root/tools/bpf/bpf_dbg.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. __check_format_printf
  2. matches
  3. hex_dump
  4. bpf_prog_loaded
  5. bpf_disasm
  6. bpf_dump_curr
  7. bpf_dump_pkt
  8. bpf_disasm_all
  9. bpf_dump_all
  10. bpf_runnable
  11. bpf_reset_breakpoints
  12. bpf_set_breakpoints
  13. bpf_dump_breakpoints
  14. bpf_reset
  15. bpf_safe_regs
  16. bpf_restore_regs
  17. extract_u32
  18. extract_u16
  19. extract_u8
  20. set_return
  21. bpf_single_step
  22. bpf_pc_has_breakpoint
  23. bpf_handle_breakpoint
  24. bpf_run_all
  25. bpf_run_stepping
  26. pcap_loaded
  27. pcap_curr_pkt
  28. pcap_next_pkt
  29. pcap_reset_pkt
  30. try_load_pcap
  31. try_close_pcap
  32. cmd_load_bpf
  33. cmd_load_pcap
  34. cmd_load
  35. cmd_step
  36. cmd_select
  37. cmd_breakpoint
  38. cmd_run
  39. cmd_disassemble
  40. cmd_dump
  41. cmd_quit
  42. execf
  43. shell_comp_gen
  44. shell_completion
  45. intr_shell
  46. init_shell
  47. exit_shell
  48. run_shell_loop
  49. main

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Minimal BPF debugger
   4  *
   5  * Minimal BPF debugger that mimics the kernel's engine (w/o extensions)
   6  * and allows for single stepping through selected packets from a pcap
   7  * with a provided user filter in order to facilitate verification of a
   8  * BPF program. Besides others, this is useful to verify BPF programs
   9  * before attaching to a live system, and can be used in socket filters,
  10  * cls_bpf, xt_bpf, team driver and e.g. PTP code; in particular when a
  11  * single more complex BPF program is being used. Reasons for a more
  12  * complex BPF program are likely primarily to optimize execution time
  13  * for making a verdict when multiple simple BPF programs are combined
  14  * into one in order to prevent parsing same headers multiple times.
  15  *
  16  * More on how to debug BPF opcodes see Documentation/networking/filter.txt
  17  * which is the main document on BPF. Mini howto for getting started:
  18  *
  19  *  1) `./bpf_dbg` to enter the shell (shell cmds denoted with '>'):
  20  *  2) > load bpf 6,40 0 0 12,21 0 3 20... (output from `bpf_asm` or
  21  *     `tcpdump -iem1 -ddd port 22 | tr '\n' ','` to load as filter)
  22  *  3) > load pcap foo.pcap
  23  *  4) > run <n>/disassemble/dump/quit (self-explanatory)
  24  *  5) > breakpoint 2 (sets bp at loaded BPF insns 2, do `run` then;
  25  *       multiple bps can be set, of course, a call to `breakpoint`
  26  *       w/o args shows currently loaded bps, `breakpoint reset` for
  27  *       resetting all breakpoints)
  28  *  6) > select 3 (`run` etc will start from the 3rd packet in the pcap)
  29  *  7) > step [-<n>, +<n>] (performs single stepping through the BPF)
  30  *
  31  * Copyright 2013 Daniel Borkmann <borkmann@redhat.com>
  32  */
  33 
  34 #include <stdio.h>
  35 #include <unistd.h>
  36 #include <stdlib.h>
  37 #include <ctype.h>
  38 #include <stdbool.h>
  39 #include <stdarg.h>
  40 #include <setjmp.h>
  41 #include <linux/filter.h>
  42 #include <linux/if_packet.h>
  43 #include <readline/readline.h>
  44 #include <readline/history.h>
  45 #include <sys/types.h>
  46 #include <sys/socket.h>
  47 #include <sys/stat.h>
  48 #include <sys/mman.h>
  49 #include <fcntl.h>
  50 #include <errno.h>
  51 #include <signal.h>
  52 #include <arpa/inet.h>
  53 #include <net/ethernet.h>
  54 
  55 #define TCPDUMP_MAGIC   0xa1b2c3d4
  56 
  57 #define BPF_LDX_B       (BPF_LDX | BPF_B)
  58 #define BPF_LDX_W       (BPF_LDX | BPF_W)
  59 #define BPF_JMP_JA      (BPF_JMP | BPF_JA)
  60 #define BPF_JMP_JEQ     (BPF_JMP | BPF_JEQ)
  61 #define BPF_JMP_JGT     (BPF_JMP | BPF_JGT)
  62 #define BPF_JMP_JGE     (BPF_JMP | BPF_JGE)
  63 #define BPF_JMP_JSET    (BPF_JMP | BPF_JSET)
  64 #define BPF_ALU_ADD     (BPF_ALU | BPF_ADD)
  65 #define BPF_ALU_SUB     (BPF_ALU | BPF_SUB)
  66 #define BPF_ALU_MUL     (BPF_ALU | BPF_MUL)
  67 #define BPF_ALU_DIV     (BPF_ALU | BPF_DIV)
  68 #define BPF_ALU_MOD     (BPF_ALU | BPF_MOD)
  69 #define BPF_ALU_NEG     (BPF_ALU | BPF_NEG)
  70 #define BPF_ALU_AND     (BPF_ALU | BPF_AND)
  71 #define BPF_ALU_OR      (BPF_ALU | BPF_OR)
  72 #define BPF_ALU_XOR     (BPF_ALU | BPF_XOR)
  73 #define BPF_ALU_LSH     (BPF_ALU | BPF_LSH)
  74 #define BPF_ALU_RSH     (BPF_ALU | BPF_RSH)
  75 #define BPF_MISC_TAX    (BPF_MISC | BPF_TAX)
  76 #define BPF_MISC_TXA    (BPF_MISC | BPF_TXA)
  77 #define BPF_LD_B        (BPF_LD | BPF_B)
  78 #define BPF_LD_H        (BPF_LD | BPF_H)
  79 #define BPF_LD_W        (BPF_LD | BPF_W)
  80 
  81 #ifndef array_size
  82 # define array_size(x)  (sizeof(x) / sizeof((x)[0]))
  83 #endif
  84 
  85 #ifndef __check_format_printf
  86 # define __check_format_printf(pos_fmtstr, pos_fmtargs) \
  87         __attribute__ ((format (printf, (pos_fmtstr), (pos_fmtargs))))
  88 #endif
  89 
  90 enum {
  91         CMD_OK,
  92         CMD_ERR,
  93         CMD_EX,
  94 };
  95 
  96 struct shell_cmd {
  97         const char *name;
  98         int (*func)(char *args);
  99 };
 100 
 101 struct pcap_filehdr {
 102         uint32_t magic;
 103         uint16_t version_major;
 104         uint16_t version_minor;
 105         int32_t  thiszone;
 106         uint32_t sigfigs;
 107         uint32_t snaplen;
 108         uint32_t linktype;
 109 };
 110 
 111 struct pcap_timeval {
 112         int32_t tv_sec;
 113         int32_t tv_usec;
 114 };
 115 
 116 struct pcap_pkthdr {
 117         struct pcap_timeval ts;
 118         uint32_t caplen;
 119         uint32_t len;
 120 };
 121 
 122 struct bpf_regs {
 123         uint32_t A;
 124         uint32_t X;
 125         uint32_t M[BPF_MEMWORDS];
 126         uint32_t R;
 127         bool     Rs;
 128         uint16_t Pc;
 129 };
 130 
 131 static struct sock_filter bpf_image[BPF_MAXINSNS + 1];
 132 static unsigned int bpf_prog_len;
 133 
 134 static int bpf_breakpoints[64];
 135 static struct bpf_regs bpf_regs[BPF_MAXINSNS + 1];
 136 static struct bpf_regs bpf_curr;
