root/drivers/scsi/dpt/dpti_i2o.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2 #ifndef _SCSI_I2O_H
   3 #define _SCSI_I2O_H
   4 
   5 /* I2O kernel space accessible structures/APIs
   6  *
   7  * (c) Copyright 1999, 2000 Red Hat Software
   8  *
   9  *************************************************************************
  10  *
  11  * This header file defined the I2O APIs/structures for use by
  12  * the I2O kernel modules.
  13  */
  14 
  15 #ifdef __KERNEL__       /* This file to be included by kernel only */
  16 
  17 #include <linux/i2o-dev.h>
  18 
  19 #include <linux/notifier.h>
  20 #include <linux/atomic.h>
  21 
  22 
  23 /*
  24  *      Tunable parameters first
  25  */
  26 
  27 /* How many different OSM's are we allowing */
  28 #define MAX_I2O_MODULES         64
  29 
  30 #define I2O_EVT_CAPABILITY_OTHER                0x01
  31 #define I2O_EVT_CAPABILITY_CHANGED              0x02
  32 
  33 #define I2O_EVT_SENSOR_STATE_CHANGED            0x01
  34 
  35 //#ifdef __KERNEL__   /* ioctl stuff only thing exported to users */
  36 
  37 #define I2O_MAX_MANAGERS        4
  38 
  39 /*
  40  *      I2O Interface Objects
  41  */
  42 
  43 #include <linux/wait.h>
  44 typedef wait_queue_head_t adpt_wait_queue_head_t;
  45 #define ADPT_DECLARE_WAIT_QUEUE_HEAD(wait) DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait)
  46 typedef wait_queue_entry_t adpt_wait_queue_entry_t;
  47 
  48 /*
  49  * message structures
  50  */
  51 
  52 struct i2o_message
  53 {
  54         u8      version_offset;
  55         u8      flags;
  56         u16     size;
  57         u32     target_tid:12;
  58         u32     init_tid:12;
  59         u32     function:8;
  60         u32     initiator_context;
  61         /* List follows */
  62 };
  63 
  64 struct adpt_device;
  65 struct _adpt_hba;
  66 struct i2o_device
  67 {
  68         struct i2o_device *next;        /* Chain */
  69         struct i2o_device *prev;
  70 
  71         char dev_name[8];               /* linux /dev name if available */
  72         i2o_lct_entry lct_data;/* Device LCT information */
  73         u32 flags;
  74         struct proc_dir_entry* proc_entry;      /* /proc dir */
  75         struct adpt_device *owner;
  76         struct _adpt_hba *controller;   /* Controlling IOP */
  77 };
  78 
  79 /*
  80  *      Each I2O controller has one of these objects
  81  */
  82 
  83 struct i2o_controller
  84 {
  85         char name[16];
  86         int unit;
  87         int type;
  88         int enabled;
  89 
  90         struct notifier_block *event_notifer;   /* Events */
  91         atomic_t users;
  92         struct i2o_device *devices;             /* I2O device chain */
  93         struct i2o_controller *next;            /* Controller chain */
  94 
  95 };
  96 
  97 /*
  98  * I2O System table entry
  99  */
 100 struct i2o_sys_tbl_entry
 101 {
 102         u16     org_id;
 103         u16     reserved1;
 104         u32     iop_id:12;
 105         u32     reserved2:20;
 106         u16     seg_num:12;
 107         u16     i2o_version:4;
 108         u8      iop_state;
 109         u8      msg_type;
 110         u16     frame_size;
 111         u16     reserved3;
 112         u32     last_changed;
 113         u32     iop_capabilities;
 114         u32     inbound_low;
 115         u32     inbound_high;
 116 };
 117 
 118 struct i2o_sys_tbl
 119 {
 120         u8      num_entries;
 121         u8      version;
 122         u16     reserved1;
 123         u32     change_ind;
 124         u32     reserved2;
 125         u32     reserved3;
 126         struct i2o_sys_tbl_entry iops[0];
 127 };
 128 
 129 /*
 130  *      I2O classes / subclasses
 131  */
 132 
 133 /*  Class ID and Code Assignments
 134  *  (LCT.ClassID.Version field)
 135  */
 136 #define    I2O_CLASS_VERSION_10                        0x00
 137 #define    I2O_CLASS_VERSION_11                        0x01
 138 
 139 /*  Class code names
 140  *  (from v1.5 Table 6-1 Class Code Assignments.)
