arch/ia64/kernel/acpi.c

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
acpi_request_vector
__acpi_map_table
__acpi_unmap_table
acpi_parse_lapic_addr_ovr
acpi_parse_lsapic
acpi_parse_lapic_nmi
acpi_parse_iosapic
acpi_parse_plat_int_src
can_cpei_retarget
is_cpu_cpei_target
set_cpei_target_cpu
get_cpei_target_cpu
acpi_parse_int_src_ovr
acpi_parse_nmi_src
acpi_madt_oem_check
acpi_parse_madt
get_processor_proximity_domain
get_memory_proximity_domain
acpi_numa_slit_init
acpi_numa_processor_affinity_init
acpi_numa_memory_affinity_init
acpi_numa_fixup
acpi_register_gsi
acpi_unregister_gsi
acpi_parse_fadt
early_acpi_boot_init
acpi_boot_init
acpi_gsi_to_irq
acpi_isa_irq_to_gsi
acpi_map_cpu2node
setup_additional_cpus
prefill_possible_map
_acpi_map_lsapic
acpi_map_cpu
acpi_unmap_cpu
acpi_map_iosapic
acpi_map_iosapics
acpi_register_ioapic
acpi_unregister_ioapic
acpi_suspend_lowlevel
   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  *  acpi.c - Architecture-Specific Low-Level ACPI Support
   4  *
   5  *  Copyright (C) 1999 VA Linux Systems
   6  *  Copyright (C) 1999,2000 Walt Drummond <drummond@valinux.com>
   7  *  Copyright (C) 2000, 2002-2003 Hewlett-Packard Co.
   8  *      David Mosberger-Tang <davidm@hpl.hp.com>
   9  *  Copyright (C) 2000 Intel Corp.
  10  *  Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
  11  *  Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
  12  *  Copyright (C) 2001 Jenna Hall <jenna.s.hall@intel.com>
  13  *  Copyright (C) 2001 Takayoshi Kochi <t-kochi@bq.jp.nec.com>
  14  *  Copyright (C) 2002 Erich Focht <efocht@ess.nec.de>
  15  *  Copyright (C) 2004 Ashok Raj <ashok.raj@intel.com>
  16  */
  17 
  18 #include <linux/module.h>
  19 #include <linux/init.h>
  20 #include <linux/kernel.h>
  21 #include <linux/sched.h>
  22 #include <linux/smp.h>
  23 #include <linux/string.h>
  24 #include <linux/types.h>
  25 #include <linux/irq.h>
  26 #include <linux/acpi.h>
  27 #include <linux/efi.h>
  28 #include <linux/mmzone.h>
  29 #include <linux/nodemask.h>
  30 #include <linux/slab.h>
  31 #include <acpi/processor.h>
  32 #include <asm/io.h>
  33 #include <asm/iosapic.h>
  34 #include <asm/page.h>
  35 #include <asm/numa.h>
  36 #include <asm/sal.h>
  37 #include <asm/cyclone.h>
  38 
  39 #define PREFIX                  "ACPI: "
  40 
  41 int acpi_lapic;
  42 unsigned int acpi_cpei_override;
  43 unsigned int acpi_cpei_phys_cpuid;
  44 
  45 unsigned long acpi_wakeup_address = 0;
  46 
  47 #define ACPI_MAX_PLATFORM_INTERRUPTS    256
  48 
  49 /* Array to record platform interrupt vectors for generic interrupt routing. */
  50 int platform_intr_list[ACPI_MAX_PLATFORM_INTERRUPTS] = {
  51         [0 ... ACPI_MAX_PLATFORM_INTERRUPTS - 1] = -1
  52 };
  53 
  54 enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC;
  55 
  56 /*
  57  * Interrupt routing API for device drivers.  Provides interrupt vector for
  58  * a generic platform event.  Currently only CPEI is implemented.
