Lines Matching refs:be

10 - compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
12 - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
26   - #clock-cells: should be 1.
37   - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
40 - regulators: The regulators of s2mps11 that have to be instantiated should be
42 sub-node should be of the format as listed below.
51  regulator-ramp-delay = <0> can be used for them to disable ramp delay.
53  delay will be used.
55 NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
60 On S2MPS14 the LDO10, LDO11 and LDO12 can be configured to external control
61 over GPIO. To turn this feature on this property must be added to the regulator