Lines Matching refs:this
36 Changes in this document are marked with '***CHANGEx' where x representing
53 ***CHANGE0.6: New since this version.
55 Also to be preset by the HL-driver. With this value the HL-driver
60 To be preset by the HL-driver. Using this field, the HL-driver
61 announces the features supported. At the moment this is limited to
62 report the supported layer2 and layer3-protocols. For setting this
75 initialize this field to 0.
82 packets by calling this function. Upon calling, the HL-driver must
140 If this is !0, the driver has to signal the delivery
141 by sending an ISDN_STAT_BSENT. If this is 0, the driver
157 this function is not supported, the driver has to set NULL here.
169 ***CHANGEI1.14: The driver-Id and channel-number are new since this revision.
181 this function is not supported, the driver has to set NULL here.
193 ***CHANGEI1.14: The driver-Id and channel-number are new since this revision.
199 ***CHANGE0.7: New since this version.
206 line1 etc.) It is recommended to make this string configurable during
207 module-load-time. (copy a global variable to this string.) For doing that,
227 etc.) For this purpose, in the LL all ioctl-calls with an argument
228 >= IIOCDRVCTL (0x100) will be handed transparently to this
264 ***CHANGE0.7.1: New since this version: ServiceIndicator and AddInfo.
268 With this command, the HL-driver is told to accept a D-Channel-setup.
279 With this command, the HL-driver is told to perform a B-Channel-setup.
290 With this command, the HL-driver is told to hangup (B-Channel if
302 With this command, the HL-driver is told not to signal incoming
313 With this command, the HL-driver is told to signal incoming calls for
324 ***CHANGE0.6: New since this version the "empty-string"-feature.
328 With this command, the HL-driver is told to report the current setting
339 With this command, the HL-driver is told to signal only incoming
350 With this command, the HL-driver is told to return the current
361 With this command, the HL-driver is told to select the given Layer-2-
376 With this command, the HL-driver is told to return the current
389 With this command, the HL-driver is told to select the given Layer-3-
404 With this command, the HL-driver is told to return the current
417 With this command, the HL-driver is told to proceed with a incoming call.
428 With this command, the HL-driver is told to alert a proceeding call.
439 With this command, the HL-driver is told to redirect a call in proceeding
452 With this call, the LL-driver invokes protocol specific features through
468 With this command the HL-driver receives a fax sub-command.
484 starting with 0) to which this event applies. (Exception: STAVAIL-event)
490 With this call, the HL-driver signals the availability of new data
503 With this call, the HL-driver signals an incoming call to the LL.
519 0 = No device matching this call.
520 1 = At least one device matching this call (RING on ttyI).
521 HL-driver may send ALERTING on the D-channel in this case.
542 With this call, the HL-driver signals availability of the ISDN-card.
553 With this call, the HL-driver signals unavailability of the ISDN-card.
564 With this call, the HL-driver signals the successful establishment of
575 With this call, the HL-driver signals the successful establishment of
579 The HL driver should call this when the logical l2/l3 protocol
592 With this call, the HL-driver signals the shutdown of a
605 With this call, the HL-driver signals the shutdown of a
609 The HL driver should call this as soon as the logical l2/l3 protocol
620 With this call, the HL-driver delivers charge-unit information to the
633 With this call, the HL-driver signals that it will be unloaded now. This
644 With this call the HL-driver signals the delivery of a data-packet.
646 does not need this call.
653 the driver has to set this to the original length
658 With this call, the driver has to respond to a prior ISDN_CMD_DIAL, if
673 the real amount, perform this call, allocating additional channels.
683 With this call, the HL-driver delivers CAUSE-messages to the LL.
684 Currently the LL does not use this messages. Their contents is simply
696 With this call, the HL-driver delivers DISPLAY-messages to the LL.
697 Currently the LL does not use this messages.
707 With this call, the HL-driver delivers protocol specific infos to the LL.
721 With this call, the HL-driver signals the LL to disable or enable the
751 With this call the HL-driver signals a fax sub-command to the LL.