This source file includes following definitions.
- atp867x_set_dmamode
- atp867x_get_active_clocks_shifted
- atp867x_get_recover_clocks_shifted
- atp867x_set_piomode
- atp867x_cable_override
- atp867x_cable_detect
- atp867x_check_res
- atp867x_check_ports
- atp867x_set_priv
- atp867x_fixup
- atp867x_ata_pci_sff_init_host
- atp867x_init_one
- atp867x_reinit_one
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/pci.h>
18 #include <linux/blkdev.h>
19 #include <linux/delay.h>
20 #include <linux/device.h>
21 #include <linux/gfp.h>
22 #include <scsi/scsi_host.h>
23 #include <linux/libata.h>
24
25 #define DRV_NAME "pata_atp867x"
26 #define DRV_VERSION "0.7.5"
27
28
29
30
31
32
33 enum {
34 ATP867X_IO_CHANNEL_OFFSET = 0x10,
35
36
37
38
39
40 ATP867X_IO_PIOSPD_ACTIVE_SHIFT = 4,
41 ATP867X_IO_PIOSPD_RECOVER_SHIFT = 0,
42
43 ATP867X_IO_DMAMODE_MSTR_SHIFT = 0,
44 ATP867X_IO_DMAMODE_MSTR_MASK = 0x07,
45 ATP867X_IO_DMAMODE_SLAVE_SHIFT = 4,
46 ATP867X_IO_DMAMODE_SLAVE_MASK = 0x70,
47
48 ATP867X_IO_DMAMODE_UDMA_6 = 0x07,
49 ATP867X_IO_DMAMODE_UDMA_5 = 0x06,
50 ATP867X_IO_DMAMODE_UDMA_4 = 0x05,
51 ATP867X_IO_DMAMODE_UDMA_3 = 0x04,
52 ATP867X_IO_DMAMODE_UDMA_2 = 0x03,
53 ATP867X_IO_DMAMODE_UDMA_1 = 0x02,
54 ATP867X_IO_DMAMODE_UDMA_0 = 0x01,
55 ATP867X_IO_DMAMODE_DISABLE = 0x00,
56
57 ATP867X_IO_SYS_INFO_66MHZ = 0x04,
58 ATP867X_IO_SYS_INFO_SLOW_UDMA5 = 0x02,
59 ATP867X_IO_SYS_MASK_RESERVED = (~0xf1),
60
61 ATP867X_IO_PORTSPD_VAL = 0x1143,
62 ATP867X_PREREAD_VAL = 0x0200,
63
64 ATP867X_NUM_PORTS = 4,
65 ATP867X_BAR_IOBASE = 0,
66 ATP867X_BAR_ROMBASE = 6,
67 };
68
69 #define ATP867X_IOBASE(ap) ((ap)->host->iomap[0])
70 #define ATP867X_SYS_INFO(ap) (0x3F + ATP867X_IOBASE(ap))
71
72 #define ATP867X_IO_PORTBASE(ap, port) (0x00 + ATP867X_IOBASE(ap) + \
73 (port) * ATP867X_IO_CHANNEL_OFFSET)
74 #define ATP867X_IO_DMABASE(ap, port) (0x40 + \
75 ATP867X_IO_PORTBASE((ap), (port)))
76
77 #define ATP867X_IO_STATUS(ap, port) (0x07 + \
78 ATP867X_IO_PORTBASE((ap), (port)))
79 #define ATP867X_IO_ALTSTATUS(ap, port) (0x0E + \
80 ATP867X_IO_PORTBASE((ap), (port)))
81
82
83
84
85 #define ATP867X_IO_MSTRPIOSPD(ap, port) (0x08 + \
86 ATP867X_IO_DMABASE((ap), (port)))
87 #define ATP867X_IO_SLAVPIOSPD(ap, port) (0x09 + \
88 ATP867X_IO_DMABASE((ap), (port)))
89 #define ATP867X_IO_8BPIOSPD(ap, port) (0x0A + \
90 ATP867X_IO_DMABASE((ap), (port)))
91 #define ATP867X_IO_DMAMODE(ap, port) (0x0B + \
92 ATP867X_IO_DMABASE((ap), (port)))
93
94 #define ATP867X_IO_PORTSPD(ap, port) (0x4A + \
95 ATP867X_IO_PORTBASE((ap), (port)))
96 #define ATP867X_IO_PREREAD(ap, port) (0x4C + \
97 ATP867X_IO_PORTBASE((ap), (port)))
98
99 struct atp867x_priv {
100 void __iomem *dma_mode;
101 void __iomem *mstr_piospd;
102 void __iomem *slave_piospd;
103 void __iomem *eightb_piospd;
104 int pci66mhz;
105 };
106
107 static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
108 {
