Firmware does not respond in time.\n"); pr_warn 179 drivers/acpi/apei/erst.c pr_warn(FW_WARN pr_warn 199 drivers/acpi/apei/erst.c pr_warn(FW_WARN pr_warn 264 drivers/acpi/apei/erst.c pr_warn("MOVE_DATA can not be used in interrupt context.\n"); pr_warn 516 drivers/acpi/apei/erst.c pr_warn(FW_WARN "too many record IDs!\n"); pr_warn 746 drivers/acpi/apei/erst.c pr_warn("NVRAM ERST Log Address Range not implemented yet.\n"); pr_warn 1137 drivers/acpi/apei/ghes.c pr_warn(GHES_PFX "Generic hardware error source: %d notified via SEA is not supported\n", pr_warn 1145 drivers/acpi/apei/ghes.c pr_warn(GHES_PFX "Generic hardware error source: %d notified via NMI interrupt is not supported!\n", pr_warn 1152 drivers/acpi/apei/ghes.c pr_warn(GHES_PFX "Generic hardware error source: %d notified via SDE Interface is not supported!\n", pr_warn 169 drivers/acpi/arm64/gtdt.c pr_warn("Revision:%d doesn't support Platform Timers.\n", pr_warn 240 drivers/acpi/arm64/gtdt.c pr_warn("failed to map physical timer irq in frame %d.\n", pr_warn 250 drivers/acpi/arm64/gtdt.c pr_warn("failed to map virtual timer irq in frame %d.\n", pr_warn 356 drivers/acpi/arm64/gtdt.c pr_warn("failed to map the Watchdog interrupt.\n"); pr_warn 312 drivers/acpi/arm64/iort.c pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n", pr_warn 857 drivers/acpi/arm64/iort.c pr_warn("IORT node type %u does not describe an SMMU\n", type); pr_warn 562 drivers/acpi/battery.c pr_warn(FW_BUG "The _BIX method is broken, using _BIF.\n"); pr_warn 508 drivers/acpi/bus.c pr_warn("event %x is not supported by \\_SB device\n", event); pr_warn 509 drivers/acpi/ec.c pr_warn("Warning: Maximum of %d stale EC events cleared\n", i); pr_warn 57 drivers/acpi/irq.c pr_warn("GSI: No registered irqchip, giving up\n"); pr_warn 174 drivers/acpi/numa.c pr_warn("Found unsupported SRAT entry (type = 0x%x)\n", pr_warn 295 drivers/acpi/numa.c pr_warn("SRAT: Failed to mark hotplug range [mem %#010Lx-%#010Lx] in memblock\n", pr_warn 324 drivers/acpi/numa.c pr_warn("Found unsupported x2apic [0x%08x] SRAT entry\n", pa->apic_id); pr_warn 340 drivers/acpi/pmic/intel_pmic.c pr_warn("%s: No PMIC registered\n", __func__); pr_warn 362 drivers/acpi/pmic/intel_pmic.c pr_warn("%s: Not implemented\n", __func__); pr_warn 363 drivers/acpi/pmic/intel_pmic.c pr_warn("%s: i2c-addr: 0x%x reg-addr 0x%x value 0x%x mask 0x%x\n", pr_warn 242 drivers/acpi/pmic/intel_pmic_chtwc.c pr_warn("%s warning addresses too big client 0x%x reg 0x%x\n", pr_warn 120 drivers/acpi/pptt.c pr_warn("Found duplicate cache level/type unable to determine uniqueness\n"); pr_warn 267 drivers/acpi/pptt.c pr_warn("Invalid zero length subtable\n"); pr_warn 442 drivers/acpi/processor_idle.c pr_warn("Limiting number of power states to max (%d)\n", pr_warn 444 drivers/acpi/processor_idle.c pr_warn("Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n"); pr_warn 1134 drivers/acpi/processor_idle.c pr_warn("Limiting number of LPI states to max (%d)\n", pr_warn 1136 drivers/acpi/processor_idle.c pr_warn("Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n"); pr_warn 90 drivers/acpi/processor_perflib.c pr_warn("Failed to update perflib freq constraint: CPU%d (%d)\n", pr_warn 121 drivers/acpi/processor_thermal.c pr_warn("Failed to update thermal freq constraint: CPU%d (%d)\n", pr_warn 244 drivers/acpi/resource.c pr_warn("acpi resource window ([%#llx-%#llx] ignored, not CPU addressable)\n", pr_warn 380 drivers/acpi/sysfs.c pr_warn("%4.4s: too many table instances\n", pr_warn 211 drivers/acpi/tables.c pr_warn("Found unsupported MADT entry (type = 0x%x)\n", pr_warn 305 drivers/acpi/tables.c pr_warn("%4.4s not present\n", id); pr_warn 352 drivers/acpi/tables.c pr_warn("[%4.4s:0x%02x] found the maximum %i entries\n", pr_warn 379 drivers/acpi/tables.c pr_warn("%4.4s not present\n", id); pr_warn 457 drivers/acpi/tables.c pr_warn("BIOS bug: multiple APIC/MADT found, using %d\n", pr_warn 459 drivers/acpi/tables.c pr_warn("If \"acpi_apic_instance=%d\" works better, " pr_warn 472 drivers/acpi/tables.c pr_warn("Override [%4.4s-%8.8s], this is unsafe: tainting kernel\n", pr_warn 287 drivers/acpi/thermal.c pr_warn(FW_BUG "Invalid critical threshold (%llu)\n", pr_warn 305 drivers/acpi/thermal.c pr_warn(PREFIX "Critical threshold %d C\n", pr_warn 378 drivers/acpi/thermal.c pr_warn(PREFIX "Invalid passive threshold\n"); pr_warn 440 drivers/acpi/thermal.c pr_warn(PREFIX "Invalid active%d threshold\n", pr_warn 491 drivers/acpi/thermal.c pr_warn(FW_BUG "No valid trip found\n"); pr_warn 557 drivers/acpi/thermal.c pr_warn("thermal zone will be disabled\n"); pr_warn 1969 drivers/android/binder.c pr_warn("Unexpected reply error: %u\n", pr_warn 5288 drivers/android/binder.c pr_warn("Unable to create file %s in binderfs (error %d)\n", pr_warn 890 drivers/ata/libata-scsi.c pr_warn("ata%u: status=0x%02x { ", id, stat); pr_warn 904 drivers/ata/libata-scsi.c pr_warn("ata%u: error=0x%02x { ", id, err); pr_warn 186 drivers/ata/pata_hpt366.c pr_warn("%s is not supported for %s\n", modestr, list[i]); pr_warn 234 drivers/ata/pata_hpt37x.c pr_warn("%s is not supported for %s\n", modestr, list[i]); pr_warn 954 drivers/ata/pata_hpt37x.c pr_warn("BIOS has not set timing clocks\n"); pr_warn 423 drivers/ata/pata_hpt3x2n.c pr_warn("BIOS clock data not set\n"); pr_warn 2548 drivers/atm/idt77252.c pr_warn("%s: SCQ drain timeout: %u used\n", pr_warn 378 drivers/base/arch_topology.c pr_warn("%pOF: empty cluster\n", cluster); pr_warn 338 drivers/base/cacheinfo.c pr_warn("Unable to detect cache hierarchy for CPU %d\n", cpu); pr_warn 190 drivers/base/memory.c pr_warn("section %ld pfn[%lx, %lx) not present\n", pr_warn 194 drivers/base/memory.c pr_warn("section %ld pfn[%lx, %lx) no valid memmap\n", pr_warn 198 drivers/base/memory.c pr_warn("section %ld pfn[%lx, %lx) is already online\n", pr_warn 1497 drivers/base/platform.c pr_warn("%s: unable to parse %s parameter\n", pr_warn 1529 drivers/base/platform.c pr_warn("%s: unable to probe %s early.\n", pr_warn 910 drivers/base/power/domain.c pr_warn("genpd: Not disabling unused power domains\n"); pr_warn 1708 drivers/base/power/domain.c pr_warn("%s: unable to remove subdomain %s\n", pr_warn 1832 drivers/base/power/domain.c pr_warn("%s: no governor for states\n", genpd->name); pr_warn 255 drivers/base/power/trace.c pr_warn("Possible incorrect RTC due to pm_trace, please use 'ntpdate' or 'rdate' to reset it.\n"); pr_warn 64 drivers/block/aoe/aoenet.c pr_warn("aoe: packet could not be sent on %s. %s\n", pr_warn 646 drivers/block/loop.c pr_warn("%s: partition scan of loop%d (%s) failed (rc=%d)\n", pr_warn 1192 drivers/block/loop.c pr_warn("%s: partition scan of loop%d failed (rc=%d)\n", pr_warn 1321 drivers/block/loop.c pr_warn("%s: loop%d (%s) has still dirty pages (nrpages=%lu)\n", pr_warn 1570 drivers/block/loop.c pr_warn("%s: loop%d (%s) has still dirty pages (nrpages=%lu)\n", pr_warn 4401 drivers/block/mtip32xx/mtip32xx.c pr_warn("Error creating debugfs parent\n"); pr_warn 1759 drivers/block/null_blk_main.c pr_warn("invalid block size\n"); pr_warn 1760 drivers/block/null_blk_main.c pr_warn("defaults block size to %lu\n", PAGE_SIZE); pr_warn 1780 drivers/block/null_blk_main.c pr_warn("submit_queues param is set to %u.\n", pr_warn 373 drivers/block/sunvdc.c pr_warn(PFX "Unexpected LDC event %d\n", event); pr_warn 1154 drivers/block/sunvdc.c pr_warn(PFX "%s ldc down %llu seconds, draining queue\n", pr_warn 1182 drivers/block/sunvdc.c pr_warn(PFX "%s ldc link reset\n", port->disk_name); pr_warn 546 drivers/block/xen-blkback/blkback.c pr_warn("Error starting transaction\n"); pr_warn 552 drivers/block/xen-blkback/blkback.c pr_warn("Error writing new size\n"); pr_warn 562 drivers/block/xen-blkback/blkback.c pr_warn("Error writing the state\n"); pr_warn 570 drivers/block/xen-blkback/blkback.c pr_warn("Error ending transaction\n"); pr_warn 1025 drivers/block/xen-blkback/blkback.c pr_warn("access denied: DISCARD [%llu->%llu] on dev=%04x\n", pr_warn 1138 drivers/block/xen-blkback/blkback.c pr_warn("Frontend provided bogus ring requests (%d - %d = %d). Halting ring processing on dev=%04x\n", pr_warn 472 drivers/block/xen-blkback/xenbus.c pr_warn("xen_vbd_create: device %08x could not be opened\n", pr_warn 479 drivers/block/xen-blkback/xenbus.c pr_warn("xen_vbd_create: device %08x doesn't exist\n", pr_warn 642 drivers/block/xen-blkback/xenbus.c pr_warn("Error writing multi-queue-max-queues\n"); pr_warn 655 drivers/block/xen-blkback/xenbus.c pr_warn("%s write out 'max-ring-page-order' failed\n", __func__); pr_warn 664 drivers/block/xen-blkback/xenbus.c pr_warn("%s failed\n", __func__); pr_warn 707 drivers/block/xen-blkback/xenbus.c pr_warn("changing physical device (from %x:%x to %x:%x) not supported.\n", pr_warn 1129 drivers/block/xen-blkfront.c pr_warn("blkfront: %#x's minor (%#x) out of range; ignoring\n", pr_warn 2726 drivers/block/xen-blkfront.c pr_warn("xen_blk: can't get major %d with name %s\n", pr_warn 680 drivers/bus/mips_cdmm.c pr_warn("cdmm: Failed to register CPU notifier\n"); pr_warn 1232 drivers/bus/mvebu-mbus.c pr_warn("malformed ranges entry '%pOFn'\n", node); pr_warn 1355 drivers/bus/mvebu-mbus.c pr_warn(FW_WARN "deprecated mbus-mvebu Device Tree, suspend/resume will not work\n"); pr_warn 847 drivers/char/applicom.c pr_warn("APPLICOM driver IOCTL, bad board number %d\n", pr_warn 436 drivers/char/hw_random/core.c pr_warn("hwrng: no data available\n"); pr_warn 219 drivers/char/hw_random/intel-rng.c pr_warn(PFX "unusual: RNG already disabled\n"); pr_warn 316 drivers/char/hw_random/intel-rng.c pr_warn("%s", warning); pr_warn 883 drivers/char/ipmi/ipmi_devintf.c pr_warn("ipmi: can't register smi watcher\n"); pr_warn 79 drivers/char/ipmi/ipmi_dmi.c pr_warn("Could not allocate dmi info\n"); pr_warn 5205 drivers/char/ipmi/ipmi_msghandler.c pr_warn("SMI message count %d at exit\n", count); pr_warn 5208 drivers/char/ipmi/ipmi_msghandler.c pr_warn("recv message count %d at exit\n", count); pr_warn 125 drivers/char/ipmi/ipmi_powernv.c pr_warn("no current message?\n"); pr_warn 155 drivers/char/ipmi/ipmi_powernv.c pr_warn("unexpected IPMI message size %lld\n", size); pr_warn 161 drivers/char/ipmi/ipmi_powernv.c pr_warn("unexpected IPMI message format (version %d)\n", pr_warn 100 drivers/char/ipmi/ipmi_si_hardcode.c pr_warn("Interface type specified for interface %d, was invalid: %s\n", pr_warn 67 drivers/char/ipmi/ipmi_si_hotmod.c pr_warn("No hotmod %s given\n", name); pr_warn 80 drivers/char/ipmi/ipmi_si_hotmod.c pr_warn("Invalid hotmod %s '%s'\n", name, *curr); pr_warn 91 drivers/char/ipmi/ipmi_si_hotmod.c pr_warn("No option given for '%s'\n", curr); pr_warn 96 drivers/char/ipmi/ipmi_si_hotmod.c pr_warn("Bad option given for '%s'\n", curr); pr_warn 134 drivers/char/ipmi/ipmi_si_hotmod.c pr_warn("Invalid hotmod address '%s': %d\n", curr, rv); pr_warn 176 drivers/char/ipmi/ipmi_si_hotmod.c pr_warn("Invalid hotmod option '%s'\n", curr); pr_warn 1545 drivers/char/ipmi/ipmi_si_intf.c pr_warn("Error getting response from get global enables command, the event buffer is not enabled\n"); pr_warn 1556 drivers/char/ipmi/ipmi_si_intf.c pr_warn("Invalid return from get global enables command, cannot enable the event buffer\n"); pr_warn 1574 drivers/char/ipmi/ipmi_si_intf.c pr_warn("Error getting response from set global, enables command, the event buffer is not enabled\n"); pr_warn 1584 drivers/char/ipmi/ipmi_si_intf.c pr_warn("Invalid return from get global, enables command, not enable the event buffer\n"); pr_warn 2151 drivers/char/ipmi/ipmi_si_intf.c pr_warn("Unable to find any System Interface(s)\n"); pr_warn 215 drivers/char/ipmi/ipmi_smic_sm.c pr_warn("ipmi_smic_drv: smic hosed: %s\n", reason); pr_warn 410 drivers/char/ipmi/ipmi_watchdog.c pr_warn("set timeout error: %d\n", rv); pr_warn 533 drivers/char/ipmi/ipmi_watchdog.c pr_warn("Unable to extend the watchdog timeout\n"); pr_warn 576 drivers/char/ipmi/ipmi_watchdog.c pr_warn("heartbeat send failure: %d\n", rv); pr_warn 995 drivers/char/ipmi/ipmi_watchdog.c pr_warn("Unable to get IPMI version, assuming 1.0\n"); pr_warn 1026 drivers/char/ipmi/ipmi_watchdog.c pr_warn("Error starting timer to test NMI: 0x%x. The NMI pretimeout will likely not work\n", pr_warn 1035 drivers/char/ipmi/ipmi_watchdog.c pr_warn("IPMI NMI didn't seem to occur. The NMI pretimeout will likely not work\n"); pr_warn 1088 drivers/char/ipmi/ipmi_watchdog.c pr_warn("error unlinking from IPMI: %d\n", rv); pr_warn 1261 drivers/char/ipmi/ipmi_watchdog.c pr_warn("Pretimeout op is to give data but NMI pretimeout is enabled, setting pretimeout op to none\n"); pr_warn 1270 drivers/char/ipmi/ipmi_watchdog.c pr_warn("Can't register nmi handler\n"); pr_warn 1312 drivers/char/ipmi/ipmi_watchdog.c pr_warn("can't register smi watcher\n"); pr_warn 292 drivers/char/nvram.c pr_warn("nvram: Using obsolete PMAC_NVRAM_GET_OFFSET ioctl\n"); pr_warn 297 drivers/char/ppdev.c pr_warn("%s: no associated port!\n", name); pr_warn 311 drivers/char/ppdev.c pr_warn("%s: failed to register device!\n", name); pr_warn 855 drivers/char/ppdev.c pr_warn(CHRDEV ": unable to get major %d\n", PP_MAJOR); pr_warn 865 drivers/char/ppdev.c pr_warn(CHRDEV ": unable to register with parport\n"); pr_warn 763 drivers/char/random.c pr_warn("random: negative entropy/overflow: pool %s count %d\n", pr_warn 1469 drivers/char/random.c pr_warn("random: negative entropy count: pool %s count %d\n", pr_warn 86 drivers/char/tpm/tpm-dev-common.c pr_warn("TPM user space timeout is deprecated (pid=%d)\n", pr_warn 2248 drivers/char/virtio_console.c pr_warn("Error creating debugfs dir for virtio-ports\n"); pr_warn 39 drivers/clk/at91/clk-h32mx.c pr_warn("H32MX clock is too fast\n"); pr_warn 317 drivers/clk/at91/clk-main.c pr_warn("Main crystal frequency not set, using approximate value\n"); pr_warn 82 drivers/clk/at91/clk-master.c pr_warn("master clk is underclocked"); pr_warn 84 drivers/clk/at91/clk-master.c pr_warn("master clk is overclocked"); pr_warn 231 drivers/clk/at91/pmc.c pr_warn("MCKR was not configured properly by the firmware\n"); pr_warn 234 drivers/clk/at91/pmc.c pr_warn("PLLAR was not configured properly by the firmware\n"); pr_warn 319 drivers/clk/bcm/clk-kona-setup.c pr_warn("%s: ignoring selector for %s (no parents)\n", pr_warn 353 drivers/clk/bcm/clk-kona-setup.c pr_warn("%s: bad %s fraction width for %s (%u > %u)\n", pr_warn 475 drivers/clk/bcm/clk-kona-setup.c pr_warn("%s: ignoring trigger for %s (not needed)\n", pr_warn 206 drivers/clk/bcm/clk-kona.c pr_warn("%s: %s/0x%04x bit %u was never %s\n", __func__, pr_warn 469 drivers/clk/bcm/clk-kona.c pr_warn("%s: invalid gate disable request (ignoring)\n", pr_warn 53 drivers/clk/berlin/berlin2-pll.c pr_warn("%s has zero rfdiv\n", clk_hw_get_name(hw)); pr_warn 61 drivers/clk/berlin/berlin2-pll.c pr_warn("%s has zero vcodiv (index %d)\n", pr_warn 41 drivers/clk/clk-conf.c pr_warn("clk: couldn't get parent clock %d for %pOF\n", pr_warn 57 drivers/clk/clk-conf.c pr_warn("clk: couldn't get assigned clock %d for %pOF\n", pr_warn 102 drivers/clk/clk-conf.c pr_warn("clk: couldn't get clock %d for %pOF\n", pr_warn 479 drivers/clk/clk-divider.c pr_warn("divider value exceeds LOWORD field\n"); pr_warn 38 drivers/clk/clk-efm32gg.c pr_warn("Failed to map address range for efm32gg,cmu node\n"); pr_warn 291 drivers/clk/clk-scpi.c pr_warn("unable to register cpufreq device"); pr_warn 1706 drivers/clk/clk-stm32f4.c pr_warn("%s: Unable to get syscfg\n", __func__); pr_warn 1882 drivers/clk/clk-stm32f4.c pr_warn("Unable to register %s clk\n", aux_clk->name); pr_warn 1225 drivers/clk/clk-stm32h7.c pr_warn("%s: Unable to get syscfg\n", __func__); pr_warn 372 drivers/clk/clk-vt8500.c pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, pr_warn 420 drivers/clk/clk-vt8500.c pr_warn("%s: rate error is %lu\n", __func__, min_err); pr_warn 431 drivers/clk/clk-vt8500.c pr_warn("%s: PLL recommended input frequency 10..200Mhz (requested %d Mhz)\n", pr_warn 487 drivers/clk/clk-vt8500.c pr_warn("%s: impossible rate %lu\n", __func__, rate); pr_warn 492 drivers/clk/clk-vt8500.c pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate, pr_warn 535 drivers/clk/clk-vt8500.c pr_warn("%s: impossible rate %lu\n", __func__, rate); pr_warn 540 drivers/clk/clk-vt8500.c pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate, pr_warn 1283 drivers/clk/clk.c pr_warn("clk: Not disabling unused clocks\n"); pr_warn 3937 drivers/clk/clk.c pr_warn("%s: unregistering prepared clock: %s\n", pr_warn 3941 drivers/clk/clk.c pr_warn("%s: unregistering protected clock: %s\n", pr_warn 342 drivers/clk/imx/clk-imx6q.c pr_warn("ccm: ldb_di%d_sel already changed from reset value: %d\n", pr_warn 954 drivers/clk/imx/clk-imx6q.c pr_warn("failed to set up CLKO: %d\n", ret); pr_warn 430 drivers/clk/imx/clk-imx6sl.c pr_warn("%s: failed to set AHB clock rate %d!\n", pr_warn 200 drivers/clk/imx/clk-imx8qxp-lpcg.c pr_warn("i.MX clk %u: register failed with %ld\n", pr_warn 133 drivers/clk/imx/clk-imx8qxp.c pr_warn("i.MX clk %u: register failed with %ld\n", pr_warn 105 drivers/clk/imx/clk-pllv4.c pr_warn("%s: unable to round rate %lu, parent rate %lu\n", pr_warn 325 drivers/clk/imx/clk-scu.c pr_warn("%s: clk unprepare failed %d\n", clk_hw_get_name(hw), pr_warn 395 drivers/clk/meson/clk-pll.c pr_warn("%s: pll did not lock, trying to restore old rate %lu\n", pr_warn 626 drivers/clk/microchip/clk-core.c pr_warn("spll: no match found\n"); pr_warn 181 drivers/clk/mvebu/clk-cpu.c pr_warn("%s: pmu-dfs base register not set, dynamic frequency scaling not available\n", pr_warn 236 drivers/clk/nxp/clk-lpc18xx-ccu.c pr_warn("%s: failed to register %s\n", __func__, branch->name); pr_warn 276 drivers/clk/nxp/clk-lpc18xx-ccu.c pr_warn("%s: failed to map address range\n", __func__); pr_warn 298 drivers/clk/nxp/clk-lpc18xx-ccu.c pr_warn("%s: failed to get clock name at idx %d\n", pr_warn 364 drivers/clk/nxp/clk-lpc18xx-cgu.c pr_warn("%s: pre/post dividers not supported\n", __func__); pr_warn 372 drivers/clk/nxp/clk-lpc18xx-cgu.c pr_warn("%s: unable to calculate rate\n", __func__); pr_warn 383 drivers/clk/nxp/clk-lpc18xx-cgu.c pr_warn("%s: pll dividers not supported\n", __func__); pr_warn 389 drivers/clk/nxp/clk-lpc18xx-cgu.c pr_warn("%s: unable to support rate %lu\n", __func__, rate); pr_warn 404 drivers/clk/nxp/clk-lpc18xx-cgu.c pr_warn("%s: pll dividers not supported\n", __func__); pr_warn 410 drivers/clk/nxp/clk-lpc18xx-cgu.c pr_warn("%s: unable to support rate %lu\n", __func__, rate); pr_warn 443 drivers/clk/nxp/clk-lpc18xx-cgu.c pr_warn("%s: unable to lock pll\n", __func__); pr_warn 611 drivers/clk/nxp/clk-lpc18xx-cgu.c pr_warn("%s: failed to register irc clk\n", __func__); pr_warn 619 drivers/clk/nxp/clk-lpc18xx-cgu.c pr_warn("%s: failed to register osc clk\n", __func__); pr_warn 626 drivers/clk/nxp/clk-lpc18xx-cgu.c pr_warn("%s: failed to register pll (%d)\n", __func__, i); pr_warn 634 drivers/clk/nxp/clk-lpc18xx-cgu.c pr_warn("%s: failed to register div %d\n", __func__, i); pr_warn 652 drivers/clk/nxp/clk-lpc18xx-cgu.c pr_warn("%s: register base clk %d failed\n", __func__, i); pr_warn 662 drivers/clk/nxp/clk-lpc18xx-cgu.c pr_warn("%s: failed to map address range\n", __func__); pr_warn 215 drivers/clk/pistachio/clk-pll.c pr_warn("%s: VCO %llu is out of range %lu..%lu\n", name, vco, pr_warn 220 drivers/clk/pistachio/clk-pll.c pr_warn("%s: PFD %llu is too low (min %lu)\n", pr_warn 223 drivers/clk/pistachio/clk-pll.c pr_warn("%s: PFD %llu is too high (max %llu)\n", pr_warn 242 drivers/clk/pistachio/clk-pll.c pr_warn("%s: changing postdiv while PLL is enabled\n", name); pr_warn 245 drivers/clk/pistachio/clk-pll.c pr_warn("%s: postdiv2 should not exceed postdiv1\n", name); pr_warn 368 drivers/clk/pistachio/clk-pll.c pr_warn("%s: VCO %u is out of range %lu..%lu\n", name, vco, pr_warn 373 drivers/clk/pistachio/clk-pll.c pr_warn("%s: PFD %u is too low (min %lu)\n", pr_warn 376 drivers/clk/pistachio/clk-pll.c pr_warn("%s: PFD %u is too high (max %u)\n", pr_warn 388 drivers/clk/pistachio/clk-pll.c pr_warn("%s: changing postdiv while PLL is enabled\n", name); pr_warn 391 drivers/clk/pistachio/clk-pll.c pr_warn("%s: postdiv2 should not exceed postdiv1\n", name); pr_warn 50 drivers/clk/pistachio/clk.c pr_warn("Failed to register clock %d: %ld\n", i, pr_warn 328 drivers/clk/renesas/clk-mstp.c pr_warn("%pOF lacks #power-domain-cells\n", np); pr_warn 147 drivers/clk/renesas/clk-r8a73a4.c pr_warn("%s: unexpected parent of %s\n", __func__, pr_warn 153 drivers/clk/renesas/clk-r8a7740.c pr_warn("%s: missing renesas,mode property\n", __func__); pr_warn 407 drivers/clk/renesas/clk-rcar-gen2.c pr_warn("%pOF: failed to obtain mode pins from RST\n", np); pr_warn 150 drivers/clk/rockchip/clk-cpu.c pr_warn("%s: limiting alt-divider %lu to %d\n", pr_warn 226 drivers/clk/rockchip/clk-pll.c pr_warn("%s: pll update unsuccessful, trying to restore old params\n", pr_warn 320 drivers/clk/rockchip/clk-pll.c pr_warn("%s: parent of %s not available\n", pr_warn 459 drivers/clk/rockchip/clk-pll.c pr_warn("%s: pll update unsuccessful, trying to restore old params\n", pr_warn 705 drivers/clk/rockchip/clk-pll.c pr_warn("%s: pll update unsuccessful, trying to restore old params\n", pr_warn 799 drivers/clk/rockchip/clk-pll.c pr_warn("%s: parent of %s not available\n", pr_warn 943 drivers/clk/rockchip/clk-pll.c pr_warn("%s: Unknown pll type for pll clk %s\n", pr_warn 462 drivers/clk/rockchip/clk-rk3036.c pr_warn("%s: could not register clock usb480m: %ld\n", pr_warn 837 drivers/clk/rockchip/clk-rk3188.c pr_warn("%s: could not reparent aclk_cpu_pre to gpll\n", pr_warn 842 drivers/clk/rockchip/clk-rk3188.c pr_warn("%s: missing clocks to reparent aclk_cpu_pre to gpll\n", pr_warn 309 drivers/clk/rockchip/clk.c pr_warn("%s: could not find %s as parent of %s, rate changes may not work\n", pr_warn 1380 drivers/clk/samsung/clk-pll.c pr_warn("%s: Unknown pll type for pll clk %s\n", pr_warn 246 drivers/clk/samsung/clk-s3c2412.c pr_warn("cannot register restart handler, %d\n", ret); pr_warn 418 drivers/clk/samsung/clk-s3c2443.c pr_warn("cannot register restart handler, %d\n", ret); pr_warn 517 drivers/clk/tegra/clk-emc.c pr_warn("%s: no memory timings registered\n", __func__); pr_warn 522 drivers/clk/tegra/clk-emc.c pr_warn("%s: couldn't find node for EMC driver\n", __func__); pr_warn 670 drivers/clk/tegra/clk-tegra210.c pr_warn("boot misc%d 0x%x: expected 0x%x\n", pr_warn 672 drivers/clk/tegra/clk-tegra210.c pr_warn(" (comparison mask = 0x%x)\n", mask); pr_warn 712 drivers/clk/tegra/clk-tegra210.c pr_warn("%s already enabled. Postponing set full defaults\n", pr_warn 767 drivers/clk/tegra/clk-tegra210.c pr_warn("PLL_A boot enabled with IDDQ set\n"); pr_warn 771 drivers/clk/tegra/clk-tegra210.c pr_warn("PLL_A already enabled. Postponing set full defaults\n"); pr_warn 832 drivers/clk/tegra/clk-tegra210.c pr_warn("PLL_D already enabled. Postponing set full defaults\n"); pr_warn 874 drivers/clk/tegra/clk-tegra210.c pr_warn("plldss boot enabled with IDDQ set\n"); pr_warn 907 drivers/clk/tegra/clk-tegra210.c pr_warn("%s already enabled. Postponing set full defaults\n", pr_warn 993 drivers/clk/tegra/clk-tegra210.c pr_warn("pllre boot base 0x%x : expected 0x%x\n", pr_warn 995 drivers/clk/tegra/clk-tegra210.c pr_warn("(comparison mask = 0x%x)\n", pr_warn 1009 drivers/clk/tegra/clk-tegra210.c pr_warn("unexpected IDDQ bit set for enabled clock\n"); pr_warn 1018 drivers/clk/tegra/clk-tegra210.c pr_warn("PLL_RE already enabled. Postponing set full defaults\n"); pr_warn 1120 drivers/clk/tegra/clk-tegra210.c pr_warn("PLL_X already enabled. Postponing set full defaults\n"); pr_warn 1176 drivers/clk/tegra/clk-tegra210.c pr_warn("PLL_MB already enabled. Postponing set full defaults\n"); pr_warn 1233 drivers/clk/tegra/clk-tegra210.c pr_warn("PLL_P already enabled. Postponing set full defaults\n"); pr_warn 1296 drivers/clk/tegra/clk-tegra210.c pr_warn("PLL_U already enabled. Postponing set full defaults\n"); pr_warn 3044 drivers/clk/tegra/clk-tegra210.c pr_warn("clock %u not found\n", init->clk_id); pr_warn 81 drivers/clk/ti/apll.c pr_warn("clock: %s failed transition to '%s'\n", pr_warn 289 drivers/clk/ti/apll.c pr_warn("%s failed to transition to locked\n", pr_warn 158 drivers/clk/ti/clk.c pr_warn("Bad number of tags on %s\n", pr_warn 183 drivers/clk/ti/clk.c pr_warn("Bad tag in %s at %d: %s\n", pr_warn 206 drivers/clk/ti/clk.c pr_warn("missing clkctrl nodes, please update your dts.\n"); pr_warn 211 drivers/clk/ti/clk.c pr_warn("failed to lookup clock node %s, ret=%ld\n", pr_warn 147 drivers/clk/ti/clockdomain.c pr_warn("can't setup clkdm for basic clk %s\n", pr_warn 327 drivers/clk/ti/divider.c pr_warn("divider value exceeds LOWORD field\n"); pr_warn 212 drivers/clk/ti/fapll.c pr_warn("FAPLL main divider rates unsupported\n"); pr_warn 39 drivers/clk/uniphier/clk-uniphier-gate.c pr_warn("failed to disable clk\n"); pr_warn 48 drivers/clk/uniphier/clk-uniphier-gate.c pr_warn("is_enabled() may return wrong result\n"); pr_warn 97 drivers/clk/versatile/clk-sp810.c pr_warn("Failed to obtain parent clocks for SP810!\n"); pr_warn 580 drivers/clk/zte/clk-zx296718.c pr_warn("top clk %s init error!\n", name); pr_warn 591 drivers/clk/zte/clk-zx296718.c pr_warn("top clk %s init error!\n", name); pr_warn 603 drivers/clk/zte/clk-zx296718.c pr_warn("top clk %s init error!\n", name); pr_warn 615 drivers/clk/zte/clk-zx296718.c pr_warn("top clk %s init error!\n", name); pr_warn 627 drivers/clk/zte/clk-zx296718.c pr_warn("top clk %s init error!\n", name); pr_warn 770 drivers/clk/zte/clk-zx296718.c pr_warn("lsp0 clk %s init error!\n", name); pr_warn 782 drivers/clk/zte/clk-zx296718.c pr_warn("lsp0 clk %s init error!\n", name); pr_warn 794 drivers/clk/zte/clk-zx296718.c pr_warn("lsp0 clk %s init error!\n", name); pr_warn 876 drivers/clk/zte/clk-zx296718.c pr_warn("lsp1 clk %s init error!\n", name); pr_warn 888 drivers/clk/zte/clk-zx296718.c pr_warn("lsp1 clk %s init error!\n", name); pr_warn 900 drivers/clk/zte/clk-zx296718.c pr_warn("lsp1 clk %s init error!\n", name); pr_warn 991 drivers/clk/zte/clk-zx296718.c pr_warn("audio clk %s init error!\n", name); pr_warn 1003 drivers/clk/zte/clk-zx296718.c pr_warn("audio clk %s init error!\n", name); pr_warn 1015 drivers/clk/zte/clk-zx296718.c pr_warn("audio clk %s init error!\n", name); pr_warn 1027 drivers/clk/zte/clk-zx296718.c pr_warn("audio clk %s init error!\n", name); pr_warn 153 drivers/clk/zynq/clkc.c pr_warn("%s: FCLK%u enable failed\n", __func__, pr_warn 254 drivers/clk/zynq/clkc.c pr_warn("ps_clk frequency not specified, using 33 MHz.\n"); pr_warn 505 drivers/clk/zynq/clkc.c pr_warn("%s: trace clk enable failed\n", __func__); pr_warn 508 drivers/clk/zynq/clkc.c pr_warn("%s: debug APB clk enable failed\n", __func__); pr_warn 111 drivers/clocksource/acpi_pm.c pr_warn("* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,\n" pr_warn 125 drivers/clocksource/acpi_pm.c pr_warn("* The chipset may have PM-Timer Bug. Due to workarounds for a bug,\n" pr_warn 110 drivers/clocksource/arc_timer.c pr_warn("Global-64-bit-Ctr clocksource not detected\n"); pr_warn 168 drivers/clocksource/arc_timer.c pr_warn("Local-64-bit-Ctr clocksource not detected\n"); pr_warn 174 drivers/clocksource/arc_timer.c pr_warn("Local-64-bit-Ctr not usable in SMP\n"); pr_warn 597 drivers/clocksource/arm_arch_timer.c pr_warn("Can't enable workaround for %s (clashes with %s\n)", pr_warn 857 drivers/clocksource/arm_arch_timer.c pr_warn("WARNING: Invalid trigger for IRQ%d, assuming level low\n", irq); pr_warn 858 drivers/clocksource/arm_arch_timer.c pr_warn("WARNING: Please fix your firmware\n"); pr_warn 904 drivers/clocksource/arm_arch_timer.c pr_warn("frequency not available\n"); pr_warn 1252 drivers/clocksource/arm_arch_timer.c pr_warn("multiple nodes in dt, skipping\n"); pr_warn 1569 drivers/clocksource/arm_arch_timer.c pr_warn("already initialized, skipping\n"); pr_warn 267 drivers/clocksource/arm_global_timer.c pr_warn("global-timer: non support for this cpu version.\n"); pr_warn 273 drivers/clocksource/arm_global_timer.c pr_warn("global-timer: unable to parse irq\n"); pr_warn 279 drivers/clocksource/arm_global_timer.c pr_warn("global-timer: invalid base address\n"); pr_warn 289 drivers/clocksource/arm_global_timer.c pr_warn("global-timer: clk not found\n"); pr_warn 297 drivers/clocksource/arm_global_timer.c pr_warn("global-timer: can't allocate memory\n"); pr_warn 305 drivers/clocksource/arm_global_timer.c pr_warn("global-timer: can't register interrupt %d (%d)\n", pr_warn 34 drivers/clocksource/armv7m_systick.c pr_warn("system-timer: invalid base address\n"); pr_warn 80 drivers/clocksource/armv7m_systick.c pr_warn("ARM System timer register failed (%d)\n", ret); pr_warn 46 drivers/clocksource/dw_apb_timer_of.c pr_warn("pclk for %pOFn is present, but could not be activated\n", pr_warn 62 drivers/clocksource/h8300_timer8.c pr_warn("delta out of range\n"); pr_warn 181 drivers/clocksource/mips-gic-timer.c pr_warn("Unable to register clocksource\n"); pr_warn 193 drivers/clocksource/mips-gic-timer.c pr_warn("No DT definition\n"); pr_warn 225 drivers/clocksource/mips-gic-timer.c pr_warn("Unable to register clock notifier\n"); pr_warn 87 drivers/clocksource/mps2-timer.c pr_warn("spurious interrupt\n"); pr_warn 68 drivers/clocksource/scx200_hrt.c pr_warn("unable to lock timer region\n"); pr_warn 345 drivers/clocksource/timer-cadence-ttc.c pr_warn("Unable to register clock notifier.\n"); pr_warn 426 drivers/clocksource/timer-cadence-ttc.c pr_warn("Unable to register clock notifier.\n"); pr_warn 195 drivers/clocksource/timer-digicolor.c pr_warn("request of timer irq %d failed (%d)\n", irq, ret); pr_warn 189 drivers/clocksource/timer-integrator-ap.c pr_warn("Failed to read property\n"); pr_warn 209 drivers/clocksource/timer-integrator-ap.c pr_warn("Failed to read property\n"); pr_warn 199 drivers/clocksource/timer-meson6.c pr_warn("failed to setup irq %d\n", irq); pr_warn 89 drivers/clocksource/timer-riscv.c pr_warn("Not valid hartid for node [%pOF] error = [%d]\n", pr_warn 96 drivers/clocksource/timer-riscv.c pr_warn("Invalid cpuid for hartid [%d]\n", hartid); pr_warn 394 drivers/clocksource/timer-ti-dm.c pr_warn("%s: Please use omap_dm_timer_request_by_node()\n", pr_warn 391 drivers/connector/cn_proc.c pr_warn("cn_proc failed to register\n"); pr_warn 859 drivers/cpufreq/acpi-cpufreq.c pr_warn(FW_WARN "P-state 0 is not max freq\n"); pr_warn 49 drivers/cpufreq/armada-8k-cpufreq.c pr_warn("Failed to get cpu%d device\n", cpu); pr_warn 55 drivers/cpufreq/armada-8k-cpufreq.c pr_warn("Cannot get clock for CPU %d\n", cpu); pr_warn 325 drivers/cpufreq/cpufreq-nforce2.c pr_warn("cpu_khz not set, can't calculate multiplier!\n"); pr_warn 495 drivers/cpufreq/cpufreq.c pr_warn("CPU%u: Fast frequency switching not enabled\n", pr_warn 1442 drivers/cpufreq/cpufreq.c pr_warn("%s: CPU%d: Running at unlisted freq: %u KHz\n", pr_warn 1453 drivers/cpufreq/cpufreq.c pr_warn("%s: CPU%d: Unlisted initial frequency changed to: %u KHz\n", pr_warn 2194 drivers/cpufreq/cpufreq.c pr_warn("Can't use %s governor as dynamic switching is disallowed. Fallback to %s governor\n", pr_warn 183 drivers/cpufreq/elanfreq.c pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n"); pr_warn 308 drivers/cpufreq/freq_table.c pr_warn("Duplicate freq-table entries: %u\n", pr_warn 121 drivers/cpufreq/ia64-acpi-cpufreq.c pr_warn("get performance failed with error %d\n", ret); pr_warn 165 drivers/cpufreq/ia64-acpi-cpufreq.c pr_warn("Transition failed with error %d\n", ret); pr_warn 1124 drivers/cpufreq/intel_pstate.c pr_warn("Failed to update freq constraint: CPU%d\n", i); pr_warn 320 drivers/cpufreq/mediatek-cpufreq.c pr_warn("cpu clk for cpu%d not ready, retry.\n", cpu); pr_warn 331 drivers/cpufreq/mediatek-cpufreq.c pr_warn("intermediate clk for cpu%d not ready, retry.\n", pr_warn 344 drivers/cpufreq/mediatek-cpufreq.c pr_warn("proc regulator for cpu%d not ready, retry.\n", pr_warn 367 drivers/cpufreq/mediatek-cpufreq.c pr_warn("no OPP table for cpu%d\n", cpu); pr_warn 49 drivers/cpufreq/mvebu-cpufreq.c pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n"); pr_warn 161 drivers/cpufreq/omap-cpufreq.c pr_warn("%s: unable to get the MPU device\n", __func__); pr_warn 167 drivers/cpufreq/omap-cpufreq.c pr_warn("%s: unable to get MPU regulator\n", __func__); pr_warn 175 drivers/cpufreq/omap-cpufreq.c pr_warn("%s: physical regulator not present for MPU\n", pr_warn 146 drivers/cpufreq/p4-clockmod.c pr_warn("Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.\n"); pr_warn 140 drivers/cpufreq/pmac64-cpufreq.c pr_warn("Timeout in clock slewing !\n"); pr_warn 268 drivers/cpufreq/pmac64-cpufreq.c pr_warn("pfunc switch error %d\n", rc); pr_warn 284 drivers/cpufreq/pmac64-cpufreq.c pr_warn("Timeout in clock slewing !\n"); pr_warn 585 drivers/cpufreq/pmac64-cpufreq.c pr_warn("No low frequency mode available on this model !\n"); pr_warn 183 drivers/cpufreq/powernow-k6.c pr_warn("unknown frequency %u, cannot determine current multiplier\n", pr_warn 185 drivers/cpufreq/powernow-k6.c pr_warn("use module parameters max_multiplier and bus_frequency\n"); pr_warn 428 drivers/cpufreq/powernow-k7.c pr_warn("ACPI perflib can not be used on this platform\n"); pr_warn 547 drivers/cpufreq/powernow-k7.c pr_warn("SGTC too large %d\n", sgtc); pr_warn 569 drivers/cpufreq/powernow-k7.c pr_warn("%s laptop with broken PST tables in BIOS detected\n", pr_warn 571 drivers/cpufreq/powernow-k7.c pr_warn("You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n"); pr_warn 572 drivers/cpufreq/powernow-k7.c pr_warn("cpufreq scaling has been disabled as a result of this\n"); pr_warn 607 drivers/cpufreq/powernow-k7.c pr_warn("can not determine bus frequency\n"); pr_warn 567 drivers/cpufreq/powernow-k8.c pr_warn("Only %d pstates usable (use ACPI driver for full range\n", pr_warn 1163 drivers/cpufreq/powernow-k8.c pr_warn("WTF driver: %s\n", cur_drv); pr_warn 1168 drivers/cpufreq/powernow-k8.c pr_warn("This CPU is not supported anymore, using acpi-cpufreq instead.\n"); pr_warn 241 drivers/cpufreq/powernv-cpufreq.c pr_warn("power-mgt node not found\n"); pr_warn 246 drivers/cpufreq/powernv-cpufreq.c pr_warn("ibm,pstate-min node not found\n"); pr_warn 251 drivers/cpufreq/powernv-cpufreq.c pr_warn("ibm,pstate-max node not found\n"); pr_warn 257 drivers/cpufreq/powernv-cpufreq.c pr_warn("ibm,pstate-nominal not found\n"); pr_warn 286 drivers/cpufreq/powernv-cpufreq.c pr_warn("ibm,pstate-ids not found\n"); pr_warn 293 drivers/cpufreq/powernv-cpufreq.c pr_warn("ibm,pstate-frequencies-mhz not found\n"); pr_warn 298 drivers/cpufreq/powernv-cpufreq.c pr_warn("Entries in ibm,pstate-ids and " pr_warn 304 drivers/cpufreq/powernv-cpufreq.c pr_warn("No PStates found\n"); pr_warn 364 drivers/cpufreq/powernv-cpufreq.c pr_warn("PState id 0x%x outside of PState table, reporting nominal id 0x%x instead\n", pr_warn 604 drivers/cpufreq/powernv-cpufreq.c pr_warn("CPU Frequency could be throttled\n"); pr_warn 955 drivers/cpufreq/powernv-cpufreq.c pr_warn("CPU frequency is throttled for duration\n"); pr_warn 83 drivers/cpufreq/ppc_cbe_cpufreq_pmi.c pr_warn("cpufreq policy not found cpu%d\n", cpu); pr_warn 92 drivers/cpufreq/ppc_cbe_cpufreq_pmi.c pr_warn("Failed to update freq constraint: %d\n", ret); pr_warn 68 drivers/cpufreq/s3c2440-cpufreq.c pr_warn("%s: armclk > fclk\n", __func__); pr_warn 457 drivers/cpufreq/speedstep-lib.c pr_warn("frequency transition measured seems out of range (%u nSec), falling back to a safe one of %u nSec\n", pr_warn 259 drivers/cpuidle/cpuidle-powernv.c pr_warn("cpuidle-powernv: array sizes don't match for %s and %s\n", pr_warn 276 drivers/cpuidle/cpuidle-powernv.c pr_warn("cpuidle-powernv : Only Snooze is available\n"); pr_warn 288 drivers/cpuidle/cpuidle-powernv.c pr_warn("cpuidle-powernv: discovered idle states more than allowed"); pr_warn 64 drivers/cpuidle/cpuidle-psci.c pr_warn("%pOF missing arm,psci-suspend-param property\n", np); pr_warn 69 drivers/cpuidle/cpuidle-psci.c pr_warn("Invalid PSCI power state %#x\n", *state); pr_warn 189 drivers/cpuidle/dt_idle_states.c pr_warn("%pOF idle state not valid, bailing out\n", pr_warn 196 drivers/cpuidle/dt_idle_states.c pr_warn("State index reached static CPU idle driver states array size\n"); pr_warn 3618 drivers/crypto/caam/caamalg.c pr_warn("%s alg registration failed\n", pr_warn 3670 drivers/crypto/caam/caamalg.c pr_warn("%s alg registration failed\n", pr_warn 2656 drivers/crypto/caam/caamalg_qi.c pr_warn("%s alg registration failed\n", pr_warn 2032 drivers/crypto/caam/caamhash.c pr_warn("%s alg allocation failed\n", pr_warn 2039 drivers/crypto/caam/caamhash.c pr_warn("%s alg registration failed: %d\n", pr_warn 2053 drivers/crypto/caam/caamhash.c pr_warn("%s alg allocation failed\n", alg->driver_name); pr_warn 2059 drivers/crypto/caam/caamhash.c pr_warn("%s alg registration failed: %d\n", pr_warn 210 drivers/crypto/ccp/ccp-crypto-aes-xts.c pr_warn("could not load fallback driver xts(aes)\n"); pr_warn 344 drivers/crypto/ccp/ccp-crypto-sha.c pr_warn("could not load driver %s need for HMAC support\n", pr_warn 235 drivers/crypto/chelsio/chtls/chtls_io.c pr_warn("MAX IVs in PAGE exceeded %d\n", number_of_ivs); pr_warn 898 drivers/crypto/nx/nx-842-powernv.c pr_warn("Firmware doesn't support NX initialization\n"); pr_warn 302 drivers/crypto/nx/nx-842.c pr_warn("internal error, ignore is set %x\n", ignore); pr_warn 653 drivers/crypto/omap-aes.c pr_warn("could not load aes driver for encrypting IV\n"); pr_warn 368 drivers/dma/dmatest.c pr_warn("%s: srcbuf[0x%x] overwritten! Expected %02x, got %02x\n", pr_warn 372 drivers/dma/dmatest.c pr_warn("%s: dstbuf[0x%x] not copied! Expected %02x, got %02x\n", pr_warn 375 drivers/dma/dmatest.c pr_warn("%s: dstbuf[0x%x] was copied! Expected %02x, got %02x\n", pr_warn 378 drivers/dma/dmatest.c pr_warn("%s: dstbuf[0x%x] mismatch! Expected %02x, got %02x\n", pr_warn 410 drivers/dma/dmatest.c pr_warn("%s: %u errors suppressed\n", pr_warn 957 drivers/dma/dmatest.c pr_warn("No memory for %s-%s%u\n", pr_warn 970 drivers/dma/dmatest.c pr_warn("Failed to create thread %s-%s%u\n", pr_warn 995 drivers/dma/dmatest.c pr_warn("No memory for %s\n", dma_chan_name(chan)); pr_warn 478 drivers/dma/nbpfaxi.c pr_warn("%s(): invalid bus width %u\n", __func__, width); pr_warn 1587 drivers/dma/ti/omap-dma.c pr_warn("OMAP-DMA: failed to register slave DMA engine device: %d\n", pr_warn 1602 drivers/dma/ti/omap-dma.c pr_warn("OMAP-DMA: failed to register DMA controller\n"); pr_warn 3630 drivers/edac/amd64_edac.c pr_warn("%s(): Unable to create PCI control\n", __func__); pr_warn 3631 drivers/edac/amd64_edac.c pr_warn("%s(): PCI error report via EDAC not set\n", __func__); pr_warn 621 drivers/edac/armada_xp_edac.c pr_warn("Aramda XP EDAC drivers fail to register\n"); pr_warn 540 drivers/edac/fsl_ddr_edac.c pr_warn("%s: No ECC DIMMs discovered\n", __func__); pr_warn 709 drivers/edac/mpc85xx_edac.c pr_warn(EDAC_MOD_STR "drivers fail to register\n"); pr_warn 511 drivers/firmware/arm_sdei.c pr_warn("Event %u not registered\n", event_num); pr_warn 611 drivers/firmware/arm_sdei.c pr_warn("Event %u already registered\n", event_num); pr_warn 619 drivers/firmware/arm_sdei.c pr_warn("Failed to create event %u: %d\n", event_num, pr_warn 636 drivers/firmware/arm_sdei.c pr_warn("Failed to register event %u: %d\n", event_num, pr_warn 821 drivers/firmware/arm_sdei.c pr_warn("Failed to re-register shared events...\n"); pr_warn 829 drivers/firmware/arm_sdei.c pr_warn("Failed to re-register CPU hotplug notifier...\n"); pr_warn 967 drivers/firmware/arm_sdei.c pr_warn("missing \"method\" property\n"); pr_warn 979 drivers/firmware/arm_sdei.c pr_warn("invalid \"method\" property: %s\n", method); pr_warn 1017 drivers/firmware/arm_sdei.c pr_warn("Conflicting SDEI version detected.\n"); pr_warn 1035 drivers/firmware/arm_sdei.c pr_warn("Failed to register CPU PM notifier...\n"); pr_warn 1041 drivers/firmware/arm_sdei.c pr_warn("Failed to register reboot notifier...\n"); pr_warn 1048 drivers/firmware/arm_sdei.c pr_warn("Failed to register CPU hotplug notifier...\n"); pr_warn 59 drivers/firmware/broadcom/bcm47xx_nvram.c pr_warn("nvram already initialized\n"); pr_warn 79 drivers/firmware/broadcom/bcm47xx_sprom.c pr_warn("can not parse nvram name %s%s%s with value %s got %i\n", \ pr_warn 107 drivers/firmware/broadcom/bcm47xx_sprom.c pr_warn("can not parse nvram name %s%s with value %s got %i\n", pr_warn 128 drivers/firmware/broadcom/bcm47xx_sprom.c pr_warn("can not parse nvram name %s%s with value %s got %i\n", pr_warn 152 drivers/firmware/broadcom/bcm47xx_sprom.c pr_warn("Can not parse mac address: %s\n", buf); pr_warn 167 drivers/firmware/broadcom/bcm47xx_sprom.c pr_warn("alpha2 is too long %s\n", buf); pr_warn 609 drivers/firmware/broadcom/bcm47xx_sprom.c pr_warn("Unable to fill SPROM for given bustype.\n"); pr_warn 684 drivers/firmware/broadcom/bcm47xx_sprom.c pr_warn("Unable to fill SPROM for given bustype.\n"); pr_warn 712 drivers/firmware/broadcom/bcm47xx_sprom.c pr_warn("Failed to register ssb SPROM handler\n"); pr_warn 717 drivers/firmware/broadcom/bcm47xx_sprom.c pr_warn("Failed to register bcma SPROM handler\n"); pr_warn 397 drivers/firmware/dmi_scan.c pr_warn(FW_BUG "Too many DIMM entries in SMBIOS table\n"); pr_warn 95 drivers/firmware/efi/arm-init.c pr_warn("Unable to map EFI system table.\n"); pr_warn 112 drivers/firmware/efi/arm-init.c pr_warn("Warning: EFI system table version %d.%02d, expected 2.00 or greater\n", pr_warn 136 drivers/firmware/efi/arm-init.c pr_warn("Unable to map EFI config table array.\n"); pr_warn 75 drivers/firmware/efi/arm-runtime.c pr_warn(" EFI remap %pa: failed to create mapping (%d)\n", pr_warn 167 drivers/firmware/efi/capsule.c pr_warn("Capsule update raced with reboot, aborting.\n"); pr_warn 87 drivers/firmware/efi/efi.c pr_warn("need at least one option\n"); pr_warn 233 drivers/firmware/efi/efi.c pr_warn("efivar_ssdt: name too long: %s\n", str); pr_warn 258 drivers/firmware/efi/esrt.c pr_warn("ESRT header is not in the memory map.\n"); pr_warn 36 drivers/firmware/efi/memattr.c pr_warn("Unexpected EFI Memory Attributes table version %d\n", pr_warn 65 drivers/firmware/efi/memattr.c pr_warn("Entry type should be RuntimeServiceCode/Data\n"); pr_warn 70 drivers/firmware/efi/memattr.c pr_warn("Entry attributes invalid: RO and XP bits both cleared\n"); pr_warn 84 drivers/firmware/efi/memattr.c pr_warn("Entry address region misaligned\n"); pr_warn 107 drivers/firmware/efi/memattr.c pr_warn("Entry covers multiple EFI memory map regions\n"); pr_warn 112 drivers/firmware/efi/memattr.c pr_warn("Entry type deviates from EFI memory map region type\n"); pr_warn 121 drivers/firmware/efi/memattr.c pr_warn("No matching entry found in the EFI memory map\n"); pr_warn 418 drivers/firmware/efi/runtime-wrappers.c pr_warn("failed to invoke the reset_system() runtime service:\n" pr_warn 67 drivers/firmware/efi/tpm.c pr_warn(FW_BUG "TPM Final Events table missing or invalid\n"); pr_warn 68 drivers/firmware/google/framebuffer-coreboot.c pr_warn("coreboot: could not register framebuffer\n"); pr_warn 238 drivers/firmware/psci/psci.c pr_warn("missing \"method\" property\n"); pr_warn 247 drivers/firmware/psci/psci.c pr_warn("invalid \"method\" property: %s\n", method); pr_warn 376 drivers/firmware/psci/psci.c pr_warn("MIGRATE_INFO_UP_CPU reported invalid physical ID (0x%lx)\n", pr_warn 51 drivers/firmware/psci/psci_checker.c pr_warn("Missing PSCI operations, aborting tests\n"); pr_warn 67 drivers/firmware/psci/psci_checker.c pr_warn("UP Trusted OS resides on no online CPU\n"); pr_warn 286 drivers/firmware/psci/psci_checker.c pr_warn("Failed to set suspend thread scheduler on CPU %d\n", pr_warn 355 drivers/firmware/psci/psci_checker.c pr_warn("Failed to set suspend thread scheduler on CPU %d\n", pr_warn 400 drivers/firmware/psci/psci_checker.c pr_warn("cpuidle not available on CPU %d, ignoring\n", pr_warn 490 drivers/firmware/psci/psci_checker.c pr_warn("Could not start suspend tests on any CPU\n"); pr_warn 591 drivers/firmware/qemu_fw_cfg.c pr_warn("fw_cfg: failed to write vmcoreinfo"); pr_warn 318 drivers/firmware/stratix10-svc.c pr_warn("it shouldn't happen\n"); pr_warn 416 drivers/firmware/stratix10-svc.c pr_warn("it shouldn't happen\n"); pr_warn 459 drivers/firmware/stratix10-svc.c pr_warn("it shouldn't happen\n"); pr_warn 496 drivers/firmware/stratix10-svc.c pr_warn("it shouldn't happen\n"); pr_warn 260 drivers/firmware/xilinx/zynqmp.c pr_warn("%s missing \"method\" property\n", __func__); pr_warn 269 drivers/firmware/xilinx/zynqmp.c pr_warn("%s Invalid \"method\" property: %s\n", pr_warn 706 drivers/fpga/altera-cvp.c pr_warn("Can't create sysfs chkcfg file\n"); pr_warn 462 drivers/gpio/gpio-viperboard.c pr_warn("invalid gpioa_freq (%d)\n", gpioa_freq); pr_warn 504 drivers/gpio/gpio-winbond.c pr_warn("GPIO1 pins were connected to something else (%.2x), fixing\n", pr_warn 518 drivers/gpio/gpio-winbond.c pr_warn("disabling GPIO2.5 and GPIO2.6 as I2C is enabled\n"); pr_warn 534 drivers/gpio/gpio-winbond.c pr_warn("enabled GPIO%u share pins with active %s\n", pr_warn 537 drivers/gpio/gpio-winbond.c pr_warn("disabling GPIO%u as %s is enabled\n", pr_warn 619 drivers/gpio/gpio-winbond.c pr_warn("unknown ports (%lx) enabled in GPIO ports bitmask\n", pr_warn 167 drivers/gpio/gpiolib-of.c pr_warn("%s GPIO handle specifies active low - ignored\n", pr_warn 215 drivers/gpio/gpiolib-of.c pr_warn("%s GPIO handle specifies active low - ignored\n", pr_warn 610 drivers/gpio/gpiolib-of.c pr_warn("GPIO line %d (%pOFn): no hogging state specified, bailing out\n", pr_warn 468 drivers/gpio/gpiolib-sysfs.c pr_warn("%s: invalid GPIO %ld\n", __func__, gpio); pr_warn 515 drivers/gpio/gpiolib-sysfs.c pr_warn("%s: invalid GPIO %ld\n", __func__, gpio); pr_warn 676 drivers/gpio/gpiolib-sysfs.c pr_warn("%s: invalid GPIO\n", __func__); pr_warn 703 drivers/gpio/gpiolib-sysfs.c pr_warn("%s: invalid GPIO\n", __func__); pr_warn 2735 drivers/gpio/gpiolib.c pr_warn("%s: invalid GPIO (errorpointer)\n", func); pr_warn 2739 drivers/gpio/gpiolib.c pr_warn("%s: invalid GPIO (no device)\n", func); pr_warn 147 drivers/gpio/gpiolib.h pr_warn("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?", \ pr_warn 77 drivers/gpu/drm/amd/amdgpu/amdgpu_afmt.c pr_warn("Calculated ACR N value is too small. You may experience audio problems.\n"); pr_warn 79 drivers/gpu/drm/amd/amdgpu/amdgpu_afmt.c pr_warn("Calculated ACR N value is too large. You may experience audio problems.\n"); pr_warn 234 drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c pr_warn("Error initializing AMDGPU %s PMUs.\n", pmu_type_name); pr_warn 246 drivers/gpu/drm/amd/amdgpu/amdgpu_test.c pr_warn("Error while testing BO move\n"); pr_warn 996 drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c pr_warn("amdgpu: No suitable DMA available\n"); pr_warn 1122 drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c pr_warn("amdgpu: No suitable DMA available\n"); pr_warn 465 drivers/gpu/drm/amd/amdkfd/kfd_crat.c pr_warn("Unknown subtype %d in CRAT\n", pr_warn 497 drivers/gpu/drm/amd/amdkfd/kfd_crat.c pr_warn("Error device list should be empty\n"); pr_warn 761 drivers/gpu/drm/amd/amdkfd/kfd_crat.c pr_warn("CRAT table not found\n"); pr_warn 959 drivers/gpu/drm/amd/amdkfd/kfd_crat.c pr_warn("DSDT table not found for OEM information\n"); pr_warn 280 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_warn("Can't create new usermode queue because %d queues were already created\n", pr_warn 464 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_warn("Resetting wave fronts (nocpsch) on dev %p\n", pr_warn 1090 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_warn("Can't create new kernel queue because %d queues were already created\n", pr_warn 1139 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_warn("Can't create new usermode queue because %d queues were already created\n", pr_warn 1622 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_warn("Resetting wave fronts (cpsch) on dev %p\n", dqm->dev); pr_warn 190 drivers/gpu/drm/amd/amdkfd/kfd_events.c pr_warn("Signal event wasn't created because limit was reached\n"); pr_warn 198 drivers/gpu/drm/amd/amdkfd/kfd_events.c pr_warn("Signal event wasn't created because out of kernel memory\n"); pr_warn 208 drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c pr_warn("Runlist is getting oversubscribed. Expect reduced ROCm performance.