drivers/clk/samsung/clk-s3c2412.c

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
s3c2412_restart
s3c2412_common_clk_register_fixed_ext
s3c2412_common_clk_init
s3c2412_clk_init
   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
   4  *
   5  * Common Clock Framework support for S3C2412 and S3C2413.
   6  */
   7 
   8 #include <linux/clk-provider.h>
   9 #include <linux/io.h>
  10 #include <linux/of.h>
  11 #include <linux/of_address.h>
  12 #include <linux/reboot.h>
  13 
  14 #include <dt-bindings/clock/s3c2412.h>
  15 
  16 #include "clk.h"
  17 #include "clk-pll.h"
  18 
  19 #define LOCKTIME        0x00
  20 #define MPLLCON         0x04
  21 #define UPLLCON         0x08
  22 #define CLKCON          0x0c
  23 #define CLKDIVN         0x14
  24 #define CLKSRC          0x1c
  25 #define SWRST           0x30
  26 
  27 static void __iomem *reg_base;
  28 
  29 /*
  30  * list of controller registers to be saved and restored during a
  31  * suspend/resume cycle.
  32  */
  33 static unsigned long s3c2412_clk_regs[] __initdata = {
  34         LOCKTIME,
  35         MPLLCON,
  36         UPLLCON,
  37         CLKCON,
  38         CLKDIVN,
  39         CLKSRC,
  40 };
  41 
  42 static struct clk_div_table divxti_d[] = {
  43         { .val = 0, .div = 1 },
  44         { .val = 1, .div = 2 },
  45         { .val = 2, .div = 4 },
  46         { .val = 3, .div = 6 },
  47         { .val = 4, .div = 8 },
  48         { .val = 5, .div = 10 },
  49         { .val = 6, .div = 12 },
  50         { .val = 7, .div = 14 },
  51         { /* sentinel */ },
  52 };
  53 
  54 static struct samsung_div_clock s3c2412_dividers[] __initdata = {
  55         DIV_T(0, "div_xti", "xti", CLKSRC, 0, 3, divxti_d),
  56         DIV(0, "div_cam", "mux_cam", CLKDIVN, 16, 4),
  57         DIV(0, "div_i2s", "mux_i2s", CLKDIVN, 12, 4),
  58         DIV(0, "div_uart", "mux_uart", CLKDIVN, 8, 4),
  59         DIV(0, "div_usb", "mux_usb", CLKDIVN, 6, 1),
  60         DIV(0, "div_hclk_half", "hclk", CLKDIVN, 5, 1),
  61         DIV(ARMDIV, "armdiv", "msysclk", CLKDIVN, 3, 1),
  62         DIV(PCLK, "pclk", "hclk", CLKDIVN, 2, 1),
  63         DIV(HCLK, "hclk", "armdiv", CLKDIVN, 0, 2),
  64 };
  65 
  66 static struct samsung_fixed_factor_clock s3c2412_ffactor[] __initdata = {
  67         FFACTOR(0, "ff_hclk", "hclk", 2, 1, CLK_SET_RATE_PARENT),
  68 };
  69 
  70 /*
  71  * The first two use the OM[4] setting, which is not readable from
  72  * software, so assume it is set to xti.
  73  */
  74 PNAME(erefclk_p) = { "xti", "xti", "xti", "ext" };
  75 PNAME(urefclk_p) = { "xti", "xti", "xti", "ext" };
  76 
  77 PNAME(camclk_p) = { "usysclk", "hclk" };
  78 PNAME(usbclk_p) = { "usysclk", "hclk" };
  79 PNAME(i2sclk_p) = { "erefclk", "mpll" };
  80 PNAME(uartclk_p) = { "erefclk", "mpll" };
  81 PNAME(usysclk_p) = { "urefclk", "upll" };
  82 PNAME(msysclk_p) = { "mdivclk", "mpll" };
  83 PNAME(mdivclk_p) = { "xti", "div_xti" };
  84 PNAME(armclk_p) = { "armdiv", "hclk" };
  85 
  86 static struct samsung_mux_clock s3c2412_muxes[] __initdata = {
  87         MUX(0, "erefclk", erefclk_p, CLKSRC, 14, 2),
  88         MUX(0, "urefclk", urefclk_p, CLKSRC, 12, 2),
  89         MUX(0, "mux_cam", camclk_p, CLKSRC, 11, 1),
  90         MUX(0, "mux_usb", usbclk_p, CLKSRC, 10, 1),
  91         MUX(0, "mux_i2s", i2sclk_p, CLKSRC, 9, 1),
  92         MUX(0, "mux_uart", uartclk_p, CLKSRC, 8, 1),
  93         MUX(USYSCLK, "usysclk", usysclk_p, CLKSRC, 5, 1),
  94         MUX(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1),
  95         MUX(MDIVCLK, "mdivclk", mdivclk_p, CLKSRC, 3, 1),
  96         MUX(ARMCLK, "armclk", armclk_p, CLKDIVN, 4, 1),
  97 };
  98 
  99 static struct samsung_pll_clock s3c2412_plls[] __initdata = {
 100         PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti", LOCKTIME, MPLLCON, NULL),
