Lines Matching refs:with
11 register_isdn() with a pointer to that struct. Prior to that, it has
36 Changes in this document are marked with '***CHANGEx' where x representing
37 the version number. If that number starts with 0, it refers to the old,
38 separately distributed package. If it starts with one of the letters
87 int Channel-number locally to the driver. (starting with 0)
99 fields are described together with the descriptions of the possible
114 setup, etc. The exact meaning of the parameters is described with the
138 int channel-number locally to the HL-driver. (starts with 0)
167 int channel-number locally to the HL-driver. (starts with 0)
191 int channel-number locally to the HL-driver. (starts with 0)
227 etc.) For this purpose, in the LL all ioctl-calls with an argument
232 called with the field command set to 1.
238 parm.num = first bytes filled with (unsigned long)arg
252 arg = channel-number locally to the driver. (starting with 0)
261 start with an "S".
274 arg = channel-number locally to the driver. (starting with 0)
285 arg = channel-number locally to the driver. (starting with 0)
297 arg = channel-number locally to the driver. (starting with 0)
308 arg = channel-number locally to the driver. (starting with 0)
319 arg = channel-number locally to the driver. (starting with 0)
329 given with ISDN_CMD_SETEAZ.
334 arg = channel-number locally to the driver. (starting with 0)
340 calls with the given Service-Indicators.
345 arg = channel-number locally to the driver. (starting with 0)
356 arg = channel-number locally to the driver. (starting with 0)
369 arg = channel-number locally to the driver. (starting with 0)
370 logical or'ed with (protocol-Id << 8)
382 arg = channel-number locally to the driver. (starting with 0)
397 arg = channel-number locally to the driver. (starting with 0)
398 logical or'ed with (protocol-Id << 8)
410 arg = channel-number locally to the driver. (starting with 0)
417 With this command, the HL-driver is told to proceed with a incoming call.
422 arg = channel-number locally to the driver. (starting with 0)
423 setup.eazmsn= empty string or string send as uus1 in DSS1 with
433 arg = channel-number locally to the driver. (starting with 0)
434 setup.eazmsn= empty string or string send as uus1 in DSS1 with
445 arg = channel-number locally to the driver. (starting with 0)
474 arg = channel-number locally to the driver. (starting with 0)
482 to be set by the HL-driver with the appropriate Status-Id (event-number).
484 starting with 0) to which this event applies. (Exception: STAVAIL-event)
510 arg = channel-number, locally to the driver. (starting with 0)
525 Used for signalling with PtP connections.
529 para.setup.eazmsn may be filled with an uus1 message of
534 para.setup.eazmsn may be filled with an uus1 message of
570 arg = channel-number, locally to the driver. (starting with 0)
585 arg = channel-number, locally to the driver. (starting with 0)
600 arg = channel-number, locally to the driver. (starting with 0)
615 arg = channel-number, locally to the driver. (starting with 0)
626 arg = channel-number, locally to the driver. (starting with 0)
651 arg = channel-number, locally to the driver. (starting with 0)
664 arg = channel-number, locally to the driver. (starting with 0)
691 arg = channel-number, locally to the driver. (starting with 0)
702 arg = channel-number, locally to the driver. (starting with 0)
733 arg = channel-number, locally to the driver. (starting with 0)
746 arg = channel-number, locally to the driver. (starting with 0)
757 arg = channel-number, locally to the driver. (starting with 0)