Lines Matching refs:interrupt

8 - interrupt-parent: Should be the phandle for the interrupt controller
10 - interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt
11   listed is required and is the general device interrupt. If the optional
12   amd,per-channel-interrupt property is specified, then one additional
13   interrupt for each DMA channel supported by the device should be specified
16      correct Rx interrupt watchdog timer value on a DMA channel
29 - amd,per-channel-interrupt: Indicates that Rx and Tx complete will generate
30   a unique interrupt for each DMA channel - this requires an additional
31   interrupt be configured for each DMA channel
38 		interrupt-parent = <&gic>;
41 		amd,per-channel-interrupt;