  59  */
  60 int acpi_request_vector(u32 int_type)
  61 {
  62         int vector = -1;
  63 
  64         if (int_type < ACPI_MAX_PLATFORM_INTERRUPTS) {
  65                 /* corrected platform error interrupt */
  66                 vector = platform_intr_list[int_type];
  67         } else
  68                 printk(KERN_ERR
  69                        "acpi_request_vector(): invalid interrupt type\n");
  70         return vector;
  71 }
  72 
  73 void __init __iomem *__acpi_map_table(unsigned long phys, unsigned long size)
  74 {
  75         return __va(phys);
  76 }
  77 
  78 void __init __acpi_unmap_table(void __iomem *map, unsigned long size)
  79 {
  80 }
  81 
  82 /* --------------------------------------------------------------------------
  83                             Boot-time Table Parsing
  84    -------------------------------------------------------------------------- */
  85 
  86 static int available_cpus __initdata;
  87 struct acpi_table_madt *acpi_madt __initdata;
  88 static u8 has_8259;
  89 
  90 static int __init
  91 acpi_parse_lapic_addr_ovr(union acpi_subtable_headers * header,
  92                           const unsigned long end)
  93 {
  94         struct acpi_madt_local_apic_override *lapic;
  95 
  96         lapic = (struct acpi_madt_local_apic_override *)header;
  97 
  98         if (BAD_MADT_ENTRY(lapic, end))
  99                 return -EINVAL;
 100 
 101         if (lapic->address) {
 102                 iounmap(ipi_base_addr);
 103                 ipi_base_addr = ioremap(lapic->address, 0);
 104         }
 105         return 0;
 106 }
 107 
 108 static int __init
 109 acpi_parse_lsapic(union acpi_subtable_headers *header, const unsigned long end)
 110 {
 111         struct acpi_madt_local_sapic *lsapic;
 112 
 113         lsapic = (struct acpi_madt_local_sapic *)header;
 114 
 115         /*Skip BAD_MADT_ENTRY check, as lsapic size could vary */
 116 
 117         if (lsapic->lapic_flags & ACPI_MADT_ENABLED) {
 118 #ifdef CONFIG_SMP
 119                 smp_boot_data.cpu_phys_id[available_cpus] =
 120                     (lsapic->id << 8) | lsapic->eid;
 121 #endif
 122                 ++available_cpus;
 123         }
 124 
 125         total_cpus++;
 126         return 0;
 127 }
 128 
 129 static int __init
 130 acpi_parse_lapic_nmi(union acpi_subtable_headers * header, const unsigned long end)
 131 {
 132         struct acpi_madt_local_apic_nmi *lacpi_nmi;
 133 
 134         lacpi_nmi = (struct acpi_madt_local_apic_nmi *)header;
 135 
 136         if (BAD_MADT_ENTRY(lacpi_nmi, end))
 137                 return -EINVAL;
 138 
 139         /* TBD: Support lapic_nmi entries */
 140         return 0;
 141 }
 142 
 143 static int __init
 144 acpi_parse_iosapic(union acpi_subtable_headers * header, const unsigned long end)
 145 {
 146         struct acpi_madt_io_sapic *iosapic;
 147 
 148         iosapic = (struct acpi_madt_io_sapic *)header;
 149 
 150         if (BAD_MADT_ENTRY(iosapic, end))
 151                 return -EINVAL;
 152 
 153         return iosapic_init(iosapic->address, iosapic->global_irq_base);
 154 }
 155 
 156 static unsigned int __initdata acpi_madt_rev;
 157 
 158 static int __init
 159 acpi_parse_plat_int_src(union acpi_subtable_headers * header,
 160                         const unsigned long end)
 161 {
 162         struct acpi_madt_interrupt_source *plintsrc;
 163         int vector;
 164 
 165         plintsrc = (struct acpi_madt_interrupt_source *)header;
 166 
 167         if (BAD_MADT_ENTRY(plintsrc, end))
 168                 return -EINVAL;
 169 
 170         /*
 171          * Get vector assignment for this interrupt, set attributes,
 172          * and program the IOSAPIC routing table.