 141  */
 142 
 143 #define    I2O_CLASS_EXECUTIVE                         0x000
 144 #define    I2O_CLASS_DDM                               0x001
 145 #define    I2O_CLASS_RANDOM_BLOCK_STORAGE              0x010
 146 #define    I2O_CLASS_SEQUENTIAL_STORAGE                0x011
 147 #define    I2O_CLASS_LAN                               0x020
 148 #define    I2O_CLASS_WAN                               0x030
 149 #define    I2O_CLASS_FIBRE_CHANNEL_PORT                0x040
 150 #define    I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL          0x041
 151 #define    I2O_CLASS_SCSI_PERIPHERAL                   0x051
 152 #define    I2O_CLASS_ATE_PORT                          0x060
 153 #define    I2O_CLASS_ATE_PERIPHERAL                    0x061
 154 #define    I2O_CLASS_FLOPPY_CONTROLLER                 0x070
 155 #define    I2O_CLASS_FLOPPY_DEVICE                     0x071
 156 #define    I2O_CLASS_BUS_ADAPTER_PORT                  0x080
 157 #define    I2O_CLASS_PEER_TRANSPORT_AGENT              0x090
 158 #define    I2O_CLASS_PEER_TRANSPORT                    0x091
 159 
 160 /*  Rest of 0x092 - 0x09f reserved for peer-to-peer classes
 161  */
 162 
 163 #define    I2O_CLASS_MATCH_ANYCLASS                    0xffffffff
 164 
 165 /*  Subclasses
 166  */
 167 
 168 #define    I2O_SUBCLASS_i960                           0x001
 169 #define    I2O_SUBCLASS_HDM                            0x020
 170 #define    I2O_SUBCLASS_ISM                            0x021
 171 
 172 /* Operation functions */
 173 
 174 #define I2O_PARAMS_FIELD_GET    0x0001
 175 #define I2O_PARAMS_LIST_GET     0x0002
 176 #define I2O_PARAMS_MORE_GET     0x0003
 177 #define I2O_PARAMS_SIZE_GET     0x0004
 178 #define I2O_PARAMS_TABLE_GET    0x0005
 179 #define I2O_PARAMS_FIELD_SET    0x0006
 180 #define I2O_PARAMS_LIST_SET     0x0007
 181 #define I2O_PARAMS_ROW_ADD      0x0008
 182 #define I2O_PARAMS_ROW_DELETE   0x0009
 183 #define I2O_PARAMS_TABLE_CLEAR  0x000A
 184 
 185 /*
 186  *      I2O serial number conventions / formats
 187  *      (circa v1.5)
 188  */
 189 
 190 #define    I2O_SNFORMAT_UNKNOWN                        0
 191 #define    I2O_SNFORMAT_BINARY                         1
 192 #define    I2O_SNFORMAT_ASCII                          2
 193 #define    I2O_SNFORMAT_UNICODE                        3
 194 #define    I2O_SNFORMAT_LAN48_MAC                      4
 195 #define    I2O_SNFORMAT_WAN                            5
 196 
 197 /* Plus new in v2.0 (Yellowstone pdf doc)
 198  */
 199 
 200 #define    I2O_SNFORMAT_LAN64_MAC                      6
 201 #define    I2O_SNFORMAT_DDM                            7
 202 #define    I2O_SNFORMAT_IEEE_REG64                     8
 203 #define    I2O_SNFORMAT_IEEE_REG128                    9
 204 #define    I2O_SNFORMAT_UNKNOWN2                       0xff
 205 
 206 /* Transaction Reply Lists (TRL) Control Word structure */
 207 
 208 #define TRL_SINGLE_FIXED_LENGTH         0x00
 209 #define TRL_SINGLE_VARIABLE_LENGTH      0x40
 210 #define TRL_MULTIPLE_FIXED_LENGTH       0x80
 211 
 212 /*
 213  *      Messaging API values
 214  */
 215 
 216 #define I2O_CMD_ADAPTER_ASSIGN          0xB3
 217 #define I2O_CMD_ADAPTER_READ            0xB2
 218 #define I2O_CMD_ADAPTER_RELEASE         0xB5
 219 #define I2O_CMD_BIOS_INFO_SET           0xA5
 220 #define I2O_CMD_BOOT_DEVICE_SET         0xA7
 221 #define I2O_CMD_CONFIG_VALIDATE         0xBB
 222 #define I2O_CMD_CONN_SETUP              0xCA
