This source file includes following definitions.
- men_lookup_uartclk
- get_num_ports
- serial_8250_men_mcb_probe
- serial_8250_men_mcb_remove
1
2 #include <linux/device.h>
3 #include <linux/kernel.h>
4 #include <linux/module.h>
5 #include <linux/io.h>
6 #include <linux/mcb.h>
7 #include <linux/serial.h>
8 #include <linux/serial_core.h>
9 #include <linux/serial_8250.h>
10 #include <uapi/linux/serial_core.h>
11
12 #define MEN_UART_ID_Z025 0x19
13 #define MEN_UART_ID_Z057 0x39
14 #define MEN_UART_ID_Z125 0x7d
15
16 #define MEN_UART_MEM_SIZE 0x10
17
18 struct serial_8250_men_mcb_data {
19 struct uart_8250_port uart;
20 int line;
21 };
22
23
24
25
26
27
28
29 static u32 men_lookup_uartclk(struct mcb_device *mdev)
30 {
31
32 u32 clkval = 1041666;
33
34 dev_info(&mdev->dev, "%s on board %s\n",
35 dev_name(&mdev->dev),
36 mdev->bus->name);
37 if (strncmp(mdev->bus->name, "F075", 4) == 0)
38 clkval = 1041666;
39 else if (strncmp(mdev->bus->name, "F216", 4) == 0)
40 clkval = 1843200;
41 else if (strncmp(mdev->bus->name, "G215", 4) == 0)
42 clkval = 1843200;
43 else if (strncmp(mdev->bus->name, "F210", 4) == 0)
44 clkval = 115200;
45 else
46 dev_info(&mdev->dev,
47 "board not detected, using default uartclk\n");
48
49 clkval = clkval << 4;
50
51 return clkval;
52 }
53
54 static unsigned int get_num_ports(struct mcb_device *mdev,
55 void __iomem *membase)
56 {
57 switch (mdev->id) {
58 case MEN_UART_ID_Z125:
59 return 1U;
60 case MEN_UART_ID_Z025:
61 return readb(membase) >> 4;
62 case MEN_UART_ID_Z057:
63 return 4U;
64 default:
65 dev_err(&mdev->dev, "no supported device!\n");
66 return -ENODEV;
67 }
68 }
69
70 static int serial_8250_men_mcb_probe(struct mcb_device *mdev,
71 const struct mcb_device_id *id)
72 {
73 struct serial_8250_men_mcb_data *data;
74 struct resource *mem;
75 int num_ports;
76 int i;
77 void __iomem *membase;
78
79 mem = mcb_get_resource(mdev, IORESOURCE_MEM);
80 if (mem == NULL)
81 return -ENXIO;
82 membase = devm_ioremap_resource(&mdev->dev, mem);
83 if (IS_ERR(membase))
84 return PTR_ERR_OR_ZERO(membase);
85
86 num_ports = get_num_ports(mdev, membase);
87
88 dev_dbg(&mdev->dev, "found a 16z%03u with %u ports\n",
89 mdev->id, num_ports);
90
91 if (num_ports <= 0 || num_ports > 4) {
92 dev_err(&mdev->dev, "unexpected number of ports: %u\n",
93 num_ports);
94 return -ENODEV;
95 }
96
97 data = devm_kcalloc(&mdev->dev, num_ports,
98 sizeof(struct serial_8250_men_mcb_data),
99 GFP_KERNEL);
100 if (!data)
101 return -ENOMEM;
102
103 mcb_set_drvdata(mdev, data);
104
105 for (i = 0; i < num_ports; i++) {
106 data[i].uart.port.dev = mdev->dma_dev;
107 spin_lock_init(&data[i].uart.port.lock);
108
109 data[i].uart.port.type = PORT_16550;
110 data[i].uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ
111 | UPF_FIXED_TYPE;
112 data[i].uart.port.iotype = UPIO_MEM;
113 data[i].uart.port.uartclk = men_lookup_uartclk(mdev);
114 data[i].uart.port.regshift = 0;
115 data[i].uart.port.irq = mcb_get_irq(mdev);
116 data[i].uart.port.membase = membase;
117 data[i].uart.port.fifosize = 60;
118 data[i].uart.port.mapbase = (unsigned long) mem->start
119 + i * MEN_UART_MEM_SIZE;
120 data[i].uart.port.iobase = data[i].uart.port.mapbase;
121
122
123 data[i].line = serial8250_register_8250_port(&data[i].uart);
124 if (data[i].line < 0) {
125 dev_err(&mdev->dev, "unable to register UART port\n");
126 return data[i].line;
127 }
128 dev_info(&mdev->dev, "found MCB UART: ttyS%d\n", data[i].line);
129 }
130
131 return 0;
132 }
133
134 static void serial_8250_men_mcb_remove(struct mcb_device *mdev)
135 {
136 int num_ports, i;
137 struct serial_8250_men_mcb_data *data = mcb_get_drvdata(mdev);
138
139 if (!data)
140 return;
141
142 num_ports = get_num_ports(mdev, data[0].uart.port.membase);
143 if (num_ports < 0 || num_ports > 4) {
144 dev_err(&mdev->dev, "error retrieving number of ports!\n");
145 return;
146 }
147
148 for (i = 0; i < num_ports; i++)
149 serial8250_unregister_port(data[i].line);
150 }
151
152 static const struct mcb_device_id serial_8250_men_mcb_ids[] = {
153 { .device = MEN_UART_ID_Z025 },
154 { .device = MEN_UART_ID_Z057 },
155 { .device = MEN_UART_ID_Z125 },
156 { }
157 };
158 MODULE_DEVICE_TABLE(mcb, serial_8250_men_mcb_ids);
159
160 static struct mcb_driver mcb_driver = {
161 .driver = {
162 .name = "8250_men_mcb",
163 .owner = THIS_MODULE,
164 },
165 .probe = serial_8250_men_mcb_probe,
166 .remove = serial_8250_men_mcb_remove,
167 .id_table = serial_8250_men_mcb_ids,
168 };
169 module_mcb_driver(mcb_driver);
170
171 MODULE_LICENSE("GPL v2");
172 MODULE_DESCRIPTION("MEN 8250 UART driver");
173 MODULE_AUTHOR("Michael Moese <michael.moese@men.de");
174 MODULE_ALIAS("mcb:16z125");
175 MODULE_ALIAS("mcb:16z025");
176 MODULE_ALIAS("mcb:16z057");