This source file includes following definitions.
- on26_read_regr
- on26_write_regr
- on26_connect
- on26_disconnect
- on26_test_port
- on26_read_block
- on26_write_block
- on26_log_adapter
- on26_init
- on26_exit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19 #define ON26_VERSION "1.04"
20
21 #include <linux/module.h>
22 #include <linux/init.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/wait.h>
27 #include <asm/io.h>
28
29 #include "paride.h"
30
31
32
33
34
35
36
37
38 #define j44(a,b) (((a>>4)&0x0f)|(b&0xf0))
39
40 #define P1 w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
41 #define P2 w2(5);w2(7);w2(5);w2(4);
42
43
44
45
46
47 static int on26_read_regr( PIA *pi, int cont, int regr )
48
49 { int a, b, r;
50
51 r = (regr<<2) + 1 + cont;
52
53 switch (pi->mode) {
54
55 case 0: w0(1); P1; w0(r); P2; w0(0); P1;
56 w2(6); a = r1(); w2(4);
57 w2(6); b = r1(); w2(4);
58 w2(6); w2(4); w2(6); w2(4);
59 return j44(a,b);
60
61 case 1: w0(1); P1; w0(r); P2; w0(0); P1;
62 w2(0x26); a = r0(); w2(4); w2(0x26); w2(4);
63 return a;
64
65 case 2:
66 case 3:
67 case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
68 w3(0); w3(0); w2(0x24); a = r4(); w2(4);
69 w2(0x24); (void)r4(); w2(4);
70 return a;
71
72 }
73 return -1;
74 }
75
76 static void on26_write_regr( PIA *pi, int cont, int regr, int val )
77
78 { int r;
79
80 r = (regr<<2) + 1 + cont;
81
82 switch (pi->mode) {
83
84 case 0:
85 case 1: w0(1); P1; w0(r); P2; w0(0); P1;
86 w0(val); P2; w0(val); P2;
87 break;
88
89 case 2:
90 case 3:
91 case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
92 w3(0); w3(0);
93 w2(5); w4(val); w2(4);
94 w2(5); w4(val); w2(4);
95 break;
96 }
97 }
98
99 #define CCP(x) w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
100 w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
101
102 static void on26_connect ( PIA *pi )
103
104 { int x;
105
106 pi->saved_r0 = r0();
107 pi->saved_r2 = r2();
108
109 CCP(0x20);
110 x = 8; if (pi->mode) x = 9;
111
112 w0(2); P1; w0(8); P2;
113 w0(2); P1; w0(x); P2;
114 }
115
116 static void on26_disconnect ( PIA *pi )
117
118 { if (pi->mode >= 2) { w3(4); w3(4); w3(4); w3(4); }
119 else { w0(4); P1; w0(4); P1; }
120 CCP(0x30);
121 w0(pi->saved_r0);
122 w2(pi->saved_r2);
123 }
124
125 #define RESET_WAIT 200
126
127 static int on26_test_port( PIA *pi)
128
129 { int i, m, d, x=0, y=0;
130
131 pi->saved_r0 = r0();
132 pi->saved_r2 = r2();
133
134 d = pi->delay;
135 m = pi->mode;
136 pi->delay = 5;
137 pi->mode = 0;
138
139 w2(0xc);
140
141 CCP(0x30); CCP(0);
142
143 w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);
144 i = ((r1() & 0xf0) << 4); w0(0x87);
145 i |= (r1() & 0xf0); w0(0x78);
146 w0(0x20);w2(4);w2(5);
147 i |= ((r1() & 0xf0) >> 4);
148 w2(4);w0(0xff);
149
150 if (i == 0xb5f) {
151
152 w0(2); P1; w0(0); P2;
153 w0(3); P1; w0(0); P2;
154 w0(2); P1; w0(8); P2; udelay(100);
155 w0(2); P1; w0(0xa); P2; udelay(100);
156 w0(2); P1; w0(8); P2; udelay(1000);
157
158 on26_write_regr(pi,0,6,0xa0);
159
160 for (i=0;i<RESET_WAIT;i++) {
161 on26_write_regr(pi,0,6,0xa0);
162 x = on26_read_regr(pi,0,7);
163 on26_write_regr(pi,0,6,0xb0);
164 y = on26_read_regr(pi,0,7);
165 if (!((x&0x80)||(y&0x80))) break;
166 mdelay(100);
167 }
168
169 if (i == RESET_WAIT)
170 printk("on26: Device reset failed (%x,%x)\n",x,y);
171