\n"); pr_warn 119 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_warn("Could not create procfs proc folder"); pr_warn 307 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_warn("Creating procfs kobject failed"); pr_warn 314 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_warn("Creating procfs pid directory failed"); pr_warn 323 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_warn("Creating pasid for pid %d failed", pr_warn 1456 drivers/gpu/drm/amd/amdkfd/kfd_topology.c pr_warn("Invalid NUMA Node. Use online CPU mask\n"); pr_warn 1360 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_warn("set BACO feature enabled failed, return %d\n", ret); pr_warn 213 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_warn("Unsupported SMU clk: %d\n", index); pr_warn 244 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_warn("Unsupported SMU table: %d\n", index); pr_warn 260 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_warn("Unsupported SMU power source: %d\n", index); pr_warn 277 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_warn("Unsupported SMU power source: %d\n", profile); pr_warn 49 drivers/gpu/drm/amd/powerplay/hwmgr/pp_psm.c pr_warn("Please check whether power state management is supported on this asic\n"); pr_warn 597 drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c pr_warn("GPU over temperature range detected on PCIe %d:%d.%d!\n", pr_warn 602 drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c pr_warn("GPU under temperature range detected on PCIe %d:%d.%d!\n", pr_warn 607 drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c pr_warn("GPU Critical Temperature Fault detected on PCIe %d:%d.%d!\n", pr_warn 613 drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c pr_warn("GPU over temperature range detected on PCIe %d:%d.%d!\n", pr_warn 618 drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c pr_warn("GPU under temperature range detected on PCIe %d:%d.%d!\n", pr_warn 623 drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c pr_warn("GPU Critical Temperature Fault detected on PCIe %d:%d.%d!\n", pr_warn 4793 drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c pr_warn("max sclk supported by vbios is %d\n", pr_warn 4844 drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c pr_warn("max mclk supported by vbios is %d\n", pr_warn 40 drivers/gpu/drm/amd/powerplay/inc/pp_debug.h pr_warn("%s\n", msg); \ pr_warn 48 drivers/gpu/drm/amd/powerplay/inc/pp_debug.h pr_warn("%s\n", msg); \ pr_warn 309 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_warn("SMU driver if version not matched\n"); pr_warn 1536 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_warn("GPU over temperature range detected on PCIe %d:%d.%d!\n", pr_warn 1542 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_warn("GPU under temperature range detected on PCIe %d:%d.%d!\n", pr_warn 1548 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_warn("GPU under temperature range unknown src id (%d), detected on PCIe %d:%d.%d!\n", pr_warn 1832 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_warn("Unknown asic for smu11\n"); pr_warn 178 drivers/gpu/drm/amd/powerplay/smu_v12_0.c pr_warn("SMU driver if version not matched\n"); pr_warn 410 drivers/gpu/drm/amd/powerplay/smu_v12_0.c pr_warn("Unknown asic for smu12\n"); pr_warn 776 drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c pr_warn("CAC Leakage Table does not exist, using vddc.\n"); pr_warn 787 drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c pr_warn("Index from SCLK/VDDC Dependency Table exceeds the CAC Leakage Table index, using maximum index from CAC table.\n"); pr_warn 803 drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c pr_warn("Index from SCLK/VDDC Dependency Table exceeds the CAC Leakage Table index in second look up, using maximum index from CAC table."); pr_warn 812 drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c pr_warn("Unable to get std_vddc from SCLK/VDDC Dependency Table, using vddc.\n"); pr_warn 2338 drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c pr_warn("can't get the offset of type %x member %x\n", type, member); pr_warn 2363 drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c pr_warn("can't get the mac of %x\n", value); pr_warn 300 drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c pr_warn("Unknown V.I. Device ID.\n"); pr_warn 545 drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c pr_warn("CAC Leakage Table does not exist, using vddc.\n"); pr_warn 561 drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c pr_warn("Index from SCLK/VDDC Dependency Table exceeds the CAC Leakage Table index, using maximum index from CAC table.\n"); pr_warn 581 drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c pr_warn("Index from SCLK/VDDC Dependency Table exceeds the CAC Leakage Table index in second look up, using maximum index from CAC table."); pr_warn 590 drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c pr_warn("Unable to get std_vddc from SCLK/VDDC Dependency Table, using vddc.\n"); pr_warn 2250 drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c pr_warn("can't get the offset of type %x member %x\n", type, member); pr_warn 2273 drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c pr_warn("can't get the mac of %x\n", value); pr_warn 2353 drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c pr_warn("can't get the offset of type %x member %x\n", type, member); pr_warn 2380 drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c pr_warn("can't get the mac of %x\n", value); pr_warn 2646 drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c pr_warn("can't get the offset of type %x member %x\n", type, member); pr_warn 2670 drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c pr_warn("can't get the mac value %x\n", value); pr_warn 327 drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c pr_warn("can't get the mac of %x\n", value); pr_warn 2201 drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c pr_warn("can't get the offset of type %x member %x\n", type, member); pr_warn 2632 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_warn("NULL user input for clock and voltage\n"); pr_warn 86 drivers/gpu/drm/bridge/parade-ps8622.c pr_warn("PS8622 I2C write (0x%02x,0x%02x,0x%02x) failed: %d\n", pr_warn 178 drivers/gpu/drm/i915/gvt/debugfs.c pr_warn("%s\n", buf); pr_warn 203 drivers/gpu/drm/mgag200/mgag200_mode.c pr_warn("PLL delta too large\n"); pr_warn 13 drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.h #define DEV_WARN(fmt, args...) pr_warn(fmt, ##args) pr_warn 2171 drivers/gpu/drm/msm/dsi/dsi_host.c pr_warn("%s:Invalid response cmd\n", __func__); pr_warn 107 drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c pr_warn("PLL turned on before configuring PHY\n"); pr_warn 384 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_warn("%s: hw_ddc_clean failed\n", __func__); pr_warn 56 drivers/gpu/drm/omapdrm/dss/dss.h pr_warn("omapdss " DSS_SUBSYS_NAME ": " format, ##__VA_ARGS__) pr_warn 59 drivers/gpu/drm/omapdrm/dss/dss.h pr_warn("omapdss: " format, ##__VA_ARGS__) pr_warn 2387 drivers/gpu/drm/radeon/evergreen.c pr_warn("[drm] r600 flush TLB failed\n"); pr_warn 1094 drivers/gpu/drm/radeon/r100.c pr_warn("Failed to wait GUI idle while programming pipes. Bad things might happen.\n"); pr_warn 1252 drivers/gpu/drm/radeon/r100.c pr_warn("Failed to wait GUI idle while programming pipes. Bad things might happen.\n"); pr_warn 2490 drivers/gpu/drm/radeon/r100.c pr_warn("radeon: wait for empty RBBM fifo failed! Bad things might happen.\n"); pr_warn 396 drivers/gpu/drm/radeon/r300.c pr_warn("Failed to wait GUI idle while programming pipes. Bad things might happen.\n"); pr_warn 407 drivers/gpu/drm/radeon/r300.c pr_warn("Failed to wait GUI idle while programming pipes. Bad things might happen.\n"); pr_warn 410 drivers/gpu/drm/radeon/r300.c pr_warn("Failed to wait MC idle while programming pipes. Bad things might happen.\n"); pr_warn 101 drivers/gpu/drm/radeon/r420.c pr_warn("Failed to wait GUI idle while programming pipes. Bad things might happen.\n"); pr_warn 137 drivers/gpu/drm/radeon/r420.c pr_warn("Failed to wait GUI idle while programming pipes. Bad things might happen.\n"); pr_warn 149 drivers/gpu/drm/radeon/r420.c pr_warn("Failed to wait GUI idle while programming pipes. Bad things might happen.\n"); pr_warn 89 drivers/gpu/drm/radeon/r520.c pr_warn("Failed to wait MC idle while programming pipes. Bad things might happen.\n"); pr_warn 1103 drivers/gpu/drm/radeon/r600.c pr_warn("[drm] r600 flush TLB failed\n"); pr_warn 575 drivers/gpu/drm/radeon/radeon_audio.c pr_warn("Calculated ACR N value is too small. You may experience audio problems.\n"); pr_warn 577 drivers/gpu/drm/radeon/radeon_audio.c pr_warn("Calculated ACR N value is too large. You may experience audio problems.\n"); pr_warn 117 drivers/gpu/drm/radeon/radeon_clocks.c pr_warn("radeonfb: No ATY,RefCLK property !\n"); pr_warn 1385 drivers/gpu/drm/radeon/radeon_device.c pr_warn("radeon: No suitable DMA available\n"); pr_warn 112 drivers/gpu/drm/radeon/radeon_gem.c pr_warn("Set domain without domain !\n"); pr_warn 250 drivers/gpu/drm/radeon/radeon_test.c pr_warn("Error while testing BO move\n"); pr_warn 403 drivers/gpu/drm/radeon/radeon_test.c pr_warn("Error while testing ring sync (%d)\n", r); pr_warn 513 drivers/gpu/drm/radeon/radeon_test.c pr_warn("Error while testing ring sync (%d)\n", r); pr_warn 263 drivers/gpu/drm/radeon/rs400.c pr_warn("rs400: Failed to wait MC idle while programming pipes. Bad things might happen. %08x\n", pr_warn 57 drivers/gpu/drm/radeon/rs690.c pr_warn("Failed to wait MC idle while programming pipes. Bad things might happen.\n"); pr_warn 162 drivers/gpu/drm/radeon/rv515.c pr_warn("Failed to wait GUI idle while resetting GPU. Bad things might happen.\n"); pr_warn 173 drivers/gpu/drm/radeon/rv515.c pr_warn("Failed to wait GUI idle while resetting GPU. Bad things might happen.\n"); pr_warn 176 drivers/gpu/drm/radeon/rv515.c pr_warn("Failed to wait MC idle while programming pipes. Bad things might happen.\n"); pr_warn 178 drivers/gpu/drm/ttm/ttm_page_alloc.c pr_warn("Setting allocation size to larger than %lu is not recommended\n", pr_warn 227 drivers/gpu/drm/ttm/ttm_page_alloc_dma.c pr_warn("Setting allocation size to larger than %lu is not recommended\n", pr_warn 478 drivers/gpu/host1x/cdma.c pr_warn("%s: CDMA still running\n", __func__); pr_warn 211 drivers/gpu/host1x/intr.c pr_warn("%s: NULL waiter\n", __func__); pr_warn 330 drivers/gpu/host1x/intr.c pr_warn("%s cannot stop syncpt intr id=%u\n", pr_warn 2578 drivers/hid/hid-core.c pr_warn("hid_debug is now used solely for parser and driver debugging.\n" pr_warn 100 drivers/hid/hid-cougar.c pr_warn("cougar: no mappings defined for G6/spacebar"); pr_warn 769 drivers/hid/hid-logitech-dj.c pr_warn("%s: delayedwork queued before hidpp interface was enumerated\n", pr_warn 1163 drivers/hid/hid-quirks.c pr_warn("Could not parse HID quirk module param %s\n", pr_warn 422 drivers/hid/hid-roccat.c pr_warn("can't get major number\n"); pr_warn 432 drivers/hid/hid-roccat.c pr_warn("cannot add cdev\n"); pr_warn 584 drivers/hid/hidraw.c pr_warn("can't get major number\n"); pr_warn 1084 drivers/hv/hv_balloon.c pr_warn("Received Unknown type: %d\n", info_hdr->type); pr_warn 1280 drivers/hv/hv_balloon.c pr_warn("Balloon request will be partially fulfilled. %s\n", pr_warn 1506 drivers/hv/hv_balloon.c pr_warn("Currently ballooning\n"); pr_warn 1521 drivers/hv/hv_balloon.c pr_warn("Currently hot-adding\n"); pr_warn 1553 drivers/hv/hv_balloon.c pr_warn("Unhandled message: type: %d\n", dm_hdr->type); pr_warn 1723 drivers/hv/hv_balloon.c pr_warn("Ballooned pages: %d\n", dm->num_pages_ballooned); pr_warn 94 drivers/hv/hv_snapshot.c pr_warn("VSS: timeout waiting for daemon to reply\n"); pr_warn 196 drivers/hv/hv_snapshot.c pr_warn("VSS: failed to communicate to the daemon: %d\n", rc); pr_warn 356 drivers/hv/hv_snapshot.c pr_warn("Integration service 'Backup (volume snapshot)'" pr_warn 374 drivers/hv/hv_snapshot.c pr_warn("VSS: Failed to initialize transport\n"); pr_warn 198 drivers/hv/hv_utils_transport.c pr_warn("hvt_cn_callback: spurious message received!\n"); pr_warn 213 drivers/hv/hv_utils_transport.c pr_warn("hvt_cn_callback: unexpected netlink message!\n"); pr_warn 494 drivers/hwmon/abituguru.c pr_warn("bank1-sensor: %d reading (%d) too close to limits, " pr_warn 1255 drivers/hwmon/abituguru3.c pr_warn("this motherboard was not detected using DMI. " pr_warn 169 drivers/hwmon/applesmc.c pr_warn("wait_read() fail: 0x%02x\n", status); pr_warn 200 drivers/hwmon/applesmc.c pr_warn("send_byte(0x%02x, 0x%04x) fail: 0x%02x\n", cmd, port, status); pr_warn 225 drivers/hwmon/applesmc.c pr_warn("%.4s: read arg fail\n", key); pr_warn 231 drivers/hwmon/applesmc.c pr_warn("%.4s: read len fail\n", key); pr_warn 237 drivers/hwmon/applesmc.c pr_warn("%.4s: read data[%d] fail\n", key, i); pr_warn 252 drivers/hwmon/applesmc.c pr_warn("flushed %d bytes, last value is: %d\n", i, data); pr_warn 262 drivers/hwmon/applesmc.c pr_warn("%s: write arg fail\n", key); pr_warn 267 drivers/hwmon/applesmc.c pr_warn("%.4s: write len fail\n", key); pr_warn 273 drivers/hwmon/applesmc.c pr_warn("%s: write data fail\n", key); pr_warn 495 drivers/hwmon/applesmc.c pr_warn("failed to init the device\n"); pr_warn 541 drivers/hwmon/applesmc.c pr_warn("key count changed from %d to %d\n", pr_warn 1183 drivers/hwmon/applesmc.c pr_warn("driver init failed (ret=%d)!\n", ret); pr_warn 1271 drivers/hwmon/applesmc.c pr_warn("supported laptop not found!\n"); pr_warn 1351 drivers/hwmon/applesmc.c pr_warn("driver init failed (ret=%d)!\n", ret); pr_warn 1161 drivers/hwmon/dell-smm-hwmon.c pr_warn("broken Dell BIOS detected, disallow fan support\n"); pr_warn 1167 drivers/hwmon/dell-smm-hwmon.c pr_warn("broken Dell BIOS detected, disallow fan type call\n"); pr_warn 1590 drivers/hwmon/f71805f.c pr_warn("Device not activated, skipping\n"); pr_warn 1596 drivers/hwmon/f71805f.c pr_warn("Base address not set, skipping\n"); pr_warn 2690 drivers/hwmon/f71882fg.c pr_warn("Device not activated\n"); pr_warn 2697 drivers/hwmon/f71882fg.c pr_warn("Base address not set\n"); pr_warn 148 drivers/hwmon/hwmon-vid.c pr_warn("Requested unsupported VRM version (%u)\n", pr_warn 1374 drivers/hwmon/nct6683.c pr_warn("Forcibly enabling EC access. Data may be unusable.\n"); pr_warn 4798 drivers/hwmon/nct6775.c pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n"); pr_warn 1740 drivers/hwmon/pc87360.c pr_warn("PC8736x not detected, module not inserted\n"); pr_warn 1753 drivers/hwmon/pc87360.c pr_warn("No active logical device, module not inserted\n"); pr_warn 1225 drivers/hwmon/pc87427.c pr_warn("Logical device 0x%02x is memory-mapped, can't use\n", pr_warn 306 drivers/hwmon/pcf8591.c pr_warn("invalid input_mode (%d)\n", input_mode); pr_warn 165 drivers/hwmon/sch56xx-common.c pr_warn("EC reports: 0x%02x reading virtual register 0x%04hx\n", pr_warn 400 drivers/hwmon/sch56xx-common.c pr_warn("Watchdog not enabled by BIOS, not registering\n"); pr_warn 491 drivers/hwmon/sch56xx-common.c pr_warn("Device not activated\n"); pr_warn 503 drivers/hwmon/sch56xx-common.c pr_warn("Base address not set\n"); pr_warn 619 drivers/hwmon/smsc47m1.c pr_warn("Failed to disable device\n"); pr_warn 1293 drivers/hwmon/vt1211.c pr_warn("HW monitor is disabled, skipping\n"); pr_warn 1300 drivers/hwmon/vt1211.c pr_warn("Base address is not set, skipping\n"); pr_warn 1327 drivers/hwmon/vt1211.c pr_warn("Invalid UCH configuration %d. Choose a value between 0 and 31.\n", pr_warn 1334 drivers/hwmon/vt1211.c pr_warn("Invalid interrupt mode %d. Only mode 0 is supported.\n", pr_warn 2781 drivers/hwmon/w83627ehf.c pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n"); pr_warn 1296 drivers/hwmon/w83627hf.c pr_warn("Base address not set, skipping\n"); pr_warn 1302 drivers/hwmon/w83627hf.c pr_warn("Enabling HWM logical device\n"); pr_warn 718 drivers/hwspinlock/hwspinlock_core.c pr_warn("a free hwspinlock is not available\n"); pr_warn 760 drivers/hwspinlock/hwspinlock_core.c pr_warn("hwspinlock %u does not exist\n", id); pr_warn 770 drivers/hwspinlock/hwspinlock_core.c pr_warn("hwspinlock %u is already in use\n", id); pr_warn 794 drivers/hwtracing/intel_th/gth.c pr_warn("Can't initialize sysfs attributes\n"); pr_warn 293 drivers/i2c/busses/i2c-parport.c pr_warn("adapter type unspecified\n"); pr_warn 298 drivers/i2c/busses/i2c-parport.c pr_warn("invalid type (%d)\n", type); pr_warn 1286 drivers/i2c/busses/i2c-pxa.c pr_warn("i2c: <%s> clock rate not set\n", pr_warn 451 drivers/i2c/busses/i2c-viperboard.c pr_warn("invalid i2c_bus_freq (%d)\n", i2c_bus_freq); pr_warn 447 drivers/i2c/busses/scx200_acb.c pr_warn("probe failed\n"); pr_warn 1441 drivers/ide/ide-probe.c pr_warn("legacy IDE will be removed in 2021, please switch to libata\n" pr_warn 581 drivers/infiniband/core/cache.c pr_warn("%s: unable to add gid %pI6 error=%d\n", pr_warn 2720 drivers/infiniband/core/device.c pr_warn("Couldn't create InfiniBand device class\n"); pr_warn 2728 drivers/infiniband/core/device.c pr_warn("Could't init IB address resolution\n"); pr_warn 2734 drivers/infiniband/core/device.c pr_warn("Couldn't init IB MAD\n"); pr_warn 2740 drivers/infiniband/core/device.c pr_warn("Couldn't init SA\n"); pr_warn 2746 drivers/infiniband/core/device.c pr_warn("Couldn't register LSM notifier. ret %d\n", ret); pr_warn 2752 drivers/infiniband/core/device.c pr_warn("Couldn't init compat dev. ret %d\n", ret); pr_warn 164 drivers/infiniband/core/fmr_pool.c pr_warn(PFX "ib_unmap_fmr returned %d\n", ret); pr_warn 256 drivers/infiniband/core/fmr_pool.c pr_warn(PFX "couldn't start cleanup kthread worker\n"); pr_warn 286 drivers/infiniband/core/fmr_pool.c pr_warn(PFX "fmr_create failed for FMR %d\n", pr_warn 342 drivers/infiniband/core/fmr_pool.c pr_warn(PFX "pool still has %d regions registered\n", pr_warn 440 drivers/infiniband/core/fmr_pool.c pr_warn(PFX "fmr_map returns %d\n", result); pr_warn 493 drivers/infiniband/core/iwpm_util.c pr_warn("%s: Unable to put the nlmsg header\n", __func__); pr_warn 528 drivers/infiniband/core/iwpm_util.c pr_warn("%s: %s (msg type %s ret = %d)\n", pr_warn 671 drivers/infiniband/core/iwpm_util.c pr_warn("%s Unable to put NLMSG_DONE\n", __func__); pr_warn 678 drivers/infiniband/core/iwpm_util.c pr_warn("%s Unable to send a nlmsg\n", __func__); pr_warn 779 drivers/infiniband/core/iwpm_util.c pr_warn("%s: %s (ret = %d)\n", __func__, err_str, ret); pr_warn 47 drivers/infiniband/core/packer.c pr_warn("Field size %d bits not handled\n", size * 8); pr_warn 107 drivers/infiniband/core/packer.c pr_warn("Structure field %s of size %d bits is not byte-aligned\n", pr_warn 134 drivers/infiniband/core/packer.c pr_warn("Field size %d bits not handled\n", size * 8); pr_warn 190 drivers/infiniband/core/packer.c pr_warn("Structure field %s of size %d bits is not byte-aligned\n", pr_warn 2226 drivers/infiniband/core/sa_query.c pr_warn("Couldn't query port\n"); pr_warn 2274 drivers/infiniband/core/sa_query.c pr_warn("Couldn't create new SM AH\n"); pr_warn 482 drivers/infiniband/core/ud_header.c pr_warn("Invalid LRH.link_version %d\n", pr_warn 499 drivers/infiniband/core/ud_header.c pr_warn("Invalid GRH.ip_version %d\n", pr_warn 504 drivers/infiniband/core/ud_header.c pr_warn("Invalid GRH.next_header 0x%02x\n", pr_warn 511 drivers/infiniband/core/ud_header.c pr_warn("Invalid LRH.link_next_header %d\n", pr_warn 528 drivers/infiniband/core/ud_header.c pr_warn("Invalid BTH.opcode 0x%02x\n", header->bth.opcode); pr_warn 533 drivers/infiniband/core/ud_header.c pr_warn("Invalid BTH.transport_header_version %d\n", pr_warn 653 drivers/infiniband/core/umem_odp.c pr_warn("fail to get %zu user pages with error %d\n", gup_num_pages, npages); pr_warn 677 drivers/infiniband/core/umem_odp.c pr_warn("ib_umem_odp_map_dma_single_page failed with error %d\n", ret); pr_warn 3292 drivers/infiniband/core/uverbs_cmd.c pr_warn("create flow failed, flow %d: %d bytes left from uverb cmd\n", pr_warn 287 drivers/infiniband/core/verbs.c pr_warn("%s: enabling unsafe global rkey\n", caller); pr_warn 1756 drivers/infiniband/core/verbs.c pr_warn("%s speed is unknown, defaulting to %d\n", netdev->name, pr_warn 288 drivers/infiniband/hw/cxgb3/cxio_resource.c pr_warn("%s: Failed to add all PBL chunks (%x/%x)\n", pr_warn 181 drivers/infiniband/hw/cxgb3/iwch_provider.c pr_warn("Warning - downlevel libcxgb3 (non-fatal)\n"); pr_warn 1927 drivers/infiniband/hw/cxgb4/cm.c pr_warn("Abort rpl to freed endpoint\n"); pr_warn 2384 drivers/infiniband/hw/cxgb4/cm.c pr_warn("%s stid %d lookup failure!\n", __func__, stid); pr_warn 2402 drivers/infiniband/hw/cxgb4/cm.c pr_warn("%s stid %d lookup failure!\n", __func__, stid); pr_warn 2919 drivers/infiniband/hw/cxgb4/cm.c pr_warn("%s PEER_ABORT IN DEAD STATE!!!!\n", __func__); pr_warn 3031 drivers/infiniband/hw/cxgb4/cm.c pr_warn("TERM received tid %u qpid %u\n", tid, pr_warn 3044 drivers/infiniband/hw/cxgb4/cm.c pr_warn("TERM received tid %u no ep/qp\n", tid); pr_warn 3344 drivers/infiniband/hw/cxgb4/cm.c pr_warn("%s qpn 0x%x not found!\n", __func__, conn_param->qpn); pr_warn 4094 drivers/infiniband/hw/cxgb4/cm.c pr_warn("%s connect request on invalid stid %d\n", pr_warn 4409 drivers/infiniband/hw/cxgb4/cm.c pr_warn("Abort on non-existent endpoint, tid %d\n", tid); pr_warn 167 drivers/infiniband/hw/cxgb4/cq.c pr_warn("%s: cqid %u not in BAR2 range\n", pr_warn 1491 drivers/infiniband/hw/cxgb4/device.c pr_warn("%s: unknown control cmd %u\n", pr_warn 296 drivers/infiniband/hw/cxgb4/qp.c pr_warn("%s: sqid %u or rqid %u not in BAR2 range\n", pr_warn 1220 drivers/infiniband/hw/cxgb4/qp.c pr_warn("%s post of type=%d TBD!\n", __func__, pr_warn 2569 drivers/infiniband/hw/cxgb4/qp.c pr_warn(MOD "%s: srqid %u not in BAR2 range.\n", pr_warn 318 drivers/infiniband/hw/cxgb4/resource.c pr_warn("Failed to add all PBL chunks (%x/%x)\n", pr_warn 408 drivers/infiniband/hw/cxgb4/resource.c pr_warn("Failed to add all RQT chunks (%x/%x)\n", pr_warn 499 drivers/infiniband/hw/cxgb4/resource.c pr_warn("Failed to add all OCQP chunks (%x/%x)\n", pr_warn 752 drivers/infiniband/hw/cxgb4/t4.h pr_warn("%s cxgb4 sw cq overflow cqid %u\n", pr_warn 823 drivers/infiniband/hw/cxgb4/t4.h pr_warn("%s cxgb4 sw cq overflow cqid %u\n", pr_warn 8595 drivers/infiniband/hw/hfi1/chip.c pr_warn("%s bad offset 0x%x\n", __func__, off); pr_warn 122 drivers/infiniband/hw/hfi1/driver.c pr_warn("Invalid module parameter value for 'cap_mask'\n"); pr_warn 130 drivers/infiniband/hw/hfi1/driver.c pr_warn("Ignoring non-writable capability bits %#lx\n", pr_warn 341 drivers/infiniband/hw/hfi1/mad.c pr_warn("%s: failed to find limited mgmt pkey, defaulting 0x%x\n", pr_warn 767 drivers/infiniband/hw/hfi1/mad.c pr_warn("%s bad offset 0x%x\n", __func__, off); pr_warn 782 drivers/infiniband/hw/hfi1/mad.c pr_warn("%s bad offset 0x%x\n", __func__, off); pr_warn 1036 drivers/infiniband/hw/hfi1/mad.c pr_warn("OPA Get PKey AM Invalid : P = %d; B = 0x%x; N = 0x%x\n", pr_warn 1053 drivers/infiniband/hw/hfi1/mad.c pr_warn("OPA Get PKey AM Invalid : s 0x%x; req 0x%x; " pr_warn 1154 drivers/infiniband/hw/hfi1/mad.c pr_warn("invalid logical state(s) (old %d new %d)\n", pr_warn 1175 drivers/infiniband/hw/hfi1/mad.c pr_warn("invalid physical state(s) (old %d new %d)\n", pr_warn 1204 drivers/infiniband/hw/hfi1/mad.c pr_warn("invalid logical state transition %s -> %s\n", pr_warn 1215 drivers/infiniband/hw/hfi1/mad.c pr_warn("invalid physical state transition %s -> %s\n", pr_warn 1261 drivers/infiniband/hw/hfi1/mad.c pr_warn("SubnSet(OPA_PortInfo) port state invalid: logical_state 0x%x physical_state 0x%x\n", pr_warn 1286 drivers/infiniband/hw/hfi1/mad.c pr_warn("SubnSet(OPA_PortInfo) invalid physical state 0x%x\n", pr_warn 1331 drivers/infiniband/hw/hfi1/mad.c pr_warn("SubnSet(OPA_PortInfo) Cannot move to Active with NeighborNormal 0\n"); pr_warn 1336 drivers/infiniband/hw/hfi1/mad.c pr_warn("SubnSet(OPA_PortInfo) invalid logical state 0x%x\n", pr_warn 1382 drivers/infiniband/hw/hfi1/mad.c pr_warn("OPA_PortInfo lid out of range: %X\n", lid); pr_warn 1390 drivers/infiniband/hw/hfi1/mad.c pr_warn("OPA_PortInfo SM lid out of range: %X\n", smlid); pr_warn 1419 drivers/infiniband/hw/hfi1/mad.c pr_warn("SubnSet(OPA_PortInfo) lid invalid 0x%x\n", pr_warn 1452 drivers/infiniband/hw/hfi1/mad.c pr_warn("SubnSet(OPA_PortInfo) smlid invalid 0x%x\n", smlid); pr_warn 1454 drivers/infiniband/hw/hfi1/mad.c pr_warn("SubnSet(OPA_PortInfo) smlid 0x%x\n", smlid); pr_warn 1539 drivers/infiniband/hw/hfi1/mad.c pr_warn("SubnSet(OPA_PortInfo) mtu invalid %d (0x%x)\n", pr_warn 1573 drivers/infiniband/hw/hfi1/mad.c pr_warn("SubnSet(OPA_PortInfo) VL's supported invalid %d\n", pr_warn 1735 drivers/infiniband/hw/hfi1/mad.c pr_warn("OPA Get PKey AM Invalid : P = %d; B = 0x%x; N = 0x%x\n", pr_warn 1752 drivers/infiniband/hw/hfi1/mad.c pr_warn("OPA Set PKey AM Invalid : s 0x%x; req 0x%x; avail 0x%x; blk/smp 0x%lx\n", pr_warn 2263 drivers/infiniband/hw/hfi1/mad.c pr_warn("OPA SubnGet(VL Arb) AM Invalid : 0x%x\n", pr_warn 2308 drivers/infiniband/hw/hfi1/mad.c pr_warn("OPA SubnSet(VL Arb) AM Invalid : 0x%x\n", pr_warn 4834 drivers/infiniband/hw/hfi1/mad.c pr_warn("failed to find limited mgmt pkey, defaulting 0x%x\n", pr_warn 134 drivers/infiniband/hw/i40iw/i40iw.h #define i40iw_pr_warn(fmt, args ...) pr_warn("%s: " fmt, __func__, ## args) pr_warn 55 drivers/infiniband/hw/mlx4/cq.c pr_warn("Unexpected event type %d " pr_warn 1223 drivers/infiniband/hw/mlx4/mad.c pr_warn("Could not change QP1 subnet prefix for port %d: query_gid error (%d)\n", pr_warn 1280 drivers/infiniband/hw/mlx4/mad.c pr_warn("Unsupported subtype 0x%x for " pr_warn 114 drivers/infiniband/hw/mlx4/main.c pr_warn("Device managed flow steering is unavailable for IB port in multifunction env.\n"); pr_warn 1990 drivers/infiniband/hw/mlx4/main.c pr_warn("could not find mgid entry\n"); pr_warn 2905 drivers/infiniband/hw/mlx4/main.c pr_warn("failure unregistering notifier\n"); pr_warn 3026 drivers/infiniband/hw/mlx4/main.c pr_warn("failure unregistering notifier\n"); pr_warn 3113 drivers/infiniband/hw/mlx4/main.c pr_warn("mlx4_ib_handle_catas_error was started\n"); pr_warn 3161 drivers/infiniband/hw/mlx4/main.c pr_warn("mlx4_ib_handle_catas_error ended\n"); pr_warn 48 drivers/infiniband/hw/mlx4/mcg.c #define mcg_warn(fmt, arg...) pr_warn("MCG WARNING: " fmt, ##arg) pr_warn 51 drivers/infiniband/hw/mlx4/mcg.c pr_warn("%s-%d: %16s (port %d): WARNING: " format, __func__, __LINE__,\ pr_warn 110 drivers/infiniband/hw/mlx4/mr.c pr_warn("write_block: len %llx is not aligned to mtt_size %llx\n", pr_warn 353 drivers/infiniband/hw/mlx4/mr.c pr_warn("misaligned total length detected (%llu, %llu)!", pr_warn 363 drivers/infiniband/hw/mlx4/mr.c pr_warn("umem_calc_optimal_mtt_size - unexpected shift %lld\n", block_shift); pr_warn 774 drivers/infiniband/hw/mlx4/mr.c pr_warn("SYNC_TPT error %d when " pr_warn 266 drivers/infiniband/hw/mlx4/qp.c pr_warn("Unexpected event type %d " pr_warn 1405 drivers/infiniband/hw/mlx4/qp.c pr_warn("modify QP %06x to RESET failed.\n", pr_warn 1426 drivers/infiniband/hw/mlx4/qp.c pr_warn("modify QP %06x to RESET failed.\n", pr_warn 2078 drivers/infiniband/hw/mlx4/qp.c pr_warn("failed to reverse WQN=0x%06x\n", pr_warn 2102 drivers/infiniband/hw/mlx4/qp.c pr_warn("failed to reverse WQN=%x\n", pr_warn 2587 drivers/infiniband/hw/mlx4/qp.c pr_warn("INIT_PORT failed for port %d\n", pr_warn 4258 drivers/infiniband/hw/mlx4/qp.c pr_warn("WQN=0x%06x failed with reverting HW's resources failure\n", pr_warn 63 drivers/infiniband/hw/mlx4/srq.c pr_warn("Unexpected event type %d " pr_warn 111 drivers/infiniband/hw/mlx5/cq.c pr_warn("unknown completion status\n"); pr_warn 1220 drivers/infiniband/hw/mlx5/cq.c pr_warn("resize CQ failed to get resize CQE, CQN 0x%x\n", pr_warn 1243 drivers/infiniband/hw/mlx5/main.c pr_warn("invalid mtu\n"); pr_warn 322 drivers/infiniband/hw/mlx5/qp.c pr_warn("mlx5_ib: Unexpected event type %d on QP %06x\n", type, qp->qpn); pr_warn 2656 drivers/infiniband/hw/mlx5/qp.c pr_warn("%s: no PD for transport %s\n", __func__, pr_warn 3218 drivers/infiniband/hw/mlx5/qp.c pr_warn("%s: Rate limit can only be changed when SQ is moving to RDY\n", pr_warn 35 drivers/infiniband/hw/mlx5/srq.c pr_warn("mlx5_ib: Unexpected event type %d on SRQ %06x\n", pr_warn 54 drivers/infiniband/sw/rxe/rxe_av.c pr_warn("invalid sgid index = %d\n", sgid_index); pr_warn 350 drivers/infiniband/sw/rxe/rxe_comp.c pr_warn("unexpected nak %x\n", syn); pr_warn 361 drivers/infiniband/sw/rxe/rxe_comp.c pr_warn("unexpected opcode\n"); pr_warn 44 drivers/infiniband/sw/rxe/rxe_cq.c pr_warn("cqe(%d) <= 0\n", cqe); pr_warn 49 drivers/infiniband/sw/rxe/rxe_cq.c pr_warn("cqe(%d) > max_cqe(%d)\n", pr_warn 57 drivers/infiniband/sw/rxe/rxe_cq.c pr_warn("cqe(%d) < current # elements in queue (%d)", pr_warn 93 drivers/infiniband/sw/rxe/rxe_cq.c pr_warn("unable to create cq\n"); pr_warn 119 drivers/infiniband/sw/rxe/rxe_mmap.c pr_warn("unable to find pending mmap info\n"); pr_warn 174 drivers/infiniband/sw/rxe/rxe_mr.c pr_warn("err %d from rxe_umem_get\n", pr_warn 187 drivers/infiniband/sw/rxe/rxe_mr.c pr_warn("err %d from rxe_mem_alloc\n", err); pr_warn 209 drivers/infiniband/sw/rxe/rxe_mr.c pr_warn("null vaddr\n"); pr_warn 310 drivers/infiniband/sw/rxe/rxe_mr.c pr_warn("mem not in valid state\n"); pr_warn 321 drivers/infiniband/sw/rxe/rxe_mr.c pr_warn("range violation\n"); pr_warn 329 drivers/infiniband/sw/rxe/rxe_mr.c pr_warn("crosses page boundary\n"); pr_warn 175 drivers/infiniband/sw/rxe/rxe_pool.c pr_warn("not enough indices for max_elem\n"); pr_warn 261 drivers/infiniband/sw/rxe/rxe_pool.c pr_warn("%s pool destroyed with unfree'd elem\n", pr_warn 294 drivers/infiniband/sw/rxe/rxe_pool.c pr_warn("element already exists!\n"); pr_warn 325 drivers/infiniband/sw/rxe/rxe_pool.c pr_warn("key already exists!\n"); pr_warn 49 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("invalid send wr = %d > %d\n", pr_warn 55 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("invalid send sge = %d > %d\n", pr_warn 62 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("invalid recv wr = %d > %d\n", pr_warn 68 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("invalid recv sge = %d > %d\n", pr_warn 75 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("invalid max inline data = %d > %d\n", pr_warn 93 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("missing cq\n"); pr_warn 102 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("invalid port = %d\n", port_num); pr_warn 109 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("SMI QP exists for port %d\n", port_num); pr_warn 114 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("GSI QP exists for port %d\n", port_num); pr_warn 423 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("invalid mask or state for qp\n"); pr_warn 437 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("invalid port %d\n", attr->port_num); pr_warn 452 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("invalid alt port %d\n", attr->alt_port_num); pr_warn 456 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("invalid QP alt timeout %d > 31\n", pr_warn 478 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("invalid max_rd_atomic %d > %d\n", pr_warn 487 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("invalid QP timeout %d > 31\n", pr_warn 731 drivers/infiniband/sw/rxe/rxe_qp.c pr_warn("qp#%d state -> SQE !!?\n", qp_num(qp)); pr_warn 1396 drivers/infiniband/sw/rxe/rxe_resp.c pr_warn("qp#%d moved to error state\n", qp_num(qp)); pr_warn 43 drivers/infiniband/sw/rxe/rxe_srq.c pr_warn("srq in error state\n"); pr_warn 49 drivers/infiniband/sw/rxe/rxe_srq.c pr_warn("max_wr(%d) > max_srq_wr(%d)\n", pr_warn 55 drivers/infiniband/sw/rxe/rxe_srq.c pr_warn("max_wr(%d) <= 0\n", attr->max_wr); pr_warn 60 drivers/infiniband/sw/rxe/rxe_srq.c pr_warn("max_wr (%d) < srq->limit (%d)\n", pr_warn 71 drivers/infiniband/sw/rxe/rxe_srq.c pr_warn("srq_limit(%d) > max_srq_wr(%d)\n", pr_warn 77 drivers/infiniband/sw/rxe/rxe_srq.c pr_warn("srq_limit (%d) > cur limit(%d)\n", pr_warn 86 drivers/infiniband/sw/rxe/rxe_srq.c pr_warn("max_sge(%d) > max_srq_sge(%d)\n", pr_warn 124 drivers/infiniband/sw/rxe/rxe_srq.c pr_warn("unable to allocate queue for srq\n"); pr_warn 81 drivers/infiniband/sw/rxe/rxe_task.c pr_warn("%s failed with bad state %d\n", __func__, task->state); pr_warn 108 drivers/infiniband/sw/rxe/rxe_task.c pr_warn("%s failed with bad state %d\n", __func__, pr_warn 1226 drivers/infiniband/sw/rxe/rxe_verbs.c pr_warn("%s failed with error %d\n", __func__, err); pr_warn 98 drivers/infiniband/sw/siw/siw_cm.c pr_warn("siw: cannot restore sk callbacks: no ep\n"); pr_warn 102 drivers/infiniband/sw/siw/siw_cm.c pr_warn("siw: cannot restore sk callbacks: no sk\n"); pr_warn 1464 drivers/infiniband/sw/siw/siw_cm.c pr_warn("Setting MPA version to %u\n", MPA_REVISION_2); pr_warn 71 drivers/infiniband/sw/siw/siw_main.c pr_warn("siw: device registration error %d\n", rv); pr_warn 227 drivers/infiniband/sw/siw/siw_main.c pr_warn("siw: no tx cpu found\n"); pr_warn 318 drivers/infiniband/sw/siw/siw_main.c pr_warn("siw: device %s error: no parent device\n", pr_warn 41 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: %s: [QP %u]: bogus addr: %pK, %pK\n", pr_warn 65 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: %s, len %d, page %p, rv %d\n", pr_warn 112 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: %s, len %d, kva 0x%pK, rv %d\n", pr_warn 190 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: rresp stag: %08x != %08x\n", pr_warn 196 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: rresp off: %016llx != %016llx\n", pr_warn 204 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: rresp len: %d != %d\n", pr_warn 243 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: write stag: %08x != %08x\n", pr_warn 250 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: write off: %016llx != %016llx\n", pr_warn 288 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: invalid ddp qn %d for send\n", pr_warn 294 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: send msn: %u != %u\n", pr_warn 301 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u], send mo: %u != %u\n", pr_warn 637 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: rreq with mpa len %d\n", qp_id(qp), pr_warn 714 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: irq %d exceeded %d\n", qp_id(qp), pr_warn 788 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: proc RRESP: status %d, op %d\n", pr_warn 798 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: ORQ empty at idx %d\n", pr_warn 809 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: resume RRESP: status %d\n", pr_warn 885 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: got TERMINATE. layer %d, type %d, code %d\n", pr_warn 893 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: rx bogus TERM [QN x%08x, MSN x%08x, MO x%08x]\n", pr_warn 984 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: crc error. in: %08x, own %08x, op %u\n", pr_warn 1029 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: received ddp version unsupported %d\n", pr_warn 1044 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: received rdmap version unsupported %d\n", pr_warn 1055 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: received unknown packet type %u\n", pr_warn 1115 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: packet intersection: %u : %u\n", pr_warn 1154 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: fence resume: bad status %d\n", pr_warn 1164 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: no ORQE\n", qp_id(qp)); pr_warn 1178 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("siw: [QP %u]: fence resume: orq idx: %d:%d\n", pr_warn 1437 drivers/infiniband/sw/siw/siw_qp_rx.c pr_warn("QP[%u]: RX out of state\n", qp_id(qp)); pr_warn 929 drivers/infiniband/sw/siw/siw_qp_tx.c pr_warn("siw: fastreg: STag 0x%08x unknown\n", sqe->rkey); pr_warn 934 drivers/infiniband/sw/siw/siw_qp_tx.c pr_warn("siw: fastreg: STag 0x%08x: bad MR\n", sqe->rkey); pr_warn 940 drivers/infiniband/sw/siw/siw_qp_tx.c pr_warn("siw: fastreg: STag 0x%08x unknown\n", sqe->rkey); pr_warn 945 drivers/infiniband/sw/siw/siw_qp_tx.c pr_warn("siw: fastreg: PD mismatch\n"); pr_warn 950 drivers/infiniband/sw/siw/siw_qp_tx.c pr_warn("siw: fastreg: STag 0x%08x already valid\n", sqe->rkey); pr_warn 1257 drivers/infiniband/sw/siw/siw_qp_tx.c pr_warn("siw: no tx cpu available\n"); pr_warn 81 drivers/infiniband/sw/siw/siw_verbs.c pr_warn("siw: mmap not page aligned\n"); pr_warn 92 drivers/infiniband/sw/siw/siw_verbs.c pr_warn("remap_vmalloc_range failed: %lu, %u\n", off, size); pr_warn 148 drivers/infiniband/sw/siw/siw_verbs.c pr_warn("siw: dropping orphaned uobj at %lu\n", index); pr_warn 882 drivers/infiniband/ulp/ipoib/ipoib_cm.c pr_warn("%s: failed to create CM ID\n", priv->ca->name); pr_warn 890 drivers/infiniband/ulp/ipoib/ipoib_cm.c pr_warn("%s: failed to listen on ID 0x%llx\n", priv->ca->name, pr_warn 1570 drivers/infiniband/ulp/ipoib/ipoib_cm.c pr_warn("%s: failed to allocate SRQ, error %ld\n", pr_warn 370 drivers/infiniband/ulp/ipoib/ipoib_ib.c pr_warn("failed(%d) modify QP:0x%x SQE->RTS\n", pr_warn 377 drivers/infiniband/ulp/ipoib/ipoib_ib.c pr_warn("QP (%d) will stay in state: %d\n", pr_warn 478 drivers/infiniband/ulp/ipoib/ipoib_ib.c pr_warn("%s: Got unexpected wqe id\n", __func__); pr_warn 909 drivers/infiniband/ulp/ipoib/ipoib_ib.c pr_warn("%s: Failed to open dev\n", dev->name); pr_warn 1001 drivers/infiniband/ulp/ipoib/ipoib_ib.c pr_warn("%s: Got unexpected wqe id\n", __func__); pr_warn 1705 drivers/infiniband/ulp/ipoib/ipoib_main.c pr_warn("%s: failed to allocate TX ring (%d entries)\n", pr_warn 1713 drivers/infiniband/ulp/ipoib/ipoib_main.c pr_warn("%s: ipoib_transport_dev_init failed\n", pr_warn 1760 drivers/infiniband/ulp/ipoib/ipoib_main.c pr_warn("%s: failed to allocate device WQ\n", dev->name); pr_warn 1767 drivers/infiniband/ulp/ipoib/ipoib_main.c pr_warn("%s: failed to allocate PD\n", priv->ca->name); pr_warn 1773 drivers/infiniband/ulp/ipoib/ipoib_main.c pr_warn("%s failed to init HW resource\n", dev->name); pr_warn 1779 drivers/infiniband/ulp/ipoib/ipoib_main.c pr_warn("%s failed to init neigh hash\n", dev->name); pr_warn 1785 drivers/infiniband/ulp/ipoib/ipoib_main.c pr_warn("%s failed to open device\n", dev->name); pr_warn 1863 drivers/infiniband/ulp/ipoib/ipoib_main.c pr_warn("%s: ib_query_port %d failed\n", priv->ca->name, pr_warn 1871 drivers/infiniband/ulp/ipoib/ipoib_main.c pr_warn("%s: ib_query_pkey port %d failed (ret = %d)\n", pr_warn 1878 drivers/infiniband/ulp/ipoib/ipoib_main.c pr_warn("%s: rdma_query_gid port %d failed (ret = %d)\n", pr_warn 1938 drivers/infiniband/ulp/ipoib/ipoib_main.c pr_warn("%s: failed to initialize device: %s port %d (ret = %d)\n", pr_warn 2451 drivers/infiniband/ulp/ipoib/ipoib_main.c pr_warn("%s, %d: ipoib_intf_alloc failed %ld\n", hca->name, port, pr_warn 2466 drivers/infiniband/ulp/ipoib/ipoib_main.c pr_warn("%s: couldn't register ipoib port %d; error %d\n", pr_warn 181 drivers/infiniband/ulp/ipoib/ipoib_verbs.c pr_warn("%s: failed to create receive CQ\n", ca->name); pr_warn 190 drivers/infiniband/ulp/ipoib/ipoib_verbs.c pr_warn("%s: failed to create send CQ\n", ca->name); pr_warn 211 drivers/infiniband/ulp/ipoib/ipoib_verbs.c pr_warn("%s: failed to create QP\n", ca->name); pr_warn 85 drivers/infiniband/ulp/iser/iscsi_iser.h pr_warn(PFX "%s: " fmt, \ pr_warn 24 drivers/infiniband/ulp/isert/ib_isert.h pr_warn(PFX "%s: " fmt, \ pr_warn 830 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("%s: subnet timeout %d may cause SRP login to fail.\n", pr_warn 3525 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("invalid id_ext parameter '%s'\n", p); pr_warn 3541 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("invalid ioc_guid parameter '%s'\n", p); pr_warn 3556 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad dest GID parameter '%s'\n", p); pr_warn 3569 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad P_Key parameter '%s'\n", p); pr_warn 3583 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad service_id parameter '%s'\n", p); pr_warn 3600 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad source parameter '%s'\n", p); pr_warn 3619 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad dest parameter '%s'\n", p); pr_warn 3629 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad max sect parameter '%s'\n", p); pr_warn 3637 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad queue_size parameter '%s'\n", p); pr_warn 3649 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad max cmd_per_lun parameter '%s'\n", pr_warn 3658 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad max target_can_queue parameter '%s'\n", pr_warn 3667 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad IO class parameter '%s'\n", p); pr_warn 3672 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("unknown IO class parameter value %x specified (use %x or %x).\n", pr_warn 3688 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad initiator_ext value '%s'\n", p); pr_warn 3698 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad max cmd_sg_entries parameter '%s'\n", pr_warn 3707 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad allow_ext_sg parameter '%s'\n", p); pr_warn 3716 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad max sg_tablesize parameter '%s'\n", pr_warn 3725 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad comp_vector parameter '%s'\n", p); pr_warn 3733 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("bad tl_retry_count parameter '%s' (must be a number between 2 and 7)\n", pr_warn 3741 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("unknown parameter or missing value '%s' in target creation request\n", pr_warn 3754 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("target creation request is missing one or more parameters\n"); pr_warn 3758 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("cmd_per_lun = %d > queue_size = %d\n", pr_warn 3848 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("No MR pool and no external indirect descriptors, limiting sg_tablesize to cmd_sg_cnt\n"); pr_warn 4259 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("srp_sg_tablesize is deprecated, please use cmd_sg_entries\n"); pr_warn 4268 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("Clamping cmd_sg_entries to 255\n"); pr_warn 4275 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("Bumping up indirect_sg_entries to match cmd_sg_entries (%u)\n", pr_warn 4281 drivers/infiniband/ulp/srp/ib_srp.c pr_warn("Clamping indirect_sg_entries to %u\n", pr_warn 1419 drivers/infiniband/ulp/srpt/ib_srpt.c pr_warn("truncated sense data from %d to %d bytes\n", pr_warn 2744 drivers/infiniband/ulp/srpt/ib_srpt.c pr_warn("%s: IB send queue full (needed %d)\n", pr_warn 2849 drivers/infiniband/ulp/srpt/ib_srpt.c pr_warn("%s: IB send queue full (needed %d)\n", pr_warn 384 drivers/input/gameport/gameport.c pr_warn("Can't get module reference, dropping event %d\n", pr_warn 858 drivers/input/joystick/gamecon.c pr_warn("Failed to initiate rumble for N64 device %d\n", pr_warn 297 drivers/input/misc/apanel.c pr_warn(APANEL ": duplicate entry for devno %u\n", pr_warn 52 drivers/input/misc/atlas_btns.c pr_warn("shrugged on unexpected function: function=%x,address=%lx,value=%x\n", pr_warn 102 drivers/input/misc/xen-kbdfront.c pr_warn("unhandled keycode 0x%x\n", key->keycode); pr_warn 240 drivers/input/misc/xen-kbdfront.c pr_warn("xenkbd: can't request multi-touch"); pr_warn 289 drivers/input/misc/xen-kbdfront.c pr_warn("xenkbd: can't request abs-pointer\n"); pr_warn 1080 drivers/input/mousedev.c pr_warn("could not register psaux device, error: %d\n", pr_warn 1110 drivers/input/serio/i8042-x86ia64io.h pr_warn("PNP: PS/2 controller has invalid data port %#x; using default %#x\n", pr_warn 1119 drivers/input/serio/i8042-x86ia64io.h pr_warn("PNP: PS/2 controller has invalid command port %#x; using default %#x\n", pr_warn 1126 drivers/input/serio/i8042-x86ia64io.h pr_warn("PNP: PS/2 controller doesn't have KBD irq; using default %d\n", pr_warn 1134 drivers/input/serio/i8042-x86ia64io.h pr_warn("PNP: PS/2 appears to have AUX port disabled, " pr_warn 1138 drivers/input/serio/i8042-x86ia64io.h pr_warn("PNP: PS/2 controller doesn't have AUX irq; using default %d\n", pr_warn 410 drivers/input/serio/i8042.c pr_warn("Can't write CTR while closing %s port\n", port_name); pr_warn 844 drivers/input/serio/i8042.c pr_warn("Failed to disable AUX port, but continuing anyway... Is this a SiS?\n"); pr_warn 845 drivers/input/serio/i8042.c pr_warn("If AUX port is really absent please use the 'i8042.noaux' option\n"); pr_warn 857 drivers/input/serio/i8042.c pr_warn("Attempting to reset device connected to KBD port\n"); pr_warn 1025 drivers/input/serio/i8042.c pr_warn("Warning: Keylock active\n"); pr_warn 1082 drivers/input/serio/i8042.c pr_warn("Can't write CTR while resetting\n"); pr_warn 1105 drivers/input/serio/i8042.c pr_warn("Can't restore CTR\n"); pr_warn 1152 drivers/input/serio/i8042.c pr_warn("Failed to enable DRITEK extension: %d\n", error); pr_warn 1188 drivers/input/serio/i8042.c pr_warn("Can't write CTR to resume, retrying...\n"); pr_warn 1204 drivers/input/serio/i8042.c pr_warn("failed to resume active multiplexor, mouse won't work\n"); pr_warn 272 drivers/input/serio/serio.c pr_warn("Can't get module reference, dropping event %d\n", pr_warn 810 drivers/input/serio/serio.c pr_warn("driver_attach() failed for %s with error %d\n", pr_warn 781 drivers/interconnect/core.c pr_warn("interconnect provider still has %d users\n", pr_warn 788 drivers/interconnect/core.c pr_warn("interconnect provider still has nodes\n"); pr_warn 1638 drivers/iommu/amd_iommu.c pr_warn("AMD-Vi: IOMMU pte changed since we read it\n"); pr_warn 4294 drivers/iommu/amd_iommu.c pr_warn("Failed to allocate IRTE\n"); pr_warn 876 drivers/iommu/amd_iommu_init.c pr_warn("Translation is already enabled - trying to copy translation structures\n"); pr_warn 1357 drivers/iommu/amd_iommu_init.c pr_warn(FW_BUG "Invalid UID length.\n"); pr_warn 1567 drivers/iommu/amd_iommu_init.c pr_warn("Translation was enabled for IOMMU:%d but we are not in kdump mode\n", pr_warn 322 drivers/iommu/dma-iommu.c pr_warn("specified DMA range outside IOMMU capability\n"); pr_warn 334 drivers/iommu/dma-iommu.c pr_warn("Incompatible range for DMA domain\n"); pr_warn 1134 drivers/iommu/dma-iommu.c pr_warn("Failed to set up IOMMU for device %s; retaining platform DMA ops\n", pr_warn 94 drivers/iommu/dmar.c pr_warn("Unsupported device scope\n"); pr_warn 150 drivers/iommu/dmar.c pr_warn("Out of memory when allocating notify_info " pr_warn 256 drivers/iommu/dmar.c pr_warn("Device scope type does not match for %s\n", pr_warn 452 drivers/iommu/dmar.c pr_warn(FW_BUG pr_warn 484 drivers/iommu/dmar.c pr_warn(FW_BUG pr_warn 549 drivers/iommu/dmar.c pr_warn("Unable to map DMAR\n"); pr_warn 570 drivers/iommu/dmar.c pr_warn(FW_BUG "Record passes table end\n"); pr_warn 588 drivers/iommu/dmar.c pr_warn("No handler for DMAR structure type %d\n", pr_warn 641 drivers/iommu/dmar.c pr_warn("Invalid DMAR haw\n"); pr_warn 648 drivers/iommu/dmar.c pr_warn(FW_BUG "No DRHD structure found in DMAR table\n"); pr_warn 739 drivers/iommu/dmar.c pr_warn("No IOMMU scope found for ANDD enumeration ID %d (%s)\n", pr_warn 868 drivers/iommu/dmar.c pr_warn("Can't validate DRHD address: %llx\n", drhd->address); pr_warn 2030 drivers/iommu/dmar.c pr_warn(FW_BUG "No DRHD structures in buffer returned by _DSM method\n"); pr_warn 2117 drivers/iommu/dmar.c pr_warn("Failed to locate _DSM method.