root/drivers/media/usb/dvb-usb/dvb-usb-init.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. dvb_usb_adapter_init
  2. dvb_usb_adapter_exit
  3. dvb_usb_exit
  4. dvb_usb_init
  5. dvb_usb_find_device
  6. dvb_usb_device_power_ctrl
  7. dvb_usb_device_init
  8. dvb_usb_device_exit

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * DVB USB library - provides a generic interface for a DVB USB device driver.
   4  *
   5  * dvb-usb-init.c
   6  *
   7  * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
   8  *
   9  * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
  10  */
  11 #include "dvb-usb-common.h"
  12 
  13 /* debug */
  14 int dvb_usb_debug;
  15 module_param_named(debug, dvb_usb_debug, int, 0644);
  16 MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64,mem=128,uxfer=256  (or-able))." DVB_USB_DEBUG_STATUS);
  17 
  18 int dvb_usb_disable_rc_polling;
  19 module_param_named(disable_rc_polling, dvb_usb_disable_rc_polling, int, 0644);
  20 MODULE_PARM_DESC(disable_rc_polling, "disable remote control polling (default: 0).");
  21 
  22 static int dvb_usb_force_pid_filter_usage;
  23 module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444);
  24 MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a PID filter, if any (default: 0).");
  25 
  26 static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
  27 {
  28         struct dvb_usb_adapter *adap;
  29         int ret, n, o;
  30 
  31         for (n = 0; n < d->props.num_adapters; n++) {
  32                 adap = &d->adapter[n];
  33                 adap->dev = d;
  34                 adap->id  = n;
  35 
  36                 memcpy(&adap->props, &d->props.adapter[n], sizeof(struct dvb_usb_adapter_properties));
  37 
  38                 for (o = 0; o < adap->props.num_frontends; o++) {
  39                         struct dvb_usb_adapter_fe_properties *props = &adap->props.fe[o];
  40                         /* speed - when running at FULL speed we need a HW PID filter */
  41                         if (d->udev->speed == USB_SPEED_FULL && !(props->caps & DVB_USB_ADAP_HAS_PID_FILTER)) {
  42                                 err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)");
  43                                 return -ENODEV;
  44                         }
  45 
  46                         if ((d->udev->speed == USB_SPEED_FULL && props->caps & DVB_USB_ADAP_HAS_PID_FILTER) ||
  47                                 (props->caps & DVB_USB_ADAP_NEED_PID_FILTERING)) {
  48                                 info("will use the device's hardware PID filter (table count: %d).", props->pid_filter_count);
  49                                 adap->fe_adap[o].pid_filtering  = 1;
  50                                 adap->fe_adap[o].max_feed_count = props->pid_filter_count;
  51                         } else {
  52                                 info("will pass the complete MPEG2 transport stream to the software demuxer.");
  53                                 adap->fe_adap[o].pid_filtering  = 0;
  54                                 adap->fe_adap[o].max_feed_count = 255;
  55                         }
  56 
  57                         if (!adap->fe_adap[o].pid_filtering &&
  58                                 dvb_usb_force_pid_filter_usage &&
  59                                 props->caps & DVB_USB_ADAP_HAS_PID_FILTER) {
  60                                 info("pid filter enabled by module option.");
  61                                 adap->fe_adap[o].pid_filtering  = 1;
  62                                 adap->fe_adap[o].max_feed_count = props->pid_filter_count;
  63                         }
  64 
  65                         if (props->size_of_priv > 0) {
  66                                 adap->fe_adap[o].priv = kzalloc(props->size_of_priv, GFP_KERNEL);
  67                                 if (adap->fe_adap[o].priv == NULL) {
  68                                         err("no memory for priv for adapter %d fe %d.", n, o);
  69                                         return -ENOMEM;
  70                                 }
  71                         }
  72                 }
  73 
  74                 if (adap->props.size_of_priv > 0) {
  75                         adap->priv = kzalloc(adap->props.size_of_priv, GFP_KERNEL);
  76                         if (adap->priv == NULL) {
  77                                 err("no memory for priv for adapter %d.", n);
  78                                 return -ENOMEM;
  79                         }
  80                 }
  81 
  82                 if ((ret = dvb_usb_adapter_stream_init(adap)) ||