109 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
110 struct atp867x_priv *dp = ap->private_data;
111 u8 speed = adev->dma_mode;
112 u8 b;
113 u8 mode = speed - XFER_UDMA_0 + 1;
114
115
116
117
118
119
120
121
122 if (dp->pci66mhz && mode > ATP867X_IO_DMAMODE_UDMA_0 &&
123 (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B ||
124 mode < ATP867X_IO_DMAMODE_UDMA_5))
125 mode--;
126
127 b = ioread8(dp->dma_mode);
128 if (adev->devno & 1) {
129 b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK) |
130 (mode << ATP867X_IO_DMAMODE_SLAVE_SHIFT);
131 } else {
132 b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK) |
133 (mode << ATP867X_IO_DMAMODE_MSTR_SHIFT);
134 }
135 iowrite8(b, dp->dma_mode);
136 }
137
138 static int atp867x_get_active_clocks_shifted(struct ata_port *ap,
139 unsigned int clk)
140 {
141 struct atp867x_priv *dp = ap->private_data;
142 unsigned char clocks = clk;
143
144
145
146
147
148 if (dp->pci66mhz)
149 clocks++;
150
151 switch (clocks) {
152 case 0:
153 clocks = 1;
154 break;
155 case 1 ... 6:
156 break;
157 default:
158 printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
159 "Using 12clk.\n", clk);
160
161 case 9 ... 12:
162 clocks = 7;
163 break;
164 case 7:
165 case 8:
166 clocks = 0;
167 goto active_clock_shift_done;
168 }
169
170 active_clock_shift_done:
171 return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
172 }
173
174 static int atp867x_get_recover_clocks_shifted(unsigned int clk)
175 {
176 unsigned char clocks = clk;
177
178 switch (clocks) {
179 case 0:
180 clocks = 1;
181 break;
182 case 1 ... 11:
183 break;
184 case 13:
185 case 14:
186 --clocks;
187 break;
188 case 15:
189 break;
190 default:
191 printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
192 "Using default 12clk.\n", clk);
193
194 case 12:
195 clocks = 0;
196 break;
197 }
198
199 return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
200 }
201
202 static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
203 {
204 struct ata_device *peer = ata_dev_pair(adev);
205 struct atp867x_priv *dp = ap->private_data;
206 u8 speed = adev->pio_mode;
207 struct ata_timing t, p;
208 int T, UT;
209 u8 b;
210
211 T = 1000000000 / 33333;
212 UT = T / 4;
213
214 ata_timing_compute(adev, speed, &t, T, UT);
215 if (peer && peer->pio_mode) {
216 ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
217 ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
218 }
219
220 b = ioread8(dp->dma_mode);
221 if (adev->devno & 1)
222 b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK);
223 else
224 b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
225 iowrite8(b, dp->dma_mode);
226
227 b = atp867x_get_active_clocks_shifted(ap, t.active) |
228 atp867x_get_recover_clocks_shifted(t.recover);
229
230 if (adev->devno & 1)
231 iowrite8(b, dp->slave_piospd);
232 else
233 iowrite8(b, dp->mstr_piospd);
234