\n"); pr_warn 3242 drivers/iommu/intel-iommu.c pr_warn("Translation was enabled for %s but we are not in kdump mode\n", pr_warn 4444 drivers/iommu/intel-iommu.c pr_warn("%s: Doesn't support hardware pass through.\n", pr_warn 4450 drivers/iommu/intel-iommu.c pr_warn("%s: Doesn't support snooping.\n", pr_warn 4456 drivers/iommu/intel-iommu.c pr_warn("%s: Doesn't support large page.\n", pr_warn 4661 drivers/iommu/intel-iommu.c pr_warn("Failed to build identity map for [%llx-%llx]\n", pr_warn 4687 drivers/iommu/intel-iommu.c pr_warn("Failed to split IOVA PFN [%lx-%lx]\n", pr_warn 5038 drivers/iommu/intel-iommu.c pr_warn("ACPI name space devices didn't probe correctly\n"); pr_warn 5186 drivers/iommu/intel-iommu.c pr_warn("iova flush queue initialization failed\n"); pr_warn 6128 drivers/iommu/intel-iommu.c pr_warn("Recommended TLB entries for ISOCH unit is 16; your BIOS set %d\n", pr_warn 48 drivers/iommu/intel-svm.c pr_warn("IOMMU: %s: Failed to allocate page request queue\n", pr_warn 131 drivers/iommu/intel_irq_remapping.c pr_warn("IR%d: can't allocate an IRTE\n", iommu->seq_id); pr_warn 327 drivers/iommu/intel_irq_remapping.c pr_warn("Failed to set source-id of IOAPIC (%d)\n", apic); pr_warn 354 drivers/iommu/intel_irq_remapping.c pr_warn("Failed to set source-id of HPET block (%d)\n", id); pr_warn 601 drivers/iommu/intel_irq_remapping.c pr_warn("IRQ remapping was enabled on %s but we are not in kdump mode\n", pr_warn 703 drivers/iommu/intel_irq_remapping.c pr_warn("Failed to enable irq remapping. You are vulnerable to irq-injection attacks.\n"); pr_warn 713 drivers/iommu/intel_irq_remapping.c pr_warn("This system BIOS has enabled interrupt remapping\n" pr_warn 865 drivers/iommu/intel_irq_remapping.c pr_warn("Exceeded Max HPET blocks\n"); pr_warn 910 drivers/iommu/intel_irq_remapping.c pr_warn("Exceeded Max IO APICS\n"); pr_warn 1380 drivers/iommu/intel_irq_remapping.c pr_warn("Failed to allocate IRTE\n"); pr_warn 1465 drivers/iommu/intel_irq_remapping.c pr_warn("DRHD %Lx: failed to parse managed IOAPIC/HPET\n", pr_warn 35 drivers/iommu/iommu-debugfs.c pr_warn("\n"); pr_warn 36 drivers/iommu/iommu-debugfs.c pr_warn("*************************************************************\n"); pr_warn 37 drivers/iommu/iommu-debugfs.c pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n"); pr_warn 38 drivers/iommu/iommu-debugfs.c pr_warn("** **\n"); pr_warn 39 drivers/iommu/iommu-debugfs.c pr_warn("** IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **\n"); pr_warn 40 drivers/iommu/iommu-debugfs.c pr_warn("** **\n"); pr_warn 41 drivers/iommu/iommu-debugfs.c pr_warn("** This means that this kernel is built to expose internal **\n"); pr_warn 42 drivers/iommu/iommu-debugfs.c pr_warn("** IOMMU data structures, which may compromise security on **\n"); pr_warn 43 drivers/iommu/iommu-debugfs.c pr_warn("** your system. **\n"); pr_warn 44 drivers/iommu/iommu-debugfs.c pr_warn("** **\n"); pr_warn 45 drivers/iommu/iommu-debugfs.c pr_warn("** If you see this message and you are not debugging the **\n"); pr_warn 46 drivers/iommu/iommu-debugfs.c pr_warn("** kernel, report this immediately to your vendor! **\n"); pr_warn 47 drivers/iommu/iommu-debugfs.c pr_warn("** **\n"); pr_warn 48 drivers/iommu/iommu-debugfs.c pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n"); pr_warn 49 drivers/iommu/iommu-debugfs.c pr_warn("*************************************************************\n"); pr_warn 183 drivers/irqchip/exynos-combiner.c pr_warn("%s: could not allocate combiner data\n", __func__); pr_warn 190 drivers/irqchip/exynos-combiner.c pr_warn("%s: irq domain init failed\n", __func__); pr_warn 126 drivers/irqchip/irq-atmel-aic-common.c pr_warn("AIC: external irq %d >= %d skip it\n", pr_warn 108 drivers/irqchip/irq-ftintc010.c pr_warn("Faraday IRQ: no supported trigger selected for line %d\n", pr_warn 1677 drivers/irqchip/irq-gic-v3-its.c pr_warn("GICv3: Expected reserved range [%pa:%pa], not found\n", pr_warn 1769 drivers/irqchip/irq-gic-v3-its.c pr_warn("ITS@%pa: %s too large, reduce ITS pages %u->%u\n", pr_warn 1925 drivers/irqchip/irq-gic-v3-its.c pr_warn("ITS@%pa: %s Table too large, reduce ids %u->%u\n", pr_warn 3581 drivers/irqchip/irq-gic-v3-its.c pr_warn("ITS@%pa: Unable to map ITS registers\n", &res->start); pr_warn 3587 drivers/irqchip/irq-gic-v3-its.c pr_warn("ITS@%pa: No ITS detected, giving up\n", &res->start); pr_warn 3594 drivers/irqchip/irq-gic-v3-its.c pr_warn("ITS@%pa: Failed to quiesce, giving up\n", &res->start); pr_warn 3746 drivers/irqchip/irq-gic-v3-its.c pr_warn("GICv3: CPU%d: Booted with LPIs enabled, memory probably corrupted\n", pr_warn 3816 drivers/irqchip/irq-gic-v3-its.c pr_warn("%pOF: no msi-controller property, ITS ignored\n", pr_warn 3822 drivers/irqchip/irq-gic-v3-its.c pr_warn("%pOF: no regs?\n", np); pr_warn 3909 drivers/irqchip/irq-gic-v3-its.c pr_warn("SRAT: Failed to allocate memory for its_srat_maps!\n"); pr_warn 3997 drivers/irqchip/irq-gic-v3-its.c pr_warn("ITS: No ITS available, not enabling LPIs\n"); pr_warn 556 drivers/irqchip/irq-gic-v3.c pr_warn("GIC: PPI INTID%d is secure or misconfigured\n", irq); pr_warn 778 drivers/irqchip/irq-gic-v3.c pr_warn("No redistributor present @%p\n", ptr); pr_warn 1494 drivers/irqchip/irq-gic-v3.c pr_warn("SCR_EL3.FIQ is cleared, cannot enable use of pseudo-NMIs\n"); pr_warn 2014 drivers/irqchip/irq-gic-v3.c pr_warn("Unable to get hardware information used for virtualization\n"); pr_warn 308 drivers/irqchip/irq-gic.c pr_warn("GIC: PPI%d is secure or misconfigured\n", gicirq - 16); pr_warn 1293 drivers/irqchip/irq-gic.c pr_warn("GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set\n"); pr_warn 1306 drivers/irqchip/irq-gic.c pr_warn("GIC: GICv2 at %pa, but range is too small (broken DT?), assuming 8kB\n", pr_warn 1323 drivers/irqchip/irq-gic.c pr_warn("GIC: Aliased GICv2 at %pa, trying to find the canonical range over 128kB\n", pr_warn 1346 drivers/irqchip/irq-gic.c pr_warn("GIC: Adjusting CPU interface base to %pa\n", pr_warn 136 drivers/irqchip/irq-hip04.c pr_warn("GIC: PPI%d is secure or misconfigured\n", irq - 16); pr_warn 117 drivers/irqchip/irq-imx-irqsteer.c pr_warn("%s: unable to get hwirq base for irq %d\n", pr_warn 121 drivers/irqchip/irq-ls-scfg-msi.c pr_warn("cannot bind the irq to cpu%d\n", cpu); pr_warn 702 drivers/irqchip/irq-mips-gic.c pr_warn("Using inherited base address %pa\n", pr_warn 95 drivers/irqchip/irq-nvic.c pr_warn("unable to map nvic registers\n"); pr_warn 107 drivers/irqchip/irq-nvic.c pr_warn("Failed to allocate irq domain\n"); pr_warn 115 drivers/irqchip/irq-nvic.c pr_warn("Failed to allocate irq chips\n"); pr_warn 196 drivers/irqchip/irq-omap-intc.c pr_warn("Failed to allocate irq chips\n"); pr_warn 273 drivers/irqchip/irq-omap-intc.c pr_warn("Couldn't allocate IRQ numbers\n"); pr_warn 202 drivers/irqchip/irq-pic32-evic.c pr_warn("More than %d external irq, skip rest\n", pr_warn 174 drivers/irqchip/irq-s3c24xx.c pr_warn("No edge setting!\n"); pr_warn 1269 drivers/irqchip/irq-s3c24xx.c pr_warn("irq: parent of %s missing\n", pr_warn 218 drivers/irqchip/irq-sifive-plic.c pr_warn("PLIC already present.\n"); pr_warn 261 drivers/irqchip/irq-sifive-plic.c pr_warn("failed to parse hart ID for context %d.\n", i); pr_warn 267 drivers/irqchip/irq-sifive-plic.c pr_warn("Invalid cpuid for context %d\n", i); pr_warn 278 drivers/irqchip/irq-sifive-plic.c pr_warn("handler already present for context %d.\n", i); pr_warn 182 drivers/irqchip/irq-xilinx-intc.c pr_warn("irq-xilinx: unable to read xlnx,kind-of-intr\n"); pr_warn 187 drivers/irqchip/irq-xilinx-intc.c pr_warn("irq-xilinx: mismatch in kind-of-intr param\n"); pr_warn 243 drivers/irqchip/spear-shirq.c pr_warn("%s: irq domain init failed\n", __func__); pr_warn 2099 drivers/isdn/hardware/mISDN/hfcsusb.c pr_warn("%s: No memory for control urb\n", pr_warn 384 drivers/leds/led-triggers.c pr_warn("LED trigger %s failed to register (%d)\n", pr_warn 388 drivers/leds/led-triggers.c pr_warn("LED trigger %s failed to register (no memory)\n", pr_warn 716 drivers/lightnvm/pblk.h pr_warn("pblk %s: " fmt, pblk->disk->disk_name, ##__VA_ARGS__) pr_warn 339 drivers/macintosh/adb.c pr_warn("Warning: no ADB interface detected\n"); pr_warn 821 drivers/macintosh/via-pmu.c pr_warn("pmu.c: unrecognized battery info, " pr_warn 74 drivers/macintosh/windfarm_cpufreq_clamp.c pr_warn("%s: cpufreq policy not found cpu0\n", __func__); pr_warn 94 drivers/macintosh/windfarm_cpufreq_clamp.c pr_warn("%s: No cpu device for cpu0\n", __func__); pr_warn 457 drivers/mailbox/pcc.c pr_warn("Error parsing PCC subspaces from PCCT\n"); pr_warn 459 drivers/mailbox/pcc.c pr_warn("Invalid PCCT: %d PCC subspaces\n", count); pr_warn 860 drivers/md/bcache/btree.c pr_warn("bcache: %s: could not register shrinker", pr_warn 1854 drivers/md/bcache/btree.c pr_warn("gc failed!"); pr_warn 632 drivers/md/bcache/super.c pr_warn("bad csum reading priorities"); pr_warn 635 drivers/md/bcache/super.c pr_warn("bad magic reading priorities"); pr_warn 1004 drivers/md/bcache/super.c pr_warn("failed to create bcache_status_update kthread, " pr_warn 1032 drivers/md/bcache/super.c pr_warn("give up waiting for dc->writeback_write_update to quit"); pr_warn 1675 drivers/md/bcache/super.c pr_warn("stop_when_cache_set_failed of %s is \"always\", stop it for failed cache set %pU.", pr_warn 1683 drivers/md/bcache/super.c pr_warn("stop_when_cache_set_failed of %s is \"auto\" and cache is dirty, stop it to avoid potential data corruption.", pr_warn 1705 drivers/md/bcache/super.c pr_warn("stop_when_cache_set_failed of %s is \"auto\" and cache is clean, keep it alive.", pr_warn 2657 drivers/md/bcache/super.c pr_warn("set bch_cutoff_writeback_sync (%u) to max value %u", pr_warn 2665 drivers/md/bcache/super.c pr_warn("set bch_cutoff_writeback (%u) to max value %u", pr_warn 2671 drivers/md/bcache/super.c pr_warn("set bch_cutoff_writeback (%u) to %u", pr_warn 872 drivers/md/bcache/sysfs.c pr_warn("CACHE_SET_IO_DISABLE already set"); pr_warn 876 drivers/md/bcache/sysfs.c pr_warn("CACHE_SET_IO_DISABLE already cleared"); pr_warn 801 drivers/md/bcache/writeback.c pr_warn("sectors dirty init failed, ret=%d!", ret); pr_warn 541 drivers/md/md-bitmap.c pr_warn("bitmap chunksize not a power of 2\n"); pr_warn 669 drivers/md/md-bitmap.c pr_warn("%s: invalid bitmap file superblock: %s\n", pr_warn 683 drivers/md/md-bitmap.c pr_warn("%s: bitmap superblock UUID mismatch\n", pr_warn 689 drivers/md/md-bitmap.c pr_warn("%s: bitmap file is out of date (%llu < %llu) -- forcing full recovery\n", pr_warn 711 drivers/md/md-bitmap.c pr_warn("%s: Could not setup cluster service (%d)\n", pr_warn 879 drivers/md/md-bitmap.c pr_warn("%s: kicking failed bitmap file %s from array!\n", pr_warn 884 drivers/md/md-bitmap.c pr_warn("%s: disabling internal bitmap due to errors\n", pr_warn 1091 drivers/md/md-bitmap.c pr_warn("%s: bitmap file is out of date, doing full recovery\n", bmname(bitmap)); pr_warn 1094 drivers/md/md-bitmap.c pr_warn("%s: bitmap file too short %lu < %lu\n", pr_warn 1178 drivers/md/md-bitmap.c pr_warn("%s: bitmap initialisation failed: %d\n", pr_warn 2181 drivers/md/md-bitmap.c pr_warn("Could not pre-allocate in-memory bitmap for cluster raid\n"); pr_warn 368 drivers/md/md-cluster.c pr_warn("md-cluster: Could not create recovery thread\n"); pr_warn 553 drivers/md/md-cluster.c pr_warn("%s: %d Could not find disk(%d) to REMOVE\n", pr_warn 567 drivers/md/md-cluster.c pr_warn("%s: %d Could not find disk(%d) which is faulty", pr_warn 612 drivers/md/md-cluster.c pr_warn("%s:%d Received unknown message from %d\n", pr_warn 836 drivers/md/md-cluster.c pr_warn("md-cluster: Could not gather bitmaps from slot %d", i); pr_warn 1090 drivers/md/md-cluster.c pr_warn("md-cluster: No good device id found to send\n"); pr_warn 1454 drivers/md/md-cluster.c pr_warn("md-cluster(%s): Spurious cluster confirmation\n", mdname(mddev)); pr_warn 1543 drivers/md/md-cluster.c pr_warn("md-cluster: Could not gather bitmaps from slot %d", sn); pr_warn 1579 drivers/md/md-cluster.c pr_warn("md-cluster: support raid1 and raid10 (limited support)\n"); pr_warn 105 drivers/md/md-linear.c pr_warn("md/linear:%s: disk numbering problem. Aborting!\n", pr_warn 127 drivers/md/md-linear.c pr_warn("md/linear:%s: not enough drives present. Aborting!\n", pr_warn 190 drivers/md/md-multipath.c pr_warn("multipath: only one IO path left and IO error.\n"); pr_warn 283 drivers/md/md-multipath.c pr_warn("hot-remove-disk, slot %d is identified but is still operational!\n", number); pr_warn 378 drivers/md/md-multipath.c pr_warn("multipath: %s: raid level not set to multipath IO (%d)\n", pr_warn 421 drivers/md/md-multipath.c pr_warn("multipath: no operational IO paths for %s\n", pr_warn 1094 drivers/md/md.c pr_warn("%s: bitmaps are not supported for %s\n", pr_warn 1128 drivers/md/md.c pr_warn("md: invalid raid superblock magic on %s\n", b); pr_warn 1135 drivers/md/md.c pr_warn("Bad version number %d.%d on %s\n", pr_warn 1144 drivers/md/md.c pr_warn("md: invalid superblock checksum on %s\n", b); pr_warn 1176 drivers/md/md.c pr_warn("md: %s has different UUID to %s\n", pr_warn 1181 drivers/md/md.c pr_warn("md: %s has same UUID but different superblock to %s\n", pr_warn 1591 drivers/md/md.c pr_warn("md: invalid superblock checksum on %s\n", pr_warn 1596 drivers/md/md.c pr_warn("md: data_size too small on %s\n", pr_warn 1703 drivers/md/md.c pr_warn("md: %s has strangely different superblock to %s\n", pr_warn 1861 drivers/md/md.c pr_warn("md: journal device provided without journal feature, ignoring the device\n"); pr_warn 2329 drivers/md/md.c pr_warn("md: %s: array is limited to %d devices\n", pr_warn 2359 drivers/md/md.c pr_warn("md: failed to register dev-%s for %s\n", pr_warn 2408 drivers/md/md.c pr_warn("md: could not open %s.\n", __bdevname(dev, b)); pr_warn 3596 drivers/md/md.c pr_warn("md: %s has zero or unknown size, marking faulty!\n", pr_warn 3606 drivers/md/md.c pr_warn("md: %s does not have a valid v%d.%d superblock, not importing!\n", pr_warn 3612 drivers/md/md.c pr_warn("md: could not read %s's sb, not importing!\n", pr_warn 3648 drivers/md/md.c pr_warn("md: fatal superblock inconsistency in %s -- removing from array\n", pr_warn 3655 drivers/md/md.c pr_warn("md: cannot find a valid disk\n"); pr_warn 3667 drivers/md/md.c pr_warn("md: %s: %s: only %d devices permitted\n", pr_warn 3676 drivers/md/md.c pr_warn("md: kicking non-fresh %s from array!\n", pr_warn 3745 drivers/md/md.c pr_warn("md: Safemode is disabled for clustered mode\n"); pr_warn 3833 drivers/md/md.c pr_warn("md: %s: %s does not support online personality change\n", pr_warn 3852 drivers/md/md.c pr_warn("md: personality %s not loaded\n", clevel); pr_warn 3866 drivers/md/md.c pr_warn("md: %s: %s does not support personality takeover\n", pr_warn 3887 drivers/md/md.c pr_warn("md: %s: %s would not accept array\n", pr_warn 3931 drivers/md/md.c pr_warn("md: cannot register extra attributes for %s\n", pr_warn 3963 drivers/md/md.c pr_warn("md: cannot register rd%d for %s after level change\n", pr_warn 5655 drivers/md/md.c pr_warn("md: %s: data overlaps metadata\n", pr_warn 5662 drivers/md/md.c pr_warn("md: %s: metadata overlaps data\n", pr_warn 5686 drivers/md/md.c pr_warn("md: personality for level %d is not loaded!\n", pr_warn 5689 drivers/md/md.c pr_warn("md: personality for level %s is not loaded!\n", pr_warn 5722 drivers/md/md.c pr_warn("%s: WARNING: %s appears to be on the same physical disk as %s.\n", pr_warn 5731 drivers/md/md.c pr_warn("True protection against single-disk failure might be compromised.\n"); pr_warn 5745 drivers/md/md.c pr_warn("md: pers->run() failed ...\n"); pr_warn 5750 drivers/md/md.c pr_warn("md: invalid array_size %llu > default size %llu\n", pr_warn 5762 drivers/md/md.c pr_warn("%s: failed to create bitmap (%d)\n", pr_warn 5812 drivers/md/md.c pr_warn("md: cannot register extra attributes for %s\n", pr_warn 6112 drivers/md/md.c pr_warn("md: %s still in use.\n",mdname(mddev)); pr_warn 6174 drivers/md/md.c pr_warn("md: %s still in use.\n",mdname(mddev)); pr_warn 6252 drivers/md/md.c pr_warn("md: do_md_run() returned %d\n", err); pr_warn 6305 drivers/md/md.c pr_warn("md: unit number in %s is bad: %d\n", pr_warn 6318 drivers/md/md.c pr_warn("md: %s locked, cannot run\n", mdname(mddev)); pr_warn 6321 drivers/md/md.c pr_warn("md: %s already running, cannot run %s\n", pr_warn 6502 drivers/md/md.c pr_warn("%s: Cannot add to clustered mddev.\n", pr_warn 6515 drivers/md/md.c pr_warn("md: md_import_device returned %ld\n", pr_warn 6526 drivers/md/md.c pr_warn("md: %s has different UUID to %s\n", pr_warn 6547 drivers/md/md.c pr_warn("%s: personality does not support diskops!\n", pr_warn 6557 drivers/md/md.c pr_warn("md: md_import_device returned %ld\n", pr_warn 6657 drivers/md/md.c pr_warn("%s: ADD_NEW_DISK not supported\n", mdname(mddev)); pr_warn 6665 drivers/md/md.c pr_warn("md: error, md_import_device() returned %ld\n", pr_warn 6751 drivers/md/md.c pr_warn("%s: HOT_ADD may only be used with version-0 superblocks.\n", pr_warn 6756 drivers/md/md.c pr_warn("%s: personality does not support diskops!\n", pr_warn 6763 drivers/md/md.c pr_warn("md: error, md_import_device() returned %ld\n", pr_warn 6776 drivers/md/md.c pr_warn("md: can not hot-add faulty %s disk to %s!\n", pr_warn 6834 drivers/md/md.c pr_warn("%s: error: failed to get bitmap file\n", pr_warn 6841 drivers/md/md.c pr_warn("%s: error: bitmap file must be a regular file\n", pr_warn 6845 drivers/md/md.c pr_warn("%s: error: bitmap file must open for write\n", pr_warn 6849 drivers/md/md.c pr_warn("%s: error: bitmap file is already in use\n", pr_warn 6919 drivers/md/md.c pr_warn("md: superblock version %d not known\n", pr_warn 7192 drivers/md/md.c pr_warn("md: can't change bitmap to none since the array is in use by more than one node\n"); pr_warn 7397 drivers/md/md.c pr_warn("md: couldn't update array info. %d\n", err); pr_warn 7403 drivers/md/md.c pr_warn("md: array %s already has disks!\n", mdname(mddev)); pr_warn 7408 drivers/md/md.c pr_warn("md: array %s already initialised!\n", mdname(mddev)); pr_warn 7414 drivers/md/md.c pr_warn("md: couldn't set array info. %d\n", err); pr_warn 8200 drivers/md/md.c pr_warn("can't find md-cluster module or get it's reference.\n"); pr_warn 8923 drivers/md/md.c pr_warn("%s: could not start resync thread...\n", pr_warn 9470 drivers/md/md.c pr_warn("%s: %d Could not reload rdev(%d) err: %d. Restoring old values\n", pr_warn 9511 drivers/md/md.c pr_warn("%s: %d Could not find rdev with nr %d\n", __func__, __LINE__, nr); pr_warn 751 drivers/md/md.h pr_warn("md: %s: %s array has a missing/failed member\n", pr_warn 166 drivers/md/raid0.c pr_warn("md/raid0:%s: chunk_size of %d not multiple of block size %d\n", pr_warn 212 drivers/md/raid0.c pr_warn("md/raid0:%s: remove inactive devices before converting to RAID0\n", pr_warn 217 drivers/md/raid0.c pr_warn("md/raid0:%s: bad disk number %d - aborting!\n", pr_warn 222 drivers/md/raid0.c pr_warn("md/raid0:%s: multiple devices for %d - aborting!\n", pr_warn 233 drivers/md/raid0.c pr_warn("md/raid0:%s: too few disks (%d of %d) - aborting!\n", pr_warn 382 drivers/md/raid0.c pr_warn("md/raid0:%s: chunk size must be set.\n", mdname(mddev)); pr_warn 652 drivers/md/raid0.c pr_warn("md/raid0:%s: raid5 must be degraded! Degraded disks: %d\n", pr_warn 661 drivers/md/raid0.c pr_warn("md/raid0:%s: raid5 must have missing parity disk!\n", pr_warn 694 drivers/md/raid0.c pr_warn("md/raid0:%s:: Raid0 cannot takeover layout: 0x%x\n", pr_warn 700 drivers/md/raid0.c pr_warn("md/raid0:%s: Raid0 cannot takeover Raid10 with odd disk number.\n", pr_warn 705 drivers/md/raid0.c pr_warn("md/raid0:%s: All mirrors must be already degraded!\n", pr_warn 778 drivers/md/raid0.c pr_warn("md/raid0: %s: cannot takeover array with bitmap\n", pr_warn 789 drivers/md/raid0.c pr_warn("md/raid0:%s: Raid can only takeover Raid5 with layout: %d\n", pr_warn 799 drivers/md/raid0.c pr_warn("Takeover from raid%i to raid0 not supported\n", pr_warn 3087 drivers/md/raid1.c pr_warn("md/raid1:%s: raid level not set to mirroring (%d)\n", pr_warn 3092 drivers/md/raid1.c pr_warn("md/raid1:%s: reshape_position set but not supported\n", pr_warn 3308 drivers/md/raid1.c pr_warn("md/raid1:%s: cannot register rd%d\n", pr_warn 3251 drivers/md/raid10.c pr_warn("md/raid10:%s: insufficient working devices for recovery.\n", pr_warn 3641 drivers/md/raid10.c pr_warn("md/raid10:%s: chunk size must be at least PAGE_SIZE(%ld) and be a power of 2.\n", pr_warn 3647 drivers/md/raid10.c pr_warn("md/raid10:%s: unsupported raid10 layout: 0x%8x\n", pr_warn 3914 drivers/md/raid10.c pr_warn("md/raid10: offset difference not enough to continue reshape\n"); pr_warn 4016 drivers/md/raid10.c pr_warn("md/raid10:%s: Error: degraded raid0!\n", pr_warn 4057 drivers/md/raid10.c pr_warn("md/raid10:%s: cannot takeover raid 0 with more than one zone.\n", pr_warn 4247 drivers/md/raid10.c pr_warn("md/raid10:%s: array size must be reduce before number of disks\n", pr_warn 1223 drivers/md/raid5-ppl.c pr_warn("md/raid:%s: PPL header signature does not match on all member drives\n", pr_warn 1280 drivers/md/raid5-ppl.c pr_warn("md/raid:%s: PPL space too small on %s\n", pr_warn 1291 drivers/md/raid5-ppl.c pr_warn("md/raid:%s: PPL space overlaps with data on %s\n", pr_warn 1299 drivers/md/raid5-ppl.c pr_warn("md/raid:%s: PPL space overlaps with superblock on %s\n", pr_warn 1346 drivers/md/raid5-ppl.c pr_warn("md/raid:%s PPL is not compatible with raid level %d\n", pr_warn 1352 drivers/md/raid5-ppl.c pr_warn("md/raid:%s PPL is not compatible with bitmap\n", pr_warn 1358 drivers/md/raid5-ppl.c pr_warn("md/raid:%s PPL is not compatible with journal\n", pr_warn 1366 drivers/md/raid5-ppl.c pr_warn("md/raid:%s PPL doesn't support over %d disks in the array\n", pr_warn 2555 drivers/md/raid5.c pr_warn("md/raid:%s: %d read_errors > %d stripes\n", pr_warn 2559 drivers/md/raid5.c pr_warn("md/raid:%s: Too many read errors, failing device %s.\n", pr_warn 3028 drivers/md/raid5.c pr_warn("md/raid:%s: compute_blocknr: map not correct\n", pr_warn 4296 drivers/md/raid5.c pr_warn("%s: unknown check_state: %d sector: %llu\n", pr_warn 6820 drivers/md/raid5.c pr_warn("%s: failed memory allocation for cpu%u\n", pr_warn 6892 drivers/md/raid5.c pr_warn("md/raid:%s: raid level not set to 4/5/6 (%d)\n", pr_warn 6900 drivers/md/raid5.c pr_warn("md/raid:%s: layout %d not supported\n", pr_warn 6905 drivers/md/raid5.c pr_warn("md/raid:%s: not enough configured devices (%d, minimum 4)\n", pr_warn 6913 drivers/md/raid5.c pr_warn("md/raid:%s: invalid chunk size %d\n", pr_warn 7084 drivers/md/raid5.c pr_warn("md/raid:%s: couldn't allocate %dkB for buffers\n", pr_warn 7100 drivers/md/raid5.c pr_warn("md/raid:%s: couldn't register shrinker.\n", pr_warn 7108 drivers/md/raid5.c pr_warn("md/raid:%s: couldn't allocate thread.\n", pr_warn 7216 drivers/md/raid5.c pr_warn("md/raid:%s: don't support reshape with journal - aborting.\n", pr_warn 7222 drivers/md/raid5.c pr_warn("md/raid:%s: unsupported reshape required - aborting.\n", pr_warn 7238 drivers/md/raid5.c pr_warn("md/raid:%s: reshape_position not on a stripe boundary\n", pr_warn 7260 drivers/md/raid5.c pr_warn("md/raid:%s: in-place reshape must be started in read-only mode - aborting\n", pr_warn 7270 drivers/md/raid5.c pr_warn("md/raid:%s: reshape_position too early for auto-recovery - aborting.\n", pr_warn 7285 drivers/md/raid5.c pr_warn("md/raid:%s: using journal device and PPL not allowed - disabling PPL\n", pr_warn 7301 drivers/md/raid5.c pr_warn("md/raid:%s: journal disk is missing, force array readonly\n", pr_warn 7329 drivers/md/raid5.c pr_warn("md: cannot handle concurrent replacement and reshape.\n"); pr_warn 7420 drivers/md/raid5.c pr_warn("raid5: failed to create sysfs attributes for %s\n", pr_warn 7499 drivers/md/raid5.c pr_warn("md/raid:%s: failed to run raid set.\n", mdname(mddev)); pr_warn 7809 drivers/md/raid5.c pr_warn("md/raid:%s: reshape: not enough stripes. Needed %lu\n", pr_warn 7896 drivers/md/raid5.c pr_warn("md/raid:%s: array size must be reduced before number of disks\n", pr_warn 8108 drivers/md/raid5.c pr_warn("md/raid:%s: cannot takeover raid0 with more than one zone.\n", pr_warn 511 drivers/media/cec/cec-adap.c pr_warn("cec-%s: message %*ph timed out\n", adap->name, pr_warn 518 drivers/media/cec/cec-adap.c pr_warn("cec-%s: transmit timed out\n", adap->name); pr_warn 388 drivers/media/cec/cec-core.c pr_warn("cec-%s: Failed to create debugfs dir\n", adap->name); pr_warn 394 drivers/media/cec/cec-core.c pr_warn("cec-%s: Failed to create status file\n", adap->name); pr_warn 405 drivers/media/cec/cec-core.c pr_warn("cec-%s: Failed to create error-inj file\n", pr_warn 455 drivers/media/cec/cec-core.c pr_warn("cec: unable to allocate major\n"); pr_warn 462 drivers/media/cec/cec-core.c pr_warn("cec: Failed to create debugfs cec dir\n"); pr_warn 470 drivers/media/cec/cec-core.c pr_warn("cec: bus_register failed\n"); pr_warn 323 drivers/media/common/saa7146/saa7146_core.c pr_warn("%s: unexpected i2c irq: isr %08x psr %08x ssr %08x\n", pr_warn 205 drivers/media/common/saa7146/saa7146_i2c.c pr_warn("%s %s [irq]: timed out waiting for end of xfer\n", pr_warn 223 drivers/media/common/saa7146/saa7146_i2c.c pr_warn("%s %s: timed out waiting for MC2\n", pr_warn 240 drivers/media/common/saa7146/saa7146_i2c.c pr_warn("%s %s [poll]: timed out waiting for end of xfer\n", pr_warn 489 drivers/media/common/tveeprom.c pr_warn("Encountered bad packet header [%02x]. Corrupt or not a Hauppauge eeprom.\n", pr_warn 642 drivers/media/common/tveeprom.c pr_warn("Ran out of data!\n"); pr_warn 751 drivers/media/common/tveeprom.c pr_warn("i2c eeprom read error (err=%d)\n", err); pr_warn 1885 drivers/media/common/videobuf2/videobuf2-core.c pr_warn("driver bug: stop_streaming operation is leaving buf %p in active state\n", pr_warn 89 drivers/media/common/videobuf2/videobuf2-dvb.c pr_warn("%s: dvb_register_adapter failed (errno = %d)\n", pr_warn 109 drivers/media/common/videobuf2/videobuf2-dvb.c pr_warn("%s: dvb_register_frontend failed (errno = %d)\n", pr_warn 125 drivers/media/common/videobuf2/videobuf2-dvb.c pr_warn("%s: dvb_dmx_init failed (errno = %d)\n", pr_warn 136 drivers/media/common/videobuf2/videobuf2-dvb.c pr_warn("%s: dvb_dmxdev_init failed (errno = %d)\n", pr_warn 144 drivers/media/common/videobuf2/videobuf2-dvb.c pr_warn("%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n", pr_warn 152 drivers/media/common/videobuf2/videobuf2-dvb.c pr_warn("%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n", pr_warn 159 drivers/media/common/videobuf2/videobuf2-dvb.c pr_warn("%s: connect_frontend failed (errno = %d)\n", pr_warn 167 drivers/media/common/videobuf2/videobuf2-dvb.c pr_warn("%s: dvb_net_init failed (errno = %d)\n", pr_warn 206 drivers/media/common/videobuf2/videobuf2-dvb.c pr_warn("Unable to register the adapter which has no frontends\n"); pr_warn 214 drivers/media/common/videobuf2/videobuf2-dvb.c pr_warn("vb2_dvb_register_adapter failed (errno = %d)\n", res); pr_warn 224 drivers/media/common/videobuf2/videobuf2-dvb.c pr_warn("%s: vb2_dvb_register_frontend failed (errno = %d)\n", pr_warn 162 drivers/media/common/videobuf2/videobuf2-v4l2.c pr_warn("use of bytesused == 0 is deprecated and will be removed in the future,\n"); pr_warn 164 drivers/media/common/videobuf2/videobuf2-v4l2.c pr_warn("use VIDIOC_DECODER_CMD(V4L2_DEC_CMD_STOP) instead.\n"); pr_warn 166 drivers/media/common/videobuf2/videobuf2-v4l2.c pr_warn("use the actual size instead.\n"); pr_warn 1274 drivers/media/dvb-core/dvb_demux.c pr_warn("Couldn't allocate memory for TS/TEI check. Disabling it\n"); pr_warn 336 drivers/media/dvb-core/dvb_net.c pr_warn("%lu: Invalid TS cell: SYNC %#x, TEI %u, SC %#x.\n", pr_warn 398 drivers/media/dvb-core/dvb_net.c pr_warn("%lu: TS discontinuity: got %#x, expected %#x.\n", pr_warn 428 drivers/media/dvb-core/dvb_net.c pr_warn("%lu: Invalid pointer field: %u.\n", pr_warn 467 drivers/media/dvb-core/dvb_net.c pr_warn("%lu: Expected %d more SNDU bytes, but got PUSI (pf %d, h->ts_remain %d). Flushing incomplete payload.\n", pr_warn 496 drivers/media/dvb-core/dvb_net.c pr_warn("Invalid payload packing: only %d bytes left in TS. Resyncing.\n", pr_warn 516 drivers/media/dvb-core/dvb_net.c pr_warn("%lu: Invalid ULE SNDU length %u. Resyncing.\n", pr_warn 651 drivers/media/dvb-core/dvb_net.c pr_warn("%lu: CRC32 check FAILED: %08x / %08x, SNDU len %d type %#x, ts_remain %d, next 2: %x.\n", pr_warn 881 drivers/media/dvb-core/dvb_net.c pr_warn("buffer2 not NULL: %p.\n", buffer2); pr_warn 883 drivers/media/dvb-core/dvb_net.c pr_warn("length > 32k: %zu.\n", buffer1_len); pr_warn 901 drivers/media/dvb-core/dvb_net.c pr_warn("%s: IP/MPE packet length = %d too small.\n", pr_warn 43 drivers/media/dvb-frontends/cx24120.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 50 drivers/media/dvb-frontends/cxd2841er.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 57 drivers/media/dvb-frontends/cxd2841er.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 24 drivers/media/dvb-frontends/cxd2880/cxd2880.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 91 drivers/media/dvb-frontends/dib0070.c pr_warn("DiB0070 I2C read failed\n"); pr_warn 120 drivers/media/dvb-frontends/dib0070.c pr_warn("DiB0070 I2C write failed\n"); pr_warn 222 drivers/media/dvb-frontends/dib0090.c pr_warn("DiB0090 I2C read failed\n"); pr_warn 252 drivers/media/dvb-frontends/dib0090.c pr_warn("DiB0090 I2C write failed\n"); pr_warn 278 drivers/media/dvb-frontends/dib0090.c pr_warn("DiB0090 I2C read failed\n"); pr_warn 306 drivers/media/dvb-frontends/dib0090.c pr_warn("DiB0090 I2C write failed\n"); pr_warn 813 drivers/media/dvb-frontends/dib7000p.c pr_warn("DIB7000P: dib7000p_get_internal_freq returned 0\n"); pr_warn 1353 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_warn("drx3933: I2C write/read failed\n"); pr_warn 1380 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_warn("drx3933: I2C write/read failed\n"); pr_warn 5423 drivers/media/dvb-frontends/drxk_hard.c pr_warn("Unknown QAM demodulator parameter count %d\n", pr_warn 5430 drivers/media/dvb-frontends/drxk_hard.c pr_warn("Warning %d on %s\n", status, __func__); pr_warn 26 drivers/media/dvb-frontends/ec100.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 76 drivers/media/dvb-frontends/helene.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 83 drivers/media/dvb-frontends/helene.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 769 drivers/media/dvb-frontends/lgdt3306a.c pr_warn("IF=%d KHz is not supported, 3250 assumed\n", pr_warn 1202 drivers/media/dvb-frontends/lgdt3306a.c pr_warn("UNKNOWN\n"); pr_warn 1285 drivers/media/dvb-frontends/lgdt3306a.c pr_warn("UNKNOWN whatLock=%d\n", whatLock); pr_warn 1845 drivers/media/dvb-frontends/lgdt3306a.c pr_warn("expected 0x74, got 0x%x\n", (val & 0x74)); pr_warn 1855 drivers/media/dvb-frontends/lgdt3306a.c pr_warn("expected 0xc6, got 0x%x\n", (val & 0xf6)); pr_warn 1865 drivers/media/dvb-frontends/lgdt3306a.c pr_warn("expected 0x03, got 0x%x\n", (val & 0x73)); pr_warn 1880 drivers/media/dvb-frontends/lgdt3306a.c pr_warn("unable to detect LGDT3306A hardware\n"); pr_warn 152 drivers/media/dvb-frontends/m88ds3103.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 57 drivers/media/dvb-frontends/mxl5xx.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 64 drivers/media/dvb-frontends/nxt200x.c pr_warn("%s: i2c write error (addr 0x%02x, err == %i)\n", pr_warn 77 drivers/media/dvb-frontends/nxt200x.c pr_warn("%s: i2c read error (addr 0x%02x, err == %i)\n", pr_warn 92 drivers/media/dvb-frontends/nxt200x.c pr_warn("%s: i2c wr reg=%04x: len=%d is too big!\n", pr_warn 101 drivers/media/dvb-frontends/nxt200x.c pr_warn("%s: i2c write error (addr 0x%02x, err == %i)\n", pr_warn 118 drivers/media/dvb-frontends/nxt200x.c pr_warn("%s: i2c read error (addr 0x%02x, err == %i)\n", pr_warn 196 drivers/media/dvb-frontends/nxt200x.c pr_warn("Error writing multireg register 0x%02X\n", reg); pr_warn 278 drivers/media/dvb-frontends/nxt200x.c pr_warn("Timeout waiting for nxt200x to stop. This is ok after firmware upload.\n"); pr_warn 317 drivers/media/dvb-frontends/nxt200x.c pr_warn("Timeout waiting for nxt2004 to init.\n"); pr_warn 335 drivers/media/dvb-frontends/nxt200x.c pr_warn("error writing to tuner\n"); pr_warn 344 drivers/media/dvb-frontends/nxt200x.c pr_warn("timeout waiting for tuner lock\n"); pr_warn 373 drivers/media/dvb-frontends/nxt200x.c pr_warn("timeout error writing to tuner\n"); pr_warn 69 drivers/media/dvb-frontends/or51211.c pr_warn("error (addr %02x, err == %i)\n", reg, err); pr_warn 86 drivers/media/dvb-frontends/or51211.c pr_warn("error (addr %02x, err == %i)\n", reg, err); pr_warn 105 drivers/media/dvb-frontends/or51211.c pr_warn("error eprom addr\n"); pr_warn 109 drivers/media/dvb-frontends/or51211.c pr_warn("error eprom\n"); pr_warn 123 drivers/media/dvb-frontends/or51211.c pr_warn("error 1\n"); pr_warn 130 drivers/media/dvb-frontends/or51211.c pr_warn("error 2\n"); pr_warn 136 drivers/media/dvb-frontends/or51211.c pr_warn("error 3\n"); pr_warn 143 drivers/media/dvb-frontends/or51211.c pr_warn("error 4\n"); pr_warn 160 drivers/media/dvb-frontends/or51211.c pr_warn("error 1\n"); pr_warn 167 drivers/media/dvb-frontends/or51211.c pr_warn("error 2\n"); pr_warn 183 drivers/media/dvb-frontends/or51211.c pr_warn("error 3\n"); pr_warn 193 drivers/media/dvb-frontends/or51211.c pr_warn("error 5\n"); pr_warn 197 drivers/media/dvb-frontends/or51211.c pr_warn("error 6\n"); pr_warn 235 drivers/media/dvb-frontends/or51211.c pr_warn("write error\n"); pr_warn 240 drivers/media/dvb-frontends/or51211.c pr_warn("read error\n"); pr_warn 293 drivers/media/dvb-frontends/or51211.c pr_warn("error writing snr reg\n"); pr_warn 297 drivers/media/dvb-frontends/or51211.c pr_warn("read_status read error\n"); pr_warn 366 drivers/media/dvb-frontends/or51211.c pr_warn("No firmware uploaded (timeout or file not found?)\n"); pr_warn 373 drivers/media/dvb-frontends/or51211.c pr_warn("Writing firmware to device failed!\n"); pr_warn 389 drivers/media/dvb-frontends/or51211.c pr_warn("Load DVR Error 5\n"); pr_warn 402 drivers/media/dvb-frontends/or51211.c pr_warn("Load DVR Error A\n"); pr_warn 408 drivers/media/dvb-frontends/or51211.c pr_warn("Load DVR Error B\n"); pr_warn 419 drivers/media/dvb-frontends/or51211.c pr_warn("Load DVR Error C\n"); pr_warn 425 drivers/media/dvb-frontends/or51211.c pr_warn("Load DVR Error D\n"); pr_warn 437 drivers/media/dvb-frontends/or51211.c pr_warn("Load DVR Error 6 - %d\n", i); pr_warn 444 drivers/media/dvb-frontends/or51211.c pr_warn("Load DVR Error 7 - %d\n", i); pr_warn 465 drivers/media/dvb-frontends/or51211.c pr_warn("Load DVR Error 8\n"); pr_warn 471 drivers/media/dvb-frontends/or51211.c pr_warn("Load DVR Error 9\n"); pr_warn 45 drivers/media/dvb-frontends/stv0910.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 31 drivers/media/dvb-frontends/stv6111.h pr_warn("%s: Driver disabled by Kconfig\n", __func__); pr_warn 99 drivers/media/dvb-frontends/tda8261.c pr_warn("%s: Frequency beyond limits, frequency=%d\n", pr_warn 303 drivers/media/mc/mc-devnode.c pr_warn("unable to allocate major\n"); pr_warn 310 drivers/media/mc/mc-devnode.c pr_warn("bus_register failed\n"); pr_warn 3492 drivers/media/pci/bt8xx/bttv-cards.c pr_warn("%d: tuner type unset\n", btv->c.nr); pr_warn 3497 drivers/media/pci/bt8xx/bttv-cards.c pr_warn("%d: the autoload option is obsolete\n", btv->c.nr); pr_warn 3498 drivers/media/pci/bt8xx/bttv-cards.c pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n", pr_warn 3592 drivers/media/pci/bt8xx/bttv-cards.c pr_warn("%d: unknown audiodev value!\n", btv->c.nr); pr_warn 3642 drivers/media/pci/bt8xx/bttv-cards.c pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr); pr_warn 3908 drivers/media/pci/bt8xx/bttv-cards.c pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr); pr_warn 4025 drivers/media/pci/bt8xx/bttv-cards.c pr_warn("%d: osprey eeprom: Not overriding user specified card type\n", pr_warn 4304 drivers/media/pci/bt8xx/bttv-cards.c pr_warn("This is not a PCI-8604PW\n"); pr_warn 3444 drivers/media/pci/bt8xx/bttv-driver.c pr_warn("%d: irq: skipped frame [main=%lx,o_vbi=%lx,o_field=%lx,rc=%lx]\n", pr_warn 4015 drivers/media/pci/bt8xx/bttv-driver.c pr_warn("%d: Can't enable device\n", btv->c.nr); pr_warn 4019 drivers/media/pci/bt8xx/bttv-driver.c pr_warn("%d: No suitable DMA available\n", btv->c.nr); pr_warn 4025 drivers/media/pci/bt8xx/bttv-driver.c pr_warn("%d: can't request iomem (0x%llx)\n", pr_warn 4035 drivers/media/pci/bt8xx/bttv-driver.c pr_warn("%d: v4l2_device_register() failed\n", btv->c.nr); pr_warn 4316 drivers/media/pci/bt8xx/bttv-driver.c pr_warn("%d: Can't enable device\n", btv->c.nr); pr_warn 4324 drivers/media/pci/bt8xx/bttv-driver.c pr_warn("%d: Can't enable device\n", btv->c.nr); pr_warn 4391 drivers/media/pci/bt8xx/bttv-driver.c pr_warn("bus_register error: %d\n", ret); pr_warn 274 drivers/media/pci/bt8xx/bttv-i2c.c pr_warn("%d: i2c read 0x%x: error\n", pr_warn 430 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_warn("or51211: Init Error - Can't Reset DVR (%i)\n", ret); pr_warn 547 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_warn("digitv_alps_tded4: Init Error - Can't Reset DVR (%i)\n", pr_warn 382 drivers/media/pci/cobalt/cobalt-v4l2.c pr_warn("aborted\n"); pr_warn 41 drivers/media/pci/cx23885/altera-ci.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 47 drivers/media/pci/cx23885/altera-ci.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 52 drivers/media/pci/cx23885/altera-ci.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 58 drivers/media/pci/cx23885/altera-ci.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 67 drivers/media/pci/cx23885/altera-ci.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 73 drivers/media/pci/cx23885/altera-ci.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 79 drivers/media/pci/cx23885/altera-ci.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 129 drivers/media/pci/cx23885/cimax2.c pr_warn("%s: i2c wr reg=%04x: len=%d is too big!\n", pr_warn 119 drivers/media/pci/cx23885/cx23885-alsa.c pr_warn("%s: cx23885_alsa_map_sg failed\n", __func__); pr_warn 237 drivers/media/pci/cx23885/cx23885-alsa.c pr_warn("%s/1: Audio risc op code error\n", pr_warn 544 drivers/media/pci/cx23885/cx23885-alsa.c pr_warn("%s(): Missing SRAM channel configuration for analog TV Audio\n", pr_warn 1374 drivers/media/pci/cx23885/cx23885-cards.c pr_warn("%s: warning: unknown hauppauge model #%d\n", pr_warn 548 drivers/media/pci/cx23885/cx23885-core.c pr_warn("%s: %s - dma channel status dump\n", pr_warn 551 drivers/media/pci/cx23885/cx23885-core.c pr_warn("%s: cmds: %-15s: 0x%08x\n", pr_warn 557 drivers/media/pci/cx23885/cx23885-core.c pr_warn("%s: risc%d: ", dev->name, i); pr_warn 564 drivers/media/pci/cx23885/cx23885-core.c pr_warn("%s: (0x%08x) iq %x: ", dev->name, pr_warn 569 drivers/media/pci/cx23885/cx23885-core.c pr_warn("%s: iq %x: 0x%08x [ arg #%d ]\n", pr_warn 574 drivers/media/pci/cx23885/cx23885-core.c pr_warn("%s: fifo: 0x%08x -> 0x%x\n", pr_warn 576 drivers/media/pci/cx23885/cx23885-core.c pr_warn("%s: ctrl: 0x%08x -> 0x%x\n", pr_warn 578 drivers/media/pci/cx23885/cx23885-core.c pr_warn("%s: ptr1_reg: 0x%08x\n", pr_warn 580 drivers/media/pci/cx23885/cx23885-core.c pr_warn("%s: ptr2_reg: 0x%08x\n", pr_warn 582 drivers/media/pci/cx23885/cx23885-core.c pr_warn("%s: cnt1_reg: 0x%08x\n", pr_warn 584 drivers/media/pci/cx23885/cx23885-core.c pr_warn("%s: cnt2_reg: 0x%08x\n", pr_warn 1460 drivers/media/pci/cx23885/cx23885-dvb.c pr_warn("Unable to enumerate dib7000p\n"); pr_warn 326 drivers/media/pci/cx23885/cx23885-i2c.c pr_warn("%s: i2c bus %d register FAILED\n", pr_warn 1066 drivers/media/pci/cx23885/cx23885-video.c pr_warn("%s: video risc op code error\n", pr_warn 183 drivers/media/pci/cx25821/cx25821-alsa.c pr_warn("%s: cx25821_alsa_map_sg failed\n", __func__); pr_warn 327 drivers/media/pci/cx25821/cx25821-alsa.c pr_warn("WARNING %s/1: Audio risc op code error\n", dev->name); pr_warn 335 drivers/media/pci/cx25821/cx25821-alsa.c pr_warn("WARNING %s: Downstream sync error!\n", dev->name); pr_warn 580 drivers/media/pci/cx25821/cx25821-core.c pr_warn("%s: %s - dma channel status dump\n", dev->name, ch->name); pr_warn 582 drivers/media/pci/cx25821/cx25821-core.c pr_warn("cmds + 0x%2x: %-15s: 0x%08x\n", pr_warn 588 drivers/media/pci/cx25821/cx25821-core.c pr_warn("cmds + 0x%2x: risc%d: ", j + i * 4, i); pr_warn 596 drivers/media/pci/cx25821/cx25821-core.c pr_warn("ctrl + 0x%2x (0x%08x): iq %x: ", pr_warn 601 drivers/media/pci/cx25821/cx25821-core.c pr_warn("ctrl + 0x%2x : iq %x: 0x%08x [ arg #%d ]\n", pr_warn 606 drivers/media/pci/cx25821/cx25821-core.c pr_warn(" : fifo: 0x%08x -> 0x%x\n", pr_warn 608 drivers/media/pci/cx25821/cx25821-core.c pr_warn(" : ctrl: 0x%08x -> 0x%x\n", pr_warn 610 drivers/media/pci/cx25821/cx25821-core.c pr_warn(" : ptr1_reg: 0x%08x\n", pr_warn 612 drivers/media/pci/cx25821/cx25821-core.c pr_warn(" : ptr2_reg: 0x%08x\n", pr_warn 614 drivers/media/pci/cx25821/cx25821-core.c pr_warn(" : cnt1_reg: 0x%08x\n", pr_warn 616 drivers/media/pci/cx25821/cx25821-core.c pr_warn(" : cnt2_reg: 0x%08x\n", pr_warn 654 drivers/media/pci/cx25821/cx25821-core.c pr_warn("cmds + 0x%2x: risc%d: ", j + i * 4, i); pr_warn 662 drivers/media/pci/cx25821/cx25821-core.c pr_warn("ctrl + 0x%2x (0x%08x): iq %x: ", pr_warn 668 drivers/media/pci/cx25821/cx25821-core.c pr_warn("ctrl + 0x%2x : iq %x: 0x%08x [ arg #%d ]\n", pr_warn 673 drivers/media/pci/cx25821/cx25821-core.c pr_warn(" : fifo: 0x%08x -> 0x%x\n", pr_warn 675 drivers/media/pci/cx25821/cx25821-core.c pr_warn(" : ctrl: 0x%08x -> 0x%x\n", pr_warn 677 drivers/media/pci/cx25821/cx25821-core.c pr_warn(" : ptr1_reg: 0x%08x\n", pr_warn 679 drivers/media/pci/cx25821/cx25821-core.c pr_warn(" : ptr2_reg: 0x%08x\n", pr_warn 681 drivers/media/pci/cx25821/cx25821-core.c pr_warn(" : cnt1_reg: 0x%08x\n", pr_warn 683 drivers/media/pci/cx25821/cx25821-core.c pr_warn(" : cnt2_reg: 0x%08x\n", pr_warn 688 drivers/media/pci/cx25821/cx25821-core.c pr_warn("instruction %d = 0x%x\n", i, risc); pr_warn 693 drivers/media/pci/cx25821/cx25821-core.c pr_warn("\nread cdt loc=0x%x\n", risc); pr_warn 99 drivers/media/pci/cx25821/cx25821-video.c pr_warn("%s, %s: video risc op code error\n", pr_warn 367 drivers/media/pci/cx25821/cx25821.h pr_warn("(%d): " fmt, dev->board, ##args) pr_warn 222 drivers/media/pci/cx88/cx88-alsa.c pr_warn("Audio risc op code error\n"); pr_warn 322 drivers/media/pci/cx88/cx88-alsa.c pr_warn("%s: cx88_alsa_map_sg failed\n", __func__); pr_warn 2822 drivers/media/pci/cx88/cx88-cards.c pr_warn("Leadtek eeprom invalid.\n"); pr_warn 2896 drivers/media/pci/cx88/cx88-cards.c pr_warn("warning: unknown hauppauge model #%d\n", tv.model); pr_warn 3101 drivers/media/pci/cx88/cx88-cards.c pr_warn("dvico_fusionhdtv_hybrid_init buf %d failed (err = %d)!\n", pr_warn 3500 drivers/media/pci/cx88/cx88-cards.c pr_warn("Unable to enable tuner(%i).\n", pr_warn 181 drivers/media/pci/cx88/cx88-dsp.c pr_warn("unsupported audio mode %d for %s\n", pr_warn 321 drivers/media/pci/cx88/cx88-mpeg.c pr_warn("mpeg risc op code error\n"); pr_warn 372 drivers/media/pci/cx88/cx88-mpeg.c pr_warn("irq loop -- clearing mask\n"); pr_warn 762 drivers/media/pci/cx88/cx88-mpeg.c pr_warn("Trying to remove cx8802 driver while cx8802 sub-drivers still loaded?!\n"); pr_warn 1079 drivers/media/pci/cx88/cx88-video.c pr_warn("video risc op code error\n"); pr_warn 1123 drivers/media/pci/cx88/cx88-video.c pr_warn("irq loop -- clearing mask\n"); pr_warn 58 drivers/media/pci/ivtv/ivtv-alsa.h pr_warn("%s-alsa: " fmt, v4l2_dev->name , ## args) pr_warn 1167 drivers/media/pci/ivtv/ivtvfb.c pr_warn("ivtvfb needs PAT disabled for write-combined framebuffer caching.\n"); pr_warn 1168 drivers/media/pci/ivtv/ivtvfb.c pr_warn("Boot with nopat kernel parameter to use caching, or use the\n"); pr_warn 1169 drivers/media/pci/ivtv/ivtvfb.c pr_warn("force_pat module parameter to run with caching disabled\n"); pr_warn 303 drivers/media/pci/saa7134/saa7134-alsa.c pr_warn("%s: saa7134_alsa_map_sg failed\n", __func__); pr_warn 7093 drivers/media/pci/saa7134/saa7134-cards.c pr_warn("%s: there are different flyvideo cards with different tuners\n" pr_warn 7346 drivers/media/pci/saa7134/saa7134-cards.c pr_warn("%s: warning: unknown hauppauge model #%d\n", pr_warn 7449 drivers/media/pci/saa7134/saa7134-cards.c pr_warn("%s: seems there are two different versions of the MD5044\n" pr_warn 7578 drivers/media/pci/saa7134/saa7134-cards.c pr_warn("%s: %s: dual saa713x broadcast decoders\n" pr_warn 7727 drivers/media/pci/saa7134/saa7134-cards.c pr_warn("%s: board type fixup: %s\n", dev->name, pr_warn 7925 drivers/media/pci/saa7134/saa7134-cards.c pr_warn("%s: send wake up byte to pic16C505(IR chip) failed\n", pr_warn 7974 drivers/media/pci/saa7134/saa7134-cards.c pr_warn("%s: Unexpected tuner type info: %x in eeprom\n", pr_warn 7996 drivers/media/pci/saa7134/saa7134-cards.c pr_warn("%s: Unable to enable tuner(%i).\n", pr_warn 8013 drivers/media/pci/saa7134/saa7134-cards.c pr_warn("%s: Unable to enable IF of the tuner.\n", pr_warn 608 drivers/media/pci/saa7134/saa7134-core.c pr_warn("%s/irq: looping -- clearing PE (parity error!) enable bit\n", pr_warn 613 drivers/media/pci/saa7134/saa7134-core.c pr_warn("%s/irq: looping -- clearing GPIO16 enable bit\n", pr_warn 619 drivers/media/pci/saa7134/saa7134-core.c pr_warn("%s/irq: looping -- clearing GPIO18 enable bit\n", pr_warn 625 drivers/media/pci/saa7134/saa7134-core.c pr_warn("%s/irq: looping -- clearing all enable bits\n", pr_warn 766 drivers/media/pci/saa7134/saa7134-core.c pr_warn("saa7134: <rant>\n" pr_warn 775 drivers/media/pci/saa7134/saa7134-core.c pr_warn("saa7134: Board is currently unknown. You might try to use the card=<nr>\n" pr_warn 782 drivers/media/pci/saa7134/saa7134-core.c pr_warn("saa7134: card=%d -> %-40.40s", pr_warn 1099 drivers/media/pci/saa7134/saa7134-core.c pr_warn("%s: Oops: no 32bit PCI DMA ???\n", dev->name); pr_warn 237 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("could not access the I2C gate\n"); pr_warn 245 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("could not access the I2C gate\n"); pr_warn 348 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("could not write to tuner at addr: 0x%02x\n", pr_warn 535 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("could not access tda8290 I2C gate\n"); pr_warn 603 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("no tda827x tuner found at addr: %02x\n", pr_warn 1027 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: sorry can't set high LNB supply voltage from here\n", pr_warn 1402 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: Lifeview Trio, No tda826x found!\n", pr_warn 1409 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: Lifeview Trio, No ISL6421 found!\n", pr_warn 1425 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("no tda827x tuner found at addr: %02x\n", pr_warn 1430 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("failed to attach tda10046\n"); pr_warn 1453 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: Medion Quadro, no tda826x found !\n", pr_warn 1462 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: Medion Quadro, no ISL6405 found !\n", pr_warn 1522 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: No tda826x found!\n", __func__); pr_warn 1528 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: No ISL6421 found!