  83                         (ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) ||
  84                         (ret = dvb_usb_adapter_frontend_init(adap))) {
  85                         return ret;
  86                 }
  87 
  88                 /* use exclusive FE lock if there is multiple shared FEs */
  89                 if (adap->fe_adap[1].fe)
  90                         adap->dvb_adap.mfe_shared = 1;
  91 
  92                 d->num_adapters_initialized++;
  93                 d->state |= DVB_USB_STATE_DVB;
  94         }
  95 
  96         /*
  97          * when reloading the driver w/o replugging the device
  98          * sometimes a timeout occurs, this helps
  99          */
 100         if (d->props.generic_bulk_ctrl_endpoint != 0) {
 101                 usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
 102                 usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
 103         }
 104 
 105         return 0;
 106 }
 107 
 108 static int dvb_usb_adapter_exit(struct dvb_usb_device *d)
 109 {
 110         int n;
 111 
 112         for (n = 0; n < d->num_adapters_initialized; n++) {
 113                 dvb_usb_adapter_frontend_exit(&d->adapter[n]);
 114                 dvb_usb_adapter_dvb_exit(&d->adapter[n]);
 115                 dvb_usb_adapter_stream_exit(&d->adapter[n]);
 116                 kfree(d->adapter[n].priv);
 117         }
 118         d->num_adapters_initialized = 0;
 119         d->state &= ~DVB_USB_STATE_DVB;
 120         return 0;
 121 }
 122 
 123 
 124 /* general initialization functions */
 125 static int dvb_usb_exit(struct dvb_usb_device *d)
 126 {
 127         deb_info("state before exiting everything: %x\n", d->state);
 128         dvb_usb_remote_exit(d);
 129         dvb_usb_adapter_exit(d);
 130         dvb_usb_i2c_exit(d);
 131         deb_info("state should be zero now: %x\n", d->state);
 132         d->state = DVB_USB_STATE_INIT;
 133 
 134         if (d->priv != NULL && d->props.priv_destroy != NULL)
 135                 d->props.priv_destroy(d);
 136 
 137         kfree(d->priv);
 138         kfree(d);
 139         return 0;
 140 }
 141 
 142 static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums)
 143 {
 144         int ret = 0;
 145 
 146         mutex_init(&d->data_mutex);
 147         mutex_init(&d->usb_mutex);
 148         mutex_init(&d->i2c_mutex);
 149 
 150         d->state = DVB_USB_STATE_INIT;
 151 
 152         if (d->props.size_of_priv > 0) {
 153                 d->priv = kzalloc(d->props.size_of_priv, GFP_KERNEL);
 154                 if (d->priv == NULL) {
 155                         err("no memory for priv in 'struct dvb_usb_device'");
 156                         return -ENOMEM;
 157                 }
 158 
 159                 if (d->props.priv_init != NULL) {
 160                         ret = d->props.priv_init(d);
 161                         if (ret != 0) {
 162                                 kfree(d->priv);
 163                                 d->priv = NULL;
 164                                 return ret;
 165                         }
 166                 }
 167         }
 168 
 169         /* check the capabilities and set appropriate variables */
 170         dvb_usb_device_power_ctrl(d, 1);
 171 
 172         if ((ret = dvb_usb_i2c_init(d)) ||
 173                 (ret = dvb_usb_adapter_init(d, adapter_nums))) {
 174                 dvb_usb_exit(d);
 175                 return ret;
 176         }
 177 
 178         if ((ret = dvb_usb_remote_init(d)))
 179                 err("could not initialize remote control.");
 180 
 181         dvb_usb_device_power_ctrl(d, 0);
 182 
 183         return 0;
 184 }
 185 
 186 /* determine the name and the state of the just found USB device */
 187 static struct dvb_usb_device_description *dvb_usb_find_device(struct usb_device *udev, struct dvb_usb_device_properties *props, int *cold)
 188 {
 189         int i, j;
 190         struct dvb_usb_device_description *desc = NULL;
 191 
 192         *cold = -1;
 193 
 194         for (i = 0; i < props->num_device_descs; i++) {
 195 
 196                 for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].cold_ids[j] != NULL; j++) {
 197                         deb_info("check for cold %x %x\n", props->devices[i].cold_ids[j]->idVendor, props->devices[i].cold_ids[j]->idProduct);
 198                         if (props->devices[i].cold_ids[j]->idVendor  == le16_to_cpu(udev->descriptor.idVendor) &&
 199                                 props->devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) {
 200                                 *cold = 1;