 101         PLL(pll_s3c2410_upll, UPLL, "upll", "urefclk", LOCKTIME, UPLLCON, NULL),
 102 };
 103 
 104 static struct samsung_gate_clock s3c2412_gates[] __initdata = {
 105         GATE(PCLK_WDT, "wdt", "pclk", CLKCON, 28, 0, 0),
 106         GATE(PCLK_SPI, "spi", "pclk", CLKCON, 27, 0, 0),
 107         GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 26, 0, 0),
 108         GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 25, 0, 0),
 109         GATE(PCLK_ADC, "adc", "pclk", CLKCON, 24, 0, 0),
 110         GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 23, 0, 0),
 111         GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 22, CLK_IGNORE_UNUSED, 0),
 112         GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 21, 0, 0),
 113         GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 20, 0, 0),
 114         GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 19, 0, 0),
 115         GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 18, 0, 0),
 116         GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 17, 0, 0),
 117         GATE(PCLK_USBD, "usb-device", "pclk", CLKCON, 16, 0, 0),
 118         GATE(SCLK_CAM, "sclk_cam", "div_cam", CLKCON, 15, 0, 0),
 119         GATE(SCLK_UART, "sclk_uart", "div_uart", CLKCON, 14, 0, 0),
 120         GATE(SCLK_I2S, "sclk_i2s", "div_i2s", CLKCON, 13, 0, 0),
 121         GATE(SCLK_USBH, "sclk_usbh", "div_usb", CLKCON, 12, 0, 0),
 122         GATE(SCLK_USBD, "sclk_usbd", "div_usb", CLKCON, 11, 0, 0),
 123         GATE(HCLK_HALF, "hclk_half", "div_hclk_half", CLKCON, 10, CLK_IGNORE_UNUSED, 0),
 124         GATE(HCLK_X2, "hclkx2", "ff_hclk", CLKCON, 9, CLK_IGNORE_UNUSED, 0),
 125         GATE(HCLK_SDRAM, "sdram", "hclk", CLKCON, 8, CLK_IGNORE_UNUSED, 0),
 126         GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0),
 127         GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0),
 128         GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0),
 129         GATE(HCLK_DMA3, "dma3", "hclk", CLKCON, 3, CLK_IGNORE_UNUSED, 0),
 130         GATE(HCLK_DMA2, "dma2", "hclk", CLKCON, 2, CLK_IGNORE_UNUSED, 0),
 131         GATE(HCLK_DMA1, "dma1", "hclk", CLKCON, 1, CLK_IGNORE_UNUSED, 0),
 132         GATE(HCLK_DMA0, "dma0", "hclk", CLKCON, 0, CLK_IGNORE_UNUSED, 0),
 133 };
 134 
 135 static struct samsung_clock_alias s3c2412_aliases[] __initdata = {
 136         ALIAS(PCLK_UART0, "s3c2412-uart.0", "uart"),
 137         ALIAS(PCLK_UART1, "s3c2412-uart.1", "uart"),
 138         ALIAS(PCLK_UART2, "s3c2412-uart.2", "uart"),
 139         ALIAS(PCLK_UART0, "s3c2412-uart.0", "clk_uart_baud2"),
 140         ALIAS(PCLK_UART1, "s3c2412-uart.1", "clk_uart_baud2"),
 141         ALIAS(PCLK_UART2, "s3c2412-uart.2", "clk_uart_baud2"),
 142         ALIAS(SCLK_UART, NULL, "clk_uart_baud3"),
 143         ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"),
 144         ALIAS(PCLK_ADC, NULL, "adc"),
 145         ALIAS(PCLK_RTC, NULL, "rtc"),
 146         ALIAS(PCLK_PWM, NULL, "timers"),
 147         ALIAS(HCLK_LCD, NULL, "lcd"),
 148         ALIAS(PCLK_USBD, NULL, "usb-device"),
 149         ALIAS(SCLK_USBD, NULL, "usb-bus-gadget"),
 150         ALIAS(HCLK_USBH, NULL, "usb-host"),
 151         ALIAS(SCLK_USBH, NULL, "usb-bus-host"),
 152         ALIAS(ARMCLK, NULL, "armclk"),
 153         ALIAS(HCLK, NULL, "hclk"),
 154         ALIAS(MPLL, NULL, "mpll"),
 155         ALIAS(MSYSCLK, NULL, "fclk"),
 156 };
 157 
 158 static int s3c2412_restart(struct notifier_block *this,
 159                            unsigned long mode, void *cmd)
 160 {
 161         /* errata "Watch-dog/Software Reset Problem" specifies that
 162          * this reset must be done with the SYSCLK sourced from
 163          * EXTCLK instead of FOUT to avoid a glitch in the reset
 164          * mechanism.