\n", __func__); pr_warn 1596 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: No tda826x found!\n", __func__); pr_warn 1601 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: No lnbp21 found!\n", __func__); pr_warn 1633 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: MD7134 DVB-S, no SD1878 found !\n", pr_warn 1642 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: MD7134 DVB-S, no ISL6405 found !\n", pr_warn 1674 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: Asus Tiger 3in1, no tda826x found!\n", pr_warn 1680 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: Asus Tiger 3in1, no lnbp21 found!\n", pr_warn 1699 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: Asus My Cinema PS3-100, no tda826x found!\n", pr_warn 1705 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: Asus My Cinema PS3-100, no lnbp21 found!\n", pr_warn 1753 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: No zl10036 found!\n", pr_warn 1764 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: No zl10039 found!\n", pr_warn 1777 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("error attaching QT1010\n"); pr_warn 1853 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("%s: No zl10039 found!\n", pr_warn 1858 drivers/media/pci/saa7134/saa7134-dvb.c pr_warn("Huh? unknown DVB card?\n"); pr_warn 394 drivers/media/pci/saa7134/saa7134-i2c.c pr_warn("%s: i2c eeprom read error (err=%d)\n", pr_warn 661 drivers/media/pci/saa7134/saa7134-tvaudio.c pr_warn("%s: dsp access error\n", dev->name); pr_warn 1019 drivers/media/pci/saa7134/saa7134-tvaudio.c pr_warn("%s: kernel_thread() failed\n", pr_warn 1239 drivers/media/pci/sta2x11/sta2x11_vip.c pr_warn("VIP: Can't enable device.\n"); pr_warn 1250 drivers/media/pci/sta2x11/sta2x11_vip.c pr_warn("VIP: Can't enable device.\n"); pr_warn 240 drivers/media/platform/exynos4-is/media-dev.c pr_warn("%s(): No sensor subdev\n", __func__); pr_warn 265 drivers/media/platform/exynos4-is/media-dev.c pr_warn("%s(): No sensor subdev\n", __func__); pr_warn 803 drivers/media/platform/sh_vou.c pr_warn("%s(): Invalid bus-format code %d, using default 8-bit\n", pr_warn 108 drivers/media/rc/ene_ir.c pr_warn("device seems to be disabled\n"); pr_warn 109 drivers/media/rc/ene_ir.c pr_warn("send a mail to lirc-list@lists.sourceforge.net\n"); pr_warn 110 drivers/media/rc/ene_ir.c pr_warn("please attach output of acpidump and dmidecode\n"); pr_warn 120 drivers/media/rc/ene_ir.c pr_warn("chips 0x33xx aren't supported\n"); pr_warn 229 drivers/media/rc/ene_ir.c pr_warn("Error validating extra buffers, device probably won't work\n"); pr_warn 588 drivers/media/rc/ene_ir.c pr_warn("TX: transmitter cable isn't connected!\n"); pr_warn 615 drivers/media/rc/ene_ir.c pr_warn("TX: BUG: attempt to transmit NULL buffer\n"); pr_warn 1039 drivers/media/rc/ene_ir.c pr_warn("Simulation of TX activated\n"); pr_warn 47 drivers/media/tuners/fc0012.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 40 drivers/media/tuners/r820t.h pr_warn("%s: driver disabled by Kconfig\n", __func__); pr_warn 376 drivers/media/tuners/tea5767.c pr_warn("It is not a TEA5767. Received %i bytes.\n", rc); pr_warn 383 drivers/media/tuners/tea5767.c pr_warn("All bytes are equal. It is not a TEA5767\n"); pr_warn 393 drivers/media/tuners/tea5767.c pr_warn("Chip ID is not zero. It is not a TEA5767\n"); pr_warn 167 drivers/media/usb/au0828/au0828-cards.c pr_warn("%s: warning: unknown hauppauge model #%d\n", pr_warn 621 drivers/media/usb/au0828/au0828-dvb.c pr_warn("The frontend of your DVB/ATSC card isn't supported yet\n"); pr_warn 111 drivers/media/usb/dvb-usb-v2/az6007.c pr_warn("usb read operation failed. (%d)\n", ret); pr_warn 277 drivers/media/usb/dvb-usb-v2/az6007.c pr_warn("usb in operation failed. (%d)\n", ret); pr_warn 314 drivers/media/usb/dvb-usb-v2/az6007.c pr_warn("usb out operation failed. (%d)\n", ret); pr_warn 350 drivers/media/usb/dvb-usb-v2/az6007.c pr_warn("usb in operation failed. (%d)\n", ret); pr_warn 354 drivers/media/usb/dvb-usb-v2/az6007.c pr_warn("Read CI IO error\n"); pr_warn 390 drivers/media/usb/dvb-usb-v2/az6007.c pr_warn("usb out operation failed. (%d)\n", ret); pr_warn 421 drivers/media/usb/dvb-usb-v2/az6007.c pr_warn("usb in operation failed. (%d)\n", ret); pr_warn 450 drivers/media/usb/dvb-usb-v2/az6007.c pr_warn("usb out operation failed. (%d)\n", ret); pr_warn 462 drivers/media/usb/dvb-usb-v2/az6007.c pr_warn("usb out operation failed. (%d)\n", ret); pr_warn 506 drivers/media/usb/dvb-usb-v2/az6007.c pr_warn("usb out operation failed. (%d)\n", ret); pr_warn 538 drivers/media/usb/dvb-usb-v2/az6007.c pr_warn("usb in operation failed. (%d)\n", ret); pr_warn 60 drivers/media/usb/dvb-usb-v2/mxl111sf.c pr_warn("%s: len=%d is too big!\n", __func__, wlen); pr_warn 1134 drivers/media/usb/dvb-usb/cxusb.c pr_warn("Unable to enumerate dib7000p\n"); pr_warn 186 drivers/media/usb/gspca/kinect.c pr_warn("send_cmd: Data buffer is %d bytes long, but got %d bytes\n", pr_warn 213 drivers/media/usb/gspca/kinect.c pr_warn("send_cmd returned %d [%04x %04x], 0000 expected\n", pr_warn 395 drivers/media/usb/gspca/kinect.c pr_warn("[Stream %02x] Invalid magic %02x%02x\n", pr_warn 410 drivers/media/usb/gspca/kinect.c pr_warn("Packet type not recognized...\n"); pr_warn 2795 drivers/media/usb/gspca/ov519.c pr_warn("WARNING: Sensor is an OV66308. Your camera may have been misdetected in previous driver versions.\n"); pr_warn 2811 drivers/media/usb/gspca/ov519.c pr_warn("WARNING: Sensor is an OV66307. Your camera may have been misdetected in previous driver versions.\n"); pr_warn 1949 drivers/media/usb/gspca/sn9c20x.c pr_warn("sn9c20x camera with unknown number of alt settings (%d), please report!\n", pr_warn 1352 drivers/media/usb/gspca/sonixj.c pr_warn("Erroneous HV7131R ID 0x%02x 0x%02x 0x%02x\n", pr_warn 4071 drivers/media/usb/gspca/topro.c pr_warn("Unknown sensor %d - forced to soi763a\n", pr_warn 6525 drivers/media/usb/gspca/zc3xx.c pr_warn("Unknown sensor - set to TAS5130C\n"); pr_warn 1677 drivers/media/usb/s2255/s2255drv.c pr_warn("s2255: Not all channels available.\n"); pr_warn 2303 drivers/media/usb/s2255/s2255drv.c pr_warn("2257 needs firmware %d or above.\n", pr_warn 2336 drivers/media/usb/s2255/s2255drv.c pr_warn("Sensoray 2255 driver load failed: 0x%x\n", retval); pr_warn 267 drivers/media/usb/siano/smsusb.c pr_warn("failed to open '%s' mode %d, trying again with default firmware\n", pr_warn 273 drivers/media/usb/siano/smsusb.c pr_warn("failed to open '%s' mode %d\n", pr_warn 64 drivers/media/usb/stk1160/stk1160.h pr_warn("stk1160: " fmt, ## args) pr_warn 562 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c pr_warn("%s: muxpack has invalid len %d\n", __func__, len); pr_warn 243 drivers/media/v4l2-core/tuner-core.c pr_warn("Tuner frontend module has no way to set freq\n"); pr_warn 265 drivers/media/v4l2-core/tuner-core.c pr_warn("Tuner frontend module has no way to set config\n"); pr_warn 903 drivers/media/v4l2-core/tuner-core.c pr_warn("tuner type not set\n"); pr_warn 907 drivers/media/v4l2-core/tuner-core.c pr_warn("Tuner has no way to set tv freq\n"); pr_warn 972 drivers/media/v4l2-core/tuner-core.c pr_warn("pal= argument not recognised\n"); pr_warn 998 drivers/media/v4l2-core/tuner-core.c pr_warn("secam= argument not recognised\n"); pr_warn 1044 drivers/media/v4l2-core/tuner-core.c pr_warn("tuner type not set\n"); pr_warn 1048 drivers/media/v4l2-core/tuner-core.c pr_warn("tuner has no way to set radio frequency\n"); pr_warn 806 drivers/media/v4l2-core/v4l2-dev.c pr_warn("%s: media_device_register_entity failed\n", pr_warn 1008 drivers/media/v4l2-core/v4l2-dev.c pr_warn("%s: requested %s%d, got %s\n", __func__, pr_warn 1069 drivers/media/v4l2-core/v4l2-dev.c pr_warn("videodev: unable to get major %d\n", pr_warn 1077 drivers/media/v4l2-core/v4l2-dev.c pr_warn("video_dev: class_register failed\n"); pr_warn 184 drivers/media/v4l2-core/v4l2-fwnode.c pr_warn("duplicated lane %u in data-lanes, using defaults\n", pr_warn 197 drivers/media/v4l2-core/v4l2-fwnode.c pr_warn("invalid number of lane-polarities entries (need %u, got %u)\n", pr_warn 213 drivers/media/v4l2-core/v4l2-fwnode.c pr_warn("duplicated lane %u in clock-lanes, using defaults\n", pr_warn 487 drivers/media/v4l2-core/v4l2-fwnode.c pr_warn("unsupported bus type %u\n", mbus_type); pr_warn 2857 drivers/media/v4l2-core/v4l2-ioctl.c pr_warn("%s: has no ioctl_ops.\n", pr_warn 1248 drivers/memory/omap-gpmc.c pr_warn("%s called before GPMC IRQ domain available\n", pr_warn 1486 drivers/memory/omap-gpmc.c pr_warn("%s: disabling cs %d mapped at 0x%x-0x%x\n", pr_warn 1932 drivers/memory/omap-gpmc.c pr_warn("%s: page/burst-length set but not used!\n", pr_warn 2394 drivers/mfd/ab8500-debugfs.c pr_warn("HWREG request: %s, %s,\n", (write) ? "write" : "read", pr_warn 2396 drivers/mfd/ab8500-debugfs.c pr_warn(" addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n", pr_warn 481 drivers/mfd/cros_ec_dev.c pr_warn(CROS_EC_DEV_NAME ": can't register driver: %d\n", ret); pr_warn 2409 drivers/mfd/db8500-prcmu.c pr_warn("prcmu: Unknown message header (%d) in mailbox %d\n", pr_warn 1003 drivers/mfd/lpc_ich.c pr_warn("Resource conflict(s) found affecting %s\n", pr_warn 193 drivers/mfd/omap-usb-tll.c pr_warn("Invalid port mode, using default\n"); pr_warn 53 drivers/mfd/sta2x11-mfd.c pr_warn("%s: Unspecified device, using first instance\n", pr_warn 287 drivers/mfd/twl4030-irq.c pr_warn("twl4030: I2C error %d reading PIH ISR\n", ret); pr_warn 386 drivers/mfd/twl4030-irq.c pr_warn("twl4030: err %d initializing %s %s\n", pr_warn 394 drivers/mfd/twl4030-irq.c pr_warn("twl4030: write failed: %d\n", pr_warn 505 drivers/mfd/twl4030-power.c pr_warn("TWL4030: Bad order of scripts (sleep script before wakeup) Leads to boot failure on some boards\n"); pr_warn 931 drivers/mfd/twl4030-power.c pr_warn("TWL4030 Unable to read registers\n"); pr_warn 173 drivers/mfd/twl6030-irq.c pr_warn("twl6030_irq: I2C error %d reading PIH ISR\n", ret); pr_warn 212 drivers/mfd/twl6030-irq.c pr_warn("twl6030_irq: I2C error in clearing PIH ISR\n"); pr_warn 923 drivers/misc/ibmvmc.c pr_warn("ibmvmc: read: nbytes invalid 0x%x\n", pr_warn 930 drivers/misc/ibmvmc.c pr_warn("ibmvmc: read: no session\n"); pr_warn 936 drivers/misc/ibmvmc.c pr_warn("ibmvmc: read: no hmc\n"); pr_warn 942 drivers/misc/ibmvmc.c pr_warn("ibmvmc: read: no adapter\n"); pr_warn 1153 drivers/misc/ibmvmc.c pr_warn("ibmvmc: Reserve HMC: state_failed\n"); pr_warn 1158 drivers/misc/ibmvmc.c pr_warn("ibmvmc: Reserve HMC: not state_ready\n"); pr_warn 1169 drivers/misc/ibmvmc.c pr_warn("ibmvmc: buffers not ready for index %d\n", pr_warn 1178 drivers/misc/ibmvmc.c pr_warn("%s: free hmc not found\n", __func__); pr_warn 1231 drivers/misc/ibmvmc.c pr_warn("ibmvmc: sethmcid: invalid state to send open 0x%x\n", pr_warn 1246 drivers/misc/ibmvmc.c pr_warn("ibmvmc: sethmcid: no buffer available\n"); pr_warn 1341 drivers/misc/ibmvmc.c pr_warn("ibmvmc: requestvmc: copy to user failed.\n"); pr_warn 1368 drivers/misc/ibmvmc.c pr_warn("ibmvmc: ioctl: no session\n"); pr_warn 1383 drivers/misc/ibmvmc.c pr_warn("ibmvmc: unknown ioctl 0x%x\n", cmd); pr_warn 2318 drivers/misc/ibmvmc.c pr_warn("ibmvmc: Max MTU reduced to %d\n", MAX_MTU); pr_warn 2321 drivers/misc/ibmvmc.c pr_warn("ibmvmc: Max MTU increased to %d\n", MIN_MTU); pr_warn 2326 drivers/misc/ibmvmc.c pr_warn("ibmvmc: Max buffer pool size reduced to %d\n", pr_warn 2330 drivers/misc/ibmvmc.c pr_warn("ibmvmc: Max buffer pool size increased to %d\n", pr_warn 2336 drivers/misc/ibmvmc.c pr_warn("ibmvmc: Max HMCs reduced to %d\n", MAX_HMCS); pr_warn 2339 drivers/misc/ibmvmc.c pr_warn("ibmvmc: Max HMCs increased to %d\n", MIN_HMCS); pr_warn 160 drivers/misc/lkdtm/perms.c pr_warn("Failed to allocate user memory\n"); pr_warn 181 drivers/misc/lkdtm/perms.c pr_warn("Failed to allocate user memory\n"); pr_warn 186 drivers/misc/lkdtm/perms.c pr_warn("copy_to_user failed\n"); pr_warn 24 drivers/misc/lkdtm/refcount.c pr_warn("Overflow detected: unsafely reset to max\n"); pr_warn 75 drivers/misc/lkdtm/refcount.c pr_warn("Weird: refcount_inc_not_zero() reported zero\n"); pr_warn 87 drivers/misc/lkdtm/refcount.c pr_warn("Weird: refcount_add_not_zero() reported zero\n"); pr_warn 99 drivers/misc/lkdtm/refcount.c pr_warn("Zero detected: unsafely reset to max\n"); pr_warn 102 drivers/misc/lkdtm/refcount.c pr_warn("Still at zero: refcount_inc/add() must not inc-from-0\n"); pr_warn 135 drivers/misc/lkdtm/refcount.c pr_warn("Still at %d: refcount_inc/add() must not inc-from-0\n", pr_warn 145 drivers/misc/lkdtm/refcount.c pr_warn("Negative detected: unsafely reset to max\n"); pr_warn 173 drivers/misc/lkdtm/refcount.c pr_warn("Weird: refcount_dec_and_test() reported zero\n"); pr_warn 188 drivers/misc/lkdtm/refcount.c pr_warn("Weird: refcount_sub_and_test() reported zero\n"); pr_warn 203 drivers/misc/lkdtm/refcount.c pr_warn("Zero detected: unsafely reset to max\n"); pr_warn 268 drivers/misc/lkdtm/refcount.c pr_warn("Saturation detected: unsafely reset to max\n"); pr_warn 318 drivers/misc/lkdtm/refcount.c pr_warn("Weird: refcount_inc_not_zero() reported zero\n"); pr_warn 330 drivers/misc/lkdtm/refcount.c pr_warn("Weird: refcount_add_not_zero() reported zero\n"); pr_warn 342 drivers/misc/lkdtm/refcount.c pr_warn("Weird: refcount_dec_and_test() reported zero\n"); pr_warn 354 drivers/misc/lkdtm/refcount.c pr_warn("Weird: refcount_sub_and_test() reported zero\n"); pr_warn 73 drivers/misc/lkdtm/usercopy.c pr_warn("Failed to allocate user memory\n"); pr_warn 81 drivers/misc/lkdtm/usercopy.c pr_warn("copy_to_user failed unexpectedly?!\n"); pr_warn 88 drivers/misc/lkdtm/usercopy.c pr_warn("copy_to_user failed, but lacked Oops\n"); pr_warn 102 drivers/misc/lkdtm/usercopy.c pr_warn("copy_from_user failed unexpectedly?!\n"); pr_warn 109 drivers/misc/lkdtm/usercopy.c pr_warn("copy_from_user failed, but lacked Oops\n"); pr_warn 133 drivers/misc/lkdtm/usercopy.c pr_warn("Failed to allocate kernel memory\n"); pr_warn 141 drivers/misc/lkdtm/usercopy.c pr_warn("Failed to allocate user memory\n"); pr_warn 154 drivers/misc/lkdtm/usercopy.c pr_warn("copy_to_user failed unexpectedly?!\n"); pr_warn 160 drivers/misc/lkdtm/usercopy.c pr_warn("copy_to_user failed, but lacked Oops\n"); pr_warn 166 drivers/misc/lkdtm/usercopy.c pr_warn("copy_from_user failed unexpectedly?!\n"); pr_warn 172 drivers/misc/lkdtm/usercopy.c pr_warn("copy_from_user failed, but lacked Oops\n"); pr_warn 197 drivers/misc/lkdtm/usercopy.c pr_warn("Failed to allocate kernel cache\n"); pr_warn 206 drivers/misc/lkdtm/usercopy.c pr_warn("Failed to allocate buffer from whitelist cache\n"); pr_warn 215 drivers/misc/lkdtm/usercopy.c pr_warn("Failed to allocate user memory\n"); pr_warn 229 drivers/misc/lkdtm/usercopy.c pr_warn("copy_to_user failed unexpectedly?!\n"); pr_warn 235 drivers/misc/lkdtm/usercopy.c pr_warn("copy_to_user failed, but lacked Oops\n"); pr_warn 241 drivers/misc/lkdtm/usercopy.c pr_warn("copy_from_user failed unexpectedly?!\n"); pr_warn 247 drivers/misc/lkdtm/usercopy.c pr_warn("copy_from_user failed, but lacked Oops\n"); pr_warn 303 drivers/misc/lkdtm/usercopy.c pr_warn("Failed to allocate user memory\n"); pr_warn 310 drivers/misc/lkdtm/usercopy.c pr_warn("copy_to_user failed unexpectedly?!\n"); pr_warn 317 drivers/misc/lkdtm/usercopy.c pr_warn("copy_to_user failed, but lacked Oops\n"); pr_warn 234 drivers/misc/ocxl/link.c pr_warn("Unresolved OpenCAPI xsl fault in kernel context\n"); pr_warn 262 drivers/misc/ti-st/st_kim.c pr_warn("skipping the wait event of change remote baud"); pr_warn 318 drivers/misc/ti-st/st_kim.c pr_warn("change remote baud" pr_warn 109 drivers/misc/vmw_vmci/vmci_context.c pr_warn("Failed to allocate memory for VMCI context\n"); pr_warn 319 drivers/misc/vmw_vmci/vmci_context.c pr_warn("Failed to allocate memory for datagram\n"); pr_warn 831 drivers/misc/vmw_vmci/vmci_context.c pr_warn("Attempt to restore checkpoint with obsolete wellknown handles\n"); pr_warn 1069 drivers/misc/vmw_vmci/vmci_context.c pr_warn("Failed to get privilege flags for destination (handle=0x%x:0x%x)\n", pr_warn 76 drivers/misc/vmw_vmci/vmci_datagram.c pr_warn("Failed allocating memory for datagram entry\n"); pr_warn 91 drivers/misc/vmw_vmci/vmci_datagram.c pr_warn("Failed to add new resource (handle=0x%x:0x%x), error: %d\n", pr_warn 180 drivers/misc/vmw_vmci/vmci_datagram.c pr_warn("Couldn't get privileges (handle=0x%x:0x%x)\n", pr_warn 345 drivers/misc/vmw_vmci/vmci_datagram.c pr_warn("Unknown route (%d) for datagram\n", route); pr_warn 424 drivers/misc/vmw_vmci/vmci_doorbell.c pr_warn("Failed allocating memory for datagram entry\n"); pr_warn 432 drivers/misc/vmw_vmci/vmci_doorbell.c pr_warn("Failed to get context ID\n"); pr_warn 478 drivers/misc/vmw_vmci/vmci_doorbell.c pr_warn("Failed to add new resource (handle=0x%x:0x%x), error: %d\n", pr_warn 601 drivers/misc/vmw_vmci/vmci_doorbell.c pr_warn("Unknown route (%d) for doorbell\n", route); pr_warn 63 drivers/misc/vmw_vmci/vmci_driver.c pr_warn("Failed to initialize guest personality (err=%d)\n", pr_warn 76 drivers/misc/vmw_vmci/vmci_driver.c pr_warn("Unable to initialize host personality (err=%d)\n", pr_warn 57 drivers/misc/vmw_vmci/vmci_event.c pr_warn("Unexpected free events occurring\n"); pr_warn 982 drivers/misc/vmw_vmci/vmci_host.c pr_warn("Failed to initialize VMCIContext (error%d)\n", pr_warn 989 drivers/misc/vmw_vmci/vmci_host.c pr_warn("Module registration error (name=%s, major=%d, minor=%d, err=%d)\n", pr_warn 993 drivers/misc/vmw_vmci/vmci_host.c pr_warn("Unable to initialize host personality\n"); pr_warn 762 drivers/misc/vmw_vmci/vmci_queue_pair.c pr_warn("vmap failed\n"); pr_warn 909 drivers/misc/vmw_vmci/vmci_queue_pair.c pr_warn("Failed to add new resource (handle=0x%x:0x%x), error: %d", pr_warn 1148 drivers/misc/vmw_vmci/vmci_queue_pair.c pr_warn("Error allocating pages for produce queue\n"); pr_warn 1155 drivers/misc/vmw_vmci/vmci_queue_pair.c pr_warn("Error allocating pages for consume queue\n"); pr_warn 1164 drivers/misc/vmw_vmci/vmci_queue_pair.c pr_warn("Error allocating memory in %s\n", __func__); pr_warn 1173 drivers/misc/vmw_vmci/vmci_queue_pair.c pr_warn("qp_alloc_ppn_set failed\n"); pr_warn 1208 drivers/misc/vmw_vmci/vmci_queue_pair.c pr_warn("qp_alloc_hypercall result = %d\n", result); pr_warn 1410 drivers/misc/vmw_vmci/vmci_queue_pair.c pr_warn("Failed to add new resource (handle=0x%x:0x%x), error: %d", pr_warn 1475 drivers/misc/vmw_vmci/vmci_queue_pair.c pr_warn("Failed to enqueue queue_pair %s event datagram for context (ID=0x%x)\n", pr_warn 1658 drivers/misc/vmw_vmci/vmci_queue_pair.c pr_warn("Failed to notify peer (ID=0x%x) of attach to queue pair (handle=0x%x:0x%x)\n", pr_warn 1975 drivers/misc/vmw_vmci/vmci_queue_pair.c pr_warn("Context (ID=0x%x) not attached to queue pair (handle=0x%x:0x%x)\n", pr_warn 2029 drivers/misc/vmw_vmci/vmci_queue_pair.c pr_warn("Failed to notify peer (ID=0x%x) of attach to queue pair (handle=0x%x:0x%x)\n", pr_warn 2136 drivers/misc/vmw_vmci/vmci_queue_pair.c pr_warn("Failed to unmap queue headers for queue pair (handle=0x%x:0x%x,result=%d)\n", pr_warn 2347 drivers/misc/vmw_vmci/vmci_queue_pair.c pr_warn("Failed to save queue headers for queue pair (handle=0x%x:0x%x,result=%d)\n", pr_warn 416 drivers/mmc/core/block.c pr_warn("%s: %s - SANITIZE is not supported\n", pr_warn 140 drivers/mmc/core/bus.c pr_warn("%s: error %d during shutdown\n", pr_warn 171 drivers/mmc/core/bus.c pr_warn("%s: error %d during resume (card was removed?)\n", pr_warn 414 drivers/mmc/core/core.c pr_warn("%s: %s: Interrupted sanitize\n", pr_warn 562 drivers/mmc/core/core.c pr_warn("%s: running CQE recovery\n", mmc_hostname(host)); pr_warn 1215 drivers/mmc/core/core.c pr_warn("%s: cannot verify signal voltage switch\n", pr_warn 2135 drivers/mmc/core/core.c pr_warn("%s: tried to HW reset card, got error %d\n", pr_warn 2159 drivers/mmc/core/core.c pr_warn("%s: tried to SW reset card, got error %d\n", pr_warn 294 drivers/mmc/core/mmc.c pr_warn("%s: defines enhanced area without partition setting complete\n", pr_warn 336 drivers/mmc/core/mmc.c pr_warn("%s: has partition size defined without partition complete\n", pr_warn 681 drivers/mmc/core/mmc.c pr_warn("%s: unable to read EXT_CSD, performance might suffer\n", pr_warn 906 drivers/mmc/core/mmc.c pr_warn("%s: Voltage range not supported for power class\n", pr_warn 954 drivers/mmc/core/mmc.c pr_warn("%s: power class selection to bus width %d ddr %d failed\n", pr_warn 1041 drivers/mmc/core/mmc.c pr_warn("%s: switch to bus width %d failed\n", pr_warn 1061 drivers/mmc/core/mmc.c pr_warn("%s: switch to high-speed failed, err:%d\n", pr_warn 1793 drivers/mmc/core/mmc.c pr_warn("%s: Enabling HPI failed\n", pr_warn 1822 drivers/mmc/core/mmc.c pr_warn("%s: Cache is supported, but failed to turn on (%d)\n", pr_warn 1841 drivers/mmc/core/mmc.c pr_warn("%s: Enabling CMDQ failed\n", pr_warn 423 drivers/mmc/core/mmc_ops.c pr_warn("%s: unexpected status %#x after switch\n", pr_warn 820 drivers/mmc/core/mmc_ops.c pr_warn("%s: error %d interrupting operation. " pr_warn 948 drivers/mmc/core/mmc_ops.c pr_warn("%s: Error %d starting bkops\n", pr_warn 244 drivers/mmc/core/sd.c pr_warn("%s: card lacks mandatory SD Status function\n", pr_warn 254 drivers/mmc/core/sd.c pr_warn("%s: problem reading SD Status register\n", pr_warn 281 drivers/mmc/core/sd.c pr_warn("%s: SD Status: Invalid Allocation Unit size\n", pr_warn 309 drivers/mmc/core/sd.c pr_warn("%s: card lacks mandatory switch function, performance might suffer\n", pr_warn 332 drivers/mmc/core/sd.c pr_warn("%s: problem reading Bus Speed modes\n", pr_warn 384 drivers/mmc/core/sd.c pr_warn("%s: Problem switching card into high-speed mode!\n", pr_warn 415 drivers/mmc/core/sd.c pr_warn("%s: Problem setting drive strength!\n", pr_warn 496 drivers/mmc/core/sd.c pr_warn("%s: Problem setting bus speed mode!\n", pr_warn 587 drivers/mmc/core/sd.c pr_warn("%s: Problem setting current limit!\n", pr_warn 656 drivers/mmc/core/sd.c pr_warn("%s: ddr50 tuning failed\n", pr_warn 748 drivers/mmc/core/sd.c pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host)); pr_warn 901 drivers/mmc/core/sd.c pr_warn("%s: host does not support reading read-only switch, assuming write-enable\n", pr_warn 217 drivers/mmc/core/sdio.c pr_warn("%s: SDIO_CCCR_IF is invalid: 0x%02x\n", pr_warn 578 drivers/mmc/core/sdio.c pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host)); pr_warn 193 drivers/mmc/core/sdio_bus.c pr_warn("WARNING: driver %s did not remove its interrupt handler!\n", pr_warn 177 drivers/mmc/core/sdio_cis.c pr_warn("%s: card has broken SDIO 1.1 CIS, forcing SDIO 1.0\n", pr_warn 93 drivers/mmc/core/sdio_irq.c pr_warn("%s: pending IRQ for non-existent function\n", pr_warn 100 drivers/mmc/core/sdio_irq.c pr_warn("%s: pending IRQ with no handler\n", pr_warn 1047 drivers/mmc/core/sdio_uart.c pr_warn("%s: need info on UART class basic setup\n", pr_warn 1066 drivers/mmc/core/sdio_uart.c pr_warn("%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n", pr_warn 973 drivers/mmc/host/s3cmci.c pr_warn("%s: can't do non-word sized block transfers (blksz %d)\n", pr_warn 1667 drivers/mmc/host/sdhci-msm.c pr_warn("%s: 1.8/3V not supported for vqmmc\n", pr_warn 167 drivers/mmc/host/sdhci-of-arasan.c pr_warn("%s: Regmap write fail: %d\n", pr_warn 565 drivers/mmc/host/sdhci-of-arasan.c pr_warn("%s: Have regmap, but no soc-ctl-syscon\n", pr_warn 604 drivers/mmc/host/sdhci-of-arasan.c pr_warn("%s: Have regmap, but no soc-ctl-syscon\n", pr_warn 651 drivers/mmc/host/sdhci-of-esdhc.c pr_warn("%s: using unsupported clock division.\n", pr_warn 277 drivers/mmc/host/sdhci-pci-gli.c pr_warn("%s: enable PCI MSI failed, error=%d\n", pr_warn 209 drivers/mmc/host/sdhci-pci-o2micro.c pr_warn("%s: HW tuning failed !\n", pr_warn 276 drivers/mmc/host/sdhci-pci-o2micro.c pr_warn("%s: DLL unlocked when dll_adjust_count is %d.\n", pr_warn 612 drivers/mmc/host/sdhci-tegra.c pr_warn("%s: Missing autocal timeout 3v3-pad drvs\n", pr_warn 623 drivers/mmc/host/sdhci-tegra.c pr_warn("%s: Missing autocal timeout 3v3-pad drvs\n", pr_warn 634 drivers/mmc/host/sdhci-tegra.c pr_warn("%s: Missing autocal timeout 1v8-pad drvs\n", pr_warn 645 drivers/mmc/host/sdhci-tegra.c pr_warn("%s: Missing autocal timeout 1v8-pad drvs\n", pr_warn 1533 drivers/mmc/host/sdhci.c pr_warn("%s: Invalid UHS-I mode selected\n", pr_warn 1983 drivers/mmc/host/sdhci.c pr_warn("%s: invalid driver type, default to driver type B\n", pr_warn 2193 drivers/mmc/host/sdhci.c pr_warn("%s: Switching to 3.3V signalling voltage failed\n", pr_warn 2206 drivers/mmc/host/sdhci.c pr_warn("%s: 3.3V regulator output did not became stable\n", pr_warn 2216 drivers/mmc/host/sdhci.c pr_warn("%s: Switching to 1.8V signalling voltage failed\n", pr_warn 2238 drivers/mmc/host/sdhci.c pr_warn("%s: 1.8V regulator output did not became stable\n", pr_warn 2248 drivers/mmc/host/sdhci.c pr_warn("%s: Switching to 1.2V signalling voltage failed\n", pr_warn 3576 drivers/mmc/host/sdhci.c pr_warn("%s: Failed to set 64-bit DMA mask.\n", pr_warn 3586 drivers/mmc/host/sdhci.c pr_warn("%s: Failed to set 32-bit DMA mask.\n", pr_warn 3801 drivers/mmc/host/sdhci.c pr_warn("%s: No suitable DMA available - falling back to PIO\n", pr_warn 3836 drivers/mmc/host/sdhci.c pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n", pr_warn 3841 drivers/mmc/host/sdhci.c pr_warn("%s: unable to allocate aligned ADMA descriptor\n", pr_warn 4010 drivers/mmc/host/sdhci.c pr_warn("%s: Failed to enable vqmmc regulator: %d\n", pr_warn 4228 drivers/mmc/host/sdhci.c pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n", pr_warn 950 drivers/mmc/host/tifm_sd.c pr_warn("%s : card gone, unexpectedly\n", pr_warn 792 drivers/mmc/host/wbsd.c pr_warn("%s: Data command %d is not supported by this controller\n", pr_warn 1417 drivers/mmc/host/wbsd.c pr_warn(DRIVER_NAME ": Unable to allocate DMA %d - falling back on FIFO\n", pr_warn 1655 drivers/mmc/host/wbsd.c pr_warn(DRIVER_NAME ": Unable to confirm device presence - you may experience lock-ups\n"); pr_warn 1677 drivers/mmc/host/wbsd.c pr_warn(DRIVER_NAME ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n"); pr_warn 1870 drivers/mmc/host/wbsd.c pr_warn(DRIVER_NAME ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n"); pr_warn 393 drivers/mtd/chips/cfi_cmdset_0002.c pr_warn("%s: Bad 38VF640x CFI data; adjusting sector size from 64 to 8KiB\n", pr_warn 404 drivers/mtd/chips/cfi_cmdset_0002.c pr_warn("%s: Bad S29GL064N CFI data; adjust from 64 to 128 sectors\n", pr_warn 416 drivers/mtd/chips/cfi_cmdset_0002.c pr_warn("%s: Bad S29GL032N CFI data; adjust from 127 to 63 sectors\n", pr_warn 431 drivers/mtd/chips/cfi_cmdset_0002.c pr_warn("%s: Bad S29NS512P CFI data; adjust to 512 sectors\n", pr_warn 186 drivers/mtd/chips/cfi_probe.c pr_warn("Bad S70GL02GS CFI data; adjust to detect 2 chips\n"); pr_warn 355 drivers/mtd/devices/bcm47xxsflash.c pr_warn("Serial flash busy\n"); pr_warn 72 drivers/mtd/nand/core.c pr_warn("failed to write BBM to block @%llx (err = %d)\n", pr_warn 129 drivers/mtd/nand/core.c pr_warn("attempt to erase a bad/reserved block @%llx\n", pr_warn 138 drivers/mtd/nand/raw/cmx270_nand.c pr_warn("CM-X270: failed to request NAND CS gpio\n"); pr_warn 146 drivers/mtd/nand/raw/cmx270_nand.c pr_warn("CM-X270: failed to request NAND R/B gpio\n"); pr_warn 200 drivers/mtd/nand/raw/cs553x_nand.c pr_warn("ioremap cs553x NAND @0x%08lx failed\n", adr); pr_warn 998 drivers/mtd/nand/raw/diskonchip.c pr_warn("ECC error scanning DOC at 0x%x\n", offs); pr_warn 1013 drivers/mtd/nand/raw/diskonchip.c pr_warn("DiskOnChip %s Media Header not found.\n", id); pr_warn 1079 drivers/mtd/nand/raw/diskonchip.c pr_warn("UnitSizeFactor=0x00 detected. Correct value is assumed to be 0x%02x.\n", mh->UnitSizeFactor); pr_warn 1501 drivers/mtd/nand/raw/diskonchip.c pr_warn("Possible DiskOnChip at 0x%lx failed TOGGLE test, dropping.\n", physadr); pr_warn 882 drivers/mtd/nand/raw/nand_base.c pr_warn("timing mode %d not acknowledged by the NAND chip\n", pr_warn 4210 drivers/mtd/nand/raw/nand_base.c pr_warn("%s: attempt to erase a bad block at page 0x%08x\n", pr_warn 4789 drivers/mtd/nand/raw/nand_base.c pr_warn("bus width %d instead of %d bits\n", busw ? 16 : 8, pr_warn 5035 drivers/mtd/nand/raw/nand_base.c pr_warn("No NAND device found\n"); pr_warn 5648 drivers/mtd/nand/raw/nand_base.c pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n", pr_warn 5675 drivers/mtd/nand/raw/nand_base.c pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n"); pr_warn 5741 drivers/mtd/nand/raw/nand_base.c pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n", pr_warn 477 drivers/mtd/nand/raw/nand_bbt.c pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n", pr_warn 498 drivers/mtd/nand/raw/nand_bbt.c pr_warn("Bad eraseblock %d at 0x%012llx\n", pr_warn 579 drivers/mtd/nand/raw/nand_bbt.c pr_warn("Bad block table not found for chip %d\n", i); pr_warn 696 drivers/mtd/nand/raw/nand_bbt.c pr_warn("nand_bbt: error %d while marking block %d bad\n", pr_warn 799 drivers/mtd/nand/raw/nand_bbt.c pr_warn("nand_bbt: ECC error while reading block for writing bad block table\n"); pr_warn 861 drivers/mtd/nand/raw/nand_bbt.c pr_warn("nand_bbt: error while erasing BBT block %d\n", pr_warn 871 drivers/mtd/nand/raw/nand_bbt.c pr_warn("nand_bbt: error while writing BBT block %d\n", pr_warn 886 drivers/mtd/nand/raw/nand_bbt.c pr_warn("nand_bbt: error while writing bad block table %d\n", res); pr_warn 1343 drivers/mtd/nand/raw/nand_bbt.c pr_warn("Bad block pattern already allocated; not replacing\n"); pr_warn 122 drivers/mtd/nand/raw/nand_bch.c pr_warn("ecc parameters not supplied\n"); pr_warn 139 drivers/mtd/nand/raw/nand_bch.c pr_warn("invalid eccbytes %u, should be %u\n", pr_warn 148 drivers/mtd/nand/raw/nand_bch.c pr_warn("missing oob scheme"); pr_warn 154 drivers/mtd/nand/raw/nand_bch.c pr_warn("eccsize %u is too large\n", eccsize); pr_warn 169 drivers/mtd/nand/raw/nand_bch.c pr_warn("invalid ecc layout\n"); pr_warn 403 drivers/mtd/nand/raw/nand_hynix.c pr_warn("failed to initialize read-retry infrastructure"); pr_warn 116 drivers/mtd/nand/raw/nand_jedec.c pr_warn("Invalid codeword size\n"); pr_warn 186 drivers/mtd/nand/raw/nand_onfi.c pr_warn("Could not find a valid ONFI parameter page, trying bit-wise majority to recover it\n"); pr_warn 271 drivers/mtd/nand/raw/nand_onfi.c pr_warn("Failed to detect ONFI extended param page\n"); pr_warn 273 drivers/mtd/nand/raw/nand_onfi.c pr_warn("Could not retrieve ONFI ECC requirements\n"); pr_warn 177 drivers/mtd/nand/raw/nandsim.c do { pr_warn(" warning: " args); } while(0) pr_warn 128 drivers/mtd/parsers/bcm47xxpart.c pr_warn("Reached maximum number of partitions, scanning stopped!\n"); pr_warn 189 drivers/mtd/parsers/bcm47xxpart.c pr_warn("No enough space to store another TRX found at 0x%X\n", pr_warn 255 drivers/mtd/parsers/bcm47xxpart.c pr_warn("Reached maximum number of partitions, scanning stopped!\n"); pr_warn 74 drivers/mtd/parsers/bcm63xxpart.c pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n", pr_warn 334 drivers/mtd/parsers/cmdlinepart.c pr_warn("%s: partitioning exceeds flash size, truncating\n", pr_warn 341 drivers/mtd/parsers/cmdlinepart.c pr_warn("%s: skipping zero sized partition\n", pr_warn 172 drivers/mtd/parsers/ofpart.c pr_warn("Device tree uses obsolete partition map binding: %pOF\n", dp); pr_warn 54 drivers/mtd/parsers/parser_imagetag.c pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n", pr_warn 351 drivers/mtd/parsers/sharpslpart.c pr_warn("sharpslpart: first partition table is invalid, retry using the second\n"); pr_warn 114 drivers/mtd/ubi/block.c pr_warn("UBI: block: empty 'block=' parameter - ignored\n"); pr_warn 353 drivers/mtd/ubi/block.c pr_warn("UBI: block: volume size is not a multiple of 512, " pr_warn 1375 drivers/mtd/ubi/build.c pr_warn("UBI warning: empty 'mtd=' parameter - ignored\n"); pr_warn 171 drivers/mtd/ubi/misc.c pr_warn(UBI_NAME_STR "%d warning: %ps: %pV\n", pr_warn 92 drivers/net/bonding/bond_debugfs.c pr_warn("Warning: Cannot create bonding directory in debugfs\n"); pr_warn 4483 drivers/net/bonding/bond_main.c pr_warn("ad_select param only affects 802.3ad mode\n"); pr_warn 4489 drivers/net/bonding/bond_main.c pr_warn("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n", pr_warn 4495 drivers/net/bonding/bond_main.c pr_warn("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to 0\n", pr_warn 4501 drivers/net/bonding/bond_main.c pr_warn("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n", pr_warn 4507 drivers/net/bonding/bond_main.c pr_warn("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n", pr_warn 4513 drivers/net/bonding/bond_main.c pr_warn("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n", pr_warn 4519 drivers/net/bonding/bond_main.c pr_warn("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n", pr_warn 4527 drivers/net/bonding/bond_main.c pr_warn("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n"); pr_warn 4528 drivers/net/bonding/bond_main.c pr_warn("Forcing miimon to 100msec\n"); pr_warn 4534 drivers/net/bonding/bond_main.c pr_warn("Warning: tx_queues (%d) should be between 1 and 255, resetting to %d\n", pr_warn 4540 drivers/net/bonding/bond_main.c pr_warn("Warning: all_slaves_active module parameter (%d), not of valid value (0/1), so it was set to 0\n", pr_warn 4546 drivers/net/bonding/bond_main.c pr_warn("Warning: resend_igmp (%d) should be between 0 and 255, resetting to %d\n", pr_warn 4553 drivers/net/bonding/bond_main.c pr_warn("Warning: packets_per_slave (%d) should be between 0 and %u resetting to 1\n", pr_warn 4568 drivers/net/bonding/bond_main.c pr_warn("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n", pr_warn 4574 drivers/net/bonding/bond_main.c pr_warn("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n", pr_warn 4580 drivers/net/bonding/bond_main.c pr_warn("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n", pr_warn 4587 drivers/net/bonding/bond_main.c pr_warn("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n", pr_warn 4596 drivers/net/bonding/bond_main.c pr_warn("Warning: arp_interval module parameter (%d), not in range 0-%d, so it was reset to 0\n", pr_warn 4608 drivers/net/bonding/bond_main.c pr_warn("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n", pr_warn 4615 drivers/net/bonding/bond_main.c pr_warn("Warning: duplicate address %pI4 in arp_ip_target, skipping\n", pr_warn 4622 drivers/net/bonding/bond_main.c pr_warn("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n", pr_warn 4683 drivers/net/bonding/bond_main.c pr_warn("Warning: %s primary device specified but has no effect in %s mode\n", pr_warn 4713 drivers/net/bonding/bond_main.c pr_warn("Warning: fail_over_mac only affects active-backup mode\n"); pr_warn 4745 drivers/net/bonding/bond_main.c pr_warn("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n", pr_warn 298 drivers/net/bonding/bond_procfs.c pr_warn("Warning: Cannot create /proc/net/%s\n", pr_warn 1423 drivers/net/caif/caif_hsi.c pr_warn("%s: caif_hsi device registration failed\n", __func__); pr_warn 657 drivers/net/dsa/qca8k.c pr_warn("regmap initialization failed"); pr_warn 697 drivers/net/ethernet/3com/3c509.c pr_warn("%s: transmit timed out, Tx_status %2.2x status %4.4x Tx FIFO room %d\n", pr_warn 518 drivers/net/ethernet/3com/3c515.c pr_warn("pnp activate failed (out of resources?)\n"); pr_warn 663 drivers/net/ethernet/3com/3c515.c pr_warn(" *** Warning: this IRQ is unlikely to work! ***\n"); pr_warn 970 drivers/net/ethernet/3com/3c515.c pr_warn("%s: transmit timed out, tx_status %2.2x status %4.4x\n", pr_warn 975 drivers/net/ethernet/3com/3c515.c pr_warn("%s: Transmitter encountered 16 collisions -- network cable problem?\n", pr_warn 1385 drivers/net/ethernet/3com/3c515.c pr_warn("%s: Warning -- the skbuff addresses do not match in boomerang_rx: %p vs. %p / %p\n", pr_warn 1304 drivers/net/ethernet/3com/3c59x.c pr_warn(" *** Warning: IRQ %d is unlikely to work! ***\n", pr_warn 1419 drivers/net/ethernet/3com/3c59x.c pr_warn(" ***WARNING*** No MII transceivers found!\n"); pr_warn 1559 drivers/net/ethernet/3com/3c59x.c pr_warn("%s: Could not enable device\n", dev->name); pr_warn 1987 drivers/net/ethernet/3com/3c59x.c pr_warn("%s: Updating statistics failed, disabling stats as an interrupt source\n", pr_warn 2137 drivers/net/ethernet/3com/3c59x.c pr_warn("%s: BUG! Tx Ring full, refusing to send buffer\n", pr_warn 2335 drivers/net/ethernet/3com/3c59x.c pr_warn("%s: Too much work in interrupt, status %4.4x\n", pr_warn 2471 drivers/net/ethernet/3com/3c59x.c pr_warn("%s: Too much work in interrupt, status %4.4x\n", pr_warn 2745 drivers/net/ethernet/3com/3c59x.c pr_warn("%s supports hardware checksums, and we're not using them!\n", pr_warn 1534 drivers/net/ethernet/amazon/ena/ena_com.c pr_warn("Trying to set unsupported aenq events. supported flag: 0x%x asked flag: 0x%x\n", pr_warn 2440 drivers/net/ethernet/amazon/ena/ena_netdev.c pr_warn("Cannot set host attributes\n"); pr_warn 412 drivers/net/ethernet/amd/ariadne.c pr_warn("Couldn't find AMD Ethernet Chip\n"); pr_warn 416 drivers/net/ethernet/amd/ariadne.c pr_warn("Couldn't find Am79C960 (Wrong part number = %ld)\n", pr_warn 430 drivers/net/ethernet/broadcom/b44.c pr_warn("PHY: cannot reset MII transceiver isolate bit\n"); pr_warn 2276 drivers/net/ethernet/broadcom/bcm63xx_enet.c pr_warn("invalid forced speed on port %s: assume 10\n", pr_warn 554 drivers/net/ethernet/broadcom/cnic.c pr_warn("%s: Failed waiting for ref count to go to zero\n", pr_warn 3389 drivers/net/ethernet/broadcom/genet/bcmgenet.c pr_warn("GENET is reporting EPHY revision: 0x%04x\n", pr_warn 3394 drivers/net/ethernet/broadcom/genet/bcmgenet.c pr_warn("Invalid GPHY revision detected: 0x%04x\n", gphy_rev); pr_warn 3406 drivers/net/ethernet/broadcom/genet/bcmgenet.c pr_warn("GENET does not support 40-bits PA\n"); pr_warn 1437 drivers/net/ethernet/cavium/thunder/thunder_bgx.c pr_warn("Invalid link device\n"); pr_warn 1140 drivers/net/ethernet/chelsio/cxgb/cxgb2.c pr_warn("%s: cannot register net device %s, skipping\n", pr_warn 1433 drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c pr_warn("Could not initialize offload capabilities\n"); pr_warn 3479 drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c pr_warn("bad module parameter msi=%d; must be %d (MSI-X or MSI) or %d (MSI)\n", pr_warn 232 drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c pr_warn("ippm: idx too big %u > %u.\n", idx, ppm->ppmax); pr_warn 238 drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c pr_warn("ippm: idx %u, npods 0.\n", idx); pr_warn 259 drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c pr_warn("%s: pages %u -> npods %u, full.\n", pr_warn 977 drivers/net/ethernet/cirrus/cs89x0.c pr_warn("%s: 10Base-T (RJ-45) has no cable\n", pr_warn 986 drivers/net/ethernet/cirrus/cs89x0.c pr_warn("%s: 10Base-5 (AUI) has no cable\n", dev->name); pr_warn 994 drivers/net/ethernet/cirrus/cs89x0.c pr_warn("%s: 10Base-2 (BNC) has no cable\n", dev->name); pr_warn 1439 drivers/net/ethernet/cirrus/cs89x0.c pr_warn("No EEPROM, relying on command line....\n"); pr_warn 1441 drivers/net/ethernet/cirrus/cs89x0.c pr_warn("EEPROM read failed, relying on command line\n"); pr_warn 1447 drivers/net/ethernet/cirrus/cs89x0.c pr_warn("Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n"); pr_warn 1682 drivers/net/ethernet/cirrus/cs89x0.c pr_warn("no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n"); pr_warn 1724 drivers/net/ethernet/dec/tulip/de2104x.c pr_warn("timeout reading 21040 MAC address byte %u\n", pr_warn 393 drivers/net/ethernet/dec/tulip/dmfe.c pr_warn("32-bit PCI DMA not available\n"); pr_warn 222 drivers/net/ethernet/dec/tulip/eeprom.c pr_warn("%s: no phy info, aborting mtable build\n", pr_warn 1977 drivers/net/ethernet/dec/tulip/tulip_core.c pr_warn("tulip: unknown CPU architecture, using default csr0\n"); pr_warn 295 drivers/net/ethernet/dec/tulip/uli526x.c pr_warn("32-bit PCI DMA not available\n"); pr_warn 532 drivers/net/ethernet/dec/tulip/uli526x.c pr_warn("Can not find the phy address!!!\n"); pr_warn 378 drivers/net/ethernet/dec/tulip/winbond-840.c pr_warn("Device %s disabled due to DMA limitations\n", pr_warn 6271 drivers/net/ethernet/emulex/benet/be_main.c pr_warn(DRV_NAME "workqueue creation failed\n"); pr_warn 6278 drivers/net/ethernet/emulex/benet/be_main.c pr_warn(DRV_NAME "Could not create error recovery workqueue\n"); pr_warn 2464 drivers/net/ethernet/freescale/fman/fman.c pr_warn("Invalid fsl_fm_max_frm value (%d) in bootargs, valid range is %d-%d. Falling back to the default (%d)\n", pr_warn 2490 drivers/net/ethernet/freescale/fman/fman.c pr_warn("Invalid fsl_fm_rx_extra_headroom value (%d) in bootargs, valid range is %d-%d. Falling back to the default (%d)\n", pr_warn 980 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_warn("pause-time: %d illegal.Should be > 320\n", pr_warn 608 drivers/net/ethernet/freescale/fman/fman_memac.c pr_warn("Uninitialize event handler\n"); pr_warn 396 drivers/net/ethernet/freescale/ucc_geth.c pr_warn("%s: Invalid paddr_num: %u\n", __func__, paddr_num); pr_warn 1376 drivers/net/ethernet/freescale/ucc_geth.c pr_warn("TBI mode requires that the device tree specify a tbi-handle\n"); pr_warn 1380 drivers/net/ethernet/freescale/ucc_geth.c pr_warn("Could not get TBI device\n"); pr_warn 1632 drivers/net/ethernet/freescale/ucc_geth.c pr_warn( pr_warn 3207 drivers/net/ethernet/freescale/ucc_geth.c pr_warn("No Rx Data Buffer\n"); pr_warn 569 drivers/net/ethernet/lantiq_etop.c pr_warn("etop: invalid MAC, using random\n"); pr_warn 1111 drivers/net/ethernet/marvell/skge.c pr_warn("%s: phy read timed out\n", hw->dev[port]->name); pr_warn 1907 drivers/net/ethernet/marvell/skge.c pr_warn("%s: phy write timeout\n", hw->dev[port]->name); pr_warn 1935 drivers/net/ethernet/marvell/skge.c pr_warn("%s: phy read timeout\n", hw->dev[port]->name); pr_warn 2788 drivers/net/ethernet/marvell/sky2.c pr_warn("unknown status opcode 0x%x\n", opcode); pr_warn 366 drivers/net/ethernet/mellanox/mlx4/en_main.c pr_warn("mlx4_en: WARNING: illegal module parameter pfctx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n", pr_warn 372 drivers/net/ethernet/mellanox/mlx4/en_main.c pr_warn("mlx4_en: WARNING: illegal module parameter pfcrx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n", pr_warn 378 drivers/net/ethernet/mellanox/mlx4/en_main.c pr_warn("mlx4_en: WARNING: illegal module parameter inline_thold %d - should be in range %d-%d, will be changed to default (%d)\n", pr_warn 4140 drivers/net/ethernet/mellanox/mlx4/main.c pr_warn("Removing PF when there are active VF's !!\n"); pr_warn 4141 drivers/net/ethernet/mellanox/mlx4/main.c pr_warn("Will not disable SR-IOV.\n"); pr_warn 4429 drivers/net/ethernet/mellanox/mlx4/main.c pr_warn("mlx4_core: bad msi_x: %d\n", msi_x); pr_warn 4434 drivers/net/ethernet/mellanox/mlx4/main.c pr_warn("mlx4_core: bad num_mac: %d\n", log_num_mac); pr_warn 4439 drivers/net/ethernet/mellanox/mlx4/main.c pr_warn("mlx4_core: log_num_vlan - obsolete module param, using %d\n", pr_warn 4443 drivers/net/ethernet/mellanox/mlx4/main.c pr_warn("mlx4_core: use_prio - obsolete module param, ignored\n"); pr_warn 4446 drivers/net/ethernet/mellanox/mlx4/main.c pr_warn("mlx4_core: bad log_mtts_per_seg: %d\n", pr_warn 4453 drivers/net/ethernet/mellanox/mlx4/main.c pr_warn("Module parameter configuration ETH/IB is not supported. Switching to default configuration IB/IB\n"); pr_warn 4461 drivers/net/ethernet/mellanox/mlx4/main.c pr_warn("mlx4_core: mlx4_log_num_mgm_entry_size (%d) not in legal range (-7..0 or %d..%d)\n", pr_warn 843 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h pr_warn(DRV_NAME " %s: " format, \ pr_warn 4417 drivers/net/ethernet/mellanox/mlx4/resource_tracker.c pr_warn("Can't attach FS rule without L2 headers, adding L2 header\n"); pr_warn 177 drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c pr_warn("mlx5: Cannot generate tunnel header for this tunnel\n"); pr_warn 146 drivers/net/ethernet/mellanox/mlx5/core/en_rep.c pr_warn("vport %d error %d reading stats\n", rep->vport, err); pr_warn 1875 drivers/net/ethernet/mellanox/mlx5/core/en_rep.c pr_warn("Failed to create representor netdev for vport %d\n", pr_warn 1893 drivers/net/ethernet/mellanox/mlx5/core/en_rep.c pr_warn("Failed to attach representor netdev for vport %d\n", pr_warn 1900 drivers/net/ethernet/mellanox/mlx5/core/en_rep.c pr_warn("Failed to initialized neighbours handling for vport %d\n", pr_warn 1914 drivers/net/ethernet/mellanox/mlx5/core/en_rep.c pr_warn("Failed to register representor netdev for vport %d\n", pr_warn 372 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c pr_warn("mlx5_core: match_value differs from match_criteria\n"); pr_warn 387 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c pr_warn("mlx5: flow steering node is not in tree or garbaged\n"); pr_warn 1631 drivers/net/ethernet/mellanox/mlx5/core/main.c pr_warn("mlx5_core: WARNING: Invalid module parameter prof_sel %d, valid range 0-%zu, changing back to default(%d)\n", pr_warn 2814 drivers/net/ethernet/microchip/lan743x_main.c pr_warn("Initialization failed\n"); pr_warn 50 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_warn("instruction limit reached (%u NFP instructions)\n", pr_warn 215 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_rtsym.c pr_warn("rtsym '%s': unknown type: %d\n", sym->name, sym->type); pr_warn 693 drivers/net/ethernet/packetengines/yellowfin.c pr_warn(" Rx ring %p: ", yp->rx_ring); pr_warn 697 drivers/net/ethernet/packetengines/yellowfin.c pr_warn(" Tx ring %p: ", yp->tx_ring); pr_warn 1455 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c pr_warn("%s: chip revisions between 0x%x-0x%x will not be enabled\n", pr_warn 276 drivers/net/ethernet/sgi/ioc3-eth.c pr_warn("NIC search failed (not fatal).\n"); pr_warn 2426 drivers/net/ethernet/smsc/smsc911x.c pr_warn("Could not allocate resource\n"); pr_warn 2437 drivers/net/ethernet/smsc/smsc911x.c pr_warn("Could not allocate irq resource\n"); pr_warn 211 drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c pr_warn("%s: unexpected status %08x\n", __func__, intr_status); pr_warn 4952 drivers/net/ethernet/sun/cassini.c pr_warn("Could not enable MWI for %s\n", pci_name(pdev)); pr_warn 8693 drivers/net/ethernet/sun/niu.c pr_warn("niu%d: Driver bug, wasted channels, RX[%d] TX[%d]\n", pr_warn 2625 drivers/net/ethernet/via/via-rhine.c pr_warn("Broken BIOS detected, avoid_D3 enabled\n"); pr_warn 305 drivers/net/fddi/defza.c pr_warn("%s: command buffer full, command: %u!\n", fp->name, pr_warn 1021 drivers/net/fddi/defza.c pr_warn("%s: halted, reason: %x\n", fp->name, pr_warn 1032 drivers/net/fddi/defza.c pr_warn("%s: undefined state: %x\n", fp->name, state); pr_warn 250 drivers/net/ieee802154/fakelb.c pr_warn("fakelb driver is marked as deprecated, please use mac802154_hwsim!\n"); pr_warn 605 drivers/net/ieee802154/mrf24j40.c pr_warn("mrf24j40: ed not implemented\n"); pr_warn 1024 drivers/net/phy/dp83640.c pr_warn("phy list non-empty while unloading\n"); pr_warn 204 drivers/net/phy/mdio-bcm-unimac.c pr_warn("Incorrect MDIO clock frequency, ignoring\n"); pr_warn 100 drivers/net/phy/swphy.c pr_warn("swphy: unknown speed\n"); pr_warn 379 drivers/net/wan/c101.c pr_warn("unable to register hdlc device\n"); pr_warn 353 drivers/net/wan/cosa.c pr_warn("unable to get major %d\n", cosa_major); pr_warn 359 drivers/net/wan/cosa.c pr_warn("unable to register chardev\n"); pr_warn 369 drivers/net/wan/cosa.c pr_warn("no devices found\n"); pr_warn 567 drivers/net/wan/cosa.c pr_warn("%s: alloc_hdlcdev failed\n", chan->name); pr_warn 635 drivers/net/wan/cosa.c pr_warn("%s: cosa_net_open called with usage count %d\n", pr_warn 735 drivers/net/wan/cosa.c pr_warn("%s: rx_done with empty skb!\n", chan->name); pr_warn 754 drivers/net/wan/cosa.c pr_warn("%s: tx_done with empty skb!