 173          */
 174         vector = iosapic_register_platform_intr(plintsrc->type,
 175                                                 plintsrc->global_irq,
 176                                                 plintsrc->io_sapic_vector,
 177                                                 plintsrc->eid,
 178                                                 plintsrc->id,
 179                                                 ((plintsrc->inti_flags & ACPI_MADT_POLARITY_MASK) ==
 180                                                  ACPI_MADT_POLARITY_ACTIVE_HIGH) ?
 181                                                 IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
 182                                                 ((plintsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) ==
 183                                                  ACPI_MADT_TRIGGER_EDGE) ?
 184                                                 IOSAPIC_EDGE : IOSAPIC_LEVEL);
 185 
 186         platform_intr_list[plintsrc->type] = vector;
 187         if (acpi_madt_rev > 1) {
 188                 acpi_cpei_override = plintsrc->flags & ACPI_MADT_CPEI_OVERRIDE;
 189         }
 190 
 191         /*
 192          * Save the physical id, so we can check when its being removed
 193          */
 194         acpi_cpei_phys_cpuid = ((plintsrc->id << 8) | (plintsrc->eid)) & 0xffff;
 195 
 196         return 0;
 197 }
 198 
 199 #ifdef CONFIG_HOTPLUG_CPU
 200 unsigned int can_cpei_retarget(void)
 201 {
 202         extern int cpe_vector;
 203         extern unsigned int force_cpei_retarget;
 204 
 205         /*
 206          * Only if CPEI is supported and the override flag
 207          * is present, otherwise return that its re-targettable
 208          * if we are in polling mode.
 209          */
 210         if (cpe_vector > 0) {
 211                 if (acpi_cpei_override || force_cpei_retarget)
 212                         return 1;
 213                 else
 214                         return 0;
 215         }
 216         return 1;
 217 }
 218 
 219 unsigned int is_cpu_cpei_target(unsigned int cpu)
 220 {
 221         unsigned int logical_id;
 222 
 223         logical_id = cpu_logical_id(acpi_cpei_phys_cpuid);
 224 
 225         if (logical_id == cpu)
 226                 return 1;
 227         else
 228                 return 0;
 229 }
 230 
 231 void set_cpei_target_cpu(unsigned int cpu)
 232 {
 233         acpi_cpei_phys_cpuid = cpu_physical_id(cpu);
 234 }
 235 #endif
 236 
 237 unsigned int get_cpei_target_cpu(void)
 238 {
 239         return acpi_cpei_phys_cpuid;
 240 }
 241 
 242 static int __init
 243 acpi_parse_int_src_ovr(union acpi_subtable_headers * header,
 244                        const unsigned long end)
 245 {
 246         struct acpi_madt_interrupt_override *p;
 247 
 248         p = (struct acpi_madt_interrupt_override *)header;
 249 
 250         if (BAD_MADT_ENTRY(p, end))
 251                 return -EINVAL;
 252 
 253         iosapic_override_isa_irq(p->source_irq, p->global_irq,
 254                                  ((p->inti_flags & ACPI_MADT_POLARITY_MASK) ==
 255                                   ACPI_MADT_POLARITY_ACTIVE_LOW) ?
 256                                  IOSAPIC_POL_LOW : IOSAPIC_POL_HIGH,
 257                                  ((p->inti_flags & ACPI_MADT_TRIGGER_MASK) ==
 258                                  ACPI_MADT_TRIGGER_LEVEL) ?
 259                                  IOSAPIC_LEVEL : IOSAPIC_EDGE);
 260         return 0;
 261 }
 262 
 263 static int __init
 264 acpi_parse_nmi_src(union acpi_subtable_headers * header, const unsigned long end)
 265 {
 266         struct acpi_madt_nmi_source *nmi_src;
 267 
 268         nmi_src = (struct acpi_madt_nmi_source *)header;
 269 
 270         if (BAD_MADT_ENTRY(nmi_src, end))
 271                 return -EINVAL;
 272 
 273         /* TBD: Support nimsrc entries */
 274         return 0;
 275 }
 276 
 277 static void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 278 {
 279         if (!strncmp(oem_id, "IBM", 3) && (!strncmp(oem_table_id, "SERMOW", 6))) {
 280 
 281                 /*
 282                  * Unfortunately ITC_DRIFT is not yet part of the
 283                  * official SAL spec, so the ITC_DRIFT bit is not
 284                  * set by the BIOS on this hardware.
