root/drivers/pci/ecam.c

DEFINITIONS

1. pci_ecam_create
2. pci_ecam_free
3. pci_ecam_map_bus

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright 2016 Broadcom
   4  */
   5 
   6 #include <linux/device.h>
   7 #include <linux/io.h>
   8 #include <linux/kernel.h>
   9 #include <linux/module.h>
  10 #include <linux/pci.h>
  11 #include <linux/pci-ecam.h>
  12 #include <linux/slab.h>
  13 
  14 /*
  15  * On 64-bit systems, we do a single ioremap for the whole config space
  16  * since we have enough virtual address range available.  On 32-bit, we
  17  * ioremap the config space for each bus individually.
  18  */
  19 static const bool per_bus_mapping = !IS_ENABLED(CONFIG_64BIT);
  20 
  21 /*
  22  * Create a PCI config space window
  23  *  - reserve mem region
  24  *  - alloc struct pci_config_window with space for all mappings
  25  *  - ioremap the config space
  26  */
  27 struct pci_config_window *pci_ecam_create(struct device *dev,
  28                 struct resource *cfgres, struct resource *busr,
  29                 struct pci_ecam_ops *ops)
  30 {
  31         struct pci_config_window *cfg;
  32         unsigned int bus_range, bus_range_max, bsz;
  33         struct resource *conflict;
  34         int i, err;
  35 
  36         if (busr->start > busr->end)
  37                 return ERR_PTR(-EINVAL);
  38 
  39         cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
  40         if (!cfg)
  41                 return ERR_PTR(-ENOMEM);
  42 
  43         cfg->parent = dev;
  44         cfg->ops = ops;
  45         cfg->busr.start = busr->start;
  46         cfg->busr.end = busr->end;
  47         cfg->busr.flags = IORESOURCE_BUS;
  48         bus_range = resource_size(&cfg->busr);
  49         bus_range_max = resource_size(cfgres) >> ops->bus_shift;
  50         if (bus_range > bus_range_max) {
  51                 bus_range = bus_range_max;
  52                 cfg->busr.end = busr->start + bus_range - 1;
  53                 dev_warn(dev, "ECAM area %pR can only accommodate %pR (reduced from %pR desired)\n",
  54                          cfgres, &cfg->busr, busr);
  55         }
  56         bsz = 1 << ops->bus_shift;
  57 
  58         cfg->res.start = cfgres->start;
  59         cfg->res.end = cfgres->end;
  60         cfg->res.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
  61         cfg->res.name = "PCI ECAM";
  62 
  63         conflict = request_resource_conflict(&iomem_resource, &cfg->res);
  64         if (conflict) {
  65                 err = -EBUSY;
  66                 dev_err(dev, "can't claim ECAM area %pR: address conflict with %s %pR\n",
  67                         &cfg->res, conflict->name, conflict);
  68                 goto err_exit;
  69         }
  70 
  71         if (per_bus_mapping) {
  72                 cfg->winp = kcalloc(bus_range, sizeof(*cfg->winp), GFP_KERNEL);
  73                 if (!cfg->winp)
  74                         goto err_exit_malloc;
  75                 for (i = 0; i < bus_range; i++) {
  76                         cfg->winp[i] =
  77                                 pci_remap_cfgspace(cfgres->start + i * bsz,
  78                                                    bsz);
  79                         if (!cfg->winp[i])
  80                                 goto err_exit_iomap;
  81                 }
  82         } else {
  83                 cfg->win = pci_remap_cfgspace(cfgres->start, bus_range * bsz);
  84                 if (!cfg->win)
  85                         goto err_exit_iomap;
  86         }
  87 
  88         if (ops->init) {
  89                 err = ops->init(cfg);
  90                 if (err)
  91                         goto err_exit;
  92         }
  93         dev_info(dev, "ECAM at %pR for %pR\n", &cfg->res, &cfg->busr);
  94         return cfg;
  95 
  96 err_exit_iomap:
  97         dev_err(dev, "ECAM ioremap failed\n");
  98 err_exit_malloc:
  99         err = -ENOMEM;
 100 err_exit:
 101         pci_ecam_free(cfg);
 102         return ERR_PTR(err);
 103 }
 104 
 105 void pci_ecam_free(struct pci_config_window *cfg)
 106 {
 107         int i;
 108 
 109         if (per_bus_mapping) {
 110                 if (cfg->winp) {
 111                         for (i = 0; i < resource_size(&cfg->busr); i++)
 112                                 if (cfg->winp[i])
 113                                         iounmap(cfg->winp[i]);
 114                         kfree(cfg->winp);
 115                 }
 116         } else {
 117                 if (cfg->win)
 118                         iounmap(cfg->win);
 119         }
 120         if (cfg->res.parent)
 121                 release_resource(&cfg->res);
 122         kfree(cfg);
 123 }
 124 
 125 /*
 126  * Function to implement the pci_ops ->map_bus method
 127  */
 128 void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn,
 129                                int where)
 130 {
 131         struct pci_config_window *cfg = bus->sysdata;
 132         unsigned int devfn_shift = cfg->ops->bus_shift - 8;
 133         unsigned int busn = bus->number;
 134         void __iomem *base;
 135 
 136         if (busn < cfg->busr.start || busn > cfg->busr.end)
 137                 return NULL;
 138 
 139         busn -= cfg->busr.start;
 140         if (per_bus_mapping)
 141                 base = cfg->winp[busn];
 142         else
 143                 base = cfg->win + (busn << cfg->ops->bus_shift);
 144         return base + (devfn << devfn_shift) + where;
 145 }
 146 
 147 /* ECAM ops */
 148 struct pci_ecam_ops pci_generic_ecam_ops = {
 149         .bus_shift      = 20,
 150         .pci_ops        = {
 151                 .map_bus        = pci_ecam_map_bus,
 152                 .read           = pci_generic_config_read,
 153                 .write          = pci_generic_config_write,
 154         }
 155 };
 156 
 157 #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
 158 /* ECAM ops for 32-bit access only (non-compliant) */
 159 struct pci_ecam_ops pci_32b_ops = {
 160         .bus_shift      = 20,
 161         .pci_ops        = {
 162                 .map_bus        = pci_ecam_map_bus,
 163                 .read           = pci_generic_config_read32,
 164                 .write          = pci_generic_config_write32,
 165         }
 166 };
 167 #endif