Lines Matching refs:addresses
243 generated via ARP probes issued for the addresses specified by
261 Specifies the IP addresses to use as ARP monitoring peers when
265 addresses must be separated by a comma. At least one IP
268 default value is no IP addresses.
617 different peers use different hardware addresses for
804 Uses XOR of hardware MAC addresses and packet type ID
820 Uses XOR of hardware MAC addresses and IP addresses to
830 addresses are first hashed using ipv6_addr_hash.
861 addresses are first hashed using ipv6_addr_hash.
996 devices (the MAC addresses correspond to those of the slave devices).
1449 NOTE: up to 16 target addresses may be specified.
1720 IP addresses. The transmit policy of the two peers does not need to
2206 will be addressed directly by their individual MAC addresses.
2210 available use the MAC addresses of the local network source and
2246 (instead choosing a port based upon IP or MAC level addresses);
2273 addresses involved, this mode works best in a "local" network
2302 distributes traffic by peer (using an XOR of MAC addresses
2320 so that mathematically unlucky MAC addresses (i.e., ones that
2674 When using slave devices that have fixed MAC addresses, or when
2701 To restore your slaves' MAC addresses, you need to detach them
2703 then restore the MAC addresses that the slaves had before they were