235 b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
236 atp867x_get_recover_clocks_shifted(t.rec8b);
237
238 iowrite8(b, dp->eightb_piospd);
239 }
240
241 static int atp867x_cable_override(struct pci_dev *pdev)
242 {
243 if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP &&
244 (pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A ||
245 pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) {
246 return 1;
247 }
248 return 0;
249 }
250
251 static int atp867x_cable_detect(struct ata_port *ap)
252 {
253 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
254
255 if (atp867x_cable_override(pdev))
256 return ATA_CBL_PATA40_SHORT;
257
258 return ATA_CBL_PATA_UNK;
259 }
260
261 static struct scsi_host_template atp867x_sht = {
262 ATA_BMDMA_SHT(DRV_NAME),
263 };
264
265 static struct ata_port_operations atp867x_ops = {
266 .inherits = &ata_bmdma_port_ops,
267 .cable_detect = atp867x_cable_detect,
268 .set_piomode = atp867x_set_piomode,
269 .set_dmamode = atp867x_set_dmamode,
270 };
271
272
273 #ifdef ATP867X_DEBUG
274 static void atp867x_check_res(struct pci_dev *pdev)
275 {
276 int i;
277 unsigned long start, len;
278
279
280 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
281 start = pci_resource_start(pdev, i);
282 len = pci_resource_len(pdev, i);
283 printk(KERN_DEBUG "ATP867X: resource start:len=%lx:%lx\n",
284 start, len);
285 }
286 }
287
288 static void atp867x_check_ports(struct ata_port *ap, int port)
289 {
290 struct ata_ioports *ioaddr = &ap->ioaddr;
291 struct atp867x_priv *dp = ap->private_data;
292
293 printk(KERN_DEBUG "ATP867X: port[%d] addresses\n"
294 " cmd_addr =0x%llx, 0x%llx\n"
295 " ctl_addr =0x%llx, 0x%llx\n"
296 " bmdma_addr =0x%llx, 0x%llx\n"
297 " data_addr =0x%llx\n"
298 " error_addr =0x%llx\n"
299 " feature_addr =0x%llx\n"
300 " nsect_addr =0x%llx\n"
301 " lbal_addr =0x%llx\n"
302 " lbam_addr =0x%llx\n"
303 " lbah_addr =0x%llx\n"
304 " device_addr =0x%llx\n"
305 " status_addr =0x%llx\n"
306 " command_addr =0x%llx\n"
307 " dp->dma_mode =0x%llx\n"
308 " dp->mstr_piospd =0x%llx\n"
309 " dp->slave_piospd =0x%llx\n"
310 " dp->eightb_piospd =0x%llx\n"
311 " dp->pci66mhz =0x%lx\n",
312 port,
313 (unsigned long long)ioaddr->cmd_addr,
314 (unsigned long long)ATP867X_IO_PORTBASE(ap, port),
315 (unsigned long long)ioaddr->ctl_addr,
316 (unsigned long long)ATP867X_IO_ALTSTATUS(ap, port),
317 (unsigned long long)ioaddr->bmdma_addr,
318 (unsigned long long)ATP867X_IO_DMABASE(ap, port),
319 (unsigned long long)ioaddr->data_addr,
320 (unsigned long long)ioaddr->error_addr,
321 (unsigned long long)ioaddr->feature_addr,
322 (unsigned long long)ioaddr->nsect_addr,
323 (unsigned long long)ioaddr->lbal_addr,
324 (unsigned long long)ioaddr->lbam_addr,
325 (unsigned long long)ioaddr->lbah_addr,
326 (unsigned long long)ioaddr->device_addr,
327 (unsigned long long)ioaddr->status_addr,
328 (unsigned long long)ioaddr->command_addr,
