Lines Matching refs:You

240 You will need to create a table of the components of the volume/stripe set and
248 Device-Mapper driver does not support raid level 5.  You may be able to use the
273 writing is linux-ldm-0.0.8.tar.bz2).  You can download it from:
276 into it (cd linux-ldm-0.0.8) and change to the test directory (cd test).  You
277 will find the precompiled (i386) ldminfo utility there.  NOTE: You will not be
286 VOLUME DEFINITIONS section which is all you really need.  You may need to look
290 section).  You can then find these Disk Ids in the VBLK DATABASE section in the
296 enabled.  This will create the LDM partitions on each device at boot time.  You
300 You can also bypass using the LDM driver by using the main device (e.g.
360 You can obviously replace "myvolume1" with whatever name you like.
368 (You need to create the directory /mnt/myvol1 first and of course you can use
390 You have to use the "persistent-superblock 0" option for each raid-disk in the
448 number of sectors BEFORE attempting to use it.  You have been warned!