1 /*****************************************************************************
2 * *
3 * Copyright (c) David L. Mills 1993 *
4 * *
5 * Permission to use, copy, modify, and distribute this software and its *
6 * documentation for any purpose and without fee is hereby granted, provided *
7 * that the above copyright notice appears in all copies and that both the *
8 * copyright notice and this permission notice appear in supporting *
9 * documentation, and that the name University of Delaware not be used in *
10 * advertising or publicity pertaining to distribution of the software *
11 * without specific, written prior permission. The University of Delaware *
12 * makes no representations about the suitability this software for any *
13 * purpose. It is provided "as is" without express or implied warranty. *
14 * *
15 *****************************************************************************/
16
17 /*
18 * Modification history timex.h
19 *
20 * 29 Dec 97 Russell King
21 * Moved CLOCK_TICK_RATE, CLOCK_TICK_FACTOR and FINETUNE to asm/timex.h
22 * for ARM machines
23 *
24 * 9 Jan 97 Adrian Sun
25 * Shifted LATCH define to allow access to alpha machines.
26 *
27 * 26 Sep 94 David L. Mills
28 * Added defines for hybrid phase/frequency-lock loop.
29 *
30 * 19 Mar 94 David L. Mills
31 * Moved defines from kernel routines to header file and added new
32 * defines for PPS phase-lock loop.
33 *
34 * 20 Feb 94 David L. Mills
35 * Revised status codes and structures for external clock and PPS
36 * signal discipline.
37 *
38 * 28 Nov 93 David L. Mills
39 * Adjusted parameters to improve stability and increase poll
40 * interval.
41 *
42 * 17 Sep 93 David L. Mills
43 * Created file $NTP/include/sys/timex.h
44 * 07 Oct 93 Torsten Duwe
45 * Derived linux/timex.h
46 * 1995-08-13 Torsten Duwe
47 * kernel PLL updated to 1994-12-13 specs (rfc-1589)
48 * 1997-08-30 Ulrich Windl
49 * Added new constant NTP_PHASE_LIMIT
50 * 2004-08-12 Christoph Lameter
51 * Reworked time interpolation logic
52 */
53 #ifndef _UAPI_LINUX_TIMEX_H
54 #define _UAPI_LINUX_TIMEX_H
55
56 #include <linux/time.h>
57
58 #define NTP_API 4 /* NTP API version */
59
60 /*
61 * syscall interface - used (mainly by NTP daemon)
62 * to discipline kernel clock oscillator
63 */
64 struct timex {
65 unsigned int modes; /* mode selector */
66 __kernel_long_t offset; /* time offset (usec) */
67 __kernel_long_t freq; /* frequency offset (scaled ppm) */
68 __kernel_long_t maxerror;/* maximum error (usec) */
69 __kernel_long_t esterror;/* estimated error (usec) */
70 int status; /* clock command/status */
71 __kernel_long_t constant;/* pll time constant */
72 __kernel_long_t precision;/* clock precision (usec) (read only) */
73 __kernel_long_t tolerance;/* clock frequency tolerance (ppm)
74 * (read only)
75 */
76 struct timeval time; /* (read only, except for ADJ_SETOFFSET) */
77 __kernel_long_t tick; /* (modified) usecs between clock ticks */
78
79 __kernel_long_t ppsfreq;/* pps frequency (scaled ppm) (ro) */
80 __kernel_long_t jitter; /* pps jitter (us) (ro) */
81 int shift; /* interval duration (s) (shift) (ro) */
82 __kernel_long_t stabil; /* pps stability (scaled ppm) (ro) */
83 __kernel_long_t jitcnt; /* jitter limit exceeded (ro) */
84 __kernel_long_t calcnt; /* calibration intervals (ro) */
85 __kernel_long_t errcnt; /* calibration errors (ro) */
86 __kernel_long_t stbcnt; /* stability limit exceeded (ro) */
87
88 int tai; /* TAI offset (ro) */
89
90 int :32; int :32; int :32; int :32;
91 int :32; int :32; int :32; int :32;
92 int :32; int :32; int :32;
93 };
94
95 struct __kernel_timex_timeval {
96 __kernel_time64_t tv_sec;
97 long long tv_usec;
98 };
99
100 struct __kernel_timex {
101 unsigned int modes; /* mode selector */
102 int :32; /* pad */
103 long long offset; /* time offset (usec) */
104 long long freq; /* frequency offset (scaled ppm) */
105 long long maxerror;/* maximum error (usec) */
106 long long esterror;/* estimated error (usec) */
