drivers/usb/c67x00/c67x00-hcd.c

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
c67x00_hub_reset_host_port
c67x00_hub_status_data
c67x00_hub_control
c67x00_hcd_irq
c67x00_hcd_start
c67x00_hcd_stop
c67x00_hcd_get_frame
c67x00_hcd_probe
c67x00_hcd_remove
   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * c67x00-hcd.c: Cypress C67X00 USB Host Controller Driver
   4  *
   5  * Copyright (C) 2006-2008 Barco N.V.
   6  *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
   7  *    based on multiple host controller drivers inside the linux kernel.
   8  */
   9 
  10 #include <linux/device.h>
  11 #include <linux/platform_device.h>
  12 #include <linux/usb.h>
  13 
  14 #include "c67x00.h"
  15 #include "c67x00-hcd.h"
  16 
  17 /* --------------------------------------------------------------------------
  18  * Root Hub Support
  19  */
  20 
  21 static __u8 c67x00_hub_des[] = {
  22         0x09,                   /*  __u8  bLength; */
  23         USB_DT_HUB,             /*  __u8  bDescriptorType; Hub-descriptor */
  24         0x02,                   /*  __u8  bNbrPorts; */
  25         0x00,                   /* __u16  wHubCharacteristics; */
  26         0x00,                   /*   (per-port OC, no power switching) */
  27         0x32,                   /*  __u8  bPwrOn2pwrGood; 2ms */
  28         0x00,                   /*  __u8  bHubContrCurrent; 0 mA */
  29         0x00,                   /*  __u8  DeviceRemovable; ** 7 Ports max ** */
  30         0xff,                   /*  __u8  PortPwrCtrlMask; ** 7 ports max ** */
  31 };
  32 
  33 static void c67x00_hub_reset_host_port(struct c67x00_sie *sie, int port)
  34 {
  35         struct c67x00_hcd *c67x00 = sie->private_data;
  36         unsigned long flags;
  37 
  38         c67x00_ll_husb_reset(sie, port);
  39 
  40         spin_lock_irqsave(&c67x00->lock, flags);
  41         c67x00_ll_husb_reset_port(sie, port);
  42         spin_unlock_irqrestore(&c67x00->lock, flags);
  43 
  44         c67x00_ll_set_husb_eot(sie->dev, DEFAULT_EOT);
  45 }
  46 
  47 static int c67x00_hub_status_data(struct usb_hcd *hcd, char *buf)
  48 {
  49         struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
  50         struct c67x00_sie *sie = c67x00->sie;
  51         u16 status;
  52         int i;
  53 
  54         *buf = 0;
  55         status = c67x00_ll_usb_get_status(sie);
  56         for (i = 0; i < C67X00_PORTS; i++)
  57                 if (status & PORT_CONNECT_CHANGE(i))
  58                         *buf |= (1 << i);
  59 
  60         /* bit 0 denotes hub change, b1..n port change */
  61         *buf <<= 1;
  62 
  63         return !!*buf;
  64 }
  65 
  66 static int c67x00_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
  67                               u16 wIndex, char *buf, u16 wLength)
  68 {
  69         struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
  70         struct c67x00_sie *sie = c67x00->sie;
  71         u16 status, usb_status;
  72         int len = 0;
  73         unsigned int port = wIndex-1;
  74         u16 wPortChange, wPortStatus;
  75 
  76         switch (typeReq) {
  77 
  78         case GetHubStatus:
  79                 *(__le32 *) buf = cpu_to_le32(0);
  80                 len = 4;                /* hub power */
  81                 break;
  82 
  83         case GetPortStatus:
  84                 if (wIndex > C67X00_PORTS)
  85                         return -EPIPE;
  86 
  87                 status = c67x00_ll_usb_get_status(sie);
  88                 usb_status = c67x00_ll_get_usb_ctl(sie);
  89 
  90                 wPortChange = 0;
  91                 if (status & PORT_CONNECT_CHANGE(port))
  92                         wPortChange |= USB_PORT_STAT_C_CONNECTION;
  93 
  94                 wPortStatus = USB_PORT_STAT_POWER;