329 (unsigned long long)dp->dma_mode,
330 (unsigned long long)dp->mstr_piospd,
331 (unsigned long long)dp->slave_piospd,
332 (unsigned long long)dp->eightb_piospd,
333 (unsigned long)dp->pci66mhz);
334 }
335 #endif
336
337 static int atp867x_set_priv(struct ata_port *ap)
338 {
339 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
340 struct atp867x_priv *dp;
341 int port = ap->port_no;
342
343 dp = ap->private_data =
344 devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
345 if (dp == NULL)
346 return -ENOMEM;
347
348 dp->dma_mode = ATP867X_IO_DMAMODE(ap, port);
349 dp->mstr_piospd = ATP867X_IO_MSTRPIOSPD(ap, port);
350 dp->slave_piospd = ATP867X_IO_SLAVPIOSPD(ap, port);
351 dp->eightb_piospd = ATP867X_IO_8BPIOSPD(ap, port);
352
353 dp->pci66mhz =
354 ioread8(ATP867X_SYS_INFO(ap)) & ATP867X_IO_SYS_INFO_66MHZ;
355
356 return 0;
357 }
358
359 static void atp867x_fixup(struct ata_host *host)
360 {
361 struct pci_dev *pdev = to_pci_dev(host->dev);
362 struct ata_port *ap = host->ports[0];
363 int i;
364 u8 v;
365
366
367
368
369 pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &v);
370 if (v < 0x80) {
371 v = 0x80;
372 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, v);
373 printk(KERN_DEBUG "ATP867X: set latency timer of device %s"
374 " to %d\n", pci_name(pdev), v);
375 }
376
377
378
379
380
381 for (i = 0; i < ATP867X_NUM_PORTS; i++)
382 iowrite16(ATP867X_IO_PORTSPD_VAL, ATP867X_IO_PORTSPD(ap, i));
383
384
385
386
387 for (i = 0; i < ATP867X_NUM_PORTS; i++)
388 iowrite16(ATP867X_PREREAD_VAL, ATP867X_IO_PREREAD(ap, i));
389
390 v = ioread8(ATP867X_IOBASE(ap) + 0x28);
391 v &= 0xcf;
392 v |= 0xc0;
393 iowrite8(v, ATP867X_IOBASE(ap) + 0x28);
394
395
396
397
398 v = ioread8(ATP867X_SYS_INFO(ap));
399 v &= ATP867X_IO_SYS_MASK_RESERVED;
400 if (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B)
401 v |= ATP867X_IO_SYS_INFO_SLOW_UDMA5;
402 iowrite8(v, ATP867X_SYS_INFO(ap));
403 }
404
405 static int atp867x_ata_pci_sff_init_host(struct ata_host *host)
406 {
407 struct device *gdev = host->dev;
408 struct pci_dev *pdev = to_pci_dev(gdev);
409 unsigned int mask = 0;
410 int i, rc;
411
412
413
414
415 rc = pcim_iomap_regions(pdev, 1 << ATP867X_BAR_IOBASE, DRV_NAME);
416 if (rc == -EBUSY)
417 pcim_pin_device(pdev);
418 if (rc)
419 return rc;
420 host->iomap = pcim_iomap_table(pdev);
421
422 #ifdef ATP867X_DEBUG
423 atp867x_check_res(pdev);
424
425 for (i = 0; i < PCI_ROM_RESOURCE; i++)
426 printk(KERN_DEBUG "ATP867X: iomap[%d]=0x%llx\n", i,
427 (unsigned long long)(host->iomap[i]));
428 #endif
429
430
431
432
433 for (i = 0; i < host->n_ports; i++) {
434 struct ata_port *ap = host->ports[i];
435 struct ata_ioports *ioaddr = &ap->ioaddr;
436
437 ioaddr->cmd_addr = ATP867X_IO_PORTBASE(ap, i);
438 ioaddr->ctl_addr = ioaddr->altstatus_addr
439 = ATP867X_IO_ALTSTATUS(ap, i);
440 ioaddr->bmdma_addr = ATP867X_IO_DMABASE(ap, i);
