Lines Matching refs:which
11 not about how the system must control or which algorithm or policy
15 - thermal sensors: devices which may be used to take temperature
17 - cooling devices: devices which may be used to dissipate heat.
18 - trip points: describe key temperatures at which cooling is recommended. The
45 is by means of regulating device performance, which is known as passive
49 the dissipated heat, which is known as active cooling, e.g. regulating
51 the state of cooling in which the device is.
83 in which the system takes an action. This node describes just the point,
110 Type: phandle + referring to which cooling device is used in this
151 - trips: A sub-node which is a container of only trip point nodes
154 - cooling-maps: A sub-node which is a container of only cooling device
207 * used as OPP indexes. The minimum cooling state is 0, which means
209 * cooling state is 3, which means only the lowest OPPs (198MHz@0.85V)
231 * A simple fan controller which supports 10 speeds of operation
306 which is a trip point at 100C. On the thermal zone 'cpu-thermal', at the
414 In the example above, there is one bandgap IC which has the capability to