Lines Matching refs:this

21 "bluesmoke" was the name for this device driver when it was "out-of-tree"
75 to generate parity.  Some vendors do not do this, and thus the parity bit
140 Within this directory there currently reside 2 'edac' components:
183 labeled 'A' are channel 0 in this example. Slots labeled 'B'
223 both csrow2 and csrow3 are populated, this indicates a dual ranked
235 this 'X' instance of the memory controllers.
245 csrowX directories. As this API doesn't work properly for Rambus, FB-DIMMs
246 and modern Intel Memory Controllers, this is being deprecated in favor
250 this 'X' instance of csrow:
258 	errors that have occurred on this csrow. If panic_on_ue is set
259 	this counter will not have a chance to increment, since EDAC
268 	errors that have occurred on this csrow. This
275 Total memory managed by this csrow attribute file:
280 	that this csrow contains.
288 	on this csrow. Normally, either buffered or unbuffered memory.
307 	being utilized on this DIMM.
319 	This attribute file will display the count of CEs on this
327 	This attribute file will display the count of UEs on this
335 	This control file allows this DIMM to have a label assigned
336 	to it. With this label in the module, when errors occur
344 	motherboard specific and determination of this information
345 	must occur in userland at this time.
352 	This attribute file will display the count of CEs on this
360 	This attribute file will display the count of UEs on this
368 	This control file allows this DIMM to have a label assigned
369 	to it. With this label in the module, when errors occur
377 	motherboard specific and determination of this information
378 	must occur in userland at this time.
435 	operation. Writing a 1 to this file enables the scanning. Writing
436 	a 0 to this file disables the scanning.
507 	increase this.
552 in this directory are various controls, a symlink and one or more 'instance'
573 The symlink points to the 'struct dev' that is registered for this edac_device.
582 In this directory there are two default counter attributes, which are totals of
596 In this directory the default attributes are:
598 	ce_count	which is counter of CE events for this 'block'
600 	ue_count	which is counter of UE events for this 'block'
606 	test-block-bits-0	for every POLL cycle this counter
608 	test-block-bits-1	every 10 cycles, this counter is bumped once,
610 	test-block-bits-2	every 100 cycles, this counter is bumped once,
612 	test-block-bits-3	every 1000 cycles, this counter is bumped once,
616 	reset-counters		writing ANY thing to this control will
667 2) Nehalem MC has the hability to generate errors. The driver implements this
758    So, in this memory mapping:
773    by the driver. Since, with udimm, this is counted by software, it is