 223 #define I2O_CMD_DDM_DESTROY             0xB1
 224 #define I2O_CMD_DDM_ENABLE              0xD5
 225 #define I2O_CMD_DDM_QUIESCE             0xC7
 226 #define I2O_CMD_DDM_RESET               0xD9
 227 #define I2O_CMD_DDM_SUSPEND             0xAF
 228 #define I2O_CMD_DEVICE_ASSIGN           0xB7
 229 #define I2O_CMD_DEVICE_RELEASE          0xB9
 230 #define I2O_CMD_HRT_GET                 0xA8
 231 #define I2O_CMD_ADAPTER_CLEAR           0xBE
 232 #define I2O_CMD_ADAPTER_CONNECT         0xC9
 233 #define I2O_CMD_ADAPTER_RESET           0xBD
 234 #define I2O_CMD_LCT_NOTIFY              0xA2
 235 #define I2O_CMD_OUTBOUND_INIT           0xA1
 236 #define I2O_CMD_PATH_ENABLE             0xD3
 237 #define I2O_CMD_PATH_QUIESCE            0xC5
 238 #define I2O_CMD_PATH_RESET              0xD7
 239 #define I2O_CMD_STATIC_MF_CREATE        0xDD
 240 #define I2O_CMD_STATIC_MF_RELEASE       0xDF
 241 #define I2O_CMD_STATUS_GET              0xA0
 242 #define I2O_CMD_SW_DOWNLOAD             0xA9
 243 #define I2O_CMD_SW_UPLOAD               0xAB
 244 #define I2O_CMD_SW_REMOVE               0xAD
 245 #define I2O_CMD_SYS_ENABLE              0xD1
 246 #define I2O_CMD_SYS_MODIFY              0xC1
 247 #define I2O_CMD_SYS_QUIESCE             0xC3
 248 #define I2O_CMD_SYS_TAB_SET             0xA3
 249 
 250 #define I2O_CMD_UTIL_NOP                0x00
 251 #define I2O_CMD_UTIL_ABORT              0x01
 252 #define I2O_CMD_UTIL_CLAIM              0x09
 253 #define I2O_CMD_UTIL_RELEASE            0x0B
 254 #define I2O_CMD_UTIL_PARAMS_GET         0x06
 255 #define I2O_CMD_UTIL_PARAMS_SET         0x05
 256 #define I2O_CMD_UTIL_EVT_REGISTER       0x13
 257 #define I2O_CMD_UTIL_EVT_ACK            0x14
 258 #define I2O_CMD_UTIL_CONFIG_DIALOG      0x10
 259 #define I2O_CMD_UTIL_DEVICE_RESERVE     0x0D
 260 #define I2O_CMD_UTIL_DEVICE_RELEASE     0x0F
 261 #define I2O_CMD_UTIL_LOCK               0x17
 262 #define I2O_CMD_UTIL_LOCK_RELEASE       0x19
 263 #define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY 0x15
 264 
 265 #define I2O_CMD_SCSI_EXEC               0x81
 266 #define I2O_CMD_SCSI_ABORT              0x83
 267 #define I2O_CMD_SCSI_BUSRESET           0x27
 268 
 269 #define I2O_CMD_BLOCK_READ              0x30
 270 #define I2O_CMD_BLOCK_WRITE             0x31
 271 #define I2O_CMD_BLOCK_CFLUSH            0x37
 272 #define I2O_CMD_BLOCK_MLOCK             0x49
 273 #define I2O_CMD_BLOCK_MUNLOCK           0x4B
 274 #define I2O_CMD_BLOCK_MMOUNT            0x41
 275 #define I2O_CMD_BLOCK_MEJECT            0x43
 276 
 277 #define I2O_PRIVATE_MSG                 0xFF
 278 
 279 /*
 280  *      Init Outbound Q status
 281  */
 282 
 283 #define I2O_CMD_OUTBOUND_INIT_IN_PROGRESS       0x01
 284 #define I2O_CMD_OUTBOUND_INIT_REJECTED          0x02
 285 #define I2O_CMD_OUTBOUND_INIT_FAILED            0x03
 286 #define I2O_CMD_OUTBOUND_INIT_COMPLETE          0x04
 287 
 288 /*
 289  *      I2O Get Status State values
 290  */
 291 
 292 #define ADAPTER_STATE_INITIALIZING              0x01
 293 #define ADAPTER_STATE_RESET                     0x02
 294 #define ADAPTER_STATE_HOLD                      0x04
 295 #define ADAPTER_STATE_READY                     0x05
 296 #define ADAPTER_STATE_OPERATIONAL               0x08
 297 #define ADAPTER_STATE_FAILED                    0x10
 298 #define ADAPTER_STATE_FAULTED                   0x11
 299 
 300 /* I2O API function return values */
 301 