 137 static unsigned int bpf_regs_len;
 138 
 139 static int pcap_fd = -1;
 140 static unsigned int pcap_packet;
 141 static size_t pcap_map_size;
 142 static char *pcap_ptr_va_start, *pcap_ptr_va_curr;
 143 
 144 static const char * const op_table[] = {
 145         [BPF_ST]        = "st",
 146         [BPF_STX]       = "stx",
 147         [BPF_LD_B]      = "ldb",
 148         [BPF_LD_H]      = "ldh",
 149         [BPF_LD_W]      = "ld",
 150         [BPF_LDX]       = "ldx",
 151         [BPF_LDX_B]     = "ldxb",
 152         [BPF_JMP_JA]    = "ja",
 153         [BPF_JMP_JEQ]   = "jeq",
 154         [BPF_JMP_JGT]   = "jgt",
 155         [BPF_JMP_JGE]   = "jge",
 156         [BPF_JMP_JSET]  = "jset",
 157         [BPF_ALU_ADD]   = "add",
 158         [BPF_ALU_SUB]   = "sub",
 159         [BPF_ALU_MUL]   = "mul",
 160         [BPF_ALU_DIV]   = "div",
 161         [BPF_ALU_MOD]   = "mod",
 162         [BPF_ALU_NEG]   = "neg",
 163         [BPF_ALU_AND]   = "and",
 164         [BPF_ALU_OR]    = "or",
 165         [BPF_ALU_XOR]   = "xor",
 166         [BPF_ALU_LSH]   = "lsh",
 167         [BPF_ALU_RSH]   = "rsh",
 168         [BPF_MISC_TAX]  = "tax",
 169         [BPF_MISC_TXA]  = "txa",
 170         [BPF_RET]       = "ret",
 171 };
 172 
 173 static __check_format_printf(1, 2) int rl_printf(const char *fmt, ...)
 174 {
 175         int ret;
 176         va_list vl;
 177 
 178         va_start(vl, fmt);
 179         ret = vfprintf(rl_outstream, fmt, vl);
 180         va_end(vl);
 181 
 182         return ret;
 183 }
 184 
 185 static int matches(const char *cmd, const char *pattern)
 186 {
 187         int len = strlen(cmd);
 188 
 189         if (len > strlen(pattern))
 190                 return -1;
 191 
 192         return memcmp(pattern, cmd, len);
 193 }
 194 
 195 static void hex_dump(const uint8_t *buf, size_t len)
 196 {
 197         int i;
 198 
 199         rl_printf("%3u: ", 0);
 200         for (i = 0; i < len; i++) {
 201                 if (i && !(i % 16))
 202                         rl_printf("\n%3u: ", i);
 203                 rl_printf("%02x ", buf[i]);
 204         }
 205         rl_printf("\n");
 206 }
 207 
 208 static bool bpf_prog_loaded(void)
 209 {
 210         if (bpf_prog_len == 0)
 211                 rl_printf("no bpf program loaded!\n");
 212 
 213         return bpf_prog_len > 0;
 214 }
 215 
 216 static void bpf_disasm(const struct sock_filter f, unsigned int i)
 217 {
 218         const char *op, *fmt;
 219         int val = f.k;
 220         char buf[256];
 221 
 222         switch (f.code) {
 223         case BPF_RET | BPF_K:
 224                 op = op_table[BPF_RET];
 225                 fmt = "#%#x";
 226                 break;
 227         case BPF_RET | BPF_A:
 228                 op = op_table[BPF_RET];
 229                 fmt = "a";
 230                 break;
 231         case BPF_RET | BPF_X:
 232                 op = op_table[BPF_RET];
 233                 fmt = "x";
 234                 break;
 235         case BPF_MISC_TAX:
 236                 op = op_table[BPF_MISC_TAX];
 237                 fmt = "";
 238                 break;
 239         case BPF_MISC_TXA:
 240                 op = op_table[BPF_MISC_TXA];
 241                 fmt = "";
 242                 break;
 243         case BPF_ST:
 244                 op = op_table[BPF_ST];
 245                 fmt = "M[%d]";
 246                 break;
 247         case BPF_STX:
 248                 op = op_table[BPF_STX];
 249                 fmt = "M[%d]";
 250                 break;
 251         case BPF_LD_W | BPF_ABS:
 252                 op = op_table[BPF_LD_W];
 253                 fmt = "[%d]";
 254                 break;
 255         case BPF_LD_H | BPF_ABS:
 256                 op = op_table[BPF_LD_H];
 257                 fmt = "[%d]";
 258                 break;
 259         case BPF_LD_B | BPF_ABS:
 260                 op = op_table[BPF_LD_B];
 261                 fmt = "[%d]";
 262                 break;
 263         case BPF_LD_W | BPF_LEN:
 264                 op = op_table[BPF_LD_W];
 265                 fmt = "#len";
 266                 break;
 267         case BPF_LD_W | BPF_IND:
 268                 op = op_table[BPF_LD_W];
 269                 fmt = "[x+%d]";
 270                 break;
 271         case BPF_LD_H | BPF_IND:
 272                 op = op_table[BPF_LD_H];
 273                 fmt = "[x+%d]";
 274                 break;
 275         case BPF_LD_B | BPF_IND:
 276                 op = op_table[BPF_LD_B];
 277                 fmt = "[x+%d]";
 278                 break;
 279         case BPF_LD | BPF_IMM:
 280                 op = op_table[BPF_LD_W];
 281                 fmt = "#%#x";
 282                 break;
 283         case BPF_LDX | BPF_IMM:
 284                 op = op_table[BPF_LDX];
 285                 fmt = "#%#x";
 286                 break;
 287         case BPF_LDX_B | BPF_MSH:
 288                 op = op_table[BPF_LDX_B];
 289                 fmt = "4*([%d]&0xf)";
 290                 break;
 291         case BPF_LD | BPF_MEM:
 292                 op = op_table[BPF_LD_W];
 293                 fmt = "M[%d]";
 294                 break;
 295         case BPF_LDX | BPF_MEM:
 296                 op = op_table[BPF_LDX];
 297                 fmt = "M[%d]";
 298                 break;
 299         case BPF_JMP_JA:
 300                 op = op_table[BPF_JMP_JA];
 301                 fmt = "%d";
 302                 val = i + 1 + f.k;
 303                 break;
 304         case BPF_JMP_JGT | BPF_X:
 305                 op = op_table[BPF_JMP_JGT];
 306                 fmt = "x";
 307                 break;
 308         case BPF_JMP_JGT | BPF_K:
 309                 op = op_table[BPF_JMP_JGT];
 310                 fmt = "#%#x";
 311                 break;
 312         case BPF_JMP_JGE | BPF_X:
 313                 op = op_table[BPF_JMP_JGE];
 314                 fmt = "x";
 315                 break;
 316         case BPF_JMP_JGE | BPF_K:
