Lines Matching refs:drive

21 Issuing this command should cause the drive to switch to idle mode and
25 the internal hard drive and park its heads on the ramp when critical
43 of the respective drive off the platter and block all I/O operations
61 For example, do the following in order to park the heads of drive
96 the same port as the hard drive, it generally *should* recover just
100 instead of /dev/sda), then parking the heads of one drive (drive X)
101 will generally not affect the mode of operation of another drive
102 (drive Y) on the same port as described above. It is only when a port
103 reset is required to recover from an exception on drive Y that further
104 I/O operations on that drive (and the reset itself) will be delayed
105 until drive X is no longer in the parked state.
113 laptop or the hard drive itself told you so), then you can tell the
114 kernel to enable the usage of this feature for that drive by writing