172 w0(4); P1; w0(4); P1;
173 }
174
175 CCP(0x30);
176
177 pi->delay = d;
178 pi->mode = m;
179 w0(pi->saved_r0);
180 w2(pi->saved_r2);
181
182 return 5;
183 }
184
185
186 static void on26_read_block( PIA *pi, char * buf, int count )
187
188 { int k, a, b;
189
190 switch (pi->mode) {
191
192 case 0: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1;
193 udelay(10);
194 for (k=0;k<count;k++) {
195 w2(6); a = r1();
196 w2(4); b = r1();
197 buf[k] = j44(a,b);
198 }
199 w0(2); P1; w0(8); P2;
200 break;
201
202 case 1: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1;
203 udelay(10);
204 for (k=0;k<count/2;k++) {
205 w2(0x26); buf[2*k] = r0();
206 w2(0x24); buf[2*k+1] = r0();
207 }
208 w0(2); P1; w0(9); P2;
209 break;
210
211 case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
212 w3(0); w3(0); w2(0x24);
213 udelay(10);
214 for (k=0;k<count;k++) buf[k] = r4();
215 w2(4);
216 break;
217
218 case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
219 w3(0); w3(0); w2(0x24);
220 udelay(10);
221 for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
222 w2(4);
223 break;
224
225 case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
226 w3(0); w3(0); w2(0x24);
227 udelay(10);
228 for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
229 w2(4);
230 break;
231
232 }
233 }
234
235 static void on26_write_block( PIA *pi, char * buf, int count )
236
237 { int k;
238
239 switch (pi->mode) {
240
241 case 0:
242 case 1: w0(1); P1; w0(1); P2;
243 w0(2); P1; w0(0x18+pi->mode); P2; w0(0); P1;
244 udelay(10);
245 for (k=0;k<count/2;k++) {
246 w2(5); w0(buf[2*k]);
247 w2(7); w0(buf[2*k+1]);
248 }
249 w2(5); w2(4);
250 w0(2); P1; w0(8+pi->mode); P2;
251 break;
252
253 case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
254 w3(0); w3(0); w2(0xc5);
255 udelay(10);
256 for (k=0;k<count;k++) w4(buf[k]);
257 w2(0xc4);
258 break;
259
260 case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
261 w3(0); w3(0); w2(0xc5);
262 udelay(10);
263 for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
264 w2(0xc4);
265 break;
266
267 case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
268 w3(0); w3(0); w2(0xc5);
269 udelay(10);
270 for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
271 w2(0xc4);
272 break;
273
274 }
275
276 }
277
278 static void on26_log_adapter( PIA *pi, char * scratch, int verbose )
279
280 { char *mode_string[5] = {"4-bit","8-bit","EPP-8",
281 "EPP-16","EPP-32"};
282
283 printk("%s: on26 %s, OnSpec 90c26 at 0x%x, ",
284 pi->device,ON26_VERSION,pi->port);
285 printk("mode %d (%s), delay %d\n",pi->mode,
286 mode_string[pi->mode],pi->delay);
287
288 }
289
290 static struct pi_protocol on26 = {
291 .owner = THIS_MODULE,
292 .name = "on26",
293 .max_mode = 5,
294 .epp_first = 2,
295 .default_delay = 1,
296 .max_units = 1,
297 .write_regr = on26_write_regr,
298 .read_regr = on26_read_regr,
299 .write_block = on26_write_block,
300 .read_block = on26_read_block,
301 .connect = on26_connect,
302 .disconnect = on26_disconnect,
303 .test_port = on26_test_port,
304 .log_adapter = on26_log_adapter,
305 };
306
307 static int __init on26_init(void)
308 {
309 return paride_register(&on26);
310 }
311
312 static void __exit on26_exit(void)
313 {
314 paride_unregister(&on26);
315 }
316
317 MODULE_LICENSE("GPL");
318 module_init(on26_init)
319 module_exit(on26_exit)