 317                 op = op_table[BPF_JMP_JGE];
 318                 fmt = "#%#x";
 319                 break;
 320         case BPF_JMP_JEQ | BPF_X:
 321                 op = op_table[BPF_JMP_JEQ];
 322                 fmt = "x";
 323                 break;
 324         case BPF_JMP_JEQ | BPF_K:
 325                 op = op_table[BPF_JMP_JEQ];
 326                 fmt = "#%#x";
 327                 break;
 328         case BPF_JMP_JSET | BPF_X:
 329                 op = op_table[BPF_JMP_JSET];
 330                 fmt = "x";
 331                 break;
 332         case BPF_JMP_JSET | BPF_K:
 333                 op = op_table[BPF_JMP_JSET];
 334                 fmt = "#%#x";
 335                 break;
 336         case BPF_ALU_NEG:
 337                 op = op_table[BPF_ALU_NEG];
 338                 fmt = "";
 339                 break;
 340         case BPF_ALU_LSH | BPF_X:
 341                 op = op_table[BPF_ALU_LSH];
 342                 fmt = "x";
 343                 break;
 344         case BPF_ALU_LSH | BPF_K:
 345                 op = op_table[BPF_ALU_LSH];
 346                 fmt = "#%d";
 347                 break;
 348         case BPF_ALU_RSH | BPF_X:
 349                 op = op_table[BPF_ALU_RSH];
 350                 fmt = "x";
 351                 break;
 352         case BPF_ALU_RSH | BPF_K:
 353                 op = op_table[BPF_ALU_RSH];
 354                 fmt = "#%d";
 355                 break;
 356         case BPF_ALU_ADD | BPF_X:
 357                 op = op_table[BPF_ALU_ADD];
 358                 fmt = "x";
 359                 break;
 360         case BPF_ALU_ADD | BPF_K:
 361                 op = op_table[BPF_ALU_ADD];
 362                 fmt = "#%d";
 363                 break;
 364         case BPF_ALU_SUB | BPF_X:
 365                 op = op_table[BPF_ALU_SUB];
 366                 fmt = "x";
 367                 break;
 368         case BPF_ALU_SUB | BPF_K:
 369                 op = op_table[BPF_ALU_SUB];
 370                 fmt = "#%d";
 371                 break;
 372         case BPF_ALU_MUL | BPF_X:
 373                 op = op_table[BPF_ALU_MUL];
 374                 fmt = "x";
 375                 break;
 376         case BPF_ALU_MUL | BPF_K:
 377                 op = op_table[BPF_ALU_MUL];
 378                 fmt = "#%d";
 379                 break;
 380         case BPF_ALU_DIV | BPF_X:
 381                 op = op_table[BPF_ALU_DIV];
 382                 fmt = "x";
 383                 break;
 384         case BPF_ALU_DIV | BPF_K:
 385                 op = op_table[BPF_ALU_DIV];
 386                 fmt = "#%d";
 387                 break;
 388         case BPF_ALU_MOD | BPF_X:
 389                 op = op_table[BPF_ALU_MOD];
 390                 fmt = "x";
 391                 break;
 392         case BPF_ALU_MOD | BPF_K:
 393                 op = op_table[BPF_ALU_MOD];
 394                 fmt = "#%d";
 395                 break;
 396         case BPF_ALU_AND | BPF_X:
 397                 op = op_table[BPF_ALU_AND];
 398                 fmt = "x";
 399                 break;
 400         case BPF_ALU_AND | BPF_K:
 401                 op = op_table[BPF_ALU_AND];
 402                 fmt = "#%#x";
 403                 break;
 404         case BPF_ALU_OR | BPF_X:
 405                 op = op_table[BPF_ALU_OR];
 406                 fmt = "x";
 407                 break;
 408         case BPF_ALU_OR | BPF_K:
 409                 op = op_table[BPF_ALU_OR];
 410                 fmt = "#%#x";
 411                 break;
 412         case BPF_ALU_XOR | BPF_X:
 413                 op = op_table[BPF_ALU_XOR];
 414                 fmt = "x";
 415                 break;
 416         case BPF_ALU_XOR | BPF_K:
 417                 op = op_table[BPF_ALU_XOR];
 418                 fmt = "#%#x";
 419                 break;
 420         default:
 421                 op = "nosup";
 422                 fmt = "%#x";
 423                 val = f.code;
 424                 break;
 425         }
 426 
 427         memset(buf, 0, sizeof(buf));
 428         snprintf(buf, sizeof(buf), fmt, val);
 429         buf[sizeof(buf) - 1] = 0;
 430 
 431         if ((BPF_CLASS(f.code) == BPF_JMP && BPF_OP(f.code) != BPF_JA))
 432                 rl_printf("l%d:\t%s %s, l%d, l%d\n", i, op, buf,
 433                           i + 1 + f.jt, i + 1 + f.jf);
 434         else
 435                 rl_printf("l%d:\t%s %s\n", i, op, buf);
 436 }
 437 
 438 static void bpf_dump_curr(struct bpf_regs *r, struct sock_filter *f)
 439 {
 440         int i, m = 0;
 441 
 442         rl_printf("pc:       [%u]\n", r->Pc);
 443         rl_printf("code:     [%u] jt[%u] jf[%u] k[%u]\n",
 444                   f->code, f->jt, f->jf, f->k);
 445         rl_printf("curr:     ");
 446         bpf_disasm(*f, r->Pc);
 447 
 448         if (f->jt || f->jf) {
 449                 rl_printf("jt:       ");
 450                 bpf_disasm(*(f + f->jt + 1), r->Pc + f->jt + 1);
 451                 rl_printf("jf:       ");
 452                 bpf_disasm(*(f + f->jf + 1), r->Pc + f->jf + 1);
 453         }
 454 
 455         rl_printf("A:        [%#08x][%u]\n", r->A, r->A);
 456         rl_printf("X:        [%#08x][%u]\n", r->X, r->X);
 457         if (r->Rs)
 458                 rl_printf("ret:      [%#08x][%u]!\n", r->R, r->R);
 459 
 460         for (i = 0; i < BPF_MEMWORDS; i++) {
 461                 if (r->M[i]) {
 462                         m++;
 463                         rl_printf("M[%d]: [%#08x][%u]\n", i, r->M[i], r->M[i]);
 464                 }
 465         }
 466         if (m == 0)
 467                 rl_printf("M[0,%d]:  [%#08x][%u]\n", BPF_MEMWORDS - 1, 0, 0);
 468 }
 469 
 470 static void bpf_dump_pkt(uint8_t *pkt, uint32_t pkt_caplen, uint32_t pkt_len)
 471 {
 472         if (pkt_caplen != pkt_len)
 473                 rl_printf("cap: %u, len: %u\n", pkt_caplen, pkt_len);
 474         else
 475                 rl_printf("len: %u\n", pkt_len);
 476 
 477         hex_dump(pkt, pkt_caplen);
