Lines Matching refs:and
2 RISC-based, Bus-Mastering, Fast (10 Mhz) and Ultra (20 Mhz) Narrow
3 (8-bit transfer) SCSI Host Adapters for the ISA, EISA, VL, and PCI
4 buses and RISC-based, Bus-Mastering, Ultra (20 Mhz) Wide (16-bit
9 cache and board LRAM. A CDB is a single SCSI command. The driver
55 ABP3950U2W - Bus-Master PCI LVD/Ultra2-Wide and Ultra-Wide (253 CDB)
58 Driver Compile Time Options and Debugging
69 detect problems with the driver and facilitate fixing these
75 Enabling this option adds tracing functions to the driver and the
78 of the driver execution image and add overhead to the execution of
85 If the driver is loaded at boot time and the LILO Driver Option
89 'deb' and the fourth hex digit specifies the debug level: 0 - F.
91 and set the debug level to 2.
108 a. System and kernel logging is enabled (syslogd, klogd running).
118 current console. Refer to the klogd(8) and syslogd(8) man pages
132 and written to the console or log file.
136 Enabling this option adds statistics collection and display
138 monitoring driver and device performance. It will add to the
139 size of the driver execution image and add minor overhead to
143 point call counts and transfer size counts are maintained.
156 contain adapter and device configuration information.
162 recognize the 'advansys' LILO command line and /etc/lilo.conf option.
164 scanning to 1 - 4 I/O ports. Regardless of the option setting EISA and
165 PCI boards will still be searched for and detected. This option only
166 affects searching for ISA and VL boards.
179 the 'asc_iopflag' variable and 'asc_ioport' array when loading
186 the 'Driver Compile Time Options and Debugging' section above for
192 and maintained it up to 3.3F. He continues to answer questions
193 and help maintain the driver.
195 Nathan Hartwell <mage@cdc3.cdc.net> provided the directions and
212 Doug Gilbert <dgilbert@interlog.com> has made changes and
213 suggestions to improve the driver and done a lot of testing.
219 patch and helped with PowerPC wide and narrow board support.
235 board support and fixed a bug in AscGetEEPConfig().