root/arch/mips/include/asm/mips-cpc.h

INCLUDED FROM

DEFINITIONS

1. mips_cpc_probe
2. mips_cpc_present
3. CPC_CX_ACCESSOR_RW
4. mips_cpc_unlock_other

   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2 /*
   3  * Copyright (C) 2013 Imagination Technologies
   4  * Author: Paul Burton <paul.burton@mips.com>
   5  */
   6 
   7 #ifndef __MIPS_ASM_MIPS_CPS_H__
   8 # error Please include asm/mips-cps.h rather than asm/mips-cpc.h
   9 #endif
  10 
  11 #ifndef __MIPS_ASM_MIPS_CPC_H__
  12 #define __MIPS_ASM_MIPS_CPC_H__
  13 
  14 #include <linux/bitops.h>
  15 #include <linux/errno.h>
  16 
  17 /* The base address of the CPC registers */
  18 extern void __iomem *mips_cpc_base;
  19 
  20 /**
  21  * mips_cpc_default_phys_base - retrieve the default physical base address of
  22  *                              the CPC
  23  *
  24  * Returns the default physical base address of the Cluster Power Controller
  25  * memory mapped registers. This is platform dependant & must therefore be
  26  * implemented per-platform.
  27  */
  28 extern phys_addr_t mips_cpc_default_phys_base(void);
  29 
  30 /**
  31  * mips_cpc_probe - probe for a Cluster Power Controller
  32  *
  33  * Attempt to detect the presence of a Cluster Power Controller. Returns 0 if
  34  * a CPC is successfully detected, else -errno.
  35  */
  36 #ifdef CONFIG_MIPS_CPC
  37 extern int mips_cpc_probe(void);
  38 #else
  39 static inline int mips_cpc_probe(void)
  40 {
  41         return -ENODEV;
  42 }
  43 #endif
  44 
  45 /**
  46  * mips_cpc_present - determine whether a Cluster Power Controller is present
  47  *
  48  * Returns true if a CPC is present in the system, else false.
  49  */
  50 static inline bool mips_cpc_present(void)
  51 {
  52 #ifdef CONFIG_MIPS_CPC
  53         return mips_cpc_base != NULL;
  54 #else
  55         return false;
  56 #endif
  57 }
  58 
  59 /* Offsets from the CPC base address to various control blocks */
  60 #define MIPS_CPC_GCB_OFS        0x0000
  61 #define MIPS_CPC_CLCB_OFS       0x2000
  62 #define MIPS_CPC_COCB_OFS       0x4000
  63 
  64 #define CPC_ACCESSOR_RO(sz, off, name)                                  \
  65         CPS_ACCESSOR_RO(cpc, sz, MIPS_CPC_GCB_OFS + off, name)          \
  66         CPS_ACCESSOR_RO(cpc, sz, MIPS_CPC_COCB_OFS + off, redir_##name)
  67 
  68 #define CPC_ACCESSOR_RW(sz, off, name)                                  \
  69         CPS_ACCESSOR_RW(cpc, sz, MIPS_CPC_GCB_OFS + off, name)          \
  70         CPS_ACCESSOR_RW(cpc, sz, MIPS_CPC_COCB_OFS + off, redir_##name)
  71 
  72 #define CPC_CX_ACCESSOR_RO(sz, off, name)                               \
  73         CPS_ACCESSOR_RO(cpc, sz, MIPS_CPC_CLCB_OFS + off, cl_##name)    \
  74         CPS_ACCESSOR_RO(cpc, sz, MIPS_CPC_COCB_OFS + off, co_##name)
  75 
  76 #define CPC_CX_ACCESSOR_RW(sz, off, name)                               \
  77         CPS_ACCESSOR_RW(cpc, sz, MIPS_CPC_CLCB_OFS + off, cl_##name)    \
  78         CPS_ACCESSOR_RW(cpc, sz, MIPS_CPC_COCB_OFS + off, co_##name)
  79 
  80 /* CPC_ACCESS - Control core/IOCU access to CPC registers prior to CM 3 */
  81 CPC_ACCESSOR_RW(32, 0x000, access)
  82 
  83 /* CPC_SEQDEL - Configure delays between command sequencer steps */
  84 CPC_ACCESSOR_RW(32, 0x008, seqdel)
  85 
  86 /* CPC_RAIL - Configure the delay from rail power-up to stability */
  87 CPC_ACCESSOR_RW(32, 0x010, rail)
  88 
  89 /* CPC_RESETLEN - Configure the length of reset sequences */
  90 CPC_ACCESSOR_RW(32, 0x018, resetlen)
  91 
  92 /* CPC_REVISION - Indicates the revisison of the CPC */
  93 CPC_ACCESSOR_RO(32, 0x020, revision)
  94 
  95 /* CPC_PWRUP_CTL - Control power to the Coherence Manager (CM) */