 478 }
 479 
 480 static void bpf_disasm_all(const struct sock_filter *f, unsigned int len)
 481 {
 482         unsigned int i;
 483 
 484         for (i = 0; i < len; i++)
 485                 bpf_disasm(f[i], i);
 486 }
 487 
 488 static void bpf_dump_all(const struct sock_filter *f, unsigned int len)
 489 {
 490         unsigned int i;
 491 
 492         rl_printf("/* { op, jt, jf, k }, */\n");
 493         for (i = 0; i < len; i++)
 494                 rl_printf("{ %#04x, %2u, %2u, %#010x },\n",
 495                           f[i].code, f[i].jt, f[i].jf, f[i].k);
 496 }
 497 
 498 static bool bpf_runnable(struct sock_filter *f, unsigned int len)
 499 {
 500         int sock, ret, i;
 501         struct sock_fprog bpf = {
 502                 .filter = f,
 503                 .len = len,
 504         };
 505 
 506         sock = socket(AF_INET, SOCK_DGRAM, 0);
 507         if (sock < 0) {
 508                 rl_printf("cannot open socket!\n");
 509                 return false;
 510         }
 511         ret = setsockopt(sock, SOL_SOCKET, SO_ATTACH_FILTER, &bpf, sizeof(bpf));
 512         close(sock);
 513         if (ret < 0) {
 514                 rl_printf("program not allowed to run by kernel!\n");
 515                 return false;
 516         }
 517         for (i = 0; i < len; i++) {
 518                 if (BPF_CLASS(f[i].code) == BPF_LD &&
 519                     f[i].k > SKF_AD_OFF) {
 520                         rl_printf("extensions currently not supported!\n");
 521                         return false;
 522                 }
 523         }
 524 
 525         return true;
 526 }
 527 
 528 static void bpf_reset_breakpoints(void)
 529 {
 530         int i;
 531 
 532         for (i = 0; i < array_size(bpf_breakpoints); i++)
 533                 bpf_breakpoints[i] = -1;
 534 }
 535 
 536 static void bpf_set_breakpoints(unsigned int where)
 537 {
 538         int i;
 539         bool set = false;
 540 
 541         for (i = 0; i < array_size(bpf_breakpoints); i++) {
 542                 if (bpf_breakpoints[i] == (int) where) {
 543                         rl_printf("breakpoint already set!\n");
 544                         set = true;
 545                         break;
 546                 }
 547 
 548                 if (bpf_breakpoints[i] == -1 && set == false) {
 549                         bpf_breakpoints[i] = where;
 550                         set = true;
 551                 }
 552         }
 553 
 554         if (!set)
 555                 rl_printf("too many breakpoints set, reset first!\n");
 556 }
 557 
 558 static void bpf_dump_breakpoints(void)
 559 {
 560         int i;
 561 
 562         rl_printf("breakpoints: ");
 563 
 564         for (i = 0; i < array_size(bpf_breakpoints); i++) {
 565                 if (bpf_breakpoints[i] < 0)
 566                         continue;
 567                 rl_printf("%d ", bpf_breakpoints[i]);
 568         }
 569 
 570         rl_printf("\n");
 571 }
 572 
 573 static void bpf_reset(void)
 574 {
 575         bpf_regs_len = 0;
 576 
 577         memset(bpf_regs, 0, sizeof(bpf_regs));
 578         memset(&bpf_curr, 0, sizeof(bpf_curr));
 579 }
 580 
 581 static void bpf_safe_regs(void)
 582 {
 583         memcpy(&bpf_regs[bpf_regs_len++], &bpf_curr, sizeof(bpf_curr));
 584 }
 585 
 586 static bool bpf_restore_regs(int off)
 587 {
 588         unsigned int index = bpf_regs_len - 1 + off;
 589 
 590         if (index == 0) {
 591                 bpf_reset();
 592                 return true;
 593         } else if (index < bpf_regs_len) {
 594                 memcpy(&bpf_curr, &bpf_regs[index], sizeof(bpf_curr));
 595                 bpf_regs_len = index;
 596                 return true;
 597         } else {
 598                 rl_printf("reached bottom of register history stack!\n");
 599                 return false;
 600         }
 601 }
 602 
 603 static uint32_t extract_u32(uint8_t *pkt, uint32_t off)
 604 {
 605         uint32_t r;
 606 
 607         memcpy(&r, &pkt[off], sizeof(r));
 608 
 609         return ntohl(r);
 610 }
 611 
 612 static uint16_t extract_u16(uint8_t *pkt, uint32_t off)
 613 {
 614         uint16_t r;
 615 
 616         memcpy(&r, &pkt[off], sizeof(r));
 617 
 618         return ntohs(r);
 619 }
 620 
 621 static uint8_t extract_u8(uint8_t *pkt, uint32_t off)
 622 {
 623         return pkt[off];
 624 }
 625 
 626 static void set_return(struct bpf_regs *r)
 627 {
 628         r->R = 0;
 629         r->Rs = true;
 630 }
 631 
 632 static void bpf_single_step(struct bpf_regs *r, struct sock_filter *f,
 633                             uint8_t *pkt, uint32_t pkt_caplen,
 634                             uint32_t pkt_len)
 635 {
 636         uint32_t K = f->k;
 637         int d;
 638 
 639         switch (f->code) {
 640         case BPF_RET | BPF_K:
 641                 r->R = K;
 642                 r->Rs = true;
 643                 break;
 644         case BPF_RET | BPF_A:
 645                 r->R = r->A;
 646                 r->Rs = true;
 647                 break;
 648         case BPF_RET | BPF_X:
 649                 r->R = r->X;
 650                 r->Rs = true;
 651                 break;
 652         case BPF_MISC_TAX:
 653                 r->X = r->A;
 654                 break;
 655         case BPF_MISC_TXA:
 656                 r->A = r->X;
 657                 break;
 658         case BPF_ST:
 659                 r->M[K] = r->A;
 660                 break;
 661         case BPF_STX:
 662                 r->M[K] = r->X;
 663                 break;
 664         case BPF_LD_W | BPF_ABS:
 665                 d = pkt_caplen - K;
 666                 if (d >= sizeof(uint32_t))
 667                         r->A = extract_u32(pkt, K);
 668                 else
 669                         set_return(r);
 670                 break;
 671         case BPF_LD_H | BPF_ABS:
 672                 d = pkt_caplen - K;
 673                 if (d >= sizeof(uint16_t))
 674                         r->A = extract_u16(pkt, K);