441
442 ata_sff_std_ports(ioaddr);
443 rc = atp867x_set_priv(ap);
444 if (rc)
445 return rc;
446
447 #ifdef ATP867X_DEBUG
448 atp867x_check_ports(ap, i);
449 #endif
450 ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
451 (unsigned long)ioaddr->cmd_addr,
452 (unsigned long)ioaddr->ctl_addr);
453 ata_port_desc(ap, "bmdma 0x%lx",
454 (unsigned long)ioaddr->bmdma_addr);
455
456 mask |= 1 << i;
457 }
458
459 if (!mask) {
460 dev_err(gdev, "no available native port\n");
461 return -ENODEV;
462 }
463
464 atp867x_fixup(host);
465
466 return dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
467 }
468
469 static int atp867x_init_one(struct pci_dev *pdev,
470 const struct pci_device_id *id)
471 {
472 static const struct ata_port_info info_867x = {
473 .flags = ATA_FLAG_SLAVE_POSS,
474 .pio_mask = ATA_PIO4,
475 .udma_mask = ATA_UDMA6,
476 .port_ops = &atp867x_ops,
477 };
478
479 struct ata_host *host;
480 const struct ata_port_info *ppi[] = { &info_867x, NULL };
481 int rc;
482
483 ata_print_version_once(&pdev->dev, DRV_VERSION);
484
485 rc = pcim_enable_device(pdev);
486 if (rc)
487 return rc;
488
489 printk(KERN_INFO "ATP867X: ATP867 ATA UDMA133 controller (rev %02X)",
490 pdev->device);
491
492 host = ata_host_alloc_pinfo(&pdev->dev, ppi, ATP867X_NUM_PORTS);
493 if (!host) {
494 dev_err(&pdev->dev, "failed to allocate ATA host\n");
495 rc = -ENOMEM;
496 goto err_out;
497 }
498
499 rc = atp867x_ata_pci_sff_init_host(host);
500 if (rc) {
501 dev_err(&pdev->dev, "failed to init host\n");
502 goto err_out;
503 }
504
505 pci_set_master(pdev);
506
507 rc = ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
508 IRQF_SHARED, &atp867x_sht);
509 if (rc)
510 dev_err(&pdev->dev, "failed to activate host\n");
511
512 err_out:
513 return rc;
514 }
515
516 #ifdef CONFIG_PM_SLEEP
517 static int atp867x_reinit_one(struct pci_dev *pdev)
518 {
519 struct ata_host *host = pci_get_drvdata(pdev);
520 int rc;
521
522 rc = ata_pci_device_do_resume(pdev);
523 if (rc)
524 return rc;
525
526 atp867x_fixup(host);
527
528 ata_host_resume(host);
529 return 0;
530 }
531 #endif
532
533 static struct pci_device_id atp867x_pci_tbl[] = {
534 { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A), 0 },
535 { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B), 0 },
536 { },
537 };
538
539 static struct pci_driver atp867x_driver = {
540 .name = DRV_NAME,
541 .id_table = atp867x_pci_tbl,
542 .probe = atp867x_init_one,
543 .remove = ata_pci_remove_one,
544 #ifdef CONFIG_PM_SLEEP
545 .suspend = ata_pci_device_suspend,
546 .resume = atp867x_reinit_one,
547 #endif
548 };
549
550 module_pci_driver(atp867x_driver);
551
552 MODULE_AUTHOR("John(Jung-Ik) Lee, Google Inc.");
553 MODULE_DESCRIPTION("low level driver for Artop/Acard 867x ATA controller");
554 MODULE_LICENSE("GPL");
555 MODULE_DEVICE_TABLE(pci, atp867x_pci_tbl);
556 MODULE_VERSION(DRV_VERSION);