 285                  */
 286                 sal_platform_features |= IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT;
 287 
 288                 cyclone_setup();
 289         }
 290 }
 291 
 292 static int __init acpi_parse_madt(struct acpi_table_header *table)
 293 {
 294         acpi_madt = (struct acpi_table_madt *)table;
 295 
 296         acpi_madt_rev = acpi_madt->header.revision;
 297 
 298         /* remember the value for reference after free_initmem() */
 299 #ifdef CONFIG_ITANIUM
 300         has_8259 = 1;           /* Firmware on old Itanium systems is broken */
 301 #else
 302         has_8259 = acpi_madt->flags & ACPI_MADT_PCAT_COMPAT;
 303 #endif
 304         iosapic_system_init(has_8259);
 305 
 306         /* Get base address of IPI Message Block */
 307 
 308         if (acpi_madt->address)
 309                 ipi_base_addr = ioremap(acpi_madt->address, 0);
 310 
 311         printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr);
 312 
 313         acpi_madt_oem_check(acpi_madt->header.oem_id,
 314                             acpi_madt->header.oem_table_id);
 315 
 316         return 0;
 317 }
 318 
 319 #ifdef CONFIG_ACPI_NUMA
 320 
 321 #undef SLIT_DEBUG
 322 
 323 #define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32)
 324 
 325 static int __initdata srat_num_cpus;    /* number of cpus */
 326 static u32 pxm_flag[PXM_FLAG_LEN];
 327 #define pxm_bit_set(bit)        (set_bit(bit,(void *)pxm_flag))
 328 #define pxm_bit_test(bit)       (test_bit(bit,(void *)pxm_flag))
 329 static struct acpi_table_slit __initdata *slit_table;
 330 cpumask_t early_cpu_possible_map = CPU_MASK_NONE;
 331 
 332 static int __init
 333 get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa)
 334 {
 335         int pxm;
 336 
 337         pxm = pa->proximity_domain_lo;
 338         if (acpi_srat_revision >= 2)
 339                 pxm += pa->proximity_domain_hi[0] << 8;
 340         return pxm;
 341 }
 342 
 343 static int __init
 344 get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma)
 345 {
 346         int pxm;
 347 
 348         pxm = ma->proximity_domain;
 349         if (acpi_srat_revision <= 1)
 350                 pxm &= 0xff;
 351 
 352         return pxm;
 353 }
 354 
 355 /*
 356  * ACPI 2.0 SLIT (System Locality Information Table)
 357  * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf
 358  */
 359 void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
 360 {
 361         u32 len;
 362 
 363         len = sizeof(struct acpi_table_header) + 8
 364             + slit->locality_count * slit->locality_count;
 365         if (slit->header.length != len) {
 366                 printk(KERN_ERR
 367                        "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n",
 368                        len, slit->header.length);
 369                 return;
 370         }
 371         slit_table = slit;
 372 }
 373 
 374 void __init
 375 acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 376 {
 377         int pxm;
 378 
 379         if (!(pa->flags & ACPI_SRAT_CPU_ENABLED))
 380                 return;
 381 
 382         if (srat_num_cpus >= ARRAY_SIZE(node_cpuid)) {
 383                 printk_once(KERN_WARNING
 384                             "node_cpuid[%ld] is too small, may not be able to use all cpus\n",
 385                             ARRAY_SIZE(node_cpuid));
 386                 return;
 387         }
 388         pxm = get_processor_proximity_domain(pa);
 389 
 390         /* record this node in proximity bitmap */
 391         pxm_bit_set(pxm);
 392 
 393         node_cpuid[srat_num_cpus].phys_id =
 394             (pa->apic_id << 8) | (pa->local_sapic_eid);
 395         /* nid should be overridden as logical node id later */
 396         node_cpuid[srat_num_cpus].nid = pxm;
 397         cpumask_set_cpu(srat_num_cpus, &early_cpu_possible_map);
 398         srat_num_cpus++;
 399 }
 400 
 401 int __init
 402 acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 403 {
 404         unsigned long paddr, size;
 405         int pxm;
 406         struct node_memblk_s *p, *q, *pend;
 407 
 408         pxm = get_memory_proximity_domain(ma);
 409 
 410         /* fill node memory chunk structure */
 411         paddr = ma->base_address;
 412         size = ma->length;
 413 
 414         /* Ignore disabled entries */
 415         if (!(ma->flags & ACPI_SRAT_MEM_ENABLED))
 416                 return -1;
 417 
 418         if (num_node_memblks >= NR_NODE_MEMBLKS) {
 419                 pr_err("NUMA: too many memblk ranges\n");
 420                 return -EINVAL;
 421         }
 422 
 423         /* record this node in proximity bitmap */
 424         pxm_bit_set(pxm);
 425 
 426         /* Insertion sort based on base address */
 427         pend = &node_memblk[num_node_memblks];
 428         for (p = &node_memblk[0]; p < pend; p++) {
 429                 if (paddr < p->start_paddr)
 430                         break;
 431         }
 432         if (p < pend) {
 433                 for (q = pend - 1; q >= p; q--)
 434                         *(q + 1) = *q;
 435         }
 436         p->start_paddr = paddr;
 437         p->size = size;
 438         p->nid = pxm;
 439         num_node_memblks++;
 440         return 0;
 441 }
 442 
 443 void __init acpi_numa_fixup(void)
 444 {
 445         int i, j, node_from, node_to;
 446 
 447         /* If there's no SRAT, fix the phys_id and mark node 0 online */
 448         if (srat_num_cpus == 0) {
 449                 node_set_online(0);
 450                 node_cpuid[0].phys_id = hard_smp_processor_id();
 451                 return;
 452         }
 453 
 454         /*
 455          * MCD - This can probably be dropped now.  No need for pxm ID to node ID
 456          * mapping with sparse node numbering iff MAX_PXM_DOMAINS <= MAX_NUMNODES.