 302 #define I2O_RTN_NO_ERROR                        0
 303 #define I2O_RTN_NOT_INIT                        1
 304 #define I2O_RTN_FREE_Q_EMPTY                    2
 305 #define I2O_RTN_TCB_ERROR                       3
 306 #define I2O_RTN_TRANSACTION_ERROR               4
 307 #define I2O_RTN_ADAPTER_ALREADY_INIT            5
 308 #define I2O_RTN_MALLOC_ERROR                    6
 309 #define I2O_RTN_ADPTR_NOT_REGISTERED            7
 310 #define I2O_RTN_MSG_REPLY_TIMEOUT               8
 311 #define I2O_RTN_NO_STATUS                       9
 312 #define I2O_RTN_NO_FIRM_VER                     10
 313 #define I2O_RTN_NO_LINK_SPEED                   11
 314 
 315 /* Reply message status defines for all messages */
 316 
 317 #define I2O_REPLY_STATUS_SUCCESS                        0x00
 318 #define I2O_REPLY_STATUS_ABORT_DIRTY                    0x01
 319 #define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER         0x02
 320 #define I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER         0x03
 321 #define I2O_REPLY_STATUS_ERROR_DIRTY                    0x04
 322 #define I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER         0x05
 323 #define I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER         0x06
 324 #define I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY            0x08
 325 #define I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER 0x09
 326 #define I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER 0x0A
 327 #define I2O_REPLY_STATUS_TRANSACTION_ERROR              0x0B
 328 #define I2O_REPLY_STATUS_PROGRESS_REPORT                0x80
 329 
 330 /* Status codes and Error Information for Parameter functions */
 331 
 332 #define I2O_PARAMS_STATUS_SUCCESS               0x00
 333 #define I2O_PARAMS_STATUS_BAD_KEY_ABORT         0x01
 334 #define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE      0x02
 335 #define I2O_PARAMS_STATUS_BUFFER_FULL           0x03
 336 #define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL      0x04
 337 #define I2O_PARAMS_STATUS_FIELD_UNREADABLE      0x05
 338 #define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE     0x06
 339 #define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS   0x07
 340 #define I2O_PARAMS_STATUS_INVALID_GROUP_ID      0x08
 341 #define I2O_PARAMS_STATUS_INVALID_OPERATION     0x09
 342 #define I2O_PARAMS_STATUS_NO_KEY_FIELD          0x0A
 343 #define I2O_PARAMS_STATUS_NO_SUCH_FIELD         0x0B
 344 #define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP     0x0C
 345 #define I2O_PARAMS_STATUS_OPERATION_ERROR       0x0D
 346 #define I2O_PARAMS_STATUS_SCALAR_ERROR          0x0E
 347 #define I2O_PARAMS_STATUS_TABLE_ERROR           0x0F
 348 #define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE      0x10
 349 
 350 /* DetailedStatusCode defines for Executive, DDM, Util and Transaction error
 351  * messages: Table 3-2 Detailed Status Codes.*/
 352 
 353 #define I2O_DSC_SUCCESS                        0x0000
 354 #define I2O_DSC_BAD_KEY                        0x0002
 355 #define I2O_DSC_TCL_ERROR                      0x0003
 356 #define I2O_DSC_REPLY_BUFFER_FULL              0x0004
 357 #define I2O_DSC_NO_SUCH_PAGE                   0x0005
 358 #define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT     0x0006
 359 #define I2O_DSC_INSUFFICIENT_RESOURCE_HARD     0x0007
 360 #define I2O_DSC_CHAIN_BUFFER_TOO_LARGE         0x0009