 675                 else
 676                         set_return(r);
 677                 break;
 678         case BPF_LD_B | BPF_ABS:
 679                 d = pkt_caplen - K;
 680                 if (d >= sizeof(uint8_t))
 681                         r->A = extract_u8(pkt, K);
 682                 else
 683                         set_return(r);
 684                 break;
 685         case BPF_LD_W | BPF_IND:
 686                 d = pkt_caplen - (r->X + K);
 687                 if (d >= sizeof(uint32_t))
 688                         r->A = extract_u32(pkt, r->X + K);
 689                 break;
 690         case BPF_LD_H | BPF_IND:
 691                 d = pkt_caplen - (r->X + K);
 692                 if (d >= sizeof(uint16_t))
 693                         r->A = extract_u16(pkt, r->X + K);
 694                 else
 695                         set_return(r);
 696                 break;
 697         case BPF_LD_B | BPF_IND:
 698                 d = pkt_caplen - (r->X + K);
 699                 if (d >= sizeof(uint8_t))
 700                         r->A = extract_u8(pkt, r->X + K);
 701                 else
 702                         set_return(r);
 703                 break;
 704         case BPF_LDX_B | BPF_MSH:
 705                 d = pkt_caplen - K;
 706                 if (d >= sizeof(uint8_t)) {
 707                         r->X = extract_u8(pkt, K);
 708                         r->X = (r->X & 0xf) << 2;
 709                 } else
 710                         set_return(r);
 711                 break;
 712         case BPF_LD_W | BPF_LEN:
 713                 r->A = pkt_len;
 714                 break;
 715         case BPF_LDX_W | BPF_LEN:
 716                 r->A = pkt_len;
 717                 break;
 718         case BPF_LD | BPF_IMM:
 719                 r->A = K;
 720                 break;
 721         case BPF_LDX | BPF_IMM:
 722                 r->X = K;
 723                 break;
 724         case BPF_LD | BPF_MEM:
 725                 r->A = r->M[K];
 726                 break;
 727         case BPF_LDX | BPF_MEM:
 728                 r->X = r->M[K];
 729                 break;
 730         case BPF_JMP_JA:
 731                 r->Pc += K;
 732                 break;
 733         case BPF_JMP_JGT | BPF_X:
 734                 r->Pc += r->A > r->X ? f->jt : f->jf;
 735                 break;
 736         case BPF_JMP_JGT | BPF_K:
 737                 r->Pc += r->A > K ? f->jt : f->jf;
 738                 break;
 739         case BPF_JMP_JGE | BPF_X:
 740                 r->Pc += r->A >= r->X ? f->jt : f->jf;
 741                 break;
 742         case BPF_JMP_JGE | BPF_K:
 743                 r->Pc += r->A >= K ? f->jt : f->jf;
 744                 break;
 745         case BPF_JMP_JEQ | BPF_X:
 746                 r->Pc += r->A == r->X ? f->jt : f->jf;
 747                 break;
 748         case BPF_JMP_JEQ | BPF_K:
 749                 r->Pc += r->A == K ? f->jt : f->jf;
 750                 break;
 751         case BPF_JMP_JSET | BPF_X:
 752                 r->Pc += r->A & r->X ? f->jt : f->jf;
 753                 break;
 754         case BPF_JMP_JSET | BPF_K:
 755                 r->Pc += r->A & K ? f->jt : f->jf;
 756                 break;
 757         case BPF_ALU_NEG:
 758                 r->A = -r->A;
 759                 break;
 760         case BPF_ALU_LSH | BPF_X:
 761                 r->A <<= r->X;
 762                 break;
 763         case BPF_ALU_LSH | BPF_K:
 764                 r->A <<= K;
 765                 break;
 766         case BPF_ALU_RSH | BPF_X:
 767                 r->A >>= r->X;
 768                 break;
 769         case BPF_ALU_RSH | BPF_K:
 770                 r->A >>= K;
 771                 break;
 772         case BPF_ALU_ADD | BPF_X:
 773                 r->A += r->X;
 774                 break;
 775         case BPF_ALU_ADD | BPF_K:
 776                 r->A += K;
 777                 break;
 778         case BPF_ALU_SUB | BPF_X:
 779                 r->A -= r->X;
 780                 break;
 781         case BPF_ALU_SUB | BPF_K:
 782                 r->A -= K;
 783                 break;
 784         case BPF_ALU_MUL | BPF_X:
 785                 r->A *= r->X;
 786                 break;
 787         case BPF_ALU_MUL | BPF_K:
 788                 r->A *= K;
 789                 break;
 790         case BPF_ALU_DIV | BPF_X:
 791         case BPF_ALU_MOD | BPF_X:
 792                 if (r->X == 0) {
 793                         set_return(r);
 794                         break;
 795                 }
 796                 goto do_div;
 797         case BPF_ALU_DIV | BPF_K:
 798         case BPF_ALU_MOD | BPF_K:
 799                 if (K == 0) {
 800                         set_return(r);
 801                         break;
 802                 }
 803 do_div:
 804                 switch (f->code) {
 805                 case BPF_ALU_DIV | BPF_X:
 806                         r->A /= r->X;
 807                         break;
 808                 case BPF_ALU_DIV | BPF_K:
 809                         r->A /= K;
 810                         break;
 811                 case BPF_ALU_MOD | BPF_X:
 812                         r->A %= r->X;
 813                         break;
 814                 case BPF_ALU_MOD | BPF_K:
 815                         r->A %= K;
 816                         break;
 817                 }
 818                 break;
 819         case BPF_ALU_AND | BPF_X:
 820                 r->A &= r->X;
 821                 break;
 822         case BPF_ALU_AND | BPF_K:
 823                 r->A &= K;
 824                 break;
 825         case BPF_ALU_OR | BPF_X:
 826                 r->A |= r->X;
 827                 break;
 828         case BPF_ALU_OR | BPF_K:
 829                 r->A |= K;
 830                 break;
 831         case BPF_ALU_XOR | BPF_X:
 832                 r->A ^= r->X;
 833                 break;
 834         case BPF_ALU_XOR | BPF_K:
 835                 r->A ^= K;
