Lines Matching refs:files
73 sysfs files prochot1, prochot2, prochot1_avg, prochot2_avg, prochot1_max,
83 These intervals can be found in the sysfs files prochot1_interval and
84 prochot2_interval. The values in these files specify the intervals for
101 The sysfs files prochot1_override and prochot2_override contain boolean
111 sysfs files vrdhot1 and vrdhot2. There is one value per file: a boolean for
113 files are read-only.
134 15.10.6 of the datasheet for details.) The sysfs files pwm1_override
136 where 0 disables and 1 enables the manual control mode. The sysfs files pwm1
147 The sysfs files pwm1_freq and pwm2_freq are used to select the frequency. The
163 in the sysfs files pwm<n>_auto_channels, where a "1" enables the binding, and
178 sysfs files temp<n>_auto_base. The offsets are expressed in cumulative
207 the sysfs files temp<n>_auto_offset_hyst. The value in this file has the
211 will use the minimum PWM value. These values are found in the sysfs files
220 values are found in the sysfs files pwm<n>_auto_spinup_min. The value in this
223 the sysfs files pwm<n>_auto_spinup_time. The value in this file is
235 steps. The duration of each step is configurable. There are two files, with
246 This limit is expressed in degrees C in the sysfs files temp<n>_auto_boost.
250 C in the sysfs files temp<n>_auto_boost_hyst.