Lines Matching refs:and

5   * SMSC LPC47M192, LPC47M15x, LPC47M292 and LPC47M997
10                The LPC47M15x, LPC47M292 and LPC47M997 are compatible for
15         of the code and many helpful comments and suggestions.
22 of the SMSC LPC47M192 and compatible Super-I/O chips.
24 These chips support 3 temperature channels and 8 voltage inputs
27 They do also have fan monitoring and control capabilities, but the
28 these features are accessed via ISA bus and are not supported by this
29 driver. Use the 'smsc47m1' driver for fan monitoring and control.
31 Voltages and temperatures are measured by an 8-bit ADC, the resolution
37 Both voltage and temperature values are scaled by 1000, the sys files
38 show voltages in mV and temperatures in units of 0.001 degC.
43 The default setting is to use the pin as 12V input, and use only 4 bit VID.
48 The temperature and voltage readings are updated once every 1.5 seconds.
66 in[0-7]_max	- lower and upper alarm thresholds for in[0-7]_input reading
68 		  All voltages are read and written in mV.
78 temp[1-3]_max	- lower and upper alarm thresholds for temperatures
83 		  Note that temp1 and temp2 offsets share the same register,
88 		  All temperatures and offsets are read and written in
93 temp[2-3]_input_fault - diode fault flags for temperature inputs 2 and 3.
102 		  The *_min, *_max, *_offset and vrm files can be read and