 836                 break;
 837         }
 838 }
 839 
 840 static bool bpf_pc_has_breakpoint(uint16_t pc)
 841 {
 842         int i;
 843 
 844         for (i = 0; i < array_size(bpf_breakpoints); i++) {
 845                 if (bpf_breakpoints[i] < 0)
 846                         continue;
 847                 if (bpf_breakpoints[i] == pc)
 848                         return true;
 849         }
 850 
 851         return false;
 852 }
 853 
 854 static bool bpf_handle_breakpoint(struct bpf_regs *r, struct sock_filter *f,
 855                                   uint8_t *pkt, uint32_t pkt_caplen,
 856                                   uint32_t pkt_len)
 857 {
 858         rl_printf("-- register dump --\n");
 859         bpf_dump_curr(r, &f[r->Pc]);
 860         rl_printf("-- packet dump --\n");
 861         bpf_dump_pkt(pkt, pkt_caplen, pkt_len);
 862         rl_printf("(breakpoint)\n");
 863         return true;
 864 }
 865 
 866 static int bpf_run_all(struct sock_filter *f, uint16_t bpf_len, uint8_t *pkt,
 867                        uint32_t pkt_caplen, uint32_t pkt_len)
 868 {
 869         bool stop = false;
 870 
 871         while (bpf_curr.Rs == false && stop == false) {
 872                 bpf_safe_regs();
 873 
 874                 if (bpf_pc_has_breakpoint(bpf_curr.Pc))
 875                         stop = bpf_handle_breakpoint(&bpf_curr, f, pkt,
 876                                                      pkt_caplen, pkt_len);
 877 
 878                 bpf_single_step(&bpf_curr, &f[bpf_curr.Pc], pkt, pkt_caplen,
 879                                 pkt_len);
 880                 bpf_curr.Pc++;
 881         }
 882 
 883         return stop ? -1 : bpf_curr.R;
 884 }
 885 
 886 static int bpf_run_stepping(struct sock_filter *f, uint16_t bpf_len,
 887                             uint8_t *pkt, uint32_t pkt_caplen,
 888                             uint32_t pkt_len, int next)
 889 {
 890         bool stop = false;
 891         int i = 1;
 892 
 893         while (bpf_curr.Rs == false && stop == false) {
 894                 bpf_safe_regs();
 895 
 896                 if (i++ == next)
 897                         stop = bpf_handle_breakpoint(&bpf_curr, f, pkt,
 898                                                      pkt_caplen, pkt_len);
 899 
 900                 bpf_single_step(&bpf_curr, &f[bpf_curr.Pc], pkt, pkt_caplen,
 901                                 pkt_len);
 902                 bpf_curr.Pc++;
 903         }
 904 
 905         return stop ? -1 : bpf_curr.R;
 906 }
 907 
 908 static bool pcap_loaded(void)
 909 {
 910         if (pcap_fd < 0)
 911                 rl_printf("no pcap file loaded!\n");
 912 
 913         return pcap_fd >= 0;
 914 }
 915 
 916 static struct pcap_pkthdr *pcap_curr_pkt(void)
 917 {
 918         return (void *) pcap_ptr_va_curr;
 919 }
 920 
 921 static bool pcap_next_pkt(void)
 922 {
 923         struct pcap_pkthdr *hdr = pcap_curr_pkt();
 924 
 925         if (pcap_ptr_va_curr + sizeof(*hdr) -
 926             pcap_ptr_va_start >= pcap_map_size)
 927                 return false;
 928         if (hdr->caplen == 0 || hdr->len == 0 || hdr->caplen > hdr->len)
 929                 return false;
 930         if (pcap_ptr_va_curr + sizeof(*hdr) + hdr->caplen -
 931             pcap_ptr_va_start >= pcap_map_size)
 932                 return false;
 933 
 934         pcap_ptr_va_curr += (sizeof(*hdr) + hdr->caplen);
 935         return true;
 936 }
 937 
 938 static void pcap_reset_pkt(void)
 939 {
 940         pcap_ptr_va_curr = pcap_ptr_va_start + sizeof(struct pcap_filehdr);
 941 }
 942 
 943 static int try_load_pcap(const char *file)
 944 {
 945         struct pcap_filehdr *hdr;
 946         struct stat sb;
 947         int ret;
 948 
 949         pcap_fd = open(file, O_RDONLY);
 950         if (pcap_fd < 0) {
 951                 rl_printf("cannot open pcap [%s]!\n", strerror(errno));
 952                 return CMD_ERR;
 953         }
 954 
 955         ret = fstat(pcap_fd, &sb);
 956         if (ret < 0) {
 957                 rl_printf("cannot fstat pcap file!\n");
 958                 return CMD_ERR;
 959         }
 960 
 961         if (!S_ISREG(sb.st_mode)) {
 962                 rl_printf("not a regular pcap file, duh!\n");
 963                 return CMD_ERR;
 964         }
 965 
 966         pcap_map_size = sb.st_size;
 967         if (pcap_map_size <= sizeof(struct pcap_filehdr)) {
 968                 rl_printf("pcap file too small!\n");
 969                 return CMD_ERR;
 970         }
 971 
 972         pcap_ptr_va_start = mmap(NULL, pcap_map_size, PROT_READ,
 973                                  MAP_SHARED | MAP_LOCKED, pcap_fd, 0);
 974         if (pcap_ptr_va_start == MAP_FAILED) {
 975                 rl_printf("mmap of file failed!");
 976                 return CMD_ERR;
 977         }
 978 
 979         hdr = (void *) pcap_ptr_va_start;
 980         if (hdr->magic != TCPDUMP_MAGIC) {
 981                 rl_printf("wrong pcap magic!\n");
 982                 return CMD_ERR;
 983         }
 984 
 985         pcap_reset_pkt();
 986 
 987         return CMD_OK;
 988 
 989 }
 990 
 991 static void try_close_pcap(void)
 992 {
 993         if (pcap_fd >= 0) {
 994                 munmap(pcap_ptr_va_start, pcap_map_size);
 995                 close(pcap_fd);
 996 
 997                 pcap_ptr_va_start = pcap_ptr_va_curr = NULL;
 998                 pcap_map_size = 0;
 999                 pcap_packet = 0;
1000                 pcap_fd = -1;
1001         }
1002 }
1003 
1004 static int cmd_load_bpf(char *bpf_string)
1005 {
1006         char sp, *token, separator = ',';
1007         unsigned short bpf_len, i = 0;
1008         struct sock_filter tmp;
1009 
1010         bpf_prog_len = 0;
1011         memset(bpf_image, 0, sizeof(bpf_image));
1012 
1013         if (sscanf(bpf_string, "%hu%c", &bpf_len, &sp) != 2 ||
1014             sp != separator || bpf_len > BPF_MAXINSNS || bpf_len == 0) {
1015                 rl_printf("syntax error in head length encoding!\n");
