root/include/linux/cb710.h

INCLUDED FROM

DEFINITIONS

1. CB710_PORT_ACCESSORS
2. cb710_slot_to_chip
3. cb710_slot_dev
4. cb710_chip_dev
5. cb710_sg_dwiter_write_from_io
6. cb710_sg_dwiter_read_to_io

   1 /* SPDX-License-Identifier: GPL-2.0-only */
   2 /*
   3  *  cb710/cb710.h
   4  *
   5  *  Copyright by Michał Mirosław, 2008-2009
   6  */
   7 #ifndef LINUX_CB710_DRIVER_H
   8 #define LINUX_CB710_DRIVER_H
   9 
  10 #include <linux/io.h>
  11 #include <linux/interrupt.h>
  12 #include <linux/spinlock.h>
  13 #include <linux/pci.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/mmc/host.h>
  16 
  17 struct cb710_slot;
  18 
  19 typedef int (*cb710_irq_handler_t)(struct cb710_slot *);
  20 
  21 /* per-virtual-slot structure */
  22 struct cb710_slot {
  23         struct platform_device  pdev;
  24         void __iomem            *iobase;
  25         cb710_irq_handler_t     irq_handler;
  26 };
  27 
  28 /* per-device structure */
  29 struct cb710_chip {
  30         struct pci_dev          *pdev;
  31         void __iomem            *iobase;
  32         unsigned                platform_id;
  33 #ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
  34         atomic_t                slot_refs_count;
  35 #endif
  36         unsigned                slot_mask;
  37         unsigned                slots;
  38         spinlock_t              irq_lock;
  39         struct cb710_slot       slot[0];
  40 };
  41 
  42 /* NOTE: cb710_chip.slots is modified only during device init/exit and
  43  * they are all serialized wrt themselves */
  44 
  45 /* cb710_chip.slot_mask values */
  46 #define CB710_SLOT_MMC          1
  47 #define CB710_SLOT_MS           2
  48 #define CB710_SLOT_SM           4
  49 
  50 /* slot port accessors - so the logic is more clear in the code */
  51 #define CB710_PORT_ACCESSORS(t) \
  52 static inline void cb710_write_port_##t(struct cb710_slot *slot,        \
  53         unsigned port, u##t value)                                      \
  54 {                                                                       \
  55         iowrite##t(value, slot->iobase + port);                         \
  56 }                                                                       \
  57                                                                         \
  58 static inline u##t cb710_read_port_##t(struct cb710_slot *slot,         \
  59         unsigned port)                                                  \
  60 {                                                                       \
  61         return ioread##t(slot->iobase + port);                          \
  62 }                                                                       \
  63                                                                         \
  64 static inline void cb710_modify_port_##t(struct cb710_slot *slot,       \
  65         unsigned port, u##t set, u##t clear)                            \
  66 {                                                                       \
  67         iowrite##t(                                                     \
  68                 (ioread##t(slot->iobase + port) & ~clear)|set,          \
  69                 slot->iobase + port);                                   \
  70 }
  71 
  72 CB710_PORT_ACCESSORS(8)
  73 CB710_PORT_ACCESSORS(16)
  74 CB710_PORT_ACCESSORS(32)
  75 
  76 void cb710_pci_update_config_reg(struct pci_dev *pdev,
  77         int reg, uint32_t and, uint32_t xor);
  78 void cb710_set_irq_handler(struct cb710_slot *slot,
  79         cb710_irq_handler_t handler);
  80 
  81 /* some device struct walking */
  82 
  83 static inline struct cb710_slot *cb710_pdev_to_slot(
  84         struct platform_device *pdev)
  85 {
  86         return container_of(pdev, struct cb710_slot, pdev);
  87 }
  88 