 165          *
 166          * See the watchdog section of the S3C2412 manual for more
 167          * information on this fix.
 168          */
 169 
 170         __raw_writel(0x00, reg_base + CLKSRC);
 171         __raw_writel(0x533C2412, reg_base + SWRST);
 172         return NOTIFY_DONE;
 173 }
 174 
 175 static struct notifier_block s3c2412_restart_handler = {
 176         .notifier_call = s3c2412_restart,
 177         .priority = 129,
 178 };
 179 
 180 /*
 181  * fixed rate clocks generated outside the soc
 182  * Only necessary until the devicetree-move is complete
 183  */
 184 #define XTI     1
 185 static struct samsung_fixed_rate_clock s3c2412_common_frate_clks[] __initdata = {
 186         FRATE(XTI, "xti", NULL, 0, 0),
 187         FRATE(0, "ext", NULL, 0, 0),
 188 };
 189 
 190 static void __init s3c2412_common_clk_register_fixed_ext(
 191                 struct samsung_clk_provider *ctx,
 192                 unsigned long xti_f, unsigned long ext_f)
 193 {
 194         /* xtal alias is necessary for the current cpufreq driver */
 195         struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal");
 196 
 197         s3c2412_common_frate_clks[0].fixed_rate = xti_f;
 198         s3c2412_common_frate_clks[1].fixed_rate = ext_f;
 199         samsung_clk_register_fixed_rate(ctx, s3c2412_common_frate_clks,
 200                                 ARRAY_SIZE(s3c2412_common_frate_clks));
 201 
 202         samsung_clk_register_alias(ctx, &xti_alias, 1);
 203 }
 204 
 205 void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
 206                                     unsigned long ext_f, void __iomem *base)
 207 {
 208         struct samsung_clk_provider *ctx;
 209         int ret;
 210         reg_base = base;
 211 
 212         if (np) {
 213                 reg_base = of_iomap(np, 0);
 214                 if (!reg_base)
 215                         panic("%s: failed to map registers\n", __func__);
 216         }
 217 
 218         ctx = samsung_clk_init(np, reg_base, NR_CLKS);
 219 
 220         /* Register external clocks only in non-dt cases */
 221         if (!np)
 222                 s3c2412_common_clk_register_fixed_ext(ctx, xti_f, ext_f);
 223 
 224         /* Register PLLs. */
 225         samsung_clk_register_pll(ctx, s3c2412_plls, ARRAY_SIZE(s3c2412_plls),
 226                                  reg_base);
 227 
 228         /* Register common internal clocks. */
 229         samsung_clk_register_mux(ctx, s3c2412_muxes, ARRAY_SIZE(s3c2412_muxes));
 230         samsung_clk_register_div(ctx, s3c2412_dividers,
 231                                           ARRAY_SIZE(s3c2412_dividers));
 232         samsung_clk_register_gate(ctx, s3c2412_gates,
 233                                         ARRAY_SIZE(s3c2412_gates));
 234         samsung_clk_register_fixed_factor(ctx, s3c2412_ffactor,
 235                                           ARRAY_SIZE(s3c2412_ffactor));
 236         samsung_clk_register_alias(ctx, s3c2412_aliases,
 237                                    ARRAY_SIZE(s3c2412_aliases));
 238 
 239         samsung_clk_sleep_init(reg_base, s3c2412_clk_regs,
 240                                ARRAY_SIZE(s3c2412_clk_regs));
 241 
 242         samsung_clk_of_add_provider(np, ctx);
 243 
 244         ret = register_restart_handler(&s3c2412_restart_handler);
 245         if (ret)
 246                 pr_warn("cannot register restart handler, %d\n", ret);
 247 }
 248 
 249 static void __init s3c2412_clk_init(struct device_node *np)
 250 {
 251         s3c2412_common_clk_init(np, 0, 0, NULL);
 252 }
 253 CLK_OF_DECLARE(s3c2412_clk, "samsung,s3c2412-clock", s3c2412_clk_init);
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/clk/samsung/clk-s3c2412.c

DEFINITIONS