1016                 return CMD_ERR;
1017         }
1018 
1019         token = bpf_string;
1020         while ((token = strchr(token, separator)) && (++token)[0]) {
1021                 if (i >= bpf_len) {
1022                         rl_printf("program exceeds encoded length!\n");
1023                         return CMD_ERR;
1024                 }
1025 
1026                 if (sscanf(token, "%hu %hhu %hhu %u,",
1027                            &tmp.code, &tmp.jt, &tmp.jf, &tmp.k) != 4) {
1028                         rl_printf("syntax error at instruction %d!\n", i);
1029                         return CMD_ERR;
1030                 }
1031 
1032                 bpf_image[i].code = tmp.code;
1033                 bpf_image[i].jt = tmp.jt;
1034                 bpf_image[i].jf = tmp.jf;
1035                 bpf_image[i].k = tmp.k;
1036 
1037                 i++;
1038         }
1039 
1040         if (i != bpf_len) {
1041                 rl_printf("syntax error exceeding encoded length!\n");
1042                 return CMD_ERR;
1043         } else
1044                 bpf_prog_len = bpf_len;
1045         if (!bpf_runnable(bpf_image, bpf_prog_len))
1046                 bpf_prog_len = 0;
1047 
1048         return CMD_OK;
1049 }
1050 
1051 static int cmd_load_pcap(char *file)
1052 {
1053         char *file_trim, *tmp;
1054 
1055         file_trim = strtok_r(file, " ", &tmp);
1056         if (file_trim == NULL)
1057                 return CMD_ERR;
1058 
1059         try_close_pcap();
1060 
1061         return try_load_pcap(file_trim);
1062 }
1063 
1064 static int cmd_load(char *arg)
1065 {
1066         char *subcmd, *cont = NULL, *tmp = strdup(arg);
1067         int ret = CMD_OK;
1068 
1069         subcmd = strtok_r(tmp, " ", &cont);
1070         if (subcmd == NULL)
1071                 goto out;
1072         if (matches(subcmd, "bpf") == 0) {
1073                 bpf_reset();
1074                 bpf_reset_breakpoints();
1075 
1076                 if (!cont)
1077                         ret = CMD_ERR;
1078                 else
1079                         ret = cmd_load_bpf(cont);
1080         } else if (matches(subcmd, "pcap") == 0) {
1081                 ret = cmd_load_pcap(cont);
1082         } else {
1083 out:
1084                 rl_printf("bpf <code>:  load bpf code\n");
1085                 rl_printf("pcap <file>: load pcap file\n");
1086                 ret = CMD_ERR;
1087         }
1088 
1089         free(tmp);
1090         return ret;
1091 }
1092 
1093 static int cmd_step(char *num)
1094 {
1095         struct pcap_pkthdr *hdr;
1096         int steps, ret;
1097 
1098         if (!bpf_prog_loaded() || !pcap_loaded())
1099                 return CMD_ERR;
1100 
1101         steps = strtol(num, NULL, 10);
1102         if (steps == 0 || strlen(num) == 0)
1103                 steps = 1;
1104         if (steps < 0) {
1105                 if (!bpf_restore_regs(steps))
1106                         return CMD_ERR;
1107                 steps = 1;
1108         }
1109 
1110         hdr = pcap_curr_pkt();
1111         ret = bpf_run_stepping(bpf_image, bpf_prog_len,
1112                                (uint8_t *) hdr + sizeof(*hdr),
1113                                hdr->caplen, hdr->len, steps);
1114         if (ret >= 0 || bpf_curr.Rs) {
1115                 bpf_reset();
1116                 if (!pcap_next_pkt()) {
1117                         rl_printf("(going back to first packet)\n");
1118                         pcap_reset_pkt();
1119                 } else {
1120                         rl_printf("(next packet)\n");
1121                 }
1122         }
1123 
1124         return CMD_OK;
1125 }
1126 
1127 static int cmd_select(char *num)
1128 {
1129         unsigned int which, i;
1130         bool have_next = true;
1131 
1132         if (!pcap_loaded() || strlen(num) == 0)
1133                 return CMD_ERR;
1134 
1135         which = strtoul(num, NULL, 10);
1136         if (which == 0) {
1137                 rl_printf("packet count starts with 1, clamping!\n");
1138                 which = 1;
1139         }
1140 
1141         pcap_reset_pkt();
1142         bpf_reset();
1143 
1144         for (i = 0; i < which && (have_next = pcap_next_pkt()); i++)
1145                 /* noop */;
1146         if (!have_next || pcap_curr_pkt() == NULL) {
1147                 rl_printf("no packet #%u available!\n", which);
1148                 pcap_reset_pkt();
1149                 return CMD_ERR;
1150         }
1151 
1152         return CMD_OK;
1153 }
1154 
1155 static int cmd_breakpoint(char *subcmd)
1156 {
1157         if (!bpf_prog_loaded())
1158                 return CMD_ERR;
1159         if (strlen(subcmd) == 0)
1160                 bpf_dump_breakpoints();
1161         else if (matches(subcmd, "reset") == 0)
1162                 bpf_reset_breakpoints();
1163         else {
1164                 unsigned int where = strtoul(subcmd, NULL, 10);
1165 
1166                 if (where < bpf_prog_len) {
1167                         bpf_set_breakpoints(where);
1168                         rl_printf("breakpoint at: ");
1169                         bpf_disasm(bpf_image[where], where);
1170                 }
1171         }
1172 
1173         return CMD_OK;
1174 }
1175 
1176 static int cmd_run(char *num)
1177 {
1178         static uint32_t pass, fail;
1179         bool has_limit = true;
1180         int pkts = 0, i = 0;
1181 
1182         if (!bpf_prog_loaded() || !pcap_loaded())
1183                 return CMD_ERR;
1184 
1185         pkts = strtol(num, NULL, 10);
1186         if (pkts == 0 || strlen(num) == 0)
1187                 has_limit = false;
1188 
1189         do {
1190                 struct pcap_pkthdr *hdr = pcap_curr_pkt();
1191                 int ret = bpf_run_all(bpf_image, bpf_prog_len,
1192                                       (uint8_t *) hdr + sizeof(*hdr),
1193                                       hdr->caplen, hdr->len);
1194                 if (ret > 0)
1195                         pass++;