  89 static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot)
  90 {
  91         return dev_get_drvdata(slot->pdev.dev.parent);
  92 }
  93 
  94 static inline struct device *cb710_slot_dev(struct cb710_slot *slot)
  95 {
  96         return &slot->pdev.dev;
  97 }
  98 
  99 static inline struct device *cb710_chip_dev(struct cb710_chip *chip)
 100 {
 101         return &chip->pdev->dev;
 102 }
 103 
 104 /* debugging aids */
 105 
 106 #ifdef CONFIG_CB710_DEBUG
 107 void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
 108 #else
 109 #define cb710_dump_regs(c, d) do {} while (0)
 110 #endif
 111 
 112 #define CB710_DUMP_REGS_MMC     0x0F
 113 #define CB710_DUMP_REGS_MS      0x30
 114 #define CB710_DUMP_REGS_SM      0xC0
 115 #define CB710_DUMP_REGS_ALL     0xFF
 116 #define CB710_DUMP_REGS_MASK    0xFF
 117 
 118 #define CB710_DUMP_ACCESS_8     0x100
 119 #define CB710_DUMP_ACCESS_16    0x200
 120 #define CB710_DUMP_ACCESS_32    0x400
 121 #define CB710_DUMP_ACCESS_ALL   0x700
 122 #define CB710_DUMP_ACCESS_MASK  0x700
 123 
 124 #endif /* LINUX_CB710_DRIVER_H */
 125 /*
 126  *  cb710/sgbuf2.h
 127  *
 128  *  Copyright by Michał Mirosław, 2008-2009
 129  */
 130 #ifndef LINUX_CB710_SG_H
 131 #define LINUX_CB710_SG_H
 132 
 133 #include <linux/highmem.h>
 134 #include <linux/scatterlist.h>
 135 
 136 /*
 137  * 32-bit PIO mapping sg iterator
 138  *
 139  * Hides scatterlist access issues - fragment boundaries, alignment, page
 140  * mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices
 141  * without DMA support).
 142  *
 143  * Best-case reading (transfer from device):
 144  *   sg_miter_start(, SG_MITER_TO_SG);
 145  *   cb710_sg_dwiter_write_from_io();
 146  *   sg_miter_stop();
 147  *
 148  * Best-case writing (transfer to device):
 149  *   sg_miter_start(, SG_MITER_FROM_SG);
 150  *   cb710_sg_dwiter_read_to_io();
 151  *   sg_miter_stop();
 152  */
 153 
 154 uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter);
 155 void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data);
 156 
 157 /**
 158  * cb710_sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port
 159  * @miter: sg mapping iter
 160  * @port: PIO port - IO or MMIO address
 161  * @count: number of 32-bit words to transfer
 162  *
 163  * Description:
 164  *   Reads @count 32-bit words from register @port and stores it in
 165  *   buffer iterated by @miter.  Data that would overflow the buffer
 166  *   is silently ignored.  Iterator is advanced by 4*@count bytes
 167  *   or to the buffer's end whichever is closer.
 168  *
 169  * Context:
 170  *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
 171  */
 172 static inline void cb710_sg_dwiter_write_from_io(struct sg_mapping_iter *miter,
 173         void __iomem *port, size_t count)
 174 {
 175         while (count-- > 0)
 176                 cb710_sg_dwiter_write_next_block(miter, ioread32(port));
 177 }
 178 
 179 /**
 180  * cb710_sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer
 181  * @miter: sg mapping iter
 182  * @port: PIO port - IO or MMIO address
 183  * @count: number of 32-bit words to transfer
 184  *
 185  * Description:
 186  *   Writes @count 32-bit words to register @port from buffer iterated
 187  *   through @miter.  If buffer ends before @count words are written
 188  *   missing data is replaced by zeroes. @miter is advanced by 4*@count
 189  *   bytes or to the buffer's end whichever is closer.
 190  *
 191  * Context:
 192  *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
 193  */
 194 static inline void cb710_sg_dwiter_read_to_io(struct sg_mapping_iter *miter,
 195         void __iomem *port, size_t count)
 196 {
 197         while (count-- > 0)
 198                 iowrite32(cb710_sg_dwiter_read_next_block(miter), port);
 199 }
 200 
 201 #endif /* LINUX_CB710_SG_H */