This source file includes following definitions.
- rt_timer_w32
- rt_timer_r32
- rt_timer_irq
- rt_timer_request
- rt_timer_config
- rt_timer_enable
- rt_timer_probe
1
2
3
4
5
6
7
8
9 #include <linux/platform_device.h>
10 #include <linux/interrupt.h>
11 #include <linux/timer.h>
12 #include <linux/of_gpio.h>
13 #include <linux/clk.h>
14
15 #include <asm/mach-ralink/ralink_regs.h>
16
17 #define TIMER_REG_TMRSTAT 0x00
18 #define TIMER_REG_TMR0LOAD 0x10
19 #define TIMER_REG_TMR0CTL 0x18
20
21 #define TMRSTAT_TMR0INT BIT(0)
22
23 #define TMR0CTL_ENABLE BIT(7)
24 #define TMR0CTL_MODE_PERIODIC BIT(4)
25 #define TMR0CTL_PRESCALER 1
26 #define TMR0CTL_PRESCALE_VAL (0xf - TMR0CTL_PRESCALER)
27 #define TMR0CTL_PRESCALE_DIV (65536 / BIT(TMR0CTL_PRESCALER))
28
29 struct rt_timer {
30 struct device *dev;
31 void __iomem *membase;
32 int irq;
33 unsigned long timer_freq;
34 unsigned long timer_div;
35 };
36
37 static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
38 {
39 __raw_writel(val, rt->membase + reg);
40 }
41
42 static inline u32 rt_timer_r32(struct rt_timer *rt, u8 reg)
43 {
44 return __raw_readl(rt->membase + reg);
45 }
46
47 static irqreturn_t rt_timer_irq(int irq, void *_rt)
48 {
49 struct rt_timer *rt = (struct rt_timer *) _rt;
50
51 rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
52 rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT);
53
54 return IRQ_HANDLED;
55 }
56
57
58 static int rt_timer_request(struct rt_timer *rt)
59 {
60 int err = request_irq(rt->irq, rt_timer_irq, 0,
61 dev_name(rt->dev), rt);
62 if (err) {
63 dev_err(rt->dev, "failed to request irq\n");
64 } else {
65 u32 t = TMR0CTL_MODE_PERIODIC | TMR0CTL_PRESCALE_VAL;
66 rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
67 }
68 return err;
69 }
70
71 static int rt_timer_config(struct rt_timer *rt, unsigned long divisor)
72 {
73 if (rt->timer_freq < divisor)
74 rt->timer_div = rt->timer_freq;
75 else
76 rt->timer_div = divisor;
77
78 rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
79
80 return 0;
81 }
82
83 static int rt_timer_enable(struct rt_timer *rt)
84 {
85 u32 t;
86
87 rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
88
89 t = rt_timer_r32(rt, TIMER_REG_TMR0CTL);
90 t |= TMR0CTL_ENABLE;
91 rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
92
93 return 0;
94 }
95
96 static int rt_timer_probe(struct platform_device *pdev)
97 {
98 struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
99 struct rt_timer *rt;
100 struct clk *clk;
101
102 rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL);
103 if (!rt) {
104 dev_err(&pdev->dev, "failed to allocate memory\n");
105 return -ENOMEM;
106 }
107
108 rt->irq = platform_get_irq(pdev, 0);
109 if (rt->irq < 0)
110 return rt->irq;
111
112 rt->membase = devm_ioremap_resource(&pdev->dev, res);
113 if (IS_ERR(rt->membase))
114 return PTR_ERR(rt->membase);
115
116 clk = devm_clk_get(&pdev->dev, NULL);
117 if (IS_ERR(clk)) {
118 dev_err(&pdev->dev, "failed get clock rate\n");
119 return PTR_ERR(clk);
120 }
121
122 rt->timer_freq = clk_get_rate(clk) / TMR0CTL_PRESCALE_DIV;
123 if (!rt->timer_freq)
124 return -EINVAL;
125
126 rt->dev = &pdev->dev;
127 platform_set_drvdata(pdev, rt);
128
129 rt_timer_request(rt);
130 rt_timer_config(rt, 2);
131 rt_timer_enable(rt);
132
133 dev_info(&pdev->dev, "maximum frequency is %luHz\n", rt->timer_freq);
134
135 return 0;
136 }
137
138 static const struct of_device_id rt_timer_match[] = {
139 { .compatible = "ralink,rt2880-timer" },
140 {},
141 };
142
143 static struct platform_driver rt_timer_driver = {
144 .probe = rt_timer_probe,
145 .driver = {
146 .name = "rt-timer",
147 .of_match_table = rt_timer_match,
148 .suppress_bind_attrs = true,
149 },
150 };
151 builtin_platform_driver(rt_timer_driver);