\n", chan->name); pr_warn 1671 drivers/net/wan/cosa.c pr_warn("%s: No channel wants data in TX IRQ. Expect DMA timeout.\n", pr_warn 1836 drivers/net/wan/cosa.c pr_warn("%s: rx for unknown channel (0x%04x)\n", pr_warn 1655 drivers/net/wan/farsync.c pr_warn("Port count mismatch on card %d. Firmware thinks %d we say %d\n", pr_warn 197 drivers/net/wan/hostess_sv11.c pr_warn("I/O 0x%X already in use\n", iobase); pr_warn 225 drivers/net/wan/hostess_sv11.c pr_warn("IRQ %d already in use\n", irq); pr_warn 473 drivers/net/wan/n2.c pr_warn("unable to register hdlc device\n"); pr_warn 428 drivers/net/wan/pc300too.c pr_warn("could not allocate IRQ%d\n", pdev->irq); pr_warn 371 drivers/net/wan/pci200syn.c pr_warn("could not allocate IRQ%d\n", pdev->irq); pr_warn 324 drivers/net/wan/sbni.c pr_warn( pr_warn 1347 drivers/net/wan/sdla.c pr_warn("io-port 0x%04lx in use\n", dev->base_addr); pr_warn 214 drivers/net/wan/sealevel.c pr_warn("I/O 0x%X already in use\n", iobase); pr_warn 265 drivers/net/wan/sealevel.c pr_warn("IRQ %d already in use\n", irq); pr_warn 652 drivers/net/wan/wanxl.c pr_warn("%s: timeout waiting for PUTS to complete\n", pr_warn 664 drivers/net/wan/wanxl.c pr_warn("%s: PUTS test 0x%X failed\n", pr_warn 683 drivers/net/wan/wanxl.c pr_warn("%s: no enough on-board RAM (%u bytes detected, %u bytes required)\n", pr_warn 692 drivers/net/wan/wanxl.c pr_warn("%s: unable to Set Byte Swap Mode\n", pci_name(pdev)); pr_warn 728 drivers/net/wan/wanxl.c pr_warn("%s: unable to Abort and Jump\n", pci_name(pdev)); pr_warn 741 drivers/net/wan/wanxl.c pr_warn("%s: timeout while initializing card firmware\n", pr_warn 756 drivers/net/wan/wanxl.c pr_warn("%s: could not allocate IRQ%i\n", pr_warn 100 drivers/net/wan/x25_asy.c pr_warn("%s(): register_netdev() failure\n", __func__); pr_warn 367 drivers/net/wan/z85230.c pr_warn("%s: overrun\n", c->dev->name); pr_warn 539 drivers/net/wan/z85230.c pr_warn("Hey who turned the DMA off?\n"); pr_warn 81 drivers/net/wireless/ath/ath5k/ath5k.h pr_warn("%s: " fmt, __func__, ##__VA_ARGS__) pr_warn 4358 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c pr_warn("brcmf_watchdog thread failed to start\n"); pr_warn 531 drivers/net/wireless/intersil/orinoco/orinoco_usb.c pr_warn("interrupt called with dead ctx\n"); pr_warn 668 drivers/net/wireless/intersil/orinoco/orinoco_usb.c pr_warn("Matched IN URB, unexpected context state(0x%x)\n", pr_warn 1406 drivers/net/wireless/intersil/orinoco/orinoco_usb.c pr_warn("%s: urb timed out, not resubmitting\n", __func__); pr_warn 1410 drivers/net/wireless/intersil/orinoco/orinoco_usb.c pr_warn("%s: connection abort, resubmitting urb\n", pr_warn 1619 drivers/net/wireless/intersil/orinoco/orinoco_usb.c pr_warn("Found a second bulk in ep, ignored\n"); pr_warn 1627 drivers/net/wireless/intersil/orinoco/orinoco_usb.c pr_warn("bulk in: wMaxPacketSize!= 64\n"); pr_warn 1629 drivers/net/wireless/intersil/orinoco/orinoco_usb.c pr_warn("bulk in: bEndpointAddress: %d\n", pr_warn 1645 drivers/net/wireless/intersil/orinoco/orinoco_usb.c pr_warn("Found a second bulk out ep, ignored\n"); pr_warn 1650 drivers/net/wireless/intersil/orinoco/orinoco_usb.c pr_warn("bulk out: wMaxPacketSize != 64\n"); pr_warn 1652 drivers/net/wireless/intersil/orinoco/orinoco_usb.c pr_warn("bulk out: bEndpointAddress: %d\n", pr_warn 433 drivers/net/wireless/marvell/mwifiex/usb.c pr_warn("unknown id_product %#x\n", id_product); pr_warn 567 drivers/net/wireless/marvell/mwifiex/wmm.c pr_warn("Have pending ack frames!\n"); pr_warn 402 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_warn("VIF%u.%u: unsupported frame type: %X\n", pr_warn 409 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_warn("VIF%u.%u: failed to %sregister mgmt frame type 0x%x\n", pr_warn 679 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_warn("unexpected bssid: %pM", auth->bssid); pr_warn 848 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_warn("%s: failed to switch to channel (%u)\n", pr_warn 26 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("VIF%u.%u CMD%x: bad cmd_id in response: 0x%.4X\n", pr_warn 32 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("VIF%u.%u CMD%x: bad MAC in response: %u\n", pr_warn 38 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("VIF%u.%u CMD%x: bad VIF in response: %u\n", pr_warn 44 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("VIF%u.%u CMD%x: bad response size %u < %zu\n", pr_warn 101 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("VIF%u.%u: drop cmd 0x%.4X in fw state %d\n", pr_warn 136 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("VIF%u.%u: cmd 0x%.4X failed: %d\n", pr_warn 394 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("VIF%u.%u: frame is too big: %zu\n", vif->mac->macid, pr_warn 432 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("VIF%u.%u: %u frame is too big: %zu\n", vif->mac->macid, pr_warn 835 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("VIF%u.%u: unsupported iftype %d\n", vif->mac->macid, pr_warn 891 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("malformed TLV 0x%.2X; LEN: %u\n", pr_warn 979 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("MAC%u: unsupported WoWLAN version 0x%x\n", pr_warn 1047 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("MAC%u: malformed TLV 0x%.2X; LEN: %u\n", pr_warn 1081 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("MAC%u: no combinations advertised\n", pr_warn 1087 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("MAC%u: combinations count exceeded\n", pr_warn 1097 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("MAC%u: record %zu size mismatch\n", pr_warn 1144 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("MAC%u: skip empty WoWLAN data\n", pr_warn 1151 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("MAC%u: WoWLAN data size mismatch\n", pr_warn 1162 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("unexpected number of rules: %u\n", pr_warn 1168 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("malformed TLV 0x%.2X; LEN: %u\n", pr_warn 1178 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("MAC%u: unknown TLV type %u\n", pr_warn 1188 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("MAC%u: malformed TLV buf; bytes left: %zu\n", pr_warn 1206 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("unexpected number of rules: expected %u got %u\n", pr_warn 1346 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("malformed TLV 0x%.2X; LEN: %zu\n", pr_warn 1449 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("unknown TLV type: %#x\n", tlv_type); pr_warn 1499 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("MAC%u: malformed TLV 0x%.2X; LEN: %u\n", pr_warn 1536 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("MAC%u: malformed TLV buf; bytes left: %zu\n", pr_warn 1560 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("malformed TLV 0x%.2X; LEN: %u\n", pr_warn 1585 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("Unknown TLV type: %#x\n", pr_warn 1593 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_warn("malformed TLV buf; bytes left: %zu\n", payload_len); pr_warn 163 drivers/net/wireless/quantenna/qtnfmac/core.c pr_warn("VIF%u.%u: Tx timeout- %lu\n", mac->macid, vif->vifid, jiffies); pr_warn 373 drivers/net/wireless/quantenna/qtnfmac/core.c pr_warn("MAC%d: scan timed out\n", mac->macid); pr_warn 425 drivers/net/wireless/quantenna/qtnfmac/core.c pr_warn("VIF%u.%u: per cpu stats allocation failed\n", pr_warn 183 drivers/net/wireless/quantenna/qtnfmac/event.c pr_warn("MAC%u.%u: bad channel freq=%u cf1=%u cf2=%u bw=%u\n", pr_warn 197 drivers/net/wireless/quantenna/qtnfmac/event.c pr_warn("VIF%u.%u: add missing BSS:%pM chan:%u\n", pr_warn 202 drivers/net/wireless/quantenna/qtnfmac/event.c pr_warn("VIF%u.%u: SSID unknown for BSS:%pM\n", pr_warn 211 drivers/net/wireless/quantenna/qtnfmac/event.c pr_warn("VIF%u.%u: IE alloc failed for BSS:%pM\n", pr_warn 229 drivers/net/wireless/quantenna/qtnfmac/event.c pr_warn("VIF%u.%u: can't connect to unknown BSS: %pM\n", pr_warn 246 drivers/net/wireless/quantenna/qtnfmac/event.c pr_warn("invalid %u TLV\n", tlv_type); pr_warn 256 drivers/net/wireless/quantenna/qtnfmac/event.c pr_warn("invalid IE_SET TLV\n"); pr_warn 273 drivers/net/wireless/quantenna/qtnfmac/event.c pr_warn("unexpected IE type: %u\n", pr_warn 284 drivers/net/wireless/quantenna/qtnfmac/event.c pr_warn("VIF%u.%u: unexpected remaining payload: %zu\n", pr_warn 576 drivers/net/wireless/quantenna/qtnfmac/event.c pr_warn("%s: unhandled radar event %u\n", pr_warn 616 drivers/net/wireless/quantenna/qtnfmac/event.c pr_warn("failed to offload external auth request\n"); pr_warn 684 drivers/net/wireless/quantenna/qtnfmac/event.c pr_warn("unknown event type: %x\n", event_id); pr_warn 201 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_warn("failed to enable MSI interrupts"); pr_warn 206 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_warn("legacy PCIE interrupts enabled\n"); pr_warn 242 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_warn("zero length packet received\n"); pr_warn 414 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_warn("bad tx_bd_size value %u\n", tx_bd_size); pr_warn 700 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_warn("skip invalid rxbd[%d]\n", r_idx); pr_warn 705 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_warn("skip missing rx_skb[%d]\n", r_idx); pr_warn 964 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_warn("FW upload retry: block #%d\n", blk); pr_warn 347 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_warn("TX BD queue cannot exceed %d\n", pr_warn 634 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_warn("skip invalid rxbd[%d]\n", r_idx); pr_warn 639 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_warn("skip missing rx_skb[%d]\n", r_idx); pr_warn 121 drivers/net/wireless/quantenna/qtnfmac/trans.c pr_warn("event dropped due to queue overflow\n"); pr_warn 174 drivers/net/wireless/quantenna/qtnfmac/trans.c pr_warn("packet is too small: %u\n", skb->len); pr_warn 180 drivers/net/wireless/quantenna/qtnfmac/trans.c pr_warn("cmd reply length mismatch: %u != %u\n", pr_warn 189 drivers/net/wireless/quantenna/qtnfmac/trans.c pr_warn("cmd reply too short: %u\n", skb->len); pr_warn 198 drivers/net/wireless/quantenna/qtnfmac/trans.c pr_warn("event too short: %u\n", skb->len); pr_warn 206 drivers/net/wireless/quantenna/qtnfmac/trans.c pr_warn("unknown packet type: %x\n", le16_to_cpu(header->type)); pr_warn 810 drivers/net/wireless/st/cw1200/sta.c pr_warn("Unhandled key type %d\n", key->cipher); pr_warn 833 drivers/net/wireless/st/cw1200/sta.c pr_warn("Unhandled key command %d\n", cmd); pr_warn 1024 drivers/net/wireless/st/cw1200/sta.c pr_warn("Unhandled BT INACTIVE from LMAC\n"); pr_warn 1027 drivers/net/wireless/st/cw1200/sta.c pr_warn("Unhandled BT ACTIVE from LMAC\n"); pr_warn 1072 drivers/net/wireless/st/cw1200/sta.c pr_warn("Malformed sdd structure\n"); pr_warn 1079 drivers/net/wireless/st/cw1200/sta.c pr_warn("SDD_PTA_CFG_ELT_ID malformed\n"); pr_warn 1096 drivers/net/wireless/st/cw1200/sta.c pr_warn("SDD file doesn't match configured refclk (%d vs %d)\n", pr_warn 1220 drivers/net/wireless/st/cw1200/sta.c pr_warn("[STA] - Join request already pending, skipping..\n"); pr_warn 1126 drivers/net/wireless/st/cw1200/txrx.c pr_warn("Unknown encryption type %d\n", pr_warn 1024 drivers/net/wireless/st/cw1200/wsm.c pr_warn("Implement find_complete_indication\n"); pr_warn 1445 drivers/net/wireless/st/cw1200/wsm.c pr_warn("Unrecognised WSM ID %04x\n", id); pr_warn 54 drivers/net/wireless/ti/wlcore/debug.h pr_warn(DRIVER_PREFIX "WARNING " fmt "\n", ##arg) pr_warn 465 drivers/net/xen-netback/interface.c pr_warn("Could not allocate netdev for %s\n", name); pr_warn 609 drivers/net/xen-netback/interface.c pr_warn("Could not setup irq handler for %s\n", dev->name); pr_warn 691 drivers/net/xen-netback/interface.c pr_warn("Could not allocate kthread for %s\n", queue->name); pr_warn 701 drivers/net/xen-netback/interface.c pr_warn("Could not allocate kthread for %s\n", queue->name); pr_warn 133 drivers/net/xen-netback/xenbus.c pr_warn("Unknown command to io_ring_q%d. Available: kick\n", pr_warn 653 drivers/net/xen-netback/xenbus.c pr_warn("Failed to parse network rate limit. Traffic unlimited.\n"); pr_warn 866 drivers/net/xen-netfront.c pr_warn("GSO size must not be zero\n"); pr_warn 873 drivers/net/xen-netfront.c pr_warn("Bad GSO type %d\n", gso->u.gso.type); pr_warn 1969 drivers/net/xen-netfront.c pr_warn("%s: register_netdev err=%d\n", __func__, err); pr_warn 764 drivers/nubus/nubus.c pr_warn("Slot %X: Dodgy doffset!\n", slot); pr_warn 767 drivers/nubus/nubus.c pr_warn("Slot %X: Wrong test pattern %08lx!\n", slot, dpat); pr_warn 800 drivers/nubus/nubus.c pr_warn("Slot %X: Board resource ID is invalid!\n", slot); pr_warn 740 drivers/nvme/host/fabrics.c pr_warn("keep_alive_tmo 0 won't execute keep alives!!!\n"); pr_warn 751 drivers/nvme/host/fabrics.c pr_warn("ctrl_loss_tmo < 0 will reconnect forever\n"); pr_warn 865 drivers/nvme/host/fabrics.c pr_warn("Clamping type of service to 255\n"); pr_warn 871 drivers/nvme/host/fabrics.c pr_warn("unknown parameter or missing value '%s' in ctrl creation request\n", pr_warn 911 drivers/nvme/host/fabrics.c pr_warn("missing parameter '%s'\n", pr_warn 961 drivers/nvme/host/fabrics.c pr_warn("invalid parameter '%s'\n", pr_warn 31 drivers/nvme/host/fault_inject.c pr_warn("%s: failed to create debugfs directory\n", dev_name); pr_warn 38 drivers/nvme/host/fault_inject.c pr_warn("%s: failed to create debugfs attr\n", dev_name); pr_warn 3296 drivers/nvme/host/fc.c pr_warn("%s: bad traddr string\n", __func__); pr_warn 3345 drivers/nvme/host/fc.c pr_warn("%s: %s - %s combination not found\n", pr_warn 578 drivers/nvme/host/pci.c pr_warn("sg[%d] phys_addr:%pad offset:%d length:%d " pr_warn 1097 drivers/nvme/target/core.c pr_warn("connect request for invalid subsystem %s!\n", pr_warn 1107 drivers/nvme/target/core.c pr_warn("hostnqn mismatch.\n"); pr_warn 1118 drivers/nvme/target/core.c pr_warn("could not find controller %d for subsys %s / host %s\n", pr_warn 1217 drivers/nvme/target/core.c pr_warn("connect request for invalid subsystem %s!\n", pr_warn 112 drivers/nvme/target/fabrics-cmd.c pr_warn("queue already connected!\n"); pr_warn 117 drivers/nvme/target/fabrics-cmd.c pr_warn("queue size zero!\n"); pr_warn 169 drivers/nvme/target/fabrics-cmd.c pr_warn("invalid connect version (%d).\n", pr_warn 177 drivers/nvme/target/fabrics-cmd.c pr_warn("connect attempt for invalid controller ID %#x\n", pr_warn 233 drivers/nvme/target/fabrics-cmd.c pr_warn("invalid connect version (%d).\n", pr_warn 246 drivers/nvme/target/fabrics-cmd.c pr_warn("invalid queue id (%d)\n", qid); pr_warn 2491 drivers/nvme/target/fc.c pr_warn("%s: bad traddr string\n", __func__); pr_warn 2582 drivers/nvme/target/fc.c pr_warn("%s: targetport list not empty\n", __func__); pr_warn 109 drivers/nvme/target/fcloop.c pr_warn("unknown parameter or missing value '%s'\n", p); pr_warn 158 drivers/nvme/target/fcloop.c pr_warn("unknown parameter or missing value '%s'\n", p); pr_warn 1378 drivers/nvme/target/fcloop.c pr_warn("%s: Failed deleting target port\n", __func__); pr_warn 1382 drivers/nvme/target/fcloop.c pr_warn("%s: Failed deleting remote port\n", __func__); pr_warn 1399 drivers/nvme/target/fcloop.c pr_warn("%s: Failed deleting local port\n", __func__); pr_warn 938 drivers/nvme/target/rdma.c pr_warn("inline_data_size %d cannot be supported by device %s. Reducing to %lu.\n", pr_warn 1317 drivers/nvme/target/rdma.c pr_warn("trying to establish a connected queue\n"); pr_warn 1525 drivers/nvme/target/rdma.c pr_warn("inline_data_size %u is too large, reducing to %u\n", pr_warn 1410 drivers/nvme/target/tcp.c pr_warn("queue %d unhandled state %d\n", pr_warn 1543 drivers/nvme/target/tcp.c pr_warn("failed to accept err=%d\n", ret); pr_warn 2123 drivers/of/base.c pr_warn("%s: ID %d >= than bitmap field %d\n", pr_warn 128 drivers/of/fdt.c pr_warn("Cannot locate property at 0x%x\n", cur); pr_warn 133 drivers/of/fdt.c pr_warn("Cannot find property name at 0x%x\n", cur); pr_warn 936 drivers/of/fdt.c pr_warn("earlycon: stdout-path %.*s not found\n", l, p); pr_warn 1036 drivers/of/fdt.c pr_warn("failed to mark hotplug range 0x%llx - 0x%llx\n", pr_warn 1111 drivers/of/fdt.c pr_warn("Ignoring memory block 0x%llx - 0x%llx\n", pr_warn 1196 drivers/of/fdt.c pr_warn("No chosen node found, continuing without\n"); pr_warn 1253 drivers/of/fdt.c pr_warn("No valid device tree found, continuing without\n"); pr_warn 1287 drivers/of/fdt.c pr_warn("not creating '/sys/firmware/fdt': CRC check failed\n"); pr_warn 57 drivers/of/kobj.c pr_warn("Duplicate name in %s, renamed to \"%s\"\n", pr_warn 179 drivers/of/of_mdio.c pr_warn(FW_WARN pr_warn 36 drivers/of/of_numa.c pr_warn("Node id %u exceeds maximum value\n", nid); pr_warn 60 drivers/of/of_numa.c pr_warn("Node id %u exceeds maximum value\n", nid); pr_warn 160 drivers/of/of_numa.c pr_warn("Invalid \"numa-node-id\" property in node %pOFn\n", pr_warn 1206 drivers/of/unittest.c pr_warn("%s: No testcase data to attach; not running tests\n", pr_warn 1218 drivers/of/unittest.c pr_warn("%s: No tree to attach; not running tests\n", __func__); pr_warn 1474 drivers/of/unittest.c pr_warn("%s: no overlay to destroy for #%d\n", pr_warn 1480 drivers/of/unittest.c pr_warn("%s: overlay destroy failed for #%d\n", pr_warn 1275 drivers/opp/core.c pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n", pr_warn 456 drivers/parisc/dino.c pr_warn("%s: HP HSC-PCI Cards with card-mode Dino not yet supported.\n", pr_warn 179 drivers/pci/controller/pci-ftpci100.c pr_warn("truncated PCI memory base\n"); pr_warn 1766 drivers/pci/controller/pci-hyperv.c pr_warn("pci_create slot %s failed\n", name); pr_warn 228 drivers/pci/controller/pci-rcar-gen2.c pr_warn("unknown window size %ld - defaulting to 256M\n", pr_warn 312 drivers/pci/hotplug/acpiphp_glue.c pr_warn("Slot %llu already registered by another hotplug driver\n", sun); pr_warn 314 drivers/pci/hotplug/acpiphp_glue.c pr_warn("acpiphp_register_hotplug_slot failed (err code = 0x%x)\n", retval); pr_warn 162 drivers/pci/hotplug/pnv_php.c pr_warn("Invalid refcount %d on <%pOF>\n", pr_warn 226 drivers/pci/of.c pr_warn("linux,pci-probe-only without valid value, ignoring\n"); pr_warn 191 drivers/pci/pci-acpi.c pr_warn("%s: Type 0 Revision %d record not supported\n", pr_warn 240 drivers/pci/pci-acpi.c pr_warn("%s: Type 1 Revision %d record not supported\n", pr_warn 402 drivers/pci/pci-acpi.c pr_warn("%s: Type 2 Revision %d record not supported\n", pr_warn 69 drivers/pci/pci-stub.c pr_warn("pci-stub: invalid ID string \"%s\"\n", id); pr_warn 79 drivers/pci/pci-stub.c pr_warn("pci-stub: failed to add dynamic ID (%d)\n", pr_warn 2196 drivers/pci/probe.c pr_warn("pci %04x:%02x:%02x.%d: not ready after %dms; giving up\n", pr_warn 35 drivers/pcmcia/pxa2xx_balloon3.c pr_warn("The FPGA code, version 0x%04x, is too old. " pr_warn 660 drivers/perf/arm_dsu_pmu.c pr_warn("Failed to set irq affinity to %d\n", cpu); pr_warn 575 drivers/perf/arm_pmu.c pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n", pr_warn 116 drivers/perf/arm_pmu_acpi.c pr_warn("ACPI: SPE must be homogeneous\n"); pr_warn 124 drivers/perf/arm_pmu_acpi.c pr_warn("ACPI: SPE Unable to register interrupt: %d\n", gsi); pr_warn 131 drivers/perf/arm_pmu_acpi.c pr_warn("ACPI: SPE: Unable to register device\n"); pr_warn 149 drivers/perf/arm_pmu_acpi.c pr_warn("Unable to parse ACPI PMU IRQ for CPU%d: %d\n", pr_warn 153 drivers/perf/arm_pmu_acpi.c pr_warn("No ACPI PMU IRQ for CPU%d\n", cpu); pr_warn 204 drivers/perf/arm_pmu_acpi.c pr_warn("Unable to allocate PMU for CPU%d\n", pr_warn 236 drivers/perf/arm_pmu_acpi.c pr_warn("mismatched PPIs detected\n"); pr_warn 317 drivers/perf/arm_pmu_acpi.c pr_warn("Unable to initialise PMU for CPU%d\n", cpu); pr_warn 324 drivers/perf/arm_pmu_acpi.c pr_warn("Unable to allocate PMU name for CPU%d\n", cpu); pr_warn 330 drivers/perf/arm_pmu_acpi.c pr_warn("Failed to register PMU for CPU%d\n", cpu); pr_warn 80 drivers/perf/arm_pmu_platform.c pr_warn("failed to parse interrupt-affinity[%d] for %pOFn\n", pr_warn 87 drivers/perf/arm_pmu_platform.c pr_warn("failed to find logical CPU for %pOFn\n", dn); pr_warn 113 drivers/perf/arm_pmu_platform.c pr_warn("no irqs for PMU, sampling events not supported\n"); pr_warn 126 drivers/perf/arm_pmu_platform.c pr_warn("no interrupt-affinity property for %pOF, guessing.\n", pr_warn 138 drivers/perf/arm_pmu_platform.c pr_warn("multiple PPIs or mismatched SPI/PPI detected\n"); pr_warn 149 drivers/perf/arm_pmu_platform.c pr_warn("multiple PMU IRQs for the same CPU detected\n"); pr_warn 218 drivers/perf/arm_pmu_platform.c pr_warn("ignoring \"secure-reg-access\" property for arm64\n"); pr_warn 260 drivers/pinctrl/aspeed/pinctrl-aspeed.c pr_warn("No function %s found on pin %s (%d). Found signal(s) %s for function(s) %s\n", pr_warn 335 drivers/pinctrl/aspeed/pinctrl-aspeed.c pr_warn("No GPIO signal type found on pin %s (%d). Found: %s\n", pr_warn 1857 drivers/pinctrl/core.c pr_warn("failed to determine debugfs dir name for %s\n", pr_warn 1869 drivers/pinctrl/core.c pr_warn("failed to create debugfs directory for %s\n", pr_warn 1894 drivers/pinctrl/core.c pr_warn("failed to create debugfs directory\n"); pr_warn 1598 drivers/pinctrl/pinctrl-at91.c pr_warn("AT91: No type for GPIO irq offset %d\n", d->irq); pr_warn 475 drivers/pinctrl/pinctrl-st.c pr_warn("Attempt to set delay %d, closest available %d\n", pr_warn 498 drivers/pinctrl/pinctrl-st.c pr_warn("Delay not found in/out delay list\n"); pr_warn 1185 drivers/pinctrl/pinctrl-st.c pr_warn("Invalid st,pins in %pOFn node\n", np); pr_warn 742 drivers/pinctrl/sh-pfc/core.c pr_warn("%s: reg 0x%x: reserved field [%u:%u] can be split to reduce table size\n", pr_warn 842 drivers/pinctrl/sh-pfc/core.c pr_warn("%s: group %s referenced by %u functions\n", pr_warn 859 drivers/pinctrl/sh-pfc/core.c pr_warn("Checking builtin pinmux tables\n"); pr_warn 869 drivers/pinctrl/sh-pfc/core.c pr_warn("Detected %u errors and %u warnings\n", sh_pfc_errors, pr_warn 5799 drivers/pinctrl/sirf/pinctrl-atlas7.c pr_warn("%s: gpio [%s] status %#x no interrupt is flagged\n", pr_warn 546 drivers/platform/chrome/cros_ec_lpc.c pr_warn(DRV_NAME ": Looking for %s failed\n", ACPI_DRV_NAME); pr_warn 1088 drivers/platform/x86/acer-wmi.c pr_warn("Unknown buffer length %d\n", obj->buffer.length); pr_warn 1097 drivers/platform/x86/acer-wmi.c pr_warn("Get 0x%x Device Status failed: 0x%x - 0x%x\n", pr_warn 1167 drivers/platform/x86/acer-wmi.c pr_warn("Unknown buffer length %d\n", obj->buffer.length); pr_warn 1176 drivers/platform/x86/acer-wmi.c pr_warn("Get Current Device Status failed: 0x%x - 0x%x\n", pr_warn 1198 drivers/platform/x86/acer-wmi.c pr_warn("Unknown buffer length %d\n", obj->buffer.length); pr_warn 1207 drivers/platform/x86/acer-wmi.c pr_warn("Set Device Status failed: 0x%x - 0x%x\n", pr_warn 1718 drivers/platform/x86/acer-wmi.c pr_warn("bad event status 0x%x\n", status); pr_warn 1727 drivers/platform/x86/acer-wmi.c pr_warn("Unknown response received %d\n", obj->type); pr_warn 1732 drivers/platform/x86/acer-wmi.c pr_warn("Unknown buffer length %d\n", obj->buffer.length); pr_warn 1748 drivers/platform/x86/acer-wmi.c pr_warn("Unknown key number - 0x%x\n", pr_warn 1776 drivers/platform/x86/acer-wmi.c pr_warn("Unknown function number - %d - %d\n", pr_warn 1805 drivers/platform/x86/acer-wmi.c pr_warn("Unknown buffer length %d\n", obj->buffer.length); pr_warn 1831 drivers/platform/x86/acer-wmi.c pr_warn("Enabling EC raw mode failed: 0x%x - 0x%x\n", pr_warn 1855 drivers/platform/x86/acer-wmi.c pr_warn("Enabling Launch Manager failed: 0x%x - 0x%x\n", pr_warn 1877 drivers/platform/x86/acer-wmi.c pr_warn("Enabling RF Button failed: 0x%x - 0x%x\n", pr_warn 2215 drivers/platform/x86/acer-wmi.c pr_warn("Cannot enable RF Button Driver\n"); pr_warn 2236 drivers/platform/x86/acer-wmi.c pr_warn("Cannot enable accelerometer\n"); pr_warn 783 drivers/platform/x86/alienware-wmi.c pr_warn("alienware-wmi: No known WMI GUID found\n"); pr_warn 481 drivers/platform/x86/apple-gmux.c pr_warn("Timeout waiting for gmux switch to complete\n"); pr_warn 734 drivers/platform/x86/apple-gmux.c pr_warn("No GPE found for gmux\n"); pr_warn 409 drivers/platform/x86/asus-laptop.c pr_warn("Error finding %s\n", method); pr_warn 595 drivers/platform/x86/asus-laptop.c pr_warn("Error reading kled level\n"); pr_warn 609 drivers/platform/x86/asus-laptop.c pr_warn("Keyboard LED display write failed\n"); pr_warn 764 drivers/platform/x86/asus-laptop.c pr_warn("Error reading brightness\n"); pr_warn 776 drivers/platform/x86/asus-laptop.c pr_warn("Error changing brightness\n"); pr_warn 957 drivers/platform/x86/asus-laptop.c pr_warn("LED display write failed\n"); pr_warn 980 drivers/platform/x86/asus-laptop.c pr_warn("Error reading Wireless status\n"); pr_warn 992 drivers/platform/x86/asus-laptop.c pr_warn("Error setting wlan status to %d\n", status); pr_warn 1021 drivers/platform/x86/asus-laptop.c pr_warn("Error setting bluetooth status to %d\n", status); pr_warn 1051 drivers/platform/x86/asus-laptop.c pr_warn("Error setting wimax status to %d\n", status); pr_warn 1080 drivers/platform/x86/asus-laptop.c pr_warn("Error setting wwan status to %d\n", status); pr_warn 1110 drivers/platform/x86/asus-laptop.c pr_warn("Error setting display\n"); pr_warn 1183 drivers/platform/x86/asus-laptop.c pr_warn("Error setting light sensor level\n"); pr_warn 1254 drivers/platform/x86/asus-laptop.c pr_warn("Error reading GPS status\n"); pr_warn 1503 drivers/platform/x86/asus-laptop.c pr_warn("Unable to register input device\n"); pr_warn 1701 drivers/platform/x86/asus-laptop.c pr_warn("Couldn't get the DSDT table header\n"); pr_warn 1713 drivers/platform/x86/asus-laptop.c pr_warn("Error calling BSTS\n"); pr_warn 436 drivers/platform/x86/asus-nb-wmi.c pr_warn("Unable to install key filter\n"); pr_warn 790 drivers/platform/x86/asus-wmi.c pr_warn("Unable to find PCI bus 1?\n"); pr_warn 801 drivers/platform/x86/asus-wmi.c pr_warn("BIOS says wireless lan is %s, " pr_warn 805 drivers/platform/x86/asus-wmi.c pr_warn("skipped wireless hotplug as probably " pr_warn 865 drivers/platform/x86/asus-wmi.c pr_warn("Failed to register notify on %s\n", node); pr_warn 1377 drivers/platform/x86/asus-wmi.c pr_warn("Setting fan speed failed: %d\n", state); pr_warn 1409 drivers/platform/x86/asus-wmi.c pr_warn("reading fan speed failed: %d\n", ret); pr_warn 1648 drivers/platform/x86/asus-wmi.c pr_warn("Failed to set fan boost mode: %d\n", err); pr_warn 1653 drivers/platform/x86/asus-wmi.c pr_warn("Failed to set fan boost mode (retval): 0x%x\n", pr_warn 1701 drivers/platform/x86/asus-wmi.c pr_warn("Trying to store invalid value\n"); pr_warn 1935 drivers/platform/x86/asus-wmi.c pr_warn("Failed to get WMI notify code: %s\n", pr_warn 2022 drivers/platform/x86/asus-wmi.c pr_warn("Failed to get notify code: %d\n", code); pr_warn 2039 drivers/platform/x86/asus-wmi.c pr_warn("Failed to process event queue, last code: 0x%x\n", code); pr_warn 2050 drivers/platform/x86/asus-wmi.c pr_warn("Failed to get event during flush: %d\n", code); pr_warn 2058 drivers/platform/x86/asus-wmi.c pr_warn("Failed to flush event queue\n"); pr_warn 2632 drivers/platform/x86/asus-wmi.c pr_warn("ASUS Management GUID not found\n"); pr_warn 2637 drivers/platform/x86/asus-wmi.c pr_warn("ASUS Event GUID not found\n"); pr_warn 848 drivers/platform/x86/dell-laptop.c pr_warn("Unable to register dell rbtn notifier\n"); pr_warn 853 drivers/platform/x86/dell-laptop.c pr_warn("Unable to install key filter\n"); pr_warn 2013 drivers/platform/x86/dell-laptop.c pr_warn("Keyboard brightness level control not supported\n"); pr_warn 2045 drivers/platform/x86/dell-laptop.c pr_warn("Keyboard brightness level control not supported\n"); pr_warn 2192 drivers/platform/x86/dell-laptop.c pr_warn("Unable to setup rfkill\n"); pr_warn 169 drivers/platform/x86/dell-wmi-aio.c pr_warn("No known WMI GUID found\n"); pr_warn 363 drivers/platform/x86/dell-wmi.c pr_warn("bad response type %x\n", obj->type); pr_warn 399 drivers/platform/x86/dell-wmi.c pr_warn("Invalid length of WMI event\n"); pr_warn 533 drivers/platform/x86/dell-wmi.c pr_warn("no DMI; using the old-style hotkey interface\n"); pr_warn 217 drivers/platform/x86/eeepc-laptop.c pr_warn("Error writing %s\n", method); pr_warn 232 drivers/platform/x86/eeepc-laptop.c pr_warn("Error reading %s\n", method); pr_warn 250 drivers/platform/x86/eeepc-laptop.c pr_warn("Error finding %s\n", method); pr_warn 414 drivers/platform/x86/eeepc-laptop.c pr_warn("cpufv enabled (not officially supported on this model)\n"); pr_warn 588 drivers/platform/x86/eeepc-laptop.c pr_warn("Unable to find PCI bus 1?\n"); pr_warn 600 drivers/platform/x86/eeepc-laptop.c pr_warn("BIOS says wireless lan is %s, but the pci device is %s\n", pr_warn 603 drivers/platform/x86/eeepc-laptop.c pr_warn("skipped wireless hotplug as probably inappropriate for this model\n"); pr_warn 671 drivers/platform/x86/eeepc-laptop.c pr_warn("Failed to register notify on %s\n", node); pr_warn 197 drivers/platform/x86/eeepc-wmi.c pr_warn("Found legacy ATKD device (%s)\n", EEEPC_ACPI_HID); pr_warn 198 drivers/platform/x86/eeepc-wmi.c pr_warn("WMI device present, but legacy ATKD device is also " pr_warn 200 drivers/platform/x86/eeepc-wmi.c pr_warn("You probably booted with acpi_osi=\"Linux\" or " pr_warn 202 drivers/platform/x86/eeepc-wmi.c pr_warn("Can't load eeepc-wmi, use default acpi_osi " pr_warn 538 drivers/platform/x86/hdaps.c pr_warn("supported laptop not found!\n"); pr_warn 604 drivers/platform/x86/hdaps.c pr_warn("driver init failed (ret=%d)!\n", ret); pr_warn 250 drivers/platform/x86/hp-wmi.c pr_warn("query 0x%x returned error 0x%x\n", query, ret); pr_warn 394 drivers/platform/x86/hp-wmi.c pr_warn("power configuration of the wireless devices unexpectedly changed\n"); pr_warn 786 drivers/platform/x86/hp-wmi.c pr_warn("unable to parse 0x1b query output\n"); pr_warn 812 drivers/platform/x86/hp-wmi.c pr_warn("unknown device type 0x%x\n", pr_warn 818 drivers/platform/x86/hp-wmi.c pr_warn("zero device %d while %d reported\n", pr_warn 231 drivers/platform/x86/ibm_rtl.c pr_warn("module loaded by force\n"); pr_warn 690 drivers/platform/x86/intel_pmc_core.c pr_warn("Invalid LTR scale factor.\n"); pr_warn 441 drivers/platform/x86/samsung-laptop.c pr_warn("SABI command 0x%04x failed with" pr_warn 1449 drivers/platform/x86/samsung-laptop.c pr_warn("Linux mode was not set!\n"); pr_warn 63 drivers/platform/x86/sony-laptop.c pr_warn(fmt, ##__VA_ARGS__); \ pr_warn 774 drivers/platform/x86/sony-laptop.c pr_warn("Invalid acpi_object: expected 0x%x got 0x%x\n", pr_warn 807 drivers/platform/x86/sony-laptop.c pr_warn("Invalid acpi_object: expected 0x%x got 0x%x\n", pr_warn 1288 drivers/platform/x86/sony-laptop.c pr_warn("method: name: %4.4s, args %X\n", pr_warn 1879 drivers/platform/x86/sony-laptop.c pr_warn("handle 0x%.4x: keyboard backlight setup already done for 0x%.4x\n", pr_warn 2245 drivers/platform/x86/sony-laptop.c pr_warn("couldn't to read the thermal profiles\n"); pr_warn 2251 drivers/platform/x86/sony-laptop.c pr_warn("couldn't to read the current thermal profile"); pr_warn 3152 drivers/platform/x86/sony-laptop.c pr_warn("unable to register backlight device\n"); pr_warn 3193 drivers/platform/x86/sony-laptop.c pr_warn("unable to walk acpi resources\n"); pr_warn 3782 drivers/platform/x86/sony-laptop.c pr_warn("camera control not enabled\n"); pr_warn 3802 drivers/platform/x86/sony-laptop.c pr_warn("camera control not enabled\n"); pr_warn 3825 drivers/platform/x86/sony-laptop.c pr_warn("failed to power on camera\n"); pr_warn 4369 drivers/platform/x86/sony-laptop.c pr_warn("Invalid IRQ %d\n", pr_warn 4438 drivers/platform/x86/sony-laptop.c pr_warn("Unable to read status\n"); pr_warn 4454 drivers/platform/x86/sony-laptop.c pr_warn("Failure evaluating %s\n", METHOD_NAME__PRS); pr_warn 1110 drivers/platform/x86/thinkpad_acpi.c pr_warn("WARNING: sysfs attribute %s is deprecated and will be removed. %s\n", pr_warn 1809 drivers/platform/x86/thinkpad_acpi.c pr_warn("WARNING: Outdated ThinkPad BIOS/EC firmware\n"); pr_warn 1810 drivers/platform/x86/thinkpad_acpi.c pr_warn("WARNING: This firmware may be missing critical bug fixes and/or important features\n"); pr_warn 2169 drivers/platform/x86/thinkpad_acpi.c pr_warn("Multi mode status is undetected, assuming laptop\n"); pr_warn 6997 drivers/platform/x86/thinkpad_acpi.c pr_warn("Cannot enable backlight brightness support, ACPI is already handling it. Refer to the acpi_backlight kernel parameter.\n"); pr_warn 7447 drivers/platform/x86/thinkpad_acpi.c pr_warn("Unexpected SAUM result %d\n", pr_warn 7462 drivers/platform/x86/thinkpad_acpi.c pr_warn("Failed to unmute the HW mute switch\n"); pr_warn 7473 drivers/platform/x86/thinkpad_acpi.c pr_warn("Failed to restore mute mode\n"); pr_warn 7585 drivers/platform/x86/thinkpad_acpi.c pr_warn("Failed to restore software mute\n"); pr_warn 9211 drivers/platform/x86/thinkpad_acpi.c pr_warn("Thinkpad ACPI has no %s interface.\n", t->name); pr_warn 9513 drivers/platform/x86/thinkpad_acpi.c pr_warn("unknown battery %s, assuming primary", battery_name); pr_warn 9726 drivers/platform/x86/thinkpad_acpi.c pr_warn("Thinkpad ACPI has no %s interface.\n", "SSSS"); pr_warn 2844 drivers/platform/x86/toshiba_acpi.c pr_warn("No hotkey query interface found\n"); pr_warn 359 drivers/power/avs/smartreflex.c pr_warn("%s: NULL omap_sr from %pS\n", pr_warn 426 drivers/power/avs/smartreflex.c pr_warn("%s: NULL omap_sr from %pS\n", pr_warn 481 drivers/power/avs/smartreflex.c pr_warn("%s: NULL omap_sr from %pS\n", pr_warn 566 drivers/power/avs/smartreflex.c pr_warn("%s: NULL omap_sr from %pS\n", pr_warn 618 drivers/power/avs/smartreflex.c pr_warn("%s: NULL omap_sr from %pS\n", pr_warn 661 drivers/power/avs/smartreflex.c pr_warn("%s:, Smartreflex class data passed is NULL\n", pr_warn 667 drivers/power/avs/smartreflex.c pr_warn("%s: Smartreflex class driver already registered\n", pr_warn 699 drivers/power/avs/smartreflex.c pr_warn("%s: omap_sr struct for voltdm not found\n", __func__); pr_warn 731 drivers/power/avs/smartreflex.c pr_warn("%s: omap_sr struct for voltdm not found\n", __func__); pr_warn 763 drivers/power/avs/smartreflex.c pr_warn("%s: omap_sr struct for voltdm not found\n", __func__); pr_warn 785 drivers/power/avs/smartreflex.c pr_warn("%s: omap_sr struct not found\n", __func__); pr_warn 799 drivers/power/avs/smartreflex.c pr_warn("%s: omap_sr struct not found\n", __func__); pr_warn 805 drivers/power/avs/smartreflex.c pr_warn("%s: Invalid argument %lld\n", __func__, val); pr_warn 896 drivers/power/avs/smartreflex.c pr_warn("%s: Error in SR late init\n", __func__); pr_warn 1004 drivers/power/supply/power_supply_core.c pr_warn("%s: Expected proper parent device for '%s'\n", pr_warn 483 drivers/ptp/ptp_qoriq.c pr_warn("device tree node missing required elements, try automatic configuration\n"); pr_warn 992 drivers/pwm/core.c pr_warn("PWM device already freed\n"); pr_warn 77 drivers/rapidio/devices/rio_mport_cdev.c pr_warn(DRV_PREFIX "%s WARNING " fmt "\n", __func__, ##arg) pr_warn 63 drivers/rapidio/rio_cm.c pr_warn(DRV_NAME ": %s WARNING " fmt "\n", __func__, ##arg) pr_warn 356 drivers/ras/cec.c pr_warn("CEC: Invalid pfn: 0x%llx\n", pfn); pr_warn 489 drivers/ras/cec.c pr_warn("Error creating cec debugfs node!\n"); pr_warn 496 drivers/ras/cec.c pr_warn("Error creating decay_interval debugfs node!\n"); pr_warn 503 drivers/ras/cec.c pr_warn("Error creating action_threshold debugfs node!\n"); pr_warn 512 drivers/ras/cec.c pr_warn("Error creating pfn debugfs node!\n"); pr_warn 518 drivers/ras/cec.c pr_warn("Error creating array debugfs node!\n"); pr_warn 41 drivers/regulator/core.c pr_warn("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) pr_warn 5652 drivers/regulator/core.c pr_warn("regulator: Failed to create debugfs directory\n"); pr_warn 158 drivers/regulator/max77686-regulator.c pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n", pr_warn 192 drivers/regulator/max77686-regulator.c pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n", pr_warn 240 drivers/regulator/max77686-regulator.c pr_warn("%s: ramp_delay: %d not supported, setting 100000\n", pr_warn 101 drivers/regulator/of_regulator.c pr_warn("%pOFn: ambiguous configuration for settling time, ignoring 'regulator-settling-time-up-us'\n", pr_warn 111 drivers/regulator/of_regulator.c pr_warn("%pOFn: ambiguous configuration for settling time, ignoring 'regulator-settling-time-down-us'\n", pr_warn 137 drivers/regulator/of_regulator.c pr_warn("%pOFn: mapping for mode %d not defined\n", pr_warn 165 drivers/regulator/of_regulator.c pr_warn("%pOFn: mode mapping not defined\n", np); pr_warn 222 drivers/regulator/of_regulator.c pr_warn("%pOFn: mapping for mode %d not defined\n", pr_warn 361 drivers/regulator/rk808-regulator.c pr_warn("%s ramp_delay: %d not supported, setting 10000\n", pr_warn 178 drivers/reset/core.c pr_warn("%s(): reset lookup entry badly specified, skipping\n", pr_warn 52 drivers/reset/reset-socfpga.c pr_warn("missing altr,modrst-offset property, assuming 0x10\n"); pr_warn 106 drivers/rtc/rtc-max8997.c pr_warn("RTC cannot handle the year %d. Assume it's 2000.\n", pr_warn 117 drivers/rtc/rtc-msm6242.c pr_warn("timed out waiting for RTC (0x%x)\n", pr_warn 33 drivers/rtc/rtc-sun4v.c pr_warn("tod_get() timed out.\n"); pr_warn 36 drivers/rtc/rtc-sun4v.c pr_warn("tod_get() not supported.\n"); pr_warn 60 drivers/rtc/rtc-sun4v.c pr_warn("tod_set() timed out.\n"); pr_warn 63 drivers/rtc/rtc-sun4v.c pr_warn("tod_set() not supported.\n"); pr_warn 3460 drivers/s390/block/dasd.c pr_warn("%s: Setting the DASD online failed with rc=%d\n", pr_warn 3577 drivers/s390/block/dasd.c pr_warn("%s Setting the DASD online failed " pr_warn 3589 drivers/s390/block/dasd.c pr_warn("%s Setting the DASD online failed because of missing DIAG discipline\n", pr_warn 3611 drivers/s390/block/dasd.c pr_warn("%s Setting the DASD online with discipline %s failed with rc=%i\n", pr_warn 3621 drivers/s390/block/dasd.c pr_warn("%s Setting the DASD online failed because of a missing discipline\n", pr_warn 3665 drivers/s390/block/dasd.c pr_warn("%s: The DASD cannot be set offline with open count %i\n", pr_warn 3668 drivers/s390/block/dasd.c pr_warn("%s: The DASD cannot be set offline while it is in use\n", pr_warn 206 drivers/s390/block/dasd_devmap.c pr_warn("%.*s is not a supported device option\n", pr_warn 297 drivers/s390/block/dasd_devmap.c pr_warn("A closing parenthesis ')' is missing in the dasd= parameter\n"); pr_warn 152 drivers/s390/block/dasd_diag.c pr_warn("%s: The access mode of a DIAG device changed to read-only\n", pr_warn 157 drivers/s390/block/dasd_diag.c pr_warn("%s: DIAG ERP failed with rc=%d\n", pr_warn 374 drivers/s390/block/dasd_diag.c pr_warn("%s: Device type %d is not supported in DIAG mode\n", pr_warn 417 drivers/s390/block/dasd_diag.c pr_warn("%s: A 64-bit DIAG call failed\n", pr_warn 427 drivers/s390/block/dasd_diag.c pr_warn("%s: Accessing the DASD failed because of an incorrect format (rc=%d)\n", pr_warn 446 drivers/s390/block/dasd_diag.c pr_warn("%s: DIAG initialization failed with rc=%d\n", pr_warn 6259 drivers/s390/block/dasd_eckd.c pr_warn("Service on the storage server caused path %x.%02x to go offline", pr_warn 181 drivers/s390/block/dasd_genhd.c pr_warn("Registering the device driver with major number %d failed\n", pr_warn 213 drivers/s390/block/dasd_ioctl.c pr_warn("%s: The DASD cannot be formatted while it is enabled\n", pr_warn 285 drivers/s390/block/dasd_ioctl.c pr_warn("%s: The specified DASD is a partition and cannot be formatted\n", pr_warn 312 drivers/s390/block/dasd_ioctl.c pr_warn("%s: The specified DASD is a partition and cannot be checked\n", pr_warn 370 drivers/s390/block/dasd_ioctl.c pr_warn("%s: The specified DASD is a partition and tracks cannot be released\n", pr_warn 313 drivers/s390/block/dasd_proc.c pr_warn("%s is not a supported value for /proc/dasd/statistics\n", str); pr_warn 318 drivers/s390/block/dasd_proc.c pr_warn("/proc/dasd/statistics: is not activated in this kernel\n"); pr_warn 469 drivers/s390/block/dcssblk.c pr_warn("DCSS %s is of type SN or EN" pr_warn 772 drivers/s390/block/dcssblk.c pr_warn("Device %s cannot be removed because it is not a known device\n", pr_warn 779 drivers/s390/block/dcssblk.c pr_warn("Device %s cannot be removed while it is in use\n", pr_warn 844 drivers/s390/block/dcssblk.c pr_warn("DCSS %s is of type SN or EN and cannot" pr_warn 887 drivers/s390/block/dcssblk.c pr_warn("Writing to %s failed because it is a read-only device\n", pr_warn 261 drivers/s390/char/monreader.c pr_warn("The read queue for monitor data is full\n"); pr_warn 346 drivers/s390/char/monreader.c pr_warn("Disconnecting the z/VM *MONITOR system service failed with rc=%i\n", pr_warn 473 drivers/s390/char/monreader.c pr_warn("Disconnecting the z/VM *MONITOR system service failed with rc=%i\n", pr_warn 71 drivers/s390/char/sclp_cmd.c pr_warn("sync request failed (cmd=0x%08x, status=0x%02x)\n", pr_warn 103 drivers/s390/char/sclp_cmd.c pr_warn("readcpuinfo failed (response=0x%04x)\n", pr_warn 141 drivers/s390/char/sclp_cmd.c pr_warn("configure cpu failed (cmd=0x%08x, response=0x%04x)\n", pr_warn 210 drivers/s390/char/sclp_cmd.c pr_warn("assign storage failed (cmd=0x%08x, response=0x%04x, rn=0x%04x)\n", pr_warn 585 drivers/s390/char/sclp_cmd.c pr_warn("configure channel-path failed (cmd=0x%08x, response=0x%04x)\n", pr_warn 653 drivers/s390/char/sclp_cmd.c pr_warn("read channel-path info failed (response=0x%04x)\n", pr_warn 112 drivers/s390/char/sclp_config.c pr_warn("SCLP receiver did not register to receive " pr_warn 158 drivers/s390/char/sclp_cpi_sys.c pr_warn("request failed (status=0x%02x)\n", req->status); pr_warn 165 drivers/s390/char/sclp_cpi_sys.c pr_warn("request failed with response code 0x%x\n", response); pr_warn 81 drivers/s390/char/sclp_pci.c pr_warn("configure PCI I/O adapter failed: cmd=0x%08x response=0x%04x\n", pr_warn 181 drivers/s390/char/sclp_pci.c pr_warn("request failed (status=0x%02x)\n", pr_warn 188 drivers/s390/char/sclp_pci.c pr_warn("request failed with response code 0x%x\n", pr_warn 258 drivers/s390/char/sclp_sd.c pr_warn("Store Data request failed (eq=%d, di=%d, " pr_warn 703 drivers/s390/char/tape_core.c pr_warn("%s: A tape unit was detached while in use\n", pr_warn 347 drivers/s390/char/vmlogrdr.c pr_warn("vmlogrdr: failed to start recording automatically\n"); pr_warn 399 drivers/s390/char/vmlogrdr.c pr_warn("vmlogrdr: failed to stop recording automatically\n"); pr_warn 55 drivers/s390/cio/blacklist.c pr_warn("0.%x.%04x to 0.%x.%04x is not a valid range for cio_ignore\n", pr_warn 143 drivers/s390/cio/blacklist.c pr_warn("%s is not a valid device for the cio_ignore kernel parameter\n", pr_warn 338 drivers/s390/cio/ccwreq.c pr_warn("%s: No interrupt was received within %lus (CS=%02x, DS=%02x, CHPID=%x.%02x)\n", pr_warn 408 drivers/s390/cio/chsc.c pr_warn("Link degraded: RS=%02x RSID=%04x IC=%02x " pr_warn 657 drivers/s390/cio/cio.c pr_warn("No CCW console was found\n"); pr_warn 331 drivers/s390/cio/device.c pr_warn("%s: The device entered boxed state while being set offline\n", pr_warn 334 drivers/s390/cio/device.c pr_warn("%s: The device stopped operating while being set offline\n", pr_warn 396 drivers/s390/cio/device.c pr_warn("%s: Setting the device online failed because it is boxed\n", pr_warn 399 drivers/s390/cio/device.c pr_warn("%s: Setting the device online failed because it is not operational\n", pr_warn 584 drivers/s390/cio/device.c pr_warn("Logging for subchannel 0.%x.%04x failed with errno=%d\n", pr_warn 1622 drivers/s390/crypto/ap_bus.c pr_warn("The hardware system does not support AP instructions\n"); pr_warn 1640 drivers/s390/crypto/ap_bus.c pr_warn("%d is not a valid cryptographic domain\n", pr_warn 245 drivers/s390/crypto/vfio_ap_ops.c pr_warn("%s: apqn %04x: response: %02x\n", __func__, q->apqn, pr_warn 1738 drivers/s390/net/lcs.c pr_warn("Stoplan for %s initiated by LGW\n", pr_warn 128 drivers/s390/scsi/zfcp_aux.c pr_warn("DIX is enabled. It is experimental and might cause problems\n"); pr_warn 3513 drivers/scsi/aacraid/aachba.c pr_warn("aac_srb_callback: srb failed, status = %d\n", pr_warn 3545 drivers/scsi/aacraid/aachba.c pr_warn("aacraid: SCSI CMD underflow\n"); pr_warn 3547 drivers/scsi/aacraid/aachba.c pr_warn("aacraid: SCSI CMD Data Overrun\n"); pr_warn 3659 drivers/scsi/aacraid/aachba.c pr_warn("aac_srb_callback: check condition, status = %d len=%d\n", pr_warn 3899 drivers/scsi/aacraid/aachba.c pr_warn("aac_hba_cmd_req: aac_fib_send failed with status: %d\n", pr_warn 4217 drivers/scsi/aacraid/aachba.c pr_warn("aacraid: cmd len %08lX cmd underflow %08X\n", pr_warn 141 drivers/scsi/aacraid/comminit.c pr_warn("aacraid: Comm Interface type3 enabled\n"); pr_warn 192 drivers/scsi/aacraid/comminit.c pr_warn("aacraid: Comm Interface enabled\n"); pr_warn 204 drivers/scsi/aacraid/comminit.c pr_warn("aacraid: Comm Interface type1 enabled\n"); pr_warn 219 drivers/scsi/aacraid/comminit.c pr_warn("aacraid: Comm Interface type2 enabled\n"); pr_warn 624 drivers/scsi/aacraid/comminit.c pr_warn("numacb=%d ignored\n", numacb); pr_warn 2007 drivers/scsi/aacraid/commsup.c pr_warn(" AIF not cleared by firmware - %d/%d)\n", pr_warn 2130 drivers/scsi/aacraid/commsup.c pr_warn("aifd: didn't allocate NewFib\n"); pr_warn 898 drivers/scsi/arcmsr/arcmsr_hba.c pr_warn("arcmsr%d: request_irq =%d failed!\n", pr_warn 1105 drivers/scsi/arcmsr/arcmsr_hba.c pr_warn("%s: pci_enable_device error\n", __func__); pr_warn 1041 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c pr_warn("t3 0x%p, offload up, ioctl failed.\n", t3dev); pr_warn 1229 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c pr_warn("T3 %s, iscsi NOT enabled %u ~ %u!\n", pr_warn 1307 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c pr_warn("device 0x%p register failed.\n", t3dev); pr_warn 2080 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_warn("%s, iscsi NOT enabled, check config!\n", ndev->name); pr_warn 84 drivers/scsi/cxgbi/libcxgbi.c pr_warn("cdev 0x%p, portmap OOM %u.\n", cdev, max_conn); pr_warn 141 drivers/scsi/cxgbi/libcxgbi.c pr_warn("nport %d, OOM.\n", nports); pr_warn 492 drivers/scsi/cxgbi/libcxgbi.c pr_warn("cdev 0x%p, p#%u %s, next %u?\n", pr_warn 1046 drivers/scsi/cxgbi/libcxgbi.c pr_warn("csk 0x%p,%u,0x%lx,%u, cr %u,%u+%u, < %u.\n", pr_warn 1063 drivers/scsi/cxgbi/libcxgbi.c pr_warn("csk 0x%p,%u,0x%lx,%u, snd_una %u/%u.", pr_warn 1852 drivers/scsi/cxgbi/libcxgbi.c pr_warn("sg %d NULL, len %u/%u.\n", pr_warn 1868 drivers/scsi/cxgbi/libcxgbi.c pr_warn("too many pages %u, dlen %u.\n", pr_warn 1990 drivers/scsi/cxgbi/libcxgbi.c pr_warn("tpdu, sgl %u, bad offset %u/%u.\n", pr_warn 1997 drivers/scsi/cxgbi/libcxgbi.c pr_warn("tpdu, sgl %u, bad offset %u + %u.\n", pr_warn 64 drivers/scsi/libsas/sas_ata.c pr_warn("%s: Saw error %d. What to do?\n", pr_warn 140 drivers/scsi/libsas/sas_ata.c pr_warn("%s: SAS error %x\n", __func__, stat->stat); pr_warn 439 drivers/scsi/libsas/sas_ata.c pr_warn("%s: Task %p leaked.\n", __func__, task); pr_warn 96 drivers/scsi/libsas/sas_discover.c pr_warn("Port %016llx is disconnected when discovering\n", pr_warn 124 drivers/scsi/libsas/sas_discover.c pr_warn("ERROR: Unidentified device type %d\n", dev->dev_type); pr_warn 182 drivers/scsi/libsas/sas_discover.c pr_warn("driver on host %s cannot handle device %llx, error:%d\n", pr_warn 949 drivers/scsi/libsas/sas_expander.c pr_warn("ex %016llx:%02d:D <--> ex %016llx:0x%x is not allowed\n", pr_warn 1061 drivers/scsi/libsas/sas_expander.c pr_warn("unknown device type(0x%x) attached to ex %016llx phy%02d\n", pr_warn 1279 drivers/scsi/libsas/sas_expander.c pr_warn("edge ex %016llx phy S:%02d <--> edge ex %016llx phy S:%02d, while there is a fanout ex %016llx\n", pr_warn 1302 drivers/scsi/libsas/sas_expander.c pr_warn("edge ex %016llx phy%02d <--> edge ex %016llx phy%02d link forms a third EEDS!