 457          */
 458         nodes_clear(node_online_map);
 459         for (i = 0; i < MAX_PXM_DOMAINS; i++) {
 460                 if (pxm_bit_test(i)) {
 461                         int nid = acpi_map_pxm_to_node(i);
 462                         node_set_online(nid);
 463                 }
 464         }
 465 
 466         /* set logical node id in memory chunk structure */
 467         for (i = 0; i < num_node_memblks; i++)
 468                 node_memblk[i].nid = pxm_to_node(node_memblk[i].nid);
 469 
 470         /* assign memory bank numbers for each chunk on each node */
 471         for_each_online_node(i) {
 472                 int bank;
 473 
 474                 bank = 0;
 475                 for (j = 0; j < num_node_memblks; j++)
 476                         if (node_memblk[j].nid == i)
 477                                 node_memblk[j].bank = bank++;
 478         }
 479 
 480         /* set logical node id in cpu structure */
 481         for_each_possible_early_cpu(i)
 482                 node_cpuid[i].nid = pxm_to_node(node_cpuid[i].nid);
 483 
 484         printk(KERN_INFO "Number of logical nodes in system = %d\n",
 485                num_online_nodes());
 486         printk(KERN_INFO "Number of memory chunks in system = %d\n",
 487                num_node_memblks);
 488 
 489         if (!slit_table) {
 490                 for (i = 0; i < MAX_NUMNODES; i++)
 491                         for (j = 0; j < MAX_NUMNODES; j++)
 492                                 slit_distance(i, j) = i == j ?
 493                                         LOCAL_DISTANCE : REMOTE_DISTANCE;
 494                 return;
 495         }
 496 
 497         memset(numa_slit, -1, sizeof(numa_slit));
 498         for (i = 0; i < slit_table->locality_count; i++) {
 499                 if (!pxm_bit_test(i))
 500                         continue;
 501                 node_from = pxm_to_node(i);
 502                 for (j = 0; j < slit_table->locality_count; j++) {
 503                         if (!pxm_bit_test(j))
 504                                 continue;
 505                         node_to = pxm_to_node(j);
 506                         slit_distance(node_from, node_to) =
 507                             slit_table->entry[i * slit_table->locality_count + j];
 508                 }
 509         }
 510 
 511 #ifdef SLIT_DEBUG
 512         printk("ACPI 2.0 SLIT locality table:\n");
 513         for_each_online_node(i) {
 514                 for_each_online_node(j)
 515                     printk("%03d ", node_distance(i, j));
 516                 printk("\n");
 517         }
 518 #endif
 519 }
 520 #endif                          /* CONFIG_ACPI_NUMA */
 521 
 522 /*
 523  * success: return IRQ number (>=0)
 524  * failure: return < 0
 525  */
 526 int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
 527 {
 528         if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
 529                 return gsi;
 530 
 531         if (has_8259 && gsi < 16)
 532                 return isa_irq_to_vector(gsi);
 533 
 534         return iosapic_register_intr(gsi,
 535                                      (polarity ==
 536                                       ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH :
 537                                      IOSAPIC_POL_LOW,
 538                                      (triggering ==
 539                                       ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE :
 540                                      IOSAPIC_LEVEL);
 541 }
 542 EXPORT_SYMBOL_GPL(acpi_register_gsi);
 543 
 544 void acpi_unregister_gsi(u32 gsi)
 545 {
 546         if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
 547                 return;
 548 
 549         if (has_8259 && gsi < 16)
 550                 return;
 551 
 552         iosapic_unregister_intr(gsi);
 553 }
 554 EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
 555 
 556 static int __init acpi_parse_fadt(struct acpi_table_header *table)
 557 {
 558         struct acpi_table_header *fadt_header;
 559         struct acpi_table_fadt *fadt;
