Lines Matching refs:vesa
25 Switching modes is done using the video=matroxfb:vesa:... boot parameter
29 pass to the kernel this command line: "video=matroxfb:vesa:0x1BB".
36 Currently supported video modes are (through vesa:... interface, PowerMac
76 example 1600x1200x32bpp can be specified by `video=matroxfb:vesa:0x11C,depth:32'.
231 vesa:X - selects startup videomode. X is number from 0 to 0x1FF, see table
237 If you are not satisfied with videomode selected by `vesa' option, you
240 xres:X - horizontal resolution, in pixels. Default is derived from `vesa'
242 yres:X - vertical resolution, in pixel lines. Default is derived from `vesa'
245 pixel line of picture. Default is derived from `vesa' option.
247 pulse. Default is derived from `vesa' option.
248 vslen:X - length of VSYNC pulse, in lines. Default is derived from `vesa'
251 Default is derived from `vesa' option.
253 pulse. Default is derived from `vesa' option.
254 hslen:X - length of HSYNC pulse, in pixels. Default is derived from `vesa'
256 pixclock:X - dotclocks, in ps (picoseconds). Default is derived from `vesa'
263 Default depends on `vesa'.
265 `vesa'.
276 70 for modes derived from `vesa' with yres <= 400, 60Hz for