This source file includes following definitions.
- clps711x_clk_init_dt
1
2
3
4
5
6
7
8 #include <linux/clk-provider.h>
9 #include <linux/clkdev.h>
10 #include <linux/io.h>
11 #include <linux/ioport.h>
12 #include <linux/of_address.h>
13 #include <linux/slab.h>
14 #include <linux/mfd/syscon/clps711x.h>
15
16 #include <dt-bindings/clock/clps711x-clock.h>
17
18 #define CLPS711X_SYSCON1 (0x0100)
19 #define CLPS711X_SYSCON2 (0x1100)
20 #define CLPS711X_SYSFLG2 (CLPS711X_SYSCON2 + SYSFLG_OFFSET)
21 #define CLPS711X_PLLR (0xa5a8)
22
23 #define CLPS711X_EXT_FREQ (13000000)
24 #define CLPS711X_OSC_FREQ (3686400)
25
26 static const struct clk_div_table spi_div_table[] = {
27 { .val = 0, .div = 32, },
28 { .val = 1, .div = 8, },
29 { .val = 2, .div = 2, },
30 { .val = 3, .div = 1, },
31 };
32
33 static const struct clk_div_table timer_div_table[] = {
34 { .val = 0, .div = 256, },
35 { .val = 1, .div = 1, },
36 };
37
38 struct clps711x_clk {
39 spinlock_t lock;
40 struct clk_hw_onecell_data clk_data;
41 };
42
43 static void __init clps711x_clk_init_dt(struct device_node *np)
44 {
45 u32 tmp, f_cpu, f_pll, f_bus, f_tim, f_pwm, f_spi, fref = 0;
46 struct clps711x_clk *clps711x_clk;
47 void __iomem *base;
48
49 WARN_ON(of_property_read_u32(np, "startup-frequency", &fref));
50
51 base = of_iomap(np, 0);
52 BUG_ON(!base);
53
54 clps711x_clk = kzalloc(struct_size(clps711x_clk, clk_data.hws,
55 CLPS711X_CLK_MAX),
56 GFP_KERNEL);
57 BUG_ON(!clps711x_clk);
58
59 spin_lock_init(&clps711x_clk->lock);
60
61
62 tmp = readl(base + CLPS711X_PLLR) >> 24;
63 if (((tmp >= 10) && (tmp <= 50)) || !fref)
64 f_pll = DIV_ROUND_UP(CLPS711X_OSC_FREQ * tmp, 2);
65 else
66 f_pll = fref;
67
68 tmp = readl(base + CLPS711X_SYSFLG2);
69 if (tmp & SYSFLG2_CKMODE) {
70 f_cpu = CLPS711X_EXT_FREQ;
71 f_bus = CLPS711X_EXT_FREQ;
72 f_spi = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 96);
73 f_pll = 0;
74 f_pwm = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 128);
75 } else {
76 f_cpu = f_pll;
77 if (f_cpu > 36864000)
78 f_bus = DIV_ROUND_UP(f_cpu, 2);
79 else
80 f_bus = 36864000 / 2;
81 f_spi = DIV_ROUND_CLOSEST(f_cpu, 576);
82 f_pwm = DIV_ROUND_CLOSEST(f_cpu, 768);
83 }
84
85 if (tmp & SYSFLG2_CKMODE) {
86 if (readl(base + CLPS711X_SYSCON2) & SYSCON2_OSTB)
87 f_tim = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 26);
88 else
89 f_tim = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 24);
90 } else
91 f_tim = DIV_ROUND_CLOSEST(f_cpu, 144);
92
93 tmp = readl(base + CLPS711X_SYSCON1);
94
95
96
97
98 tmp &= ~(SYSCON1_TC1M | SYSCON1_TC1S);
99
100
101
102
103 tmp |= SYSCON1_TC2M | SYSCON1_TC2S;
104 writel(tmp, base + CLPS711X_SYSCON1);
105
106 clps711x_clk->clk_data.hws[CLPS711X_CLK_DUMMY] =
107 clk_hw_register_fixed_rate(NULL, "dummy", NULL, 0, 0);
108 clps711x_clk->clk_data.hws[CLPS711X_CLK_CPU] =
109 clk_hw_register_fixed_rate(NULL, "cpu", NULL, 0, f_cpu);
110 clps711x_clk->clk_data.hws[CLPS711X_CLK_BUS] =
111 clk_hw_register_fixed_rate(NULL, "bus", NULL, 0, f_bus);
112 clps711x_clk->clk_data.hws[CLPS711X_CLK_PLL] =
113 clk_hw_register_fixed_rate(NULL, "pll", NULL, 0, f_pll);
114 clps711x_clk->clk_data.hws[CLPS711X_CLK_TIMERREF] =
115 clk_hw_register_fixed_rate(NULL, "timer_ref", NULL, 0, f_tim);
116 clps711x_clk->clk_data.hws[CLPS711X_CLK_TIMER1] =
117 clk_hw_register_divider_table(NULL, "timer1", "timer_ref", 0,
118 base + CLPS711X_SYSCON1, 5, 1, 0,
119 timer_div_table, &clps711x_clk->lock);
120 clps711x_clk->clk_data.hws[CLPS711X_CLK_TIMER2] =
121 clk_hw_register_divider_table(NULL, "timer2", "timer_ref", 0,
122 base + CLPS711X_SYSCON1, 7, 1, 0,
123 timer_div_table, &clps711x_clk->lock);
124 clps711x_clk->clk_data.hws[CLPS711X_CLK_PWM] =
125 clk_hw_register_fixed_rate(NULL, "pwm", NULL, 0, f_pwm);
126 clps711x_clk->clk_data.hws[CLPS711X_CLK_SPIREF] =
127 clk_hw_register_fixed_rate(NULL, "spi_ref", NULL, 0, f_spi);
128 clps711x_clk->clk_data.hws[CLPS711X_CLK_SPI] =
129 clk_hw_register_divider_table(NULL, "spi", "spi_ref", 0,
130 base + CLPS711X_SYSCON1, 16, 2, 0,
131 spi_div_table, &clps711x_clk->lock);
132 clps711x_clk->clk_data.hws[CLPS711X_CLK_UART] =
133 clk_hw_register_fixed_factor(NULL, "uart", "bus", 0, 1, 10);
134 clps711x_clk->clk_data.hws[CLPS711X_CLK_TICK] =
135 clk_hw_register_fixed_rate(NULL, "tick", NULL, 0, 64);
136 for (tmp = 0; tmp < CLPS711X_CLK_MAX; tmp++)
137 if (IS_ERR(clps711x_clk->clk_data.hws[tmp]))
138 pr_err("clk %i: register failed with %ld\n",
139 tmp, PTR_ERR(clps711x_clk->clk_data.hws[tmp]));
140
141 clps711x_clk->clk_data.num = CLPS711X_CLK_MAX;
142 of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
143 &clps711x_clk->clk_data);
144 }
145 CLK_OF_DECLARE(clps711x, "cirrus,ep7209-clk", clps711x_clk_init_dt);