  96 CPC_ACCESSOR_RW(32, 0x030, pwrup_ctl)
  97 #define CPC_PWRUP_CTL_CM_PWRUP                  BIT(0)
  98 
  99 /* CPC_CONFIG - Mirrors GCR_CONFIG */
 100 CPC_ACCESSOR_RW(64, 0x138, config)
 101 
 102 /* CPC_SYS_CONFIG - Control cluster endianness */
 103 CPC_ACCESSOR_RW(32, 0x140, sys_config)
 104 #define CPC_SYS_CONFIG_BE_IMMEDIATE             BIT(2)
 105 #define CPC_SYS_CONFIG_BE_STATUS                BIT(1)
 106 #define CPC_SYS_CONFIG_BE                       BIT(0)
 107 
 108 /* CPC_Cx_CMD - Instruct the CPC to take action on a core */
 109 CPC_CX_ACCESSOR_RW(32, 0x000, cmd)
 110 #define CPC_Cx_CMD                              GENMASK(3, 0)
 111 #define  CPC_Cx_CMD_CLOCKOFF                    0x1
 112 #define  CPC_Cx_CMD_PWRDOWN                     0x2
 113 #define  CPC_Cx_CMD_PWRUP                       0x3
 114 #define  CPC_Cx_CMD_RESET                       0x4
 115 
 116 /* CPC_Cx_STAT_CONF - Indicates core configuration & state */
 117 CPC_CX_ACCESSOR_RW(32, 0x008, stat_conf)
 118 #define CPC_Cx_STAT_CONF_PWRUPE                 BIT(23)
 119 #define CPC_Cx_STAT_CONF_SEQSTATE               GENMASK(22, 19)
 120 #define  CPC_Cx_STAT_CONF_SEQSTATE_D0           0x0
 121 #define  CPC_Cx_STAT_CONF_SEQSTATE_U0           0x1
 122 #define  CPC_Cx_STAT_CONF_SEQSTATE_U1           0x2
 123 #define  CPC_Cx_STAT_CONF_SEQSTATE_U2           0x3
 124 #define  CPC_Cx_STAT_CONF_SEQSTATE_U3           0x4
 125 #define  CPC_Cx_STAT_CONF_SEQSTATE_U4           0x5
 126 #define  CPC_Cx_STAT_CONF_SEQSTATE_U5           0x6
 127 #define  CPC_Cx_STAT_CONF_SEQSTATE_U6           0x7
 128 #define  CPC_Cx_STAT_CONF_SEQSTATE_D1           0x8
 129 #define  CPC_Cx_STAT_CONF_SEQSTATE_D3           0x9
 130 #define  CPC_Cx_STAT_CONF_SEQSTATE_D2           0xa
 131 #define CPC_Cx_STAT_CONF_CLKGAT_IMPL            BIT(17)
 132 #define CPC_Cx_STAT_CONF_PWRDN_IMPL             BIT(16)
 133 #define CPC_Cx_STAT_CONF_EJTAG_PROBE            BIT(15)
 134 
 135 /* CPC_Cx_OTHER - Configure the core-other register block prior to CM 3 */
 136 CPC_CX_ACCESSOR_RW(32, 0x010, other)
 137 #define CPC_Cx_OTHER_CORENUM                    GENMASK(23, 16)
 138 
 139 /* CPC_Cx_VP_STOP - Stop Virtual Processors (VPs) within a core from running */
 140 CPC_CX_ACCESSOR_RW(32, 0x020, vp_stop)
 141 
 142 /* CPC_Cx_VP_START - Start Virtual Processors (VPs) within a core running */
 143 CPC_CX_ACCESSOR_RW(32, 0x028, vp_run)
 144 
 145 /* CPC_Cx_VP_RUNNING - Indicate which Virtual Processors (VPs) are running */
 146 CPC_CX_ACCESSOR_RW(32, 0x030, vp_running)
 147 
 148 /* CPC_Cx_CONFIG - Mirrors GCR_Cx_CONFIG */
 149 CPC_CX_ACCESSOR_RW(32, 0x090, config)
 150 
 151 #ifdef CONFIG_MIPS_CPC
 152 
 153 /**
 154  * mips_cpc_lock_other - lock access to another core
 155  * core: the other core to be accessed
 156  *
 157  * Call before operating upon a core via the 'other' register region in
 158  * order to prevent the region being moved during access. Must be called
 159  * within the bounds of a mips_cm_{lock,unlock}_other pair, and followed
 160  * by a call to mips_cpc_unlock_other.
 161  */
 162 extern void mips_cpc_lock_other(unsigned int core);
 163 
 164 /**
 165  * mips_cpc_unlock_other - unlock access to another core
 166  *
 167  * Call after operating upon another core via the 'other' register region.
 168  * Must be called after mips_cpc_lock_other.
 169  */
 170 extern void mips_cpc_unlock_other(void);
 171 
 172 #else /* !CONFIG_MIPS_CPC */
 173 
 174 static inline void mips_cpc_lock_other(unsigned int core) { }
 175 static inline void mips_cpc_unlock_other(void) { }
 176 
 177 #endif /* !CONFIG_MIPS_CPC */
 178 
 179 #endif /* __MIPS_ASM_MIPS_CPC_H__ */