107 int status; /* clock command/status */
108 int :32; /* pad */
109 long long constant;/* pll time constant */
110 long long precision;/* clock precision (usec) (read only) */
111 long long tolerance;/* clock frequency tolerance (ppm)
112 * (read only)
113 */
114 struct __kernel_timex_timeval time; /* (read only, except for ADJ_SETOFFSET) */
115 long long tick; /* (modified) usecs between clock ticks */
116
117 long long ppsfreq;/* pps frequency (scaled ppm) (ro) */
118 long long jitter; /* pps jitter (us) (ro) */
119 int shift; /* interval duration (s) (shift) (ro) */
120 int :32; /* pad */
121 long long stabil; /* pps stability (scaled ppm) (ro) */
122 long long jitcnt; /* jitter limit exceeded (ro) */
123 long long calcnt; /* calibration intervals (ro) */
124 long long errcnt; /* calibration errors (ro) */
125 long long stbcnt; /* stability limit exceeded (ro) */
126
127 int tai; /* TAI offset (ro) */
128
129 int :32; int :32; int :32; int :32;
130 int :32; int :32; int :32; int :32;
131 int :32; int :32; int :32;
132 };
133
134 /*
135 * Mode codes (timex.mode)
136 */
137 #define ADJ_OFFSET 0x0001 /* time offset */
138 #define ADJ_FREQUENCY 0x0002 /* frequency offset */
139 #define ADJ_MAXERROR 0x0004 /* maximum time error */
140 #define ADJ_ESTERROR 0x0008 /* estimated time error */
141 #define ADJ_STATUS 0x0010 /* clock status */
142 #define ADJ_TIMECONST 0x0020 /* pll time constant */
143 #define ADJ_TAI 0x0080 /* set TAI offset */
144 #define ADJ_SETOFFSET 0x0100 /* add 'time' to current time */
145 #define ADJ_MICRO 0x1000 /* select microsecond resolution */
146 #define ADJ_NANO 0x2000 /* select nanosecond resolution */
147 #define ADJ_TICK 0x4000 /* tick value */
148
149 #ifndef __KERNEL__
150 #define ADJ_OFFSET_SINGLESHOT 0x8001 /* old-fashioned adjtime */
151 #define ADJ_OFFSET_SS_READ 0xa001 /* read-only adjtime */
152 #endif
153
154 /* NTP userland likes the MOD_ prefix better */
155 #define MOD_OFFSET ADJ_OFFSET
156 #define MOD_FREQUENCY ADJ_FREQUENCY
157 #define MOD_MAXERROR ADJ_MAXERROR
158 #define MOD_ESTERROR ADJ_ESTERROR
159 #define MOD_STATUS ADJ_STATUS
160 #define MOD_TIMECONST ADJ_TIMECONST
161 #define MOD_TAI ADJ_TAI
162 #define MOD_MICRO ADJ_MICRO
163 #define MOD_NANO ADJ_NANO
164
165
166 /*
167 * Status codes (timex.status)
168 */
169 #define STA_PLL 0x0001 /* enable PLL updates (rw) */
170 #define STA_PPSFREQ 0x0002 /* enable PPS freq discipline (rw) */
171 #define STA_PPSTIME 0x0004 /* enable PPS time discipline (rw) */
172 #define STA_FLL 0x0008 /* select frequency-lock mode (rw) */
173
174 #define STA_INS 0x0010 /* insert leap (rw) */
175 #define STA_DEL 0x0020 /* delete leap (rw) */
176 #define STA_UNSYNC 0x0040 /* clock unsynchronized (rw) */
177 #define STA_FREQHOLD 0x0080 /* hold frequency (rw) */
178
179 #define STA_PPSSIGNAL 0x0100 /* PPS signal present (ro) */
180 #define STA_PPSJITTER 0x0200 /* PPS signal jitter exceeded (ro) */
181 #define STA_PPSWANDER 0x0400 /* PPS signal wander exceeded (ro) */
182 #define STA_PPSERROR 0x0800 /* PPS signal calibration error (ro) */
183
184 #define STA_CLOCKERR 0x1000 /* clock hardware fault (ro) */
185 #define STA_NANO 0x2000 /* resolution (0 = us, 1 = ns) (ro) */
186 #define STA_MODE 0x4000 /* mode (0 = PLL, 1 = FLL) (ro) */
187 #define STA_CLK 0x8000 /* clock source (0 = A, 1 = B) (ro) */
188
189 /* read-only bits */
190 #define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
191 STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
192
193 /*
194 * Clock states (time_state)
195 */
196 #define TIME_OK 0 /* clock synchronized, no leap second */
197 #define TIME_INS 1 /* insert leap second */
198 #define TIME_DEL 2 /* delete leap second */
199 #define TIME_OOP 3 /* leap second in progress */
200 #define TIME_WAIT 4 /* leap second has occurred */
201 #define TIME_ERROR 5 /* clock not synchronized */
202 #define TIME_BAD TIME_ERROR /* bw compat */
203
204
205 #endif /* _UAPI_LINUX_TIMEX_H */