 201                                 desc = &props->devices[i];
 202                                 break;
 203                         }
 204                 }
 205 
 206                 if (desc != NULL)
 207                         break;
 208 
 209                 for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].warm_ids[j] != NULL; j++) {
 210                         deb_info("check for warm %x %x\n", props->devices[i].warm_ids[j]->idVendor, props->devices[i].warm_ids[j]->idProduct);
 211                         if (props->devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) &&
 212                                 props->devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) {
 213                                 *cold = 0;
 214                                 desc = &props->devices[i];
 215                                 break;
 216                         }
 217                 }
 218         }
 219 
 220         if (desc != NULL && props->identify_state != NULL)
 221                 props->identify_state(udev, props, &desc, cold);
 222 
 223         return desc;
 224 }
 225 
 226 int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff)
 227 {
 228         if (onoff)
 229                 d->powered++;
 230         else
 231                 d->powered--;
 232 
 233         if (d->powered == 0 || (onoff && d->powered == 1)) { /* when switching from 1 to 0 or from 0 to 1 */
 234                 deb_info("power control: %d\n", onoff);
 235                 if (d->props.power_ctrl)
 236                         return d->props.power_ctrl(d, onoff);
 237         }
 238         return 0;
 239 }
 240 
 241 /*
 242  * USB
 243  */
 244 int dvb_usb_device_init(struct usb_interface *intf,
 245                         struct dvb_usb_device_properties *props,
 246                         struct module *owner, struct dvb_usb_device **du,
 247                         short *adapter_nums)
 248 {
 249         struct usb_device *udev = interface_to_usbdev(intf);
 250         struct dvb_usb_device *d = NULL;
 251         struct dvb_usb_device_description *desc = NULL;
 252 
 253         int ret = -ENOMEM, cold = 0;
 254 
 255         if (du != NULL)
 256                 *du = NULL;
 257 
 258         if ((desc = dvb_usb_find_device(udev, props, &cold)) == NULL) {
 259                 deb_err("something went very wrong, device was not found in current device list - let's see what comes next.\n");
 260                 return -ENODEV;
 261         }
 262 
 263         if (cold) {
 264                 info("found a '%s' in cold state, will try to load a firmware", desc->name);
 265                 ret = dvb_usb_download_firmware(udev, props);
 266                 if (!props->no_reconnect || ret != 0)
 267                         return ret;
 268         }
 269 
 270         info("found a '%s' in warm state.", desc->name);
 271         d = kzalloc(sizeof(struct dvb_usb_device), GFP_KERNEL);
 272         if (d == NULL) {
 273                 err("no memory for 'struct dvb_usb_device'");
 274                 return -ENOMEM;
 275         }
 276 
 277         d->udev = udev;
 278         memcpy(&d->props, props, sizeof(struct dvb_usb_device_properties));
 279         d->desc = desc;
 280         d->owner = owner;
 281 
 282         usb_set_intfdata(intf, d);
 283 
 284         if (du != NULL)
 285                 *du = d;
 286 
 287         ret = dvb_usb_init(d, adapter_nums);
 288 
 289         if (ret == 0)
 290                 info("%s successfully initialized and connected.", desc->name);
 291         else
 292                 info("%s error while loading driver (%d)", desc->name, ret);
 293         return ret;
 294 }
 295 EXPORT_SYMBOL(dvb_usb_device_init);
 296 
 297 void dvb_usb_device_exit(struct usb_interface *intf)
 298 {
 299         struct dvb_usb_device *d = usb_get_intfdata(intf);
 300         const char *default_name = "generic DVB-USB module";
 301         char name[40];
 302 
 303         usb_set_intfdata(intf, NULL);
 304         if (d != NULL && d->desc != NULL) {
 305                 strscpy(name, d->desc->name, sizeof(name));
 306                 dvb_usb_exit(d);
 307         } else {
 308                 strscpy(name, default_name, sizeof(name));
 309         }
 310         info("%s successfully deinitialized and disconnected.", name);
 311 
 312 }
 313 EXPORT_SYMBOL(dvb_usb_device_exit);
 314 
 315 MODULE_VERSION("1.0");
 316 MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
 317 MODULE_DESCRIPTION("A library module containing commonly used USB and DVB function USB DVB devices");
 318 MODULE_LICENSE("GPL");

/* [<][>][^][v][top][bottom][index][help] */