  95                 if (!(status & PORT_SE0_STATUS(port)))
  96                         wPortStatus |= USB_PORT_STAT_CONNECTION;
  97                 if (usb_status & LOW_SPEED_PORT(port)) {
  98                         wPortStatus |= USB_PORT_STAT_LOW_SPEED;
  99                         c67x00->low_speed_ports |= (1 << port);
 100                 } else
 101                         c67x00->low_speed_ports &= ~(1 << port);
 102 
 103                 if (usb_status & SOF_EOP_EN(port))
 104                         wPortStatus |= USB_PORT_STAT_ENABLE;
 105 
 106                 *(__le16 *) buf = cpu_to_le16(wPortStatus);
 107                 *(__le16 *) (buf + 2) = cpu_to_le16(wPortChange);
 108                 len = 4;
 109                 break;
 110 
 111         case SetHubFeature:     /* We don't implement these */
 112         case ClearHubFeature:
 113                 switch (wValue) {
 114                 case C_HUB_OVER_CURRENT:
 115                 case C_HUB_LOCAL_POWER:
 116                         len = 0;
 117                         break;
 118 
 119                 default:
 120                         return -EPIPE;
 121                 }
 122                 break;
 123 
 124         case SetPortFeature:
 125                 if (wIndex > C67X00_PORTS)
 126                         return -EPIPE;
 127 
 128                 switch (wValue) {
 129                 case USB_PORT_FEAT_SUSPEND:
 130                         dev_dbg(c67x00_hcd_dev(c67x00),
 131                                 "SetPortFeature %d (SUSPEND)\n", port);
 132                         len = 0;
 133                         break;
 134 
 135                 case USB_PORT_FEAT_RESET:
 136                         c67x00_hub_reset_host_port(sie, port);
 137                         len = 0;
 138                         break;
 139 
 140                 case USB_PORT_FEAT_POWER:
 141                         /* Power always enabled */
 142                         len = 0;
 143                         break;
 144 
 145                 default:
 146                         dev_dbg(c67x00_hcd_dev(c67x00),
 147                                 "%s: SetPortFeature %d (0x%04x) Error!\n",
 148                                 __func__, port, wValue);
 149                         return -EPIPE;
 150                 }
 151                 break;
 152 
 153         case ClearPortFeature:
 154                 if (wIndex > C67X00_PORTS)
 155                         return -EPIPE;
 156 
 157                 switch (wValue) {
 158                 case USB_PORT_FEAT_ENABLE:
 159                         /* Reset the port so that the c67x00 also notices the
 160                          * disconnect */
 161                         c67x00_hub_reset_host_port(sie, port);
 162                         len = 0;
 163                         break;
 164 
 165                 case USB_PORT_FEAT_C_ENABLE:
 166                         dev_dbg(c67x00_hcd_dev(c67x00),
 167                                 "ClearPortFeature (%d): C_ENABLE\n", port);
 168                         len = 0;
 169                         break;
 170 
 171                 case USB_PORT_FEAT_SUSPEND:
 172                         dev_dbg(c67x00_hcd_dev(c67x00),
 173                                 "ClearPortFeature (%d): SUSPEND\n", port);
 174                         len = 0;
 175                         break;
 176 
 177                 case USB_PORT_FEAT_C_SUSPEND:
 178                         dev_dbg(c67x00_hcd_dev(c67x00),
 179                                 "ClearPortFeature (%d): C_SUSPEND\n", port);
 180                         len = 0;
 181                         break;
 182 
 183                 case USB_PORT_FEAT_POWER:
 184                         dev_dbg(c67x00_hcd_dev(c67x00),