1196                 else if (ret == 0)
1197                         fail++;
1198                 else
1199                         return CMD_OK;
1200                 bpf_reset();
1201         } while (pcap_next_pkt() && (!has_limit || (has_limit && ++i < pkts)));
1202 
1203         rl_printf("bpf passes:%u fails:%u\n", pass, fail);
1204 
1205         pcap_reset_pkt();
1206         bpf_reset();
1207 
1208         pass = fail = 0;
1209         return CMD_OK;
1210 }
1211 
1212 static int cmd_disassemble(char *line_string)
1213 {
1214         bool single_line = false;
1215         unsigned long line;
1216 
1217         if (!bpf_prog_loaded())
1218                 return CMD_ERR;
1219         if (strlen(line_string) > 0 &&
1220             (line = strtoul(line_string, NULL, 10)) < bpf_prog_len)
1221                 single_line = true;
1222         if (single_line)
1223                 bpf_disasm(bpf_image[line], line);
1224         else
1225                 bpf_disasm_all(bpf_image, bpf_prog_len);
1226 
1227         return CMD_OK;
1228 }
1229 
1230 static int cmd_dump(char *dontcare)
1231 {
1232         if (!bpf_prog_loaded())
1233                 return CMD_ERR;
1234 
1235         bpf_dump_all(bpf_image, bpf_prog_len);
1236 
1237         return CMD_OK;
1238 }
1239 
1240 static int cmd_quit(char *dontcare)
1241 {
1242         return CMD_EX;
1243 }
1244 
1245 static const struct shell_cmd cmds[] = {
1246         { .name = "load", .func = cmd_load },
1247         { .name = "select", .func = cmd_select },
1248         { .name = "step", .func = cmd_step },
1249         { .name = "run", .func = cmd_run },
1250         { .name = "breakpoint", .func = cmd_breakpoint },
1251         { .name = "disassemble", .func = cmd_disassemble },
1252         { .name = "dump", .func = cmd_dump },
1253         { .name = "quit", .func = cmd_quit },
1254 };
1255 
1256 static int execf(char *arg)
1257 {
1258         char *cmd, *cont, *tmp = strdup(arg);
1259         int i, ret = 0, len;
1260 
1261         cmd = strtok_r(tmp, " ", &cont);
1262         if (cmd == NULL)
1263                 goto out;
1264         len = strlen(cmd);
1265         for (i = 0; i < array_size(cmds); i++) {
1266                 if (len != strlen(cmds[i].name))
1267                         continue;
1268                 if (strncmp(cmds[i].name, cmd, len) == 0) {
1269                         ret = cmds[i].func(cont);
1270                         break;
1271                 }
1272         }
1273 out:
1274         free(tmp);
1275         return ret;
1276 }
1277 
1278 static char *shell_comp_gen(const char *buf, int state)
1279 {
1280         static int list_index, len;
1281 
1282         if (!state) {
1283                 list_index = 0;
1284                 len = strlen(buf);
1285         }
1286 
1287         for (; list_index < array_size(cmds); ) {
1288                 const char *name = cmds[list_index].name;
1289 
1290                 list_index++;
1291                 if (strncmp(name, buf, len) == 0)
1292                         return strdup(name);
1293         }
1294 
1295         return NULL;
1296 }
1297 
1298 static char **shell_completion(const char *buf, int start, int end)
1299 {
1300         char **matches = NULL;
1301 
1302         if (start == 0)
1303                 matches = rl_completion_matches(buf, shell_comp_gen);
1304 
1305         return matches;
1306 }
1307 
1308 static void intr_shell(int sig)
1309 {
1310         if (rl_end)
1311                 rl_kill_line(-1, 0);
1312 
1313         rl_crlf();
1314         rl_refresh_line(0, 0);
1315         rl_free_line_state();
1316 }
1317 
1318 static void init_shell(FILE *fin, FILE *fout)
1319 {
1320         char file[128];
1321 
1322         snprintf(file, sizeof(file), "%s/.bpf_dbg_history", getenv("HOME"));
1323         read_history(file);
1324 
1325         rl_instream = fin;
1326         rl_outstream = fout;
1327 
1328         rl_readline_name = "bpf_dbg";
1329         rl_terminal_name = getenv("TERM");
1330 
1331         rl_catch_signals = 0;
1332         rl_catch_sigwinch = 1;
1333 
1334         rl_attempted_completion_function = shell_completion;
1335 
1336         rl_bind_key('\t', rl_complete);
1337 
1338         rl_bind_key_in_map('\t', rl_complete, emacs_meta_keymap);
1339         rl_bind_key_in_map('\033', rl_complete, emacs_meta_keymap);
1340 
1341         snprintf(file, sizeof(file), "%s/.bpf_dbg_init", getenv("HOME"));
1342         rl_read_init_file(file);
1343 
1344         rl_prep_terminal(0);
1345         rl_set_signals();
1346 
1347         signal(SIGINT, intr_shell);
1348 }
1349 
1350 static void exit_shell(FILE *fin, FILE *fout)
1351 {
1352         char file[128];
1353 
1354         snprintf(file, sizeof(file), "%s/.bpf_dbg_history", getenv("HOME"));
1355         write_history(file);
1356 
1357         clear_history();
1358         rl_deprep_terminal();
1359 
1360         try_close_pcap();
1361 
1362         if (fin != stdin)
1363                 fclose(fin);
1364         if (fout != stdout)
1365                 fclose(fout);
1366 }
1367 
1368 static int run_shell_loop(FILE *fin, FILE *fout)
1369 {
1370         char *buf;
1371 
1372         init_shell(fin, fout);
1373 
1374         while ((buf = readline("> ")) != NULL) {
1375                 int ret = execf(buf);
1376                 if (ret == CMD_EX)
1377                         break;
1378                 if (ret == CMD_OK && strlen(buf) > 0)
1379                         add_history(buf);
1380 
1381                 free(buf);
1382         }
1383 
1384         exit_shell(fin, fout);
1385         return 0;
1386 }
1387 
1388 int main(int argc, char **argv)
1389 {
1390         FILE *fin = NULL, *fout = NULL;
1391 
1392         if (argc >= 2)
1393                 fin = fopen(argv[1], "r");
1394         if (argc >= 3)
1395                 fout = fopen(argv[2], "w");
1396 
1397         return run_shell_loop(fin ? : stdin, fout ? : stdout);
1398 }

/* [<][>][^][v][top][bottom][index][help] */