Lines Matching refs:with
1 HiSax is a Linux hardware-level driver for passive ISDN cards with Siemens
4 It is meant to be used with isdn4linux, an ISDN link-level module for Linux
18 along with this program; if not, write to the Free Software
62 Siemens I-Surf 2.0 (with IPAC, try type 12 asuscom)
78 If you know other passive cards with the Siemens chipset, please let me know.
88 with LILO or LOADLIN or, if built as a module, using insmod/modprobe with
95 needed to be configured with isapnp and worked only with the HiSax
123 won't work with the current modules package.
168 10 ELSA PCMCIA irq, io (set with card manager)
183 22 Sedlbauer Speed Star (PCMCIA) irq, io (set with card manager)
187 26 AVM A1 PCMCIA (Fritz!) irq, io (set with card manager)
202 39 HFC 2BDS0 SP/PCMCIA irq,io (set with cardmgr)
206 At the moment IRQ sharing is only possible with PCI cards. Please make sure
224 5. Teles 16.3 PnP, Euro ISDN, with isapnp configured
248 b) using LILO/LOADLIN, with the driver compiled directly into the kernel
265 idstring = Driver ID for accessing the particular card with utility
269 Note: the ID string must start with an alphabetical character!
283 10 ELSA PCMCIA pa=irq, pb=io (set with card manager)
298 22 Sedlbauer Speed Star (PCMCIA) pa=irq, pb=io (set with card manager)
302 26 AVM A1 PCMCIA (Fritz!) pa=irq, pb=io (set with card manager)
324 When you insmod isdn.o and hisax.o (or with the in-kernel version, during
349 string MUST NOT start with a digit or a small 'x'!
353 At the moment, debugging messages are enabled with the hisaxctrl tool:
395 0x0400 D-Channel frames for isdnlog (set with 1 0x4 too)
407 Because of some obscure problems with some switch equipment, the delay
409 configurable with
418 The firmware is downloaded with the hisaxctrl tool:
476 My girl friend and partner in life Ute for her patience with me.
514 the driver with lilo:
542 In the line starting with "append" you have to adapt the parameters