Lines Matching refs:speed
50 There are 4 to 5 fan rotation speed sensors, 8 to 15 analog voltage sensors,
64 triggered if the rotation speed has dropped below a programmable limit. On
67 do not have a fan speed divider. The driver sets the most suitable fan divisor
68 itself; specifically, it increases the divider value each time a fan speed
69 reading returns an invalid value, and it reduces it if the fan speed reading
87 pwm[1-5] - this file stores PWM duty cycle or DC value (fan speed) in range:
88 0 (lowest speed) to 255 (full)
91 * 0 Fan control disabled (fans set to maximum speed)
137 there are no changes to fan speed. Once the temperature leaves the interval, fan
138 speed increases (if temperature is higher that desired) or decreases (if
147 pwm[1-5]_step_up_time milliseconds before fan speed is increased
148 pwm[1-5]_step_down_time milliseconds before fan speed is decreased
156 This modes tries to keep the fan speed constant.
158 fan[1-5]_target Target fan speed
160 Target speed tolerance
168 This mode offers multiple slopes to control the fan speed. The slopes can be
174 critical temperature mode, in which the fans should run at full speed.
187 pwm[1-5]_step_up_time milliseconds before fan speed is increased
188 pwm[1-5]_step_down_time milliseconds before fan speed is decreased