 560 
 561         fadt_header = (struct acpi_table_header *)table;
 562         if (fadt_header->revision != 3)
 563                 return -ENODEV; /* Only deal with ACPI 2.0 FADT */
 564 
 565         fadt = (struct acpi_table_fadt *)fadt_header;
 566 
 567         acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE,
 568                                  ACPI_ACTIVE_LOW);
 569         return 0;
 570 }
 571 
 572 int __init early_acpi_boot_init(void)
 573 {
 574         int ret;
 575 
 576         /*
 577          * do a partial walk of MADT to determine how many CPUs
 578          * we have including offline CPUs
 579          */
 580         if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
 581                 printk(KERN_ERR PREFIX "Can't find MADT\n");
 582                 return 0;
 583         }
 584 
 585         ret = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
 586                 acpi_parse_lsapic, NR_CPUS);
 587         if (ret < 1)
 588                 printk(KERN_ERR PREFIX
 589                        "Error parsing MADT - no LAPIC entries\n");
 590         else
 591                 acpi_lapic = 1;
 592 
 593 #ifdef CONFIG_SMP
 594         if (available_cpus == 0) {
 595                 printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n");
 596                 printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id());
 597                 smp_boot_data.cpu_phys_id[available_cpus] =
 598                     hard_smp_processor_id();
 599                 available_cpus = 1;     /* We've got at least one of these, no? */
 600         }
 601         smp_boot_data.cpu_count = available_cpus;
 602 #endif
 603         /* Make boot-up look pretty */
 604         printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus,
 605                total_cpus);
 606 
 607         return 0;
 608 }
 609 
 610 int __init acpi_boot_init(void)
 611 {
 612 
 613         /*
 614          * MADT
 615          * ----
 616          * Parse the Multiple APIC Description Table (MADT), if exists.
 617          * Note that this table provides platform SMP configuration
 618          * information -- the successor to MPS tables.
 619          */
 620 
 621         if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
 622                 printk(KERN_ERR PREFIX "Can't find MADT\n");
 623                 goto skip_madt;
 624         }
 625 
 626         /* Local APIC */
 627 
 628         if (acpi_table_parse_madt
 629             (ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, acpi_parse_lapic_addr_ovr, 0) < 0)
 630                 printk(KERN_ERR PREFIX
 631                        "Error parsing LAPIC address override entry\n");
 632 
 633         if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0)
 634             < 0)
 635                 printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
 636 
 637         /* I/O APIC */
 638 
 639         if (acpi_table_parse_madt
 640             (ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) {
 641                 printk(KERN_ERR PREFIX
 642                        "Error parsing MADT - no IOSAPIC entries\n");
 643         }
 644 
 645         /* System-Level Interrupt Routing */
 646 
 647         if (acpi_table_parse_madt
 648             (ACPI_MADT_TYPE_INTERRUPT_SOURCE, acpi_parse_plat_int_src,
 649              ACPI_MAX_PLATFORM_INTERRUPTS) < 0)
 650                 printk(KERN_ERR PREFIX
 651                        "Error parsing platform interrupt source entry\n");
 652 
 653         if (acpi_table_parse_madt
 654             (ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr, 0) < 0)
 655                 printk(KERN_ERR PREFIX
 656                        "Error parsing interrupt source overrides entry\n");
 657 
 658         if (acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src, 0) < 0)
 659                 printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
 660       skip_madt:
 661 
 662         /*
 663          * FADT says whether a legacy keyboard controller is present.
