root/drivers/crypto/nx/nx-842.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


DEFINITIONS

This source file includes following definitions.
  1. nx842_get_pa

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 
   3 #ifndef __NX_842_H__
   4 #define __NX_842_H__
   5 
   6 #include <linux/kernel.h>
   7 #include <linux/init.h>
   8 #include <linux/module.h>
   9 #include <linux/crypto.h>
  10 #include <linux/of.h>
  11 #include <linux/slab.h>
  12 #include <linux/io.h>
  13 #include <linux/mm.h>
  14 #include <linux/ratelimit.h>
  15 
  16 /* Restrictions on Data Descriptor List (DDL) and Entry (DDE) buffers
  17  *
  18  * From NX P8 workbook, sec 4.9.1 "842 details"
  19  *   Each DDE buffer is 128 byte aligned
  20  *   Each DDE buffer size is a multiple of 32 bytes (except the last)
  21  *   The last DDE buffer size is a multiple of 8 bytes
  22  */
  23 #define DDE_BUFFER_ALIGN        (128)
  24 #define DDE_BUFFER_SIZE_MULT    (32)
  25 #define DDE_BUFFER_LAST_MULT    (8)
  26 
  27 /* Arbitrary DDL length limit
  28  * Allows max buffer size of MAX-1 to MAX pages
  29  * (depending on alignment)
  30  */
  31 #define DDL_LEN_MAX             (17)
  32 
  33 /* CCW 842 CI/FC masks
  34  * NX P8 workbook, section 4.3.1, figure 4-6
  35  * "CI/FC Boundary by NX CT type"
  36  */
  37 #define CCW_CI_842              (0x00003ff8)
  38 #define CCW_FC_842              (0x00000007)
  39 
  40 /* CCW Function Codes (FC) for 842
  41  * NX P8 workbook, section 4.9, table 4-28
  42  * "Function Code Definitions for 842 Memory Compression"
  43  */
  44 #define CCW_FC_842_COMP_NOCRC   (0)
  45 #define CCW_FC_842_COMP_CRC     (1)
  46 #define CCW_FC_842_DECOMP_NOCRC (2)
  47 #define CCW_FC_842_DECOMP_CRC   (3)
  48 #define CCW_FC_842_MOVE         (4)
  49 
  50 /* CSB CC Error Types for 842
  51  * NX P8 workbook, section 4.10.3, table 4-30
  52  * "Reported Error Types Summary Table"
  53  */
  54 /* These are all duplicates of existing codes defined in icswx.h. */
  55 #define CSB_CC_TRANSLATION_DUP1 (80)
  56 #define CSB_CC_TRANSLATION_DUP2 (82)
  57 #define CSB_CC_TRANSLATION_DUP3 (84)
  58 #define CSB_CC_TRANSLATION_DUP4 (86)
  59 #define CSB_CC_TRANSLATION_DUP5 (92)
  60 #define CSB_CC_TRANSLATION_DUP6 (94)
  61 #define CSB_CC_PROTECTION_DUP1  (81)
  62 #define CSB_CC_PROTECTION_DUP2  (83)
  63 #define CSB_CC_PROTECTION_DUP3  (85)
  64 #define CSB_CC_PROTECTION_DUP4  (87)
  65 #define CSB_CC_PROTECTION_DUP5  (93)
  66 #define CSB_CC_PROTECTION_DUP6  (95)
  67 #define CSB_CC_RD_EXTERNAL_DUP1 (89)
  68 #define CSB_CC_RD_EXTERNAL_DUP2 (90)
  69 #define CSB_CC_RD_EXTERNAL_DUP3 (91)
  70 /* These are specific to NX */
  71 /* 842 codes */
  72 #define CSB_CC_TPBC_GT_SPBC     (64) /* no error, but >1 comp ratio */
  73 #define CSB_CC_CRC_MISMATCH     (65) /* decomp crc mismatch */
  74 #define CSB_CC_TEMPL_INVALID    (66) /* decomp invalid template value */
  75 #define CSB_CC_TEMPL_OVERFLOW   (67) /* decomp template shows data after end */
  76 /* sym crypt codes */
  77 #define CSB_CC_DECRYPT_OVERFLOW (64)
  78 /* asym crypt codes */
  79 #define CSB_CC_MINV_OVERFLOW    (128)
  80 /*
  81  * HW error - Job did not finish in the maximum time allowed.
  82  * Job terminated.
  83  */
  84 #define CSB_CC_HW_EXPIRED_TIMER         (224)
  85 /* These are reserved for hypervisor use */
  86 #define CSB_CC_HYP_RESERVE_START        (240)
  87 #define CSB_CC_HYP_RESERVE_END          (253)
  88 #define CSB_CC_HYP_RESERVE_P9_END       (251)
  89 /* No valid interrupt server (P9 or later). */
  90 #define CSB_CC_HYP_RESERVE_NO_INTR_SERVER       (252)
  91 #define CSB_CC_HYP_NO_HW                (254)
  92 #define CSB_CC_HYP_HANG_ABORTED         (255)
  93 
  94 /* CCB Completion Modes (CM) for 842
  95  * NX P8 workbook, section 4.3, figure 4-5
  96  * "CRB Details - Normal Cop_Req (CL=00, C=1)"
  97  */