 185                                 "ClearPortFeature (%d): POWER\n", port);
 186                         return -EPIPE;
 187 
 188                 case USB_PORT_FEAT_C_CONNECTION:
 189                         c67x00_ll_usb_clear_status(sie,
 190                                                    PORT_CONNECT_CHANGE(port));
 191                         len = 0;
 192                         break;
 193 
 194                 case USB_PORT_FEAT_C_OVER_CURRENT:
 195                         dev_dbg(c67x00_hcd_dev(c67x00),
 196                                 "ClearPortFeature (%d): OVER_CURRENT\n", port);
 197                         len = 0;
 198                         break;
 199 
 200                 case USB_PORT_FEAT_C_RESET:
 201                         dev_dbg(c67x00_hcd_dev(c67x00),
 202                                 "ClearPortFeature (%d): C_RESET\n", port);
 203                         len = 0;
 204                         break;
 205 
 206                 default:
 207                         dev_dbg(c67x00_hcd_dev(c67x00),
 208                                 "%s: ClearPortFeature %d (0x%04x) Error!\n",
 209                                 __func__, port, wValue);
 210                         return -EPIPE;
 211                 }
 212                 break;
 213 
 214         case GetHubDescriptor:
 215                 len = min_t(unsigned int, sizeof(c67x00_hub_des), wLength);
 216                 memcpy(buf, c67x00_hub_des, len);
 217                 break;
 218 
 219         default:
 220                 dev_dbg(c67x00_hcd_dev(c67x00), "%s: unknown\n", __func__);
 221                 return -EPIPE;
 222         }
 223 
 224         return 0;
 225 }
 226 
 227 /* ---------------------------------------------------------------------
 228  * Main part of host controller driver
 229  */
 230 
 231 /**
 232  * c67x00_hcd_irq
 233  *
 234  * This function is called from the interrupt handler in c67x00-drv.c
 235  */
 236 static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg)
 237 {
 238         struct c67x00_hcd *c67x00 = sie->private_data;
 239         struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00);
 240 
 241         /* Handle sie message flags */
 242         if (msg) {
 243                 if (msg & HUSB_TDListDone)
 244                         c67x00_sched_kick(c67x00);
 245                 else
 246                         dev_warn(c67x00_hcd_dev(c67x00),
 247                                  "Unknown SIE msg flag(s): 0x%04x\n", msg);
 248         }
 249 
 250         if (unlikely(hcd->state == HC_STATE_HALT))
 251                 return;
 252 
 253         if (!HCD_HW_ACCESSIBLE(hcd))
 254                 return;
 255 
 256         /* Handle Start of frame events */
 257         if (int_status & SOFEOP_FLG(sie->sie_num)) {
 258                 c67x00_ll_usb_clear_status(sie, SOF_EOP_IRQ_FLG);
 259                 c67x00_sched_kick(c67x00);
 260         }
 261 }
 262 
 263 /**
 264  * c67x00_hcd_start: Host controller start hook
 265  */
 266 static int c67x00_hcd_start(struct usb_hcd *hcd)
 267 {
 268         hcd->uses_new_polling = 1;
 269         hcd->state = HC_STATE_RUNNING;
 270         set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 271 
 272         return 0;
 273 }
 274 
 275 /**
 276  * c67x00_hcd_stop: Host controller stop hook
 277  */
 278 static void c67x00_hcd_stop(struct usb_hcd *hcd)
 279 {
 280         /* Nothing to do */
 281 }
 282 
 283 static int c67x00_hcd_get_frame(struct usb_hcd *hcd)
 284 {
 285         struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
 286         u16 temp_val;
 287 
 288         dev_dbg(c67x00_hcd_dev(c67x00), "%s\n", __func__);
 289         temp_val = c67x00_ll_husb_get_frame(c67x00->sie);
 290         temp_val &= HOST_FRAME_MASK;