 664          * The FADT also contains an SCI_INT line, by which the system
 665          * gets interrupts such as power and sleep buttons.  If it's not
 666          * on a Legacy interrupt, it needs to be setup.
 667          */
 668         if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt))
 669                 printk(KERN_ERR PREFIX "Can't find FADT\n");
 670 
 671 #ifdef CONFIG_ACPI_NUMA
 672 #ifdef CONFIG_SMP
 673         if (srat_num_cpus == 0) {
 674                 int cpu, i = 1;
 675                 for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++)
 676                         if (smp_boot_data.cpu_phys_id[cpu] !=
 677                             hard_smp_processor_id())
 678                                 node_cpuid[i++].phys_id =
 679                                     smp_boot_data.cpu_phys_id[cpu];
 680         }
 681 #endif
 682         build_cpu_to_node_map();
 683 #endif
 684         return 0;
 685 }
 686 
 687 int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
 688 {
 689         int tmp;
 690 
 691         if (has_8259 && gsi < 16)
 692                 *irq = isa_irq_to_vector(gsi);
 693         else {
 694                 tmp = gsi_to_irq(gsi);
 695                 if (tmp == -1)
 696                         return -1;
 697                 *irq = tmp;
 698         }
 699         return 0;
 700 }
 701 
 702 int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
 703 {
 704         if (isa_irq >= 16)
 705                 return -1;
 706         *gsi = isa_irq;
 707         return 0;
 708 }
 709 
 710 /*
 711  *  ACPI based hotplug CPU support
 712  */
 713 #ifdef CONFIG_ACPI_HOTPLUG_CPU
 714 int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 715 {
 716 #ifdef CONFIG_ACPI_NUMA
 717         /*
 718          * We don't have cpu-only-node hotadd. But if the system equips
 719          * SRAT table, pxm is already found and node is ready.
 720          * So, just pxm_to_nid(pxm) is OK.
 721          * This code here is for the system which doesn't have full SRAT
 722          * table for possible cpus.
 723          */
 724         node_cpuid[cpu].phys_id = physid;
 725         node_cpuid[cpu].nid = acpi_get_node(handle);
 726 #endif
 727         return 0;
 728 }
 729 
 730 int additional_cpus __initdata = -1;
 731 
 732 static __init int setup_additional_cpus(char *s)
 733 {
 734         if (s)
 735                 additional_cpus = simple_strtol(s, NULL, 0);
 736 
 737         return 0;
 738 }
 739 
 740 early_param("additional_cpus", setup_additional_cpus);
 741 
 742 /*
 743  * cpu_possible_mask should be static, it cannot change as CPUs
 744  * are onlined, or offlined. The reason is per-cpu data-structures
 745  * are allocated by some modules at init time, and dont expect to
 746  * do this dynamically on cpu arrival/departure.
 747  * cpu_present_mask on the other hand can change dynamically.
 748  * In case when cpu_hotplug is not compiled, then we resort to current
 749  * behaviour, which is cpu_possible == cpu_present.
 750  * - Ashok Raj
 751  *
 752  * Three ways to find out the number of additional hotplug CPUs:
 753  * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
 754  * - The user can overwrite it with additional_cpus=NUM
 755  * - Otherwise don't reserve additional CPUs.