\n", pr_warn 1419 drivers/scsi/libsas/sas_expander.c pr_warn("overflow of indexes: dev %016llx phy%02d index 0x%x\n", pr_warn 1489 drivers/scsi/libsas/sas_expander.c pr_warn("overflow of indexes: dev %016llx phy%02d index 0x%x\n", pr_warn 1599 drivers/scsi/libsas/sas_expander.c pr_warn("expander %016llx discovery failed(0x%x)\n", pr_warn 110 drivers/scsi/libsas/sas_internal.h pr_warn("%s: for %s device %16llx returned %d\n", pr_warn 453 drivers/scsi/libsas/sas_scsi_host.c pr_warn("%s reset of %s failed\n", pr_warn 8840 drivers/scsi/megaraid/megaraid_sas_base.c pr_warn("megaraid_sas: provided event log level is out of range, setting it to default 2(CLASS_CRITICAL), permissible range is: -2 to 4\n"); pr_warn 171 drivers/scsi/mpt3sas/mpt3sas_base.h pr_warn("%s: " fmt, (ioc)->name, ##__VA_ARGS__) pr_warn 46 drivers/scsi/qedf/qedf_dbg.c pr_warn("[%s]:[%s:%d]:%d: %pV", dev_name(&(qedf->pdev->dev)), pr_warn 49 drivers/scsi/qedf/qedf_dbg.c pr_warn("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf); pr_warn 47 drivers/scsi/qedi/qedi_dbg.c pr_warn("[%s]:[%s:%d]:%d: %pV", dev_name(&qedi->pdev->dev), pr_warn 50 drivers/scsi/qedi/qedi_dbg.c pr_warn("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf); pr_warn 2552 drivers/scsi/qla2xxx/qla_dbg.c pr_warn("%s [%s]-%04x:%ld: %pV", pr_warn 2556 drivers/scsi/qla2xxx/qla_dbg.c pr_warn("%s [%s]-%04x: : %pV", pr_warn 2595 drivers/scsi/qla2xxx/qla_dbg.c pr_warn("%s [%s]-%04x: : %pV", pr_warn 2648 drivers/scsi/qla2xxx/qla_dbg.c pr_warn("%s%pV", pbuf, &vaf); pr_warn 2702 drivers/scsi/qla2xxx/qla_dbg.c pr_warn("%s%pV", pbuf, &vaf); pr_warn 2807 drivers/scsi/qla2xxx/qla_dbg.c pr_warn("%s%pV", pbuf, &vaf); pr_warn 2848 drivers/scsi/qla2xxx/qla_dbg.c pr_warn("%s [%s]-%04x: %pV", pr_warn 2852 drivers/scsi/qla2xxx/qla_dbg.c pr_warn("%s [%s]-%04x: : %pV", pr_warn 562 drivers/scsi/qla2xxx/qla_mbx.c pr_warn("%s [%s]-%04x:%ld: **** Failed=%x", QL_MSGHDR, pr_warn 572 drivers/scsi/qla2xxx/qla_mbx.c pr_warn(" cmd=%x ****\n", command); pr_warn 879 drivers/scsi/scsi_debug.c pr_warn("unexpected cdb_len=%d, force to 10\n", pr_warn 986 drivers/scsi/scsi_debug.c pr_warn("unexpected unit attention code=%d\n", k); pr_warn 4159 drivers/scsi/scsi_debug.c pr_warn("reducing partitions to %d\n", SDEBUG_MAX_PARTS); pr_warn 4874 drivers/scsi/scsi_debug.c pr_warn("max_luns can be no more than 256\n"); pr_warn 5236 drivers/scsi/scsi_debug.c pr_warn("ndelay must be less than 1 second, ignored\n"); pr_warn 5286 drivers/scsi/scsi_debug.c pr_warn("max_luns can be no more than 256, use default\n"); pr_warn 5397 drivers/scsi/scsi_debug.c pr_warn("root_device_register() error\n"); pr_warn 5403 drivers/scsi/scsi_debug.c pr_warn("bus_register error: %d\n", ret); pr_warn 5408 drivers/scsi/scsi_debug.c pr_warn("driver_register error: %d\n", ret); pr_warn 5797 drivers/scsi/scsi_debug.c pr_warn("%s: trim submit_queues (was %d) to nr_cpu_ids=%u\n", pr_warn 1511 drivers/scsi/sg.c pr_warn("%s: alloc_disk failed\n", __func__); pr_warn 1519 drivers/scsi/sg.c pr_warn("%s: cdev_alloc failed\n", __func__); pr_warn 1527 drivers/scsi/sg.c pr_warn("%s: sg_alloc failed\n", __func__); pr_warn 1555 drivers/scsi/sg.c pr_warn("%s: sg_sys Invalid\n", __func__); pr_warn 8011 drivers/scsi/smartpqi/smartpqi_init.c pr_warn("%s: invalid lockup action setting \"%s\" - supported settings: none, reboot, panic\n", pr_warn 4381 drivers/scsi/st.c pr_warn("st: idr allocation failed: %d\n", error); pr_warn 171 drivers/soc/atmel/soc.c pr_warn("Could not map DBGU iomem range"); pr_warn 196 drivers/soc/atmel/soc.c pr_warn("Could not map DBGU iomem range"); pr_warn 226 drivers/soc/atmel/soc.c pr_warn("Could not find identification node"); pr_warn 239 drivers/soc/atmel/soc.c pr_warn("Could not find matching SoC description\n"); pr_warn 255 drivers/soc/atmel/soc.c pr_warn("Could not register SoC device\n"); pr_warn 731 drivers/soc/bcm/brcmstb/pm/pm-arm.c pr_warn("too many MEMCs (max %d)\n", MAX_NUM_MEMC); pr_warn 813 drivers/soc/bcm/brcmstb/pm/pm-arm.c pr_warn("PM: initialization failed with code %d\n", ret); pr_warn 407 drivers/soc/bcm/brcmstb/pm/pm-mips.c pr_warn("Too many MEMCs (max %d)\n", MAX_NUM_MEMC); pr_warn 137 drivers/soc/fsl/dpaa2-console.c pr_warn("expected = %08x, read = %08x\n", pr_warn 226 drivers/soc/qcom/spm.c pr_warn("%s: cpuidle states reached max possible\n", pr_warn 86 drivers/soc/renesas/rcar-rst.c pr_warn("%pOF: Cannot map regs\n", np); pr_warn 97 drivers/soc/renesas/rcar-rst.c pr_warn("%pOF: Cannot run SoC specific configuration\n", pr_warn 356 drivers/soc/renesas/rcar-sysc.c pr_warn("%pOF: Cannot map regs\n", np); pr_warn 407 drivers/soc/renesas/rcar-sysc.c pr_warn("Failed to add PM subdomain %s to parent %u\n", pr_warn 309 drivers/soc/renesas/renesas-soc.c pr_warn("SoC mismatch (product = 0x%x)\n", pr_warn 342 drivers/soc/renesas/renesas-soc.c pr_warn("SoC mismatch (product = 0x%x)\n", product); pr_warn 179 drivers/soc/renesas/rmobile-sysc.c pr_warn("Too many special PM domains\n"); pr_warn 324 drivers/soc/renesas/rmobile-sysc.c pr_warn("%pOF cannot map reg 0\n", np); pr_warn 330 drivers/soc/renesas/rmobile-sysc.c pr_warn("%pOF lacks pm-domains node\n", np); pr_warn 130 drivers/soc/samsung/pm_domains.c pr_warn("%s: failed to map memory\n", __func__); pr_warn 159 drivers/soc/samsung/pm_domains.c pr_warn("%pOF failed to add subdomain: %pOF\n", pr_warn 291 drivers/soc/tegra/fuse/fuse-tegra.c pr_warn("Unsupported SoC: %02x\n", chip); pr_warn 128 drivers/soc/tegra/fuse/speedo-tegra124.c pr_warn("Tegra Warning: Speedo value not fused.\n"); pr_warn 219 drivers/soc/tegra/fuse/speedo-tegra30.c pr_warn("Tegra Unknown SKU %d\n", sku_info->sku_id); pr_warn 227 drivers/soc/tegra/fuse/speedo-tegra30.c pr_warn("Tegra Unknown chip rev %d\n", sku_info->revision); pr_warn 259 drivers/soc/tegra/fuse/speedo-tegra30.c pr_warn("Tegra CPU speedo value %3d out of range", pr_warn 272 drivers/soc/tegra/fuse/speedo-tegra30.c pr_warn("Tegra SoC speedo value %3d out of range", pr_warn 136 drivers/soc/tegra/fuse/tegra-apbmisc.c pr_warn("Using APBMISC region %pR\n", &apbmisc); pr_warn 137 drivers/soc/tegra/fuse/tegra-apbmisc.c pr_warn("Using strapping options registers %pR\n", pr_warn 372 drivers/soc/tegra/pmc.c pr_warn("%s(): SMC failed: %lu\n", __func__, pr_warn 395 drivers/soc/tegra/pmc.c pr_warn("%s(): SMC failed: %lu\n", __func__, pr_warn 2869 drivers/soc/tegra/pmc.c pr_warn("DT node not found, powergating disabled\n"); pr_warn 2875 drivers/soc/tegra/pmc.c pr_warn("Using memory region %pR\n", ®s); pr_warn 417 drivers/soc/ti/pm33xx.c pr_warn("PM: rtc0 not available"); pr_warn 427 drivers/soc/ti/pm33xx.c pr_warn("PM: bootloader does not support rtc-only!\n"); pr_warn 436 drivers/soc/ti/pm33xx.c pr_warn("PM: no-rtc available, rtc-only mode disabled.\n"); pr_warn 39 drivers/soundwire/stream.c pr_warn("Requested column not found, selecting lowest column no: 2\n"); pr_warn 53 drivers/soundwire/stream.c pr_warn("Requested row not found, selecting lowest row no: 48\n"); pr_warn 519 drivers/spi/spi-fsl-dspi.c pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld, we use the max prescaler value.\n", pr_warn 553 drivers/spi/spi-fsl-dspi.c pr_warn("Cannot find correct scale values for %dns delay at clkrate %ld, using max prescaler value", pr_warn 197 drivers/spi/spi-lm70llp.c pr_warn("spi_lm70llp instance already loaded. Aborting.\n"); pr_warn 189 drivers/ssb/host_soc.c pr_warn("Couldn't parse nvram board vendor entry with value \"%s\"\n", pr_warn 199 drivers/ssb/host_soc.c pr_warn("Couldn't parse nvram board type entry with value \"%s\"\n", pr_warn 843 drivers/ssb/pci.c pr_warn("Unsupported SPROM revision %d detected. Will extract v1\n", pr_warn 908 drivers/ssb/pci.c pr_warn("WARNING: Using fallback SPROM failed (err %d)\n", pr_warn 917 drivers/ssb/pci.c pr_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n"); pr_warn 375 drivers/ssb/scan.c pr_warn("WARNING: Multiple EXTIFs found\n"); pr_warn 383 drivers/ssb/scan.c pr_warn("WARNING: Multiple ChipCommon found\n"); pr_warn 392 drivers/ssb/scan.c pr_warn("WARNING: Multiple MIPS cores found\n"); pr_warn 413 drivers/ssb/scan.c pr_warn("WARNING: Multiple PCI(E) cores found\n"); pr_warn 170 drivers/staging/board/board.c pr_warn("Skipping %s, already in DT\n", pdev->name); pr_warn 1244 drivers/staging/comedi/comedi_fops.c pr_warn("No check for data length of config insn id %i is implemented\n", pr_warn 1246 drivers/staging/comedi/comedi_fops.c pr_warn("Add a check to %s in %s\n", __func__, __FILE__); pr_warn 1247 drivers/staging/comedi/comedi_fops.c pr_warn("Assuming n=%i is correct\n", insn->n); pr_warn 1039 drivers/staging/comedi/drivers.c pr_warn("BUG! %s called with NULL hardware_device\n", __func__); pr_warn 802 drivers/staging/comedi/drivers/comedi_test.c pr_warn("comedi_test: unable to create class\n"); pr_warn 808 drivers/staging/comedi/drivers/comedi_test.c pr_warn("comedi_test: unable to create device\n"); pr_warn 814 drivers/staging/comedi/drivers/comedi_test.c pr_warn("comedi_test: unable to auto-configure device\n"); pr_warn 524 drivers/staging/comedi/drivers/mite.c pr_warn("bug! invalid mem bit width for dma transfer\n"); pr_warn 543 drivers/staging/comedi/drivers/mite.c pr_warn("bug! invalid dev bit width for dma transfer\n"); pr_warn 68 drivers/staging/comedi/proc.c pr_warn("comedi: unable to create proc entry\n"); pr_warn 2937 drivers/staging/emxx_udc/emxx_udc.c pr_warn("%s, Not Regist Driver\n", __func__); pr_warn 636 drivers/staging/exfat/exfat_core.c pr_warn("discard not supported by device, disabling"); pr_warn 104 drivers/staging/greybus/audio_manager.c pr_warn("Not all nodes were deleted\n"); pr_warn 91 drivers/staging/greybus/audio_manager_sysfs.c pr_warn("creating the sysfs entry for %s failed: %d\n", pr_warn 86 drivers/staging/media/ipu3/ipu3-css-fw.c pr_warn("parameter size doesn't match defined size\n"); pr_warn 472 drivers/staging/most/dim2/dim2.c pr_warn("%s: fixed buffer size (%d -> %d)\n", pr_warn 486 drivers/staging/most/dim2/dim2.c pr_warn("%s: fixed buffer size (%d -> %d)\n", pr_warn 501 drivers/staging/most/dim2/dim2.c pr_warn("%s: fixed buffer size (%d -> %d)\n", pr_warn 515 drivers/staging/most/dim2/dim2.c pr_warn("%s: fixed buffer size (%d -> %d)\n", pr_warn 193 drivers/staging/most/usb/usb.c pr_warn("Misconfig: Subbuffer size zero.\n"); pr_warn 202 drivers/staging/most/usb/usb.c pr_warn("Misconfig: Packets per XACT zero\n"); pr_warn 211 drivers/staging/most/usb/usb.c pr_warn("Query frame size of non-streaming channel\n"); pr_warn 62 drivers/staging/octeon/ethernet-mem.c pr_warn("Freeing of pool %u had too many skbuffs (%d)\n", pr_warn 65 drivers/staging/octeon/ethernet-mem.c pr_warn("Freeing of pool %u is missing %d skbuffs\n", pr_warn 96 drivers/staging/octeon/ethernet-mem.c pr_warn("Unable to allocate %u bytes for FPA pool %d\n", pr_warn 130 drivers/staging/octeon/ethernet-mem.c pr_warn("Freeing of pool %u had too many buffers (%d)\n", pr_warn 133 drivers/staging/octeon/ethernet-mem.c pr_warn("Warning: Freeing of pool %u is missing %d buffers\n", pr_warn 127 drivers/staging/olpc_dcon/olpc_dcon.c pr_warn("unable to force dcon to power up: %d!\n", x); pr_warn 210 drivers/staging/olpc_dcon/olpc_dcon.c pr_warn("unable to force dcon to power down: %d!\n", x); pr_warn 219 drivers/staging/olpc_dcon/olpc_dcon.c pr_warn("unable to reinit dcon hardware: %d!\n", x); pr_warn 821 drivers/staging/sm750fb/sm750.c pr_warn("use specified mode:%s in %s,with an ignored refresh rate\n", pr_warn 826 drivers/staging/sm750fb/sm750.c pr_warn("wanna use default mode\n"); pr_warn 829 drivers/staging/sm750fb/sm750.c pr_warn("fall back to any valid mode\n"); pr_warn 831 drivers/staging/sm750fb/sm750.c pr_warn("ret = %d,fb_find_mode failed,with %s\n", pr_warn 1173 drivers/staging/sm750fb/sm750.c pr_warn("no options.\n"); pr_warn 81 drivers/staging/speakup/devsynth.c pr_warn("Couldn't initialize miscdevice /dev/synth.\n"); pr_warn 301 drivers/staging/speakup/kobjects.c pr_warn("i %d %d %d %d\n", i, pr_warn 315 drivers/staging/speakup/kobjects.c pr_warn("end %d %d %d %d\n", i, pr_warn 321 drivers/staging/speakup/kobjects.c pr_warn("set key failed\n"); pr_warn 348 drivers/staging/speakup/kobjects.c pr_warn("silent value '%c' not in range (0,7)\n", ch); pr_warn 401 drivers/staging/speakup/kobjects.c pr_warn("%s already in use\n", new_synth_name); pr_warn 403 drivers/staging/speakup/kobjects.c pr_warn("failed to init synth %s\n", new_synth_name); pr_warn 472 drivers/staging/speakup/kobjects.c pr_warn("p_header is null, attr->attr.name is %s\n", pr_warn 479 drivers/staging/speakup/kobjects.c pr_warn("var is null, p_header->var_id is %i\n", pr_warn 514 drivers/staging/speakup/kobjects.c pr_warn("p_header is null, attr->attr.name is %s\n", pr_warn 521 drivers/staging/speakup/kobjects.c pr_warn("var is null, p_header->var_id is %i\n", pr_warn 655 drivers/staging/speakup/kobjects.c pr_warn("overflow or parsing error has occurred"); pr_warn 658 drivers/staging/speakup/kobjects.c pr_warn("value for %s out of range, expect %d to %d\n", pr_warn 688 drivers/staging/speakup/kobjects.c pr_warn("value too long for %s\n", pr_warn 692 drivers/staging/speakup/kobjects.c pr_warn("%s unknown type %d\n", pr_warn 367 drivers/staging/speakup/main.c pr_warn("%sEFAULT\n", err_buf); pr_warn 370 drivers/staging/speakup/main.c pr_warn("%sEINVAL\n", err_buf); pr_warn 373 drivers/staging/speakup/main.c pr_warn("%sENOMEM\n", err_buf); pr_warn 50 drivers/staging/speakup/selection.c pr_warn("Selection: mark console not the same as cut\n"); pr_warn 78 drivers/staging/speakup/serialio.c pr_warn("Unable to allocate port at %x, errno %i", pr_warn 186 drivers/staging/speakup/serialio.c pr_warn("ttyS%i is an invalid port\n", synth->ser); pr_warn 219 drivers/staging/speakup/serialio.c pr_warn("%s: too many timeouts, deactivating speakup\n", pr_warn 232 drivers/staging/speakup/serialio.c pr_warn("%s: timed out (tx busy)\n", pr_warn 258 drivers/staging/speakup/serialio.c pr_warn("time out while waiting for input.\n"); pr_warn 259 drivers/staging/speakup/speakup_acntpc.c pr_warn("sorry, port already reserved\n"); pr_warn 268 drivers/staging/speakup/speakup_acntpc.c pr_warn pr_warn 351 drivers/staging/speakup/speakup_decpc.c pr_warn("dec_pc at 0x%x, software not loaded\n", pr_warn 453 drivers/staging/speakup/speakup_decpc.c pr_warn("request_region: failed with 0x%x, %d\n", pr_warn 331 drivers/staging/speakup/speakup_dtlk.c pr_warn("sorry, port already reserved\n"); pr_warn 139 drivers/staging/speakup/speakup_keypc.c pr_warn("synth timeout %d %d %d %d\n", s1, s2, s3, s4); pr_warn 265 drivers/staging/speakup/speakup_keypc.c pr_warn("sorry, port already reserved\n"); pr_warn 273 drivers/staging/speakup/speakup_keypc.c pr_warn pr_warn 382 drivers/staging/speakup/speakup_soft.c pr_warn("Couldn't initialize miscdevice /dev/softsynth.\n"); pr_warn 391 drivers/staging/speakup/speakup_soft.c pr_warn("Couldn't initialize miscdevice /dev/softsynth.\n"); pr_warn 17 drivers/staging/speakup/spk_priv.h #ifndef pr_warn pr_warn 177 drivers/staging/speakup/spk_ttyio.c pr_warn("speakup: Failed to set hardware flow control\n"); pr_warn 192 drivers/staging/speakup/spk_ttyio.c pr_warn("speakup: Error registering line discipline. Most synths won't work.\n"); pr_warn 198 drivers/staging/speakup/spk_ttyio.c pr_warn("speakup: Couldn't unregister ldisc\n"); pr_warn 212 drivers/staging/speakup/spk_ttyio.c pr_warn("%s: I/O error, deactivating speakup\n", pr_warn 249 drivers/staging/speakup/spk_ttyio.c pr_warn("%s: I/O error, deactivating speakup\n", pr_warn 297 drivers/staging/speakup/spk_ttyio.c pr_warn("spk_ttyio: timeout (%d) while waiting for input\n", pr_warn 168 drivers/staging/speakup/synth.c pr_warn("%s: can't restart synth\n", synth->long_name); pr_warn 397 drivers/staging/speakup/synth.c pr_warn("synth probe\n"); pr_warn 399 drivers/staging/speakup/synth.c pr_warn("%s: device probe failed\n", in_synth->name); pr_warn 907 drivers/staging/vc04_services/bcm2835-camera/controls.c pr_warn("mmal_ctrl:%p ctrl id:%d\n", mmal_ctrl, ctrl->id); pr_warn 913 drivers/staging/vc04_services/bcm2835-camera/controls.c pr_warn("ctrl id:%d/MMAL param %08X- returned ret %d\n", pr_warn 327 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_warn("short read as not enough receive buffer space\n"); pr_warn 467 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_warn("error %d in reply\n", msg->h.status); pr_warn 578 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c pr_warn("%s: invalid tx_pos: %d\n", __func__, tx_pos); pr_warn 309 drivers/staging/vme/devices/vme_user.c pr_warn("Partial copy from userspace\n"); pr_warn 335 drivers/staging/vme/devices/vme_user.c pr_warn("Partial copy to userspace\n"); pr_warn 344 drivers/staging/vme/devices/vme_user.c pr_warn("Can't adjust mapped window\n"); pr_warn 350 drivers/staging/vme/devices/vme_user.c pr_warn("Partial copy from userspace\n"); pr_warn 380 drivers/staging/vme/devices/vme_user.c pr_warn("Partial copy to userspace\n"); pr_warn 390 drivers/staging/vme/devices/vme_user.c pr_warn("Partial copy from userspace\n"); pr_warn 704 drivers/staging/wlan-ng/hfa384x_usb.c pr_warn("RID len mismatch, rid=0x%04x hlen=%d fwlen=%d\n", pr_warn 703 drivers/staging/wlan-ng/prism2fw.c pr_warn("warning: Failed to find PDR for plugrec 0x%04x.\n", pr_warn 1472 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_warn("csk %u without VLAN Tag on DCB Link\n", csk->tid); pr_warn 1845 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_warn("csk 0x%p,%u, cr %u,%u+%u, < %u.\n", pr_warn 1865 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_warn("csk 0x%p,%u, snd_una %u/%u.", pr_warn 304 drivers/target/iscsi/cxgbit/cxgbit_ddp.c pr_warn("%s, iscsi NOT enabled, check config!\n", ndev->name); pr_warn 1033 drivers/target/iscsi/iscsi_target.c pr_warn("ISCSI_FLAG_CMD_READ or ISCSI_FLAG_CMD_WRITE" pr_warn 88 drivers/target/iscsi/iscsi_target_configfs.c pr_warn("Unable to request_module for %s\n", pr_warn 431 drivers/target/iscsi/iscsi_target_login.c pr_warn("Aligning ISER MaxRecvDataSegmentLength: %lu down" pr_warn 285 drivers/target/sbp/sbp_target.c pr_warn("failed to read peer GUID: %d\n", ret); pr_warn 327 drivers/target/sbp/sbp_target.c pr_warn("refusing exclusive login with other active logins\n"); pr_warn 340 drivers/target/sbp/sbp_target.c pr_warn("refusing login while another exclusive login present\n"); pr_warn 354 drivers/target/sbp/sbp_target.c pr_warn("max number of logins reached\n"); pr_warn 501 drivers/target/sbp/sbp_target.c pr_warn("failed to read peer GUID: %d\n", ret); pr_warn 561 drivers/target/sbp/sbp_target.c pr_warn("cannot find login: %d\n", id); pr_warn 573 drivers/target/sbp/sbp_target.c pr_warn("logout from different node ID\n"); pr_warn 65 drivers/target/target_core_alua.c pr_warn("REPORT REFERRALS allocation length %u too" pr_warn 155 drivers/target/target_core_alua.c pr_warn("REPORT TARGET PORT GROUPS allocation length %u too" pr_warn 282 drivers/target/target_core_alua.c pr_warn("SET TARGET PORT GROUPS parameter list length %u too" pr_warn 1427 drivers/target/target_core_alua.c pr_warn("ALUA LU Group already has a valid ID," pr_warn 1449 drivers/target/target_core_alua.c pr_warn("ALUA Logical Unit Group ID: %hu" pr_warn 1695 drivers/target/target_core_alua.c pr_warn("ALUA TG PT Group already has a valid ID," pr_warn 612 drivers/target/target_core_configfs.c pr_warn("dev[%p]: Backstore name '%s' is too long for " pr_warn 801 drivers/target/target_core_configfs.c pr_warn("DIF protection enabled on underlying hardware," pr_warn 903 drivers/target/target_core_configfs.c pr_warn("DIF protection enabled on underlying hardware," pr_warn 908 drivers/target/target_core_configfs.c pr_warn("DIF protection not supported by backend, ignoring\n"); pr_warn 2567 drivers/target/target_core_configfs.c pr_warn("Ran out of lu_gp_show_attr" pr_warn 2974 drivers/target/target_core_configfs.c pr_warn("Ran out of lu_gp_show_attr" pr_warn 483 drivers/target/target_core_device.c pr_warn("Reached dev->dev_port_count ==" pr_warn 570 drivers/target/target_core_file.c pr_warn("FILEIO: blkdev_issue_discard() failed: %d\n", pr_warn 586 drivers/target/target_core_file.c pr_warn("FILEIO: fallocate() failed: %d\n", ret); pr_warn 1543 drivers/target/target_core_pr.c pr_warn("SPC-PR: Received PR OUT parameter list" pr_warn 2076 drivers/target/target_core_pr.c pr_warn("SPC-3 PR: Reservation Key non-zero" pr_warn 2812 drivers/target/target_core_pr.c pr_warn("pr_reg->pr_res_holder still set\n"); pr_warn 3186 drivers/target/target_core_pr.c pr_warn("SPC-3 PR REGISTER_AND_MOVE: Received" pr_warn 3196 drivers/target/target_core_pr.c pr_warn("SPC-3 PR REGISTER_AND_MOVE: Received zero" pr_warn 3387 drivers/target/target_core_pr.c pr_warn("SPC-3 PR REGISTER_AND_MOVE: No reservation" pr_warn 3400 drivers/target/target_core_pr.c pr_warn("SPC-3 PR REGISTER_AND_MOVE: Calling I_T" pr_warn 3417 drivers/target/target_core_pr.c pr_warn("SPC-3 PR REGISTER_AND_MOVE: Unable to move" pr_warn 3576 drivers/target/target_core_pr.c pr_warn("SPC-PR: Received PR OUT parameter list" pr_warn 3636 drivers/target/target_core_pr.c pr_warn("SPC-PR: Received PR OUT illegal parameter" pr_warn 3934 drivers/target/target_core_pr.c pr_warn("SPC-3 PRIN READ_FULL_STATUS ran" pr_warn 296 drivers/target/target_core_sbc.c pr_warn("WRITE_SAME sectors: %u exceeds max_write_same_len: %u\n", pr_warn 312 drivers/target/target_core_sbc.c pr_warn("WRITE SAME with ANCHOR not supported\n"); pr_warn 512 drivers/target/target_core_sbc.c pr_warn("Detected MISCOMPARE for addr: %p buf: %p\n", pr_warn 575 drivers/target/target_core_sbc.c pr_warn("Target/%s: Send MISCOMPARE check condition and sense\n", pr_warn 1159 drivers/target/target_core_sbc.c pr_warn("UNMAP parameter list length %u too small\n", pr_warn 1173 drivers/target/target_core_sbc.c pr_warn("UNMAP parameter list length %u too small, ignoring bd_dl %u\n", pr_warn 1051 drivers/target/target_core_spc.c pr_warn("MODE_SENSE: Invalid subpage code: 0x%02x\n", subpage); pr_warn 165 drivers/target/target_core_tpg.c pr_warn("Queue depth for %s Initiator Node: %s is 0," pr_warn 1514 drivers/target/target_core_transport.c pr_warn("Rejecting SCSI DATA overflow for fabric using" pr_warn 1002 drivers/target/target_core_user.c pr_warn("TCMU: Request of size %zu/%zu is too big for %u/%zu " pr_warn 1151 drivers/target/target_core_user.c pr_warn("TCMU: Userspace set UNKNOWN_OP flag on se_cmd %p\n", pr_warn 1180 drivers/target/target_core_user.c pr_warn("TCMU: data direction was %d!\n", pr_warn 1691 drivers/target/target_core_user.c pr_warn("Failing nl cmd %d on %s. Interface is blocked.\n", cmd, pr_warn 1698 drivers/target/target_core_user.c pr_warn("netlink cmd %d already executing on %s\n", pr_warn 544 drivers/tee/optee/core.c pr_warn("missing \"method\" property\n"); pr_warn 553 drivers/tee/optee/core.c pr_warn("invalid \"method\" property: %s\n", method); pr_warn 572 drivers/tee/optee/core.c pr_warn("api uid mismatch\n"); pr_warn 579 drivers/tee/optee/core.c pr_warn("api revision mismatch\n"); pr_warn 584 drivers/tee/optee/core.c pr_warn("capabilities mismatch\n"); pr_warn 437 drivers/tee/optee/rpc.c pr_warn("Unknown RPC func 0x%x\n", pr_warn 143 drivers/thermal/cpu_cooling.c pr_warn("No cpu device for cpu %d\n", cpu); pr_warn 542 drivers/thermal/cpu_cooling.c pr_warn("No cpu device for cpu %d\n", policy->cpu); pr_warn 601 drivers/thermal/cpu_cooling.c pr_warn("%s: table has duplicate entries\n", __func__); pr_warn 46 drivers/thermal/gov_bang_bang.c pr_warn("Thermal instance %s controlled by bang-bang has unexpected state: %ld\n", pr_warn 108 drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c pr_warn("_TRT package %d is invalid, ignored\n", i); pr_warn 116 drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c pr_warn("Failed to get source ACPI device\n"); pr_warn 120 drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c pr_warn("Failed to get target ACPI device\n"); pr_warn 186 drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c pr_warn("_ART package %d is invalid, ignored", i); pr_warn 196 drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c pr_warn("Failed to get source ACPI device\n"); pr_warn 201 drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c pr_warn("Failed to get target ACPI device\n"); pr_warn 221 drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c pr_warn("Failed to get device name from acpi handle\n"); pr_warn 184 drivers/thermal/intel/int340x_thermal/int3403_thermal.c pr_warn("Invalid PPSS data\n"); pr_warn 71 drivers/thermal/intel/intel_soc_dts_thermal.c pr_warn("intel_soc_dts: Could not get IRQ for GSI %d, err %d\n", pr_warn 88 drivers/thermal/intel/intel_soc_dts_thermal.c pr_warn("request_threaded_irq ret %d\n", err); pr_warn 1620 drivers/thermal/thermal_core.c pr_warn("Thermal: Can not register suspend notifier, return %d\n", pr_warn 322 drivers/tty/ehv_bytechan.c pr_warn("ehv-bc: udbg handle %u is not the stdout handle\n", pr_warn 1564 drivers/tty/hvc/hvcs.c pr_warn("HVCS: Failed to create rescan file (err %d)\n", rc); pr_warn 244 drivers/tty/isicom.c pr_warn("Failed to lock Card (0x%lx)\n", card->base); pr_warn 373 drivers/tty/isicom.c pr_warn("Warning: bad isicom magic for dev %s in %s\n", pr_warn 378 drivers/tty/isicom.c pr_warn("Warning: NULL isicom port for dev %s in %s\n", pr_warn 541 drivers/tty/isicom.c pr_warn("%s(0x%lx): %d(channel) > port_count\n", pr_warn 122 drivers/tty/serial/8250/8250_hp300.c pr_warn("Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); pr_warn 145 drivers/tty/serial/8250/8250_hp300.c pr_warn("Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); pr_warn 151 drivers/tty/serial/8250/8250_hp300.c pr_warn("%s: early_serial_setup() failed.\n", __func__); pr_warn 1316 drivers/tty/serial/8250/8250_pci.c pr_warn("quatech: software control of RS422 features not currently supported.\n"); pr_warn 1322 drivers/tty/serial/8250/8250_port.c pr_warn("%s: detected caps %08x should be %08x\n", pr_warn 2819 drivers/tty/serial/amba-pl011.c pr_warn("could not register SBSA UART platform driver\n"); pr_warn 245 drivers/tty/serial/earlycon.c pr_warn("[%s] bad address\n", match->name); pr_warn 274 drivers/tty/serial/earlycon.c pr_warn("[%s] unsupported reg-io-width\n", match->name); pr_warn 608 drivers/tty/serial/efm32-uart.c pr_warn("efm32-console: fall back to console index %u (from %hhi)\n", pr_warn 618 drivers/tty/serial/efm32-uart.c pr_warn("efm32-console: No port at %d\n", co->index); pr_warn 96 drivers/tty/serial/ifx6x60.c pr_warn("no ifx modem active;\n"); pr_warn 1829 drivers/tty/serial/samsung.c pr_warn("uart: failed to enable baudclk\n"); pr_warn 267 drivers/tty/tty_io.c pr_warn("(%d:%d): %s: NULL tty\n", pr_warn 272 drivers/tty/tty_io.c pr_warn("(%d:%d): %s: bad magic number\n", pr_warn 2499 drivers/tty/tty_io.c pr_warn("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n", pr_warn 2721 drivers/tty/tty_io.c pr_warn("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n", pr_warn 537 drivers/tty/tty_ldisc.c pr_warn("Falling back ldisc for %s.\n", name); pr_warn 953 drivers/tty/vt/keyboard.c pr_warn("keyboard mode must be unicode for braille patterns\n"); pr_warn 1384 drivers/tty/vt/keyboard.c pr_warn("can't emulate rawmode for keycode %d\n", pr_warn 4036 drivers/tty/vt/vt.c pr_warn("Unable to create device for %s; errno = %ld\n", pr_warn 4174 drivers/tty/vt/vt.c pr_warn("Unable to create vt console class; errno = %ld\n", pr_warn 4191 drivers/tty/vt/vt.c pr_warn("Unable to create device for %s; errno = %ld\n", pr_warn 4300 drivers/tty/vt/vt.c pr_warn("unblank_screen: tty %d not allocated ??\n", pr_warn 920 drivers/usb/gadget/function/f_fs.c pr_warn("functionfs read size %d > requested size %zd, splitting request into multiple reads.", pr_warn 945 drivers/usb/gadget/function/f_tcm.c pr_warn(CMD_DIR_MSG, cdb[0]); pr_warn 473 drivers/usb/gadget/function/rndis.c pr_warn("%s: query unknown OID 0x%08X\n", __func__, OID); pr_warn 544 drivers/usb/gadget/function/rndis.c pr_warn("%s: set unknown OID 0x%08X, size %d\n", pr_warn 852 drivers/usb/gadget/function/rndis.c pr_warn("%s: unknown RNDIS message 0x%08X len %d\n", pr_warn 32 drivers/usb/gadget/function/storage_common.h #define LWARN(lun, fmt, args...) _LMSG(pr_warn, lun, fmt, ## args) pr_warn 840 drivers/usb/gadget/function/u_ether.c pr_warn("using random %s ethernet address\n", "self"); pr_warn 842 drivers/usb/gadget/function/u_ether.c pr_warn("using random %s ethernet address\n", "host"); pr_warn 887 drivers/usb/gadget/function/u_ether.c pr_warn("cannot set self ethernet address: %d\n", status); pr_warn 384 drivers/usb/gadget/function/u_serial.c pr_warn("ttyGS%d: unexpected RX status %d\n", pr_warn 470 drivers/usb/gadget/function/u_serial.c pr_warn("%s: unexpected %s status %d\n", pr_warn 927 drivers/usb/gadget/function/u_serial.c pr_warn("%s: unexpected %s status %d\n", pr_warn 174 drivers/usb/gadget/udc/at91_udc.h #define WARNING(stuff...) pr_warn("udc: " stuff) pr_warn 1564 drivers/usb/gadget/udc/atmel_usba_udc.c pr_warn("udc: Invalid packet length %u (expected %zu)\n", pr_warn 553 drivers/usb/gadget/udc/fsl_usb2_udc.h #define WARNING(stuff...) pr_warn("udc: " stuff) pr_warn 637 drivers/usb/gadget/udc/m66592-udc.c pr_warn("m66592-udc: xtal configuration error\n"); pr_warn 649 drivers/usb/gadget/udc/m66592-udc.c pr_warn("m66592-udc: irq trigger config error\n"); pr_warn 191 drivers/usb/gadget/udc/omap_udc.h #define WARNING(stuff...) pr_warn("udc: " stuff) pr_warn 246 drivers/usb/gadget/udc/pxa25x_udc.h #define WARNING(stuff...) pr_warn("udc: " stuff) pr_warn 5705 drivers/usb/host/fotg210-hcd.c pr_warn("Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after\n"); pr_warn 54 drivers/usb/host/fsl-mph-dr-of.c pr_warn("%pOF: Invalid 'dr_mode' property, fallback to host mode\n", pr_warn 151 drivers/usb/host/isp1362-hcd.c pr_warn("%s: invalid PTD $%04x\n", __func__, offset); pr_warn 161 drivers/usb/host/isp1362-hcd.c pr_warn("%s: Bad %s index %d(%d)\n", pr_warn 907 drivers/usb/host/isp1362-hcd.c pr_warn("%s: req %d No more %s PTD buffers available\n", pr_warn 978 drivers/usb/host/isp1362-hcd.c pr_warn("%s: done_map not clear: %08lx:%08lx\n", pr_warn 1438 drivers/usb/host/isp1362-hcd.c pr_warn("%s: No EP in URB %p\n", __func__, urb); pr_warn 1754 drivers/usb/host/isp1362-hcd.c pr_warn("%s: needs reinit!\n", __func__); pr_warn 1757 drivers/usb/host/isp1362-hcd.c pr_warn("%s: already suspended?\n", __func__); pr_warn 1845 drivers/usb/host/isp1362-hcd.c pr_warn("%s: duplicate resume\n", __func__); pr_warn 2469 drivers/usb/host/isp1362-hcd.c pr_warn("%s: memory check with offset %02x ok after second read\n", pr_warn 585 drivers/usb/host/uhci-hcd.h pr_warn("UHCI: Unsupported register 0x%02x on Aspeed\n", reg); pr_warn 356 drivers/usb/host/xhci-dbgtty.c pr_warn("ttyDBC0: unexpected RX status %d\n", pr_warn 394 drivers/usb/host/xhci-dbgtty.c pr_warn("ttyDBC0: RX not scheduled?\n"); pr_warn 200 drivers/usb/isp1760/isp1760-if.c pr_warn("isp1760: IRQ resource not available\n"); pr_warn 740 drivers/usb/misc/legousbtower.c pr_warn("read_buffer overflow, %d bytes dropped\n", pr_warn 819 drivers/usb/phy/phy-fsl-usb.c pr_warn(FSL_OTG_NAME ": unable to register OTG transceiver.\n"); pr_warn 417 drivers/usb/storage/alauda.c pr_warn("alauda_init_media: Unrecognised media signature: %4ph\n", pr_warn 236 drivers/usb/usbip/vudc_rx.c pr_warn("v_rx exit with error %d", ret); pr_warn 232 drivers/usb/usbip/vudc_tx.c pr_warn("v_tx exit with error %d", ret); pr_warn 1660 drivers/vfio/pci/vfio_pci.c pr_warn("invalid id string \"%s\"\n", id); pr_warn 1667 drivers/vfio/pci/vfio_pci.c pr_warn("failed to add dynamic id [%04x:%04x[%04x:%04x]] class %#08x/%08x (%d)\n", pr_warn 1270 drivers/vfio/vfio_iommu_spapr_tce.c pr_warn("tce_vfio: Group %d is already attached\n", pr_warn 1278 drivers/vfio/vfio_iommu_spapr_tce.c pr_warn("tce_vfio: Group %d is incompatible with group %d\n", pr_warn 1342 drivers/vfio/vfio_iommu_spapr_tce.c pr_warn("tce_vfio: detaching unattached group #%u\n", pr_warn 424 drivers/vfio/vfio_iommu_type1.c pr_warn("%s: RLIMIT_MEMLOCK (%ld) exceeded\n", __func__, pr_warn 451 drivers/vfio/vfio_iommu_type1.c pr_warn("%s: RLIMIT_MEMLOCK (%ld) exceeded\n", pr_warn 513 drivers/vfio/vfio_iommu_type1.c pr_warn("%s: Task %s (%d) RLIMIT_MEMLOCK " pr_warn 1786 drivers/vfio/vfio_iommu_type1.c pr_warn("%s: No interrupt remapping support. Use the module param \"allow_unsafe_interrupts\" to enable VFIO IOMMU support on this platform\n", pr_warn 1444 drivers/vhost/scsi.c pr_warn("target_depend_item() failed: %d\n", ret); pr_warn 1527 drivers/vhost/scsi.c pr_warn("tv_tport->tport_name: %s, tpg->tport_tpgt: %hu" pr_warn 685 drivers/video/backlight/backlight.c pr_warn("Unable to create backlight class; errno = %ld\n", pr_warn 327 drivers/video/backlight/lcd.c pr_warn("Unable to create backlight class; errno = %ld\n", pr_warn 2467 drivers/video/fbdev/aty/radeon_base.c pr_warn("%s() Creating sysfs files failed, continuing\n", pr_warn 1909 drivers/video/fbdev/core/fbmem.c pr_warn("Unable to create fb class; errno = %d\n", ret); pr_warn 176 drivers/video/fbdev/efifb.c pr_warn("efifb: Ignoring BGRT: failed to map image memory\n"); pr_warn 238 drivers/video/fbdev/efifb.c pr_warn("efifb: Ignoring BGRT: unexpected or invalid BMP data\n"); pr_warn 435 drivers/video/fbdev/efifb.c pr_warn("efifb: cannot reserve video memory at 0x%lx\n", pr_warn 649 drivers/video/fbdev/pxafb.c pr_warn("%s: timeout disabling overlay1\n", __func__); pr_warn 714 drivers/video/fbdev/pxafb.c pr_warn("%s: timeout disabling overlay2\n", __func__); pr_warn 1191 drivers/video/fbdev/pxafb.c pr_warn("%s: timeout waiting for command done\n", __func__); pr_warn 1437 drivers/video/fbdev/pxafb.c pr_warn("Unable to %s LCD supply regulator: %d\n", pr_warn 35 drivers/video/fbdev/smscufx.c ({ if (status < 0) pr_warn(fmt, ##args); }) pr_warn 38 drivers/video/fbdev/smscufx.c ({ if (status < 0) { pr_warn(fmt, ##args); return status; } }) pr_warn 41 drivers/video/fbdev/smscufx.c ({ if (status < 0) { pr_warn(fmt, ##args); goto error; } }) pr_warn 161 drivers/video/fbdev/smscufx.c pr_warn("Failed to read register index 0x%08x\n", index); pr_warn 188 drivers/video/fbdev/smscufx.c pr_warn("Failed to write register index 0x%08x with value " pr_warn 866 drivers/video/fbdev/smscufx.c pr_warn("ufx_handle_damage unable to get urb"); pr_warn 1402 drivers/video/fbdev/smscufx.c pr_warn("I2C read failed, 0x1100=0x%08x", tmp); pr_warn 1414 drivers/video/fbdev/smscufx.c pr_warn("I2C access timed out, resetting I2C hardware"); pr_warn 1465 drivers/video/fbdev/smscufx.c pr_warn("edid data contains all 0xff"); pr_warn 1911 drivers/video/fbdev/smscufx.c pr_warn("wait for urb interrupted: %x available: %d\n", pr_warn 156 drivers/video/fbdev/uvesafb.c pr_warn("message too long (%d), can't execute task\n", pr_warn 380 drivers/video/fbdev/uvesafb.c pr_warn("VBE get state call failed (eax=0x%x, err=%d)\n", pr_warn 411 drivers/video/fbdev/uvesafb.c pr_warn("VBE state restore call failed (eax=0x%x, err=%d)\n", pr_warn 510 drivers/video/fbdev/uvesafb.c pr_warn("Getting mode info block for mode 0x%x failed (eax=0x%x, err=%d)\n", pr_warn 772 drivers/video/fbdev/uvesafb.c pr_warn("VBE state buffer size cannot be determined (eax=0x%x, err=%d)\n", pr_warn 807 drivers/video/fbdev/uvesafb.c pr_warn("NX protection is active, better not use the PMI\n"); pr_warn 1172 drivers/video/fbdev/uvesafb.c pr_warn("save hardware state failed, error code is %ld!\n", pr_warn 1284 drivers/video/fbdev/uvesafb.c pr_warn("mode switch failed (eax=0x%x, err=%d) - trying again with default timings\n", pr_warn 1855 drivers/video/fbdev/uvesafb.c pr_warn("unrecognized option %s\n", this_opt); pr_warn 1860 drivers/video/fbdev/uvesafb.c pr_warn("uvesafb: mtrr should be set to 0 or 3; %d is unsupported", mtrr); pr_warn 1913 drivers/video/fbdev/uvesafb.c pr_warn("failed to register attributes\n"); pr_warn 394 drivers/video/fbdev/xen-fbfront.c pr_warn("display parameters %d,%d,%d invalid, use defaults\n", pr_warn 59 drivers/virt/vboxguest/vboxguest_utils.c VBG_LOG(vbg_warn, pr_warn); pr_warn 339 drivers/w1/slaves/w1_therm.c pr_warn("Unsupported precision\n"); pr_warn 114 drivers/watchdog/alim7101_wdt.c pr_warn("Heartbeat lost! Will not ping the watchdog\n"); pr_warn 172 drivers/watchdog/ar7_wdt.c pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n"); pr_warn 390 drivers/watchdog/at91sam9_wdt.c pr_warn("I quit now, hardware will probably reboot!\n"); pr_warn 78 drivers/watchdog/bcm47xx_wdt.c pr_warn("timeout value must be 1<=x<=%d, using %d\n", pr_warn 152 drivers/watchdog/bcm47xx_wdt.c pr_warn("timeout value must be 1<=x<=%d, using %d\n", pr_warn 868 drivers/watchdog/f71808e_wdt.c pr_warn("Watchdog timer still running, stopping it\n"); pr_warn 195 drivers/watchdog/iTCO_vendor_support.c pr_warn("Option vendorsupport=%d is no longer supported, " pr_warn 332 drivers/watchdog/it8712f_wdt.c pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n"); pr_warn 335 drivers/watchdog/it8712f_wdt.c pr_warn("Watchdog disable failed\n"); pr_warn 409 drivers/watchdog/it8712f_wdt.c pr_warn("watchdog I/O region busy\n"); pr_warn 323 drivers/watchdog/it87_wdt.c pr_warn("Timeout value out of range, use default %d sec\n", pr_warn 199 drivers/watchdog/m54xx_wdt.c pr_warn("I/O region busy\n"); pr_warn 398 drivers/watchdog/machzwd.c pr_warn("no ZF-Logic found\n"); pr_warn 297 drivers/watchdog/mixcomwd.c pr_warn("I quit now, hardware will probably reboot!\n"); pr_warn 398 drivers/watchdog/pcwd.c pr_warn("Heartbeat lost! Will not ping the watchdog\n"); pr_warn 130 drivers/watchdog/sbc60xxwdt.c pr_warn("Heartbeat lost! Will not ping the watchdog\n"); pr_warn 173 drivers/watchdog/sbc_fitpc2_wdt.c pr_warn("Device closed unexpectedly - timer will not stop\n"); pr_warn 148 drivers/watchdog/sc520_wdt.c pr_warn("Heartbeat lost! Will not ping the watchdog\n"); pr_warn 108 drivers/watchdog/scx200_wdt.c pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n"); pr_warn 227 drivers/watchdog/scx200_wdt.c pr_warn("watchdog I/O region busy\n"); pr_warn 232 drivers/watchdog/w83627hf_wdt.c pr_warn("Stopping previously enabled watchdog until userland kicks in\n"); pr_warn 125 drivers/watchdog/w83877f_wdt.c pr_warn("Heartbeat lost! Will not ping the watchdog\n"); pr_warn 143 drivers/watchdog/watchdog_core.c pr_warn("%s: falling back to default timeout (%u)\n", dev_str, pr_warn 275 drivers/watchdog/watchdog_core.c pr_warn("watchdog%d: Cannot register restart handler (%d)\n", pr_warn 118 drivers/watchdog/wdrtas.c pr_warn("could not get sp_spi watchdog timeout (%li). Continuing\n", pr_warn 190 drivers/watchdog/wdrtas.c pr_warn("reading the thermal sensor failed: %i\n", result); pr_warn 384 drivers/watchdog/wdrtas.c pr_warn("got unexpected close. Watchdog not stopped.\n"); pr_warn 516 drivers/watchdog/wdrtas.c pr_warn("couldn't get token for get-sensor-state. Trying to continue without temperature support.\n"); pr_warn 521 drivers/watchdog/wdrtas.c pr_warn("couldn't get token for ibm,get-system-parameter. Trying to continue with a default timeout value of %i seconds.\n", pr_warn 574 drivers/watchdog/wdrtas.c pr_warn("couldn't register watchdog temperature misc device. Continuing without temperature support.\n"); pr_warn 209 drivers/watchdog/wdt285.c pr_warn("Warning: Watchdog reset may not work on this machine\n"); pr_warn 334 drivers/xen/balloon.c pr_warn("set_phys_to_machine() failed, no memory added\n"); pr_warn 355 drivers/xen/balloon.c pr_warn("Cannot add additional memory (%i)\n", rc); pr_warn 525 drivers/xen/events/events_base.c pr_warn("Failed to obtain physical IRQ %d\n", irq); pr_warn 789 drivers/xen/events/events_base.c pr_warn("unmap irq failed %d\n", rc); pr_warn 1438 drivers/xen/events/events_base.c pr_warn("xen map irq failed gsi=%d irq=%d pirq=%d rc=%d\n", pr_warn 319 drivers/xen/events/events_fifo.c pr_warn("Dropping pending event for port %u\n", port); pr_warn 1091 drivers/xen/gntdev.c pr_warn("Huh? Other mm?\n"); pr_warn 1127 drivers/xen/gntdev.c pr_warn("find_grant_ptes() failure.\n"); pr_warn 352 drivers/xen/grant-table.c pr_warn("WARNING: g.e. %#x still in use!\n", ref); pr_warn 743 drivers/xen/grant-table.c pr_warn("Failed to ioremap gnttab share frames (addr=%pa)!\n", pr_warn 1256 drivers/xen/grant-table.c pr_warn("grant table add_to_physmap failed, err=%d\n", pr_warn 1366 drivers/xen/grant-table.c pr_warn("gnttab share frames is not mapped!\n"); pr_warn 230 drivers/xen/mcelog.c pr_warn("Failed to find global error info\n"); pr_warn 244 drivers/xen/mcelog.c pr_warn("Failed to match cpu with apicid %d\n", m.apicid); pr_warn 256 drivers/xen/mcelog.c pr_warn("Fail to find bank error info\n"); pr_warn 307 drivers/xen/mcelog.c pr_warn("Failed to convert this error log, continue acking it anyway\n"); pr_warn 248 drivers/xen/pci.c pr_warn("Failed to report MMCONFIG reservation" pr_warn 259 drivers/xen/pcpu.c pr_warn("Failed to register pcpu%u\n", info->xen_cpuid); pr_warn 394 drivers/xen/pcpu.c pr_warn("Failed to bind pcpu virq\n"); pr_warn 400 drivers/xen/pcpu.c pr_warn("Failed to register pcpu subsys\n"); pr_warn 406 drivers/xen/pcpu.c pr_warn("Failed to sync pcpu info\n"); pr_warn 432 drivers/xen/privcmd.c pr_warn("%s Could not alloc %d pfns rc:%d\n", __func__, pr_warn 327 drivers/xen/pvcalls-back.c pr_warn("%s frontend requested ring_order %u, which is > MAX (%u)\n", pr_warn 1025 drivers/xen/pvcalls-back.c pr_warn("%s cannot create xenstore transaction\n", __func__); pr_warn 1032 drivers/xen/pvcalls-back.c pr_warn("%s write out 'versions' failed\n", __func__); pr_warn 1039 drivers/xen/pvcalls-back.c pr_warn("%s write out 'max-page-order' failed\n", __func__); pr_warn 1046 drivers/xen/pvcalls-back.c pr_warn("%s write out 'function-calls' failed\n", __func__); pr_warn 1056 drivers/xen/pvcalls-back.c pr_warn("%s cannot complete xenstore transaction\n", __func__); pr_warn 217 drivers/xen/swiotlb-xen.c pr_warn("Warning: only able to allocate %ld MB for software IO TLB\n", pr_warn 100 drivers/xen/time.c pr_warn("%s: failed to allocate runstate_delta\n", pr_warn 115 drivers/xen/time.c pr_warn("%s: cannot accumulate runstate time as runstate_delta is NULL\n", pr_warn 170 drivers/xen/xen-acpi-memhotplug.c pr_warn(PREFIX "ACPI namespace scan failed\n"); pr_warn 177 drivers/xen/xen-acpi-memhotplug.c pr_warn(PREFIX "Missing device object\n"); pr_warn 436 drivers/xen/xen-acpi-memhotplug.c pr_warn(PREFIX "walk_namespace failed\n"); pr_warn 458 drivers/xen/xen-acpi-memhotplug.c pr_warn(PREFIX "walk_namespace failed\n"); pr_warn 105 drivers/xen/xen-acpi-pad.c pr_warn("Unsupported event [0x%x]\n", event); pr_warn 233 drivers/xen/xen-acpi-processor.c pr_warn("ACPI CPU%u missing some P-state data (%x), skipping\n", pr_warn 259 drivers/xen/xen-acpi-processor.c pr_warn("(_PXX): Hypervisor error (%d) for ACPI CPU%u\n", pr_warn 107 drivers/xen/xen-pciback/conf_space_header.c pr_warn("%s: cannot enable memory-write-invalidate (%d)\n", pr_warn 141 drivers/xen/xen-pciback/conf_space_header.c pr_warn(DRV_NAME ": driver data not found for %s\n", pr_warn 178 drivers/xen/xen-pciback/conf_space_header.c pr_warn(DRV_NAME ": driver data not found for %s\n", pr_warn 212 drivers/xen/xen-pciback/conf_space_header.c pr_warn(DRV_NAME ": driver data not found for %s\n", pr_warn 627 drivers/xen/xen-pciback/pci_stub.c pr_warn("****** removing device %s while still in-use by domain %d! ******\n", pr_warn 629 drivers/xen/xen-pciback/pci_stub.c pr_warn("****** driver domain may still access this device's i/o resources!\n"); pr_warn 630 drivers/xen/xen-pciback/pci_stub.c pr_warn("****** shutdown driver domain before binding device\n"); pr_warn 631 drivers/xen/xen-pciback/pci_stub.c pr_warn("****** to other drivers or domains\n"); pr_warn 740 drivers/xen/xen-scsiback.c pr_warn("Dom%d provided bogus ring requests (%#x - %#x = %u). Halting ring processing\n", pr_warn 957 drivers/xen/xen-scsiback.c pr_warn("Virtual ID is already used. Assignment was not performed.\n"); pr_warn 1275 drivers/xen/xen-scsiback.c pr_warn("%s failed\n", __func__); pr_warn 455 drivers/xen/xenbus/xenbus_comms.c pr_warn("response ring is not quiescent (%08x:%08x): fixing up\n", pr_warn 609 drivers/xen/xenbus/xenbus_probe.c pr_warn("suspend %s failed: %i\n", dev_name(dev), err); pr_warn 628 drivers/xen/xenbus/xenbus_probe.c pr_warn("resume (talk_to_otherend) %s failed: %i\n", pr_warn 638 drivers/xen/xenbus/xenbus_probe.c pr_warn("resume %s failed: %i\n", dev_name(dev), err); pr_warn 645 drivers/xen/xenbus/xenbus_probe.c pr_warn("resume (watch_otherend) %s failed: %d.\n", pr_warn 756 drivers/xen/xenbus/xenbus_probe.c pr_warn("Cannot update xenstore event channel: %d\n", pr_warn 816 drivers/xen/xenbus/xenbus_probe.c pr_warn("Xenstore state unknown\n"); pr_warn 823 drivers/xen/xenbus/xenbus_probe.c pr_warn("Error initializing xenstore comms: %i\n", err); pr_warn 40 drivers/xen/xenbus/xenbus_probe_frontend.c pr_warn("bad frontend %s\n", nodename); pr_warn 46 drivers/xen/xenbus/xenbus_probe_frontend.c pr_warn("bus_id %s no slash\n", bus_id); pr_warn 246 drivers/xen/xenbus/xenbus_probe_frontend.c pr_warn("Timeout connecting to device: %s (local state %d, remote state %d)\n", pr_warn 261 drivers/xen/xenbus/xenbus_probe_frontend.c pr_warn("Waiting for devices to initialise: "); pr_warn 160 drivers/xen/xenbus/xenbus_xs.c pr_warn("xen store gave: unknown error %s\n", pr_warn 756 drivers/xen/xenbus/xenbus_xs.c pr_warn("xs_reset_watches failed: %d\n", err); pr_warn 806 drivers/xen/xenbus/xenbus_xs.c pr_warn("Failed to release watch %s: %i\n", watch->node, err); pr_warn 237 drivers/xen/xlate_mmu.c pr_warn("%s Couldn't balloon alloc %ld pages rc:%d\n", __func__, pr_warn 250 drivers/xen/xlate_mmu.c pr_warn("%s Couldn't map %ld pages rc:%d\n", __func__, pr_warn 359 fs/9p/vfs_inode.c pr_warn("%s (%d): Problem allocating inode\n", pr_warn 456 fs/affs/amigaffs.c pr_warn("Remounting filesystem read-only\n"); pr_warn 470 fs/affs/amigaffs.c pr_warn("(device %s): %s(): %pV\n", sb->s_id, function, &vaf); pr_warn 289 fs/affs/bitmap.c pr_warn("Bitmap %u invalid - mounting %s read only.\n", pr_warn 221 fs/affs/super.c pr_warn("Invalid blocksize (512, 1024, 2048, 4096 allowed)\n"); pr_warn 287 fs/affs/super.c pr_warn("Unrecognized mount option \"%s\" or missing value\n", pr_warn 175 fs/afs/dir.c pr_warn("DIR %llx:%llx f=%llx l=%llx al=%llx r=%llx\n", pr_warn 178 fs/afs/dir.c pr_warn("DIR %llx %x %x %x\n", pr_warn 186 fs/afs/dir.c pr_warn("[%02x] %32phN\n", i * qty + j, block); pr_warn 85 fs/afs/fsclient.c pr_warn("Unknown AFSFetchStatus version %u\n", ntohl(xdr->if_version)); pr_warn 37 fs/afs/inode.c pr_warn("kAFS: AFS vnode with undefined type %u\n", pr_warn 39 fs/afs/inode.c pr_warn("kAFS: A=%d m=%o s=%llx v=%llx\n", pr_warn 44 fs/afs/inode.c pr_warn("kAFS: vnode %llx:%llx:%x\n", pr_warn 49 fs/afs/inode.c pr_warn("kAFS: dir %llx:%llx:%x\n", pr_warn 216 fs/afs/inode.c pr_warn("kAFS: vnode modified {%llx:%llu} %llx->%llx %s\n", pr_warn 365 fs/afs/super.c pr_warn("kAFS: Can only specify source 'none' with -o dyn\n"); pr_warn 370 fs/afs/super.c pr_warn("kAFS: No cell specified\n"); pr_warn 60 fs/autofs/dev-ioctl.c pr_warn("ioctl control interface version mismatch: " pr_warn 115 fs/autofs/dev-ioctl.c pr_warn("invalid device control module version " pr_warn 123 fs/autofs/dev-ioctl.c pr_warn( pr_warn 131 fs/autofs/dev-ioctl.c pr_warn("invalid path supplied for cmd(0x%08x)\n", pr_warn 359 fs/autofs/dev-ioctl.c pr_warn("not allowed to change PID namespace\n"); pr_warn 625 fs/autofs/dev-ioctl.c pr_warn("unknown command 0x%08x\n", command); pr_warn 154 fs/autofs/waitq.c pr_warn("bad type %d!