root/include/linux/mfd/stmpe.h

INCLUDED FROM

   1 /* SPDX-License-Identifier: GPL-2.0-only */
   2 /*
   3  * Copyright (C) ST-Ericsson SA 2010
   4  *
   5  * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
   6  */
   7 
   8 #ifndef __LINUX_MFD_STMPE_H
   9 #define __LINUX_MFD_STMPE_H
  10 
  11 #include <linux/mutex.h>
  12 
  13 #define STMPE_SAMPLE_TIME(x)    ((x & 0xf) << 4)
  14 #define STMPE_MOD_12B(x)        ((x & 0x1) << 3)
  15 #define STMPE_REF_SEL(x)        ((x & 0x1) << 1)
  16 #define STMPE_ADC_FREQ(x)       (x & 0x3)
  17 #define STMPE_AVE_CTRL(x)       ((x & 0x3) << 6)
  18 #define STMPE_DET_DELAY(x)      ((x & 0x7) << 3)
  19 #define STMPE_SETTLING(x)       (x & 0x7)
  20 #define STMPE_FRACTION_Z(x)     (x & 0x7)
  21 #define STMPE_I_DRIVE(x)        (x & 0x1)
  22 #define STMPE_OP_MODE(x)        ((x & 0x7) << 1)
  23 
  24 #define STMPE811_REG_ADC_CTRL1  0x20
  25 #define STMPE811_REG_ADC_CTRL2  0x21
  26 
  27 struct device;
  28 struct regulator;
  29 
  30 enum stmpe_block {
  31         STMPE_BLOCK_GPIO        = 1 << 0,
  32         STMPE_BLOCK_KEYPAD      = 1 << 1,
  33         STMPE_BLOCK_TOUCHSCREEN = 1 << 2,
  34         STMPE_BLOCK_ADC         = 1 << 3,
  35         STMPE_BLOCK_PWM         = 1 << 4,
  36         STMPE_BLOCK_ROTATOR     = 1 << 5,
  37 };
  38 
  39 enum stmpe_partnum {
  40         STMPE610,
  41         STMPE801,
  42         STMPE811,
  43         STMPE1600,
  44         STMPE1601,
  45         STMPE1801,
  46         STMPE2401,
  47         STMPE2403,
  48         STMPE_NBR_PARTS
  49 };
  50 
  51 /*
  52  * For registers whose locations differ on variants,  the correct address is
  53  * obtained by indexing stmpe->regs with one of the following.
  54  */
  55 enum {
  56         STMPE_IDX_CHIP_ID,
  57         STMPE_IDX_SYS_CTRL,
  58         STMPE_IDX_SYS_CTRL2,
  59         STMPE_IDX_ICR_LSB,
  60         STMPE_IDX_IER_LSB,
  61         STMPE_IDX_IER_MSB,
  62         STMPE_IDX_ISR_LSB,
  63         STMPE_IDX_ISR_MSB,
  64         STMPE_IDX_GPMR_LSB,
  65         STMPE_IDX_GPMR_CSB,
  66         STMPE_IDX_GPMR_MSB,
  67         STMPE_IDX_GPSR_LSB,
  68         STMPE_IDX_GPSR_CSB,
  69         STMPE_IDX_GPSR_MSB,
  70         STMPE_IDX_GPCR_LSB,
  71         STMPE_IDX_GPCR_CSB,
  72         STMPE_IDX_GPCR_MSB,
  73         STMPE_IDX_GPDR_LSB,
  74         STMPE_IDX_GPDR_CSB,
  75         STMPE_IDX_GPDR_MSB,
  76         STMPE_IDX_GPEDR_LSB,
  77         STMPE_IDX_GPEDR_CSB,
  78         STMPE_IDX_GPEDR_MSB,
  79         STMPE_IDX_GPRER_LSB,
  80         STMPE_IDX_GPRER_CSB,
  81         STMPE_IDX_GPRER_MSB,
  82         STMPE_IDX_GPFER_LSB,
  83         STMPE_IDX_GPFER_CSB,
  84         STMPE_IDX_GPFER_MSB,
  85         STMPE_IDX_GPPUR_LSB,
  86         STMPE_IDX_GPPDR_LSB,
  87         STMPE_IDX_GPAFR_U_MSB,
  88         STMPE_IDX_IEGPIOR_LSB,
  89         STMPE_IDX_IEGPIOR_CSB,
  90         STMPE_IDX_IEGPIOR_MSB,
  91         STMPE_IDX_ISGPIOR_LSB,
  92         STMPE_IDX_ISGPIOR_CSB,
  93         STMPE_IDX_ISGPIOR_MSB,
  94         STMPE_IDX_MAX,
  95 };
  96 
  97 
  98 struct stmpe_variant_info;
  99 struct stmpe_client_info;
 100 struct stmpe_platform_data;
 101 
 102 /**
 103  * struct stmpe - STMPE MFD structure
 104  * @vcc: optional VCC regulator
 105  * @vio: optional VIO regulator
 106  * @lock: lock protecting I/O operations
 107  * @irq_lock: IRQ bus lock
 108  * @dev: device, mostly for dev_dbg()
 109  * @irq_domain: IRQ domain
 110  * @client: client - i2c or spi
 111  * @ci: client specific information
 112  * @partnum: part number
 113  * @variant: the detected STMPE model number
 114  * @regs: list of addresses of registers which are at different addresses on
 115  *        different variants.  Indexed by one of STMPE_IDX_*.
 116  * @irq: irq number for stmpe
 117  * @num_gpios: number of gpios, differs for variants
 118  * @ier: cache of IER registers for bus_lock
 119  * @oldier: cache of IER registers for bus_lock
 120  * @pdata: platform data
 121  */
 122 struct stmpe {
 123         struct regulator *vcc;
 124         struct regulator *vio;
 125         struct mutex lock;
 126         struct mutex irq_lock;
 127         struct device *dev;
 128         struct irq_domain *domain;
 129         void *client;
 130         struct stmpe_client_info *ci;
 131         enum stmpe_partnum partnum;
 132         struct stmpe_variant_info *variant;
 133         const u8 *regs;
 134 
 135         int irq;
 136         int num_gpios;
 137         u8 ier[2];
 138         u8 oldier[2];
 139         struct stmpe_platform_data *pdata;
 140 
 141         /* For devices that use an ADC */
 142         u8 sample_time;
 143         u8 mod_12b;
 144         u8 ref_sel;
 145         u8 adc_freq;
 146 };
 147 
 148 extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data);
 149 extern int stmpe_reg_read(struct stmpe *stmpe, u8 reg);
 150 extern int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
 151                             u8 *values);
 152 extern int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
 153                              const u8 *values);
 154 extern int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val);
 155 extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins,
 156                              enum stmpe_block block);
 157 extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
 158 extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
 159 extern int stmpe811_adc_common_init(struct stmpe *stmpe);
 160 
 161 #define STMPE_GPIO_NOREQ_811_TOUCH      (0xf0)
 162 
 163 #endif