 291         return temp_val ? (temp_val - 1) : HOST_FRAME_MASK;
 292 }
 293 
 294 static const struct hc_driver c67x00_hc_driver = {
 295         .description    = "c67x00-hcd",
 296         .product_desc   = "Cypress C67X00 Host Controller",
 297         .hcd_priv_size  = sizeof(struct c67x00_hcd),
 298         .flags          = HCD_USB11 | HCD_MEMORY,
 299 
 300         /*
 301          * basic lifecycle operations
 302          */
 303         .start          = c67x00_hcd_start,
 304         .stop           = c67x00_hcd_stop,
 305 
 306         /*
 307          * managing i/o requests and associated device resources
 308          */
 309         .urb_enqueue    = c67x00_urb_enqueue,
 310         .urb_dequeue    = c67x00_urb_dequeue,
 311         .endpoint_disable = c67x00_endpoint_disable,
 312 
 313         /*
 314          * scheduling support
 315          */
 316         .get_frame_number = c67x00_hcd_get_frame,
 317 
 318         /*
 319          * root hub support
 320          */
 321         .hub_status_data = c67x00_hub_status_data,
 322         .hub_control    = c67x00_hub_control,
 323 };
 324 
 325 /* ---------------------------------------------------------------------
 326  * Setup/Teardown routines
 327  */
 328 
 329 int c67x00_hcd_probe(struct c67x00_sie *sie)
 330 {
 331         struct c67x00_hcd *c67x00;
 332         struct usb_hcd *hcd;
 333         unsigned long flags;
 334         int retval;
 335 
 336         if (usb_disabled())
 337                 return -ENODEV;
 338 
 339         hcd = usb_create_hcd(&c67x00_hc_driver, sie_dev(sie), "c67x00_sie");
 340         if (!hcd) {
 341                 retval = -ENOMEM;
 342                 goto err0;
 343         }
 344         c67x00 = hcd_to_c67x00_hcd(hcd);
 345 
 346         spin_lock_init(&c67x00->lock);
 347         c67x00->sie = sie;
 348 
 349         INIT_LIST_HEAD(&c67x00->list[PIPE_ISOCHRONOUS]);
 350         INIT_LIST_HEAD(&c67x00->list[PIPE_INTERRUPT]);
 351         INIT_LIST_HEAD(&c67x00->list[PIPE_CONTROL]);
 352         INIT_LIST_HEAD(&c67x00->list[PIPE_BULK]);
 353         c67x00->urb_count = 0;
 354         INIT_LIST_HEAD(&c67x00->td_list);
 355         c67x00->td_base_addr = CY_HCD_BUF_ADDR + SIE_TD_OFFSET(sie->sie_num);
 356         c67x00->buf_base_addr = CY_HCD_BUF_ADDR + SIE_BUF_OFFSET(sie->sie_num);
 357         c67x00->max_frame_bw = MAX_FRAME_BW_STD;
 358 
 359         c67x00_ll_husb_init_host_port(sie);
 360 
 361         init_completion(&c67x00->endpoint_disable);
 362         retval = c67x00_sched_start_scheduler(c67x00);
 363         if (retval)
 364                 goto err1;
 365 
 366         retval = usb_add_hcd(hcd, 0, 0);
 367         if (retval) {
 368                 dev_dbg(sie_dev(sie), "%s: usb_add_hcd returned %d\n",
 369                         __func__, retval);
 370                 goto err2;
 371         }
 372 
 373         device_wakeup_enable(hcd->self.controller);
 374 
 375         spin_lock_irqsave(&sie->lock, flags);
 376         sie->private_data = c67x00;
 377         sie->irq = c67x00_hcd_irq;
 378         spin_unlock_irqrestore(&sie->lock, flags);
 379 
 380         return retval;
 381 
 382  err2:
 383         c67x00_sched_stop_scheduler(c67x00);
 384  err1:
 385         usb_put_hcd(hcd);
 386  err0:
 387         return retval;
 388 }
 389 
 390 /* may be called with controller, bus, and devices active */
 391 void c67x00_hcd_remove(struct c67x00_sie *sie)
 392 {
 393         struct c67x00_hcd *c67x00 = sie->private_data;
 394         struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00);
 395 
 396         c67x00_sched_stop_scheduler(c67x00);
 397         usb_remove_hcd(hcd);
 398         usb_put_hcd(hcd);
 399 }
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/usb/c67x00/c67x00-hcd.c

DEFINITIONS