\n", type); pr_warn 50 fs/befs/debug.c pr_warn("(%s): %pV\n", sb->s_id, &vaf); pr_warn 111 fs/binfmt_flat.c pr_warn("Process %s:%d received signr %d and should have core dumped\n", pr_warn 861 fs/btrfs/compression.c pr_warn( pr_warn 958 fs/btrfs/compression.c pr_warn("BTRFS: no compression workspaces, low memory, retrying\n"); pr_warn 3742 fs/btrfs/disk-io.c pr_warn("BTRFS: unknown raid flag: %llu", flags); pr_warn 427 fs/btrfs/lzo.c pr_warn("BTRFS: decompress failed\n"); pr_warn 478 fs/btrfs/lzo.c pr_warn("BTRFS: decompress failed!\n"); pr_warn 132 fs/btrfs/print-tree.c pr_warn("BTRFS: uuid item with illegal size %lu!\n", pr_warn 996 fs/btrfs/super.c pr_warn("BTRFS: 'subvolrootid' mount option is deprecated and has no effect\n"); pr_warn 130 fs/btrfs/sysfs.c pr_warn("btrfs: sysfs: unknown feature set %d\n", pr_warn 1007 fs/btrfs/sysfs.c pr_warn("BTRFS: Sending event '%d' to kobject: '%s' (%p): failed\n", pr_warn 116 fs/btrfs/zlib.c pr_warn("BTRFS: deflateInit failed\n"); pr_warn 267 fs/btrfs/zlib.c pr_warn("BTRFS: inflateInit failed\n"); pr_warn 357 fs/btrfs/zlib.c pr_warn("BTRFS: inflateInit failed\n"); pr_warn 189 fs/btrfs/zstd.c pr_warn( pr_warn 400 fs/btrfs/zstd.c pr_warn("BTRFS: ZSTD_initCStream failed\n"); pr_warn 645 fs/btrfs/zstd.c pr_warn("BTRFS: ZSTD_initDStream failed\n"); pr_warn 151 fs/cachefiles/interface.c pr_warn("Lookup failed error %d\n", ret); pr_warn 273 fs/ceph/caps.c pr_warn("reserve caps ctx=%p ENOMEM need=%d got=%d\n", pr_warn 1624 fs/ceph/caps.c pr_warn("__mark_dirty_caps %p %llx mask %s, " pr_warn 994 fs/ceph/inode.c pr_warn("mds issued no caps on %llx.%llx\n", pr_warn 2828 fs/ceph/mds_client.c pr_warn("got a dup %s reply on %llu from mds%d\n", pr_warn 2834 fs/ceph/mds_client.c pr_warn("got unsafe after safe on %llu from mds%d\n", pr_warn 4627 fs/ceph/mds_client.c pr_warn("mds%d closed our session\n", s->s_mds); pr_warn 64 fs/ceph/quota.c pr_warn("Failed to find inode %llu\n", vino.ino); pr_warn 111 fs/ceph/quota.c pr_warn("Failed to alloc quotarealms_inode\n"); pr_warn 385 fs/ceph/quota.c pr_warn("Invalid quota check op (%d)\n", op); pr_warn 1949 fs/cifs/connect.c pr_warn("CIFS: Mount option noac not supported. Instead set /proc/fs/cifs/LookupCacheEnabled to 0\n"); pr_warn 2181 fs/cifs/connect.c pr_warn("CIFS: username too long\n"); pr_warn 2247 fs/cifs/connect.c pr_warn("CIFS: no memory for password\n"); pr_warn 2283 fs/cifs/connect.c pr_warn("CIFS: domain name too long\n"); pr_warn 2290 fs/cifs/connect.c pr_warn("CIFS: no memory for domainname\n"); pr_warn 2303 fs/cifs/connect.c pr_warn("CIFS: Could not parse srcaddr: %s\n", pr_warn 2314 fs/cifs/connect.c pr_warn("CIFS: iocharset name too long.\n"); pr_warn 2323 fs/cifs/connect.c pr_warn("CIFS: no memory for charset\n"); pr_warn 2354 fs/cifs/connect.c pr_warn("CIFS: netbiosname longer than 15 truncated.\n"); pr_warn 2380 fs/cifs/connect.c pr_warn("CIFS: server netbiosname longer than 15 truncated.\n"); pr_warn 2391 fs/cifs/connect.c pr_warn("Bad mount helper ver=%s. Did " pr_warn 2401 fs/cifs/connect.c pr_warn("CIFS: Invalid mount helper version specified\n"); pr_warn 2499 fs/cifs/connect.c pr_warn("No dialect specified on mount. Default has changed to " pr_warn 2509 fs/cifs/connect.c pr_warn("Could not allocate temporary buffer\n"); pr_warn 105 fs/coda/cnode.c pr_warn("%s: coda_iget failed\n", __func__); pr_warn 544 fs/coda/dir.c pr_warn("inode %ld, fid %s changed type!\n", pr_warn 115 fs/coda/inode.c pr_warn("%s: Bad mount data\n", __func__); pr_warn 120 fs/coda/inode.c pr_warn("%s: Bad mount version\n", __func__); pr_warn 137 fs/coda/inode.c pr_warn("%s: Bad minor number\n", __func__); pr_warn 143 fs/coda/inode.c pr_warn("%s: Bad file\n", __func__); pr_warn 170 fs/coda/inode.c pr_warn("%s: No pseudo device\n", __func__); pr_warn 176 fs/coda/inode.c pr_warn("%s: Device already mounted\n", __func__); pr_warn 202 fs/coda/inode.c pr_warn("%s: coda_get_rootfid failed with %d\n", pr_warn 212 fs/coda/inode.c pr_warn("Failure of coda_cnode_make for root: error %d\n", pr_warn 115 fs/coda/psdev.c pr_warn("coda_downcall opc %d uniq %d, not enough!\n", pr_warn 121 fs/coda/psdev.c pr_warn("downcall opc %d, uniq %d, too much!", pr_warn 141 fs/coda/psdev.c pr_warn("%s: coda_downcall error: %d\n", pr_warn 163 fs/coda/psdev.c pr_warn("%s: msg (%d, %d) not found\n", pr_warn 171 fs/coda/psdev.c pr_warn("%s: too much cnt: %d, cnt: %ld, opc: %d, uniq: %d.\n", pr_warn 250 fs/coda/psdev.c pr_warn("%s: Venus read %ld bytes of %d in message\n", pr_warn 315 fs/coda/psdev.c pr_warn("%s: Not open.\n", __func__); pr_warn 403 fs/coda/psdev.c pr_warn("Problem (%d) in init_coda_psdev\n", status); pr_warn 409 fs/coda/psdev.c pr_warn("failed to register filesystem!\n"); pr_warn 431 fs/coda/psdev.c pr_warn("failed to unregister filesystem\n"); pr_warn 521 fs/coda/upcall.c pr_warn("%s: Venus returns: %d for %s\n", pr_warn 775 fs/coda/upcall.c pr_warn("Unexpected interruption.\n"); pr_warn 30 fs/efs/dir.c pr_warn("%s(): directory size not a multiple of EFS_DIRBSIZE\n", pr_warn 85 fs/efs/dir.c pr_warn("directory entry %d exceeds directory block\n", pr_warn 26 fs/efs/file.c pr_warn("%s(): block %d >= %ld (filesize %ld)\n", pr_warn 40 fs/efs/file.c pr_warn("%s(): block < 0\n", __func__); pr_warn 50 fs/efs/file.c pr_warn("%s(): block %d >= %ld (filesize %ld)\n", pr_warn 93 fs/efs/inode.c pr_warn("%s() failed at block %d\n", __func__, block); pr_warn 134 fs/efs/inode.c pr_warn("extent %d has bad magic number in inode %lu\n", pr_warn 164 fs/efs/inode.c pr_warn("unsupported inode mode %o\n", inode->i_mode); pr_warn 173 fs/efs/inode.c pr_warn("failed to read inode %lu\n", inode->i_ino); pr_warn 28 fs/efs/namei.c pr_warn("%s(): directory size not a multiple of EFS_DIRBSIZE\n", pr_warn 177 fs/efs/super.c pr_warn("SGI disklabel: checksum bad, label corrupted\n"); pr_warn 298 fs/efs/super.c pr_warn("invalid superblock at block %u\n", pr_warn 503 fs/ext4/extents_status.c pr_warn("ES assertion failed when merging extents. " pr_warn 610 fs/ext4/extents_status.c pr_warn("ES insert assertion failed for " pr_warn 629 fs/ext4/extents_status.c pr_warn("ES insert assertion failed for inode: %lu " pr_warn 639 fs/ext4/extents_status.c pr_warn("ES insert assertion failed for inode: %lu " pr_warn 652 fs/ext4/extents_status.c pr_warn("ES insert assertion failed for inode: %lu " pr_warn 688 fs/ext4/extents_status.c pr_warn("ES insert assertion failed for inode: %lu " pr_warn 696 fs/ext4/extents_status.c pr_warn("ES insert assertion failed for " pr_warn 702 fs/ext4/extents_status.c pr_warn("ES insert assertion failed for " pr_warn 718 fs/ext4/extents_status.c pr_warn("ES insert assertion failed for inode: %lu " pr_warn 624 fs/fs_context.c pr_warn("VFS: Can't mix monolithic and individual options\n"); pr_warn 322 fs/fs_parser.c pr_warn("VALIDATE C-TBL: Empty\n"); pr_warn 1180 fs/fscache/page.c pr_warn("Cookie type %s marked page %lx multiple times\n", pr_warn 285 fs/fuse/cuse.c pr_warn("unknown device info \"%s\"\n", key); pr_warn 775 fs/fuse/dev.c pr_warn("trying to steal weird page\n"); pr_warn 776 fs/fuse/dev.c pr_warn(" page=%p index=%li flags=%08lx, count=%i, mapcount=%i, mapping=%p\n", page, page->index, page->flags, page_count(page), page_mapcount(page), page->mapping); pr_warn 676 fs/fuse/virtio_fs.c pr_warn("virtio-fs: suspend/resume not yet supported\n"); pr_warn 168 fs/gfs2/ops_fstype.c pr_warn("not a GFS2 filesystem\n"); pr_warn 190 fs/gfs2/ops_fstype.c pr_warn("error %d reading superblock\n", bio->bi_status); pr_warn 1052 fs/gfs2/ops_fstype.c pr_warn("can't alloc struct gfs2_sbd\n"); pr_warn 1587 fs/gfs2/ops_fstype.c pr_warn("path_lookup on %s returned error %d\n", pr_warn 1596 fs/gfs2/ops_fstype.c pr_warn("gfs2 mount does not exist\n"); pr_warn 22 fs/gfs2/util.h pr_warn("fsid=%s: " fmt, (fs)->sd_fsname, ##__VA_ARGS__) pr_warn 165 fs/hfs/mdb.c pr_warn("unable to locate alternate MDB\n"); pr_warn 166 fs/hfs/mdb.c pr_warn("continuing without an alternate MDB\n"); pr_warn 206 fs/hfs/mdb.c pr_warn("filesystem was not cleanly unmounted, running fsck.hfs is recommended. mounting read-only.\n"); pr_warn 210 fs/hfs/mdb.c pr_warn("filesystem is marked locked, mounting read-only.\n"); pr_warn 122 fs/hfs/super.c pr_warn("filesystem was not cleanly unmounted, running fsck.hfs is recommended. leaving read-only.\n"); pr_warn 126 fs/hfs/super.c pr_warn("filesystem is marked locked, leaving read-only.\n"); pr_warn 410 fs/hfs/super.c pr_warn("can't find a HFS filesystem on dev %s\n", pr_warn 343 fs/hfsplus/super.c pr_warn("filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. leaving read-only.\n"); pr_warn 350 fs/hfsplus/super.c pr_warn("filesystem is marked locked, leaving read-only.\n"); pr_warn 355 fs/hfsplus/super.c pr_warn("filesystem is marked journaled, leaving read-only.\n"); pr_warn 416 fs/hfsplus/super.c pr_warn("unable to find HFS+ superblock\n"); pr_warn 458 fs/hfsplus/super.c pr_warn("Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only.\n"); pr_warn 463 fs/hfsplus/super.c pr_warn("Filesystem is marked locked, mounting read-only.\n"); pr_warn 467 fs/hfsplus/super.c pr_warn("write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.\n"); pr_warn 226 fs/hfsplus/wrapper.c pr_warn("invalid secondary volume header\n"); pr_warn 47 fs/jffs2/background.c pr_warn("fork failed for JFFS2 garbage collect thread: %ld\n", pr_warn 84 fs/jffs2/compr.c pr_warn("No memory for compressor allocation. Compression failed.\n"); pr_warn 193 fs/jffs2/compr.c pr_warn("No memory for compressor allocation. (%d bytes)\n", pr_warn 283 fs/jffs2/compr.c pr_warn("Decompressor \"%s\" returned %d\n", pr_warn 294 fs/jffs2/compr.c pr_warn("compression type 0x%02x not available\n", comprtype); pr_warn 306 fs/jffs2/compr.c pr_warn("NULL compressor name at registering JFFS2 compressor. Failed.\n"); pr_warn 347 fs/jffs2/compr.c pr_warn("Compressor module is in use. Unregister failed.\n"); pr_warn 84 fs/jffs2/compr_zlib.c pr_warn("deflateInit failed\n"); pr_warn 175 fs/jffs2/compr_zlib.c pr_warn("inflateInit failed\n"); pr_warn 269 fs/jffs2/debug.c pr_warn("%s_size mismatch counted 0x%x, c->%s_size 0x%x\n", \ pr_warn 286 fs/jffs2/debug.c pr_warn("%s counted only 0x%x blocks of 0x%x. Where are the others?\n", pr_warn 83 fs/jffs2/debug.h pr_warn("warning: (%d) %s: " fmt, \ pr_warn 111 fs/jffs2/dir.c pr_warn("iget() failed for ino #%u\n", ino); pr_warn 352 fs/jffs2/dir.c pr_warn("Can't allocate %d bytes of memory\n", targetlen + 1); pr_warn 48 fs/jffs2/erase.c pr_warn("kmalloc for struct erase_info in jffs2_erase_block failed. Refiling block for later\n"); pr_warn 92 fs/jffs2/erase.c pr_warn("Erase at 0x%08x failed immediately: -EROFS. Is the sector locked?\n", pr_warn 95 fs/jffs2/erase.c pr_warn("Erase at 0x%08x failed immediately: errno %d\n", pr_warn 343 fs/jffs2/erase.c pr_warn("Newly-erased block contained word 0x%lx at offset 0x%08tx\n", pr_warn 354 fs/jffs2/erase.c pr_warn("Failed to allocate page buffer for verifying erase at 0x%08x. Refiling\n", pr_warn 369 fs/jffs2/erase.c pr_warn("Read of newly-erased block at 0x%08x failed: %d. Putting on bad_list\n", pr_warn 375 fs/jffs2/erase.c pr_warn("Short read from newly-erased block at 0x%08x. Wanted %d, got %zd\n", pr_warn 385 fs/jffs2/erase.c pr_warn("Newly-erased block contained word 0x%lx at offset 0x%08x\n", pr_warn 441 fs/jffs2/erase.c pr_warn("Write clean marker to block at 0x%08x failed: %d\n", pr_warn 444 fs/jffs2/erase.c pr_warn("Short write to newly-erased block at 0x%08x: Wanted %zd, got %zd\n", pr_warn 353 fs/jffs2/fs.c pr_warn("%s(): Bogus i_mode %o for ino %lu\n", pr_warn 102 fs/jffs2/gc.c pr_warn("Eep. ret->gc_node for block at 0x%08x is NULL\n", pr_warn 206 fs/jffs2/gc.c pr_warn("Inode #%u is in state %d during CRC check phase!\n", pr_warn 239 fs/jffs2/gc.c pr_warn("Returned error for crccheck of ino #%u. Expect badness...\n", pr_warn 298 fs/jffs2/gc.c pr_warn("eep. End of raw list while still supposedly nodes to GC\n"); pr_warn 299 fs/jffs2/gc.c pr_warn("erase block at 0x%08x. free_size 0x%08x, dirty_size 0x%08x, used_size 0x%08x\n", pr_warn 576 fs/jffs2/gc.c pr_warn("Raw node at 0x%08x wasn't in node lists for ino #%u\n", pr_warn 579 fs/jffs2/gc.c pr_warn("But it's obsolete so we don't mind too much\n"); pr_warn 636 fs/jffs2/gc.c pr_warn("Header CRC failed on REF_PRISTINE node at 0x%08x: Read 0x%08x, calculated 0x%08x\n", pr_warn 645 fs/jffs2/gc.c pr_warn("Node CRC failed on REF_PRISTINE data node at 0x%08x: Read 0x%08x, calculated 0x%08x\n", pr_warn 654 fs/jffs2/gc.c pr_warn("Data CRC failed on REF_PRISTINE data node at 0x%08x: Read 0x%08x, calculated 0x%08x\n", pr_warn 665 fs/jffs2/gc.c pr_warn("Node CRC failed on REF_PRISTINE dirent node at 0x%08x: Read 0x%08x, calculated 0x%08x\n", pr_warn 672 fs/jffs2/gc.c pr_warn("Name in dirent node at 0x%08x contains zeroes\n", pr_warn 680 fs/jffs2/gc.c pr_warn("Name CRC failed on REF_PRISTINE dirent node at 0x%08x: Read 0x%08x, calculated 0x%08x\n", pr_warn 690 fs/jffs2/gc.c pr_warn("Unknown node type for REF_PRISTINE node at 0x%08x: 0x%04x\n", pr_warn 781 fs/jffs2/gc.c pr_warn("kmalloc of mdata failed in jffs2_garbage_collect_metadata()\n"); pr_warn 786 fs/jffs2/gc.c pr_warn("read of old metadata failed in jffs2_garbage_collect_metadata(): %d\n", pr_warn 799 fs/jffs2/gc.c pr_warn("jffs2_reserve_space_gc of %zd bytes for garbage_collect_metadata failed: %d\n", pr_warn 837 fs/jffs2/gc.c pr_warn("Error writing new dnode: %ld\n", PTR_ERR(new_fn)); pr_warn 880 fs/jffs2/gc.c pr_warn("jffs2_reserve_space_gc of %zd bytes for garbage_collect_dirent failed: %d\n", pr_warn 887 fs/jffs2/gc.c pr_warn("jffs2_write_dirent in garbage_collect_dirent failed: %ld\n", pr_warn 948 fs/jffs2/gc.c pr_warn("%s(): Read error (%d) reading obsolete node at %08x\n", pr_warn 954 fs/jffs2/gc.c pr_warn("%s(): Short read (%zd not %u) reading header from obsolete node at %08x\n", pr_warn 1005 fs/jffs2/gc.c pr_warn("Deletion dirent \"%s\" not found in list for ino #%u\n", pr_warn 1035 fs/jffs2/gc.c pr_warn("Node read failed in jffs2_garbage_collect_hole. Ret %d, retlen %zd. Data will be lost by writing new hole node\n", pr_warn 1040 fs/jffs2/gc.c pr_warn("%s(): Node at 0x%08x had node type 0x%04x instead of JFFS2_NODETYPE_INODE(0x%04x)\n", pr_warn 1046 fs/jffs2/gc.c pr_warn("%s(): Node at 0x%08x had totlen 0x%x instead of expected 0x%zx\n", pr_warn 1053 fs/jffs2/gc.c pr_warn("%s: Node at 0x%08x had CRC 0x%08x which doesn't match calculated CRC 0x%08x\n", pr_warn 1057 fs/jffs2/gc.c pr_warn("Data in the range 0x%08x to 0x%08x of inode #%u will be lost\n", pr_warn 1062 fs/jffs2/gc.c pr_warn("%s(): Node 0x%08x wasn't a hole node!\n", pr_warn 1064 fs/jffs2/gc.c pr_warn("Data in the range 0x%08x to 0x%08x of inode #%u will be lost\n", pr_warn 1104 fs/jffs2/gc.c pr_warn("jffs2_reserve_space_gc of %zd bytes for garbage_collect_hole failed: %d\n", pr_warn 1111 fs/jffs2/gc.c pr_warn("Error writing new hole node: %ld\n", PTR_ERR(new_fn)); pr_warn 1131 fs/jffs2/gc.c pr_warn("%s(): Replacing fn with %d frag(s) but new ver %d != highest_version %d of ino #%d\n", pr_warn 1150 fs/jffs2/gc.c pr_warn("%s(): Old node still has frags!\n", __func__); pr_warn 1154 fs/jffs2/gc.c pr_warn("%s(): New node has no frags!\n", __func__); pr_warn 1332 fs/jffs2/gc.c pr_warn("read_cache_page() returned error: %ld\n", pr_warn 1351 fs/jffs2/gc.c pr_warn("jffs2_reserve_space_gc of %zd bytes for garbage_collect_dnode failed: %d\n", pr_warn 1389 fs/jffs2/gc.c pr_warn("Error writing new dnode: %ld\n", pr_warn 460 fs/jffs2/nodemgmt.c pr_warn("Eep. Block 0x%08x taken from free_list had free_size of 0x%08x!!\n", pr_warn 517 fs/jffs2/nodemgmt.c pr_warn("argh. node added in wrong place at 0x%08x(%d)\n", pr_warn 520 fs/jffs2/nodemgmt.c pr_warn("nextblock 0x%08x", c->nextblock->offset); pr_warn 522 fs/jffs2/nodemgmt.c pr_warn("No nextblock"); pr_warn 760 fs/jffs2/nodemgmt.c pr_warn("Read error reading from obsoleted node at 0x%08x: %d\n", pr_warn 765 fs/jffs2/nodemgmt.c pr_warn("Short read from obsoleted node at 0x%08x: %zd\n", pr_warn 770 fs/jffs2/nodemgmt.c pr_warn("Node totlen on flash (0x%08x) != totlen from node ref (0x%08x)\n", pr_warn 783 fs/jffs2/nodemgmt.c pr_warn("Write error in obliterating obsoleted node at 0x%08x: %d\n", pr_warn 788 fs/jffs2/nodemgmt.c pr_warn("Short write in obliterating obsoleted node at 0x%08x: %zd\n", pr_warn 41 fs/jffs2/read.c pr_warn("Error reading node from 0x%08x: %d\n", pr_warn 47 fs/jffs2/read.c pr_warn("Short read from 0x%08x: wanted 0x%zx bytes, got 0x%zx\n", pr_warn 58 fs/jffs2/read.c pr_warn("Node CRC %08x != calculated CRC %08x for node at %08x\n", pr_warn 72 fs/jffs2/read.c pr_warn("jffs2_read_dnode() asked for %d bytes at %d from %d-byte node\n", pr_warn 125 fs/jffs2/read.c pr_warn("Data CRC %08x != calculated CRC %08x for node at %08x\n", pr_warn 137 fs/jffs2/read.c pr_warn("Error: jffs2_decompress returned %d\n", ret); pr_warn 237 fs/jffs2/scan.c pr_warn("%s(): unknown block state\n", __func__); pr_warn 624 fs/jffs2/scan.c pr_warn("Eep. ofs 0x%08x not word-aligned!\n", ofs); pr_warn 629 fs/jffs2/scan.c pr_warn("ofs 0x%08x has already been seen. Skipping\n", pr_warn 674 fs/jffs2/scan.c pr_warn("Empty flash at 0x%08x ends at 0x%08x\n", pr_warn 722 fs/jffs2/scan.c pr_warn("Magic bitmask is backwards at offset 0x%08x. Wrong endian filesystem?\n", pr_warn 737 fs/jffs2/scan.c pr_warn("Old JFFS2 bitmask found at 0x%08x\n", ofs); pr_warn 738 fs/jffs2/scan.c pr_warn("You cannot use older JFFS2 filesystems with newer kernels\n"); pr_warn 777 fs/jffs2/scan.c pr_warn("Node at 0x%08x with length 0x%08x would run over the end of the erase block\n", pr_warn 779 fs/jffs2/scan.c pr_warn("Perhaps the file system was created with the wrong erase size?\n"); pr_warn 239 fs/jffs2/wbuf.c pr_warn("%s(): Read back of page at %08x failed: %d\n", pr_warn 243 fs/jffs2/wbuf.c pr_warn("%s(): Read back of page at %08x gave short read: %zd not %d\n", pr_warn 257 fs/jffs2/wbuf.c pr_warn("Write verify error (ECC %s) at %08x. Wrote:\n", pr_warn 262 fs/jffs2/wbuf.c pr_warn("Read back:\n"); pr_warn 391 fs/jffs2/wbuf.c pr_warn("Failed to allocate space for wbuf recovery. Data loss ensues.\n"); pr_warn 401 fs/jffs2/wbuf.c pr_warn("Failed to allocate node refs for wbuf recovery. Data loss ensues.\n"); pr_warn 642 fs/jffs2/wbuf.c pr_warn("jffs2_flush_wbuf(): Write failed with %d\n", ret); pr_warn 645 fs/jffs2/wbuf.c pr_warn("jffs2_flush_wbuf(): Write was short: %zd instead of %d\n", pr_warn 971 fs/jffs2/wbuf.c pr_warn("mtd->read(0x%zx bytes from 0x%llx) returned ECC error\n", pr_warn 1141 fs/jffs2/wbuf.c pr_warn("marking eraseblock at %08x as bad\n", bad_offset); pr_warn 1264 fs/jffs2/wbuf.c pr_warn("flash size adjusted to %dKiB\n", c->flash_size); pr_warn 83 fs/jffs2/write.c pr_warn("%s(): ri->totlen (0x%08x) != sizeof(*ri) (0x%08zx) + datalen (0x%08x)\n", pr_warn 427 fs/jffs2/write.c pr_warn("Eep. We didn't actually write any data in jffs2_write_inode_range()\n"); pr_warn 644 fs/jffs2/write.c pr_warn("Deleting inode #%u with active dentry \"%s\"->ino #%u\n", pr_warn 590 fs/lockd/host.c pr_warn("lockd: couldn't shutdown host module for net %x!\n", pr_warn 286 fs/locks.c pr_warn("%s: fl_owner=%p fl_flags=0x%x fl_type=0x%x fl_pid=%u\n", list_type, fl->fl_owner, fl->fl_flags, fl->fl_type, fl->fl_pid); pr_warn 298 fs/locks.c pr_warn("Leaked locks on dev=0x%x:0x%x ino=0x%lx:\n", pr_warn 316 fs/locks.c pr_warn("Leaked %s lock on dev=0x%x:0x%x ino=0x%lx " pr_warn 1654 fs/namespace.c pr_warn("VFS: \"mand\" mount option not supported"); pr_warn 2481 fs/namespace.c pr_warn("%s filesystem being %s at %s supports timestamps until %04ld (0x%llx)\n", pr_warn 3443 fs/namespace.c pr_warn("VFS: Mount too revealing\n"); pr_warn 321 fs/nfs/blocklayout/dev.c pr_warn("pNFS: failed to open device %s (%ld)\n", pr_warn 1474 fs/nfs/nfs4state.c pr_warn("NFSv4: state recovery failed for open file %pd2, " pr_warn 2290 fs/nfs/nfs4state.c pr_warn("NFS: %s unhandled error %d. Exiting with error EIO\n", pr_warn 626 fs/nfsd/nfs4recover.c pr_warn("NFSD: attempt to initialize legacy client tracking in a container ignored.\n"); pr_warn 1615 fs/nfsd/nfs4recover.c pr_warn("NFSD: nfsdcld GetVersion upcall failed. Please upgrade nfsdcld.\n"); pr_warn 1620 fs/nfsd/nfs4recover.c pr_warn("NFSD: nfsdcld GraceStart upcall failed. Please upgrade nfsdcld.\n"); pr_warn 1880 fs/nfsd/nfs4recover.c pr_warn("NFSD: attempt to initialize umh client tracking in a container ignored.\n"); pr_warn 3836 fs/nfsd/nfs4xdr.c pr_warn("NFS: SECINFO: security flavor %u " pr_warn 46 fs/ntfs/debug.c pr_warn("(device %s): %s(): %pV\n", pr_warn 49 fs/ntfs/debug.c pr_warn("%s(): %pV\n", flen ? function : "", &vaf); pr_warn 27 fs/overlayfs/copy_up.c pr_warn("overlayfs: \"check_copy_up\" module option is obsolete\n"); pr_warn 137 fs/overlayfs/dir.c pr_warn("overlayfs: failed lookup after mkdir (%pd2, err=%i).\n", pr_warn 695 fs/overlayfs/super.c pr_warn("overlayfs: failed to create directory %s/%s (errno: %i); mounting read-only\n", pr_warn 807 fs/overlayfs/super.c pr_warn("overlayfs: fs on '%s' does not support file handles, falling back to index=off,nfs_export=off.\n", pr_warn 1020 fs/overlayfs/super.c pr_warn("overlayfs: %s is in-use as upperdir/workdir of another mount, accessing files from both mounts will result in undefined behavior.\n", pr_warn 1111 fs/overlayfs/super.c pr_warn("overlayfs: upper fs needs to support d_type.\n"); pr_warn 1119 fs/overlayfs/super.c pr_warn("overlayfs: upper fs does not support tmpfile.\n"); pr_warn 1129 fs/overlayfs/super.c pr_warn("overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off.\n"); pr_warn 1139 fs/overlayfs/super.c pr_warn("overlayfs: upper fs does not support file handles, falling back to index=off.\n"); pr_warn 1148 fs/overlayfs/super.c pr_warn("overlayfs: NFS export requires \"index=on\", falling back to nfs_export=off.\n"); pr_warn 1247 fs/overlayfs/super.c pr_warn("overlayfs: try deleting index dir or mounting with '-o index=off' to disable inodes index.\n"); pr_warn 1300 fs/overlayfs/super.c pr_warn("overlayfs: %s uuid detected in lower fs '%pd2', falling back to index=off,nfs_export=off.\n", pr_warn 1439 fs/overlayfs/super.c pr_warn("overlayfs: NFS export requires \"redirect_dir=nofollow\" on non-upper mount, falling back to nfs_export=off.\n"); pr_warn 1663 fs/overlayfs/super.c pr_warn("overlayfs: NFS export requires an index dir, falling back to nfs_export=off.\n"); pr_warn 1669 fs/overlayfs/super.c pr_warn("overlayfs: NFS export is not supported with metadata only copy up, falling back to nfs_export=off.\n"); pr_warn 579 fs/overlayfs/util.c pr_warn("overlayfs: cannot set %s xattr on upper\n", name); pr_warn 732 fs/proc/vmcore.c pr_warn("Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x%x, n_descsz=0x%x\n", pr_warn 742 fs/proc/vmcore.c pr_warn("Warning: Zero PT_NOTE entries found\n"); pr_warn 923 fs/proc/vmcore.c pr_warn("Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x%x, n_descsz=0x%x\n", pr_warn 933 fs/proc/vmcore.c pr_warn("Warning: Zero PT_NOTE entries found\n"); pr_warn 1212 fs/proc/vmcore.c pr_warn("Warning: Core image elf header is not sane\n"); pr_warn 1268 fs/proc/vmcore.c pr_warn("Warning: Core image elf header is not sane\n"); pr_warn 1311 fs/proc/vmcore.c pr_warn("Warning: Core image elf header not found\n"); pr_warn 1324 fs/proc/vmcore.c pr_warn("Warning: Core image elf header is not sane\n"); pr_warn 1553 fs/proc/vmcore.c pr_warn("Kdump: vmcore not initialized\n"); pr_warn 561 fs/pstore/platform.c pr_warn("ignoring unexpected backend '%s'\n", psi->name); pr_warn 567 fs/pstore/platform.c pr_warn("backend '%s' must support at least one frontend\n", pr_warn 574 fs/pstore/platform.c pr_warn("backend '%s' must implement read() and write()\n", pr_warn 581 fs/pstore/platform.c pr_warn("backend '%s' already loaded: ignoring '%s'\n", pr_warn 669 fs/pstore/platform.c pr_warn("ignored compressed record type %d\n", record->type); pr_warn 675 fs/pstore/platform.c pr_warn("no decompression method initialized!\n"); pr_warn 772 fs/pstore/platform.c pr_warn("failed to create %d record(s) from '%s'\n", pr_warn 498 fs/pstore/ram_core.c pr_warn("ECC failed %s\n", prz->label); pr_warn 15 fs/squashfs/squashfs.h #define WARNING(s, args...) pr_warn("SQUASHFS: "s, ## args) pr_warn 29 fs/sysfs/dir.c pr_warn("cannot create duplicate filename '%s/%s'\n", buf, name); pr_warn 131 fs/sysfs/group.c pr_warn("Can't update unknown attr grp name: %s/%s\n", pr_warn 52 fs/ubifs/misc.c pr_warn("UBIFS warning (ubi%d:%d pid %d): %ps: %pV\n", pr_warn 887 fs/udf/super.c pr_warn("incorrect volume identification, setting to " pr_warn 2344 fs/udf/super.c pr_warn("warning (device %s): %s: %pV", sb->s_id, function, &vaf); pr_warn 367 fs/udf/unicode.c pr_warn("incorrect dstring lengths (%d/%d)," pr_warn 340 fs/ufs/super.c pr_warn("(device %s): %s: %pV\n", pr_warn 338 include/linux/ceph/decode.h pr_warn("got struct_v %d struct_compat %d > %d of %s\n", pr_warn 226 include/linux/ceph/osdmap.h pr_warn("incomplete pg encoding\n"); pr_warn 231 include/linux/ceph/osdmap.h pr_warn("do not understand pg encoding %d > 1\n", pr_warn 538 include/linux/device-mapper.h #define DMWARN(fmt, ...) pr_warn(DM_FMT(fmt), ##__VA_ARGS__) pr_warn 587 include/linux/dma-fence.h pr_warn("f %llu#%llu: " fmt, __ff->context, __ff->seqno,\ pr_warn 813 include/linux/fb.h pr_warn("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__) pr_warn 1149 include/linux/mlx5/driver.h pr_warn("gid table length is zero\n"); pr_warn 263 include/linux/net.h net_ratelimited_function(pr_warn, fmt, ##__VA_ARGS__) pr_warn 62 include/linux/ratelimit.h pr_warn("%s: %d output lines suppressed due to ratelimiting\n", pr_warn 791 include/linux/tty.h #define tty_warn(tty, f, ...) tty_msg(pr_warn, tty, f, ##__VA_ARGS__) pr_warn 195 init/main.c pr_warn("Parameter %s is obsolete, ignored\n", pr_warn 466 init/main.c pr_warn("Malformed early option '%s'\n", param); pr_warn 866 init/main.c pr_warn("initcall_blacklist requires CONFIG_KALLSYMS\n"); pr_warn 1098 init/main.c pr_warn("This architecture does not have kernel memory protection.\n"); pr_warn 372 kernel/audit.c pr_warn("audit_lost=%u audit_rate_limit=%u audit_backlog_limit=%u\n", pr_warn 1789 kernel/audit.c pr_warn("audit_backlog=%d > audit_backlog_limit=%d\n", pr_warn 528 kernel/auditfilter.c pr_warn("audit rule for LSM \'%s\' is invalid\n", pr_warn 797 kernel/auditfilter.c pr_warn("audit rule for LSM \'%s\' is invalid\n", pr_warn 1755 kernel/auditsc.c pr_warn("out of memory, audit has lost a tree reference\n"); pr_warn 1812 kernel/auditsc.c pr_warn("out of memory, audit has lost a tree reference\n"); pr_warn 1561 kernel/bpf/core.c pr_warn("BPF interpreter: unknown opcode %02x\n", insn->code); pr_warn 1057 kernel/cgroup/cgroup-v1.c pr_warn("option changes via remount are deprecated (pid=%d comm=%s)\n", pr_warn 1171 kernel/cgroup/cgroup-v1.c pr_warn("new mount options do not match the existing superblock, will be ignored\n"); pr_warn 1778 kernel/cgroup/cgroup.c pr_warn("partial failure to rebind %s controller (err=%d)\n", pr_warn 3942 kernel/cgroup/cgroup.c pr_warn("%s: failed to add %s, err=%d\n", pr_warn 5198 kernel/cgroup/cgroup.c pr_warn("%s (%d) created nested cgroup for controller \"%s\" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.\n", pr_warn 5201 kernel/cgroup/cgroup.c pr_warn("\"memory\" requires setting use_hierarchy to 1 on the root\n"); pr_warn 868 kernel/cgroup/cpuset.c pr_warn("rebuild_sched_domains confused: nslot %d, ndoms %d, csn %d, i %d, apn %d\n", pr_warn 176 kernel/cgroup/rdma.c pr_warn("Invalid device %p or rdma cgroup %p\n", cg, device); pr_warn 1303 kernel/cpu.c pr_warn("Error taking CPU%d up: %d\n", cpu, error); pr_warn 50 kernel/crash_core.c pr_warn("crashkernel: Memory value expected\n"); pr_warn 55 kernel/crash_core.c pr_warn("crashkernel: '-' expected\n"); pr_warn 64 kernel/crash_core.c pr_warn("crashkernel: Memory value expected\n"); pr_warn 69 kernel/crash_core.c pr_warn("crashkernel: end <= start\n"); pr_warn 75 kernel/crash_core.c pr_warn("crashkernel: ':' expected\n"); pr_warn 82 kernel/crash_core.c pr_warn("Memory value expected\n"); pr_warn 87 kernel/crash_core.c pr_warn("crashkernel: invalid size\n"); pr_warn 105 kernel/crash_core.c pr_warn("Memory value expected after '@'\n"); pr_warn 130 kernel/crash_core.c pr_warn("crashkernel: memory value expected\n"); pr_warn 137 kernel/crash_core.c pr_warn("crashkernel: unrecognized char: %c\n", *cur); pr_warn 168 kernel/crash_core.c pr_warn("crashkernel: memory value expected\n"); pr_warn 174 kernel/crash_core.c pr_warn("crashkernel: unrecognized char: %c\n", *cur); pr_warn 179 kernel/crash_core.c pr_warn("crashkernel: unrecognized char: %c\n", *cur); pr_warn 383 kernel/crash_core.c pr_warn("Memory allocation for vmcoreinfo_data failed\n"); pr_warn 392 kernel/crash_core.c pr_warn("Memory allocation for vmcoreinfo_note failed\n"); pr_warn 955 kernel/dma/debug.c pr_warn("%d debug entries requested but only %d allocated\n", pr_warn 170 kernel/dma/swiotlb.c pr_warn("No low mem\n"); pr_warn 267 kernel/dma/swiotlb.c pr_warn("Cannot allocate buffer"); pr_warn 309 kernel/dma/swiotlb.c pr_warn("only able to allocate %ld MB\n", pr_warn 399 kernel/events/uprobes.c pr_warn("ref_ctr going negative. vaddr: 0x%lx, " pr_warn 416 kernel/events/uprobes.c pr_warn("ref_ctr %s failed for inode: 0x%lx offset: " pr_warn 727 kernel/events/uprobes.c pr_warn("ref_ctr_offset mismatch. inode: 0x%lx offset: 0x%llx " pr_warn 1788 kernel/events/uprobes.c pr_warn("uprobe: %s:%d failed to %s\n", pr_warn 78 kernel/gcov/fs.c pr_warn("invalid gcov_persist parameter '%s'\n", str); pr_warn 459 kernel/gcov/fs.c pr_warn("out of memory\n"); pr_warn 626 kernel/gcov/fs.c pr_warn("could not add '%s' (out of memory)\n", pr_warn 640 kernel/gcov/fs.c pr_warn("discarding saved data for %s " pr_warn 652 kernel/gcov/fs.c pr_warn("could not add '%s' (incompatible " pr_warn 688 kernel/gcov/fs.c pr_warn("could not save data for '%s' " pr_warn 705 kernel/gcov/fs.c pr_warn("could not remove '%s' (not found)\n", pr_warn 745 kernel/gcov/fs.c pr_warn("could not remove '%s' (not found)\n", pr_warn 44 kernel/irq/cpuhotplug.c pr_warn("Eff. affinity %*pbl of IRQ %u contains only offline CPUs after offlining CPU %u\n", pr_warn 330 kernel/irq/internals.h pr_warn("Failed to allocate irq timing stats for irq%d (%d)", pr_warn 31 kernel/irq/ipi.c pr_warn("Reservation on a non IPI domain\n"); pr_warn 36 kernel/irq/ipi.c pr_warn("Reservation is not in possible_cpu_mask\n"); pr_warn 42 kernel/irq/ipi.c pr_warn("Reservation for empty destination mask\n"); pr_warn 73 kernel/irq/ipi.c pr_warn("Destination mask has holes\n"); pr_warn 80 kernel/irq/ipi.c pr_warn("Can't reserve IPI, failed to alloc descs\n"); pr_warn 88 kernel/irq/ipi.c pr_warn("Can't reserve IPI, failed to alloc hw irqs\n"); pr_warn 130 kernel/irq/ipi.c pr_warn("Trying to destroy a non IPI domain!\n"); pr_warn 294 kernel/irq/irqdesc.c pr_warn("Failed to add kobject for irq %d\n", irq); pr_warn 778 kernel/irq/irqdomain.c pr_warn("no irq domain found for %s !\n", pr_warn 820 kernel/irq/irqdomain.c pr_warn("type mismatch, failed to map hwirq-%lu for %s!\n", pr_warn 1567 kernel/irq/manage.c pr_warn("irq %d uses trigger mode %u; requested %u\n", pr_warn 349 kernel/irq/matrix.c pr_warn("Interrupt reservation exceeds available resources\n"); pr_warn 931 kernel/irq/timings.c pr_warn("irq timings already initialized, skipping selftest\n"); pr_warn 519 kernel/kexec_core.c pr_warn("Could not allocate vmcoreinfo buffer\n"); pr_warn 524 kernel/kexec_core.c pr_warn("Could not vmap vmcoreinfo buffer\n"); pr_warn 1107 kernel/kexec_core.c pr_warn("Memory allocation for saving cpu register states failed\n"); pr_warn 2504 kernel/kprobes.c pr_warn("Kprobes globally enabled, but failed to arm %d out of %d probes\n", pr_warn 2547 kernel/kprobes.c pr_warn("Kprobes globally disabled, but failed to disarm %d out of %d probes\n", pr_warn 934 kernel/livepatch/core.c pr_warn("pre-patch callback failed for object '%s'\n", pr_warn 941 kernel/livepatch/core.c pr_warn("failed to patch object '%s'\n", pr_warn 953 kernel/livepatch/core.c pr_warn("failed to enable patch '%s'\n", patch->mod->name); pr_warn 989 kernel/livepatch/core.c pr_warn("This architecture doesn't have support for the livepatch consistency model.\n"); pr_warn 990 kernel/livepatch/core.c pr_warn("The livepatch transition may never complete.\n"); pr_warn 1135 kernel/livepatch/core.c pr_warn("failed to initialize patch '%s' for module '%s' (%d)\n", pr_warn 1145 kernel/livepatch/core.c pr_warn("pre-patch callback failed for object '%s'\n", pr_warn 1152 kernel/livepatch/core.c pr_warn("failed to apply patch '%s' to module '%s' (%d)\n", pr_warn 1175 kernel/livepatch/core.c pr_warn("patch '%s' failed for module '%s', refusing to load module '%s'\n", pr_warn 634 kernel/livepatch/transition.c pr_warn("forcing remaining tasks to the patched state\n"); pr_warn 176 kernel/locking/lock_events.c pr_warn("Could not create '%s' debugfs entries\n", LOCK_EVENTS_DIR); pr_warn 1625 kernel/locking/lockdep.c pr_warn("\n"); pr_warn 1626 kernel/locking/lockdep.c pr_warn("======================================================\n"); pr_warn 1627 kernel/locking/lockdep.c pr_warn("WARNING: possible circular locking dependency detected\n"); pr_warn 1629 kernel/locking/lockdep.c pr_warn("------------------------------------------------------\n"); pr_warn 1630 kernel/locking/lockdep.c pr_warn("%s/%d is trying to acquire lock:\n", pr_warn 1634 kernel/locking/lockdep.c pr_warn("\nbut task is already holding lock:\n"); pr_warn 1637 kernel/locking/lockdep.c pr_warn("\nwhich lock already depends on the new lock.\n\n"); pr_warn 1638 kernel/locking/lockdep.c pr_warn("\nthe existing dependency chain (in reverse order) is:\n"); pr_warn 2042 kernel/locking/lockdep.c pr_warn("\n"); pr_warn 2043 kernel/locking/lockdep.c pr_warn("=====================================================\n"); pr_warn 2044 kernel/locking/lockdep.c pr_warn("WARNING: %s-safe -> %s-unsafe lock order detected\n", pr_warn 2047 kernel/locking/lockdep.c pr_warn("-----------------------------------------------------\n"); pr_warn 2048 kernel/locking/lockdep.c pr_warn("%s/%d [HC%u[%lu]:SC%u[%lu]:HE%u:SE%u] is trying to acquire:\n", pr_warn 2056 kernel/locking/lockdep.c pr_warn("\nand this task is already holding:\n"); pr_warn 2058 kernel/locking/lockdep.c pr_warn("which would create a new lock dependency:\n"); pr_warn 2064 kernel/locking/lockdep.c pr_warn("\nbut this new dependency connects a %s-irq-safe lock:\n", pr_warn 2067 kernel/locking/lockdep.c pr_warn("\n... which became %s-irq-safe at:\n", irqclass); pr_warn 2071 kernel/locking/lockdep.c pr_warn("\nto a %s-irq-unsafe lock:\n", irqclass); pr_warn 2073 kernel/locking/lockdep.c pr_warn("\n... which became %s-irq-unsafe at:\n", irqclass); pr_warn 2074 kernel/locking/lockdep.c pr_warn("..."); pr_warn 2078 kernel/locking/lockdep.c pr_warn("\nother info that might help us debug this:\n\n"); pr_warn 2084 kernel/locking/lockdep.c pr_warn("\nthe dependencies between %s-irq-safe lock and the holding lock:\n", irqclass); pr_warn 2090 kernel/locking/lockdep.c pr_warn("\nthe dependencies between the lock to be acquired"); pr_warn 2091 kernel/locking/lockdep.c pr_warn(" and %s-irq-unsafe lock:\n", irqclass); pr_warn 2097 kernel/locking/lockdep.c pr_warn("\nstack backtrace:\n"); pr_warn 2358 kernel/locking/lockdep.c pr_warn("\n"); pr_warn 2359 kernel/locking/lockdep.c pr_warn("============================================\n"); pr_warn 2360 kernel/locking/lockdep.c pr_warn("WARNING: possible recursive locking detected\n"); pr_warn 2362 kernel/locking/lockdep.c pr_warn("--------------------------------------------\n"); pr_warn 2363 kernel/locking/lockdep.c pr_warn("%s/%d is trying to acquire lock:\n", pr_warn 2366 kernel/locking/lockdep.c pr_warn("\nbut task is already holding lock:\n"); pr_warn 2369 kernel/locking/lockdep.c pr_warn("\nother info that might help us debug this:\n"); pr_warn 2373 kernel/locking/lockdep.c pr_warn("\nstack backtrace:\n"); pr_warn 2711 kernel/locking/lockdep.c pr_warn("\n"); pr_warn 2712 kernel/locking/lockdep.c pr_warn("============================\n"); pr_warn 2713 kernel/locking/lockdep.c pr_warn("WARNING: chain_key collision\n"); pr_warn 2715 kernel/locking/lockdep.c pr_warn("----------------------------\n"); pr_warn 2716 kernel/locking/lockdep.c pr_warn("%s/%d: ", current->comm, task_pid_nr(current)); pr_warn 2717 kernel/locking/lockdep.c pr_warn("Hash chain already cached but the contents don't match!\n"); pr_warn 2719 kernel/locking/lockdep.c pr_warn("Held locks:"); pr_warn 2722 kernel/locking/lockdep.c pr_warn("Locks in cached chain:"); pr_warn 2725 kernel/locking/lockdep.c pr_warn("\nstack backtrace:\n"); pr_warn 3077 kernel/locking/lockdep.c pr_warn("\n"); pr_warn 3078 kernel/locking/lockdep.c pr_warn("================================\n"); pr_warn 3079 kernel/locking/lockdep.c pr_warn("WARNING: inconsistent lock state\n"); pr_warn 3081 kernel/locking/lockdep.c pr_warn("--------------------------------\n"); pr_warn 3083 kernel/locking/lockdep.c pr_warn("inconsistent {%s} -> {%s} usage.\n", pr_warn 3086 kernel/locking/lockdep.c pr_warn("%s/%d [HC%u[%lu]:SC%u[%lu]:HE%u:SE%u] takes:\n", pr_warn 3094 kernel/locking/lockdep.c pr_warn("{%s} state was registered at:\n", usage_str[prev_bit]); pr_warn 3098 kernel/locking/lockdep.c pr_warn("\nother info that might help us debug this:\n"); pr_warn 3103 kernel/locking/lockdep.c pr_warn("\nstack backtrace:\n"); pr_warn 3138 kernel/locking/lockdep.c pr_warn("\n"); pr_warn 3139 kernel/locking/lockdep.c pr_warn("========================================================\n"); pr_warn 3140 kernel/locking/lockdep.c pr_warn("WARNING: possible irq lock inversion dependency detected\n"); pr_warn 3142 kernel/locking/lockdep.c pr_warn("--------------------------------------------------------\n"); pr_warn 3143 kernel/locking/lockdep.c pr_warn("%s/%d just changed the state of lock:\n", pr_warn 3147 kernel/locking/lockdep.c pr_warn("but this lock took another, %s-unsafe lock in the past:\n", irqclass); pr_warn 3149 kernel/locking/lockdep.c pr_warn("but this lock was taken by another, %s-safe lock in the past:\n", irqclass); pr_warn 3151 kernel/locking/lockdep.c pr_warn("\n\nand interrupts could create inverse lock ordering between them.\n\n"); pr_warn 3153 kernel/locking/lockdep.c pr_warn("\nother info that might help us debug this:\n"); pr_warn 3159 kernel/locking/lockdep.c pr_warn("lockdep:%s bad path found in chain graph\n", __func__); pr_warn 3175 kernel/locking/lockdep.c pr_warn("\nthe shortest dependencies between 2nd lock and 1st lock:\n"); pr_warn 3181 kernel/locking/lockdep.c pr_warn("\nstack backtrace:\n"); pr_warn 3783 kernel/locking/lockdep.c pr_warn("\n"); pr_warn 3784 kernel/locking/lockdep.c pr_warn("==================================\n"); pr_warn 3785 kernel/locking/lockdep.c pr_warn("WARNING: Nested lock was not taken\n"); pr_warn 3787 kernel/locking/lockdep.c pr_warn("----------------------------------\n"); pr_warn 3789 kernel/locking/lockdep.c pr_warn("%s/%d is trying to lock:\n", curr->comm, task_pid_nr(curr)); pr_warn 3792 kernel/locking/lockdep.c pr_warn("\nbut this task is not holding:\n"); pr_warn 3793 kernel/locking/lockdep.c pr_warn("%s\n", hlock->nest_lock->name); pr_warn 3795 kernel/locking/lockdep.c pr_warn("\nstack backtrace:\n"); pr_warn 3798 kernel/locking/lockdep.c pr_warn("\nother info that might help us debug this:\n"); pr_warn 3801 kernel/locking/lockdep.c pr_warn("\nstack backtrace:\n"); pr_warn 3996 kernel/locking/lockdep.c pr_warn("\n"); pr_warn 3997 kernel/locking/lockdep.c pr_warn("=====================================\n"); pr_warn 3998 kernel/locking/lockdep.c pr_warn("WARNING: bad unlock balance detected!\n"); pr_warn 4000 kernel/locking/lockdep.c pr_warn("-------------------------------------\n"); pr_warn 4001 kernel/locking/lockdep.c pr_warn("%s/%d is trying to release lock (", pr_warn 4006 kernel/locking/lockdep.c pr_warn("but there are no more locks to release!\n"); pr_warn 4007 kernel/locking/lockdep.c pr_warn("\nother info that might help us debug this:\n"); pr_warn 4010 kernel/locking/lockdep.c pr_warn("\nstack backtrace:\n"); pr_warn 4601 kernel/locking/lockdep.c pr_warn("\n"); pr_warn 4602 kernel/locking/lockdep.c pr_warn("=================================\n"); pr_warn 4603 kernel/locking/lockdep.c pr_warn("WARNING: bad contention detected!\n"); pr_warn 4605 kernel/locking/lockdep.c pr_warn("---------------------------------\n"); pr_warn 4606 kernel/locking/lockdep.c pr_warn("%s/%d is trying to contend lock (", pr_warn 4611 kernel/locking/lockdep.c pr_warn("but there are no locks held!\n"); pr_warn 4612 kernel/locking/lockdep.c pr_warn("\nother info that might help us debug this:\n"); pr_warn 4615 kernel/locking/lockdep.c pr_warn("\nstack backtrace:\n"); pr_warn 5257 kernel/locking/lockdep.c pr_warn("\n"); pr_warn 5258 kernel/locking/lockdep.c pr_warn("=========================\n"); pr_warn 5259 kernel/locking/lockdep.c pr_warn("WARNING: held lock freed!\n"); pr_warn 5261 kernel/locking/lockdep.c pr_warn("-------------------------\n"); pr_warn 5262 kernel/locking/lockdep.c pr_warn("%s/%d is freeing memory %px-%px, with a lock still held there!\n", pr_warn 5267 kernel/locking/lockdep.c pr_warn("\nstack backtrace:\n"); pr_warn 5315 kernel/locking/lockdep.c pr_warn("\n"); pr_warn 5316 kernel/locking/lockdep.c pr_warn("====================================\n"); pr_warn 5317 kernel/locking/lockdep.c pr_warn("WARNING: %s/%d still has locks held!\n", pr_warn 5320 kernel/locking/lockdep.c pr_warn("------------------------------------\n"); pr_warn 5322 kernel/locking/lockdep.c pr_warn("\nstack backtrace:\n"); pr_warn 5339 kernel/locking/lockdep.c pr_warn("INFO: lockdep is turned off.\n"); pr_warn 5342 kernel/locking/lockdep.c pr_warn("\nShowing all locks held in the system:\n"); pr_warn 5354 kernel/locking/lockdep.c pr_warn("\n"); pr_warn 5355 kernel/locking/lockdep.c pr_warn("=============================================\n\n"); pr_warn 5381 kernel/locking/lockdep.c pr_warn("\n"); pr_warn 5382 kernel/locking/lockdep.c pr_warn("================================================\n"); pr_warn 5383 kernel/locking/lockdep.c pr_warn("WARNING: lock held when returning to user space!\n"); pr_warn 5385 kernel/locking/lockdep.c pr_warn("------------------------------------------------\n"); pr_warn 5386 kernel/locking/lockdep.c pr_warn("%s/%d is leaving the kernel with locks still held!\n", pr_warn 5403 kernel/locking/lockdep.c pr_warn("\n"); pr_warn 5404 kernel/locking/lockdep.c pr_warn("=============================\n"); pr_warn 5405 kernel/locking/lockdep.c pr_warn("WARNING: suspicious RCU usage\n"); pr_warn 5407 kernel/locking/lockdep.c pr_warn("-----------------------------\n"); pr_warn 5408 kernel/locking/lockdep.c pr_warn("%s:%d %s!\n", file, line, s); pr_warn 5409 kernel/locking/lockdep.c pr_warn("\nother info that might help us debug this:\n\n"); pr_warn 5410 kernel/locking/lockdep.c pr_warn("\n%srcu_scheduler_active = %d, debug_locks = %d\n", pr_warn 5437 kernel/locking/lockdep.c pr_warn("RCU used illegally from extended quiescent state!\n"); pr_warn 5440 kernel/locking/lockdep.c pr_warn("\nstack backtrace:\n"); pr_warn 106 kernel/locking/rtmutex-debug.c pr_warn("\n"); pr_warn 107 kernel/locking/rtmutex-debug.c pr_warn("============================================\n"); pr_warn 108 kernel/locking/rtmutex-debug.c pr_warn("WARNING: circular locking deadlock detected!\n"); pr_warn 109 kernel/locking/rtmutex-debug.c pr_warn("%s\n", print_tainted()); pr_warn 110 kernel/locking/rtmutex-debug.c pr_warn("--------------------------------------------\n"); pr_warn 508 kernel/module.c pr_warn("Symbol %s is being used by a non-GPL module, " pr_warn 516 kernel/module.c pr_warn("Symbol %s is marked as UNUSED, however this module is " pr_warn 518 kernel/module.c pr_warn("This symbol will go away in the future.\n"); pr_warn 519 kernel/module.c pr_warn("Please evaluate if this is the right api to use and " pr_warn 654 kernel/module.c pr_warn("%s: per-cpu alignment %li > %li\n", pr_warn 661 kernel/module.c pr_warn("%s: Could not allocate %lu bytes percpu data\n", pr_warn 1282 kernel/module.c pr_warn("%s: %s: kernel tainted.\n", mod->name, reason); pr_warn 1341 kernel/module.c pr_warn("%s: disagrees about version of symbol %s\n", pr_warn 1417 kernel/module.c pr_warn( pr_warn 1491 kernel/module.c pr_warn("%s: gave up waiting for init of module %s.\n", pr_warn 2317 kernel/module.c pr_warn("%s: please compile with -fno-common\n", pr_warn 2345 kernel/module.c pr_warn("%s: Unknown symbol %s (err %d)\n", pr_warn 2515 kernel/module.c pr_warn("%s: module license '%s' taints kernel.\n", pr_warn 2973 kernel/module.c pr_warn("%s: loading module not compiled with retpoline compiler.\n", pr_warn 3077 kernel/module.c pr_warn("%s: module has no symbols (stripped?)\n", pr_warn 3084 kernel/module.c pr_warn("%s: No module found in object\n", pr_warn 3129 kernel/module.c pr_warn("%s: loading out-of-tree module taints kernel.\n", pr_warn 3138 kernel/module.c pr_warn("%s: module is from the staging directory, the quality " pr_warn 3190 kernel/module.c pr_warn("%s: has both .ctors and .init_array.\n", pr_warn 3244 kernel/module.c pr_warn("%s: Ignoring obsolete parameters\n", mod->name); pr_warn 3338 kernel/module.c pr_warn("%s: module license taints kernel.\n", mod->name); pr_warn 3587 kernel/module.c pr_warn("%s: '%s'->init suspiciously returned %d, it should " pr_warn 3779 kernel/module.c pr_warn("%s: unknown parameter '%s' ignored\n", modname, param); pr_warn 3912 kernel/module.c pr_warn("%s: parameters '%s' after `--' ignored\n", pr_warn 434 kernel/panic.c pr_warn("Disabling lock debugging due to kernel taint\n"); pr_warn 539 kernel/panic.c pr_warn("---[ end trace %016llx ]---\n", (unsigned long long)oops_id); pr_warn 564 kernel/panic.c pr_warn("WARNING: CPU: %d PID: %d at %s:%d %pS\n", pr_warn 568 kernel/panic.c pr_warn("WARNING: CPU: %d PID: %d at %pS\n", pr_warn 606 kernel/panic.c pr_warn(CUT_HERE); pr_warn 625 kernel/panic.c pr_warn(CUT_HERE); pr_warn 191 kernel/params.c pr_warn("%s: option '%s' enabled irq's!\n", pr_warn 144 kernel/power/energy_model.c pr_warn("pd%d: hertz/watts ratio non-monotonically decreasing: em_cap_state %d >= em_cap_state%d\n", pr_warn 802 kernel/power/main.c pr_warn("PM: Enabling pm_trace changes system date and time during resume.\n" pr_warn 555 kernel/power/suspend.c pr_warn("Unsupported test mode for suspend to idle, please choose none/freezer/devices/platform.\n"); pr_warn 2952 kernel/printk/printk.c pr_warn("bootconsole [%s%d] uses init memory and must be disabled even before the real one is ready\n", pr_warn 74 kernel/profile.c pr_warn("kernel sleep profiling requires CONFIG_SCHEDSTATS\n"); pr_warn 1374 kernel/rcu/srcutree.c pr_warn("Failed to register srcu module notifier\n"); pr_warn 1486 kernel/rcu/tree_plugin.h pr_warn("rcu_nocbs= bad CPU range, all CPUs set\n"); pr_warn 449 kernel/reboot.c pr_warn("Failed to start orderly reboot: forcing the issue\n"); pr_warn 464 kernel/reboot.c pr_warn("Failed to start orderly shutdown: forcing the issue\n"); pr_warn 1155 kernel/resource.c pr_warn("Unaddressable device %s %pR conflicts with %pR", pr_warn 2796 kernel/sched/core.c pr_warn("Unable to parse schedstats=\n"); pr_warn 691 kernel/sched/cpufreq_schedutil.c pr_warn("%s: failed to set SCHED_DEADLINE\n", __func__); pr_warn 89 kernel/sched/isolation.c pr_warn("Housekeeping: nohz_full= or isolcpus= incorrect CPU range\n"); pr_warn 102 kernel/sched/isolation.c pr_warn("Housekeeping: must include one present CPU, " pr_warn 113 kernel/sched/isolation.c pr_warn("Housekeeping: nohz_full= must match isolcpus=\n"); pr_warn 125 kernel/sched/isolation.c pr_warn("Housekeeping: nohz unsupported." pr_warn 166 kernel/sched/isolation.c pr_warn("isolcpus: Error, unknown flag\n"); pr_warn 376 kernel/sched/topology.c pr_warn("rd %*pbl: Disabling EAS, schedutil is mandatory\n", pr_warn 1190 kernel/sched/topology.c pr_warn("Unable to set relax_domain_level\n"); pr_warn 1805 kernel/seccomp.c pr_warn("seccomp: sysctl registration failed\n"); pr_warn 234 kernel/smp.c pr_warn("IPI callback %pS sent to offline CPU\n", pr_warn 41 kernel/stackleak.c pr_warn("stackleak: kernel stack erasing is %s\n", pr_warn 239 kernel/time/clocksource.c pr_warn("timekeeping watchdog on CPU%d: Marking clocksource '%s' as unstable because the skew is too large:\n", pr_warn 241 kernel/time/clocksource.c pr_warn(" '%s' wd_now: %llx wd_last: %llx mask: %llx\n", pr_warn 243 kernel/time/clocksource.c pr_warn(" '%s' cs_now: %llx cs_last: %llx mask: %llx\n", pr_warn 482 kernel/time/clocksource.c pr_warn("Nonstop clocksource %s should not supply suspend/resume interfaces\n", pr_warn 759 kernel/time/clocksource.c pr_warn("Override clocksource %s is unstable and not HRT compatible - cannot switch while in HRT/NOHZ mode\n", pr_warn 1230 kernel/time/clocksource.c pr_warn("clock=pmtmr is deprecated - use clocksource=acpi_pm\n"); pr_warn 1233 kernel/time/clocksource.c pr_warn("clock= boot option is deprecated - use clocksource=xyz\n"); pr_warn 732 kernel/time/hrtimer.c pr_warn("Could not switch to high resolution mode on CPU %u\n", pr_warn 430 kernel/time/tick-sched.c pr_warn("NO_HZ: Can't run full dynticks because arch doesn't support irq work self-IPIs\n"); pr_warn 441 kernel/time/tick-sched.c pr_warn("NO_HZ: Clearing %d from nohz_full range " pr_warn 905 kernel/time/tick-sched.c pr_warn("NOHZ: local_softirq_pending %02x\n", pr_warn 1544 kernel/time/timekeeping.c pr_warn("Persistent clock returned invalid value"); pr_warn 539 kernel/torture.c pr_warn("Concurrent rmmod and shutdown illegal!