  98 #define CCB_CM_EXTRA_WRITE      (CCB_CM0_ALL_COMPLETIONS & CCB_CM12_STORE)
  99 #define CCB_CM_INTERRUPT        (CCB_CM0_ALL_COMPLETIONS & CCB_CM12_INTERRUPT)
 100 
 101 #define LEN_ON_SIZE(pa, size)   ((size) - ((pa) & ((size) - 1)))
 102 #define LEN_ON_PAGE(pa)         LEN_ON_SIZE(pa, PAGE_SIZE)
 103 
 104 static inline unsigned long nx842_get_pa(void *addr)
 105 {
 106         if (!is_vmalloc_addr(addr))
 107                 return __pa(addr);
 108 
 109         return page_to_phys(vmalloc_to_page(addr)) + offset_in_page(addr);
 110 }
 111 
 112 /**
 113  * This provides the driver's constraints.  Different nx842 implementations
 114  * may have varying requirements.  The constraints are:
 115  *   @alignment:        All buffers should be aligned to this
 116  *   @multiple:         All buffer lengths should be a multiple of this
 117  *   @minimum:          Buffer lengths must not be less than this amount
 118  *   @maximum:          Buffer lengths must not be more than this amount
 119  *
 120  * The constraints apply to all buffers and lengths, both input and output,
 121  * for both compression and decompression, except for the minimum which
 122  * only applies to compression input and decompression output; the
 123  * compressed data can be less than the minimum constraint.  It can be
 124  * assumed that compressed data will always adhere to the multiple
 125  * constraint.
 126  *
 127  * The driver may succeed even if these constraints are violated;
 128  * however the driver can return failure or suffer reduced performance
 129  * if any constraint is not met.
 130  */
 131 struct nx842_constraints {
 132         int alignment;
 133         int multiple;
 134         int minimum;
 135         int maximum;
 136 };
 137 
 138 struct nx842_driver {
 139         char *name;
 140         struct module *owner;
 141         size_t workmem_size;
 142 
 143         struct nx842_constraints *constraints;
 144 
 145         int (*compress)(const unsigned char *in, unsigned int in_len,
 146                         unsigned char *out, unsigned int *out_len,
 147                         void *wrkmem);
 148         int (*decompress)(const unsigned char *in, unsigned int in_len,
 149                           unsigned char *out, unsigned int *out_len,
 150                           void *wrkmem);
 151 };
 152 
 153 struct nx842_crypto_header_group {
 154         __be16 padding;                 /* unused bytes at start of group */
 155         __be32 compressed_length;       /* compressed bytes in group */
 156         __be32 uncompressed_length;     /* bytes after decompression */
 157 } __packed;
 158 
 159 struct nx842_crypto_header {
 160         __be16 magic;           /* NX842_CRYPTO_MAGIC */
 161         __be16 ignore;          /* decompressed end bytes to ignore */
 162         u8 groups;              /* total groups in this header */
 163         struct nx842_crypto_header_group group[];
 164 } __packed;
 165 
 166 #define NX842_CRYPTO_GROUP_MAX  (0x20)
 167 
 168 struct nx842_crypto_ctx {
 169         spinlock_t lock;
 170 
 171         u8 *wmem;
 172         u8 *sbounce, *dbounce;
 173 
 174         struct nx842_crypto_header header;
 175         struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX];
 176 
 177         struct nx842_driver *driver;
 178 };
 179 
 180 int nx842_crypto_init(struct crypto_tfm *tfm, struct nx842_driver *driver);
 181 void nx842_crypto_exit(struct crypto_tfm *tfm);
 182 int nx842_crypto_compress(struct crypto_tfm *tfm,
 183                           const u8 *src, unsigned int slen,
 184                           u8 *dst, unsigned int *dlen);
 185 int nx842_crypto_decompress(struct crypto_tfm *tfm,
 186                             const u8 *src, unsigned int slen,
 187                             u8 *dst, unsigned int *dlen);
 188 
 189 #endif /* __NX_842_H__ */

/* [<][>][^][v][top][bottom][index][help] */