Lines Matching refs:panic

81 If you want the driver to put an event into the event log on a panic,
82 enable the 'Generate a panic event to all BMCs on a panic' option.  If
83 you want the whole panic string put into the event log using OEM
84 events, enable the 'Generate OEM events containing the panic string'
543 this driver cannod to IPMI panic events, extend the watchdog at panic
544 time, or other panic-related IPMI functions without special kernel
596 is the amount of seconds before the reset that the pre-timeout panic will
612 "preop_panic" to set the preoperation to panic, or "preop_give_data"
640 The watchdog will panic and start a 120 second reset timeout if it
641 gets a pre-action.  During a panic or a reboot, the watchdog will
647 otherwise unhandled NMI, it must be from IPMI and it will panic
660 events in the system event log if a panic occurs.  if you enable the
661 'Generate a panic event to all BMCs on a panic' option, you will get
662 one event on a panic in a standard IPMI event format.  If you enable
663 the 'Generate OEM events containing the panic string' option, you will
664 also get a bunch of OEM events holding the panic string.
671 * Sensor #: The first byte of the panic string (0 if no panic string)
674 * Event data 2: second byte of panic string
675 * Event data 3: third byte of panic string
683 byte 3: The slave address of the card saving the panic
685 The rest of the bytes (11 bytes) are the panic string.  If the panic string