 756  */
 757 __init void prefill_possible_map(void)
 758 {
 759         int i;
 760         int possible, disabled_cpus;
 761 
 762         disabled_cpus = total_cpus - available_cpus;
 763 
 764         if (additional_cpus == -1) {
 765                 if (disabled_cpus > 0)
 766                         additional_cpus = disabled_cpus;
 767                 else
 768                         additional_cpus = 0;
 769         }
 770 
 771         possible = available_cpus + additional_cpus;
 772 
 773         if (possible > nr_cpu_ids)
 774                 possible = nr_cpu_ids;
 775 
 776         printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
 777                 possible, max((possible - available_cpus), 0));
 778 
 779         for (i = 0; i < possible; i++)
 780                 set_cpu_possible(i, true);
 781 }
 782 
 783 static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
 784 {
 785         cpumask_t tmp_map;
 786         int cpu;
 787 
 788         cpumask_complement(&tmp_map, cpu_present_mask);
 789         cpu = cpumask_first(&tmp_map);
 790         if (cpu >= nr_cpu_ids)
 791                 return -EINVAL;
 792 
 793         acpi_map_cpu2node(handle, cpu, physid);
 794 
 795         set_cpu_present(cpu, true);
 796         ia64_cpu_to_sapicid[cpu] = physid;
 797 
 798         acpi_processor_set_pdc(handle);
 799 
 800         *pcpu = cpu;
 801         return (0);
 802 }
 803 
 804 /* wrapper to silence section mismatch warning */
 805 int __ref acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id,
 806                        int *pcpu)
 807 {
 808         return _acpi_map_lsapic(handle, physid, pcpu);
 809 }
 810 EXPORT_SYMBOL(acpi_map_cpu);
 811 
 812 int acpi_unmap_cpu(int cpu)
 813 {
 814         ia64_cpu_to_sapicid[cpu] = -1;
 815         set_cpu_present(cpu, false);
 816 
 817 #ifdef CONFIG_ACPI_NUMA
 818         /* NUMA specific cleanup's */
 819 #endif
 820 
 821         return (0);
 822 }
 823 EXPORT_SYMBOL(acpi_unmap_cpu);
 824 #endif                          /* CONFIG_ACPI_HOTPLUG_CPU */
 825 
 826 #ifdef CONFIG_ACPI_NUMA
 827 static acpi_status acpi_map_iosapic(acpi_handle handle, u32 depth,
 828                                     void *context, void **ret)
 829 {
 830         struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 831         union acpi_object *obj;
 832         struct acpi_madt_io_sapic *iosapic;
 833         unsigned int gsi_base;
 834         int node;
 835 
 836         /* Only care about objects w/ a method that returns the MADT */
 837         if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
 838                 return AE_OK;
 839 
 840         if (!buffer.length || !buffer.pointer)
 841                 return AE_OK;
 842 
 843         obj = buffer.pointer;
 844         if (obj->type != ACPI_TYPE_BUFFER ||
 845             obj->buffer.length < sizeof(*iosapic)) {
 846                 kfree(buffer.pointer);
 847                 return AE_OK;
 848         }
 849 
 850         iosapic = (struct acpi_madt_io_sapic *)obj->buffer.pointer;
 851 
 852         if (iosapic->header.type != ACPI_MADT_TYPE_IO_SAPIC) {
 853                 kfree(buffer.pointer);
 854                 return AE_OK;
 855         }
 856 
 857         gsi_base = iosapic->global_irq_base;
 858 
 859         kfree(buffer.pointer);
 860 
 861         /* OK, it's an IOSAPIC MADT entry; associate it with a node */
 862         node = acpi_get_node(handle);
 863         if (node == NUMA_NO_NODE || !node_online(node) ||
 864             cpumask_empty(cpumask_of_node(node)))
 865                 return AE_OK;
 866 
 867         /* We know a gsi to node mapping! */
 868         map_iosapic_to_node(gsi_base, node);
 869         return AE_OK;
 870 }
 871 
 872 static int __init
 873 acpi_map_iosapics (void)
 874 {
 875         acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
 876         return 0;
 877 }
 878 
 879 fs_initcall(acpi_map_iosapics);
 880 #endif                          /* CONFIG_ACPI_NUMA */
 881 
 882 int __ref acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
 883 {
 884         int err;
 885 
 886         if ((err = iosapic_init(phys_addr, gsi_base)))
 887                 return err;
 888 
 889 #ifdef CONFIG_ACPI_NUMA
 890         acpi_map_iosapic(handle, 0, NULL, NULL);
 891 #endif                          /* CONFIG_ACPI_NUMA */
 892 
 893         return 0;
 894 }
 895 
 896 EXPORT_SYMBOL(acpi_register_ioapic);
 897 
 898 int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
 899 {
 900         return iosapic_remove(gsi_base);
 901 }
 902 
 903 EXPORT_SYMBOL(acpi_unregister_ioapic);
 904 
 905 /*
 906  * acpi_suspend_lowlevel() - save kernel state and suspend.
 907  *
 908  * TBD when when IA64 starts to support suspend...
 909  */
 910 int acpi_suspend_lowlevel(void) { return 0; }
/* [<][>][^][v][top][bottom][index][help] */
root/arch/ia64/kernel/acpi.c

DEFINITIONS
