Lines Matching refs:radio

44 radio operation and to ensure electromagnetic compliance (EMC). These
65 system configuration do not cause the EMC and radio operation to be
116 For example, to disable the radio on driver loading, enter:
163 	0 = RF kill not enabled (radio on)
164 	1 = SW based RF kill active (radio off)
165 	2 = HW based RF kill active (radio off)
166 	3 = Both HW and SW RF kill active (radio off)
168 	0 = If SW based RF kill active, turn the radio back on
169 	1 = If radio is on, activate SW based RF kill
172   	based RF kill from ON -> OFF -> ON, the radio will NOT come back on
177 Most laptops provide the ability for the user to physically disable the radio.
179 software to turn the radio off and on.  On other laptops, however, the switch
181 calls to turn the radio off and on.  This is referred to as a "software based
211 Power management works by powering down the radio after a certain 
213 radio.  Once powered down, the radio remains in that state for a given 
217 When the radio is asleep, the access point sending data to the station 
229 	iwconfig eth1 power off    Disables radio power down
230 	iwconfig eth1 power on     Enables radio power management to 
246 wait before powering the radio and querying the access point for buffered