root/include/linux/mtd/hyperbus.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 /* SPDX-License-Identifier: GPL-2.0
   2  *
   3  * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
   4  */
   5 
   6 #ifndef __LINUX_MTD_HYPERBUS_H__
   7 #define __LINUX_MTD_HYPERBUS_H__
   8 
   9 #include <linux/mtd/map.h>
  10 
  11 enum hyperbus_memtype {
  12         HYPERFLASH,
  13         HYPERRAM,
  14 };
  15 
  16 /**
  17  * struct hyperbus_device - struct representing HyperBus slave device
  18  * @map: map_info struct for accessing MMIO HyperBus flash memory
  19  * @np: pointer to HyperBus slave device node
  20  * @mtd: pointer to MTD struct
  21  * @ctlr: pointer to HyperBus controller struct
  22  * @memtype: type of memory device: HyperFlash or HyperRAM
  23  */
  24 
  25 struct hyperbus_device {
  26         struct map_info map;
  27         struct device_node *np;
  28         struct mtd_info *mtd;
  29         struct hyperbus_ctlr *ctlr;
  30         enum hyperbus_memtype memtype;
  31 };
  32 
  33 /**
  34  * struct hyperbus_ops - struct representing custom HyperBus operations
  35  * @read16: read 16 bit of data from flash in a single burst. Used to read
  36  *          from non default address space, such as ID/CFI space
  37  * @write16: write 16 bit of data to flash in a single burst. Used to
  38  *           send cmd to flash or write single 16 bit word at a time.
  39  * @copy_from: copy data from flash memory
  40  * @copy_to: copy data to flash memory
  41  * @calibrate: calibrate HyperBus controller
  42  */
  43 
  44 struct hyperbus_ops {
  45         u16 (*read16)(struct hyperbus_device *hbdev, unsigned long addr);
  46         void (*write16)(struct hyperbus_device *hbdev,
  47                         unsigned long addr, u16 val);
  48         void (*copy_from)(struct hyperbus_device *hbdev, void *to,
  49                           unsigned long from, ssize_t len);
  50         void (*copy_to)(struct hyperbus_device *dev, unsigned long to,
  51                         const void *from, ssize_t len);
  52         int (*calibrate)(struct hyperbus_device *dev);
  53 };
  54 
  55 /**
  56  * struct hyperbus_ctlr - struct representing HyperBus controller
  57  * @dev: pointer to HyperBus controller device
  58  * @calibrated: flag to indicate ctlr calibration sequence is complete
  59  * @ops: HyperBus controller ops
  60  */
  61 struct hyperbus_ctlr {
  62         struct device *dev;
  63         bool calibrated;
  64 
  65         const struct hyperbus_ops *ops;
  66 };
  67 
  68 /**
  69  * hyperbus_register_device - probe and register a HyperBus slave memory device
  70  * @hbdev: hyperbus_device struct with dev, np and ctlr field populated
  71  *
  72  * Return: 0 for success, others for failure.
  73  */
  74 int hyperbus_register_device(struct hyperbus_device *hbdev);
  75 
  76 /**
  77  * hyperbus_unregister_device - deregister HyperBus slave memory device
  78  * @hbdev: hyperbus_device to be unregistered
  79  *
  80  * Return: 0 for success, others for failure.
  81  */
  82 int hyperbus_unregister_device(struct hyperbus_device *hbdev);
  83 
  84 #endif /* __LINUX_MTD_HYPERBUS_H__ */

/* [<][>][^][v][top][bottom][index][help] */