 361 #define I2O_DSC_UNSUPPORTED_FUNCTION           0x000A
 362 #define I2O_DSC_DEVICE_LOCKED                  0x000B
 363 #define I2O_DSC_DEVICE_RESET                   0x000C
 364 #define I2O_DSC_INAPPROPRIATE_FUNCTION         0x000D
 365 #define I2O_DSC_INVALID_INITIATOR_ADDRESS      0x000E
 366 #define I2O_DSC_INVALID_MESSAGE_FLAGS          0x000F
 367 #define I2O_DSC_INVALID_OFFSET                 0x0010
 368 #define I2O_DSC_INVALID_PARAMETER              0x0011
 369 #define I2O_DSC_INVALID_REQUEST                0x0012
 370 #define I2O_DSC_INVALID_TARGET_ADDRESS         0x0013
 371 #define I2O_DSC_MESSAGE_TOO_LARGE              0x0014
 372 #define I2O_DSC_MESSAGE_TOO_SMALL              0x0015
 373 #define I2O_DSC_MISSING_PARAMETER              0x0016
 374 #define I2O_DSC_TIMEOUT                        0x0017
 375 #define I2O_DSC_UNKNOWN_ERROR                  0x0018
 376 #define I2O_DSC_UNKNOWN_FUNCTION               0x0019
 377 #define I2O_DSC_UNSUPPORTED_VERSION            0x001A
 378 #define I2O_DSC_DEVICE_BUSY                    0x001B
 379 #define I2O_DSC_DEVICE_NOT_AVAILABLE           0x001C
 380 
 381 /* Device Claim Types */
 382 #define I2O_CLAIM_PRIMARY                                       0x01000000
 383 #define I2O_CLAIM_MANAGEMENT                                    0x02000000
 384 #define I2O_CLAIM_AUTHORIZED                                    0x03000000
 385 #define I2O_CLAIM_SECONDARY                                     0x04000000
 386 
 387 /* Message header defines for VersionOffset */
 388 #define I2OVER15        0x0001
 389 #define I2OVER20        0x0002
 390 /* Default is 1.5, FIXME: Need support for both 1.5 and 2.0 */
 391 #define I2OVERSION      I2OVER15
 392 #define SGL_OFFSET_0    I2OVERSION
 393 #define SGL_OFFSET_4    (0x0040 | I2OVERSION)
 394 #define SGL_OFFSET_5    (0x0050 | I2OVERSION)
 395 #define SGL_OFFSET_6    (0x0060 | I2OVERSION)
 396 #define SGL_OFFSET_7    (0x0070 | I2OVERSION)
 397 #define SGL_OFFSET_8    (0x0080 | I2OVERSION)
 398 #define SGL_OFFSET_9    (0x0090 | I2OVERSION)
 399 #define SGL_OFFSET_10   (0x00A0 | I2OVERSION)
 400 #define SGL_OFFSET_12   (0x00C0 | I2OVERSION)
 401 
 402 #define TRL_OFFSET_5    (0x0050 | I2OVERSION)
 403 #define TRL_OFFSET_6    (0x0060 | I2OVERSION)
 404 
 405  /* msg header defines for MsgFlags */
 406 #define MSG_STATIC      0x0100
 407 #define MSG_64BIT_CNTXT 0x0200
 408 #define MSG_MULTI_TRANS 0x1000
 409 #define MSG_FAIL        0x2000
 410 #define MSG_LAST        0x4000
 411 #define MSG_REPLY       0x8000
 412 
 413  /* minimum size msg */
 414 #define THREE_WORD_MSG_SIZE     0x00030000
 415 #define FOUR_WORD_MSG_SIZE      0x00040000
 416 #define FIVE_WORD_MSG_SIZE      0x00050000
 417 #define SIX_WORD_MSG_SIZE       0x00060000
 418 #define SEVEN_WORD_MSG_SIZE     0x00070000
 419 #define EIGHT_WORD_MSG_SIZE     0x00080000
 420 #define NINE_WORD_MSG_SIZE      0x00090000
 421 #define TEN_WORD_MSG_SIZE       0x000A0000
 422 #define I2O_MESSAGE_SIZE(x)     ((x)<<16)
 423 
 424 
 425 /* Special TID Assignments */
 426 
 427 #define ADAPTER_TID             0
 428 #define HOST_TID                1
 429 
 430 #define MSG_FRAME_SIZE          128
 431 #define NMBR_MSG_FRAMES         128
 432 
 433 #define MSG_POOL_SIZE           16384
 434 
 435 #define I2O_POST_WAIT_OK        0
 436 #define I2O_POST_WAIT_TIMEOUT   -ETIMEDOUT
 437 
 438 
 439 #endif /* __KERNEL__ */
 440 
 441 #endif /* _SCSI_I2O_H */

/* [<][>][^][v][top][bottom][index][help] */