Lines Matching refs:used

15 - thermal sensors: devices which may be used to take temperature
17 - cooling devices: devices which may be used to dissipate heat.
20 - cooling maps: used to describe links between trip points and cooling devices;
21 - thermal zones: used to describe thermal data within the hardware;
73   Size: one cell      	to specify minimum and maximum cooling state used
110   Type: phandle +	referring to which cooling device is used in this
113 			is the maximum cooling state used in this map.
126 (i)   - minimum state allowed for minimum cooling state used in the reference.
127 (ii)  - maximum state allowed for maximum cooling state used in the reference.
147   Type: list of 	used while monitoring the thermal zone.
155   Type: sub-node	map nodes, used to describe the relation between trips
163 			is not specified. A simple linear polynomial is used:
207 	 * used as OPP indexes. The minimum cooling state is 0, which means
297 used to monitor the zone 'cpu-thermal' using its sole sensor. A fan
299 different cooling states 0-9. It is used to remove the heat out of
302 at 90C, as an example of active cooling. The same cooling device is used at
423 specifier as sensor ID. In the example, then, <bandgap 0> is used to
424 monitor CPU thermal zone, <bandgap 1> is used to monitor GPU thermal
425 zone and <bandgap 2> is used to monitor DSP thermal zone. Each zone
483 close to CPU hotspot and together with internal CPU sensor, it is used
488 In other context, the same idea can be used to add fixed offset. For instance,
594 sensors used to monitor different zones, one of them is composed by several sensors and