\n"); pr_warn 708 kernel/torture.c pr_warn("Concurrent rmmod and shutdown illegal!\n"); pr_warn 1613 kernel/trace/blktrace.c pr_warn("Warning: could not register block events\n"); pr_warn 1618 kernel/trace/blktrace.c pr_warn("Warning: could not register the block tracer\n"); pr_warn 998 kernel/trace/ftrace.c pr_warn("Could not create tracefs 'function_profile_enabled' entry\n"); pr_warn 2315 kernel/trace/ftrace.c pr_warn("Bad trampoline accounting at: %p (%pS) (%lx)\n", pr_warn 2347 kernel/trace/ftrace.c pr_warn("Bad trampoline accounting at: %p (%pS)\n", pr_warn 2783 kernel/trace/ftrace.c pr_warn(" %pS flags:%lx\n", pr_warn 6333 kernel/trace/ftrace.c pr_warn("op=%p %pS\n", op, op); pr_warn 3049 kernel/trace/trace.c pr_warn("\n"); pr_warn 3050 kernel/trace/trace.c pr_warn("**********************************************************\n"); pr_warn 3051 kernel/trace/trace.c pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n"); pr_warn 3052 kernel/trace/trace.c pr_warn("** **\n"); pr_warn 3053 kernel/trace/trace.c pr_warn("** trace_printk() being used. Allocating extra memory. **\n"); pr_warn 3054 kernel/trace/trace.c pr_warn("** **\n"); pr_warn 3055 kernel/trace/trace.c pr_warn("** This means that this is a DEBUG kernel and it is **\n"); pr_warn 3056 kernel/trace/trace.c pr_warn("** unsafe for production use. **\n"); pr_warn 3057 kernel/trace/trace.c pr_warn("** **\n"); pr_warn 3058 kernel/trace/trace.c pr_warn("** If you see this message and you are not debugging **\n"); pr_warn 3059 kernel/trace/trace.c pr_warn("** the kernel, report this immediately to your vendor! **\n"); pr_warn 3060 kernel/trace/trace.c pr_warn("** **\n"); pr_warn 3061 kernel/trace/trace.c pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n"); pr_warn 3062 kernel/trace/trace.c pr_warn("**********************************************************\n"); pr_warn 5374 kernel/trace/trace.c pr_warn("Unable to allocate trace eval mapping\n"); pr_warn 5677 kernel/trace/trace.c pr_warn("Tracer '%s' is not allowed on command line, ignored\n", pr_warn 7831 kernel/trace/trace.c pr_warn("Could not create tracefs '%s' entry\n", cpu_dir); pr_warn 8020 kernel/trace/trace.c pr_warn("Could not create tracefs '%s' entry\n", name); pr_warn 8039 kernel/trace/trace.c pr_warn("Could not create tracefs directory 'options'\n"); pr_warn 9084 kernel/trace/trace.c pr_warn("Line length is too long: Should be less than %d\n", pr_warn 9185 kernel/trace/trace.c pr_warn("Trace clock %s not defined, going back to default\n", pr_warn 9289 kernel/trace/trace.c pr_warn("Can not set tracing clock due to lockdown\n"); pr_warn 221 kernel/trace/trace_dynevent.c pr_warn("Could not create tracefs 'dynamic_events' entry\n"); pr_warn 1913 kernel/trace/trace_events.c pr_warn("Failed to create system directory %s\n", name); pr_warn 1929 kernel/trace/trace_events.c pr_warn("Could not create tracefs '%s/filter' entry\n", name); pr_warn 1944 kernel/trace/trace_events.c pr_warn("No memory to create event subsystem %s\n", name); pr_warn 1972 kernel/trace/trace_events.c pr_warn("Could not create tracefs '%s' directory\n", name); pr_warn 1995 kernel/trace/trace_events.c pr_warn("Could not initialize trace point events/%s\n", pr_warn 2083 kernel/trace/trace_events.c pr_warn("Could not initialize trace events/%s\n", name); pr_warn 2463 kernel/trace/trace_events.c pr_warn("Could not create directory for event %s\n", pr_warn 2845 kernel/trace/trace_events.c pr_warn("Could not create directory for event %s\n", pr_warn 2869 kernel/trace/trace_events.c pr_warn("Could not create early event %s\n", pr_warn 2917 kernel/trace/trace_events.c pr_warn("Could not create tracefs 'set_event' entry\n"); pr_warn 2923 kernel/trace/trace_events.c pr_warn("Could not create tracefs 'events' directory\n"); pr_warn 2930 kernel/trace/trace_events.c pr_warn("Could not create tracefs 'enable' entry\n"); pr_warn 2939 kernel/trace/trace_events.c pr_warn("Could not create tracefs 'set_event_pid' entry\n"); pr_warn 2946 kernel/trace/trace_events.c pr_warn("Could not create tracefs 'header_page' entry\n"); pr_warn 2952 kernel/trace/trace_events.c pr_warn("Could not create tracefs 'header_event' entry\n"); pr_warn 3069 kernel/trace/trace_events.c pr_warn("Failed to enable trace event: %s\n", token); pr_warn 3157 kernel/trace/trace_events.c pr_warn("Could not create tracefs 'available_events' entry\n"); pr_warn 3160 kernel/trace/trace_events.c pr_warn("tracing: Failed to allocated generic fields"); pr_warn 3163 kernel/trace/trace_events.c pr_warn("tracing: Failed to allocate common fields"); pr_warn 3172 kernel/trace/trace_events.c pr_warn("Failed to register trace events module notifier\n"); pr_warn 3283 kernel/trace/trace_events.c pr_warn("Enabled event during self test!\n"); pr_warn 3311 kernel/trace/trace_events.c pr_warn("error enabling system %s\n", pr_warn 3320 kernel/trace/trace_events.c pr_warn("error disabling system %s\n", pr_warn 3335 kernel/trace/trace_events.c pr_warn("error enabling all events\n"); pr_warn 3344 kernel/trace/trace_events.c pr_warn("error disabling all events\n"); pr_warn 1222 kernel/trace/trace_events_hist.c pr_warn("Failed to register synthetic event: %s\n", pr_warn 6541 kernel/trace/trace_events_hist.c pr_warn("Could not register synth_event_ops\n"); pr_warn 6560 kernel/trace/trace_events_hist.c pr_warn("Could not create tracefs 'synthetic_events' entry\n"); pr_warn 1239 kernel/trace/trace_functions_graph.c pr_warn("function graph tracer: not enough memory\n"); pr_warn 1357 kernel/trace/trace_functions_graph.c pr_warn("Warning: could not register graph trace events\n"); pr_warn 1362 kernel/trace/trace_functions_graph.c pr_warn("Warning: could not register graph trace events\n"); pr_warn 493 kernel/trace/trace_kprobe.c pr_warn("Could not probe notrace function %s\n", pr_warn 613 kernel/trace/trace_kprobe.c pr_warn("This probe might be able to register after target module is loaded. Continue.\n"); pr_warn 649 kernel/trace/trace_kprobe.c pr_warn("Failed to register probe event(%d)\n", ret); pr_warn 656 kernel/trace/trace_kprobe.c pr_warn("This probe might be able to register after target module is loaded. Continue.\n"); pr_warn 690 kernel/trace/trace_kprobe.c pr_warn("Failed to re-register probe %s on %s: %d\n", pr_warn 1681 kernel/trace/trace_kprobe.c pr_warn("Failed to add event(%d): %s\n", ret, cmd); pr_warn 1714 kernel/trace/trace_kprobe.c pr_warn("Could not create tracefs 'kprobe_events' entry\n"); pr_warn 1721 kernel/trace/trace_kprobe.c pr_warn("Could not create tracefs 'kprobe_profile' entry\n"); pr_warn 1769 kernel/trace/trace_kprobe.c pr_warn("error on probing function entry.\n"); pr_warn 1775 kernel/trace/trace_kprobe.c pr_warn("error on getting new probe.\n"); pr_warn 1780 kernel/trace/trace_kprobe.c pr_warn("error on getting probe file.\n"); pr_warn 1791 kernel/trace/trace_kprobe.c pr_warn("error on probing function return.\n"); pr_warn 1797 kernel/trace/trace_kprobe.c pr_warn("error on getting 2nd new probe.\n"); pr_warn 1802 kernel/trace/trace_kprobe.c pr_warn("error on getting probe file.\n"); pr_warn 1826 kernel/trace/trace_kprobe.c pr_warn("error on getting test probe.\n"); pr_warn 1830 kernel/trace/trace_kprobe.c pr_warn("incorrect number of testprobe hits\n"); pr_warn 1836 kernel/trace/trace_kprobe.c pr_warn("error on getting probe file.\n"); pr_warn 1845 kernel/trace/trace_kprobe.c pr_warn("error on getting 2nd test probe.\n"); pr_warn 1849 kernel/trace/trace_kprobe.c pr_warn("incorrect number of testprobe2 hits\n"); pr_warn 1855 kernel/trace/trace_kprobe.c pr_warn("error on getting probe file.\n"); pr_warn 1864 kernel/trace/trace_kprobe.c pr_warn("error on deleting a probe.\n"); pr_warn 1870 kernel/trace/trace_kprobe.c pr_warn("error on deleting a probe.\n"); pr_warn 1877 kernel/trace/trace_kprobe.c pr_warn("error on cleaning up probes.\n"); pr_warn 146 kernel/trace/trace_mmiotrace.c pr_warn("mmiotrace has lost events\n"); pr_warn 289 kernel/trace/trace_stat.c pr_warn("Could not create tracefs 'trace_stat' entry\n"); pr_warn 482 kernel/trace/trace_uprobe.c pr_warn("Reference counter offset mismatch."); pr_warn 517 kernel/trace/trace_uprobe.c pr_warn("Failed to register probe event(%d)\n", ret); pr_warn 538 kernel/tracepoint.c pr_warn("Failed to register tracepoint module enter notifier\n"); pr_warn 1376 kernel/workqueue.c pr_warn("workqueue: round-robin CPU selection forced, expect performance impact\n"); pr_warn 2964 kernel/workqueue.c pr_warn("workqueue %s: drain_workqueue() isn't complete after %u tries\n", pr_warn 4124 kernel/workqueue.c pr_warn("workqueue: allocation failed while updating NUMA affinity of \"%s\"\n", pr_warn 4191 kernel/workqueue.c pr_warn("workqueue: max_active %d requested for %s is out of range, clamping between %d and %d\n", pr_warn 5870 kernel/workqueue.c pr_warn("workqueue: NUMA node mapping not available for cpu%d, disabling NUMA support\n", cpu); pr_warn 702 lib/crc32test.c pr_warn("crc32c: %d self tests failed\n", errors); pr_warn 739 lib/crc32test.c pr_warn("crc32c_combine: %d/%d self tests failed\n", errors, runs); pr_warn 792 lib/crc32test.c pr_warn("crc32: %d self tests failed\n", errors); pr_warn 829 lib/crc32test.c pr_warn("crc32_combine: %d/%d self tests failed\n", errors, runs); pr_warn 449 lib/debugobjects.c pr_warn("Out of memory. ODEBUG disabled\n"); pr_warn 522 lib/debugobjects.c pr_warn("object %p is on stack %p, but NOT annotated.\n", addr, pr_warn 525 lib/debugobjects.c pr_warn("object %p is NOT on stack %p, but annotated.\n", addr, pr_warn 1377 lib/debugobjects.c pr_warn("out of memory.\n"); pr_warn 682 lib/dynamic_debug.c pr_warn("ddebug boot param string too large\n"); pr_warn 705 lib/dynamic_debug.c pr_warn("expected <%d bytes into control\n", USER_BUF_PAGE); pr_warn 1017 lib/dynamic_debug.c pr_warn("_ddebug table is empty in a CONFIG_DYNAMIC_DEBUG build\n"); pr_warn 1050 lib/dynamic_debug.c pr_warn("ddebug_query param name is deprecated, change it to dyndbg\n"); pr_warn 1053 lib/dynamic_debug.c pr_warn("Invalid ddebug boot param %s\n", pr_warn 125 lib/earlycpio.c pr_warn( pr_warn 802 lib/kobject.c pr_warn("%s: kobject_add error: %d\n", __func__, retval); pr_warn 227 lib/kobject_uevent.c pr_warn("synth uevent: %s: %s\n", pr_warn 79 lib/logic_pio.c pr_warn("Requested IO range too big, new size set to 64K\n"); pr_warn 94 lib/nmi_backtrace.c pr_warn("NMI backtrace for cpu %d skipped: idling at %pS\n", pr_warn 97 lib/nmi_backtrace.c pr_warn("NMI backtrace for cpu %d\n", cpu); pr_warn 440 lib/random32.c pr_warn("prandom: seed boundary self test failed\n"); pr_warn 461 lib/random32.c pr_warn("prandom: %d/%d self tests failed\n", errors, runs); pr_warn 344 lib/reed_solomon/test_rslib.c pr_warn(" FAIL: %d decoding failures!\n", retval); pr_warn 437 lib/reed_solomon/test_rslib.c pr_warn(" FAIL: %d silent failures!\n", stat.noncw); pr_warn 502 lib/reed_solomon/test_rslib.c pr_warn("rslib: test failed\n"); pr_warn 22 lib/test-string_helpers.c pr_warn("Test '%s' failed: flags = %u\n", name, flags); pr_warn 271 lib/test-string_helpers.c pr_warn("Test '%s' failed: flags = %u, osz = 0, expected %d, got %d\n", pr_warn 350 lib/test-string_helpers.c pr_warn("Test 'test_string_get_size' failed!\n"); pr_warn 351 lib/test-string_helpers.c pr_warn("string_get_size(size = %llu, blk_size = %llu, units = %s)\n", pr_warn 353 lib/test-string_helpers.c pr_warn("expected: '%s', got '%s'\n", exp, res); pr_warn 18 lib/test_bitfield.c pr_warn("u" #tp "_encode_bits(" #v ", " #field ") is 0x%llx != " #res "\n",\ pr_warn 33 lib/test_bitfield.c pr_warn("le" #tp "_encode_bits(" #v ", " #field ") is 0x%llx != 0x%llx\n",\ pr_warn 49 lib/test_bitfield.c pr_warn("be" #tp "_encode_bits(" #v ", " #field ") is 0x%llx != 0x%llx\n",\ pr_warn 142 lib/test_bitfield.c pr_warn("constant tests failed!\n"); pr_warn 148 lib/test_bitfield.c pr_warn("variable tests failed!\n"); pr_warn 44 lib/test_bitmap.c pr_warn("[%s:%u] bitmaps contents differ: expected \"%*pbl\", got \"%*pbl\"\n", pr_warn 59 lib/test_bitmap.c pr_warn("[%s:%u] expected \"%s\", got \"%s\"\n", pr_warn 77 lib/test_bitmap.c pr_warn("[%s:%u] array length differ: expected %u, got %u\n", pr_warn 84 lib/test_bitmap.c pr_warn("[%s:%u] array contents differ\n", srcfile, line); pr_warn 76 lib/test_blackhole_dev.c pr_warn("dev_queue_xmit() returned NET_XMIT_SUCCESS\n"); pr_warn 79 lib/test_blackhole_dev.c pr_warn("dev_queue_xmit() returned NET_XMIT_DROP\n"); pr_warn 82 lib/test_blackhole_dev.c pr_warn("dev_queue_xmit() returned NET_XMIT_CN\n"); pr_warn 93 lib/test_blackhole_dev.c pr_warn("test_blackholedev module terminating.\n"); pr_warn 948 lib/test_firmware.c pr_warn("interface ready\n"); pr_warn 964 lib/test_firmware.c pr_warn("removed interface\n"); pr_warn 19 lib/test_module.c pr_warn("Hello, world\n"); pr_warn 28 lib/test_module.c pr_warn("Goodbye\n"); pr_warn 224 lib/test_overflow.c pr_warn("expected "fmt" "sym" "fmt \ pr_warn 230 lib/test_overflow.c pr_warn("expected "fmt" "sym" "fmt" == " \ pr_warn 304 lib/test_overflow.c pr_warn("expected (%s)(%s << %s) to%s overflow\n", \ pr_warn 308 lib/test_overflow.c pr_warn("expected (%s)(%s << %s) == %s\n", \ pr_warn 311 lib/test_overflow.c pr_warn("got %lld\n", (s64)__d); \ pr_warn 313 lib/test_overflow.c pr_warn("got %llu\n", (u64)__d); \ pr_warn 511 lib/test_overflow.c pr_warn(#func " failed regular allocation?!\n"); \ pr_warn 520 lib/test_overflow.c pr_warn(#func " unexpectedly failed bad wrapping?!\n"); \ pr_warn 529 lib/test_overflow.c pr_warn(#func " missed saturation!\n"); \ pr_warn 567 lib/test_overflow.c pr_warn("Cannot register test device\n"); pr_warn 600 lib/test_overflow.c pr_warn("FAIL!\n"); pr_warn 51 lib/test_printf.c pr_warn("vsnprintf(buf, %d, \"%s\", ...) returned %d, expected %d\n", pr_warn 57 lib/test_printf.c pr_warn("vsnprintf(buf, %d, \"%s\", ...) wrote before buffer\n", bufsize, fmt); pr_warn 63 lib/test_printf.c pr_warn("vsnprintf(buf, 0, \"%s\", ...) wrote to buffer\n", pr_warn 72 lib/test_printf.c pr_warn("vsnprintf(buf, %d, \"%s\", ...) did not nul-terminate buffer\n", pr_warn 78 lib/test_printf.c pr_warn("vsnprintf(buf, %d, \"%s\", ...) wrote beyond the nul-terminator\n", pr_warn 84 lib/test_printf.c pr_warn("vsnprintf(buf, %d, \"%s\", ...) wrote '%s', expected '%.*s'\n", pr_warn 123 lib/test_printf.c pr_warn("kvasprintf(..., \"%s\", ...) returned '%s', expected '%s'\n", pr_warn 229 lib/test_printf.c pr_warn("crng possibly not yet initialized. plain 'p' buffer contains \"%s\"", pr_warn 269 lib/test_printf.c pr_warn("crng possibly not yet initialized. plain 'p' buffer contains \"%s\"", pr_warn 304 lib/test_printf.c pr_warn("plain 'p' does not appear to be hashed\n"); pr_warn 311 lib/test_printf.c pr_warn("hashing plain 'p' has unexpected format\n"); pr_warn 155 lib/test_rhashtable.c pr_warn("Test failed: Could not find key %u\n", key.id); pr_warn 158 lib/test_rhashtable.c pr_warn("Test failed: Unexpected entry found for key %u\n", pr_warn 163 lib/test_rhashtable.c pr_warn("Test failed: Lookup value mismatch %u!=%u\n", pr_warn 190 lib/test_rhashtable.c pr_warn("Test failed: rhashtable_walk_next() error: %ld\n", pr_warn 205 lib/test_rhashtable.c pr_warn("Test failed: Total count mismatch ^^^"); pr_warn 729 lib/test_rhashtable.c pr_warn("Test failed: Unable to initialize hashtable: %d\n", pr_warn 738 lib/test_rhashtable.c pr_warn("Test failed: return code %lld\n", time); pr_warn 774 lib/test_rhashtable.c pr_warn("Test failed: Unable to initialize hashtable: %d\n", pr_warn 802 lib/test_rhashtable.c pr_warn("Test failed: thread %d returned: %d\n", pr_warn 145 lib/test_stackinit.c pr_warn(#name " FAIL (uninit bytes: %d)\n", \ pr_warn 56 lib/test_strscpy.c pr_warn("expected (%d) is bigger than can possibly be returned (%d)", pr_warn 38 lib/test_user_copy.c pr_warn("[%d] " msg "\n", __LINE__, ##__VA_ARGS__); \ pr_warn 202 lib/test_user_copy.c pr_warn("Failed to allocate user memory\n"); pr_warn 58 mm/debug.c pr_warn("page:%px is uninitialized and poisoned", page); pr_warn 72 mm/debug.c pr_warn("page:%px refcount:%d mapcount:%d mapping:%px " pr_warn 78 mm/debug.c pr_warn("page:%px refcount:%d mapcount:%d mapping:%px index:%#lx\n", pr_warn 89 mm/debug.c pr_warn("%ps name:\"%pd\"\n", mapping->a_ops, dentry); pr_warn 91 mm/debug.c pr_warn("%ps\n", mapping->a_ops); pr_warn 95 mm/debug.c pr_warn("%sflags: %#lx(%pGp)\n", type, page->flags, &page->flags); pr_warn 103 mm/debug.c pr_warn("page dumped because: %s\n", reason); pr_warn 107 mm/debug.c pr_warn("page->mem_cgroup:%px\n", page->mem_cgroup); pr_warn 231 mm/debug.c pr_warn("Page struct poisoning disabled by kernel command line option 'vm_debug'\n"); pr_warn 479 mm/huge_memory.c pr_warn("transparent_hugepage= cannot parse, ignored\n"); pr_warn 2324 mm/hugetlb.c pr_warn("HugeTLB: allocating %lu of page size %s failed. Only allocated %lu hugepages.\n", pr_warn 3003 mm/hugetlb.c pr_warn("hugepagesz= specified twice, ignoring\n"); pr_warn 3030 mm/hugetlb.c pr_warn("hugepages = %s preceded by " pr_warn 3045 mm/hugetlb.c pr_warn("hugepages= specified twice without interleaving hugepagesz=, ignoring\n"); pr_warn 436 mm/internal.h pr_warn("mminit::" prefix " " fmt, ##arg); \ pr_warn 240 mm/kmemleak.c pr_warn(x); \ pr_warn 259 mm/kmemleak.c pr_warn(fmt, ##__VA_ARGS__); \ pr_warn 580 mm/kmemleak.c pr_warn("Cannot allocate a kmemleak_object structure\n"); pr_warn 1593 mm/kmemleak.c pr_warn("Failed to create the scan thread\n"); pr_warn 347 mm/memblock.c pr_warn("Could not allocate %pap bytes of mirrored memory\n", pr_warn 1375 mm/memblock.c pr_warn("Could not allocate %pap bytes of mirrored memory\n", pr_warn 1364 mm/memory_hotplug.c pr_warn("failed to isolate pfn %lx\n", pfn); pr_warn 1375 mm/memory_hotplug.c pr_warn("migrating pfn %lx failed ret:%d ", pr_warn 1414 mm/memory_hotplug.c pr_warn("movable_node parameter depends on CONFIG_HAVE_MEMBLOCK_NODE_MAP to work properly\n"); pr_warn 1642 mm/memory_hotplug.c pr_warn("removing memory fails, because memory [%pa-%pa] is onlined\n", pr_warn 1736 mm/memory_hotplug.c pr_warn("Unable to release resource <%pa-%pa> (%d)\n", pr_warn 2697 mm/mempolicy.c pr_warn("Unable to parse numa_balancing=\n"); pr_warn 895 mm/nommu.c pr_warn("MAP_SHARED not completely supported on !MMU\n"); pr_warn 1306 mm/nommu.c pr_warn("Attempt to share mismatched mappings\n"); pr_warn 1312 mm/nommu.c pr_warn("Allocation of vma for %lu byte allocation from process %d failed\n", pr_warn 1318 mm/nommu.c pr_warn("Allocation of vm region for %lu byte allocation from process %d failed\n", pr_warn 1502 mm/nommu.c pr_warn("munmap of memory not mmapped by process %d (%s): 0x%lx-0x%lx\n", pr_warn 454 mm/oom_kill.c pr_warn("%s invoked oom-killer: gfp_mask=%#x(%pGg), order=%d, oom_score_adj=%hd\n", pr_warn 458 mm/oom_kill.c pr_warn("COMPACTION is disabled!!!\n"); pr_warn 1101 mm/oom_kill.c pr_warn("Out of memory and no killable processes...\n"); pr_warn 3757 mm/page_alloc.c pr_warn("%s: %pV, mode:%#x(%pGg), nodemask=%*pbl", pr_warn 5478 mm/page_alloc.c pr_warn("Ignoring unsupported numa_zonelist_order value: %s\n", s); pr_warn 6785 mm/page_alloc.c pr_warn(" %s zone: %lu pages exceeds freesize %lu\n", pr_warn 7060 mm/page_alloc.c pr_warn("Could not find start_pfn for node %d\n", nid); pr_warn 7164 mm/page_alloc.c pr_warn("This configuration results in unmirrored kernel memory."); pr_warn 7861 mm/page_alloc.c pr_warn("min_free_kbytes is not updated to %d because user defined value %d is preferred\n", pr_warn 115 mm/percpu-km.c pr_warn("wasting %zu pages per chunk\n", pr_warn 1750 mm/percpu.c pr_warn("allocation failed, size=%zu align=%zu atomic=%d, %s\n", pr_warn 2485 mm/percpu.c pr_warn("unknown allocator %s specified\n", str); pr_warn 2755 mm/percpu.c pr_warn("max_distance=0x%lx too large for vmalloc space 0x%lx\n", pr_warn 2874 mm/percpu.c pr_warn("failed to allocate %s page for cpu%u\n", pr_warn 1329 mm/slab.c pr_warn("SLAB: Unable to allocate memory on node %d, gfp=%#x(%pGg)\n", pr_warn 1331 mm/slab.c pr_warn(" cache: %s, object size: %d, order: %d\n", pr_warn 1343 mm/slab.c pr_warn(" node %d: slabs: %ld/%ld, objs: %ld/%ld\n", pr_warn 2584 mm/slab.c pr_warn("Unexpected gfp: %#x (%pGg). Fixing up to gfp: %#x (%pGg). Fix your code!\n", pr_warn 525 mm/slab_common.c pr_warn("kmem_cache_create(%s) failed with error %d\n", pr_warn 1496 mm/slab_common.c pr_warn("excessive unreclaimable slab but cannot dump stats\n"); pr_warn 1701 mm/slub.c pr_warn("Unexpected gfp: %#x (%pGg). Fixing up to gfp: %#x (%pGg). Fix your code!\n", pr_warn 2011 mm/slub.c pr_warn("due to cpu change %d -> %d\n", pr_warn 2016 mm/slub.c pr_warn("due to cpu running other code. Event %ld->%ld\n", pr_warn 2019 mm/slub.c pr_warn("for unknown reason: actual=%lx was=%lx target=%lx\n", pr_warn 2416 mm/slub.c pr_warn("SLUB: Unable to allocate memory on node %d, gfp=%#x(%pGg)\n", pr_warn 2418 mm/slub.c pr_warn(" cache: %s, object size: %u, buffer size: %u, default order: %u, min order: %u\n", pr_warn 2423 mm/slub.c pr_warn(" %s debugging increased min order, use slub_debug=O to disable.\n", pr_warn 2435 mm/slub.c pr_warn(" node %d: slabs: %ld, objs: %ld, free: %ld\n", pr_warn 139 mm/sparse-vmemmap.c pr_warn("[%lx-%lx] potential offnode page_structs\n", pr_warn 2953 mm/swapfile.c pr_warn("Unable to handle swap header version %d\n", pr_warn 2965 mm/swapfile.c pr_warn("Empty swap-file\n"); pr_warn 2969 mm/swapfile.c pr_warn("Truncating oversized swap area, only using %luk out of %luk\n", pr_warn 2985 mm/swapfile.c pr_warn("Swap area shorter than signature indicates\n"); pr_warn 3056 mm/swapfile.c pr_warn("Empty swap-file\n"); pr_warn 1146 mm/vmalloc.c pr_warn("vmap allocation for size %lu failed: use vmalloc=<size> to increase size\n", pr_warn 1783 mm/vmstat.c pr_warn("%s: %s %ld\n", pr_warn 1792 mm/vmstat.c pr_warn("%s: %s %ld\n", pr_warn 576 mm/zsmalloc.c pr_warn("debugfs not available, stat dir not created\n"); pr_warn 652 mm/zsmalloc.c pr_warn("no root stat dir, not creating <%s> stat dir\n", name); pr_warn 1337 mm/zswap.c pr_warn("debugfs initialization failed\n"); pr_warn 363 net/8021q/vlan_core.c pr_warn("failed to kill vid %04x/%d for device %s\n", pr_warn 407 net/9p/client.c pr_warn("Packet with tag %d has still references", pr_warn 1462 net/9p/client.c pr_warn("%s (%d): Trying to clunk with NULL fid\n", pr_warn 1207 net/appletalk/ddp.c pr_warn("atalk_connect: %s is broken and did not set SO_BROADCAST.\n", pr_warn 390 net/atm/clip.c pr_warn("XOFF->XOFF transition\n"); pr_warn 453 net/atm/clip.c pr_warn("non-CLIP VCC\n"); pr_warn 299 net/atm/common.c pr_warn("AAL problems ... (%d)\n", aal); pr_warn 516 net/batman-adv/hard-interface.c pr_warn("The newly added mac address (%pM) already exists on: %s\n", pr_warn 518 net/batman-adv/hard-interface.c pr_warn("It is strongly recommended to keep mac addresses unique to avoid problems!\n"); pr_warn 1492 net/batman-adv/netlink.c pr_warn("unable to register netlink family"); pr_warn 80 net/batman-adv/send.c pr_warn("Interface %s is not up - can't send packet via that interface!\n", pr_warn 164 net/bluetooth/lib.c pr_warn("%pV", &vaf); pr_warn 391 net/caif/caif_dev.c pr_warn("Out of memory\n"); pr_warn 855 net/caif/caif_socket.c pr_warn("CAIF Interface MTU too small (%d)\n", dev->mtu); pr_warn 65 net/caif/caif_usb.c pr_warn("Headroom to small\n"); pr_warn 170 net/caif/caif_usb.c pr_warn("USB device uses more than one tx queue\n"); pr_warn 381 net/caif/cfcnfg.c pr_warn("received channel_id zero\n"); pr_warn 475 net/caif/cfcnfg.c pr_warn("Too many CAIF Link Layers (max 6)\n"); pr_warn 150 net/caif/cfctrl.c pr_warn("Requests are not received in order\n"); pr_warn 270 net/caif/cfctrl.c pr_warn("Request setup of bad link type = %d\n", pr_warn 487 net/caif/cfctrl.c pr_warn("Request setup, invalid type (%d)\n", pr_warn 158 net/caif/cfmuxl.c pr_warn("Trying to remove control layer\n"); pr_warn 21 net/caif/cfpkt_skbuff.c pr_warn(errmsg); \ pr_warn 87 net/caif/cfsrvl.c pr_warn("Unexpected ctrl in cfsrvl (%d)\n", ctrl); pr_warn 73 net/caif/cfutill.c pr_warn("Unknown service control %d (0x%x)\n", cmd, cmd); pr_warn 69 net/caif/cfveil.c pr_warn("Unknown VEI control packet %d (0x%x)!\n", cmd, cmd); pr_warn 224 net/caif/chnl_net.c pr_warn("Size of skb exceeded MTU\n"); pr_warn 309 net/caif/chnl_net.c pr_warn("CAIF Interface MTU too small (%d)\n", mtu); pr_warn 445 net/caif/chnl_net.c pr_warn("no params data found\n"); pr_warn 474 net/caif/chnl_net.c pr_warn("device rtml registration failed\n"); pr_warn 309 net/can/j1939/socket.c pr_warn("skb clone failed\n"); pr_warn 333 net/ceph/ceph_common.c pr_warn("ceph: Mount failed due to key not found: %s\n", pr_warn 337 net/ceph/ceph_common.c pr_warn("ceph: Mount failed due to expired key: %s\n", pr_warn 341 net/ceph/ceph_common.c pr_warn("ceph: Mount failed due to revoked key: %s\n", pr_warn 345 net/ceph/ceph_common.c pr_warn("ceph: Mount failed due to unknown key error %d: %s\n", pr_warn 484 net/ceph/ceph_common.c pr_warn("ignoring deprecated osdtimeout option\n"); pr_warn 2028 net/ceph/messenger.c pr_warn("wrong peer, want %s/%d, got %s/%d\n", pr_warn 2864 net/ceph/messenger.c pr_warn("%s con %p unrecognized state %lu\n", pr_warn 2989 net/ceph/messenger.c pr_warn("%s%lld %s %s\n", ENTITY_NAME(con->peer_name), pr_warn 1328 net/ceph/mon_client.c pr_warn("mon_alloc_msg front %d > prealloc %d (%u#%llu)\n", pr_warn 3395 net/ceph/osd_client.c pr_warn("got v %d < 3 cv %d of ceph_object_locator\n", pr_warn 3400 net/ceph/osd_client.c pr_warn("got v %d cv %d > 6 of ceph_object_locator\n", pr_warn 3413 net/ceph/osd_client.c pr_warn("ceph_object_locator::key is set\n"); pr_warn 3433 net/ceph/osd_client.c pr_warn("ceph_object_locator::nspace is changed\n"); pr_warn 3441 net/ceph/osd_client.c pr_warn("ceph_object_locator::hash is set\n"); pr_warn 3468 net/ceph/osd_client.c pr_warn("got v %d cv %d > 1 of ceph_request_redirect\n", pr_warn 3482 net/ceph/osd_client.c pr_warn("ceph_request_redirect::object_name is set\n"); pr_warn 5473 net/ceph/osd_client.c pr_warn("%s osd%d tid %llu front %d > preallocated %d\n", pr_warn 5485 net/ceph/osd_client.c pr_warn("%s osd%d tid %llu data %d > preallocated %zu, skipping\n", pr_warn 5546 net/ceph/osd_client.c pr_warn("%s osd%d unknown msg type %d, skipping\n", __func__, pr_warn 739 net/ceph/osdmap.c pr_warn("got v %d < 5 cv %d of ceph_pg_pool\n", ev, cv); pr_warn 743 net/ceph/osdmap.c pr_warn("got v %d cv %d > 9 of ceph_pg_pool\n", ev, cv); pr_warn 1106 net/ceph/osdmap.c pr_warn("got v %d cv %d > %d of %s ceph_osdmap\n", pr_warn 1116 net/ceph/osdmap.c pr_warn("got v %d cv %d > %d of %s ceph_osdmap client data\n", pr_warn 1128 net/ceph/osdmap.c pr_warn("got v %d < 6 of %s ceph_osdmap\n", pr_warn 361 net/core/dev.c pr_warn("dev_remove_pack: %p not found\n", pt); pr_warn 441 net/core/dev.c pr_warn("dev_remove_offload: %p not found\n", po); pr_warn 2023 net/core/dev.c pr_warn("Number of in use tx queues changed invalidating tc mappings. Priority traffic classification disabled!\n"); pr_warn 2034 net/core/dev.c pr_warn("Number of in use tx queues changed. Priority %i to tc mapping %i is no longer valid. Setting map to 0\n", pr_warn 7664 net/core/dev.c pr_warn("%s: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken.\n", pr_warn 7735 net/core/dev.c pr_warn("%s: allmulti touches roof, set allmulti failed. allmulti feature of device might be broken.\n", pr_warn 52 net/core/hwbm.c pr_warn("pool already filled\n"); pr_warn 58 net/core/hwbm.c pr_warn("cannot allocate %d buffers for pool\n", pr_warn 65 net/core/hwbm.c pr_warn("Adding %d buffers to the %d current buffers will overflow\n", pr_warn 835 net/core/neighbour.c pr_warn("Destroying alive neighbour %p\n", neigh); pr_warn 841 net/core/neighbour.c pr_warn("Impossible event\n"); pr_warn 75 net/core/page_pool.c pr_warn("%s() gave up with errno %d\n", __func__, err); pr_warn 397 net/core/page_pool.c pr_warn("%s() stalled pool shutdown %d inflight %d sec\n", pr_warn 872 net/core/pktgen.c pr_warn("wrong command format\n"); pr_warn 879 net/core/pktgen.c pr_warn("illegal format\n"); pr_warn 2039 net/core/pktgen.c pr_warn("WARNING: Requested queue_map_min (zero-based) (%d) exceeds valid range [0 - %d] for (%d) queues on %s, resetting\n", pr_warn 2045 net/core/pktgen.c pr_warn("WARNING: Requested queue_map_max (zero-based) (%d) exceeds valid range [0 - %d] for (%d) queues on %s, resetting\n", pr_warn 3177 net/core/pktgen.c pr_warn("interface: %s is already stopped\n", pr_warn 3754 net/core/pktgen.c pr_warn("WARNING: trying to remove a running interface, stopping it now\n"); pr_warn 3794 net/core/pktgen.c pr_warn("cannot create /proc/net/%s\n", PG_PROC_DIR); pr_warn 3809 net/core/pktgen.c pr_warn("Cannot create thread for cpu %d (%d)\n", pr_warn 423 net/core/sock.c pr_warn("process `%s' is using obsolete %s SO_BSDCOMPAT\n", pr_warn 283 net/core/sysctl_net_core.c pr_warn("bpf_jit_enable = 2 was set! NEVER use this in production, only for JIT debugging!\n"); pr_warn 418 net/core/utils.c pr_warn("unexpected address family %u\n", addr->sa_family); pr_warn 228 net/dsa/dsa2.c pr_warn("Tree has no master device\n"); pr_warn 73 net/ieee802154/socket.c pr_warn("Unsupported ieee802154 address type: %d\n", pr_warn 1111 net/ipv4/fib_frontend.c pr_warn("%s: bug: prim == NULL\n", __func__); pr_warn 1196 net/ipv4/fib_frontend.c pr_warn("%s: bug: prim == NULL\n", __func__); pr_warn 1200 net/ipv4/fib_frontend.c pr_warn("%s: bug: iprim != prim\n", __func__); pr_warn 251 net/ipv4/fib_semantics.c pr_warn("Freeing alive fib_info %p\n", fi); pr_warn 235 net/ipv4/ipconfig.c pr_warn("DHCP/BOOTP: Ignoring device %s, MTU %d too small\n", pr_warn 838 net/ipv4/ipconfig.c pr_warn("Unknown ARP type 0x%04x for device %s\n", dev->type, pr_warn 1780 net/ipv4/ipconfig.c pr_warn("DHCP: vendorclass too long, truncated to \"%s\"\n", pr_warn 1768 net/ipv4/route.c pr_warn("martian source %pI4 from %pI4, on dev %s\n", pr_warn 153 net/ipv4/tcp_input.c pr_warn("%s: Driver has suspect GRO implementation, TCP performance may be compromised.\n", pr_warn 964 net/ipv6/addrconf.c pr_warn("Freeing alive inet6 address %p\n", ifp); pr_warn 1344 net/ipv6/addrconf.c pr_warn("%s: regeneration time exceeded - disabled temporary address support\n", pr_warn 6013 net/ipv6/addrconf.c pr_warn("BUG: Address %pI6c on device %s is missing its host route.\n", pr_warn 252 net/ipv6/addrconf_core.c pr_warn("Freeing alive inet6 device %p\n", idev); pr_warn 719 net/ipv6/ip6_fib.c pr_warn("Can't replace route, no match found\n"); pr_warn 722 net/ipv6/ip6_fib.c pr_warn("NLM_F_CREATE should be set when creating new route\n"); pr_warn 773 net/ipv6/ip6_fib.c pr_warn("Can't replace route, no match found\n"); pr_warn 776 net/ipv6/ip6_fib.c pr_warn("NLM_F_CREATE should be set when creating new route\n"); pr_warn 1146 net/ipv6/ip6_fib.c pr_warn("NLM_F_CREATE should be set when creating new route\n"); pr_warn 1194 net/ipv6/ip6_fib.c pr_warn("NLM_F_REPLACE set, but no existing node found!\n"); pr_warn 1320 net/ipv6/ip6_fib.c pr_warn("RTM_NEWROUTE with no NLM_F_CREATE or NLM_F_REPLACE\n"); pr_warn 996 net/ipv6/ip6_tunnel.c pr_warn("%s xmit: Local address not yet configured!\n", pr_warn 1002 net/ipv6/ip6_tunnel.c pr_warn("%s xmit: Routing loop! Remote address found on this node!\n", pr_warn 1829 net/ipv6/ndisc.c pr_warn("process `%s' is using deprecated sysctl (%s) net.ipv6.neigh.%s.%s - use net.ipv6.neigh.%s.%s_ms instead\n", pr_warn 3634 net/ipv6/route.c pr_warn("NLM_F_CREATE should be specified when creating new route\n"); pr_warn 501 net/iucv/iucv.c pr_warn("Defining an interrupt buffer on CPU %i failed with 0x%02x (%s)\n", pr_warn 1820 net/iucv/iucv.c pr_warn("iucv_external_interrupt: out of memory\n"); pr_warn 1963 net/iucv/iucv.c pr_warn("Suspending Linux did not completely close all IUCV connections\n"); pr_warn 735 net/kcm/kcmsock.c pr_warn("KCM: Hard failure on kcm_write_msgs %d\n", err); pr_warn 872 net/kcm/kcmsock.c pr_warn("KCM: Hard failure on kcm_write_msgs\n"); pr_warn 1043 net/kcm/kcmsock.c pr_warn("KCM: Hard failure on kcm_write_msgs\n"); pr_warn 328 net/l2tp/l2tp_core.h l2tp_printk(ptr, type, pr_warn, fmt, ##__VA_ARGS__) pr_warn 863 net/mac80211/util.c pr_warn("queueing ieee80211 work while going to suspend\n"); pr_warn 106 net/netfilter/ipset/ip_set_core.c pr_warn("Can't find ip_set type %s\n", name); pr_warn 201 net/netfilter/ipset/ip_set_core.c pr_warn("ip_set type %s, family %s, revision %u:%u uses wrong protocol version %u (want %u)\n", pr_warn 211 net/netfilter/ipset/ip_set_core.c pr_warn("ip_set type %s, family %s with revision min %u already registered!\n", pr_warn 233 net/netfilter/ipset/ip_set_core.c pr_warn("ip_set type %s, family %s with revision min %u not registered\n", pr_warn 673 net/netfilter/ipset/ip_set_hash_gen.h pr_warn("Cannot increase the hashsize of set %s further\n", pr_warn 1029 net/netfilter/ipset/ip_set_hash_gen.h pr_warn("Set %s is full, maxelem %u reached\n", pr_warn 1409 net/netfilter/ipset/ip_set_hash_gen.h pr_warn("Can't list set %s: one bucket does not fit into a message. Please report it!\n", pr_warn 123 net/netfilter/xt_connbytes.c pr_warn("Forcing CT accounting to be enabled\n"); pr_warn 1309 net/netfilter/xt_hashlimit.c pr_warn("unable to create slab cache\n"); pr_warn 214 net/netlink/af_netlink.c pr_warn("__netlink_remove_tap: %p not found\n", nt); pr_warn 1424 net/openvswitch/actions.c pr_warn("%s: deferred action limit reached, drop sample action\n", pr_warn 1427 net/openvswitch/actions.c pr_warn("%s: deferred action limit reached, drop recirc action\n", pr_warn 79 net/rds/ib_fmr.c pr_warn("RDS/IB: %s failed (err=%d)\n", __func__, err); pr_warn 114 net/rds/ib_fmr.c pr_warn("RDS/IB: %s failed!\n", __func__); pr_warn 239 net/rds/ib_fmr.c pr_warn("RDS/IB: FMR invalidation failed (err=%d)\n", ret); pr_warn 81 net/rds/ib_frmr.c pr_warn("RDS/IB: %s failed to allocate MR", __func__); pr_warn 171 net/rds/ib_frmr.c pr_warn("RDS/IB: %s returned error(%d)\n", pr_warn 211 net/rds/ib_frmr.c pr_warn("RDS/IB: %s failed!\n", __func__); pr_warn 375 net/rds/ib_frmr.c pr_warn("RDS/IB: %s failed (err=%d)\n", __func__, ret); pr_warn 558 net/rds/ib_rdma.c pr_warn("RDS/IB: rds_ib_get_mr failed (errno=%d)\n", ret); pr_warn 317 net/rds/message.c pr_warn("rds: alloc sgs failed! nents <= 0\n"); pr_warn 322 net/rds/message.c pr_warn("rds: alloc sgs failed! total %d used %d nents %d\n", pr_warn 125 net/rds/rdma_transport.c pr_warn("RDS/RDMA: conn <%pI6c, %pI6c> rejected, dropping connection\n", pr_warn 554 net/rds/tcp.c pr_warn("could not set allocate sysctl table\n"); pr_warn 563 net/rds/tcp.c pr_warn("could not register sysctl\n"); pr_warn 574 net/rds/tcp.c pr_warn("could not set up IPv6 listen sock\n"); pr_warn 687 net/rds/tcp.c pr_warn("Invalid input. Must be >= %d\n", pr_warn 156 net/rds/tcp_send.c pr_warn("RDS/tcp: send to %pI6c on cp [%d]" pr_warn 157 net/rose/rose_link.c pr_warn("ROSE: received diagnostic #%d - %3ph\n", skb->data[3], pr_warn 587 net/sched/sch_api.c pr_warn("%s: %s qdisc %X: is non-work-conserving?\n", pr_warn 903 net/sched/sch_cbq.c pr_warn("CBQ: class %08x has bad quantum==%ld, repaired.\n", pr_warn 271 net/sched/sch_cbs.c pr_warn("Couldn't disable CBS offload for queue %d\n", pr_warn 322 net/sched/sch_dsmark.c pr_warn("%s: unsupported protocol %d\n", pr_warn 315 net/sched/sch_etf.c pr_warn("Couldn't disable ETF offload for queue %d\n", pr_warn 463 net/sched/sch_gred.c pr_warn("GRED: Warning: Destroying shadowed VQ 0x%x\n", pr_warn 731 net/sched/sch_htb.c pr_warn("htb: too many events!\n"); pr_warn 1487 net/sched/sch_htb.c pr_warn("HTB: quantum of class %X is %s. Consider r2q change.\n", pr_warn 104 net/sctp/objcnt.c pr_warn("sctp_dbg_objcnt: Unable to create /proc entry.\n"); pr_warn 1226 net/sctp/sm_sideeffect.c pr_warn("unimplemented feature in state %d, event_type %d, event_id %d\n", pr_warn 1776 net/sctp/sm_sideeffect.c pr_warn("Impossible command: %u\n", pr_warn 56 net/sctp/sm_statetable.c pr_warn("table %p possible attack: event %d exceeds max %d\n", \ pr_warn 2700 net/sunrpc/clnt.c pr_warn("RPC: server %s requires stronger authentication.\n", pr_warn 274 net/sunrpc/xprtrdma/backchannel.c pr_warn("RPC/RDMA backchannel overflow\n"); pr_warn 1057 net/sunrpc/xprtrdma/rpc_rdma.c pr_warn("RPC/RDMA short backward direction call\n"); pr_warn 433 net/sunrpc/xprtrdma/svc_rdma_transport.c pr_warn("svcrdma: reducing receive depth to %d\n", pr_warn 444 net/sunrpc/xprtrdma/svc_rdma_transport.c pr_warn("svcrdma: reducing send depth to %d\n", pr_warn 491 net/sunrpc/xprtrdma/verbs.c pr_warn("rpcrdma: HCA provides only %d send SGEs\n", max_sge); pr_warn 281 net/tipc/bearer.c pr_warn("Bearer <%s>: already 2 bearers with priority %u\n", pr_warn 287 net/tipc/bearer.c pr_warn("Bearer <%s>: trying with adjusted priority\n", name); pr_warn 339 net/tipc/bearer.c pr_warn("Enabling of bearer <%s> rejected, %s\n", name, errstr); pr_warn 405 net/tipc/bearer.c pr_warn("Failed to obtain node identity\n"); pr_warn 131 net/tipc/discover.c pr_warn("Duplicate %x using %s seen on <%s>\n", node_addr, pr_warn 842 net/tipc/group.c pr_warn("Received unknown GROUP_PROTO message\n"); pr_warn 956 net/tipc/link.c pr_warn("Too large msg, purging xmit list %d %d %d %d %d!\n", pr_warn 966 net/tipc/link.c pr_warn("%s<%s>, link overflow", link_rst_msg, l->name); pr_warn 1094 net/tipc/link.c pr_warn("Retransmission failure on link <%s>\n", l->name); pr_warn 1208 net/tipc/link.c pr_warn("Dropping received illegal msg type\n"); pr_warn 1370 net/tipc/link.c pr_warn("Unexpected skb in deferdq!\n"); pr_warn 1695 net/tipc/link.c pr_warn("%sunable to create tunnel packet\n", link_co_err); pr_warn 1739 net/tipc/link.c pr_warn("%sunable to create tunnel packet\n", link_co_err); pr_warn 1757 net/tipc/link.c pr_warn("%sunable to create dummy SYNCH_MSG\n", pr_warn 1803 net/tipc/link.c pr_warn("%sunable to frag msg: rc %d\n", pr_warn 1824 net/tipc/link.c pr_warn("%sunable to send packet\n", link_co_err); pr_warn 1851 net/tipc/link.c pr_warn("Link failover deferdq not empty: %d!\n", pr_warn 1887 net/tipc/link.c pr_warn("Link failover deferdq not empty: %d!\n", pr_warn 418 net/tipc/monitor.c pr_warn("Mon: unknown link %x/%u DOWN\n", addr, bearer_id); pr_warn 694 net/tipc/msg.c pr_warn("Failed do assemble buffer\n"); pr_warn 733 net/tipc/msg.c pr_warn("Failed do clone local mcast rcv buffer\n"); pr_warn 475 net/tipc/msg.h pr_warn("Trying to set illegal importance in message\n"); pr_warn 102 net/tipc/name_distr.c pr_warn("Publication distribution failure\n"); pr_warn 128 net/tipc/name_distr.c pr_warn("Withdrawal distribution failure\n"); pr_warn 159 net/tipc/name_distr.c pr_warn("Bulk publication failure\n"); pr_warn 293 net/tipc/name_distr.c pr_warn("Unrecognized name table message received\n"); pr_warn 125 net/tipc/name_table.c pr_warn("Service creation failed, no memory\n"); pr_warn 258 net/tipc/name_table.c pr_warn("Failed to bind to %u,%u,%u, no memory\n", type, lower, upper); pr_warn 622 net/tipc/name_table.c pr_warn("Bind failed, max limit %u reached\n", TIPC_MAX_PUBL); pr_warn 694 net/tipc/name_table.c pr_warn("Failed to subscribe for {%u,%u,%u}\n", type, pr_warn 396 net/tipc/node.c pr_warn("Node creation failed, no memory\n"); pr_warn 428 net/tipc/node.c pr_warn("Broadcast rcv link creation failed, no memory\n"); pr_warn 502 net/tipc/node.c pr_warn("Node subscribe rejected, unknown node 0x%x\n", addr); pr_warn 520 net/tipc/node.c pr_warn("Node unsubscribe rejected, unknown node 0x%x\n", addr); pr_warn 540 net/tipc/node.c pr_warn("Connecting sock to node 0x%x failed\n", dnode); pr_warn 1133 net/tipc/node.c pr_warn("Resetting all links to %x\n", n->addr); pr_warn 458 net/tipc/socket.c pr_warn("Socket create failed; port number exhausted\n"); pr_warn 1196 net/tipc/socket.c pr_warn("Failed to clone mcast rcv buffer\n"); pr_warn 1264 net/tipc/socket.c pr_warn("Received unknown CONN_PROTO msg\n"); pr_warn 140 net/tipc/subscr.c pr_warn("Subscription rejected, illegal request\n"); pr_warn 145 net/tipc/subscr.c pr_warn("Subscription rejected, no memory\n"); pr_warn 372 net/tipc/topsrv.c pr_warn("Subscription rejected, max (%u)\n", TIPC_MAX_SUBSCR); pr_warn 709 net/tipc/udp_media.c pr_warn("Failed to set node id, please configure manually\n"); pr_warn 55 net/tipc/udp_media.h pr_warn("MTU too low for tipc bearer\n"); pr_warn 47 net/vmw_vsock/af_vsock_tap.c pr_warn("vsock_remove_tap: %p not found\n", vt); pr_warn 481 net/wireless/lib80211_crypt_tkip.c pr_warn("%s(): tfm_michael == NULL\n", __func__); pr_warn 52 net/x25/x25_forward.c pr_warn("call request for lci which is already registered!, transmitting but not registering new pair\n"); pr_warn 326 net/x25/x25_in.c pr_warn("unknown %02X in state 3\n", frametype); pr_warn 93 net/x25/x25_link.c pr_warn("diagnostic #%d - %02X %02X %02X\n", pr_warn 99 net/x25/x25_link.c pr_warn("received unknown %02X with LCI 000\n", pr_warn 717 security/integrity/ima/ima_main.c pr_warn("Couldn't register LSM notifier, error %d\n", error); pr_warn 294 security/integrity/ima/ima_policy.c pr_warn("rule for LSM \'%s\' is undefined\n", pr_warn 633 security/integrity/ima/ima_policy.c pr_warn("Skipping unknown architecture policy rule: %s\n", pr_warn 827 security/integrity/ima/ima_policy.c pr_warn("rule for LSM \'%s\' is undefined\n", pr_warn 91 security/safesetid/lsm.c pr_warn("Operation requires CAP_SETUID, which is not available to UID %u for operations besides approved set*uid transitions\n", pr_warn 116 security/safesetid/lsm.c pr_warn("UID transition ((%d,%d,%d) -> %d) blocked\n", pr_warn 93 security/safesetid/securityfs.c pr_warn("insecure policy detected: uid %d is constrained but transitively unconstrained through uid %d\n", pr_warn 157 security/safesetid/securityfs.c pr_warn("bad policy: duplicate entry\n"); pr_warn 581 security/selinux/avc.c pr_warn("SELinux: avc: seqno %d < latest_notif %d\n", pr_warn 551 security/selinux/hooks.c pr_warn("SELinux: (dev %s, type %s) has no " pr_warn 560 security/selinux/hooks.c pr_warn("SELinux: (dev %s, type " pr_warn 564 security/selinux/hooks.c pr_warn("SELinux: (dev %s, type " pr_warn 636 security/selinux/hooks.c pr_warn("SELinux: security_context_str_to_sid" pr_warn 670 security/selinux/hooks.c pr_warn("SELinux: Unable to set superblock options " pr_warn 770 security/selinux/hooks.c pr_warn("%s: security_fs_use(%s) returned %d\n", pr_warn 856 security/selinux/hooks.c pr_warn("SELinux: defcontext option is " pr_warn 878 security/selinux/hooks.c pr_warn("SELinux: mount invalid. Same superblock, different " pr_warn 908 security/selinux/hooks.c pr_warn("SELinux: mount invalid. Same superblock, " pr_warn 1034 security/selinux/hooks.c pr_warn(SEL_MOUNT_FAIL_MSG); pr_warn 1404 security/selinux/hooks.c pr_warn("SELinux: %s: getxattr returned %d for dev=%s ino=%ld\n", pr_warn 1422 security/selinux/hooks.c pr_warn("SELinux: %s: context_to_sid(%s) returned %d for dev=%s ino=%ld\n", pr_warn 1892 security/selinux/hooks.c pr_warn("SELinux: %s: unrecognized kind %d\n", pr_warn 2728 security/selinux/hooks.c pr_warn("SELinux: unable to change security options " pr_warn 4389 security/selinux/hooks.c pr_warn( pr_warn 4432 security/selinux/hooks.c pr_warn( pr_warn 145 security/selinux/netif.c pr_warn("SELinux: failure in %s(), invalid network interface (%d)\n", pr_warn 173 security/selinux/netif.c pr_warn("SELinux: failure in %s(), unable to determine network interface label (%d)\n", pr_warn 231 security/selinux/netnode.c pr_warn("SELinux: failure in %s(), unable to determine network node label\n", pr_warn 166 security/selinux/netport.c pr_warn("SELinux: failure in %s(), unable to determine network port label\n", pr_warn 1854 security/selinux/ss/policydb.c pr_warn("SELinux: rangetrans: invalid range\n"); pr_warn 639 security/selinux/ss/services.c pr_warn("SELinux: Invalid class %hu\n", tclass); pr_warn 1907 security/selinux/ss/services.c pr_warn("SELinux: Context %s would be invalid if enforcing\n", pr_warn 628 security/smack/smack_lsm.c pr_warn("Smack: duplicate mount options\n"); pr_warn 968 security/tomoyo/common.c pr_warn("%s ( %s ) is not permitted to update policies.\n", pr_warn 853 security/tomoyo/domain.c pr_warn("ERROR: Domain '%s' not ready.\n", ee->tmp); pr_warn 864 security/tomoyo/domain.c pr_warn("ERROR: Domain '%s' not defined.\n", ee->tmp); pr_warn 24 security/tomoyo/memory.c pr_warn("ERROR: Out of memory at %s.\n", function); pr_warn 1082 security/tomoyo/util.c pr_warn("WARNING: Domain '%s' has too many ACLs to hold. Stopped learning mode.\n", pr_warn 264 sound/core/control.c pr_warn("ALSA: Control name '%s' truncated to '%s'\n", pr_warn 52 sound/core/pcm_memory.c pr_warn("ALSA pcmC%dD%d%c,%d:%s: cannot preallocate for size %zu\n", pr_warn 297 sound/core/seq/seq_clientmgr.c pr_warn("ALSA: seq: Trying to free unused client %d\n", pr_warn 17 sound/core/seq/seq_lock.c pr_warn("ALSA: seq_lock: lock trouble [counter = %d] in %s:%d\n", atomic_read(lockp), file, line); pr_warn 22 sound/core/seq/seq_lock.c pr_warn("ALSA: seq_lock: waiting [%d left] in %s:%d\n", atomic_read(lockp), file, line); pr_warn 124 sound/core/seq/seq_ports.c pr_warn("ALSA: seq: too many ports for client %d\n", client->number); pr_warn 967 sound/core/timer.c pr_warn("ALSA: timer %p is busy?\n", timer); pr_warn 63 sound/soc/atmel/atmel-pcm-dma.c pr_warn("atmel-pcm: buffer %s on %s (SSC_SR=%#x)\n", pr_warn 160 sound/soc/atmel/atmel-pcm-pdc.c pr_warn("atmel-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n", pr_warn 76 sound/soc/codecs/rl6231.c pr_warn("Base clock rate %d is too low\n", rate); pr_warn 88 sound/soc/codecs/rl6231.c pr_warn("Base clock rate %d is too high\n", rate); pr_warn 501 sound/soc/codecs/rt5514.c pr_warn("Base clock rate %d is too low\n", rate); pr_warn 354 sound/soc/codecs/wm8903.c pr_warn("DCS mode %d delay not set\n", dcs_mode); pr_warn 194 sound/usb/usx2y/usb_stream.c pr_warn("us122l: couldn't allocate read buffer\n"); pr_warn 213 sound/usb/usx2y/usb_stream.c pr_warn("us122l: couldn't allocate write buffer\n"); pr_warn 19 tools/testing/selftests/kselftest_module.h pr_warn("TC failed at %s:%d\n", __func__, __LINE__); \ pr_warn 29 tools/testing/selftests/kselftest_module.h pr_warn("failed %u out of %u tests\n", failed_tests, total_tests); pr_warn 323 tools/testing/selftests/powerpc/tm/tm-unavailable.c pr_warn(rc, "pthread_setname_np"); pr_warn 369 tools/testing/selftests/powerpc/tm/tm-unavailable.c pr_warn(rc, "pthread_create()"); pr_warn 606 virt/kvm/arm/vgic/vgic-v3.c pr_warn("GICV physical address 0x%llx not page aligned\n",